【技術解析系列】汽車感測器核心技術全解讀

德國萊因TÜV與SENSOR CHINA聯合發佈的《2025車用感測器白皮書》,首次以「五大汽車域」為框架,系統梳理動力、底盤、車身、駕艙及自動駕駛域的感測器技術圖譜、市場競爭與合規路徑。白皮書深入解析全球多項核心法規與標準,涵蓋感測器技術標準、可靠性測試及功能安全要求等,為車企、供應商及開發者提供全球化技術合規解決方案。

技術專家解讀
核心感測器技術趨勢・法規標準・測試要求

德國萊因TÜV技術專家團隊依據白皮書內容,推出【車用感測器技術解析】系列專題,首期將深度解析電流/壓力/溫度/酒精檢測/車載雷射雷達等感測器技術,並聚焦相關標準與測試重點。

車用感測器技術解析|第一期:https://youtu.be/JBh8LcMmtHU

掃描圖中QR Code或點擊右方連結填寫表單,白皮書將於3個工作日記送至您的信箱👉https://jsj.top/f/p4jdy9

[限時邀請] 7/26 認證中古車講座陪你挑好車,小藍標活動同步開跑

在資訊不透明的中古車市場,買車靠的不只是眼光,更是資訊力。你可能是剛取得駕照、預算有限的首購族,也可能是需要一台安全穩定、全家都能安心乘坐的爸媽,甚至是尋求高 CP 值代步車的實用派買家,面對琳瑯滿目的中古車選項,誰都希望買到一台車況清楚、價格合理、不用再擔心後續維修的好車。 但不論是哪一類買家,心中都有一個共同的疑問:我怎麼知道這台車真的沒有問題?

 

德國萊因邀請你參加 7 月 26 日(六)在台北舉辦的實體講座,從專業的角度帶你了解什麼是 CPO 認證中古車,以及為什麼它是近年越來越多消費者選擇中古車時的重要依據。這場講座不銷售車輛,而是由專業技師分析 CPO 中古車檢測認證背後的運作原則,帶你看懂一台車是否值得買,應該怎麼判斷、該注意什麼,教你買車前你該知道的真相與判斷方式。

 

德國萊因新 CPO中古車檢測場地

 

德國萊因長期深耕產品與車輛檢測認證,在中古車領域推出的 CPO(Certified Pre-Owned)認證中古車檢測服務,是一套公正獨立的檢測流程,涵蓋超過 160 項細節項目,包含:是否事故修復、泡水痕跡、結構損壞、車身鈑件更換痕跡、實際里程與耗損程度項目等。透過專業技師實地檢查發出檢測報告,讓車況不再靠想像與信任,而是有據可查。  此CPO 中古車檢測服務的價值就是還給消費者一個清楚可信的資訊基礎。消費者可以不再只是「靠感覺」選車,而是有數據報告、有第三方驗證,可減少買到問題車的風險,更避免未來維修麻煩與安全疑慮。

 

如果你曾經因為不懂車,而在購車後陷入維修惡夢;或者你正在比價、詢問親友、看不出來哪一台車才是「沒問題的車」──那麼這堂講座,將會幫你建立一套清楚可靠的判斷邏輯。無論你現在正打算買車,或想未雨綢繆,都非常值得參加。講座報名倒數

 

除了實體講座外,我們也同步邀請消費者參加FB【小藍標活動】─ 從家電、隨身裝備、到生活小物,只要通過嚴格測試與品質把關,才有機會獲得德國萊因的小藍標 (檢測認證標誌)。 德國萊因邀請你快來FB官方粉絲團分享心中的好物標準。完成任務即有機會抽限量好禮。 Pick 小藍標活動

 

無論你是誰,當面對買車、選物這些重要決策,都有權利擁有透明資訊與專業認證當後盾。讓我們用一堂課的時間,把選擇變得更安心、更有依據。讓認證不只是買車,而是成為你生活中每一個安心選擇的依據。

 

📍活動詳情與報名:https://www.tuv.com/press/tw/press-releases/0726_cpoworkshop.html

📍小藍標活動入口:https://www.facebook.com/share/p/1Rs8fphDKZ/

 

德國萊因:從歐洲氫能煉鋼驗證推動台灣綠色鋼鐵轉型

在全球加速邁向淨零碳排的浪潮下,德國萊因積極發揮其在綠色製程領域的第三方驗證專業角色。傳統煉鋼業長期依賴焦炭做為還原劑,使其成為工業碳排放的主要來源之一,全球鋼鐵產業正積極推動以清潔氫氣取代焦炭的「綠鋼」脫碳技術。德國萊因近年參與德國兩項最具代表性的綠鋼旗艦計畫,分別為 thyssenkrupp Steel 主導的「tkH₂Steel」計畫以及 Stahl-Holding-Saar(SHS) 集團推動的「Power4Steel」計畫。

 

這兩項大型轉型工程均採用最先進的 Midrex 熱壓直接還原鐵(DRI)技術,搭配氫氣還原與電弧爐(EAF)製程,目標是逐步取代傳統高爐,以氫氣為核心能源打造脫碳煉鋼流程。兩案皆呈現以下三大關鍵共通點:

 

1. 相同技術體系:

– 採用 Midrex DRI + 氫氣還原 + 電弧爐的低碳製程組合
– SMS 集團統籌 EPC工程與技術整合
– 綠氫來源策略則透過區域能源業者或氫氣管網接入供應,並非自建電解設施

2. 相同政策架構:

– 均受德國聯邦經濟暨氣候保護部(BMWK)補助,且經過歐盟 CEEAG 審查通過
– 政策導向明確支持「碳邊界稅 CBAM」減免符合性與歐盟工業減碳目標

3. 相同第三方合規與驗證機構:

– 德國萊因擔任兩案的指定安全審查與合規驗證機構,涵蓋關鍵設備、設施設計與運轉風險評估

 

圖1. Thyssenkrupp Steel公司綠鋼的熱壓直接還原鐵(DRI)製程示意圖

 

在 tkH₂Steel 計畫中,thyssenkrupp 於德國杜伊斯堡基地推動集中型單廠運作,作為歐洲最大的煉鋼基地之一。該案獲得約 20 億歐元政府補助,預計2030年氫氣需求達 14.3 萬噸/年,初期鋼產能約 250 萬噸/年,可年減碳 350 萬公噸。

 

 圖2. tkH₂Steel 計畫的綠鋼工廠模型

 

Power4Steel 計畫則由 SHS 集團在薩爾州的 Dillingen 與 Völklingen 廠區推動分散型部署,獲得約 26 億歐元補助,是目前歐洲最大的綠鋼專案。初期以 70% 天然氣與 30% 氫氣混合還原,2030 年前將過渡至 100% 綠氫,年減碳效益達 480 萬公噸,預估碳排削減達 55%,為德國邁向 2045 氣候中和目標貢獻關鍵力量。

 

 圖3. 德國經濟事務和氣候行動部長Mr. Robert Habeck參訪 Power4Steel 計畫的綠鋼工廠模型

 

自2023年起德國萊因開始參與上述兩項計畫,進行計畫中的DRI設施與關鍵設備的安全合規性驗證與技術審查,包括Midrex DRI 設備 CE 審查意見、審查設計階段符合歐盟相關指令與法規及德國安全合規要求,以利向政府與補助機構提交設備安全與系統風險評估的合規性文件,深獲各界信賴及肯定。同時德國萊因整合來自德國與國際的專業團隊,依據歐盟機械指令、壓力設備指令、CE 標誌要求及德國法規要求進行全面性評估及審查。此次德國萊因專案團隊涵蓋多個服務部門,展現跨領域整合與高效專案管理能力,突顯德國萊因在國際大型去碳化工程中的專業角色。

 

德國萊因參與綠鋼計畫,不僅針對德國國家級安全要求提供專業顧問意見,也再次展現公司在「產品上市前合規性確認」與「氫能關鍵基礎設施審查」領域的深厚實力。德國萊因專案團隊主管 Stephen Spohr 先生與 Sebastian Braun 先生表示:「此次專案的成功不僅來自技術實力,也彰顯我們作為第三方驗證機構在協助鋼鐵產業落實永續目標上的關鍵價值。」。

 

放眼全球綠鋼供應鏈的發展,這些歐洲實務經驗為亞太市場,尤其是台灣,提供了寶貴的借鏡。台灣鋼鐵產業正面臨歐盟 CBAM 法規、生產碳足跡揭露、能源轉型與客戶減碳需求等多重挑戰,無論是建構氫還原製程、導入低碳技術,或執行碳盤查與再生材料追溯,皆可參考德國模式。

 

德國萊因工業服務及資訊安全事業群許鳳珠副總經理說,在台灣,德國萊因已與工研院合作,為其氫能煉鋼實驗場域提供風險與安全評估服務,並提供各行業 ISO 14067 碳足跡驗證、ISO 14064 溫室氣體盤查、綠色產品標章、CBAM 驗證等完整解決方案。未來德國萊因也將持續投入台灣氫能產業價值鏈的各個環節的氫安全、氫脫碳及氫經濟的氫谷驗證方案;對外協助台灣鋼鐵業者加速符合國際綠鋼供應鏈標準,實現綠色轉型與出口競爭力。

歐盟法規 (EU) 2025/718 – 修訂 PFOS 限量的持久性有機污染物法規

2025年6月27日,歐盟委員會發布了(EU)2025/718法規修訂了關於全氟辛烷磺酸(PFOS)及其衍生物限量的持久性有機污染物(POP)法規。


PFOS是歐盟首個受監管的全氟和多氟烷基化合物,其限值制定已久。

近期,用途與PFOS非常相似的一類物質,即PFOA、C9-C14 PFCA、PFHxS和PFHxA,被列入REACH附件XVII和POP附件I,但UTC限值遠低於PFOS。

這表明,從技術角度來看,降低這些化學物質的污染水平是可行的。

請細內容以及修訂前後版本如下表藍色部份供參考:

 

Parameters Regulation (EU) 2019/1021 Part A Regulation (EU) 2025/718
Substances 全氟辛烷磺酸及其衍生物(PFOS)C8F17SO2X

(X = OH,金屬鹽(O-M+),鹵化物,醯胺,以及包括聚合物在內的其他衍生物)。

全氟辛烷磺酸 (PFOS)、其鹽類及 PFOS 相關化合物 C8F17SO2X

(X = OH、金屬鹽 (O-M+)、鹵化物、醯胺及其他相關化合物,包括聚合物)

Limit Value PFOS在物質或混合物中濃度等於或低於10毫克/公斤(0.001重量百分比) PFOS 或其任何鹽類在物質、混合物或物品中的含量等於或低於 0.025 毫克/公斤(0.0000025 重量百分比);
PFOS濃度在半成品、物品或其部件中低於0.1重量百分比,或者,對於紡織品或其他塗層材料, PFOS含量低於1微克/平方公尺 所有 PFOS 相關化合物在物質、混合物或物品中的濃度總和等於或低於 1 毫克/公斤(0.0001 重量百分比);

 

Exemption 使用 PFOS 作為非裝飾性硬鉻 (VI) 電鍍的霧抑制劑。 刪除Point 4
Test method 應使用CEN 標準。任何其他使用者能夠證明具有同等性能的分析方法都可以作為 CEN 標準的替代方法。 刪除Point 5

 

本法規應具有完全約束力,並直接適用於所有成員國。

附件中限值變更將於2025年12月3日起生效。

 

法規原文:

(EU) 2019/1021

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:02019R1021-20241017

(EU) 2025/718

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L_202500718

 

德國萊因TUV Rheinland能為您做什麼?

德國萊因TUV Rheinland擁有專業化學檢測實驗室,能夠提供範圍廣泛的分析服務,如:#RoHS 、#REACH、#塑化劑、#食品接觸容器、#阻燃劑、#美國各州優先化學物質 (CHCC)、#PFAS,並能依您的需求提供優惠費用以及最具效益的方案評估。

 

若有檢測需求,歡迎與我們聯繫

聯絡人 Ms. Ada Tsao Ms. Kelly Lin
電話 (+886) 02-2172-1196 (+886) 02-2172-1249
Email adahy.tsao@tuv.com KellyYT.Lin@tuv.com

 

關於PFAS相關法規資訊,您可以從這裡了解更多:

歐洲化學品管理局提出全氟和多氟烷基物質PFAS的最新進展

https://www.tuvrblog.com/zh-tw/12346.html

歐盟PFAS提案動態 / TSCA 5項PBTs最終決定

https://www.tuvrblog.com/zh-tw/12316.html

美國 – 羅德島州修訂有關消費品中含有蓄意添加的PFAS的法律及通報要求

https://www.tuvrblog.com/zh-tw/11839.html

PFAS:EN 17681-1:2025 紡織品分析方法更新

https://www.tuvrblog.com/zh-tw/12964.html

 

關於POPs相關法規資訊,您可以從這裡了解更多:

歐盟針對POP法規中修改多溴聯苯醚 (PBDEs)及多氯聯苯 (PCB)限值展開為期四周的公眾意見諮詢

https://www.tuvrblog.com/zh-tw/12504.html

歐盟- 歐盟修訂POP法規中對於六溴環十二烷(HBCDD)的限制

https://www.tuvrblog.com/zh-tw/12023.html

歐盟 – 預計將甲氧氯(Methoxychlor)和UV-328及德克隆(Dechlorane Plus)列入POPs法規

https://www.tuvrblog.com/zh-tw/11894.html

2025年7月國際市場准入資訊更新

资讯 / 电信 ITE / Telecom

Algeria 阿爾及利亞

阿爾及利亞郵政和電子通訊監理局發佈免於認證要求的設備清單

2025年5月28日,阿爾及利亞郵政和電子通訊監管局 (ARPCE) 發佈了一份包含633項免於認證要求的設備清單。此清單涵蓋網路設備、防火牆、工業控制模組、伺服器、儲存解決方案和醫療設備。此清單可供市場營運商參考,以確定哪些設備不受ARPCE事先批准程式的約束。

On 28 May 2025, the Algerian Regulatory Authority of Post and Electronic Communications (ARPCE) published a list of 633 equipment items exempt from homologation requirements. The list includes networking devices, firewalls, industrial control modules, servers, storage solutions, and medical equipment. Manufacturers listed include Cisco, Huawei, Dell, Fortinet, HIKVISION, Siemens, Schneider Electric, Phoenix Contact, Esaote, and Person Medical. The exemption applies to specific models across various technical categories such as switches, access points, firewall appliances, industrial automation modules, and imaging devices. The published list serves as a reference for market operators to identify equipment not subject to ARPCE’s prior approval process.

Angola 安哥拉

安哥拉INACOM對新申請和續簽的申請程式發佈重要更新

安哥拉INACOM已對新申請和續簽的申請程式發佈了重要的更新,以保護類型核准制度的完整性和防止欺詐行為。更新包括以下項目:
– INACOM要求在提交續簽之前在其內部系統內進行強制性盡職檢查,以核實現有證書的真實性,立即生效。只有在這一點得到核實後,才能提交續展文件供INACOM核可。
– 當地代理商現在必須對申請人提交的新申請的所有檔進行盡職調查審查。申請在正式提交INACOM之前將接受檔是否符合規定的檢查。
– 預計在ANGOTIC 2025活動期間,處理和頒發新的批准可能會延遲。一旦事件結束,正常的處理活動將恢復。

Instituto Angolano das Comunicações (INACOM) has issued important updates to the application process for new applications and renewals in order to protect the Type Approval system’s integrity and prevent fraudulent practices. Updates include the following items:
•Effective immediately, INACOM requires a mandatory due diligence check to verify the authenticity of existing certificates within its internal system prior to submission for renewal. Only after this is verified may renewal documents be submitted for INACOM approval.
•Local agents are now required to perform a due diligence review of all documents submitted by the applicant for new applications. Applications will undergo a document compliance check prior to being officially submitted to INACOM.
•Delays may be expected during the ANGOTIC 2025 event for processing and issuing new approvals. Once the event has concluded, regular processing activities will resume.

Argentina 阿根廷

阿根廷發佈第 58/2025 號決議引入新的衛星管理和服務通用條例

2025年4月8日,創新、科學和技術秘書處在《官方公報》上發佈了第58/2025號決議,批准新的《衛星管理和服務通用條例》。批准該條例的目的是簡化、優化和提高與提供衛星設施和衛星服務相關的行政程式的透明度。

The Secretariat of Innovation, Science, and Technology published Resolution 58/2025 in the Official Gazette on April 8, 2025, approving the new General Regulations for Management and Satellite Services and repealing Resolutions 2325/1997 and 3609/1999 of the former Secretariat of Communications. The recitals of the Resolution state that the Regulation was approved to simplify, optimize, and provide transparency to the administrative procedures associated with the provision of satellite facilities and to the provision of satellite services.
The purpose of the Regulation is to regulate the provision of satellite facilities and satellite services of artificial satellites, both geostationary and non-geostationary orbit, to be provided in Argentina, and operating in the bands allocated to the Fixed Satellite Service (FSS), Mobile Satellite Service (MSS), and Broadcasting Satellite Service (BSS), in accordance with the provisions of the Radio Regulations of the International Telecommunication Union and the Table of Frequency Band Allocations of the Argentine Republic (CABFRA). Thus, the new Regulation replaces and unifies the regulations on this matter that the previous (and now repealed) resolutions included.

Brazil 巴西

Anatel 批准《調頻臨時使用條例》
巴西國家電信管理局 (Anatel) 批准了《調頻臨時使用條例》。
該條例旨在制定調頻臨時使用授權的規則和程式。

Brazil Anatel approves the Regulation for the Temporary Use of Radio Frequencies.

This Regulation is to establish the rules and procedures for authorization of temporary use of radio frequencies.

Burundi 布隆迪

布隆迪引入電信和無線電設備強制性型式認證制度

布隆迪政府頒佈了第580/01號部長令(2025年4月17日),要求所有電信和無線電設備在進口、銷售或使用前必須經過ARCT(Electronic Communications Regulatory and Control Authority)的強制性型式認證。該法規針對製造商、進口商、分銷商和運營商,旨在阻止不安全或假冒設備。獲得批准的設備必須符合國際標準,將在國家資料庫中註冊,賣家必須持有有效的ARCT證書。
新法規主要修訂內容如下:
1.申請批准證書的主體須先遞交有關公司詳細資訊的檔以獲得ARCT的授權許可;
2.進口標籤要求:經認證的設備在進口時必須加貼ARCT核准的專用標籤,且該標籤需經稅務局核驗確認。
備註:並未提及實際強制日期以及標籤樣式。

The Government of Burundi has enacted Ministerial Order No. 580/01 (April 17, 2025), requiring all telecom and radio devices to undergo mandatory type approval by ARCT before import, sale, or use. The regulation targets manufacturers, importers, distributors, and operators, aiming to block unsafe or counterfeit equipment. Approved devices must meet international standards, be registered in a national database, and sellers must hold a valid ARCT certificate.
The main revised contents of the new regulations are as follows:
1. Applicants for type approval must now be entities authorized by the ARCT.
2. Certified devices will bear a certification label adopted by the ARCT for importation and confirmed by the standards and revenue office.

