《安全很有事》德國萊因TÜV官方部落格丨TÜV 莱茵大中华区博客

德國萊因TÜV認證 TÜV Rheinland Accreditation

Kenya 肯亞

德國萊因TÜV集團獲肯亞標準局 (KEBS) 授權，可為肯亞市場簽發合格證書 (CoC)

德國萊因TÜV集團已獲得肯亞標準局 (KEBS) 授權，可為肯亞市場簽發合格證書 (CoC)。所有進口至肯亞的貨物，除屬於豁免清單、限制清單或禁止清單外，均須在裝運前在出口國進行強制性認證。如有任何關於肯亞合格證書要求的問題，請隨時聯繫德國萊因TÜV集團。

TÜV Rheinland has been authorized by Kenya Bureau of Standards (KEBS) to issue Certificates of Conformity (CoCs) for the Kenyan market for a period of three years.
All imported goods destined to Kenya shall undergo mandatory certification in the country of export prior to shipment, unless they fall under any exempted list, restricted, or prohibited list.
Sould you have any quesitons to Kenya CoC requirement, please do not hesitate to contact TÜV Rheinland Group.

資訊 / 電信 ITE / Telecom

Algeria 阿爾及利亞

阿爾及利亞郵政和電子通信監管局 (ARPCE) 於2026年2月22日頒佈了第26-97號法令，對型式批准程式進行了更新。主要變更包括：
• 證書的有效期由3年變成5年
• 推出新的線上申請提交平台
提交申請和寄送樣品仍需通過一家阿爾及利亞當地公司辦理。

The Autorité de Régulation de la Poste et des Communications Électroniques (ARPCE) in Algeria issued Decree No. 26-97 on February 22, 2026, which updates Type Approval procedures. The main changes include:
• Certificate validity has been extended from 3 years to 5 years.
• The launch of a new online platform for submitting applications
A local Algerian company is still required for application submission and delivery of samples.

Argentina 阿根廷

阿根廷發佈對ENACOM認證框架的更新

2026年2月26日，阿根廷國家通訊管理局 (ENACOM) 發佈第57/2026號決議，撤銷了先前的主要決議729/1980，旨在建立一套全新的審批體系，以簡化和現代化阿根廷的電信設備認證流程。
本次更新的關鍵點如下：
• 新版RAMATEL法規框架將於2026年9月1日生效。
在該日期之前，現行ENACOM審批流程仍保持原有效力。
• 根據第586/2023號決議，獲批設備上市仍須強制標注RAMATEL監管標誌。
線上銷售時，賣方與電商平台均須在每件商品資訊中清晰展示對應的RAMATEL識別碼。
• 引入認證機構
設立本地協力廠商認證機構負責簽發符合性證書。
該機構須經阿根廷認證機構OAA依據IRAM ISO/IEC 17065標準正式認可。
• 檢測實驗室需獲得OAA認證
本地實驗室須經阿根廷認證機構OAA依據IRAM ISO/IEC 17025標準正式認可。
現有ENACOM認可實驗室享有2年過渡期以獲取認證。
• ENACOM證書現接受家族型號認證
新規框架允許將家族型號納入單份ENACOM認證證書。
• 電信設備商業化仍需強制獲取ENACOM認證
認證的電信設備現分為A類 (消費類產品) 和B類 (專業用途)
• ENACOM認證證書將不再設有效期
但A類設備須每兩年接受認證機構的監督審查。
B類設備無需接受監督流程
• 現有有效ENACOM證書的有效期將延長三年，至2029年2月26日。
此後必須根據新法規框架進行續期和重新認證。

On February 26th, 2026 the National Communications Entity (ENACOM) published Resolution 57/2026 to revoke the former main Resolution 729/1980, in order to establish a complete new approval scheme that aims to simplify and modernize Telecom Equipment Certification in Argentina.
The keypoints for these updates are as follows:
• The new RAMATEL regulation framework becomes effective on September 1st, 2026.
o Until that date, the current ENACOM approval process still remains in force as it is.
• RAMATEL regulatory marking remains mandatory for the commercialization of approved devices based on Res. 586/2023.
o For online sales, both sellers and marketplace platforms will now be required to clearly display the corresponding RAMATEL ID number in each product listing.
• Introduction of Certification Agencies
o The incorporation of local third-party Certification Bodies to be responsible for issuing Certificates of Conformity.
o They must be duly accredited by OAA (Argentinean Accreditation Body) under IRAM ISO/IEC 17065.
• Testing Laboratories now require OAA Accreditation
o Local labs will need to be duly accredited by the OAA (Argentinean Accreditation Body) under IRAM ISO/IEC 17025.
o Existing ENACOM recognized laboratories have a grace period of 2 years to seek accreditation.
• Family Approval is now accepted on ENACOM Certificates
o The new regulation frameworks accepts the concept of family models to be included on a single ENACOM Homologation Certificate
• ENACOM Approval remains mandatory for the commercialization of telecommunications devices
o Telecommunication devices subject to homologation are now classified as Class A (Consumer Products) and Class B (Professional Use)
• ENACOM Homologation Certificates will have no expiration date
o However, Class A devicesare subject to a surveillance process every 2 (two) years performed by Certification Agency.
o Class B devices will not require a surveillance process
• Existing ENACOM Certificates that are currently valid will have a their validity extended for 3 (three) additional years, until February 26th, 2029.
o After that date, they must be renewed and recertified in accordance with the new regulatory framework.

Bolivia 玻利維亞

玻利維亞再度更新需型式認證的電信產品清單

2026年3月，玻利維亞電信和運輸監管與審計局 (ATT) 再度更新需型式認證的電信產品清單，更新後的電信設備認證清單於 2026 年 3 月起生效。該清單此前於 2026 年 2 月 25 日更新。在更新清單發佈之日前提交的申請仍適用之前的清單要求。清單發佈後提交的申請則必須符合新清單的要求。

The Autoridad de Regulación y Fiscalización de Telecomunicaciones y Transportes (ATT) in Bolivia announced the updated list of telecommunications equipment subject to homologation will come into effect starting March 2026.
The list was updated on February 25, 2026. Applications submitted up until to the date of publication of the updated list will follow the previous list requirements. Applications submitted after the publication of the updated list must conform to the new list.

Chile 智利

智利SUBTEL就啟用600MHz頻段進行IMT通信公開徵求意見

[法規草案] 2026年3月10日，智利電信部 (SUBTEL) 就將600MHz頻段用於IMT通信業務公開徵求意見。意見徵集截至2026年4月9日。

On March 10, 2026, the Chilean Subsecretaria de Telecomunicaciones (SUBTEL) publicly solicited opinions on the use of the 600MHz frequency band for IMT communication services. The final date to give comments is April 9, 2026.

Colombia 哥倫比亞

哥倫比亞更新國家頻率分配表 (CNABF)

哥倫比亞國家頻譜管理局 (ANE) 於 2026 年發布了第 000028 號決議，更新了國家頻率分配表 (CNABF)，重點優化了 900 MHz 頻段。此次修訂允許該頻段支援更廣泛的無線電通訊服務，不再局限於先前預留用於國際行動通訊 (IMT) 的服務，從而改善偏遠和脆弱地區的通訊連接。

The National Spectrum Agency (ANE) of Colombia has issued Resolution 000028 of 2026 to update the National Frequency Allocation Table (CNABF), specifically targeting the optimization of the 900 MHz band. This amendment allows the band to support a wider range of radiocommunication services beyond its previous reservation for International Mobile Telecommunications (IMT) to improve connectivity in remote and vulnerable areas.

Egypt 埃及

埃及NTRA發布型號核准程序的最新資訊

埃及國家電信監管局 (NTRA) 發布了型號核准程序的最新資訊。所有型號核准方案 (輕型、中型和嚴格型方案) 的申請方式均已統一，本地和海外公司均需透過數位化型號核准入口網站進行申請。

The National Telecommunications Regulatory Authority (NTRA) of Egypt announced updates on Type Approval procedure. All Type Approval Schemes (Light, Intermediate and Tight Schemes), the method to apply for Type Approval is unified to be through digital Type Approval portal for both Local and overseas companies.

Hong Kong 香港

香港通訊事務管理局更新865-868 MHz及920-925 MHz頻段設備的性能規範

香港通訊事務管理局 (OFCA)於2026年3月18日發佈了以下性能規範:
• HKCA 1078 – 第2版 – 工作於920-925 MHz頻段的無線電設備性能規範
• HKCA 1049 – 第2版 – 工作於865-868 MHz和/或920-925 MHz頻段的射頻識別 (RFID) 設備性能規範

Hong Kong OFCA Updates Specifications for Devices in the 865-868 MHz and 920-925 MHz Bands.
The Office of the Communications Authority (OFCA) in Hong Kong published the following Performance Specifications on March 18, 2026:
•HKCA 1078 – Issue 2 – Performance Specification for Radio Equipment operating in the 920-925 MHz Band
•HKCA 1049 – Issue 2 – Performance Specification for Radio Frequency Identification (RFID) Equipment Operating in the 865-868 MHz and/or 920-925 MHz Bands

India 印度

印度將 IS 18112:2022 (電視機) 的實施日期延至 2026 年 7 月 26 日

印度將 IS 18112:2022《衛星廣播傳輸數位電視接收機—電視機規範》的實施日期延至 2026 年 7 月 26 日。

India postpones the implementation date for IS 18112:2022 Digital Television Receiver for Satellite Broadcast Transmission – Specification for Television Sets till Jul-26 of 2026.

India 印度

印度發布針對5G開放式無線存取網 (O-RAN) 的ITSAR要求)

印度發布了針對5G開放式無線存取網 (O-RAN) 的ITSAR (印度電信安全保障要求): RIC。實施日期尚未確定。

India publishes ITSAR (Indian Telecom Security Assurance Requirements) for Open Radio Access Network (O-RAN) of 5G: RIC. The implementation date is not determined yet.

India 印度

印度DoT發佈已獲證設備啟用 5925-6425 MHz 頻段的要求

印度電信部 (DoT) 此前於2026年1月20日發佈了將5925-6425MHz頻段用於免許可應用的公告。DoT注意到有部分產品此前在支援但禁用5925-6425MHz的前提下獲得了證書。DoT於2026年3月6日再次發佈通知，闡述了根據修訂後的監管框架啟用5925-6425MHz頻段的合規要求。對於能夠在5925-6425MHz 頻段運行但僅獲得2.4GHz和/或5GHz頻段證書的產品的利益相關方，應重新申請新證書來啟用5925-6425MHz頻段。這些必要步驟須在2026年4月5日之前完成。除非獲得新的證書授權，否則不得啟用、啟動或使用5925-6425 MHz頻段。

The Ministry of Telecommunications (DoT) of India previously issued an announcement on January 20, 2026, to use the 5925-6425MHz frequency band for license-exempt applications. The DoT noted that some products had previously received certificates which supported but disabled 5925-6425MHz. The DoT issued another notice on March 6, 2026, setting out the compliance requirements for enabling the 5925-6425MHz band under the revised regulatory framework. Stakeholders of products capable of operating in the 5925-6425MHz band but only obtaining certificates for the 2.4GHz and/or 5GHz bands should reapply for a new certificate to enable the 5925-6425MHz band. These necessary steps must be completed by April 5, 2026. The 5925-6425 MHz band may not be enabled, activated, or used unless a new certificate authorization is obtained.

Indonesia 印尼

印尼發佈關於行動通訊設備和平板電腦特定吸收率限制的草案

[法規草案] 通訊和數位部長公佈了關於行動通訊設備和平板電腦特定吸收率限制的通訊和數位技術部長令草案。該通訊和數位部長令草案將取代2024年第177號通訊和資訊部長令，該法令同樣涉及行動通訊設備和平板電腦的特定吸收率限制。

The Minister of Communication and Digital announced the Draft Decree of the Minister of Communication and Digital Technology concerning Specific Absorption Rate Limits on Mobile Telecommunications Devices and Tablet Computers. The Draft Decree of the Minister of Communication and Digital concerning Specific Absorption Rate Limits on Mobile Telecommunication Devices and Tablet Computers will replace the Decree of the Minister of Communication and Informatics Number 177 of 2024 concerning Specific Absorption Rate Limits on Mobile Telecommunication Devices and Tablet Computers.

Malaysia 馬來西亞

馬來西亞MCMC提醒UWB設備禁止使用3300MHz~3400MHz頻段

2026年2月11日，馬來西亞通信及多媒體委員會 (MCMC) 發佈公告：MCMC將取消《2025年第2版通信產品類別分配表》(Class Assignment No.2 of 2025) 中關於UWB設備附表中3300-3400MHz的頻譜分配。而該分配表中已規定3400-3700Mz頻段分配的有效期至2025年5月31日，因此自2026年4月1日起，UWB設備在馬來西亞不可使用3300-3700MHz頻段，可使用頻段為3700-10600MHz。

On February 11, 2026, the Malaysian Communications and Multimedia Commission (MCMC) announced that MCMC will cancel the spectrum allocation of 3300-3400MHz in the Class Assignment No.2 of 2025 for UWB equipment. The allocation table has stipulated that the allocation of the 3400-3700Mz band will be valid until May 31, 2025, so from April 1, 2026, UWB equipment will not be able to use the 3300-3700MHz frequency band in Malaysia, and the frequency band can be used is 3700-10600MHz.