India 印度

印度發佈2025年電信 (標準通知、合格評定和認證架構) 規則

印度發佈《2025年電信 (標準、合格評定和認證框架) 規則》。該規則根據《2023年電信法》頒佈,旨在建立一個清晰、透明、結構化的流程,用於制定技術標準並透過合格評定確保合規。該規則自《官方公報》公佈之日起正式生效。

In a significant move to modernize the regulatory framework for India’s rapidly evolving telecommunications sector, the Central Government has introduced the Telecommunications (Framework to Notify Standards, Conformity Assessment and Certification) Rules, 2025. Enacted under the Telecommunications Act, 2023, these rules aim to establish a clear, transparent, and structured process for setting technical standards and ensuring compliance through conformity assessment. They officially come into force on the date of publication in the Official Gazette.

Indonesia 印尼

印尼發佈自由空間光學設備全面新技術標準

印尼通信和數位部發佈了2025年第43號部長令,更新了自由空間光學 (FSO) 設備的技術標準,該標準於5月18日生效。該法令制定了嚴格的鐳射安全規則,將高風險雷射器限制在受控區域內,強制執行自動功率降低功能,並要求實現IEEE 802.3乙太網和ITU-T SDH互通性。設備必須通過電氣安全和電磁相容性測試。該法令旨在實現印尼數字基礎設施的現代化,取代2022年的規定,並確保更安全、更標準化的FSO部署。

Indonesia’s Ministry of Communication and Digital issued Ministerial Decree No. 43 of 2025, updating technical standards for Free Space Optics (FSO) equipment, effective May 18. It sets strict laser safety rules, limits high-risk lasers to controlled areas, mandates Automatic Power Reduction, and requires IEEE 802.3 Ethernet and ITU-T SDH interoperability. Equipment must pass electrical safety and EMC tests. The decree modernizes Indonesia’s digital infrastructure, replacing the 2022 rules and ensuring safer, standardized FSO deployment.

Indonesia 印尼

印尼計畫將CSIPR 35測試納入認證要求

[法規草案] 印尼數字基礎設施總局 (DJID,原名SDPPI Kominfo) 將於今年 (2025年) 正式要求在印尼提交認證的各種電信設備必須按照CISPR 35標準進行EMC抗擾度測試。
目前DJID正在就CISPR 35的實施時間及過渡期徵求意見。

In 2025, the Directorate General of Digital Infrastructure (DJID) — formerly known as SDPPI Kominfo — will officially require EMC immunity testing according to CISPR 35 standards for various telecommunication devices submitted for certification in Indonesia. This regulation is part of the government’s effort to harmonize national certification standards with international best practices and to ensure devices are resistant to electromagnetic interference (EMI) in real-world environments.

Indonesia 印尼

印尼KOMDIGI將在2026年在本地進行多數電信設備的測試

2025年6月4日,印尼通信與數位部(KOMDIGI)部發佈公告,宣佈計畫在2026年底前將大部分電信設備測試轉向國內進行。隨著印尼數位測試中心(IDTH)的成立,印尼已具備按照國際標準在國內開展測試的能力。

On June 4, 2025, the Ministry of Communications and Digital Affairs (KOMDIGI) of Indonesia issued an announcement announcing plans to move most of the telecom equipment testing to the country by the end of 2026. With the establishment of the Indonesian Digital Testing Center (IDTH), Indonesia has the capacity to conduct tests domestically in accordance with international standards.

Japan 日本

《無線電設備管理條例》和《特定無線電設備技術標準符合性認證條例》的部分修訂將於2025年5月19日生效
《無線電設備管理條例》和《特定無線電設備技術標準符合性認證條例》的部分修訂將於2025年5月19日生效。調頻廣播頻段上限將從95 MHz改為99 MHz。

Partial amendment of the Regulation for Radio Equipment and the Ordinance on Technical Standards Conformity Certification of Specified Radio Equipment will enter into force on 19 May,2025.
The upper limit of the frequency band for FM broadcasting will be changed from 95 MHz to 99 MHz.

Mexico 墨西哥

墨西哥IFETEL正式確認將IFT標誌的生效日期延至2027年7月1日
墨西哥聯邦電信協會(IFETEL)最近公佈了修改IFT標誌使用指南的生效日期和適用性的諮詢結果,從2025年7月1日修改為2027年7月1日。IFETEL於2025年6月16日正式發佈協議,正式確認生效日期為2027年7月1日。

The Instituto Federal de Telecomunicaciones (IFETEL) of Mexico recently published the results of a consultation to modify the effective date and applicability of the Guidelines for IFT Seal use from July 1, 2025, to July 1, 2027. IFETEL officially published an agreement on June 16, 2025, officially confirming the effective date as July 1, 2027.

Saudi Arabia 沙特阿拉伯

沙烏地阿拉伯
CST發佈文件包含用於節目製作和特別活動 (PMSE) 應用的頻率使用的監管規定和框架

[法規草案] 國家標準與技術委員會 (CST) 發佈文件,其中包含用於節目製作和特別活動 (PMSE) 應用的頻率使用的監管規定和框架,旨在:
– 加強用於節目製作和特別活動 (PMSE) 應用的頻譜的最佳利用
– 與國際上節目製作和特別活動頻譜的使用保持一致
– 透過清晰、透明、全面且面向未來的機制,無歧視地管理節目製作和特別活動的頻譜使用
– 提高沙烏地阿拉伯境內舉辦的節目製作和特別活動中使用的無線應用的品質

Based on the Communications and Information Technology Law issued by Royal Decree No. (M/106) and its Bylaw (the Bylaw); and based on the regulatory tasks assigned to the Communications, Space and Technology Commission (CST) under the CST’s Ordinance (the Ordinance), CST has issued this document, to include the regulatory provisions and frameworks governing the use of frequencies for Program Making and Special Events (PMSE) applications, in order to:
-Enhancing the optimal use of the spectrum utilized for Program Making and Special Events (PMSE) applications.
-Aligning with international uses of spectrum for Program Making and Special Events.
-Managing spectrum use for Program Making and Special Events through a clear, transparent, and comprehensive mechanism that looks to the future without discrimination.
-Improving the quality of wireless applications used in Program Making and Special Events held in the kingdom.

South Korea 韓國

韓國RRA發佈EMC標準更新公告,涉及多個EMC標準
2025年6月5日,韓國國家無線電研究機構(RRA)發佈了編號為2025-41的關於部分修訂EMC測試方法的公告。公告中涉及多個EMC標準的版本更新,重點包括:
– 無線通訊產品通用EMC標準:KS X 3124:2020(ETSI EN 301 489-1:2017)更新為KS X 3124:2024(ETSI EN 301 489-1:2019)
– 寬頻無線通訊產品EMC標準:KS X 3126:2020(ETSI EN 301 489-17:2009)更新為KS X 3126:2024(ETSI EN 301 489-17:2020)
– DECT產品EMC標準:KS X 3128:2014(ETSI EN 301 489-6 V.1.3.1)更新為KS X 3128:2024(ETSI EN 301 489-6:V2.2.1)

On June 5, 2025, the National Radio Research Agency (RRA) of South Korea issued an announcement numbered 2025-41 regarding the partial revision of the EMC test method. The announcement involves version updates to several EMC standards, with highlights including:
– General EMC standard for wireless communication products: KS X 3124:2020 (ETSI EN 301 489-1:2017) updated to KS X 3124:2024 (ETSI EN 301 489-1:2019);
– EMC standard for broadband wireless communication products: KS X 3126:2020 (ETSI EN 301 489-17:2009) updated to KS X 3126:2024 (ETSI EN 301 489-17:2020);
– DECT product EMC standard: KS X 3128:2014 (ETSI EN 301 489-6 V.1.3.1) updated to KS X 3128:2024 (ETSI EN 301 489-6:V2.2.1).

Thailand 泰國

泰國NBTC宣佈終止 2G 和 3G 設備型式核准及進口
NBTC 已宣佈將於 2025 年 6 月 9 日終止 2G 和 3G 設備型式核准及進口。此舉將影響所有僅搭載 2G 或 3G 設備的新產品。
此公告的生效日期為 2025 年 6 月 30 日。
摘要:
1. NBTC 將僅在 2025 年 6 月 30 日之前為 2G 和 3G 設備頒發型式核准證書(即 B 類證書)。此日期之後,將不再為 2G 和 3G 設備頒發型式核准憑證。
2. NBTC 將僅允許進口 2G 和 3G 設備,有效期至 2025 年 6 月 30 日。
3. NBTC 將於 2025 年 6 月 30 日起停止授權 2G 和 3G 設備進行自貼標和購買標籤。
補充說明:
– 對於同時使用 2G/3G 和其他蜂窩技術(例如 4G/5G)的設備,NBTC 仍將照常簽發型式認可證書。
– 先前已在泰國市場或泰國用戶處獲得認證的 2G/3G 設備仍可在市場上銷售/使用。本公告僅適用於新型號或生效日期後進口的產品。

NBTC has announced a notification to terminate type approval and importation for 2G and 3G only equipment on 9th June 2025.
This will affect all new product that have only 2G or 3G Equipment
Effective Date of this announcement is 30th June 2025.
Summary:
1. NBTC will issue type approval certificate (i.e. class B) for 2G and 3G only equipment only up to 30 June 2025. After this date, type approval certificate will not be issued for 2G and 3G only equipment anymore.
2. NBTC will allow importation of 2G and 3G only equipment only up to 30 June 2025.
3. NBTC will stop authorization for self labeling and label purchase for 2G and 3G only equipment on 30 June 2025.
Additional note:
– In case of equipment with 2G/3G together with other cellular technology e.g. 4G/5G, NBTC will still continue to issue type approval certificate as usual.
– Previously certified 2G/3G only equipment in Thai market or at Thai users can still be sold/used in market. The announcement is only effective to new model or products to be imported after effective date.

Ukraine 烏克蘭

烏克蘭發佈新的《電磁相容性計算方法》
烏克蘭發佈了《電磁相容性計算方法》,以確認其符合在烏克蘭使用的無線電通訊業務中使用的無線電設備、某些無線電技術的無線電電子裝置的規定條件。

The Ministry of Digital Transformation of Ukraine has approved an updated methodology for calculating electromagnetic compatibility, which should ensure the smooth operation of various devices, from smartphones to airfield radars.
This solution is designed to make communications less susceptible to interference and maintain the stability of mobile networks and the Internet. According to the new rules, before introducing new radio equipment, it is necessary to check its impact on existing systems. This will help avoid disruptions in the operation of key technologies used in various industries.
Although the changes may be imperceptible in everyday life, they should ensure more reliable operation of radio networks and improve the quality of communication services in Ukraine.

家用電器 House Appliances

Australia 澳洲

澳洲正在就提高商用制冰機用水效率的監管影響分析草案進行諮詢
[法規草案] 澳洲當局正在就提高商用制冰機用水效率的方案徵求建議。正在考慮的方案包括非監管和監管兩種方式。支持此次諮詢的監管影響分析確定了一系列政策方案及其成本和效益。

Australian auhtority is seeking suggestions and feedback on options to improve the water efficiency of commercial ice makers. Options being considered include both non-regulatory and regulatory approaches. The Regulatory Impact Analysis supporting this consultation identifies a range of policy options and the associated costs and benefits.
This consultation is being conducted with knowledge of the recent regulation of commercial ice makers for Minimum Energy Performance Standards (MEPS) under the Greenhouse and Energy Minimum Standards Act 2012. The implementation of MEPS will enable the voluntary declaration of commercial ice maker potable water use and condenser water use (in the case of water-cooled ice makers). Any potential regulation of commercial ice makers in relation to water efficiency (e.g. mandatory water efficiency disclosure or minimum water efficiency standards) would occur under the WELS Act.

Australia 澳洲

澳洲為洗碗機引入最低用水效率要求
澳洲發佈水效註冊WELS相關要求更新,其中包括為洗碗機引入最低用水效率要求。

Australia has released updates to its Water Efficiency Regulator (WELS) requirements, including the introduction of minimum water efficiency requirements for dishwashers.

Brazil 巴西

Inmetro 提議修訂空調合格評定要求
[法規草案] Inmetro 發起諮詢建議,提議修訂 2021 年空調合格評定規則。
這些修改旨在提高能源效率標準的合規性,更新測試協議,並確保與國家節能政策保持一致。

The consultation launched by INMETRO (National Institute of Metrology, Quality, and Technology) proposes amendments to the 2021 rules governing conformity assessment for air conditioners.
The changes are aimed at improving compliance with energy efficiency standards, updating testing protocols, and ensuring alignment with the National Energy Conservation Policy.

Brazil 巴西

Inmetro 提議修訂臺式、壁式、落地式和空氣迴圈扇的符合性評估要求
[法規草案] Inmetro 於 2025 年 5 月 8 日發佈了第 16 號公眾諮詢意見,提出修訂 2021 年 7 月 9 日第 299 號 Inmetro 條例的提案,該條例批准了臺式、壁式、落地式和空氣迴圈扇的符合性評估要求。

National  Institute of  Metrology,  Quality and  Technology  – Inmetro,  issued  Public Consultation No. 16, 8 May 2025, a proposal  to amend Inmetro Ordinance No. 299, of 9 July 2021, which approves the Conformity Assessment Requirements for Table, Wall, Pedestal and Air Circulator Fans.

China 中国

中國發佈《家用和類似用途吸油煙機及交流換氣扇能效限定值及能效等級》國家標準草案
[法規草案] 2025年6月18日,中國向世貿組織通報了《家用和類似用途吸油煙機及交流換氣扇能效限定值及能效等級》國家標準草案。
該標準規定了家用及類似用途吸油煙機、交流電換氣扇 (以下簡稱「換氣扇」)以及具有換氣功能的多功能器具的能源效率限定值、能源效率等級、試驗方法和檢驗規則。
本標準適用於安裝在家用烹調爐具、爐灶或類似用途的器具上部,額定電壓不超過250V的外排式吸
油煙機,以及單相額定電壓不大於250V,額定換氣輸入功率不大於500W,葉輪直徑不大於500mm,由電動機驅動的換氣扇以及帶換氣功能的多功能器具。

On 18 June 2025, China notified WTO about the draft National Standards of the minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and A.C.electric ventilating fans.
This document specifies the energy efficiency limits, energy efficiency grades, test methods, and inspection rules for range hoods for household and similar purposes, AC ventilating fans (hereinafter referred to as “”ventilating fans””), and multi-functional appliances with ventilating functions.
This document applies to external exhaust range hoods installed on top of household cooking stoves, cookers, or similar appliances with a rated voltage not exceeding 250V, as well as ventilating fans driven by electric motors and multi-functional appliances with ventilating functions that meet the following conditions: single-phase rated voltage not exceeding 250V, rated ventilating input power not exceeding 500W, impeller diameter not exceeding 500mm.

Côte d’Ivoire 象牙海岸

象牙海岸正式啟動全國能源標籤宣傳活動

在先前的更新中,能源總局發佈了致空調、冰櫃和電燈分銷商和經銷商的通知: 分銷商和經銷商應在2025年7月15日截止日期前聯繫能源總局,進行能源分類程序。在此截止日期之後,未持有監管能源標籤的經銷商和經銷商將受到處罰。
近期,象牙海岸政府於2025年5月5日至6月5日啟動一項能源標籤宣傳活動,旨在讓所有公民、消費者和家電行業的專業人士瞭解並動員他們關注能源標籤的基準。同時,能源標籤範例已發佈在傳單中。

In the previous update, Directorate-General for Energy publishes Notice to Distributor and Dealer of Air-Con, Fridge-Freezer and Electric Lamp:
The distributor and dealer shall contact Directorate-General for Energy to proceed energy classification procedure by Deadline Jul-15 of 2025.
After this deadline, there will be sanction to distributor and dealer who does not have regulatory energy label.
Recently the government is launching a energy labelling campaign from May-5 to June-5 of 2025, aims to inform and mobilize all citizens, buyers and professionals in the household appliance sector around benchmark of energy label. Meanwhile, the energy label examples are publishes in flyers:
– Air-Con: https://www.dgenergie.ci/article-detail/53/249/plus-d-etoiles-moins-de-consommation-pour-les-climatiseurs
– Fridge-Freezer: https://www.dgenergie.ci/article-detail/53/250/plus-d-etoiles-moins-de-consommation-pour-vos-refrigerateurs-et-congelateurs
– Electric lamp: https://www.dgenergie.ci/article-detail/53/248/nouvelle-etiquette-energetique-pour-vos-lampes-led

Israel 以色列

以色列提出對強制性標準 SI 900 第 2.5 部分 (涉及洗碗機) 的修訂
[法規草案] 以色列提出強制性標準 SI 900 第 2.5 部分(涉及洗碗機)的首次修訂提案。該修正草案刪除了希伯來文部分詳細說明的標準國家偏差中的以下內容:
– 刪除第 2 部分詳述的一項規範性引用檔;
– 刪除第 7 部分 (標記和說明) 的國家偏差,包括其第 7.201 至 7.205 節、圖 201 及其所有註腳;
– 刪除第 10 部分 (輸入功率和電流) 的國家偏差;
– 刪除國家偏差中關於能耗、耗水量、洗滌品質和烘乾品質的第 204 部分
– 調整製造商聲明;
– 刪除國家偏差中包含的涉及待機功耗的第 205 部分

Israel proposed first amendment to the Mandatory Standard, SI 900 part 2.5, dealing with dishwashers. This draft amendment deletes the following from the standard’s national deviations detailed in the Hebrew section:
-Deletes one of the normative references detailed in Section 2 ;
-Deletes the national deviations to Section 7 – Marking and instructions, including its sub-sections 7.201 to 7.205, Figure 201 and all its footnotes;
-Deletes the national deviations to Section 10 – Power input and current;
-Deletes Section 204 included in the national deviations dealing with energy consumption, water consumption, washing quality and drying quality – adjustment to the manufacturer’s declaration;
-Deletes Section 205 included in the national deviations dealing with power consumption in standby mode

Mauritius 模裡西斯

2025年9月1號模裡西斯將強制空調能效
模裡西斯《2025年能源效率(最低能源性能標準)條例》已於2025年3月1日生效。該條例規定了六個月的暫停期,允許進口商和製造商調整其產品線和物流。暫停期將於2025年8月31日結束。這意味著2025年9月1號模裡西斯將強制空調能效。
其他能效管制產品已列在《2017年能源效率(最低能源性能標準)條例》裡,包括家用電動洗碗機、家用電烤箱、家用製冷器具、電子顯示幕、家用滾筒式烘乾機 、家用洗烘一體機等。

Mauritius’ Energy Efficiency (Minimum Energy Performance Standards) Regulations 2025 came into effect on March 1, 2025. The regulations provide for a six-month suspension period to allow importers and manufacturers to adjust their product lines and logistics. The suspension period will end on August 31, 2025. This means that Mauritius will enforce air conditioning energy efficiency on September 1, 2025.
Other energy efficiency regulated products are listed in the Energy Efficiency (Minimum Energy Performance Standards) Regulations 2017, including household electric dishwashers, household electric ovens, household refrigeration appliances, electronic display screens, household tumble dryers, household washer-dryers, etc.

Mexico 墨西哥

墨西哥發佈空調的能源效率官方標準NOM-011-ENER-2024
墨西哥發佈官方標準NOM-011-ENER-2024:中央空調、整體式空調和分離式空調的能源效率,限值、測試方法和標籤。

Mexicao published Official Standard NOM-011-ENER-2024: Energy efficiency of central, package and split-type air-conditioners. Limits, test methods and labelling.

Moldova 摩爾多瓦

摩爾多瓦正在簡化已獲得歐盟CE標誌認證的產品的市場准入程序
[法規草案] 摩爾多瓦共和國正在簡化已獲得歐盟CE標誌系統認證的產品的市場准入程序,這是邁向加入歐盟的重要一步。 2025年6月18日,摩爾多瓦政府批准了第235/2011號《認證與合格評定活動法》修正案草案,旨在承認歐盟公告機構所進行的合格評定。該提案目前正在等待議會批准。

In a significant step toward EU integration, the Republic of Moldova is streamlining access to its market for products already certified under the European Union’s CE marking system. On June 18, 2025, the Moldovan government approved a draft amendment to Law No. 235/2011 on Accreditation and Conformity Assessment Activities, aiming to recognize conformity assessments carried out by EU Notified Bodies. The proposal is now pending parliamentary approval.

Saudi Arabia 沙烏地阿拉伯

SASO 更新大型空調和家用空調能源效率標準,將於

2026 年 12 月 1 日生效SASO 已更新大型空調和家用空調能源效率標準。兩項標準將於 2026 年 12 月 1 日生效。
– SASO 2663: 2025
– SASO 2874: 2025

– SASO 2663: 2025
– SASO 2874: 2025

SASO has updated the standards related to EER of Large ACs & Household ACs. The implementation date of both standards will be Dec 1st 2026 .
– SASO 2663 : 2025
– SASO 2874 : 2025

Taiwan 台灣

經濟部能源署修正「空氣清淨機容許耗用能源基準與能源效率分級標示事項、方法及檢查方式」及「電鍋容許耗用能源基準與能源效率分級標示事項、方法及檢查方式」,自即日生效
本公告為配合「經濟部能源局」改制為「能源署」,修正空氣清淨機與電鍋之能源效率分級標示圖,並更新機關名稱與徽章。新增條文規定,已核准產品之舊版標示圖自公告日起一年內有效。同時調整能源效率抽測與複測規定,明訂不符者處理方式與資訊公開原則。公告自即日生效。

This announcement updates the energy efficiency labeling regulations for air purifiers and electric cookers in response to the reorganization of the Bureau of Energy into the Energy Administration. The labeling graphics have been revised to reflect the new agency name and emblem. A new provision allows previously approved products to use the old labeling for up to one year from the effective date. Rules for sampling and re-testing of energy efficiency have also been updated, including handling of non-compliance and information disclosure requirements. The announcement takes effect immediately.

Taiwan 台灣

經濟部能源署修正「電冰箱容許耗用能源基準與能源效率分級標示事項、方法及檢查方式」,自2027年1月1日生效
為因應技術進步及全球節能減碳趨勢,本公告修正電冰箱能源效率分級標準,提升等級區別性,並引導業者開發高效能產品。修正內容將自2027年1月1日起正式生效。
主要修正內容包括:調整能源因數值(E.F.) 之計算方式與基準、更新能源效率分級表、明確申請分級標示所需文件與作業流程、規範能源標示圖張貼位置,以及更新抽測與複測的執行與處理規定。

In response to technological advancements and global trends in energy conservation and carbon reduction, this announcement revises the energy efficiency grading standards for refrigerators to enhance differentiation and encourage the development of high-efficiency products. The revised regulations will take effect on January 1, 2027.
Key updates include: adjustments to the calculation and benchmarks of the Energy Factor (E.F.), an updated efficiency grading table, clarified application procedures and required documents for system registration, placement requirements for the energy efficiency label, and revised rules for product sampling and re-testing.

 

燈具 / LED Luminaiaries/LED

Australia 澳洲

燈具註冊要求的變更
在澳洲銷售的發光二極體 (LED) 燈、白熾燈、螢光燈鎮流器、變壓器以及用於超低壓 (ELV) 鹵素燈的電動降壓轉換器的監管方式有所變化。
– LED 燈供應商必須在 2026 年 3 月 3 日之前滿足《2025 年溫室氣體和能源最低標準(LED 燈)決議》的要求。
– 白熾燈供應商必須自 2025 年 10 月 4 日起符合《2024 年溫室氣體和能源最低標準(普通照明服務用白熾燈)決議》的要求。
自 2024 年 10 月 4 日起,以下產品不再受澳洲設備能源效率計畫的監管:
1) 螢光燈鎮流器
2) ELV 鹵素燈的變壓器和電動降壓轉換器

There are changes to how light emitting diode (LED) lamps, incandescent lamps, ballasts for fluorescent lamps, transformers and electric step-down converters for extra low voltage (ELV) halogen lamps are regulated for sale in Australia.
– LED lamps suppliers must meet requirements under the Greenhouse and Energy Minimum Standards (LED Lamps) Determination 2025 by 3 March 2026.
– Incandescent lamps suppliers must meet requirements under Greenhouse and Energy Minimum Standards (Incandescent Lamps for General Lighting Services) Determination 2024from 4 October 2025.
From 4 October 2024, the following products were no longer regulated under the Equipment Energy Efficiency Program within Australia:
1) ballast for fluorescent lamps
2) transformers and electric step-down converters for ELV halogen lamps.

Australia 澳洲

澳洲標準協會和紐西蘭標準協會發佈AS/NZS CISPR 15:2025標準,規定多種照明設備的射頻騷擾發射 (輻射和傳導) 要求
2025年4月17日,澳洲標準協會和紐西蘭標準協會發佈了AS/NZS CISPR 15:2025標準。該標準規定了照明設備、多功能設備照明部件、紫外線和紅外線輻射設備、廣告標識、裝飾照明和緊急標誌的射頻騷擾發射 (輻射和傳導) 要求。

On April 17, 2025, Standards Australia and Standards New Zealand published standard AS/NZS CISPR 15:2025. This standard specifies requirements for the emission (radiated and conducted) of radiofrequency disturbances from lighting equipment, the lighting part of multi-function equipment, UV and IR radiation equipment, advertising signs, decorative lighting and emergency signs.

Brazil 巴西

Inmetro提案禁止生產、進口和銷售某些特定種類的燈具
[法規草案] Inmetro 於 2025 年 5 月 7 日發佈了第 14 號公眾諮詢報告,提案禁止生產、進口和銷售底座內置鎮流器的緊湊型螢光燈、管狀螢光燈電磁鎮流器以及直線型、環形和緊湊型管狀螢光燈交流鎮流器。
National  Institute  of  Metrology,  Quality  and  Technology  –  Inmetro,  issued  Public Consultation No. 14, 7 May 2025, a proposal to prohibit the manufacture, import, and sale of compact fluorescent lamps with ballast integrated into the base, electromagnetic ballasts for tubular fluorescent lamps, and electronic ballasts powered by alternating current for rectilinear, circular, and compact tubular fluorescent lamps, whose Conformity Assessment Requirements and Technical Regulations were approved by Inmetro Ordinances No. 17, of January 14, 2022,  No. 500, of December 20, 2021, and No. 78, of February 4, 2021 – Consolidated, respectively.

Morocco 摩洛哥

摩洛哥標準化協會 (IMANOR) 批准摩洛哥新標準 NM 14.2.303:燈具和照明設備的能源標籤要求
2025年3月20日,摩洛哥標準化協會 (IMANOR) 發佈第433-25號決定,批准摩洛哥新標準,其中包括NM 14.2.303:2025:電氣產品和家用電器能源標籤-燈具和照明設備的能源標籤要求。該決定已發佈於《摩洛哥官方公報》第7388期。

On March 20, 2025, the Moroccan Institute of Standardization (IMANOR) issued Decision No. 433-25 approving new Moroccan Standards, including NM 14.2.303:2025 for energy labeling of electrical products and household appliances – requirements for lamps and luminaires. This decision was published in the 7388th issue of the Moroccan Official Gazette.

Vietnam 越南

越南提出新的QCVN 19:2025/BKHCN技術法規草案,規範LED照明產品的安全和電磁相容性 (EMC)
[法規草案] 越南提出新的QCVN 19:2025/BKHCN技術法規草案,該法規旨在規範LED照明產品的安全和電磁相容性 (EMC)。該草案旨在取代現行的LED法規QCVN 19:2019/BKHCN。
QCVN 19:2025/BKHCN目前處於草案階段,預計將於2027年6月1日正式實施。

Vietnam proposes new draft QCVN 19:2025/BKHCN technical regulation on safety and electromagnetic compatibility (EMC) of LED lighting products.
It aims to replace current LED regulation QCVN 19:2019/BKHCN.
QCVN 19:2025/BKHCN is in draft status, however, the Vietnam expects it implements on Jun-1 of 2027.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

Australia 澳洲

新南威爾士州發佈有關電動自行車和電動微型交通工具的最新要求
2025年5月23日,新南威爾士州政府公報發佈了有關電動自行車和電動微型交通工具的最新要求。
該公報宣佈取消大部分機械要求,將顯著改變監管格局。

A recent update was published in the NSW Government Gazette on 23 May 2025, relating to E-Bikes and E-Micromobility devices.
The gazette announces the removal of most mechanical requirements, significantly changing the regulatory landscape.

Japan 日本

日本電安法別表12將於2025年8月底更新,涉及多個常用標準
日本電安法別表12的正式修訂計畫於2025年(令和7年)8月底進行。
2025年8月31日及以後,將不再簽發基於現有標準的證書,寬限期結束後,必須適用新版本/標準, 涉及多個常用標準, 如J61347-2-13、J60598-2-4、J60335-2-79 等。

Official revision of Appendix 12 is scheduled for the end of August, 2025 (Reiwa 7).
Certificates based on the existing standards cannot be issued on or after August 31, 2025, and it will be necessary to apply the newer editions/standards after termination of the grace period.

Mexico 墨西哥

墨西哥發佈清水電動泵元件和電動泵的能源效率官方標準NOM-004-ENER-2025
墨西哥發佈官方標準NOM-004-ENER-2025:額定功率為0.149 kW(1/5 HP)至1.492 kW(2 HP)的清水電動泵組件和電動泵的能源效率,限值、測試方法和標籤。

Mexico published Official Standard NOM-004-ENER-2025: Energy efficiency for clean water motor pump assemblies and motor pumps with a power rating of 0.149 kW (1/5 HP) to 1.492 kW (2 HP). Limits, test methods and labelling.

China 中國

中國發佈民用無人機登記和啟動要求標準草案
[法規草案] 中國發佈民用無人機登記和啟動要求標準草案。
本檔規定了民用無人機登記和啟動的一般流程、技術要求和測試方法,適用於在中國大陸地區銷售和使用的民用無人機的登記和啟動實施,不適用於自供電飛行玩具和模型飛機。

WTO published a notification regarding the draft standard of registration and activation requirements for civil unmanned aircraft of China.
This document specifies the general process, technical requirements, and testing methods for the registration and activation of civil unmanned aircraft. This document applies to the implementation of registration and activation for civil drones sold and used in Chinese mainland.This document does not apply to self-powered flying toys and model aircraft.

China 中國

公開徵求對《工業洗滌機械通用安全要求》以及《家用燃氣快速熱水器》強制性國家標準的意見
[法規草案] 工業和資訊化部公開徵求對《工業洗滌機械通用安全要求》以及《家用燃氣快速熱水器》等2項強制性國家標準的意見。

China published notification on updating/drafting 2 GB standards:
– GB standard for Washing Machine for Industrial use
– GB 6932 for Water Heater

China 中國

中國發佈《安全防範系統視訊監控系統數位錄影設備》國家標準草案
[法規草案] 2025年6月18日,中國向世貿組織通報了《安全防範系統視訊監控系統數位錄影設備》(HS編碼)國家標準草案。
本文件規定了視訊監控和安全防範系統用數位錄影設備的技術要求,描述了測試方法,並建立了檢驗規則。本檔適用於視訊監控和安全防範系統以數位錄影設備的設計、製造和檢驗。

On 18 June 2025, China notified WTO the draft of National Standard of Digital video record equipment of video surveillance system in security and protection systems (HS code(s).
This document specifies the technical requirements for digital video recording equipment used in video surveillance and security systems, describes the test methods, and establishes the inspection rules.This document applies to the design, manufacturing and inspection of digital video recording equipment for video surveillance and security purposes.

India 印度

印度 BIS X 方案延長 2024 年《電氣設備(品質控制)第二修正案》的實施時間
印度工業標準局 (BIS) 於 2023 年 5 月 9 日公佈了低壓開關櫃認證流程,該流程屬於 X 方案。 X 方案取代了原先於 2020 年 11 月 11 日公佈的 II 方案,旨在提高安全性並符合印度標準,尤其是 IS 60947 系列。
印度重工業部已將以下產品類別的實施日期從 2025 年 5 月 10 日延長至 2025 年 11 月 10 日。
其他已公佈的產品類別將遵循 2024 年《電氣設備(品質控制)第二修正案》中規定的實施日期。

The certification process of Low-voltage switchgear which is under Scheme X , notified on 9th May,2023 by BIS. Scheme X, which replaced the earlier Scheme II which originally notified on 11th November, 2020, aims to enhance safety and compliance with Indian standards, particularly the IS 60947 series.
The Ministry of Heavy Industries has extended the date of implementation for the following product categories from May 10th , 2025 to November 10th, 2025.
The other product categories notified will follow the date of implementation as mentioned in the Electrical Equipment (Quality Control) Second Amendment Order, 2024.

India 印度

DPIIT發佈《2025年商用自動販賣和販賣用電器 (品質控制) 令》,將於2025年10月1日起實施
2025年5月20日,DPIIT發佈《2025年商用自動販賣和販賣用電器 (品質控制) 令》,取代了2024版。該命令將於2025年10月1日起實施,延長自原定的2025年4月1日的日期。
豁免條款 :
• 出口貨物 – 專門為出口而在印度生產的產品不在本命令範疇內。
• 研發豁免 – 商用自動販賣和販賣用電器的製造商每年可進口最多50個單位作為研究和開發用途,前提是這些貨物不進行商業銷售,並將其作為廢料處理,同時需保持年度記錄,並在政府當局要求時提交。

On May 20, 2025, DPIIT released the《Electrical Appliances for Commercial Dispensing and Vending (Quality Control) Order, 2025》in supersession of the 2024 version. Now, it set to be implemented from 1st October 2025—extended from its original date of 1st April 2025.
Exemptions :
• Export Goods – Products manufactured in India exclusively for export are exempt from the scope of this Order.
• R&D Exemption – Manufacturers of electric appliances for commercial dispensing and vending are allowed to import up to 50 units per year for research and development purposes, provided these goods are not sold commercially, are disposed of as scrap, and year-wise records are maintained and submitted to government authorities upon request.

India 印度

BEE正式啟動「蒸發式空氣冷卻器」星級標籤計畫,於 2025 年 7 月 1 日生效
印度能源效率局 (BEE) 已根據其自願計畫附表 40 正式啟動「蒸發式空氣冷卻器」星級標籤計畫,該計畫於 2025 年 7 月 1 日生效。
自 2025 年 6 月 1 日起,製造商和貿易商可透過 BEE 星級標籤入口網站申請。

BEE has officially launched the Star Labelling Program for “Evaporative Air Coolers” under its Voluntary Scheme-schedule 40, effective on 1st July 2025.
With over 10 million units sold annually, evaporative coolers are a staple in India’s residential and commercial cooling market. As energy demand soars, so does the need for smarter solutions.
Starting 1st June 2025, manufacturers and traders can apply through the BEE Star Label Portal.

India 印度

重工業部發佈並延長機械與電氣設備安全 (綜合技術法規) 修正案的執行期限,至2026年9月1日
重工業部已決定延長2024年機械與電氣設備安全 (綜合技術法規) 修正案的執行期限,並發佈了新法規,命名為《機械與電氣設備安全(綜合技術法規)修正案2025》。
現將實施日期定為2026年9月1日。

Ministry of Heavy Industries has decided to grant an extension to the OTR. 2024 and have released the new order naming as “”《Machinery and Electrical Equipment Safety (Omnibus Technical Regulation) Amendment Order, 2025》.
Now the date of implementation is 1st September 2026.

India 印度

印度工業與安全局 (BIS) 發佈《IS 16333 (第3部分) 第1號修正案實施指南:2022》
在2025年5月30日,BIS發佈《IS 16333 (第3部分) 第1號修正案實施指南:2022》。該修訂的重大變更是:每部手機必須提供一本使用手冊,可以是印刷形式或數位模式(線上使用指南和/或QR碼),以提供除IS 16333(第1部分)第5.1條所述資訊外的其他資訊。包裝上必須提供以數位模式訪問該資訊的條款。

On May 30, 2025, BIS issued the《Guideline for Implementation of Amendment No.1 to IS 16333 (Part 3): 2022》. The significant changes in the amendment are “”Each mobile phone handset shall have an instruction manual either in a printed form or in digital mode (online user guide and/or QR code) to furnish the following information in addition to the information given in 5.1 of IS 16333 (Part 1). The provision to access the information in digital mode shall be given on the packaging.
The standard without Amendment No. 1 will remain in force until 19 September 2025.
All registered manufacturers and applicants are requested to inform BIS changes incorporated in the mode of the instruction manual, if any.

Ukraine 烏克蘭

烏克蘭提交新的《機械技術法規》草案

[法規草案] 烏克蘭提交了新的《機械技術法規》草案。新法規基於歐盟第2023/1230號法規制定。
現行《機械技術法規》是基於歐盟第2006/42/EC號指令制定。
新法規一旦獲得批准並實施,將取代現行法規。

Ukraine proposes New draft Technical Regulation on Machinery. New Regulation is developed based on Regulation (EU) 2023/1230.
Current Regulation on Machinery is developed based on Directive 2006/42/EC.
Once new regulation is approved and implemented, it will replace current regulation.