Nigeria 奈及利亞

奈及利亞發布《2026 年 6 GHz (5925 – 6425) MHz 頻段低頻段使用框架》和《2026 年 60GHz 頻段多千兆無線網路使用指南》

奈及利亞發布《2026 年 6 GHz (5925 – 6425) MHz 頻段低頻段使用框架》和《2026 年 60GHz 頻段多千兆無線網路使用指南》。

Nigeria publishes Framework for the use of the lower part of the 6 GHz (5925 – 6425) MHz band 2026 and Guidelines for the Use of the 60GHz Band for Multi Gigabit Wireless 2026.

Philippines 菲律賓

菲律賓擬發佈行動電源和可攜式電源組產品認證許可技術規定

[法規草案] 2026年2月27日，菲律賓DTI提交G/TBT/N/PHL/357號通報，計畫發佈行動電源和可攜式電源組強制性產品認證技術規定草案。該草案旨在嚴格確保在菲律賓進口、製造、分銷或銷售的行動電源和可擕式電源組符合規定的安全要求。
適用範圍:
由直流電源供電，或通過直接插接結構由交流市電電源供電的行動電源及可攜式電源裝置；提供直流輸出的行動電源；可攜式電源裝置，包括但不限於搭電線元件、插座、直流電連接器、車載適配器插座、USB連接器以及感應式電力發射器等
PS認證計畫:
法規提到，PS安全認證標誌許可計畫 (PS Safety Certification Mark Licensing Scheme，簡稱為PS許可計畫) 將面向在菲律賓市場銷售或分銷行動電源 (充電寶) 及可擕式電源裝置的本地和國外製造商/組裝商開放。對於符合相關要求的公司，將授予PS許可標誌。
持有有效PS許可證的本地公司：年度工廠審核+市場隨機抽檢。
持有有效PS許可證的外國公司：年度工廠審核+每批次貨物到貨檢驗。
進口商品清關 (ICC) 認證標誌計畫:
適用於未獲PS認證的行動電源 (充電寶) 及可攜式電源裝置的進口商，僅對當次報關批次有效，需逐批申請。
注意事項:
每份PS許可證申請均須針對特定工廠、生產設施或場地提出。若申請人為境外製造商/組裝商，必須由境外製造商/組裝商在菲律賓合法註冊的本地分支機搆、代表處或代理機構提交申請。凡進口由外國製造商/組裝商獲得有效PS許可證所涵蓋的行動電源和可攜式電源設備的企業，均需根據每批貨物、每份提單/航空貨運單的情況申請確認聲明(SOC)，以確保所進口的產品源自持有有效PS許可證的公司。
PS許可證自簽發之日起生效，有效期為3年。

On 27 February 2026, Department of Trade and Industry of Bureau of Philippine Standards, published Draft Technical Regulation for the Mandatory Product Certification of Power Banks and Portable Power Pack.
This DAO aims to strictly ensure that power banks and portable power packs to be imported, manufactured, distributed, or sold in the Philippines meet the specified safety requirements.
This Technical Regulation prescribes the mandatory product certification of power banks and portable power packs whether locally manufactured or imported, as follows:
– Power banks and portable power packs devices with an input voltage supplied by DC power source with rated maximum up to 60 Vdc, or by an AC mains power source through direct plug in construction;
– Power banks that provide DC output(s) with rated maximum up to 60 Vdc;
– Portable power packs with at least one output option such as, but not limited to booster cable assemblies, receptacles, DC connectors, vehicle adapter sockets, USB connectors, and induction power transmitters. Additional outputs are not restricted;
– Power banks and portable power packs with integral photovoltaic cells as a power source; and
– Power banks and portable power packs that are incorporated with and/or forms integral part of another device

Saudi Arabia 沙烏地阿拉伯

SASO 推遲實施 USB Type-C 測試報告的要求至2026年5月1日

SASO 已決定推遲實施 USB Type-C 測試報告的要求。在 2026 年 5 月 1 日之前，仍可接受企業自行聲明作為符合 USB Type-C 要求的證明。

SASO has decided to postpone the implementation of the requirement to provide USB Type-C test reports. Until 1 May 2026, a self-declaration will continue to be accepted as proof of compliance with the USB Type-C requirements.

Saudi Arabia 沙烏地阿拉伯

沙烏地阿拉伯發布《網路安全服務、產品和解決方案許可監管框架》

沙烏地阿拉伯發布了《網路安全服務、產品和解決方案許可監管框架》。該框架旨在透過明確被授權者的責任和義務，規範沙烏地阿拉伯境內網路安全服務和產品的供應，從而提升此類服務、產品和解決方案在交付給各類實體時的效率和品質。

Saudi Arabia issued Regulatory Framework for Licensing Cybersecurity Services, Products and Solutions.
This Framework aims to regulate the provision of cybersecurity services and products in the Kingdom through a regulatory framework that defines the responsibilities and obligations of the licensee, contributing to promoting the efficiency and quality of such services, products, and solutions during their delivery to various entities.

Singapore 新加坡

新加坡發布蜂窩行動終端技術規範

2026年3月6日，新加坡資訊通信媒體發展局 (IMDA) 發佈了蜂窩移動終端技術規範 (IMDA TS CMT Issue 1 Rev 4)。該技術規範的更新內容包括：
自2026年12月31日起，所有手機必須預設禁用2G網路；
自2026年4月1日起，所有手機必須具備緊急社區廣播功能；
在上述日期之前達到產品生命週期結束 (EOL) 的設備不受上述要求的約束。

On March 6, 2026, the Infocomm Media Development Authority (IMDA) of Singapore published the Technical Specification for Cellular Mobile Terminals (IMDA TS CMT Issue 1 Rev 4). Updates to the specification include:
From December 31, 2026, all phones must disable 2G networks by default;
From April 1, 2026, all mobile phones must have emergency community broadcasting functions;
Devices that reach the end of product life (EOL) before the above date are not subject to the above requirements.

Singapore 新加坡

新加坡網路安全局與日本經濟產業省相互認可物聯網網路安全計畫

新加坡網路安全局 (CSA)於2026年3月18日發佈新聞稿，宣佈CSA與日本經濟產業省 (METI) 已簽署合作備忘錄 (MoC)，相互認可物聯網網路安全認證體系CLS和JC-STAR。該合作備忘錄將於2026年6月1日起生效。

Singapore CSA and Japan METI Mutually Recognize IoT Cybersecurity Schemes
The Cyber Security Agency (CSA) of Singapore issued a press release on March 18, 2026, announcing that CSA and the Ministry of Economy, Trade, and Industry (METI) in Japan have signed a Memorandum of Cooperation (MoC) to mutually recognize IoT cybersecurity labelling schemes CLS and JC-STAR. This MoC will take effect starting June 1, 2026.

Singapore 新加坡

新加坡網路安全局更新家用路由器強制性要求

新加坡網路安全局 (CSA) 於2026年3月2日發佈新聞稿，宣佈CSA與資訊通信媒體發展局 (IMDA) 將於2027年底前，將家用路由器的強制性網路安全要求從“網路安全標籤計畫”一級提升至二級。

Singapore CSA Updates Mandatory Requirements for Residential Routers
The Cyber Security Agency (CSA) of Singapore issued a press release on March 2, 2026 announcing that CSA and Infocomm Media Development Authority (IMDA) will raise mandatory cybersecurity requirements from Cybersecurity Labelling Scheme Level 1 to Level 2 for residential routers by the end of 2027.

South Korea 韓國

韓國MSIT發佈2026-9號公告提高6GHz Wi-Fi功率限值

2026年2月10日，韓國科學技術資訊通信部 (MSIT) 發佈了2026-9號公告，修訂了免許可無線電設備的技術標準，以支援工業基礎設施建設並提升用戶便利性。其中主要修訂如下：
Wi-Fi 7 (6GHz 頻段): 提高室內和地鐵環境6GHz頻段功率限制，以增強高速連接，其中在5925-6425MHz頻段，室內和地鐵車廂內允許1W EIRP，此前該頻段僅允許0.5W EIRP；在6425-7125MHz頻段室內環境仍然允許0.5W EIRP；
高級藍牙：更新技術標準，納入最新藍牙技術使用的新型無線電傳輸格式；
超寬頻 (UWB) 與定位：完善超寬頻 (UWB) 和定位技術的要求，以確保資料傳輸的準確性和節能性。

On February 10, 2026, South Korea’s Ministry of Science and ICT (MSIT) issued Announcement No. 2026-9, revising the technical standards for license-exempt radio equipment to support industrial infrastructure construction and improve user convenience. The main revisions are as follows:

Wi-Fi 7 (6GHz band): Increased power limits for indoor and metro environments to enhance high-speed connectivity, with 1W EIRP allowed indoors and in subway cars in the 5925-6425MHz band, compared to the previous 0.5W EIRP in this band; 0.5W EIRP remains unchanged in the 6425-7125MHz band indoor environment;
Advanced Bluetooth: Updated technical standards to include new radio transmission formats used by the latest Bluetooth technology;
Ultra-wideband (UWB) and positioning: Improve the requirements of ultra-wideband (UWB) and positioning technology to ensure the accuracy and energy efficiency of data transmission.

Vietnam 越南

越南提出貨物和產品可追溯性規定的通知草案

[法規草案] 越南提出工貿部管轄範圍內貨物和產品可追溯性規定的通知草案。
該草案要求貿易商/進口商註冊高風險產品並產生二維碼以確保可追溯性。
該草案徵求意見截止日期為2026年4月20日。

Vietnam proposes Draft Circular stipulating regulations on traceability of goods and products under the management of Ministry of Industry and Trade.
It requires the trader/importer to register the high risk products and generate QR code to ensure traceability.
The draft receives comments till Apr-20 fo 2026.

Ukraine 烏克蘭

烏克蘭批准伺服器和資料儲存產品生態設計要求的技術法規

烏克蘭發布第160/2026號法令，批准伺服器和資料儲存產品生態設計要求的技術法規。該法規依據歐盟第2019/424號條例制定。

Ukraine publishes Decree No. 160/2026 to approve Technical Regulation on Ecodesign Requirements for Servers and Data Storage Products. It is developed based on Regulation (EU) 2019/424.

India 印度

印度 BIS 發佈 IS/IEC 62368-1:2023 換版執行指南草案

[法規草案] 2026年3月9日，印度標準局 (BIS)，根據印度電子和資訊技術部（MeitY）2025年10月29日的公告，發佈IS/IEC 62368-1:2023（音視頻、資訊及通訊科技設備安全要求）新標準的實施指南草案，該標準將取代舊有的 IS 13252 (Part 1):2010 及 IS 616:2017 。
關鍵時間表：並行期與截止日
BIS 針對不同產品類別設定了兩類不同的過渡期限：
1. 擴增實境/虛擬實境 (Extended Reality) 產品
適用物件： AR/VR/MR 設備 。
並行期截止日： 2026年5月1日 。
2. 其他 38 類電子資訊產品
適用物件： 筆記型電腦、手機、電視、電源適配器、印表機、伺服器、智慧手錶、藍牙喇叭等 。
並行期截止日： 2028年11月1日 。
執行指南核心要點
• A. 現有執照持有人 (Existing Licensees)
1.測試要求： 必須針對執照範圍內的所有主檢型號 (Lead Models)，提交由 BIS 認可實驗室出具的 IS/IEC 62368-1:2023 完整測試報告 。
2.系列型號聲明： 需提供承諾書，確認系列中的其他型號也符合新標準要求 。
3.關聯標準：
o電視機： 若更換標準影響到 IS 18112:2025 的合規性，需一併提交相關報告 。
o手機： 若影響到 IS 16333 (Part 3):2022（印度語言支援），需提交相關報告 。
oCCTV： 若影響到 IP 攝像機安全要求，需提交相關報告 。
o注：若無影響，則提交不相關聲明即可 。
• B. 新申請人 (New Applicants)
1.受理規範： 目前仍可選擇按舊標準或新標準申請 。
2.轉換承諾： 若選擇按舊標準申請，必須提交聲明，保證在並行期截止日前完成新標準轉換 。
3.硬性截止： 超過各類別規定的截止日後，BIS 將不再核發舊標準執照 。
• C. 擴展執照範圍 (Change in Scope)
1.增加型號的申請必須在轉換完成前或並行期截止日前 (以較早者為准) 按舊標準辦理，否則必須直接符合新標準

On March 9, 2026, the Bureau of Indian Standards (BIS), based on a notice issued by the Indian Ministry of Electronics and Information Technology (MeitY) on October 29, 2025, released a draft implementation guide for the new standard IS/IEC 62368-1:2023 (Safety Requirements for Audio-Visual, Information and Communication Technology Equipment). This standard will replace the older IS 13252 (Part 1):2010 and IS 616:2017.
Key Timeline: Parallel Period and Deadline
BIS has set two different transition periods for different product categories:
1. Augmented Reality/Virtual Reality (AR/VR/MR) Products
Applicable to: AR/VR/MR devices.
Parallel Period Deadline: May 1, 2026.
2. Other 38 Categories of Electronic Information Products
Applicable to: Laptops, mobile phones, televisions, power adapters, printers, servers, smartwatches, Bluetooth speakers, etc.
Parallel Period Deadline: November 1, 2028.
Key Points of the Implementation Guidelines
• A. Existing Licensees
1. Testing Requirements: A complete test report for IS/IEC 62368-1:2023, issued by a BIS-accredited laboratory, must be submitted for all lead models within the scope of the license.
2. Series Model Declaration: A commitment letter confirming that other models in the series also comply with the new standard requirements is required.
3. Relevant Standards:
o Televisions: If the standard change affects compliance with IS 18112:2025, a relevant report must be submitted.
o Mobile Phones: If it affects IS 16333 (Part 3):2022 (Indian language support), a relevant report must be submitted.
o CCTV: If it affects IP camera security requirements, a relevant report must be submitted.
Note: If there is no impact, submit an irrelevant declaration.
• B. New Applicants
1. Processing Guidelines: Applications can still be submitted under either the old or new standard.
2. Conversion Commitment: If applying under the old standard, a declaration must be submitted guaranteeing completion of the conversion to the new standard before the parallel period deadline.
3. Hard Deadline: After the deadline specified for each category, BIS will no longer issue licenses under the old standard.
• C. Change in Scope
1. Applications adding models must be processed under the old standard before the conversion is completed or before the parallel period deadline (whichever is earlier); otherwise, they must directly comply with the new standard.

India 印度

關於公共採購 (優先採購印度製造產品) 令 (PPP-MII) 中閉路電視攝影機測試要求的澄清

2026年2月4日，印度電子資訊技術部 (MeitY) 發佈通告，透過整合「印度製造優先令」(PPP-MII) 和「強制註冊令」(CRO) 這兩個獨立的監管框架，簡化了閉路電視攝影機的安全合規流程。
• 核心監管更新：統一測試標準：由於CRO和PPP-MII下的安全基本要求 (ER) 相同，因此，為CRO註冊簽發的STQC測試報告現已正式適用於PPP-MII合規。
• 授權機構：所有安全測試必須由STQC局或MeitY指定的機構進行。
• 有效期限：STQC簽發的安全測試報告自簽發之日起有效期限為三年。
• 範圍限制：STQC簽發的安全認證僅限於技術合規性，與PPP-MII要求的本地增值計算無關。

On February 4, 2026, MeitY circular streamlines the security compliance process for CCTV cameras by aligning two separate regulatory frameworks: the PPP-MII Order (Preference to Make in India) and the CRO (Compulsory Registration Order).
• Core Regulatory Updates: Unified Testing Standard: Since the Essential Requirements (ERs) for security are identical under both CRO and PPP-MII, STQC test reports issued for CRO registration are now officially applicable for PPP-MII compliance.
• Authorized Agency: All security testing must be conducted by the STQC Directorate or a MeitY-notified agency.
• Validity Period: Security test reports issued by the STQC remain valid for three years from the date of issuance.
• Scope Limitation: Security certifications issued by STQC are strictly for technical compliance and have no linkage to the calculation of local value addition required under PPP-MII.

Israel 以色列

以色列關於單相16A及以下插頭和插座的強制性標準SI 32第1.1部分第三次修訂將在2026年8月8日生效

關於單相16A及以下插頭和插座的強制性標準SI 32第1.1部分第三次修訂已在以色列官方公報政府公告欄第12252號發布，並將於2026年8月8日生效。

The third amendment to the Mandatory Standard SI 32 part 1.1, dealing with plugs and socket-outlets for single-phase up to 16A, was published in the Israel Official Gazette, Section of Government Notices, no. 12252, and will enter into force on 8 August 2026.

South Korea 韓國

電氣用品及生活用品安全管理運作要領修訂公告_Safety部分物件分類調整

韓國KATS今日發佈編號2026-56國家技術標準公告，2026年4月1日開始KC安規以下幾個產品產品分類出現變更：
吸塵器大類 (吸塵器、蒸汽清洗機、高壓清洗機等)，洗衣機和脫水機大類 (洗衣機、脫水機、洗烘一體機)，電磁爐，烘乾機大類 (烘乾機、烘手機、衣物管理機等)，衛生間用電器大類 (智慧馬桶、智慧坐便器等) 從安全認證物件改成安全確認物件。
改為安全確認之後，這些產品在申請KC safety認證時不需要廠檢。

The Korean Agency for Technology and Standards (KATS) has issued National Technical Standards Notice No. 2026-56. Starting from 1 April 2026, the KC safety regulatory classification for the following product categories has been revised:
• Vacuum cleaner category (including vacuum cleaners, steam cleaners, high-pressure cleaners, etc.)
• Washing machine and spin dryer category (including washing machines, spin dryers, washer-dryer combo units)
• Induction cooktops
• Dryer category (including dryers, hand dryers, garment care appliances, etc.)
• Bathroom electrical appliances (including smart toilets, electronic bidet seats, etc.)
These products have been reclassified from Safety Certification to Safety Confirmation.
Afte being reclassified under Safety Confirmation, these products will no longer require factory inspection when applying for KC safety certification.

Oman 阿曼

阿曼個人電動代步工具 (電動滑板車) 技術法規

阿曼標準化與計量總局 (DGSM) 已於 2025 年 10 月 30 日 通過了個人電動代步工具的技術要求，適用於以下產品類別：
1.無座椅電動滑板車 (包括具可拆卸座椅的滑板車)
2.有或無座椅的自平衡交通工具 (如平衡車)
3.有或無座椅的電動獨輪車
4.配件與元件 (如電池、充電器／轉接器)
進口商必須為每批貨物出具 符合性聲明 (Declaration of Conformity)。
產品在投放市場前，必須依照法規要求標示 海灣合格評定標誌 (GCTS)。
• 生效日期：2026 年 1 月 1 日
• 強制實施日期：2026 年 4 月 30 日
• 已經在市場上產品過渡期結束：2027 年 4 月 30 日

The Oman Directorate General of Standardization and Metrology (DGSM) adopted on 30 October 2025 the technical requirements applicable to specific categories of personal electric mobility devices. The regulation covers the following products:
1.Electric scooters without a seat, including scooters with detachable seats
2.Self-balancing transport devices with or without a seat (e.g., hoverboards)
3.Electric mono-wheels with or without a seat
4.Electric skateboards
5.Accessories and components (such as batteries and chargers/adapters)
Importers are required to issue a Declaration of Conformity for each shipment.
Products must bear the Gulf Conformity Tracking Mark (GCTS) in accordance with the regulation before being placed on the market.
• Effective date: 1 January 2026
• Mandatory application: 30 April 2026
• Transitional period for products already in the market ends: 30 April 2027

家用電器 House Appliances

Saudi Arabia 沙烏地阿拉伯

沙烏地阿拉伯發佈SASO 2885:2025 (電動洗衣機能效和水效) 的新草稿版本

[法規草案] 沙烏地阿拉伯標準組織 (SASO) 就 SASO 2885:2025“電動洗衣機-能效和用水性能要求及標籤””向世界貿易組織 (WTO) 發佈了通知。
本通知涉及 沙烏地阿拉伯標準 SASO 2885 的新修訂草案，標題為“電動洗衣機——能效和用水性能要求及標籤”。該草案納入了根據此前已通知的 Rv1 版本標準收到的意見而作出的修訂。該標準規定了容量不超過 25 公斤的市電供電式洗衣機和洗烘一體機的最低能效要求 (MEPS)，以及測試、計算和標籤程序，包括嵌入式洗衣機、多桶洗衣機和洗烘一體機。該標準還涵蓋市電供電但也可由電池供電的電器。
最終意見徵集截止日期為 2026 年 5 月 12 日。

SASO issued WTO notification regarding SASO 2885:2025 – “”Electrical Clothes Washing Machines – Energy and Water Performance Requirements and Labelling
This notification concerns new draft revision of Saudi Standard SASO 2885, titled: “”Electrical Clothes Washing Machines – Energy and Water Performance Requirements and Labelling.””This draft incorporates revisions made in response to comments received on the previously notified Rv1. version of the standard.The standard specifies the Minimum Energy Performance Requirements (MEPS) as well as the testing, calculation, and labelling procedures for electric mains-operated washing machines and washer-dryers with capacities up to 25 kg, including built-in units, multi-drum washing machines, and washer-dryers. The scope also includes appliances that are mains-operated but can additionally be powered by batteries.
The final comment date is 12 May 2026.

能源效率要求 Energy Efficiency Requirements

EAEU 歐亞經濟聯盟

EAEU發佈能效法規TR EAEU 048/2019的更新草案公眾諮詢

[法規草案] 2026年3月5號，EAEU發佈了能效法規TR EAEU 048/2019的更新草案公眾諮詢：Draft Amendments No. 1 to the Technical regulation of the Eurasian Economic Commission «On Requirements to Energy Efficiency of Energy Consuming Devices»。評論日期截止2026年5月8號，批准及生效日期待定。

EAEU published draft amendments No. 1 to the Technical regulation of the Eurasian Economic Commission «On Requirements to Energy Efficiency of Energy Consuming Devices» (TR EAEU 048/2019.The final date for comments is 8 May 2026. Proposed date of adoption and proposed date of entry into force is to be determined at a later time.

Taiwan 台灣

臺灣發布《空氣壓縮機最低能效標準及能效等級標籤和檢驗要求》修訂草案

[法規草案] 經濟部標準檢驗局 (BSMI)預告修正「空氣壓縮機容許耗用能源基準與能源效率分級標示」相關規定。
-擴大管制範圍：出口壓力管制範圍調整
-基準調整：提高可變轉速迴轉式空壓機能效基準，並新增液冷式產品的計算公式 。
-行政優化：刪除光碟檢送方式，推行電子化申請，並加強主管機關抽樣檢測與見證測試的權限 。
-文字修正：明確規範對象為供國內使用者，並將「公司」修正為「廠商」以符合法規體例 。
根據公告內容，目前處於草案預告階段。對公告內容有意見者，請於公告刊登隔日起 60 日內 (即 2026 年 5 月中旬前) 陳述意見。

The Ministry of Economic Affairs announced draft amendments to energy efficiency standards for air compressors on March 11, 2026. Key updates include:
-Expanded Scope: Adjusting the discharge pressure range
-Enhanced Standards: Raising the Minimum Energy Performance Standards (MEPS) for variable-speed rotary compressors and introducing calculation formulas for liquid-cooled models.
-Administrative Changes: Discontinuing the use of CD-ROMs for report submissions in favor of digital processes, and granting authorities the power to perform sampling and witnessed testing before registration.
-Clarifications: Adding “”for domestic use”” to specify the regulated products and standardizing legal terminology (e.g., changing “”company”” to “”manufacturer””).

燈具 / LED Luminaiaries/LED

India 印度

印度發布《IS 16102 (Part 1):2026通用照明用自鎮流LED燈具》實施指南

印度發布了《IS 16102 (Part 1):2026通用照明用自鎮流LED燈具 – 第1部分安全要求》實施指南。自2026年8月3日起，新版標準IS 16102 (Part 1):2026將取代舊版標準IS 16102 (Part 1):2012。
在2026年8月2日的過渡期內，現有許可證/證書持有人和新的許可證/證書申請人應遵循該指南中的說明。

India publishes Guidelines for implementation of IS 16102 (Part 1):2026 Self-Ballasted LED Lamps for General Lighting Services – Part 1 Safety Requirements. Starting from Aug-3 of 2026, new version standard IS 16102 (Part 1):2026 will replace old version standard IS 16102 (Part 1):2012.
During transition period by Aug-2 of 2026, the existing licensees/certfication holders and new applicants for licence/certificate shall follow instructions in the guidelines.