德國萊因 CPO 中古車檢測台北服務站搬遷啟用 設備與服務全面升級

 

為持續提供更安全、專業、便捷的驗車體驗,德國萊因 CPO 中古車檢測台北服務站自 2025 年 7 月 1 日起正式從濱江街舊址遷移至新北市三重區,並同步完成全新設備導入與服務空間升級,打造煥然一新的檢驗環境。

 

德國萊因 CPO 中古車檢測台北服務站

新地址: 新北市三重區中正北路315巷6弄96號
聯絡電話: 02 2172 1231
服務時間: 9:00 – 18:00

 

新場地三大重點特色:

 

檢驗設備全面升級

台北服務站新增高階頂高機,可支援多種車型檢測,包含電動車與 9 人座休旅車等大型車型, 可有效提升檢測流程效率與準確度,讓每一次驗車都安心。

 

客休空間更寬敞

客休區及檢驗作業區全面升級,座位數與舒適度同步提升,消費者驗車等待期間也能輕鬆自在。

 

安全環境再強化

地坪採用高防滑係數材質,即使在雨天濕滑天候也能安全行走,讓每位顧客進出都更安全。全場採自然採光與通風設計改良,提升整體環境品質。

 

 

德國萊因誠摯邀請舊雨新知親臨新址,體驗更完善的中古車檢測服務。未來我們也將持續秉持專業、透明、值得信賴的核心理念,為每一位顧客把關每輛車的安全與價值,協助消費者做出更明智的車輛購買決策。

 

如需進一步了解新場地相關服務,歡迎造訪或致電客服專線,我們將竭誠為您服務。

Andy 老爹 : 對車輛有疑慮 ? 找專業驗車 揪出泡水車/事故車 !

 

同場加映:

7/26  買車不能靠運氣!中古車認證 x 配件選購實戰講座 : 名額有限, 報名從速!

[限時邀請] 7/26 認證中古車講座陪你挑好車,小藍標活動同步開跑

慶祝玩具安全檢測70週年:TÜV萊茵的全球玩具檢測里程碑 Celebrating 70 Years of Toy Safety Excellence: TÜV Rheinland’s Legacy in Toy Testing

2025年,德國萊茵TÜV集團(簡稱「TÜV萊茵」)迎來其開展玩具安全檢測服務70週年這一重要里程碑。自1955年完成首例玩具測試以來,TÜV萊茵始終致力於守護全球兒童的使用安全,持續引領全球玩具合規體系的演進。點擊此處了解更多

Celebrating 70 Years of Toy Safety Excellence: TÜV Rheinland’s Legacy in Toy Testing

In 2025, TÜV Rheinland proudly celebrates a remarkable milestone — 70 years since it conducted its first toy safety test, marking the beginning of a legacy that has safeguarded generations of children across the globe and helped shape the global toy safety landscape

How Toy Safety Began at TÜV Rheinland

The story began in 1955, when TÜV Rheinland conducted its first toy safety test for a Sandspiel (sandbox playset) in Germany. Motivated by post-war recovery and rising concerns over consumer safety in mass-produced goods, this test laid the foundation for a globally recognized system of toy compliance — one that ensures toys meet the highest expectations in mechanical integrity, flammability resistance, and chemical safety.

Nuremberg: Toy Capital of Europe and TÜV Rheinland’s Testing Stronghold

Nuremberg’s identity as the “Toy Capital of Europe” is no coincidence. Dating back to the 19th century, it was home to many of Germany’s historic toy manufacturers and has hosted the world’s largest international toy fair — the Spielwarenmesse — since 1950. Recognizing this significance, TÜV Rheinland established Europe’s largest toy testing laboratory in Nuremberg. The lab offers full-scope testing and certification aligned with global standards including EN 71, ASTM F963, ISO 8124, and REACH.

Toy Safety Evolves: Regulation, Market, and Mindset

As the toy industry evolved, so did safety expectations:

  • 1950s–1960s: Toy safety in Germany relied largely on voluntary testing. TÜV Rheinland led mechanical and material assessments in the absence of formal laws. The tests were based on adapted product tests and standards, for example from the field of industrial plant testing.
  • 1970s: Public awareness grew due to media reports and consumer advocacy, prompting early DIN standards like DIN 66070-1 and DIN 66070-2 Toys Safety requirements and Toy testing
  • 1980s: Since the launched of the electrical toys, German Standardization Institutes released DIN  57700-210 Safety of electrical toys
  • 1988: The European Commission launched the Toy Safety Directive (88/378/EEC) — the first harmonized framework across EU member states. TÜV Rheinland played a key role in helping manufacturers align with these new legal obligations, marking its transformation into a strategic global compliance partner.

A Trusted Partner in the World’s Toy Manufacturing Powerhouse

As global toy production shifted to  China emerged as industry strongholds, now accounting for over 70% of the world’s toy output. TÜV Rheinland acted early, establishing a comprehensive testing network across Greater China to support manufacturers aiming to export to regulated markets.

  • The first TÜV Rheinland toy lab in Hong Kong was established in the 1990s, followed by key facilities in Shenzhen, Shanghai, Ningbo and Qingdao
  • These labs provide a full suite of testing services for chemical, mechanical, electrical, flammability, usability, and smart/connected toys.
  • Services include pre-compliance assessments, risk mitigation, voluntary certifications and regulatory workshops for local QA teams.

New Investment: Strengthening East and South China Testing Capacity

In response to growing demand, TÜV Rheinland invested further in 2024 by launching our company largest state-of-the-art toy testing hub at the Yangtze River Delta Operation Hub in Taicang (Jiangsu) near Shanghai, and expanding toy testing capacity in Shenzhen Greater Bay Area (Shenzhen) Operation Hub to better serve South China’s manufacturing base.

With labs across Greater China, TÜV Rheinland connects local manufacturers to global markets — offering unmatched proximity, technical expertise, and regulatory insight.

TÜV Rheinland: A Global Leader in Toy Safety Testing

Today, TÜV Rheinland tests over 40,000 toy samples annually across its global laboratory network. From classic toys to IoT-enabled devices, the company continues to set the benchmark for independent, science-based product evaluation.

With 70 years of experience, deep roots in both Europe and Asia, and a commitment to innovation and child safety, TÜV Rheinland stands as one of the most experienced and trusted toy testing partners in the world.

歐盟報廢車輛迴圈法案的新要求: 歐盟塑膠回收技術介紹

應歐盟ELV新法規(又稱:報廢車輛迴圈法案)提案的新要求,未來放歐盟市場銷售的新車必須包含至少25% 的再生塑膠。文章分享了再生塑膠在車輛上的應用。

 

TÜV萊因專家將為給您介紹歐盟塑膠的回收技術。  一級和二級供應商會從回收商(專門從事利用廢料生產塑膠顆粒的三級供應商)處採購回收材料。

 

消費後塑膠的機械回收工藝

01  收集廢塑膠

02 分離聚合物類型(在可能的情況下)

03 粉碎(如果尚未粉碎)

04 分離碎料以獲得盡可能均勻的產出(通常基於濕密度分揀技術)

05 混合產出(通過將其與填料和添加劑一起熔化)

06 擠出回收顆粒

在大多數情況下,這些步驟並非由一家企業完成。

 

根據車型和品牌的不同,汽車中回收塑膠的總重量(包括消費前和消費後塑膠廢棄物)從 5%到 15%不等。在某些情況下,可以達到 20%。 為提高回收效率,歐盟鼓勵行業對報廢汽車的回收利用適用更多的技術,包括:廢氣化、拆解、粉碎殘渣技術(ASR)、粉碎後處理技術(PST)和特定材料的回收利用等。

 

ASP + PST 和特定回收工藝中不同材料的回收效率

 

粉碎後處理技術(PST)可以在分揀和淨化後獲得符合操作要求的車用塑膠,但要實現完全閉環,避免大量車用塑膠仍被丟棄,這方面仍有很大的改進空間(Li,2017 年)。

 

不同後粉碎處理技術(PST)概覽


 

對車輛和車輛部件中的再生塑膠,TÜV萊因可提供相關的合規性評估服務:

  • ELV 限制物質測試
  • ELV法規合規性評估
  • REACH SVHC及 Annex XVII 限制物質測試
  • REACH 法規合規性評估
  • PCR(Post-Consumer Recycled)plastic certification 消費後再生塑膠認證
  • Recycled Material Verified 再生材料產品認證

 

面對ELV新法規的要求,汽車製造商需要在車輛設計和生產的各個環節考慮再生塑膠的應用,這無疑給整個供應鏈帶來了挑戰。但從長遠來看,提高再生塑膠在汽車中的使用比例,不僅有利於減少塑膠垃圾對環境的污染,促進資源的循環利用,也將推動汽車行業技術創新和商業模式變革。作為全球領先的檢測認證機構,TÜV萊因將為汽車行業的永續發展提供專業的技術服務和解決方案,助力企業在激烈的市場競爭中把握先機,實現與環境和諧共生的高品質發展。

 

進一步相關資訊請洽詢德國萊因交通服務部門 / Peter Lee (email : PeterCY.Lee@tuv.com)

智慧護航,安全隨行:ISA智慧車速輔助系統法規解讀

在快節奏的現代交通環境中,行車安全始終是人們關注的焦點。而智慧車速輔助系統(ISA)的出現,為出行安全提供了強大的技術保障。

 

2021年11月17日,歐盟正式發佈了智慧車速輔助系統 (Intelligent Speed Assistance — ISA) 的法規文本,編號為 Regulation (EU) 2021/1958。根據法規要求,自2022年7月6日起,所有新車型必須配備 ISA 功能;對於 2022 年 7 月 6 日之前的老車型,則需要在 2024 年 7 月 7 日之前完成 ISA 功能的升級。

 

 

TÜV萊因為全球領先的檢測,檢驗與認證機構,自2022年起已經與大中華區內多家主機廠和零部件供應商建立了深度合作關係,同時為眾多車企獲得通往歐盟市場的整車型式認證(WVTA)證書提供了強有力的技術支撐。

 

根據歐盟 ISA 法規的規定,ISA功能的認證測試必須由歐盟交通部官方授權的認證機構授權工程師進行現場見證。測試內容包括驗證系統是否滿足限速資訊功能(SLIF)、限速警告功能(SLWF)或車速控制功能(SCF)的相關要求。此外,測試還需在歐盟真實道路環境下行駛400公里,其限速標識牌的正確識別總里程數不得低於90%,同時在單個道路行駛場景(城區公路、郊區公路、高速公路)中的識別率不得低於80%。值得一提的是,除非ISA系統已獲得軟體工具單元(STU)證書,否則該法規是目前唯一要求將車輛實際送至歐盟國家進行真實道路測試的法規。

 

真實道路測試關鍵指標

 

ISA智慧車速輔助系統  由哪些元件和功能組成?

 

智慧車速輔助系統 (ISA) 是一項集成了多種先進技術的安全駕駛協助工具。它利用攝像頭、全球導航衛星系統(GNSS)和數位地圖等設備獲取限速資料,説明駕駛員將車速保持在安全範圍內。作為一項駕駛員協助工具,ISA系統不僅可以避免超速事故的發生,還能有效減輕事故後果。

 

除了向駕駛員提供限速資訊外,ISA系統還可以配合車輛限速裝置主動干預車速,確保車輛在安全車速下運行。依據歐盟法規要求,ISA智慧車速輔助系統需要在人機界面提供限速資訊功能(SLIF)和限速警告功能(SLWF)、或速度控制功能(SCF,將車速降低到限速範圍內)到整車上。

 

ISA智慧車速輔助系統  功能有哪些相關要求?

1. 視覺+級聯聲音警告 Regulation (EU) 2021/1958

視覺+級聯聲音警告:當車輛超過限速時,視覺警告可以通過報警符號片的閃爍向駕駛員提供視覺報警,級聯聲學警告向駕駛員提供聽覺警告。

 

2. 視覺+級聯振動警告 Regulation (EU) 2021/1958

當車輛超過限速時,視覺警告可以通過報警符號片的閃爍向駕駛員提供視覺報警,級聯振動警告使用踏板振動在車輛超過限速時向駕駛員提供觸覺警報。

 

3. 單觸覺回饋  Regulation (EU) 2021/1958

觸覺回饋系統依靠加速踏板的恢復力向駕駛員提供回饋。當駕駛員超過限速時,踏板將變得更難踩下,從而提供給駕駛員車速太快的物理提示。

 

4. 速度控制功能(SCF) Regulation (EU) 2021/1958

ISA系統也可以將車速限制在感知限速範圍內,可以通過限制發動機的功率來實現。此外,ISA 系統還可以與車輛的其他控制系統進行交互;例如,與車輛的巡航控制系統相結合,在巡航模式下自動調整車速以符合限速要求,避免超速情況的發生。

 

ISA 智慧車速輔助系統整合先進的技術手段,有效提升了行車安全性和規範性,減少因超速導致的事故風險,為駕駛者提供更安全可靠的行車保障。ISA系統的應用,充分體現了汽車安全技術的不斷發展和進步。

 

我們與 ISA 系統一同上路,享受更加安全、舒適的駕駛體驗,讓每一次旅程都充滿信心與保障。因為,安全永遠是我們行車路上最重要的追求。

 

進一步相關資訊請洽詢德國萊因交通服務部門 / Peter Lee (email : PeterCY.Lee@tuv.com)

強化電動自行車頭部防護:TÜV 萊因開展 NTA 8776 認證測試服務

在當今社會,電動自行車的普及率不斷攀升,隨之而來的騎行安全問題也日益受到重視。特別是電動自行車安全帽的安全性,已然成為公眾和行業關注的焦點。

 

 

近期,TÜV 萊因安全帽實驗室宣佈正式推出NTA 8776:2016-12荷蘭電動自行車安全帽認證測試服務,這是我們不斷擴大安全帽認證測試領域的最新成果。這一服務的推出,標誌著我們在追求騎行安全的道路上又邁出了堅實的一步。

 

NTA 8776:2016-12認證簡介

 

NTA 8776:2016-12 認證是荷蘭電動自行車(S-EPAC)安全帽的權威認證,該標準由荷蘭標準組織 NEN 發佈,明確規定了S-EPAC 騎行者安全帽的性能要求。

 

相較於EN 1078自行車安全帽標準,NTA 8776在測試區域和衝擊能量吸收測試方面做出了一些調整:

  • 測試區域擴大,以提供更全面的頭部保護;
  • 在衝擊試驗中,增加了衝擊高度和速度。
  • NTA 8776:2016-12認證要求包括:

  4.1 材料

  4.2 結構

  4.3 視野

  4.4 衝擊能量吸收

  4.5 耐久

  4.6 系帶系統

 

什麼是S-EPAC?

 

S-EPAC是指整車品質≤35kg,使用輔助推進功率小於或等於實際踏板功率的四倍,且不超過4000 W,當車速≤45km /h時切斷輔助推進輸出的自行車,即EU 2018/2013法規中的L1e-B 類車輛。

 

TÜV 萊因安全帽實驗室擁有先進的測試設備和專業的技術團隊,能夠為您提供全面的 NTA 8776:2016-12 荷蘭電動自行車安全帽認證測試服務。我們的測試流程嚴格遵循 NTA 8776:2016-12 標準要求,確保測試結果的準確性和可靠性。

 

隨著TÜV萊因安全帽實驗室推出NTA 8776:2016-12 荷蘭電動自行車安全帽認證測試服務,未來,電動自行車騎手的安全將得到更加全面的保障。這不僅是對個體安全的守護,更是對整個電動自行車行業健康發展的推動。未來,我們將助力安全帽生產製造商提升技術創新和安全標準,共創一個更加安全、綠色、高效的騎行未來。

2024 越南汽車國家技術法規(QCVN)更新 – 汽車後視鏡

近年來,越南持續推進改革,經濟穩步發展,據越南統計局數字,本國人口於 2023年底突破1億,GDP增速超過5%,汽車需求量和購買力持續上升。越南政府為了打造全汽車產業鏈,對汽車行業的政策傾斜力度逐漸加大(零部件製造激勵及KD製造的推進等) ,交通基礎設施建設發展迅速,是東南亞中非常具有發展潛力的汽車市場之一。

 

越南的法律法規體系比較複雜,由政府法令、部委通告、TCVN標準 (國家標準)、QCVN標準 (國家技術法規) 等共同組成。對於汽車技術法規來說,交通運輸部負責出臺技術通告(TT-BGTVT),科學技術部審查交通部技術通告後,將其轉化為QCVN標準(國家技術法規)。

 

隨著汽車市場的發展,越南近年來持續頒發和更新汽車技術法規。截止目前,2024年主要更新並實施了兩條汽車QCVN標準,分別是:

 

  • “01:2024 QCVN 33:2019/BGTVT 汽車後視鏡”
  • “QCVN 35:2024/BGTVT 道路機動車輛前照燈”

 

法規更新內容詳解

01:2024 QCVN 33:2019/BGTVT

2024 年 6 月 3 日,越南頒布汽車後視鏡國家技術法規 “QCVN 33:2019/BGTVT” 的修正案 “01:2024 QCVN 33:2019/BGTVT” 。此次修訂主要針對電子後視鏡(Camera-Monitor System,簡稱CMS)的定義,後視鏡和電子後視鏡的技術要求,核對總和測試方法,技術文檔要求,測試樣本等內容。具體更新內容如下:

 

新增及修訂術語定義

  • 電子後視鏡定義,包含攝像頭和監視器的定義(修訂第1.3.2條)
  • 後視鏡同一型式判定(修訂第 1.3.7 條)
  • 電子後視鏡同一型式判定(修訂第1.3.8條)
  • I類電子後視鏡定義(修訂第1.3.15條)

 

技術要求變動

通用技術要求

  • 後視鏡、電子後視鏡上必須有製造商的商標或標識。製造商的商標或標識應清晰、可辨、不易擦除(修訂第2.1.1.1條,修訂第2.2.1.1條)
  • 所有後視鏡必須可以調節(修訂第2.1.1.2條)
  • 後視鏡安裝要求的不適用情況:本法規第 2.1.1.4 點規定的要求不適用於當車輛處於與設計最大體積相對應的負載狀態時,後視鏡下邊緣安裝在距離停車平面不小於 2 m 的後視鏡(增加第2.1.1.8條)
  • 後視鏡反射面曲率半徑要求的不適用情況(增加第2.1.1.9條)
  • 電子後視鏡的安裝要求和反射面曲率半徑要求及其不適用情況(修訂第2.2.1.3條,增加第2.2.1.4條,修訂第2.2.1.5條,修訂第2.2.1.6條,增加第2.2.1.7條)

 

尺寸要求

IV、V、VI類鏡的尺寸要求(修訂第2.1.2.3條,修訂第2.1.2.4條,修訂2.1.2.5條)

 

抗衝擊要求

  • 必須按照本規定附件D 測試反射面的抗衝擊強度(修訂第2.1.4.1條)
  • 附件D的不適用情況(修訂第2.1.4.4條,修訂第2.2.2.2條)
  • 若不適用附件D,後視鏡、電子後視鏡上必須有 “2 ∆m” 的清晰符號,且難以擦除,品質、技術安全和環保證書也必須記錄此內容(修訂第2.1.4.4.4條,修訂第2.2.2.2.4條)

 

檢測和測試方法

  • 生產、組裝和進口的後視鏡必須按照汽車零部件的品質、技術安全和環境保護規定進行檢驗、測試和認證(修訂第3.1條)
  • 在越南本地生產和組裝的汽車上的後視鏡檢驗要求請參考交通運輸部第25/2019/TT-BGTVT號通告《規範機動車生產和組裝中的品質、技術安全和環境保護檢驗》,及其修正案第46/2019/TT-BGTVT號、49/2023/TT-BGTVT號通告;
  • 進口汽車上的後視鏡檢驗要求請查閱交通運輸部第03/2018/TT-BGTVT號通告《進口機動車品質、技術安全和環境保護檢驗規定》,及其修正案第05/2020/TT-BGTVT、30/2024/TT-BGTVT號通告。