其他 / 多主題產品 Others / Products with Multiple Subjects

EAEU 歐亞經濟聯盟

歐亞經濟聯盟公佈須遵守可追溯性機制的商品清單

歐亞經濟聯盟公佈了進口到歐亞經濟聯盟關卡的商品清單，這些商品須遵守可追溯性機制。歐亞經濟聯盟內部的可追溯性機制將於2026年9月1日全面生效。
新增的受監管商品清單包括:
-家用冰箱和冰櫃
-洗衣機
-顯示器、投影機和電視設備
-嬰兒推車和汽車安全座椅
-專用設備 (推土機、挖土機、裝載機)
其他強制性商品清單可在歐亞經濟聯盟海關總署 (Chestny ZNAK) 官方網站查詢。列入強制清單的商品必須符合可追溯性要求。

EAEU published list of goods imported into the customs territory of the Eurasian Economic Union subjects to traceability mechanism. The traceability mechanism within the EAEU will come into full operation on September 1, 2026.
The newly-added regulated list of products includes:
Household refrigerators and freezers.
Washing machines.
Monitors, projectors and TV equipment.
Baby strollers and car seats.
Special equipment (bulldozers, excavators, loaders)
Other products can be found in the Chestny ZNAK official website. Products fall into the mandatory list need to comply with the traceability requirement.

Ukraine 烏克蘭

烏克蘭發布命令以修訂機械技術法規標準清單

烏克蘭發布第2687/2026號命令，修訂機械技術法規標準清單。該令與歐盟委員會第2026/80號實施決定一致。

Ukraine publishes Order No.2687/2026 to amend standard list of Technical Regulation on Machinery. The Order is aligned with Commission Implementing Decision (EU) 2026/80

UK 英國

英國預計繼續對機械設備認可包括CE標誌在內的某些歐盟要求

自2021年1月1日起，英國繼續認可帶有CE標誌的機械設備以及帶有UKCA (英國合格評定) 標誌的機械設備，適用於投放英國市場的相關產品。這種做法使得企業在向英國市場投放產品時可以選擇使用其中一種產品標誌。英國政府正在引入《2026年機械供應 (安全) (修訂和過渡條款) 條例》(簡稱 “2026年英國條例”)，以繼續認可包括CE標誌在內的某些歐盟要求，從而使符合這些要求的機械設備能夠在滿足特定條件的情況下投放英國市場。這將反映歐盟機械指令的變更。透過該立法擴大CE認可範圍將適用於英國 (英格蘭、蘇格蘭和威爾斯)。

Since 1 January 2021, the UK has continued to recognise CE marked machinery equipment alongside the UKCA (UK Conformity Assessed) marked machinery, for relevant products placed on the GB market. This approach has enabled businesses to use either product marking when placing goods on the GB market. The UK Government (UKG) is introducing the Supply of Machinery (Safety) (Amendment and Transitional Provisions) Regulations 2026 (‘the GB Regulations 2026)’ to continue recognition of certain EU requirements including the CE marking so that machinery meeting these requirements can be placed on the Great Britain (GB) market, subject to certain conditions. This will reflect the changes to the EU machinery directive.The extension of CE recognition through this legislation will apply to Great Britain (England, Scotland, and Wales).

India 印度

印度公佈8項品質控制令的修訂

印度公佈了對8項品質控制令的修訂，其中規定，凡在「Udyam門戶網站」註冊的微型、小型和中型企業部可免於認證的條件。
– 火焰打火機 (品管) 令，2023年
– 飲用水瓶 (品質管制) 令，2024年
– 焊條和焊條 (品質控制) 令，2023年
– 家用保溫瓶、保溫壺和保溫容器 (品質控制) 令，2024年
– 電吊扇 (品管) 令，2023年
– 實驗室玻璃器皿 (品質管制) 令，2023年
– 空氣冷卻器和空氣過濾器 (品質控制) 令，2025年
– 傢俱 (品質控制) 令，2025年

India publishes amendments to 8 Quality Control Orders, it exempts certification for an enterprise, registered under Udyam Portal of the Ministry of Micro, Small and Medium Enterprises, wherein the investment in plant and machinery or equipment at original cost does not exceed rupees one crore and the turnover do not exceed rupees five crore for the previous financial year as certified by a Chartered Accountan.
– Flame-Producing Lighters (Quality Control) Order, 2023
– Potable Water Bottles (Quality Control) Order, 2024
– Welding Rods and Electrodes (Quality Control) Order, 2023
– Insulated Flask, Bottles and Containers for Domestic Use (Quality Control) Order, 2024
– Electric Ceiling Type Fans (Quality Control) Order, 2023
– Laboratory Glassware (Quality Control) Order, 2023
– Air Cooler and Air Filters (Quality Control) Order, 2025
– Furniture (Quality Control) Order, 2025

India 印度

印度 Meity 對高度專業化設備 (HSE) 定義且進口/製造量極低的產品發布指令

Meity於2026年3月12日 公告 ⟪Procedure for issuance of exemption for Highly Specialized Equipment (HSE) under the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021.⟫ ，適用於符合 高度專業化設備 (HSE) 定義且進口/製造量極低的產品 。
生效日期: 2026年6月15日 起正式實施 。
HSE 判定標準: 設備必須同時滿足「數量限制」與「技術指標」任一項:

申請要點:

提醒: 透過 ICEGATE 門戶網站使申請流程更加精簡，但也強化了品牌方在授權證明、檔齊備性及數量追蹤方面的嚴格責任 。
• 總量管制: 100 台的限額是計算該型號在全球所有產地進入印度的總和 。
• 轉制要求: 一旦該年度進口量達到 100 台，Meity 將停止核發豁免，後續必須取得正式的 BIS 註冊 。
• 清關連動: 豁免信將直接透過 ICEGATE 系統傳輸，海關將以此為憑放行 。

MeitY Circular dated 12.03.2026: “”Procedure for issuance of exemption for Highly Specialized Equipment (HSE) under the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021.”” This applies to products that meet the definition of Highly Specialized Equipment (HSE) and are imported or manufactured in very low volumes.
Effective Date: Effective from 15th June, 2026.
HSE Qualification Criteria: Equipment must satisfy both the “”Quantity Limit”” and any one of the “”Technical Requirements””:

Application Key Points:

Reminder: While the process is more streamlined through the ICEGATE portal, it also introduces stricter accountability for brands regarding authorization, documentation, and quantity tracking.
•Total Quantity Control: The quantity limit of 100 units is counted across the regulatory model number from all locations.
•Registration Requirement: Once the exemption quantity reaches 100, MeitY will cease issuing exemptions, and the manufacturer must obtain BIS Registration.
•Customs Integration: Exemption letters are issued through the ICEGATE portal, and Customs shall allow imports based on these letters.

Israel 以色列

以色列經濟部澄清雷射筆的合規需求

以色列經濟部進口管理局澄清，儘管雷射筆進口程式中對專業用途的1-2類雷射筆有所規定，但實際上並不需要工業標準協會 (SI) 對產品風險等級的認證，只需提供標籤和標記測試合格證書即可。

The Import Administration at the Ministry of Economy clarifies that despite what is stated in the Laser Pointer Import Procedure, regarding laser pointers in categories 1-2 for professional use, the Standards Institution of Industry’s approval for the risk level of the product is not required, but only a certificate of compliance with the labeling and marking tests.

Taiwan 台灣

臺灣發布修訂“強制檢驗項目參考商品分類代碼 (資料傳輸設備和玩具)

經濟部標準檢驗局 (BSMI) 公告修正應施檢驗商品之參考貨品分類號列，涉及「資料傳輸設備」(如路由器、交換器等，排除醫療器材及電信終端設備) 及「玩具」兩類產品。此次修正係配合經濟部國際貿易署調整進出口貨品號列，新增及刪除部分分類號列，並同步更新相關檢驗適用範圍。此變更屬於分類號列調整，並未改變原有檢驗義務，但將影響報驗及通關作業。

The Bureau of Standards, Metrology and Inspection (BSMI), under the Ministry of Economic Affairs (MOEA), has revised the reference commodity classification codes for mandatory inspection items, covering “data transmission equipment” (e.g., routers, switches, excluding medical devices and telecom terminal equipment) and “toys.” The revision aligns with updates made by the International Trade Administration, including the addition and removal of specific HS codes and corresponding import regulations. While the inspection scope remains unchanged, the update affects customs declaration and clearance procedures.

德國萊因TÜV認證 TÜV Rheinland Accreditation

Argentina 阿根廷

德國萊因TÜV阿根廷公司成為中美洲技術法規RTCA冰箱空調指定發證機構

德國萊因TÜV阿根廷公司正式獲得中美洲六國冰箱及空調產品技術法規RTCA的發證資格，意味著德國萊因TÜV可為出口至瓜地馬拉、宏都拉斯、尼加拉瓜、巴拿馬、薩爾瓦多、哥斯大黎加等中美洲國家的家電企業，提供當地語系化的一站式測試與認證服務。
關於中美洲技術法規 (RTCA)
“RTCA”全稱為 “Reglamentos Técnicos Centroamericanos” (中美洲技術法規)，是由中美洲國家 (哥斯大黎加、薩爾瓦多、瓜地馬拉、宏都拉斯、尼加拉瓜、巴拿馬) 共同制定的一系列技術法規。其核心目標在於統一區域標準、促進貿易便利化，並確保產品在品質、安全、消費者健康及環境保護方面符合要求。
本次德國萊因TÜV獲得的發證資格，主要針對以下特定產品能效要求的RTCA法規：
– RTCA 23.01.78:20 – 能效 – 電器產品：變頻分體式無風管式空調
– RTCA 23.01.80:21 – 能效 – 電器產品：定頻分體式無風管式空調
– RTCA 97.01.81:22 – 能效 – 電器產品：家用冰箱和冰櫃

TÜV Rheinland Argentina office has officially obtained certification qualification for refrigerators and air conditioners under the Technical Regulations of the Central American Countries (RTCA) in six Central American countries. This signifies that TÜV Rheinland can now provide localized, one-stop testing and certification services for home appliance manufacturers exporting to Central American countries such as Guatemala, Honduras, Nicaragua, Panama, El Salvador, and Costa Rica.
About the Central American Technical Regulations (RTCA): The RTCA, short for “”Reglamentos Técnicos Centroamericanos,”” is a series of technical regulations jointly developed by Central American countries (Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua, and Panama). Its core objectives are to unify regional standards, facilitate trade, and ensure that products meet requirements in terms of quality, safety, consumer health, and environmental protection.
The certification qualifications obtained by TÜV Rheinland this time primarily cover the following specific product energy efficiency requirements under the RTCA regulations:
– RTCA 23.01.78:20 – Energy Efficiency – Electrical Appliances: Inverter Split-Type Ductless Air Conditioners
– RTCA 23.01.80:21 – Energy Efficiency – Electrical Appliances: Fixed-Frequency Split-Type Ductless Air Conditioners
– RTCA 97.01.81:22 – Energy Efficiency – Electrical Appliances: Household Refrigerators and Freezers

資訊 / 電信 ITE / Telecom

Argentina 阿根廷

ENACOM正式將17.3–17.7 GHz頻段指定為固定衛星業務 (地空通訊) 頻段

阿根廷國家通訊局 (ENACOM) 已於 2025 年 10 月 23 日發布第 1261/2025 號決議，正式將 17.3–17.7 GHz 頻段以主要業務屬性分配給固定衛星服務 (由太空向地球)。
計畫使用該頻譜的製造商與營運商須向 ENACOM 登記並取得型式認證。

Ente Nacional de Comunicaciones (ENACOM) in Argentina published Resolución N° 1261/2025 on October 23, 2025. Officially assigns the 17.3-17.7 GHz band for the Fixed-Satellite Service (Space-to-Earth) on a primary basis.
Manufacturers and operators planning to use this spectrum need to register and get type approved from ENACOM.

Australia 澳洲

ACMA 正在考慮啟用自動頻率協調 (AFC) 系統來授權 6 GHz 頻段的標準功率 Wi-Fi

【草案公告】 ACMA正在考慮啟用自動頻率協調 (AFC) 系統，用於授權 6 GHz 頻段的標準功率 Wi-Fi 訊號，並探討如果啟用，該系統應如何實施。

Australia ACMA is considering enabling the use of Automatic Frequency Coordination (AFC) systems for authorising standard power Wi-Fi in the 6 GHz band and, if enabled, how it could be implemented.

Cambodia 柬埔寨

柬埔寨推出線上資訊搜索系統

2025年12月，柬埔寨技術審查委員會TRC正式上線了“經認證進口商與型式認證設備”資訊的線上查詢系統。
該系統的推出，使使用者、企業及其他相關方能夠更加便捷地在TRA官方網站查詢到各類電信設備的合規進口商資訊以及設備型式認證狀態，從而進一步確保電信設備的法規遵循與使用安全。
相關查詢連結如下：
1. 電信設備進口及分銷的合格代理商
https://www.trc.gov.kh/en/resources/qualified-import-agents/
2. 型式認證產品
https://www.trc.gov.kh/en/resources/type-approved-equipment/

In December 2025, the Technical Review Committee of Cambodia (TRC) officially launched an online system for searching information on “”certified importers and type-approved equipment””.
The launch of this system enables users, enterprises and other relevant parties to check the information of compliant importers and type approval status of various telecom equipment more conveniently on the official website of TRA, which further ensures the compliance and safety of telecom equipment.
Relevant links for inquiries are listed below:
1. Qualified agents for import and distribution of telecom equipment
https://www.trc.gov.kh/en/resources/qualified-import-agents/
2. Type Approved Products
https://www.trc.gov.kh/en/resources/type-approved-equipment/

Chile 智利

智利短距離設備二維碼要求更新

2025年11月24日，智利電信管理局 (SUBTEL) 發布第2219號決議，對第737號決議引入的短距離設備監管框架進行多項重要修訂。決議刪除了功率譜密度要求，保留了等效全向輻射功率要求，並在二維碼要求方面有如下更新:
– 鬆綁 QR 碼的張貼位置要求: 原則上應貼在設備外包裝，但若設備無包裝或不具備條件，也可直接貼在設備本體，或附於隨附紙質文件 (如說明書或保修卡)；
– 要求 QR 碼必須連結至一個西班牙語網頁，其內容須滿足規範中所列的資訊要求；
– 對於 2026 年 2 月 21 日前已提交並取得認證的設備提供過渡期安排：其 QR 碼網頁只需展示該認證文件即可，無需重新公開完整技術參數或測試資訊。
原有的型式認證流程仍僅適用於醫療用途的短距離設備，此次修訂未發生變化。

On November 24, 2025, the Chilean Telecommunications Authority (SUBTEL) issued Resolution 2219, which makes several important amendments to the regulatory framework for short-range devices introduced by Resolution 737. The resolution removes the power spectral density requirement, retains the equivalent omnidirectional radiated power requirement, and makes the following updates to the QR code requirement:
Relax the requirements for the posting location of QR codes: in principle, they should be affixed to the outer packaging of the equipment, but if the equipment is not packaged or does not meet the conditions, it can also be directly attached to the device itself, or attached to the accompanying paper documents (such as manual or warranty card);
The QR code must link to a web page in Spanish and its content must meet the information requirements listed in the specification;
A special transitional arrangement is made for devices that have been submitted and certified before February 21, 2026: the QR code webpage only needs to display the certification document, without the need to re-disclose the full technical specifications or test information.
The original type approval process still applies only to short-range equipment for medical use, and this requirement remains unchanged in this revision .

China 中國

國家認監委關於充電寶等產品強制性產品認證標誌試行措施事項的公告

國家認監委決定對充電寶等產品CCC標誌式樣和加施要求實施試點改革。
指定認證機構和獲證企業應在執行《強制性產品認證標誌管理要求》基礎上，在試點產品CCC標誌圖案的右側標注追溯二維碼，兩者緊鄰且不可分割，圖案應清晰、完整。追溯二維碼應符合《強制性產品認證證書管理要求》中認證證書二維碼規則或《標準規格CCC標誌追溯編碼規則》。
2026年3月1日起，試點產品領域新獲CCC認證證書的產品，應根據公告要求標注CCC追溯二維碼後，方可生產、銷售、進口或者在其他經營活動中使用。
2027年3月1日起，試點產品領域對應的全部獲證產品，應根據公告要求標注CCC追溯二維碼後，方可出廠、銷售、進口或者在其他經營活動中使用。
2027年3月1日前已按現行要求加施CCC標誌並出廠、銷售、進口或者在其他經營活動中使用的試點領域獲證產品，不做標誌變更要求。

CNCA announced to carry out the pilot reform of the pattern and implemention requirements of the CCC certification mark to the power bank and other products under CCC catelaogue.
Designated certification bodies and certified enterprises should be in the implementation of the “”Management Requirements for Compulsory Product Certification Marks”” on the basis of the right side of the pilot product CCC logo pattern labeled with a two-dimensional code of traceability, the two adjacent and inseparable, the pattern should be clear and complete. Traceability two-dimensional code should be consistent with the “”Management Requirements for Compulsory Product Certification Certificates”” in the certification certificate two-dimensional code rules or “”standard specifications CCC logo traceability coding rules””.
March 1, 2026 onwards, the pilot product area of the new CCC certificate of authentication of the product, should be marked according to the announcement requirements of the CCC traceability two-dimensional code before leaving the factory, sales, imports, or use in other business activities.
March 1, 2027 onwards, the pilot product areas corresponding to all certified products, should be marked according to the requirements of the announcement of the CCC traceability two-dimensional code before leaving the factory, sales, imports or use in other business activities.
March 1, 2027 has been in accordance with the current requirements of the CCC logo and factory, sales, import or use in other business activities in the pilot areas of certified products, do not do the logo change requirements.

India 印度

印度NCCS發佈最新電信安全標準 (ITSAR 2.0)

2025年12月1日， 印度國家通信安全中心(NCCS)發布針對Wi-Fi CPE和IP路由器的印度電信安全標準 (ITSAR) 2.0版本。
該新版本提供了更清晰設備涵蓋範圍:
Wi-Fi CPE: 現已明確適用於所有類型的AP、閘道及家庭路由器產品。任何具備路由、NAT或資料包過濾功能的Wi-Fi產品均被歸類為CPE。
雲端型 IP 路由器: 適用於所有包括SDN, 雲原生網路功能 (CNF), 虛擬網路功能 (VNF) 類型，以及所有部署模式的路由器。所有IPv4要求均也適用於IPv6。
針對Wi-Fi CPE和雲端型 IP 路由器的安全認證豁免期僅至2026年3月31日為止。

On December 1, 2025, India’s National Centre for Communication Security (NCCS) released version 2.0 of the Indian Telecom Security Standard (ITSAR) for Wi-Fi CPE and IP routers.
This new version provides clearer device coverage:
Wi-Fi CPE: Now explicitly applicable to all types of APs, gateways, and home router products. Any Wi-Fi product with routing, NAT, or packet filtering is classified as a CPE.
IP Routers: Available for all SDN, Cloud-Native Network Functions (CNF), Virtual Network Functions (VNF) types, and all deployment modes. All IPv4 requirements also apply to IPv6.
The security certification exemption period for Wi-Fi CPE and IP routers is only until March 31, 2026.

India 印度

印度擬定兩項電信產品基本要求 (ER) 標準草案

[法規草案] 印度擬定兩項電信產品基本要求 (ER) 標準草案:
– 修訂「區域網路交換器」基本要求 (ER) 標準 (意見徵集截止日期為2026年1月3日)
– 制定「IP終端」基本要求 (ER) (意見徵集截止日期為2026年1月3日)

India proposes 2 Draft Standards for Essential Requirements (ER) for Telecom products:
– Revision of standard for Essential Requirements (ER) of “”LAN Switch”” (receive comments till Jan-3 of 2026)
– Establish Essential Requirements (ER) of “”IP Terminal”” (receive comments till Jan-3 of 2026)

Indonesia 印尼

印尼發佈《2025年第469號通訊部條例》，該新法規主要闡述了DJID認證涵蓋的產品清單

印尼數字基礎設施總局於2025年11月7日發布新的法規《2025年第469號通訊部條例》(KEPMEN KOMDIGI NOMOR 469 TAHUN 2025)。該新法規主要闡述了DJID認證涵蓋的產品清單。這裡的「產品」可以定義為「電信產品」或「具有電信功能的非電信產品」。

On November 7th, 2025, Directorate General of Digital Infrastructure released a new regulation called “KEPMEN KOMDIGI NOMOR 469 TAHUN 2025”. This new regulation primarily talks about the list of products which are covered by DJID certifications. The word “Products” here can be defined as “telecommunication products” or “non-telecommunication products that have telecommunication features”.

Japan 日本

日本將引入HAPS (固定業務) 和HIBS (LTE/NR行動通訊業務) 的技術要求

[法規草案] 日本將修訂《無線電法實施條例》等相關條例，引入HAPS (固定業務) 和HIBS (LTE/NR行動通訊業務) 的技術要求，以確保即使在災害期間也能提供穩定不中斷的通訊服務，並涵蓋難以鋪設有線電視的廣大區域，例如山區。

Japan will amend the Ordinance for Enforcement of the Radio Act, etc. to introduce technical requirements for HAPS (fixed service) and HIBS (mobile telecommunication service for LTE/NR), to ensure a stable communication service that does not cease even during disasters and to cover wide areas where it is difficult to lay wired networks, such as mountainous regions

Japan 日本

日本將修訂《無線電設備管理條例》，將先進的固定無線存取 (FWA) 系統 (22GHz頻段) 納入其中。

[法規草案] 日本將修訂《無線電設備管理條例》，將先進的固定無線存取 (FWA) 系統 (22GHz頻段) 納入其中。
隨著5G時代的全面到來，預計未來網路流量將顯著成長。為了滿足預期成長的需求，26GHz和40GHz頻段將被分配給行動網路，這需要對目前使用這些頻段的現有無線電系統進行頻率遷移。由於固定無線存取 (FWA) 系統 (22GHz頻段) 的無線電臺數量與其他頻段相比較少，因此22GHz頻段成為現有無線電系統頻率遷移的候選頻段。由於22GHz頻段易受雨霧天氣影響，日本將制定必要的技術標準，以確保「先進」的FWA系統 (22GHz頻段) 在各種天氣條件下都能維持穩定的傳送速率。

Japan will amend the Regulation for Radio Equipment to add the advanced Fixed Wireless Access (FWA) system(22GHz band).
With the full-fledged arrival of the 5G era, a significant increase in traffic is expected in the future. In order to meet the anticipated increase in demand, the 26GHz and 40GHz bands will be allocated to mobile networks, necessitating the frequency migration of existing radio systems currently using these bands. As the number of radio stations for the Fixed Wireless Access (FWA) system (22GHz band) is small compared to other frequency bands, the 22GHz band is a candidate for the frequency migration of existing radio systems. Japan will establish technical standards necessary for the “”advanced”” FWA system (22GHz band) to maintain stable transmission speed regardless of weather conditions as the 22GHz band is susceptible to rain and fog.

Japan 日本

日本JC-STAR與英國PSTI簽署網路安全諒解備忘錄

2025年11月5日，日本經濟產業省與英國科學、創新和技術部就網路安全測試認證簽署了互認可協定 (MRA)。根據互認協定：

• 通過PSTI網路安全認證且提供了線上自我聲明的產品，在申請JC-STAR Level 1時，可視為已滿足JC-STAR Level 1的技術要求，將採用簡化程序；
• 已獲得通過JC-STAR Level 1評估並採用了認證標誌的產品，可認為符合PSTI的要求。

On November 5, 2025, Japan’s Ministry of Economy, Trade and Industry (METI) and the UK’s Department of Science, Innovation and Technology (DSEIT) signed a Mutual Recognition Agreement (MRA) for cybersecurity testing and certification.
According to the Mutual Recognition Agreement:

• Products that have been certified by PSTI for cybersecurity and have provided an online self-declaration are considered to have met the technical requirements of JC-STAR Level 1 when applying for JC-STAR Level 1, and a simplified procedure will be applied;
• Products that have been assessed as having passed JC-STAR Level 1 and have adopted the certification mark are considered to have met the PSTI requirements.

Mexico 墨西哥

墨西哥ATDT發佈通用網路安全政策

墨西哥數位和電信改革局 (ATDT) 於 2025 年 12 月 17 日發布《網路安全總政策》。該政策現已生效。該政策的目標是建立一個共同的網路安全綜合框架，以保障數位權利、保護政府資訊和基礎設施，並實現數位服務的彈性和連續性。ATDT 將在 2025 年 12 月 18 日起的 180 個日曆日內發佈技術指南、合規標準和正式格式，用於政策實施。自 2025 年 12 月 18 日起 60 個日曆日內，聯邦公共管理局各機構和實體還必須正式指定網路安全機構負責人，並任命其助理。

La Agencia de Transformación Digital y Telecomunicaciones (ATDT) in Mexico published the General Cybersecurity Policy on December 17, 2025. This Policy is now in effect. The goal of this policy is to establish a common comprehensive framework on Cybersecurity which will safeguard digital rights, protect government information and infrastructure, and allow for resilience and continuity of digital services. ATDT Will issue Technical Guidelines, compliance criteria, and official formats for policy implementation within 180 calendar days from December 18, 2025. Agencies and entities of Administración Pública Federal must also formally designate the Institutional Head of Cybersecurity and appoint their Assistant within 60 calendar days from December 18, 2025.

New Zealand 紐西蘭

24-30 GHz頻譜分配

[法規草案] 紐西蘭RSM發布一份技術討論文件，旨在更好地瞭解24-30 GHz頻段的當前和未來用途以及首選分配方案。

RSM has released a technical discussion document to better understand the current and future uses and preferred allocation approaches for the 24-30 GHz band.