 

技術文檔要求變動

後視鏡的技術圖紙必須顯示後視鏡的類型、形狀和主要尺寸(上一版本僅要求尺寸),並至少附有以下參數(修訂第3.2.1.1條):

  • 製造商的商標或標識及其在鏡子上的位置
  • 當車輛處於與設計最大體積相對應的負載狀態時,後視鏡在車輛上的安裝位置和後視鏡下邊緣距離停車平面的尺寸(新增要求)
  • 反射面保護罩的硬度
  • 反射面的曲率半徑
  • 反射面保護罩邊緣的曲率半徑
  • 鏡面上“2 ∆m”符號的位置(如有)(新增要求)

 

測試樣品

  • 每種待測後視鏡或電子後視鏡(CMS)需提供 3 個測試樣品(修訂第3.2.2條)

 

新版法規生效日期及過渡要求

01:2024 QCVN 33:2019/BGTVT

1.  2024 年 12 月 5 日起生效

2.  對於在生效日期之前註冊的測試報告,繼續按照QCVN 33:2019/BGTVT進行檢測和品質認證

3.  對於已根據QCVN 33:2019/BGTVT進行測試/認證且測試報告/證書仍然有效的後視鏡,無需再進行測試或重新認證

 

總結與建議

01:2024 QCVN 33:2019/BGTVT

新法規的生效日期在即,有意出口越南的主機廠和後視鏡製造商需要儘快對新的技術法規要求做出研判,以避免在申請認證時出現不符合的情況。同時,由於越南法規體系的複雜性,其在越南本地生產製造的汽車和進口汽車擁有兩套不同的認證體系和管理辦法,主機廠和製造商也需要對相關法規進行研究,以避免錯誤流程造成的週期和經濟上的損失。

 

另外,由於越南基礎設施建設和汽車工業的飛速發展,相關法律法規的更新速度也在不斷加快。2024年,越南通過了大量汽車領域的新法規草案,涉及機動車、掛車和半掛車等車型的品質檢驗、技術安全和環境保護等標準,預計將於未來幾年內逐步實施。主機廠和製造商需要持續關注法規更新進度,以迎合快速變化的越南汽車市場管理要求。

 

TÜV萊因為國際領先的技術服務供應商,擁有豐富的多國認證經驗,可以為客戶提供完整高效的越南認證服務、法規調研服務和法規更新追蹤服務。我們將持續為客戶提供最新行業動態和技術支援,共同迎接挑戰,把握機遇。

 

進一步相關資訊請洽詢德國萊因交通服務部門 / Peter Lee (email : PeterCY.Lee@tuv.com)

迎戰駕駛分心挑戰:TÜV 萊因成功完成歐盟 ADDW 認證

隨著社會的發展,交通狀況日益複雜,駕駛員分心駕駛已逐漸成為道路安全的隱患。駕駛員在駕駛過程中使用手機或操作車輛螢幕等行為,會大幅度分散其注意力,從而增加了交通事故的風險。

 

為了解決這一問題,歐盟於 2019 年 11 月 27 日發佈了新版安全法規(EU) 2019/2144 , 要求 M 和 N 類機動車從 2024 年 7 月 7 日起為新認證車輛配備 ADDW 系統。2023年11月底發佈了ADDW 法規(EU)2023/2590,規定了ADDW 型式批准的具體測試程式和技術要求。這一規定的發布,旨在通過技術手段提高駕駛安全性,降低因駕駛員分心而引發的交通事故。對於有志于進軍國際市場的汽車企業來說,符合這一新法規的要求,無疑成為了其產品成功進入歐洲市場的關鍵。

 

TÜV萊因為全球領先的檢測、檢驗與認證機構,成功完成了首次針對 ADDW 的認證試驗,為大陸車企提供了有力的支援。

 

什麼是ADDW?

 

高級駕駛員分心預警系統(Advanced Driver Distraction Warning Systems,簡稱ADDW)是一種先進的駕駛輔助系統,主要用於監測駕駛員的行為和狀態,以預防由於駕駛員分心而導致的交通事故。這種系統通過各種感測器和演算法,即時監測駕駛員的眼睛移動、頭部轉動、手部動作等,以判斷駕駛員是否在專注駕駛。一旦系統檢測到駕駛員可能存在分心的情況,就會立即發出警告,提醒駕駛員注意駕駛。高級駕駛員分心預警系統是智慧駕駛和車聯網技術的重要應用之一,對於提高道路交通安全,防止交通事故具有重要意義。

 

法規在技術層面上主要做出以下幾項要求:

 

01  在其規定的Area 3 區域內,低速段區間發生分心行為後,在 6.5 s 以內向駕駛員發出警告,高速段區間發生分心行為後,在 4 s 以內發出警告

 

02  ADDW系統需要適應不同光照條件,白天與黑夜均能有效報警

 

03 ADDW系統應盡可能降低誤報警率

 

04 認證的方式為點檢,還需要 OEM 提供法規規定的檔包,其中包括驗證測試結果

 

在這樣的背景下,TÜV萊因積極行動,迅速回應新的法規要求,開展ADDW系統的研究與試驗工作。為了確保認證測試的準確性和可靠性,TÜV萊因聯合中汽研寧波檢測中心,針對某款知名新能源車型的認證需求,與製造商緊密合作,共同見證了此次 ADDW 認證測試的成功實施。經過嚴格的測試,結果顯示,該新能源車型的 ADDW 系統在功能上完全符合法規要求,能夠在法規規定的區域內有效識別駕駛員的分心行為,並在規定時間內發出警告。

 

為了全面評估 ADDW 系統在識別和警告駕駛員分心行為方面的性能,測試團隊精心設計了多種模擬駕駛場景,覆蓋了不同環境下的各類分心情況。團隊對系統的準確性和可靠性進行了深入分析,確保了評估結果的全面性和客觀性。這些成果不僅為製造商提供了寶貴的系統合規性建議,同時也積累了德國萊因在 ADDW 系統認證測試領域的首批經驗,為未來技術的發展奠定了堅實的基礎。

 

           測試資料獲取

 

未來,隨著全球汽車市場的不斷發展和消費者對汽車安全性能要求的不斷提高,智慧輔助系統將成為汽車安全領域的重要發展方向。TÜV萊因將繼續發揮其專業優勢,為汽車企業提供更加全面、高效的汽車安全認證服務,推動汽車產業向更安全、更可持續的未來邁進。

 

進一步相關資訊請洽詢德國萊因交通服務部門 / Peter Lee (email : PeterCY.Lee@tuv.com)

歐盟ELV法案新要求 : 再生塑膠納入車輛設計藍圖

隨著全球環保意識的不斷提高,汽車行業也面臨著巨大的可持續發展挑戰。如何在保證汽車性能和安全的同時,最大限度地減少對環境的影響,已成為汽車製造商不得不面對的問題。歐盟作為世界汽車工業的重要市場和生產基地 ,在推動汽車行業綠色發展方面一直走在前列。

 

應歐盟ELV新法規(又稱:報廢車輛迴圈法案)提案的新要求,未來放歐盟市場銷售的新車必須包含至少25%的再生塑膠。這無疑給汽車設計師和製造商帶來了新的挑戰,但同時也為汽車行業的可持續發展指明了方向。

 

本文將介紹歐盟關於汽車行業再生塑膠使用情況的統計,説明車輛設計師和 OEM 車廠瞭解再生塑膠在車輛上的應用,以更好的管理再生塑膠在車輛中的使用,提高車輛的整體效益,並滿足歐盟 ELV 新法規的要求。

 

目前,歐盟委員會正在修訂《報廢汽車指令》(ELV 指令)2000/53/EC 和《關於機動車輛可再利用性、可回收性和可回收性的型式批准》指令(3R 指令)2005/64/EC,新的法規將稱之為 ELV法規(又稱:報廢車輛迴圈法案),將取代ELV指令和3R指令,成為歐盟車輛准入的新法規。(註1)

 

歐盟 ELV 指令的修訂路線

在ELV新法規的提案中,歐盟將為投放歐盟市場的新車引入強制性再生塑膠含量目標,規定每種車型所含的塑膠,按重量計算,應至少含有 25% 從消費後塑膠廢棄物中回收的塑膠,其中,至少有25%來自報廢車輛回收的塑膠。也就是說,按全車塑膠總重量計算,至少6.25%的塑膠應來自車輛的再生塑膠,至少18.75%的塑膠應來自其它消費後回收的再生塑膠。

 

據統計,目前汽車中消費後材料的平均再生塑膠含量為塑膠總重量的 2% 至3%,對某些領先的 OEM 車廠,這一比例可達到 6% 至 8%(註2)。為何歐盟要制定這樣的雄心勃勃且大幅領先的目標呢?

 

歐盟是世界上最大的汽車生產國之一。汽車行業為 1380 萬歐洲人提供了直接和間接就業機會,占歐盟總就業人數的 6.1%。2021 年,歐盟共生產了 1200 萬輛汽車(轎車、貨車、卡車、公共汽車),其中 1150 萬輛投放到歐盟市場。

 

歐洲汽車行業占歐盟鋼鐵行業需求量的 19%(超過 700 萬噸/年)、塑膠總消費量的 10%(600 萬噸/年 ),以及鋁(42%用於所有運輸設備,約 200 萬噸/年184 )、銅(6%用於汽車零部件)、橡膠(占普通橡膠製品產量的 65% )和玻璃(歐盟生產 150 萬噸平板玻璃187 )需求量的很大一部分。
根據歐盟統計,通常一輛汽車中,塑膠占汽車總重量的11%~16%不等。

 

 

乘用車應用中使用的塑膠種類多達30餘種。主要塑膠類型包括 PP(37%)、PUR(15%)、PA(12%)、PE(8%)、PVC(7%)、ABS(7%)、PET(5%)以及包括 PC 在內的其他聚合物、Pmma、PBT、POM(9%)等。(註3)

 

從歐盟ELV法規(報廢車輛迴圈法案)的角度來看,車上使用的塑膠可被視為“庫存”材料。在價值鏈的下游,當車輛使用壽命結束時,車輛會被收集到授權的處理設施(回收工廠),在那裡進行預處理、拆解,粉碎與回收。歐盟每年從各行各業收集的消費後塑膠總量達 2460 萬噸。收集後,這些塑膠要麼被回收利用,要麼被焚燒以回收能源,要麼被填埋。根據歐盟統計資料,關於車輛產生的消費後塑膠並不樂觀。目前,ELV中只有19%的塑膠(20萬噸)被回收利用,10萬噸被有效回收,而每年約有80萬噸塑膠垃圾被填埋(40%)或送往垃圾發電廠用於能源回收(41%)。

 

在汽車行業,對再生塑膠的需求來自 OEM 車廠,主要是出於節約成本的考慮,以及順應市場趨勢的需要,如消費者對可持續發展問題的認識提高。在塑膠塑膠材料的迴圈利用方面,過去十年的情況表明,在新車中使用塑膠回收料的潛力尚未得到充分開發,汽車行業的領跑者已經證明,將再生塑膠融入新車在技術上是可行的,因為他們已經將消費後再生塑膠塑膠用於新車的多個部件,主要是內飾和傳動系統部件。

 

舉幾個公開的例子,梅賽德斯和雷諾等汽車製造商在新車型中使用了大量再生塑膠 ,例如梅賽德斯 E 級轎車使用了54.4千克再生塑膠塑膠製成的72個零部件,雷諾 Espace 車型使用了 53 千克再生塑膠。此外,一些製造商還將回收的聚氨酯泡沫塑膠和PET塑膠瓶製成的纖維應用於座墊、地毯等部件。富豪更是宣佈從2025年起,每輛新車中至少 25% 的塑膠由再生材料製成,並推出了一款特別版 XC60 混動 SUV 來展示其可行性。

 

對於車輛和車輛部件中的再生塑膠,TÜV萊因可提供相關的合規性評估服務:

  • ELV 限制物質測試
  • ELV法規合規性評估
  • REACH SVHC及 Annex XVII 限制物質測試
    REACH法規合規性評估
  • PCR(Post-Consumer Recycled)plastic certification 消費後再生塑膠認證
  • Recycled Material Verified 含再生材料產品認證

 

 

註1: https://environment.ec.europa.eu/topics/waste-and-recycling/end-life-vehicles_en

註2: Maury, T., Tazi, N., Torres De Matos, C., Nessi, S., Antonopoulos, I., Pierri, E., Baldassarre, B., Garbarino, E., Gaudillat, P. and Mathieux, F..、Towards recycled plastic content targets in new passenger cars, EUR 31047 EN, Publications Office of the European Union, Luxembourg, 2022, ISBN 97892-76-51784-9 (online), doi:10.2838/834615 (online), JRC129008.

註3: COMMISSION STAFF WORKING DOCUMENT IMPACT ASSESSMENT REPORT

 

進一步相關資訊請洽詢德國萊因交通服務部門 / Peter Lee (email : PeterCY.Lee@tuv.com)

新規揭秘:印度市場電子後視鏡 (CMS) 出口規定解析

隨著科技飛速發展,汽車工業也在不斷革新與升級。印度為全球重要的汽車市場之一,其對汽車零部件的規定和標準具有重要意義。近期,印度汽車工業標準(AIS)針對電子後視鏡(CMS)的規定進行了重大更新,這一變革不僅影響著製造商的產品設計和生產,也對整個汽車行業未來發展提出了新要求。

在這篇文章中,我們將深入探討 AIS 001 (Part 1) (Rev. 2) 新規的具體內容,以及它如何影響印度市場的電子後視鏡出口規定。 印度汽車工業標準(The Automotive Industry Standards,簡稱 AIS)近期對後視鏡的相關規定進行了更新,其中AIS 001 (Part 1) (Rev. 2) 已經正式生效。此次修訂主要針對電子後視鏡(Camera-Monitor System,簡稱 CMS)的定義、性能要求以及測試專案進行了明確和細化。

 

AIS 001 (Part 1) (Rev. 2) 版法規的主要更新內容

術語定義

AIS 001

– CMS在AIS 001法規中被稱為“Camera-monitor device for indirect vision”(見第2.1.2條款)

– 同時具備傳統視鏡和 CMS 功能的系統被稱為 “Mirror and CMS dual function system”

– 新增了如PLSCF、PLSDF 等與 CMS 相關的術語定義

 

CMS功能性要求

AIS 001

– 通用要求 : 包括可調整性、外廓圓角半徑、固定孔及凹座要求、CMS 轉軸要求(見第 6.2.2.1 條款)

– V 類和 VI 類 CMS 功能性要求 :  涉及過曝、最低對比度、平均亮度等方面(見第 6.2.2.2 條款)

– I 類至IV類 CMS 功能性要求 :  包括監視器亮度調整、系統可操作性、成像品質、時間特性、人體工學要求等方面(見第6.2.2.3條款)

 

測試項目

AIS 001

– 常規後視鏡測試項目 : 如一般性能、發射面反射率、撞擊性能、抗彎曲性能、曲率半徑、後視鏡尺寸等

– V類和 VI 類CMS測試專案要求 : (如過曝、最低對比度、平均亮度) – 條款 6.2.2.2.1 至 6.2.2.2.4 (參考ISO 15008相關要求)

– I 類至IV類CMS測試專案要求 : (如監視器亮度、成像品質、時間特性) – 條款 6.2.2.3.1至6.2.3.2 (參考 ISO 16505、CIE 1976、ISO 9241-305 相關要求)

 

新版法規相關過度要求說明

AIS 001

– AIS 001 (Part 1) (Rev. 1) 版本法規將不再頒發新證書

– AIS 001 (Part 1) (Rev. 2) 版本法規則自強制日起統一簽發新證書。所有在效期內的後視鏡證書將在 2025 年 1 月 15 日前逐步更換為新證書

 

應對策略

基於上述變化,主機廠和後視鏡製造商需要提前對在研(或已獲證)CMS後視鏡的技術符合性做出研判。這樣可以避免在申請認證(或CoP週期的測試過程)中出現功能/要求不符合的情況,從而避免造成週期/經濟上的損失,影響產品(整車/單品)在當地市場的佈局。

 

關於CMVR

CMVR是印度中央機動車輛法案(CENTRAL MOTOR VEHICLES RULES)的縮寫,是印度整車及零部件認證的基礎。所有汽車、工程機械、農林拖拉機、汽車發動機及零部件等必須滿足CMVR法規要求,並通過檢測與認證流程,才能進入印度市場。印度汽車研究協會(ARAI)和印度國際汽車技術中心(ICAT)是負責檢測和發證的主要機構。

 

TÜV萊因作為 ARAI 和 ICAT 最大的 CMVR 認證的指定合作夥伴之一,負責整個認證流程,包括專案管理、工廠檢驗及抽樣送檢、抽樣測試、測試報告分析,直至授權發證機構頒發證書。我們將持續為客戶提供最新的行業動態和技術支援,共同迎接挑戰,把握機遇。

 

AIS 001 (Part 1) (Rev. 2) 的新規為印度市場上的電子後視鏡設定了更高的標準,這不僅是對產品品質的一種保障,也是推動行業技術進步的一大步。對於製造商而言,適應這些新規定,優化產品設計和生產流程,是進入和拓展印度市場的關鍵。同時,瞭解和掌握這些新規,將使他們能夠更好地滿足市場需求,把握未來的發展機遇。隨著新規的實施,我們期待看到更加安全、高效的電子後視鏡產品在印度市場上湧現,為駕駛者提供更優質的駕駛體驗。

歐盟 – ECHA新增3項高度關切物質,現在有250項高度關切物質

2025年6月25日,ECHA公告新增3項高度關切物質,目前已納入250項可能對人體或環境造成危害的化學物質。企業有責任管理這些化學品的風險,並向客戶與消費者提供其安全使用的資訊。

兩種新加入的物質屬於極度持久且高度生物累積,廣泛應用於化妝品、個人護理產品及汽車保養產品等領域。此外,另有一種對生殖具有毒性的物質,則用於紡織處理製品與染料中。

三種化學物質及其風險應用如下表:

化學物質 建議納入原因 潛在風險應用
1,1,1,3,5,5,5-heptamethyl-3-[(trimethylsilyl)oxy]trisiloxane

EC No. 241-867-7
CAS No. 17928-28-8

vPvB (Article 57e)
非常持久性及生物累積
用作實驗室試劑,並用於化妝品、個人護理產品及香水與香精中
Decamethyltetrasiloxane

EC No. 205-491-7
CAS No. 141-62-8

vPvB (Article 57e)
非常持久性及生物累積
用於化妝品與個人護理產品、潤滑劑及油脂,以及汽車保養產品中
tetra(sodium/potassium) 7-[(E)-{2-acetamido-4-[(E)-(4-{[4-chloro-6-({2-[(4-fluoro-6-{[4-(vinylsulfonyl)phenyl]amino}-1,3,5-triazine-2-yl)amino]propyl}amino)-1,3,5-triazine-2-yl]amino}-5-sulfonato-1-naphthyl)diazenyl]-5-methoxyphenyl}diazenyl]-1,3,6-naphthalenetrisulfonate; Reactive Brown 51

EC No. 466-490-7
CAS No. –

Toxic for reproduction (Article 57c)
對生殖系統有毒性
用於紡織處理產品和染料中

 

公告連結: All news – ECHA

 

德國萊因TUV Rheinland能為您做什麼?