New Zealand 紐西蘭

關於無線電電子對抗設備 (WECM) 的新公告

紐西蘭無線電頻譜管理部門已在《紐西蘭政府公報》上發布新的無線電電子對抗 (WECM) 禁令公告。新的 WECM 禁令公告正式取代並廢止了先前的無線電幹擾器禁令公告，後者已失效。
WECM 設備旨在阻斷或幹擾無線電、行動或 GPS 訊號，包括通常被稱為手機或 GPS 幹擾器的設備。這些設備會擾亂緊急通訊、危害公共安全並幹擾關鍵國家基礎設施。

Radio Spectrum Management has published a new Wireless Electronic Counter Measure (WECM) Prohibition Notice in the New Zealand Gazette.
New WECM notice formally replaces and supersedes the previous Radio Jammer Prohibition Notice, which is no longer in effect.
WECM devices are designed to block or interfere with radio, mobile, or GPS signals, including equipment commonly referred to as cell phone or GPS jammers. These devices can disrupt emergency communications, compromise public safety, and interfere with critical national infrastructure.
Under the Radiocommunications Regulations 2001, it remains illegal to manufacture, import, sell, supply, or use WECM equipment in New Zealand unless the individual or organisation is recognised as a permitted person.
The updated Gazette notice provides clearer and more current definitions of prohibited equipment to support industry understanding and compliance.

New Zealand 紐西蘭

無線電頻譜管理部門已就2300 MHz和2600 MHz頻段的未來使用和分配啟動公眾諮詢

[法規草案] 紐西蘭無線電頻譜管理部門已就2300 MHz和2600 MHz頻段的未來使用和分配啟動公眾諮詢。 2300-2395 MHz和2500-2690 MHz頻段的現有調頻管理權分別將於2030年和2028年到期。這些頻率目前用於行動蜂窩服務 (4G和5G) 和區域無線服務 (例如區域寬頻)。

Radio Spectrum Management has commenced public consultation on the future use and allocation of the 2300 MHz and 2600 MHz spectrum bands. Existing Management Rights for radio frequencies between 2300 – 2395 MHz and 2500 – 2690 MHz expire in 2030 and 2028 respectively. These frequencies are currently used for mobile cellular services (4G and 5G) and regional wireless services (such as regional broadband).

Nicaragua 尼加拉瓜

尼加拉瓜TELCOR在第215期政府公報中更新電信法規

2025年11月18日，尼加拉瓜電信管理局 (TELCOR) 在第215期政府公報中發布更新的電信設備監管條款。重要更新如下：
所有進入尼加拉瓜的產品均需獲得無異議證明 (NOC)，該證明通常與認證流程同時辦理；
豁免清單 (第9條): 根據《電信設備合格評定與認證》第二章第一節第9條，TELCOR後續將發布一份電信設備豁免認證的官方清單；豁免清單產品無需型式認證，但必須持有無異議證明；
強制性標籤 (第12條): 第12條 (已認證電信設備標籤) 規定了電信設備的強制性標籤。認證設備需貼上黑色標籤，二維碼和電子標籤將不被接受。標籤形式如下所示：

On November 18, 2025, the Nicaraguan Telecommunications Authority (TELCOR) published updated telecommunications equipment regulatory provisions in the Official Gazette No. 215. Important updates are as follows:
All products entering Nicaragua are required to obtain a No Objection Certificate (NOC), which is usually processed at the same time as the certification process;
Exemption list (Article 9): According to Article 9 of Chapter 2, Section 1 of the “”Conformity Assessment and Certification of Telecommunications Equipment””, TELCOR will publish an official list of exemption certification for telecommunications equipment in the future; Exempt list products do not require type approval, but must hold a certificate of no objection;
Mandatory labeling (Article 12): Article 12 (Labeling of certified telecommunications equipment) specifies mandatory labeling for telecommunications equipment. Certified devices are subject to black labels, and QR codes and electronic labels will not be accepted. The label format is as follows:

Philippines 菲律賓

菲律賓停止2G和3G行動網路服務

菲律賓決定停止2G和3G行動網路服務。

Philippines decide to decommission 2G and 3G mobile network services.

South Africa 南非

南非獨立通訊管理局 (ICASA) 就 2025 年國家調頻規劃第二稿徵求公眾意見

[法規草案] 南非獨立通訊管理局 (ICASA) 發布 2025 年國家調頻規劃 (NRFP) 第二稿，徵求公眾意見。此前，ICASA 已於 2025 年 4 月 4 日進行了第一輪磋商。
該規劃概述了南非將如何管理和分配調頻，以支援廣播、行動網路和衛星系統等通訊服務。

Pretoria – The Independent Communications Authority of South Africa (ICASA) has published the Second Draft National Radio Frequency Plan (NRFP) 2025 for public comment. This follows the first round of consultations that took place on 4 April 2025.
The plan outlines how radio frequencies will be managed and allocated in South Africa to support communication services such as broadcasting, mobile networks and satellite systems.

South Korea 韓國

關於修訂《電器安全標準》草案的行政通知 – KC 60335-2-29電池充電器

2025年12月23日國家技術標準院公告 第2025-370號- 電器產品安全基準第1類修訂案 行政預告公告
1. 修訂理由
為遵守國際電器產品安全管理協議（WTO/TBT, IECEE），更新國內安全標準以符合最新國際基準。

2. 主要內容
適用安全標準：
本次修訂之電器產品安全標準為：KC 60335-2-29 家用及類似用途電器之安全性 第2-29部：電池充電器的特殊要求。

3. 意見徵集方式
若任何機關、團體或個人對修訂案有意見，請於 2026年2月3日 前提交意見書至國家技術標準院電氣通信產品安全科。

Administrative Notice – Korea Agency for Technology and Standards (KATS)
Announcement No. 2025-370, dated December 23, 2025
Draft Amendment of Electrical Appliance Safety Standards (Type 1)

1. Reason for Amendment
To update domestic safety standards in accordance with international agreements on the safety management of electrical appliances (WTO/TBT, IECEE), and to align with the latest global standards.

2. Main Content
Applicable Safety Standard:
The electrical appliance safety standard subject to this amendment is:
KC 60335-2-29 – Safety of household and similar electrical appliances – Part 2-29: Particular requirements for battery chargers.

3. Submission of Comments
Any organization, association, or individual who has an opinion on this amendment is invited to submit written comments to the Electrical and Telecommunications Product Safety Division of the Korea Agency for Technology and Standards (KATS) by February 3, 2026.

South Korea 韓國

韓國發佈無線電相關設備技術標準修訂草案的檔

[法規草案] 韓國已向世貿組織通報了關於簡易無線電臺、太空站、地面站、無線電波探測及其他無線電設備技術標準修訂草案的檔。
1. 重新組織地面站的通用條件。 (引用國際標準或國際公認準則)
2. 規範在其他無線電臺或無線電設備的發射控制下，運作於固定衛星業務 (FSS) 頻段的地面站的無線電發射規則。 (引用國際標準或國際公認準則)
3. 規定了相關無線電設備合格評定的補充條款。

South Korea notified a WTO document about Draft Amendment of Technical Standards for Radio Equipment for Simple Radio Stations, Space Stations, Earth Stations, Radio Wave Detection and Other Radio Equipment.
1. Reorganizing common conditions of Earth Stations. (Citing international standards or internationally accepted criteria).
2. It regulates the regulations for radio emission of Earth Stations operating in the fixed satellite service (FSS) frequency band under the transmission control of other radio stations or radio equipment. (Citing international standards or internationally accepted criteria).
3. Supplementary provisions for application of conformity assessment for the relevant radio equipment are prescribed.

South Korea 韓國

韓國MSIT發佈強制USB Type-C 介面的通知 (第 2025-56 號)

2025 年 11 月 5 日，韓國科學技術資訊通信部發布第 2025-56 號通知，要求自 2026 年 11 月 5 日起，以下13類通過有線充電或同時通過有線充電及傳輸資料的設備必須配備 USB Type-C 介面：手機、平板電腦、數位相機、耳機、耳麥、可攜式遊戲機、可攜式揚聲器、電子書閱讀器、鍵盤、滑鼠、可攜式導航設備、耳塞及筆記型電腦。
通知的附件 1 規定了強制使用的 USB Type-C 介面的具體規格，僅規定了物理尺寸，其要求與IEC/EN 62680-1-3一致。

On November 5, 2025, the Ministry of Science and ICT issued Circular No. 2025-56, requiring that from November 5, 2026, the following 13 categories of devices that charge via wired or simultaneously charge and transfer data via wired charging must be equipped with a USB Type-C port: mobile phones, tablets, digital cameras, headphones, headsets, portable game consoles, portable speakers, e-book readers, keyboards, mice, portable navigation devices, earbuds, and laptops.
Annex 1 of the notice specifies the specific specifications for the mandatory use of the USB Type-C interface, specifying only the physical dimensions, and its requirements are consistent with IEC/EN 62680-1-3.

South Korea 韓國

韓國RRA發佈第 2025-9 號公告更新SAR測試標準

2025 年 12 月 5 日，韓國國家無線電研究機構 (RRA) 發佈第 2025-9 號公告，對《電磁波比吸收率 (SAR) 測量標準》進行修訂。公告將於 2026 年 4 月 1 日正式實施，現有按舊標準合規的設備可繼續視為合規。
修訂後的標準以國家標準 KS C 3350 為核心，取代原先分別適用與頭部及身體/四肢的 KS C 3370-1 和 KS C 3370-2，將 SAR 測量方法統一為基於 IEC/IEEE 62209-1528:2020 的綜合測量程序；同時明確該標準適用於《電磁波人體保護基準》第 4 條規定的 SAR 測量，並對引用標準化組織名稱和條文表述作出整理和規範。

On December 5, 2025, the National Radio Research Agency (RRA) of Korea issued Notice No. 2025-9 to revise the Specific Absorption Rate (SAR) Measurement Standard. The announcement will be officially implemented on April 1, 2026, and existing equipment that complies with the old standard can continue to be considered compliant.
The revised standard takes the national standard KS C 3350 as the core, replacing the original KS C 3370-1 and KS C 3370-2 for the head and body/limbs, respectively, and unifies the SAR measurement method into a comprehensive measurement procedure based on IEC/IEEE 62209-1528:2020. At the same time, it is clear that this standard is applicable to SAR measurement stipulated in Article 4 of the “”Electromagnetic Wave Human Protection Standard””, and the names and provisions of the quoted standardization organizations are re-aligned.

Thailand 泰國

NBTC 發佈關於無線麥克風和 DECT 的公告

NBTC 最新公告為無線麥克風和數位增強型無繩電話 (DECT) 制定新的技術標準。
1) NBTC TS 1006-2568 無線麥克風技術標準 (更新標準)
2) NBTC TS 1042-2568 使用數位增強型無繩通信 (DECT) 技術的數位無線電通信設備技術標準 (新標準)
3) 使用一般授權使用的頻率和無線電通信設備的標準 (更新公告)
國家廣播電視委員會公告日期：2025 年 11 月 13 日
皇家公報發布日期： 2025 年 12 月 4 日2025 年 12 月 4 日
生效日期：2025 年 12 月 5 日

The purpose of this email is to inform you latest announcement of NBTC in order to establish new technical standard for Wireless Microphone and Digital Enhanced Cordless Telecommunications (DECT)
1) NBTC TS 1006-2568 Technical standard for wireless microphone (updated standard)
2) NBTC TS 1042-2568 Technical standard for Digital Radiocommunication equipment using Digital Enhanced Cordless Telecommunications (DECT) technology (new standard)
3) Criteria of using frequency and radiocommunication equipment that are authorized to use in general (updated announcement)
Announcement date by NBTC: 13 November 2025
Announcement date on Royal Gazette: 4 December 2025
Effective date: 5 December 2025

Vietnam 越南

越南發佈《合格聲明及合格評定方法規範通知》 (草案)

[法規草案] 越南擬定《合格聲明及合格評定方法規範通知 (草案)》，該通知旨在規範符合性聲明及標準及技術法規的合格評定方法。該通知一旦獲得批准並實施，將取代現行的第28/2012/TT-BKHCN號通知。

Vietnam proposes draft Circular regulating the declaration of conformity and methods of assessing conformity with standards and technical regulations. Once it is confirmed and implemented, it will replace the current circular 28/2012/TT-BKHCN.
The draft circular is recieving public comments till Dec-27 of 2025 and expected to implement on Jan-1 of 2026.