德國萊因TUV Rheinland擁有專業化學檢測實驗室,能夠提供範圍廣泛的分析服務,如: RoHS、REACH SVHC、SCIP文件製作、各國食品接觸材料 (FCM)法規檢測、POP、美國各州優先化學物質 (CHC)、626項PFAS檢測服務。

能依您的需求提供優惠費用以及最具效益的方案評估,並持續提升分析能力,協助一定風險的把關,以符合出口至各國的法規要求。

 

若有檢測需求, 歡迎與我們聯繫

聯絡人: Ms. Ada Tsao Ms. Kelly Lin
電話: (+886) 02-2172-1196 (+886) 02-2172-1249
Email: AdaHY.Tsao@tuv.com KellyYT.Lin@tuv.com

 

關於REACH法規資訊,你可以從這裡了解更多:

汽車電子 EMC 測試的潛藏挑戰:光電轉換信號對暗室背景雜訊的影響與對策

隨著汽車行業的快速發展,車內電子設備數量不斷增加、其複雜性持續攀升,車載通訊方式也日益多樣化,比如我們常見的LIN通訊、CAN通訊、乙太網通訊、Flexray 通訊等。在汽車電子電器零部件電磁相容性(EMC)測試中,通常這些信號都需要經過光電轉換器進入到電波暗室中,然後再與測試樣品進行通訊,以隔離暗室外信號帶來的干擾。

 

 

然而,光電轉換器在電-光-電的轉換過程中會引入一部分電磁干擾,成為電波暗室中的額外底噪,影響測試結果的精確性。在實際應用中,光電轉換信號對電波暗室環境底噪的影響主要來源於以下幾個方面:

 

  • 轉換器電磁干擾:光電轉換器在將電信號轉化為光信號,或從光信號轉化回電信號的過程中,會產生一定量的電磁干擾。這主要是由轉換器內部電子元件的運行產生的,這些干擾如果未能有效遮罩,會在電波暗室中形成額外的底噪。
  • 設計與遮罩不充分:光電轉換器的設計與遮罩措施不充分,可能導致電磁干擾外泄。類似的問題還可能出現在光電轉換器的供電輸入部分,從而對電波暗室環境底噪造成影響。
  • 環境因素:外部環境,如溫度和濕度的變化會影響光電轉換器和光纖的性能。例如,高溫會增加電子元件的工作雜訊水準,導致電磁干擾增加。
  • 光纖連接處干擾:儘管光纖本身不產生電磁輻射,但光纖與轉換器的連接點可能成為干擾源。處理不當可能引入額外的電磁干擾。
  • 信號自身所寄生的高頻干擾:車上使用的各種通訊及信號(如乙太網通訊、CAN通訊、LIN通訊、PWM信號等),採用示波器來觀察電壓波形,可以看到波形的上升、下降速度是比較快的,一般情況下可以達到µs級別,甚至 ns 級別。這種快速變化的信號會寄生一部分電磁波高頻分量。這些高頻分量能顯著增加電波暗室的底噪水準,從而掩蓋產品在測試過程中的真實電磁干擾發射,使得無法準確測定樣品的真實干擾水準。針對這種情況,必須採取有效的濾波和信號處理措施。

 

為減少光電轉換器及信號寄生的高頻電磁波對電波暗室環境底噪的影響,可以採取以下措施:

 

1. 選擇高品質光電轉換器和遮罩措施

使用高信噪比、低電磁干擾的光電轉換器,並採取有效的遮罩措施,如採用遮罩盒、遮罩外殼等工具減少電磁干擾外泄。採用遮罩盒時,可以在遮罩盒上設計專門的電源供電轉介面、DB9轉介面、乙太網轉介面等,避免光電轉換器的供電線、信號線直接穿過遮罩盒,增加干擾外洩的可能。

 

如下示意圖是遮罩箱介面板的一些常用信號轉介面,在使用遮罩箱時,信號應盡可能經過轉介面再接到外部,以最大限度隔離訊號轉換器自帶的干擾經過線束輻射到電波暗室內。

 

 

2. 在光電轉換器信號輸出端加濾波

基於信號上升、下降沿時間較短(速度較快)而隨之帶來的高頻電磁波寄生成分的情況,針對光轉信號的輸出端(電波暗室內的光電轉換器端),可以加裝一些濾波電路,以抑制寄生的高頻分量干擾,從而降低底噪水準。為了滿足發射底噪的要求,在不影響通訊品質的前提下,不同的產品、不同的通訊鏈路所能匹配的濾波電路也不盡相同,濾波電路可能需要針對不同產品作出調整。

 

下面給出了LIN信號埠增加濾波電容後,LIN信號波形的變化情況。可以看出,並聯的電容值越大,LIN信號波形斜率越慢,但相應的LIN電壓波形變形也越嚴重,需要關注因此而帶來的信號品質下降。

 

LIN信號波形,未加濾波電容,總體圖                      LIN信號波形,未加濾波電容,上升沿_7.2µs

                   

 

LIN信號波形,並聯2.2nF電容,總體圖                     LIN信號波形,並聯2.2nF電容,上升沿_9.2µs

               

 

LIN信號波形,並聯10nF電容,總體圖                      LIN信號波形,並聯10nF電容,上升沿_25.6µs

            

 

下面給出了 LIN 信號埠增加濾波電容前後電磁輻射發射干擾的改善情況。可以看出,LIN信號鏈路在增加濾波電容後,電磁干擾在 150~300kHz 附近有著明顯的改善:

 

未加濾波電容                                並聯2.2nF電容,下降約5dB                     並聯10nF電容,下降約9dB

                                       

 

3. 對於高速CAN信號增加合適的匹配電阻

對於高速CAN信號,增加合適的匹配電阻也可以有效改善電磁輻射發射的干擾。

下面給出了高速CAN信號埠增加匹配終端電阻前後電磁輻射發射干擾的改善情況。可以看出,高速CAN信號鏈路在增加合適的匹配電阻後,電磁干擾有明顯的改善。

 

高速CAN信號鏈路,未加120匹配終端電阻                     高速CAN信號鏈路,增加120匹配終端電阻

                 

 

4. 對於帶PWM信號的產品減緩 PWM 斜率

對於帶PWM信號的產品,比如空調控制器、冷卻風扇、背光燈等,可以調整PWM信號的上升、下降沿來降低PWM信號帶來的底噪干擾,且相對於CAN/LIN通訊產品來說,這類產品對於斜率的調整敏感度比較低,所以在把斜率減得更加緩慢的情況下,大多數樣品也可以正常工作。

 

下面給出了減緩PWM斜率前後的波形圖和電磁輻射干擾圖。可以看出,減緩 PWM 的斜率後,在 150kHz 以下的頻段,電磁輻射干擾得到有效改善:

 

PWM波形圖,總體圖

(藍色:未減緩的波形;紅色:減緩後的波形)

 

PWM波形圖,細節圖

(藍色:未減緩的波形;紅色:減緩後的波形)

 

電磁輻射發射 – 斜率減緩前                                                          電磁輻射發射 – 斜率減緩後

                                     

 

5. 優化光纖連接點

另外,優化光纖連接點也有助於改善光電轉換器所帶來的干擾:在光纖連接部位採取嚴格的連接處理,避免鬆動和接觸不良。在可能的情況下,使用專門設計的連接器,並定期檢查和維護連接狀態,確保其穩定性和可靠性。光纖頭的透光性也需要定期檢查,如果透光性不好,需要使用專門的工具對光纖頭進行打磨,確保光纖狀態良好。

 

信號光電轉換器在汽車電子EMC測試中是很常見的,但其在轉換過程中產生的電磁干擾可能會對電波暗室環境的底噪水準造成影響,從而影響測試結果的準確性。通過選擇高品質的轉換器,採用適當的遮罩處理、信號處理和濾波措施等,可以進一步降低光電轉換器和信號所帶來的電磁干擾,改善電磁輻射發射的電波暗室底噪環境。未來,隨著光電轉換信號技術和EMC測試技術的持續發展,預期將有更多的創新和技術改進,為汽車電子產品的開發和驗證提供更加堅實的支援,確保車輛電子系統的安全性和可靠性。

 

作為一家擁有150多年經驗的檢測認證機構,TÜV萊因始終保持在汽車領域的領先性,憑藉其在汽車零部件檢測領域的專業團隊和技術優勢,得到了國內外主流車企的充分認可。截至目前,TÜV萊因汽車電子EMC實驗室已獲得德國大眾、德國寶馬、美國通用汽車、Stellantis 集團、現代汽車、馬自達汽車、富豪汽車、東風日產、一汽集團、長安汽車、吉利汽車、上汽集團、廣汽集團、賽力斯、長城汽車、福田汽車、東風嵐圖、零跑汽車、北京汽車、奇瑞商用車等30多家國內外知名車企的認可。此外,汽車零部件環境可靠性實驗室也先後獲得德國大眾、德國寶馬、北京賓士、上汽集團等眾多國內外整車企業的認可。

 

進一步相關資訊請洽詢德國萊因交通服務部門 / Peter Lee (email : PeterCY.Lee@tuv.com)

電子業RBA標準,你該瞭解的台灣環境法規

 

A. 台灣電子業從代工配角到研發核心,靠的不只是技術

台灣電子科技產業發達,源自於1950 ~ 1960年代,產業初期主要以電子零件代工及組裝為主,如收音機、電視機等電子產品。隨技術及產品需求提升,台灣開始跨足印刷電路板PCB製造,並廣泛應用於工業系統、通訊設備及汽車工業上,PCB的生產為台灣電子產品供應鏈墊下厚實的基礎。到了1970 ~ 1980年代,工業技術研究院(ITRI)及新竹科學園區陸續成立,發展重點轉移至半導體人才培育及推動技術轉移,而30年後的今天,台灣擁有多家重量級半導體製造及研發公司,同時是全球知名企業的上游供應商,受到眾多品牌商的「肯定」,更是全球電子供應鏈不可或缺的重要角色。

 

您是否好奇台灣電子業被「肯定」僅是因為技術嗎?企業之間的合作信任,是否就如同人與人之間的信任關係,需要長期累積與實踐?

 

我們觀察到這份信任的背後,除了穩健的技術實力,還有企業「負責任」的經營準則。台灣多數電子產業公司都取得「RBA認證」,而「RBA行為準則」如何成為企業助力,其中所涵蓋的環境面向,又如何與「台灣環境法規」相互對應與落實?讓我們進一步剖析其架構與影響力。

RBA (Responsible Business Alliance) 責任商業聯盟前身為電子產業行動聯盟 (EICC, Electronic Industry Citizenship Coalition) 成立於2004年,目標係推動負責任的商業行為,為供應鏈中存在的不公平待遇、勞工剝削及環境破壞等問題提供標準化的指引與解決方案。RBA行為準則 (RBA Code of Conduct) 關注的主題涵蓋五大面向:

• 勞工

• 健康與安全

• 環境

• 倫理

• 管理系統

適用的產業包含電子業、汽車業等,會員涵蓋製造商、品牌商及供應商,目前成員已超過600家跨國企業。

台灣德國萊因TUV Rheinland作為第三方認證機構,具備豐富的查證、驗證及稽核經驗,多年前即得到RBA官方授權認可的第三方稽核執行單位,我們有經驗豐富的稽核團隊可以為您的事業提供稽核服務,針對企業中的「勞工權益」、「健康安全管理」、「環境影響」、「商業道德」及「管理系統」的程序文件、評估數據及執行方式是否符合「RBA行為準則」要求。

 

B. RBA行為準則「C. 環境」與台灣「環境法規」的深度剖析

在各位讀者瞭解「RBA行為準則」的基本框架後,本期將為您深度剖析「RBA行為準則」中「C. 環境」與「台灣環境法規」間的關係。

Part 1:

RBA行為準則中,組織應體認「C. 環境」責任,是生產世界一流產品的重要因素,倡議者應辨識環境影響並在其生產經營過程中,盡量減少對社區、環境及自然資源的不利影響,同時保障公眾的健康和安全。然而,環境的面向很廣,故RBA行為準則將「C. 環境」分為七大議題,包含:

C1. 環境許可及報告

C2. 有害物質

C3. 固體廢棄物

C4. 廢氣排放

C5. 水源管理

C6. 能源消耗與溫室氣體排放

C.M 環境管理系統

這些子項構成了企業環境責任的核心實踐方向。

而台灣「環境工程」領域中,常以污染介質作為分類的基準,我們常透過新聞媒體,看到如「空氣及噪音」、「廢(污)水」、「廢棄物」、「土壤」、「毒化物」及「飲用水」污染等議題,而各地方環保局也常態性設有「空噪科」、「土水科」、「廢管科」等專責科室,處理各介質相關的環保議題,而「毒化物」及「飲用水」則因規模較小,故依照各地方環保局組織規劃,區分至「土水科」或「環境衛生科」轄下。另近年來「氣候變遷」議題也成為環保業界一大業務範圍,故地方環保局多設有「氣候變遷因應科」或「氣候變遷管理科」,負責氣候變遷或推動淨零轉型等相關業務。

看到這裡,您是否開始思考「RBA行為準則分類」跟「各地方環保局的業務區分」好像有點關聯,但這似有若無的感覺,要怎麼樣才能串聯彼此呢?

接著,我們將從「RBA行為準則分類」落地到「台灣環境法規」,梳理兩者之間的對應與關聯。

 

以下我們將以「RBA行為準則」為基礎,彙整對照「台灣環境法規」及「地方執行機關」間的關係:

項次 RBA 行為準則
「C. 環境」分類
台灣環境相關法規 地方執行/審查機關
1 C1. Environmental Permits and Reporting
環境許可及報告
• 工廠管理輔導法
• 工廠管理輔導法施行細則
• 工廠危險物品申報辦法
• 各地方政府地政局、經濟發展局、環境保護局及消防局
2 C2. Hazardous Substances
有害物質
• 毒性及關注化學物質管理法
• 毒性及關注化學物質管理法施行細則
• 危害性化學品標示及通識規則
• 各地方政府環境保護局
3 C3. Solid Waste
固體廢棄物
• 廢棄物清理法
• 廢棄物清理法施行細則
• 事業廢棄物貯存清除處理方法及設施標準
• 事業委託清理之相當注意義務認定準則
• 各地方政府環境保護局
4 C4. Air Emissions
廢氣排放
• 空氣污染防制法
• 空氣污染防制法施行細則
• 固定污染源有害空氣污染物排放標準
• 第一批至第八批公私場所應申請設置、
變更及操作許可之固定污染源
• 揮發性有機物空氣污染管制及排放標準
• 移動污染源空氣污染物排放標準
• 揮發性有機物空氣污染管制及排放標準
• 噪音管制法
• 噪音管制法施行細則
• 噪音管制標準
• 各地方政府環境保護局
5 C5. Water Management
水管理
• 水污染防治法
• 水污染防治法施行細則
• 放流水標準
• 水污染防治措施及檢測申報管理辦法
• 各地方政府環境保護局
6 C6. Energy Consumption and Greenhouse Gas Emissions
能源消耗與溫室氣體排放
• ISO 50001
• ISO 14064-1
–
7 C.M 環境管理系統 • ISO 14001 –

 

Part 2:

進一步,我們想跟您分享「RBA行為準則」的條文,與「台灣環境法規」條文的關係,以下我們將以「C1. Environmental Permits and Reporting 環境許可及報告」為例說明。

RBA 行為準則
「C1. Environmental Permits and Reporting 環境許可及報告」條文
台灣環境法規條文 重點提示
-C1.1 Policy: Ensure the facility’s environmental policy includes environmental permits and reporting elements.
政策:確保工廠的環境政策包括環境許可證及其計畫書要素
《工廠管理輔導法》第14條:
-工廠有以下情形者,不得取得設立許可或變更設立許可:依環境影響評估法規定應實施環境影響評估,其相關環境影響說明書或環境影響評估報告書未經環境保護主管機關核准。
若工廠設立達一定規模,未經環評不得設立
《工廠管理輔導法》第15條:
-工廠有以下情形者,不得辦理登記或變更登記:屬環境保護主管機關指定之事業種類、範圍及規模,其相關環境影響說明書、環境影響評估報告書或污染防治計畫未經環境保護主管機關核准或同意。
若工廠設立達一定規模,未經環評不得登記
-C1.2 Procedures & Practices
制定程序及作法
《工廠管理輔導法》第23條:
-工廠使用經各目的事業主管機關核准或許可再利用之易燃性廢棄物為原料從事製造、加工者,應按月向直轄市、縣(市)主管機關申報該廢棄物之種類及原料儲存量。
 

定期申報

-C1.3 Controls & Monitoring
控制和監控
 
-C1.4 Records are maintained
保存的紀錄
 

 

以上,我們為您介紹了「RBA行為準則」的來源及基礎架構,並深入內容探討「C. 環境」面向中,「C1. Environmental Permits and Reporting 環境許可及報告」與「台灣環境法規」的關係。

在下一期(2025 Q3),我們將從另一種角度出發,彙整「C2. Hazardous Substances 有害物質」至「C.M 環境管理系統」的要點,持續為您帶來最新的法規綜整,請拭目以待。

 

第二屆TÜV萊因認證節盛大登場,邀您共赴品質與未來之約

第二屆TÜV萊因認證節正式拉開帷幕,誠邀您共同參與!今年6月9日是第十八個“世界認可日”,值此檢測檢驗認證(TIC)行業的共同節日,TÜV萊因將圍繞品質、人工智慧、可持續、創新四大核心內容,展開為期兩個月的系列活動,為行業與公眾帶來一場品質盛宴。

 

去年首屆TÜV萊因認證節的成功舉辦,為行業內外人士帶來了全新的體驗與收穫。該活動以推動各行業領域高品質發展為目標,為本地企業搭建專業交流平臺,以輕鬆的線上互動形式提升公眾對產品安全及認證標識的認知,説明他們在選擇產品時做出更明智的購買決策;同時,認證節也為員工創造了展示專業素能和增強使命感的舞臺。今年第二屆TÜV萊因認證節將延續這一理念,以更開放的姿態、更務實的行動,為產業可持續發展賦能,守護人們的品質生活,誠邀您共同參與!

 

Pick“小藍標”關鍵字,探尋品質密碼

自1872年成立以來,TÜV萊因檢測認證標識——“小藍標”已遍佈全球各個角落,深入人們的衣、食、住、行及商業領域的各個方面,成為高品質和安全性的代名詞。TÜV 萊因將線上上線下同步發起“ Pick ‘小藍標’關鍵字”活動,邀請用戶分享對日常生活用品最關注的方面,例如產品的安全性、耐用性、環保性、智慧化等。參與話題討論,即有機會贏取豐厚獎品。通過這一有趣的互動,用戶將深入瞭解更多TÜV萊因針對消費市場推出的創新服務,如個性化認證方案等,感受 “小藍標” 背後的專業守護與品質承諾。

分享你的好物標準拿好禮  :  https://www.facebook.com/share/p/1Rs8fphDKZ/

 

TÜV萊因認證節大使招募,員工成為品牌傳播先鋒

TÜV萊因始終認為,內部員工是品牌的堅實後盾,也是向外界傳遞品牌理念的重要橋樑。為此,TÜV萊因特別發起認證節大使招募活動,邀請內部員工成為認證節代言人。大使將通過分享TIC行業冷知識、解讀測試資料背後的含義、澄清公眾常見的誤區、闡釋認證標識背後所承載的深層含義等一系列科普行動,用熱情與專業向公眾傳遞TÜV萊因的價值觀與使命。

 

 

https://www.youtube.com/watch?v=ajAVKQJxWKU

 

聯動多方,共話行業發展

此外,TÜV 萊因將充分發揮自身行業領導者的優勢,聯動政府單位、協會機構、行業客戶、大眾媒體舉辦一系列豐富多樣的活動,包括高端論壇、實驗室開放日、認證里程碑等。這些活動將為合作夥伴及客戶搭建高效的互動溝通平臺,促進資訊共用與經驗交流,共同為產業的高品質發展盡一份心力。

 

誠摯邀請您關注和積極參與此次TÜV 萊因認證節,一起感受TÜV萊因的專業魅力,共同為產業的未來發展注入新的活力與動力,邁向更永續未來。

 

認證節宣導影片

 

敬請關注TÜV萊因官方社交媒體帳號,瞭解更多活動詳情,參與互動贏取驚喜好禮!

 

2025年6月國際市場准入資訊更新

資訊 / 電信 ITE / Telecom

Argentina 阿根廷

阿根廷ENACOM重新定義移動衛星頻譜
2025 年 4 月 30 日,阿根廷國家通信管理局 (ENACOM)通過第 640/2025 號決議重新定義了移動衛星頻譜,以減少對個人通信服務 (PCS) 的干擾。這一變化直接影響在阿根廷國家網路內運營的電信和衛星運營商。重新定義後的頻譜為:
– 1990-2025 MHz 用於地對空傳輸;
– 2170-2200 MHz 用於空對地傳輸。

On April 30, 2025, the Argentine National Communications Authority (ENACOM) redefined the mobile satellite spectrum through Resolution No. 640/2025 to reduce interference to personal communication services (PCS). This change directly affects telecommunications and satellite operators operating within the Argentine national network. The redefined spectrum is:
– 1990-2025 MHz for ground-to-space transmission;
– 2170-2200 MHz is used for air-to-ground transmission.

 

Australia 澳洲

澳洲重制2015年無線電通訊 (無線電控制模型) 類別授權

[法規草案] 2015 年無線電通訊 (無線電控制模型) 等級許可證 (RCM 等級許可證) 授權使用無線電通訊設備在規定條件下控制模型飛機、模型陸地船舶和模型船舶。該條約將於 2025 年 10 月 1 日到期。
ACMA 建議對其進行微調以重新制定,建議變更:
– 改進定義和交叉引用
– 明確頻率範圍和 EIRP 限制
– 遵守標準、設備規則和 EME 暴露限值
– 設定開始日期
– 對設備規則做出相應修改
諮詢截止日期為 2025 年 5 月 26 日。

The Radiocommunications (Radio-controlled Models) Class Licence 2015 (the RCM Class Licence) authorises the use of radiocommunications devices to control model aircraft, model landcraft and model watercraft under set conditions. It is due to sunset on 1 October 2025.
It is believed that the RCM Class Licence forms a useful part of regulatory framework, so ACMA proposed to remake it with minor changes.

Proposed changes to the RCM Class Licence:
– Improving definitions and cross-references
– Clarifying frequency ranges and EIRP limits
– Complying with standards, equipment rules and EME exposure limits
– Setting the commencement date
– Making consequential changes to the Equipment Rules
The consultation close date is 26 May 2025.

 

Bermuda 百慕達

自2025年2月14日起,僅在藍牙和/或Wi-Fi頻率下運行的無線電設備不再需要單獨申請型式核准

百慕達監管機構 (RA) 宣佈,自2025年2月14日起,僅在藍牙和/或Wi-Fi頻率下運行的無線電設備不再需要單獨申請型式核准。
製造商和進口商仍必須確保這些設備符合美國聯邦傳播委員會 (FCC)、加拿大創新、科學與經濟發展部 (ISED) 以及歐洲電信標準協會 (ETSI) 制定的技術和監管標準。

On February 14th, 2025, the Regulatory Authority of Bermuda has granted type approval for radio apparatus devices operating solely on Bluetooth and/or Wi-Fi radio frequencies (the frequency ranges and no more than the powers listed below)
Nevertheless, manufacturers and importers are responsible for ensuring that such devices fully comply with all applicable technical and regulatory standards established by the following governing bodies including markings/labels for lawful operation within Bermuda
• the Federal Communications Commission of the United States of America (FCC)
• the Canadian Standards Association International (ISED)
• the United Kingdom/European Union (ETSI)

 

Brazil 巴西

巴西Anatel 批准簡化電信標準

[法規草案] 國家電信局於4月3日批准監管簡化項目,將對電信領域帶來重大監管改革。
該提案的主要目標之一是將規範性法案合併為單一法規,其中包括批准《電信服務通用條例》(RGST) 和《監管實驗環境條例》,更新《調頻臨時使用條例》,以及調整內部標準。該計畫旨在廢除過時的標準,更新集體利益服務和限制利益服務的定義和規則,並創建統一的詞彙表以促進對標準的理解。

The National Telecommunications Agency approved the Regulatory Simplification project on April 03, which brings about a significant regulatory reform in the telecommunications sector.
One of the main objectives of the proposal is to consolidate regulatory acts into a single regulation, which includes the approval of the General Regulation for Telecommunications Services (RGST) and the Regulatory Experimental Environment Regulation, the update of the Regulation for Temporary Use of Radio Frequencies, and adjustments to internal rules. The initiative aims to repeal obsolete rules and update definitions and rules for services of collective and restricted interest, in addition to creating a unified glossary to facilitate understanding of the rules.

 

Burkina Faso 布吉納法索

布吉納法索宣佈採用新的國家頻段分配計畫 (NFAP)

布吉納法索的電子通訊和郵政管理局 (ARCEP) 於 2025 年 1 月 9 日 宣佈採用新的國家頻段分配計畫 (NFAP),該計畫包括為 IMT 分配 6425-7125 MHz 頻段,以及為 5G 和下一代行動服務分配 3600-3800 MHz 頻段。
此外,ARCEP 於 2025 年 4 月 29 日 發佈了第 2025-011/ARCEP/CR 號決定,該決定定義了僅由低功率和短距離設備組成的網站類別及其使用條件。此決定涵蓋了用於 WAS/RLAN 的 5945-6425 MHz 頻段。

The Autorité de Regulation des Communications Électroniques et des Postes (ARCEP) announced the adoption of a new National Frequency Band Allocation Plan (NFAP) on January 9, 2025. This plan includes the allocation of the 6425-7125 MHz frequency band for IMT and the 3600-3800 MHz frequency band for 5G and next-generation mobile services.
Additionally, on April 29, 2025, ARCEP published Decision No. 2025-011/ARCEP/CR, which defines the categories and conditions for the use of stations exclusively composed of low-power and short-range devices. This decision includes the 5945-6425 MHz frequency band for WAS/RLAN use.

 

Chile 智利

智利SUBTEL修訂了短距離設備 (SRDs) 技術標準

智利Subsecretaría de Telecomunicaciones (SUBTEL) 於2025年5月22日發佈Resolución 737 Exenta,修訂了Resolución N°1985 Exenta de 2017短距離設備 (SRDs) 技術標準。
從2026年2月22日開始,SUBTEL將不再頒發低功耗器件 (lpd) 的批准證書,醫療產品除外。製造商或當地進口商必須在每個產品的包裝上附上QR碼 (最小尺寸為1釐米x 1釐米),而不是證書,這樣就可以進入一個西班牙語網站,上面有產品和製造商資訊、技術規格、測試報告和專門為智利法規起草的符合性聲明。
Resolución 737 Exenta將於2026年2月22日生效。

Subsecretaría de Telecomunicaciones (SUBTEL) in Chile published Resolución 737 Exenta on May 22, 2025, which modifies Resolución N° 1985 Exenta de 2017 on Technical standards for short range devices (SRDs). Beginning February 22, 2026, SUBTEL will no longer issue approval certificates for Low Power Devices (LPDs), with the exception of medical applications.. Instead of a certificate, manufacturers or local importers must include a QR code (minimum size 1 cm x 1cm ) on the packaging of every product which leads to a Spanish language website featuring product and manufacturer information, technical specifications, test report(s) and a declaration of conformity specifically drafted for Chilean regulations.
Resolución 737 Exenta will come into effect on February 22, 2026.

 

China 中國

工業和資訊化部關於廢止40-50吉赫茲 (GHz) 頻段頻率使用有關的兩部規範性檔

工業和資訊化部決定廢止《工業和資訊化部關於發佈40-50吉赫茲 (GHz) 頻段固定業務中點對點無線接入系統頻率使用事宜的通知》(工信部無〔2013〕500號) 和《工業和資訊化部關於發佈40-50吉赫茲 (GHz) 頻段移動業務中寬頻無線接入系統頻率使用事宜的通知》(工信部無〔2013〕502號)。
自本通知施行之日起,各級無線電管理機構不再受理和審批使用40-50吉赫茲 (GHz) 頻段固定業務中點對點無線接入系統、移動業務中寬頻無線接入系統設備的無線電發射設備型號核准以及新的頻率使用許可,已依法設置、使用的無線電臺可以使用至報廢為止。
本通知自2026年1月1日起施行。

MIT has decided to cease two notifications about 40GHz -50GHz:
– MIIT Notification No.(2013)500
– MIIT Notification No.(2013)502
From the date of implementation of this notice, radio management agencies at all levels will no longer accept and approve the use of 40-50 GHz frequency band point-to-point wireless access systems in fixed services and broadband wireless access systems in mobile services. Approval of radio transmission equipment models and new frequency use licenses, radio stations that have been set up and used in accordance with the law can be used until they are scrapped.
This notice shall take effect on January 1, 2026.

 

Ghana 迦納

迦納國更新國家頻率分配表 (NFAT)

2024 迦納國家通信管理局 (NCA) 於2025年4月更新了國家頻率分配表 (NFAT) 2024。

The Ghana National Communications Authority (NCA) updated the National Frequency Allocation Table (NFAT) 2024 in April 2025.

 

India 印度

印度國家通訊安全中心(NCCS) 發佈物聯網終端設備的印度電信安全保證要求(ITSAR)

印度國家通訊安全中心 (NCCS) 於 2025 年 4 月 21 日發佈了以下印度電信安全保障要求 (ITSAR)
• ITSAR309062504 – 智慧攝影機
• ITSAR309052504 – 智慧電錶
ITSAR309072504 – 車輛追蹤設備
• ITSAR702052504 – 第五類設備Two ITSARs (OLT and ONT)
• ITSAR702042504 – 第四類設備Four ITSARs (Wi-Fi CPE, IP Router, CBC and PABX)
• ITSAR702012504 – 第一類設備ITSARs of 23 No.s of 5G Core NFs (AMF, AuSF, NWDAF, NEF, NRF, N3IWF, SEPP, SCP, SMF, UDM, UPF, BSF, CHF, LMF/GMLC, SMSF, UDR, UDSF, EIR, NSACF, UCMF, AF, NSSF, PCF)
• ITSAR309042504 – 回饋設備
針對這些新的 ITSAR 標準,既不需要 VSC 核准,也不需要強制性的 NCCS 核准。印度國家通訊安全中心(NCCS) 發佈物聯網終端設備的印度電信安全保證要求(ITSAR) “印度國家通訊安全中心 (NCCS) 於 2025 年 4 月 21 日發佈了以下印度電信安全保障要求 (ITSAR)
• ITSAR309062504 – 智慧攝影機
• ITSAR309052504 – 智慧電錶
ITSAR309072504 – 車輛追蹤設備
• ITSAR702052504 – 第五類設備Two ITSARs (OLT and ONT)
• ITSAR702042504 – 第四類設備Four ITSARs (Wi-Fi CPE, IP Router, CBC and PABX)
• ITSAR702012504 – 第一類設備ITSARs of 23 No.s of 5G Core NFs (AMF, AuSF, NWDAF, NEF, NRF, N3IWF, SEPP, SCP, SMF, UDM, UPF, BSF, CHF, LMF/GMLC, SMSF, UDR, UDSF, EIR, NSACF, UCMF, AF, NSSF, PCF)
• ITSAR309042504 – 回饋設備
針對這些新的 ITSAR 標準,既不需要 VSC 核准,也不需要強制性的 NCCS 核准。

The National Center for Communication Security (NCCS) of India published the following Indian Telecom Security Assurance Requirements (ITSARs) on April 21, 2025:
• ITSAR309062504 – Smart Camera
• ITSAR309052504 – Smart Electricity Meter
• ITSAR309072504 – Vehicle Tracking Device
• ITSAR702052504 – Group-V Devices( Two ITSARs (OLT and ONT))
• ITSAR702042504 – Group-IV Devices( Four ITSARs (Wi-Fi CPE, IP Router, CBC and PABX)
• ITSAR702012504 – Group-I Devices (ITSARs of 23 No.s of 5G Core NFs (AMF, AuSF, NWDAF, NEF, NRF, N3IWF, SEPP, SCP, SMF, UDM, UPF, BSF, CHF, LMF/GMLC, SMSF, UDR, UDSF, EIR, NSACF, UCMF, AF, NSSF, PCF))
• ITSAR309042504 – Feedback Device
For these new ITSAR standards, neither VSC nor mandatory NCCS approval is required.

 

Indonesia 印尼

DJID發佈法規對GSM和IMT-2000移動設備的技術標準進行更新

印尼通信與數位部(DJID)發佈了《通信與數位部長令2025年第45號》,對GSM和IMT-2000移動設備的技術標準進行了更新。根據新法規,850 MHz頻段將用於GSM (如下表),同時該法規還規定了GSM和IMT-2000技術中的頻率範圍和模式。參考PERDIRJEN SDPPI No. 5發佈的測試報告仍然可以使用,只要它們不與技術標準中的規定相衝突。該法規將於2025年8月18日起正式生效。

Kementerian Komunikasi dan Digital (Komdigi) of Indonesia issued Decree No. 45 of 2025 concerning Technical Standards for Telecommunication Equipment and/or Cellular Mobile Telecommunication Devices Based on Global System for Mobile Communications and International Mobile Telecommunications-2000 Technology Standards. Updates to the Technical Standards include an additional 850 MHz frequency band for GSM. Test reports issued referencing PERDIRJEN SDPPI No. 5 may still be used provided they do not conflict with the provisions laid out in the Technical Standards. The Decree will come into effect on August 18, 2025.

 

Japan 日本

日本發佈關於在衛星NB-IoT上相容3GPP標準的無線電設備的通知

[法規草案] 日本向WTO提交了一份關於在衛星NB-IoT上相容3GPP標準的無線電設備的通知,用於透過中繼Inmarsat衛星站進行通訊。
此次修訂的目的是根據國內外營運商的要求,在衛星NB-IoT上引入使用相容3GPP標準的Inmarsat衛星的Inmarsat IoT類系統。將制定有關使用與衛星NB (窄頻) -IoT 3GPP 標準相容的Inmarsat衛星的Inmarsat IoT類型系統的許可條件和技術標準等的規定。

Japan proposed a WTO notification about radio equipment compatible with 3GPP standards on satellite NB-IoT for communications by relaying Inmarsat satellite stations.
The objective of the amendment is to enable the introduction of Inmarsat IoT-type systems that use Inmarsat satellites compatible with 3GPP standards on satellite NB-IoT, based on requests from domestic and foreign operators. The regulations regarding the license conditions and the technical standards, etc. for the Inmarsat IoT-type systems, that use Inmarsat satellites compatible with the 3GPP standards on satellite NB (Narrow Band)-IoT, will be established.

 

New Zealand 紐西蘭

紐西蘭發佈關於提高外部電源供應器能源效率的文件

[法規草案] WTO於2025年4月9日通報了一份關於紐西蘭外部電源供應器的文件。
針對外部電源供應器 (EPS) 提出的政策選擇將提高其能源效率並確保低效產品不會在紐西蘭供應。
通報的諮詢文件提出了以下政策選擇:
• 提高最低能源性能標準(MEPS)。
• 擴大所涵蓋的外部電源範圍。
• 參考國際測試標準。

On 09 April 2025, New Zealand published a WTO document about External power supplies.
The proposed policy options for External power supplies (EPS) for supply (sale, lease, hire, or hire-purchase) will improve their energy efficiency and ensure that inefficient products are not available for supply in New Zealand.
The notified consultation document presents policy options to:
• Increase the Minimum Energy Performance Standards (MEPS).
• Widen the scope of external power supplies covered.
• Reference international test standards.
Three MEPS levels are considered in the consultation document:
• International Efficiency Marking Protocol (IEMP) III (current MEPS)
• International Efficiency Marking Protocol (IEMP) VI
• US levels, proposed International Efficiency Marking Protocol (IEMP) VII
Widening the scope considered in the consultation document:
• Include USB Power Delivery devices which automatically change their output voltage depending on the External Power Supply end device.
The international test standards considered are:
• EN 50563:2011+A1:2013 External a.c. – d.c. and a.c. – a.c. power supplies – Determination of no-load power and average efficiency of active modes.
• United States Code of Federal Regulations, Title 10, Part 430, Subpart B, Appendix Z Uniform Test Method for Measuring the Energy Consumption of External Power Supplies.