Vietnam 越南

越南發佈《資料中心技術標準與法規實施細則》 (草案)

[法規草案] 越南擬發佈《資料中心技術標準與法規實施細則 (草案)》，該草案預計將於2026年2月1日生效，並取代第03/2013/TT-BTTTT號通知。
草案中適用的法規和標準如下：
1. 國家標準TCVN 9250:2021（或ANSI/TIA-942-B:2017），或Uptime Institute的Tier標準；
2. QCVN 32:2020/BTTTT，《電信站及電信週邊電纜網路防雷國家技術規範》；
3. QCVN 9:2016/BTTTT，《電信站接地國家技術規範》。

Vietnam proposes Draft Circular on Regulations on the application of technical standards and regulations for data centers. It recieves public comments till Nov-30 of 2025.
The draft circular is expected to implement on Feb-1 of 2026 and replace Circular 03/2013/TT-BTTTT.
The applicable regulations and standards in the draft circular as following:
1. National standard TCVN 9250:2021 (or ANSI/TIA-942-B:2017), or Tier standard of Uptime Institute;
2. QCVN 32:2020/BTTTT National technical regulation on lightning protection for telecommunication stations and telecommunication peripheral cable networks;
3. QCVN 9:2016/BTTTT National technical regulation on grounding for telecommunication stations

India 印度

印度能源效率局發布《2026年能源效率局 (電器標籤和合規性) 條例》

1. 基本資訊
• 生效日期：法規於 2026 年 1 月 1 日正式施行 。
• 核心目的：建立電器設備標籤顯示資訊、申請流程及合規監測的統一框架 。
2. 標籤核准與顯示規範
• 強制許可：受管制的設備型號在貼標前，必須先獲得能源效率局 (BEE) 的書面許可 。
• 許可效期：標籤使用許可的效期通常為 3 年 。
• 顯示內容：標籤須包含品牌、型號、能源參數、星級評價 (Star Level)、原產國及 BEE 標誌 。
• QR Code 要求：標籤旁必須附帶 QR Code 以供查詢，且須在實體店面及電子商務平台上清晰顯示 。
• 包裝規範：產品的包裝盒上也必須印製或黏貼對應的能源標籤 。
3. 合規驗證與違規罰則
• 核查測試 (Check Testing)：BEE 會從市場或工廠抽取樣本進行測試，驗證產品是否符合宣稱的能源性能 。
• 違規處置：若測試失敗，廠商必須：
o 在國家級報紙及社交媒體上發布違規資訊 。
o 從市場上**回收 (Withdraw)**所有庫存 。
o 修正現有及新產品標籤上的星級評價 。
• 罰則機制：嚴重違規者可能面臨保證金被沒收、暫停型號註冊或處以罰金 。

On December 26, 2025, Bureau of Energy Efficiency of India released the 《Bureau of Energy Efficiency (Appliance Labelling and Compliance) Regulations, 2026》
General Information
• Effective Date: The regulations will come into force on January 1, 2026.
• Objective: To establish a comprehensive framework for energy labeling, application procedures, and compliance monitoring for electrical appliances in India.
2. Labeling Requirements & Display
• Mandatory Permission: Manufacturers or importers must obtain written permission from the BEE before displaying energy labels on any appliance model.
• Validity: Permission to use a label is generally valid for a period of 3 years.
• Label Content: Labels must include the brand name, model year, energy performance parameters, Star Level, country of origin, and the BEE logo.
• QR Code Integration: A QR Code must be placed alongside the label to allow consumers to access product details. This must be visible at both physical retail points and on e-commerce platforms.
• Packaging: Energy labels must also be printed or affixed to the external product packaging.
3. Compliance & Enforcement
• Check Testing: The BEE will conduct random sampling from the market or manufacturing units to verify if the appliance meets the claimed energy performance.
• Non-Compliance Actions: If a product fails testing, the permittee is required to:
o Publish a notification of the failure in national newspapers and on social media/BEE website.
o Withdraw all non-compliant stocks from the market.
o Correct the Star Level on existing and new products.
• Penalties: Serious violations, such as the use of forged labels, may lead to legal action, forfeiture of security deposits, and suspension of model registration.

家用電器 House Appliances

Argentina 阿根廷

阿根廷計畫更新空調設備最低能源效率要求

阿根廷經濟部能源秘書處更新了空調設備的能源效率標準，提高了冷凍和暖氣模式的最低能源效率要求，以符合更新後的IRAM 62406:2019標準。

這些變更旨在提高能源效率，降低電力需求，防止電網超載，並鼓勵永續的能源消耗方式。
該決議自發佈之日起立即生效，並授權能源轉型與規劃副秘書處制定補充法規，以確保合規性。

The Ministry of Economy’s Secretariat of Energy has updated energy efficiency standards for air conditioning units, increasing the minimum requirements for both cooling and heating modes to align with the updated IRAM 62406:2019 standard.
These changes aim to promote energy efficiency, reduce electricity demand, prevent power grid overloads, and encourage sustainable energy consumption practices.
The resolution, effective immediately after publication, empowers the Subsecretariat of Energy Transition and Planning to issue complementary regulations to ensure compliance.

Chile 智利

智利發佈新的熱泵認證協議 PE N°1/44:2025

智利SEC針對熱泵產品發布新的認證協定： PE N°1/44:2025。該協定將於 2027 年 1 月 2 日起對智利製造商和進口商生效。自 2027 年 6 月 1 日起，所有在智利市場銷售的熱泵必須獲得符合SEC 認證協議 PE N°1/44:2025 的SEC證書。

SEC issued the new SEC Protocol PE N°1/44:2025 for Heat Pumps.
Entry in force for Chilean Manufacturer and Importers is Jan 02, 2027.
As from 01.06.2027 all Heat Pumps sold in Chile market must be already certified under SEC Protocol PE N°1/44:2025.

Serbia 塞爾維亞

塞爾維亞發佈兩項針對直銷製冷器具的能源效率法規

塞爾維亞發布兩項針對直銷製冷器具的能源效率法規：
– 生態設計法規（與歐盟法規 (EU) 2019/2024 一致），將於 2026 年 6 月 1 日實施。
– 能源標籤法規（與歐盟法規 (EU) 2019/2018 一致），將於 2025 年 11 月 23 日實施。

Serbia publishes 2 energy efficiency regulations for refrigerating appliances with a direct sales function:
– Ecodesign Regulation (Align with Regulation (EU) 2019/2024), implements on Jun-1 of 2026.
– Energy Label Regulation (Align with Regulation (EU) 2019/2018), implements on Nov-23 of 2025.

South Korea 韓國

韓國發佈關於《電器及消費品安全管理法》實施細則進行部分修正的行政通知

[法規草案] 韓國技術標準院 (KATS) 宣佈擬對《家用電器安全管理操作指南》進行修訂。
修訂內容包括：根據風險評估、行政措施/召回以及生產/使用環境，重新評估安全管理類別；將以下產品的安全認證等級改為安全確認等級：
– 電動吸塵器
– 電動洗衣機和旋轉式脫水機
– 微波爐（使用頻率在 300 MHz 至 30 GHz 之間）
– 電動乾衣機
– 電動馬桶

The Korean Agency for Technology and Standards (KATS) announced a proposed amendment to the Operational Guidelines for Safety Management of Electrical and Household Products.
Reassess safety management categories based on risk evaluation, administrative actions/recalls, and manufacturing/usage environments.
Reclassify certain products from safety certification to safety confirmation:
– Electric vacuum cleaners
– Electric washing machines and spin dryers
– Microwave ovens (using frequencies between 300 MHz and 30 GHz)
– Electric dryers
– Electric devices for toilets

Kuwait 科威特

科威特能效新法規

根據科威特工部最新頒佈的第19/2025號和第43/2025號法令，現採用以下新的能源效率技術法規：

自上述實施日期起，所有受上述技術法規約束的產品必須滿足新的先決條件，並在出口到科威特之前在PAI能源效率等級 (EER) 系統中註冊，並貼上科威特能源效率等級標籤。

Based on the latest MOCI Decrees numbers 19/2025 and 43/2025, the adoption of new energy efficiency technical regulations as follows:

Starting from the above implementation dates, all products under the scope of the above technical regulations must fulfill this new prerequisite requirement and get registered on PAI EER system and carry the Kuwaiti EER label before export into Kuwait.
PAI registration system is under development to cover these new categories; will keep you updated with the registration process once the system gets finalized.

China 中國

中國發佈電動自行車充電樁國家標準草案

[法規草案] 中國已向世貿組織通報了一份關於電動自行車充電樁國家標準草案的文件。
該草案規定電動自行車充電樁的術語定義、基本安全要求、安全保護功能要求和測試方法，並對直流充電樁提出了特殊要求。此檔適用於GB 17761中定義的電動自行車及其電池的交流/直流充電樁。

China notified WTO a document about draft National Standard for electric bicycle charging.
This document specifies the terminology definition, basic safety requirements, safety protection function requirements, and test methods for electric bicycle charging pile, and specifies the special requirements for DC charging pile. This document applies to AC/DC charging pile for electric bicycle and their batteries that defined in GB 17761.

China 中國

中國工信部就兩項GB標準發佈公開徵求意見稿

[法規草案] 中國工信部就兩項GB標準發佈公開徵求意見稿：
– 行動電源安全技術規範
– 電子電氣設備用鋰離子電芯和電池安全－第4部分: 玩具

China MIIT published open consultation for two GB standards-
– Safety technical specification for power bank
– Safety of lithium ion cells and batteries used in electronic and electrical equipment —Part 4: toys

燈具 / LED Luminaiaries/LED

Australia 澳洲

《2025年溫室氣體與能源最低標準 (LED燈具) 規定》將於2026年3月3日生效

澳洲《2025年溫室氣體與能源最低標準 (LED燈具) 規定》將於2026年3月3日生效。計畫自該日起銷售或供應進口的LED燈具，必須確保該型號已註冊。產品只需在註冊期間內註冊即可。可以存取能源評級註冊資料庫，搜尋已註冊的型號，以查看該產品是否已註冊，或是否需要註冊。

The Greenhouse and Energy Minimum Standards (LED Lamps) Determination 2025, commences on 3 March 2026. If you intend to offer LED lamps for sale or supply imported from this date, you must ensure the model is registered. A product only needs to be registered for a registration period. You can visit the Energy Rating Registration Database to search for registered models to see if the product already has a registration in place, or if it needs to be registered.

Mexico 墨西哥

墨西哥發佈採用G5、G13和Fa8燈頭的LED線性燈具標準草案

[法規草案] 墨西哥已向世貿組織通報一份標準草案檔，該草案適用於所有額定功率不超過125瓦、額定電壓不超過277伏的、用於一般照明用途的、採用G5、G13和Fa8燈頭的LED線性燈具，這些燈具進口到墨西哥境內，或在墨西哥合眾國境內製造或銷售。
該墨西哥官方標準草案檔規定了促進高效節能和LED線性燈具互換性要求的規格和測試方法。

Mexico notified WTO a document of draft standard applies to all LED linear lamps with G5, G13 and Fa8 caps, for general lighting purposes, with a rated power up to 125 W and a rated voltage up to 277 V, that are imported into, or manufactured or marketed within the territory of the United Mexican States.
The notified draft Official Mexican Standard sets out the specifications and test methods that promote efficient energy use and the interchangeability requirements for LED linear lamps. It applies to all LED linear lamps with G5, G13 and Fa8 caps, for general lighting purposes, with a rated power up to 125 W and a rated voltage up to 277 V, that are imported into, or manufactured or marketed within the territory of the United Mexican States.

其他 / 多主題產品 Others / Products with Multiple Subjects

Brazil 巴西

巴西ANATEL發佈第18086法令更新進口規則

2025 年 11 月 25 日，巴西國家電信管理局 (ANATEL) 發布第 18086號法令，更新了與合格評定相關的進口規則，法令將於 2026 年 5 月 25 日正式生效。
用於認證測試的產品樣品進口：根據新規則，進口商可以攜帶產品樣品進入巴西，但僅限於進行認證測試，且僅限測試所需的樣品數量，任何剩餘樣品將被保留，直至最終的合格證書頒發；樣品放行需要進口商 (或後續證書持有人) 與 ANATEL 指定的認證機構或授權測試實驗室之間簽訂正式的服務協定。協定必須明確規定產品型號、製造商以及待評估的確切數量；即使是通過郵政或快遞方式運輸的產品，也需接受ANATEL 和巴西聯邦稅務局的合規性核查；
已獲准商業化產品的進口：只有證書持有人或其法定代表人才能將已獲批准的電信產品進口到巴西。每件產品都必須按照相關標識程序貼上ANATEL的認證標誌；進口檔必須在“附加資訊”欄中填寫產品的證書編號，以確保順利通過海關和接受監管。

On November 25, 2025, Brazil’s National Telecommunications Authority (ANATEL) issued Ato. No. 18086, which updates the import rules related to conformity assessment, which will come into force on May 25, 2026.
Import of product samples for certification testing: According to the new rules, importers can bring product samples into Brazil, but only for the number of samples required for the test, and any remaining samples will be retained until the final certificate of conformity is issued; Sample release requires a formal service agreement between the importer (or subsequent certificate holder) and an ANATEL designated certification body or authorized testing laboratory. The agreement must clearly specify the product model, manufacturer, and the exact quantity to be evaluated; Even products transported by post or courier are subject to compliance checks by ANATEL and the Brazilian Federal Tax Agency.
Import of approved products for commercialization: Only the certificate holder or his legal representative can import approved telecommunications products into Brazil. Each product must be affixed with the ANATEL certification mark in accordance with the relevant marking procedures; Import documents must be filled with the product’s certificate number in the “”Additional Information”” column to ensure smooth customs clearance and supervision.

Brazil 巴西

巴西 Inmetro發布《人工智慧背景下的網路物理系統 (CPS) 安全指南》

12月9日，巴西國家計量、品質和技術研究院 (Inmetro)發布《人工智慧背景下的網路物理系統 (CPS) 安全指南》。這是根據第99/2025號法令成立的INMETRO人工智慧中心 (CIAI) 的首份技術檔。
該指南探討了在能源、醫療和基礎設施等關鍵系統中應用人工智慧所面臨的挑戰，重點指出目前缺乏開發、評估和認證方面的技術參考，並提出了網路分段和加密等緩解措施。

To promote the safe, reliable, and responsible application of artificial intelligence (AI) in Brazil’s social strategy, the Brazilian National Institute of Metrology, Quality and Technology (Inmetro) released the “”Guideline for the Security of Cyber-Physical Systems (CPS) in the Context of Artificial Intelligence”” last Tuesday (December 9). This guideline is the first technical document from the newly established Inmetro Center for Artificial Intelligence (CIAI), founded under Decree No. 99/2025.
The guideline explores the main challenges posed by the increasing prevalence of AI in critical systems such as energy, infrastructure, and healthcare, and points out the current lack of a technical framework to guide the development, evaluation, and certification of these technologies. Furthermore, the guideline integrates various mitigation techniques, combining traditional defenses such as network segmentation and cryptography with specific methods designed to counter AI attacks.
The document also explores how AI algorithms can enhance the effectiveness and stealth of cyber-physical system attacks. The recommendations in the guideline include a key roadmap for public and private sector managers and regulatory agencies, and identify unresolved challenges requiring further research.

China 中國

國家認監委發佈關於嚴格電動自行車強制性產品認證管理的公告

所有指定的電動自行車認證機構將於2025年12月1日註銷所有按照舊版標準頒發的有效CCC認證；所有按照舊版標準頒發的處於暫停狀態且無法恢復有效的CCC認證，也將於2025年12月1日被撤銷。所有電動自行車銷售企業自證書註銷或撤銷之日起不得繼續銷售。

All designated certification bodies for electric bicycles will cancel all valid CCC approvals issued in accordance with the old version standard on December 1, 2025; all CCC approvals issued in accordance with the old version standard, which are in a suspended state and cannot be restored to validity, will be revoked on December 1, 2025.All electric bicycle sales enterprises shall not continue to sell from the date of cancellation or revocation of their certificates.

China 中國

中國國家標準化管理委員會發布555項推薦性國家標準及1項電氣電子產品相關修訂標準（2025年第24號公告）

2025年10月5日，國家市場監督管理總局 (SAMR)下屬的國家標準化管理委員會 (SAC) 發布2025年第24號公告，批准了555項推薦性國家標準 (GB/T) 及1項修訂標準。這些標準涵蓋了電子電氣元件(光伏元件-No. 65~66; 插頭插座-No. 99~101; 電纜-No. 161~168; 輸配電-No.170; 半導體-No. 244; 電纜-No.277~279)、家用及類似 電器、風能發電系統、人工智慧(No. 369, 434~436，440)、機器人 (No. 286, 444, 455, 533) 等領域，具體實施日期詳見連結。

On Oct. 5, 2025, the National Standardization Administration (SAC) of the State Administration for Market Regulation (SAMR) issued Announcement No. 24 of 2025 to approve 555 recommended national standards (GB/T) and one amended standard, including electronics and electric components, household and similar electrical appliances(e.g. PV Modules – No. 6566; Plugs and Sockets – No. 99101; Cables – No. 161168; TDE- No. 170; Semiconductors – No. 244; Cables – No. 277279), wind energy generation systems, artificial intelligence (No. 369, 434~436，440), robots(No. 286, 444, 455, 533), etc., with different implementation dates.

Serbia 塞爾維亞

塞爾維亞發佈兩項生態設計法規

塞爾維亞發布兩項生態設計法規：
– 電腦與電腦伺服器生態設計要求法規 (與歐盟法規 (EU) No 617/2013 一致)，將於 2027 年 1 月 1 日實施。
– 電動馬達和變頻驅動器生態設計要求法規 (與歐盟法規 (EU) 2019/1781 一致)，將於 2027 年 1 月 1 日實施。

Serbia publishes 2 Ecodesign regulations:
– REGULATION on eco-design requirements for computers and computer servers (Align with Regulation (EU) No 617/2013), implements on Jan-1 of 2027.
– REGULATION on eco-design requirements for electric motors and variable speed drives (Align with Regulation (EU) 2019/1781), implements on Jan-1 of 2027.

Singapore 新加坡

提醒可攜式插座供應商，新增或更改內部元件構成修改，需重新認證

新加坡CPSO發佈通告，提醒可攜式插座供應商，註冊後添加壓敏電阻等內部元件構成技術修改，需重新認證。

CPSO issued a circular reminding RS supplying portable socket outlets that the addition of internal components such as varistors following registration constitutes a technical modification and requires re-certification.

South Korea 韓國

部分修訂《電磁波相容性標準》- 因應強化月台安全門 (PSD) 使用之雷射感測器 (或光達感測器) 對寬頻輻射的抗幹擾能力

2025年12月30日國立無線電研究院發布公告第2025-22號，依據《電波法》第47條之3及同法施行令第67條之2之規定，現對《電磁波相容性標準》(國立無線電研究院公告第2023-13號，2023年6月30日) 部分內容進行如下修訂並公告。
1. 修訂理由
因應第五代 (5G) 行動通訊的寬頻電波對月台安全門 (PSD) 感測器造成誤作動之情形，為保障國民安全，強化月台安全門使用之雷射感測器 (或光達感測器) 對寬頻輻射的抗幹擾能力，故部分修訂《電磁波相容性標準》。
2. 主要內容
甲. 在《多媒體設備之電磁波相容性標準》中，於機殼埠的抗幹擾標準中新增「寬頻輻射性RF電磁場」之抗幹擾標準（參照附表12第2號 甲目）。
乙. 公告之施行日期及相關其他公告之修訂內容（附則第1條與第2條）。 附則〈第2025-22號，2025年12月31日〉
第1條（施行日） 本公告自發布日起滿6個月後施行。
第2條（其他公告之修訂）
①《有關廣播通信設備等適合性評估之公告（國立無線電研究院公告）》中，第10條第1項第2號之丁目及【附表4】使用者指南中新增第3號條文，並將【附表1】適合性評估對象設備第11號 丁目第6款改為第7款，並重新修訂同目第6款內容。
②《有關廣播通信設備等測試機構指定與管理之公告（國立無線電研究院公告）》中，【附表1】指定領域別測試項目相關事項（第3條相關），於指定領域細分類測試項目中新增「342-3, 342-4」。

On 31th December 2025，Notice No. 2025-22 of the National Radio Research Agency
In accordance with Article 47-3 of the Radio Waves Act and Article 67-2 of the Enforcement Decree of the same Act, the “”Electromagnetic Compatibility Standards”” (Notice No. 2023-13 of the National Radio Research Agency, dated June 30, 2023) are partially amended as follows and hereby announced. Partial Amendment of the “”Electromagnetic Compatibility Standards””
1. Reason for Amendment
Due to malfunctions of Platform Screen Door (PSD) sensors caused by wideband 5G radio waves, and as a public safety measure, part of the standard is amended to ensure the wideband radiated immunity of laser sensors (or LiDAR sensors) used in PSD systems.
2. Main Contents
A. In the “”Electromagnetic Compatibility Standards for Multimedia Equipment””, add radiated immunity requirements for “wideband radiated RF electromagnetic fields” to the enclosure port immunity standards (Annex 12, Item 2, Sub-item A).
B. Implementation date of this notice and amendments to other related notices (Supplementary Provisions, Articles 1 and 2). Supplementary Provisions (No. 2025-22, December 31, 2025)
Article 1 (Effective Date)
This notice shall take effect six months from the date of issuance.
Article 2 (Amendment of Other Notices)
① In the “”Notice on Conformity Assessment of Broadcasting and Communication Equipment (NRRA Notice)””, new clauses are added to Sub-item D of Article 10 Paragraph 1 Item 2 and Item 3 in [Annex 4] User Instructions. In [Annex 1], Sub-item 6 of Item 11 Section D is renumbered as 7, and the revised Sub-item 6 is provided.
② In the “”Notice on Designation and Management of Testing Laboratories for Broadcasting and Communication Equipment (NRRA Notice)””, [Annex 1] regarding the test items by designated fields (related to Article 3) is revised to newly include test item codes “”342-3, 342-4″” under the detailed classification.

South Korea 韓國

韓國科學和資訊通信技術部發佈第2025-0970號通知

2025年11月12日，韓國科學和資訊通信技術部發佈第2025-0970號通知，發布了關於制定 “人工智慧發展和建立信任框架法 “實施令的立法通知。旨在支援人工智慧（AI）的健康發展，建立信任基礎，從而保護公民的權利和尊嚴，並提高公民生活品質，增強國家競爭力。

​On 12th November 2025，The Ministry of Science and ICT announced a legislative notice for the enactment of the Enforcement Decree of the “”Framework Act on the Advancement of Artificial Intelligence and the Establishment of Trust.””
– To support the sound development of artificial intelligence (​​AI) and establish a foundation of trust, thereby protecting the rights and dignity of citizens.
– To improve the quality of life for citizens and enhance national competitiveness.

Taiwan 台灣

臺灣BSMI發佈光伏逆變器和監控單元安全測試技術規範

2025年10月20日，臺灣標準檢驗局 (BSMI) 發布《太陽能光伏逆變器和監控單元安全測試技術規範》(檔編號：11440013080)。
該技術規範已刊登於《行政院公報》(第031卷，第197期)，並於2025年10月20日正式生效。

On Oct. 20, 2025, the Bureau of Standards, Metrology and Inspection (BSMI) of Taiwan published the Technical Specifications for Security Testing of Solar Photovoltaic Inverters and Monitoring Units (Document No. 11440013080).
The technical specification was published in the Executive Yuan Gazette (Volume 031, Issue 197) and took effect on Oct. 20, 2025.

Thailand 泰國

泰國NCSA發佈 AI 安全指南

2025年10月1日，泰國國家網路安全局 (NCSA) 發布《人工智慧安全指南：人工智慧安全使用指南》。該指南的核心是將安全整合到“人工智慧系統生命週期”框架中。

On Oct. 1, 2025, the National Cyber Security Agency (NCSA) released the AI Security Guidelines: Guidelines for the Secure Use of Artificial Intelligence. The core of the guidelines is to integrate security into the “Artificial Intelligence System Lifecycle” framework.

Thailand 泰國

泰國內政部根據《能源產業法》實施新的光伏屋頂規定

自2025年11月17日起，泰國內政部根據修訂後的《能源產業法》實施新的光伏屋頂安裝規定。 對容量不超過10 kW且不接入國家電網的屋頂光伏系統，免除 原有的許可證和審批要求，但須滿足每平方米載荷不超過20公斤等建築結構安 全條件。

On November 17, 2025, Thailand put into effect new solar-rooftop installation regulations under a revision of the Energy Industry Act, issued by the Ministry of Interior. Systems up to 10 kW that are not connected to the national grid are exempt from license and permit requirements, provided they meet structural‑safety conditions such as panel weight limits (no more than 20 kilograms) per square metre.

Vietnam 越南

越南財政部下屬的私營企業與集體經濟發展司最近發佈關於AI及其對越南中小企業雙重轉型影響的報告

2025年11月30日
越南財政部下屬的私營企業與集體經濟發展司最近發佈關於AI及其對越南中小企業雙重轉型影響的報告。該報告深入分析了越南企業，特別是中小企業的數位化和綠色轉型現狀，明確了越南企業的機遇與挑戰，並提出了適合其能力和資源的具體解決方案。
報告共分為五部分：
一：全球與越南雙重轉型背景；
二：人工智慧及其在雙重轉型中的應用概述；
三：人工智慧在越南中小企業雙重轉型中的應用；
四：私營企業與集體經濟發展司在支援越南中小企業雙重轉型方面的努力；
五：附錄。

November 30, 2025
The Department for Private Enterprise and Collective Economy Development under the Ministry of Finance of Vietnam recently released a report on AI and its impact on the dual transformation of Vietnamese SMEs. The report provides an in-depth analysis of the current status of digital and green transformation of Vietnamese enterprises, esp. SMEs, identifies opportunities and challenges of Vietnamese enterprises, and proposes specific solutions suitable to capacity and resources.
The report consists of 5 parts — Part 1: Global and Vietnamese dual transformation context; Part 2: Overview of AI and applications in dual transformation; Part 3: Application of artificial intelligence in dual transformation for Vietnamese SMEs; Part 4: Efforts of the Department for Private Enterprise and Collective Economy Development in supporting Vietnamese SMEs in dual transformation; and Part 5: Appendix.