 

New Zealand 紐西蘭

紐西蘭發佈關於提高三相電動機能源效率的文件

[法規草案] WTO於2025年4月9日發佈了一份關於紐西蘭三相電動機的文件。
針對三相電動馬達 (包括機器內的電動馬達) 提出的政策選擇將提高其能源效率並確保低效產品不會在紐西蘭供應。

On 09 April 2025, New Zealand published a WTO document about three phase electric motors.
The proposed policy options for three phase electric motors for supply (sale, lease, hire, or hire-purchase), including those contained within machines will improve their energy efficiency and ensure that inefficient products are not available for supply in New Zealand.
The notified consultation document presents policy options to:
• Increase the Minimum Energy Performance Standards (MEPS) to align with levels in the EU.
• Widen the scope of the regulations to cover smaller and larger motors.
• Introduce information disclosure requirements.
• Add in an additional international test Standard.Three MEPS levels and scope considered in the consultation document (using the IEC Efficiency Classes):
1. Introduce MEPS for small motors at IE2 levels, 0.12kW (inclusive) to less than 0.75kW.
• Increase MEPS for medium motors (already regulated) to IE3 levels, 0.75kW (inclusive) to less than 185kW.
• Introduce MEPS for large motors at IE3 levels, 185kW (inclusive) to less than 375kW.
2. After a period of 2 years increase MEPS for a range of motors to IE4, 75kW (inclusive) to 200kW (inclusive) in 2, 4 and 6 pole configurations.
The policy options propose introducing information requirements similar to those in EU 2019/1781, which requires certain information about the three phase electric motor to be visibly displayed on in the following places:
• technical data sheet or user manual supplied with the three phase electric motor, and
• manufacturers, importers, and authorised representative websites, and
• technical data sheet supplied with the product which contains a regulated three phase electric motor.
It is also proposed that the IEC 60034-2-1 (Edition 3):2024 Method 2-1-1B be added as a test standard to show compliance.

 

Malaysia 馬來西亞

馬來西亞通訊及多媒體委員會發佈最新許可指南

馬來西亞通訊及多媒體委員會 (MCMC) 在其官方網站上發佈了最新版授權指南 (更新指南),更新日期為 2025 年 4 月 15 日。
更新後的指南反映了對許可條例1的最新修訂,該修訂於 2025 年 4 月 15 日生效。

The Malaysian Communications and Multimedia Commission (“MCMC”) has published the latest edition of its Licensing Guidebook on its official website (“Updated Guidebook”), updated as of 15th April 2025.
The Updated Guidebook reflects the recent amendments made to Licensing Regulations1 which came into force on 15 April 2025.

 

Mauritania 茅利塔尼亞

茅利塔尼亞發佈最新的國家頻率分配表

茅利塔尼亞政府於2025年4月28日發佈了最新的國家頻率分配表。
L’Autorité de Régulation (ARE) of Mauritania published an updated National Frequency Allocation Table (NFAT) on April 28, 2025.

 

Niger 尼日

尼日ARCEP發佈新規定調整電子通訊產品認證要求

尼日電子通訊及郵政服務管理局 (ARCEP) 於2025年2月8日發佈了行政命令第00010/MCP/EN/SG/DL號,將新證書的有效期限從 10 年縮短至 3 年。 現有證書將一直有效,直至其原始到期日。 新證書的格式將會改變;將會記錄製造商、進口商詳細資料和頻率範圍等其他詳細資料。 未來也將開展當地測試。

On 18 February 2025, Niger ARCEP has reduced the validity of new certificates from 10 to 3 years.
Existing certificates remain valid until their original expiration dates.
Also “NEW” certificates will include additional details like manufacturer, importer information, and frequency range.
There are plans to implement local testing in future.

 

Paraguay 巴拉圭

巴拉圭 CONATEL 推出針對低功耗無線存取系統的 Resolución Directorio 1035/2025

巴拉圭國家電信委員會(CONATEL)於2025年4月23日發佈了第1035/2025號決議,制定了5.925 – 6.425 MHz頻段低功耗無線接取系統的技術法規。
禁止使用 6425–7125 MHz 頻段。因此,所有 Wi-Fi 6E 裝置都必須停用此子頻段。
對於已獲得批准的產品,製造商或進口商可以提交修改現有證書的請求,以包括Wi-Fi 6E功能。

The Comisión Nacional de Telecomunicaciones (CONATEL) of Paraguay issued Resolución Directorio 1035/2025 on April 23, 2025, which establishes the technical regulations for low-power wireless access systems in the 5.925 – 6.425 MHz band.
The use of the 6425–7125 MHz frequency band is prohibited. Therefore, all Wi-Fi 6E devices must have this sub-band disabled.
For already approved products, manufacturers or importers may submit a request to modify the existing certificate to include Wi-Fi 6E functionality.

 

Peru 祕魯

秘魯推動使用5G或更先進技術的公共電信服務

秘魯交通和通訊部 (MTC) 於2025年3月27日頒佈了第004-2025號最高法令,批准了第1627號立法法令的實施細則,推動使用5G或更先進技術的公共電信服務的部署。

The Ministerio de Transportes y Comunicaciones (MTC) of Peru issued Decreto Supremo N.° 004-2025-MTC on March 27, 2025, which approves the Regulations of Decreto Legislativo N° 1627, promoting the deployment of public telecommunications services using 5G or higher technology.

 

South Korea 韓國

韓國將擴大220V電壓標準容差

[法規草案] 2025年4月7日,貿易、工業和能源部 (MOTIE) 發佈了《電力事業法實施規則》部分修正案草案。
該修正案建議將220伏特標準電壓的允許電壓偏差從‘±13伏’改為‘±22伏’,以與國家標準保持一致。

On April 7, 2025, the Ministry of Trade, Industry and Energy (MOTIE) issued a draft partial amendment to revise Enforcement Rules of the Electric Utility Act.
This amendment proposes to change the allowable voltage deviation for the standard voltage of 220 Volts from ‘±13 Volts’ to ‘±22 Volts’ to align with the national standard.

 

South Africa 南非

南非發佈2025年國家調頻計畫 (NRFP) 草案

[法規草案] 南非獨立通訊管理局 (ICASA) 發佈了2025年國家調頻計畫 (NRFP) 草案,供公眾諮詢。該計畫概述了8.3 kHz至3000 GHz頻率範圍內無線電通訊服務的分配,以確保高效有效地利用無線電頻譜和軌道資源。

The Independent Communications Authority of South Africa has published the Draft National Radio Frequency Plan (NRFP) 2025 for public consultation. This plan outlines the allocation of radio communication services within the frequency range of 8.3 kHz to 3000 GHz to ensure the efficient and effective use of the radio frequency spectrum and orbital resources.

 

South Africa 南非

南非發佈創新頻譜頻率範圍 3800 – 4200 MHz 和 5925 – 6425 MHz 的動態頻譜存取和機會頻譜管理 (DSA) 條例草案

[法規草案] 南非獨立通訊管理局 (ICASA) 發佈了創新頻譜頻率範圍 3800 – 4200 MHz 和 5925 – 6425 MHz 的動態頻譜存取和機會頻譜管理 (DSA) 條例草案,供公眾諮詢。

The Independent Communications Authority of South Africa (ICASA) has published the Draft Regulations on Dynamic Spectrum Access and Opportunistic Spectrum Management (DSA) in the Innovation Spectrum Frequency Ranges 3800 – 4200 MHz and 5925 – 6425 MHz for public consultation.

 

UAE 阿拉伯聯合大公國

UAE即將變更 ECAS 與 EQM 證書型號表示規定

工業和先進技術部 (MOIAT) 在近期的阿拉伯聯合大公國國家機構 (NB) 會議中宣佈了 ECAS 和 EQM 認證流程的變更。帶有開放型號 (例如“*”或“X”) 的證書很快就會被視為不合規並被取消。
製造商必須確保符合性證明 (COC) 上列出的所有型號都是具體的,並能準確識別單一產品型號。
儘管尚未設定正式的最後期限,但 MOIAT 鼓勵立即遵守。

The Ministry of Industry and Advanced Technology (MOIAT) has announced changes to the ECAS and EQM certification processes. Certificates featuring open model numbers (e.g., “*” or “X”) will soon be deemed non-compliant and canceled.
Manufacturers must ensure that all listed models on Certificates of Conformity (COCs) are specific and accurately identify individual product models.
Although no official deadline has been set, MOIAT encourages immediate compliance.

 

Vietnam 越南

越南發佈第02/2025/TT-BKHCN號通函,關於71-76 GHz和81-86 GHz固定頻段營運的調頻頻道規劃

越南科技部發佈了第 02/2025/TT-BKHCN 號通函,題為「71-76 GHz 和 81-86 GHz 頻段固定業務調頻頻道分配規劃」。該法規管理這些特定頻段內用於固定服務的無線電頻道的分配,旨在優化高速點對點通訊系統,包括電信回程和微波網路。
本通函適用于越南境內從事調頻設備管理、使用或生產的組織和個人。該法於2025年5月15日起生效。

Vietnam’s Ministry of Science and Technology has issued Circular 02/2025/TT-BKHCN, titled “”Radio Frequency Channel Allocation Planning for Fixed Services in the 71-76 GHz and 81-86 GHz Bands.”” This regulation governs the allocation of radio frequency channels in these specific bands for fixed services, aiming to optimize high-speed, point-to-point communication systems, including telecommunication backhaul and microwave networks.
The Circular applies to organizations and individuals involved in the management, use, or production of radio frequency equipment within Vietnam. It will come into effect on May 15, 2025.

 

RoHS/REACH

China 中國

中國公告《電器電子產品有害物質限制使用標識要求》並自2025年4月1日起實施

工信部公告 SJ/T 11364-2024 《電器電子產品有害物質限制使用標識要求》行業標準。該標準於 2025 年 4 月 1 日實施。
該標準規定了電器電子產品中有害物質含有資訊的標識方法和要求,主要修改內容包括:新增4種有害物質,有害物質總數由6種增至10種;取消了生產日期的標注方式規定;引入了二維碼的標注方式和要求;增加了使用網頁作為展示媒介的要求;增加了有害物質含量資訊表的技術文檔保存要求。”

The Ministry of Industry and Information Technology of China issued SJ/T 11364-2024 “”Requirements for the Restriction of Hazardous Substances in Electronic and Electrical Products””.
The main amendments in SJ/T 11364-2024 include the addition of four new hazardous substances, increasing the total from six to ten, the removal of regulations regarding the display method of production dates, the introduction of QR code-based labeling methods and requirements, the addition of requirements for using web pages as display media, and the inclusion of technical documentation storage requirements for hazardous substance content information tables.

 

家用電器 House Appliances

Australia 澳洲

澳洲發佈洗碗機、洗衣機和烘乾機的新註冊要求

澳洲對洗碗機、洗衣機和烘乾機的測試和銷售標籤方式即將改變。
註冊人和供應商必須從 2025 年 10 月 4 日起 (新法規註冊 12 個月後) 開始採用新要求。具體變化包括:
– 洗碗機、洗衣機和烘乾機的測試和標籤要求
– 洗碗機和洗衣機的最低能源效率性能標準
供應商可以選擇立即採用新要求,或在註冊期間繼續銷售現有的註冊型號。

There are changes coming to how dishwashers, clothes washers and dryers are tested and labelled for sale in Australia.
The changes reflect recent advances, improved testing and new trends for these products and help promote energy efficient appliances that can reduce energy use, household bills and greenhouse gas emissions.
Registrants and suppliers must adopt the new requirements from Saturday 4 October 2025, 12 months since the new regulations were registered. The specific changes include new:
– testing and labelling requirements for dishwashers, clothes washers and dryers
– Minimum Energy Efficiency Performance Standards for dishwashers and clothes washers.
Suppliers can choose to adopt the new requirements now or continue to sell existing registered models for the duration of their registration.

 

Australia 澳洲

商用制冰機現在受設備能源效率 (E3) 計畫監管

2025年3月3日,《溫室氣體和能源最低標準》(GEMS) 商用制冰機2025年決議》在《聯邦立法公報》上登記。此前,能源與氣候變化部長理事會已于2024年1月達成協議,將對這些電器的能效進行監管。
該決議引入了商用制冰機的最低能效標準 (MEPS)。在發現制冰機的能耗和用水量顯著高於正常水準後,決定對其進行監管。
符合新要求的商用制冰機型號必須在2026年3月3日前註冊。供應商應確定其型號是否符合決議中的要求,並使用能效等級產品註冊系統將其納入範圍型號。

On 3 March 2025, the Greenhouse and Energy Minimum Standards (GEMS) Commercial Ice-makers Determination 2025 was registered on the Federal Register of Legislation. This follows an agreement by the Energy and Climate Change Ministerial Council to regulate these appliances for their energy efficiency in January 2024.
The determination introduces minimum energy performance standards (MEPS) for commercial ice-makers. The decision was made to regulate ice-makers after identifying that their energy and water use is significantly higher than it should be. Introducing MEPS will increase the:
– energy efficiency of ice-makers supplied in Australia
– help business save energy, reduce their operating costs, and reduce greenhouse emissions.
Commercial ice-maker models that meet the new requirements must be registered by 3 March 2026. Suppliers should determine if their models meet the requirements in the determination and register in scope models using the Energy Rating Product Registration system.

 

Brazil 巴西

Inmetro制定新規則,使冰箱的能源效率標籤更加高效

國家計量、品質和技術局 (Inmetro) 於2025年4月22日發佈第 223/2025 號法令,該法令修改了受 Inmetro 第 332/2021 號法令管制的冰箱及類似設備的合格評定要求。
主要更新內容是為門體上帶有制冰機和飲水機機型加入了特定的標準消耗曲線。

On 22 April 2025, the National Institute of Metrology, Quality and Technology (Inmetro) published Ordinance No. 223/2025, which changes the Conformity Assessment Requirements for refrigerators and similar equipment, regulated by Inmetro Ordinance No. 332/2021.
The main new feature published in the Official Gazette of the Union (DOU) is the inclusion of a specific standard consumption curve for models that have automatic ice (ice maker) and water and ice dispensers built into the door.
The measure adopted by Inmetro is fully aligned with successful international references and, at the same time, strengthens the Brazilian market for high-performance home appliances.
The new equation takes into account the specific characteristics of these models, making the comparison with other refrigerators fairer and more balanced.
Previously, models with automatic ice makers and water and ice dispensers on the door were assessed using the same formula as standard models – which resulted in a major technical barrier for the industry.
The measure improves the accuracy of energy labeling, provides better guidance to consumers and promotes fairer competition between manufacturers.

 

Chile 智利

智利發佈關於電視機的草案PE No. 8/1:2025

[法規草案] 智利發佈關於電視機的安全分析和/或測試協議的草案PE No. 8/1:2025。主要功能是播放電視節目 (音訊和視訊) 並具有內建調諧器的任何設備。 這包括使用以下顯示技術的電視:CRT、LCD、LCD-LED、OLED、QLED、QNED、Mini LED、AMOLED、ULED、NanoCell、Neo QLED 或類似技術。 包括對角線長度不超過 65 英吋的產品和帶有外部電源的產品。

Chile SEC published a draft about safety analysis and/or test protocol for electrical products PE No. 8/1:2025. The main concerned product is Television sets.
The notified Protocol establishes the safety certification procedure for the following electronic audio and video products:Television sets, defined as any equipment whose main function is to broadcast television programmes (audio and video) and which has a built-in tuner. This includes television sets that use the following display technologies: CRT, LCD, LCD-LED, OLED, QLED, QNED, Mini LED, AMOLED, ULED, NanoCell, Neo QLED or similar. Products with a diagonal measurement of 65″” or less and products with external power sources are included.Exceptions:• Products that operate at a voltage of up to 12 VDC and that do not have a voltage adapter to connect them to the AC power supply;• Products that operate at a voltage of up to 12 VDC and that have rechargeable batteries and a voltage adapter (AC to DC) to connect to the mains power supply;• PC monitors with a tuner, but whose main function is to display images from the PC.

 

India 印度

印度DPIIT修改《空調及其相關零件、全封閉壓縮機和溫度感測控制器 (品質控制) 修正令,2025 年》

DPIIT於2025年4月17日又更新一次2019年版QCO 至《the Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2025》。因公告日原因,豁免期也遞延至2026年4月17日。
針對空調和冷凍設備製造商,自2025年版修正案生效日一年之內,容量超過7000瓦 (2噸) 的密閉式壓縮機延長一年豁免直至2026年4月17日後再納入。

On 17 April 2025, DPIIT again updated the 2019 version QCO to 《the Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2025》. It shall be noted that nothing in this order shall apply to Hermetic Compressors of more than 7000 W (2TR) capacity for one year from the date of commencement of the Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2025 to the manufacturers of Air conditioning and Refrigeration equipment and related parts.

 

Indonesia 印度尼西亚

印尼發佈飲水機最低能源效率標準 (MEPS) 和能源效率標籤條例

2025年3月6日,印尼能源與礦產資源部發佈了第87/2025號能源與礦產資源部長條例,該條例涉及飲水機最低能源效率標準(MEPS)和能源效率標籤。
涵蓋兩類飲水機: 僅加熱型、加熱+製冷型 (熱泵或熱電製冷)
該法令已經於發佈日生效,並將在12個月後強制能源標籤。

Decree of the Minister of Energy and Mineral Resources Number 87.K/EK.01/MEM. E/2025 on Minimum Energy Performance Standards and Energy Saving Mark Labels for Energy Utilization Equipment for Drinking Water Dispensers was stipulated in Jakarta, March 6, 2025 and came into effect on the date set. And the EE label will be mandatory after 12 months.

 

Israel 以色列

以色列提議為強制性標準 SI 900 第 2.24 部分進行修訂,涉及冷凍設備、霜淇淋設備和制冰機

[法規草案] 以色列提議修訂強制性標準 SI 900 第 2.24 部分,涉及冷凍設備、霜淇淋設備和制冰機,並將其替換為 SI 60335 第 2.24 部分。擬生效日期尚待確定。

Israel proposed a revision of the Mandatory Standard SI 900 part 2.24, dealing with refrigerating appliances, ice-cream appliances and ice makers, to be replaced by SI 60335 part 2.24. his proposed Standard adopts both the International Standard IEC 60335-2-24 – Edition 8.0: 2020-09 and the American Standard UL 60335-2-24 – Second edition: April 28, 2017, and all its updates up until 27 February 2020, and allows for compliance with either. The major differences between the old standard and this proposed revision are due to the new editions of the adopted standards.
Proposed date of entry into force is to be determined. Generally, 60 days after publication in Israel Official Gazette, Section of Government Notices.Furthermore, both the old and the new proposed standards will apply from the date of entry into force for this revision for a transition period of two years. During this time, products are required to comply with either the old or the new standards.

 

Maldives 馬爾地夫

馬爾地夫發佈自願能效標籤計畫 (Hakathari Program),預計將於 2025 年引入強制性階段

馬爾地夫環境、氣候變化和技術部 (MECCT) 於2021年發佈了自願的馬爾地夫能效標籤計畫 (Hakathari Program),並預計將於 2025 年引入強制性階段。
覆蓋產品:
• 空調:單相分體式或整體式 (定速/變頻),製冷量≤7.1 kW (24,226 BTU/h)
• 冰箱:壓縮式直冷或風冷 (100-650升)
• 洗衣機:自動或半自動 (容量≤14 kg)

The Maldives Ministry of Environment, Climate Change and Technology (MECCT) launched the voluntary Maldives Energy Efficiency Labelling Scheme (Hakathari Program) in 2021 and is expected to introduce a mandatory phase in 2025.
Covered products:
• Air conditioners: single-phase split or packaged (fixed speed/inverter), cooling capacity ≤7.1 kW (24,226 BTU/h)
• Refrigerators: compression direct cooling or air cooling (100-650 liters)
• Washing machines: automatic or semi-automatic (capacity ≤14 kg)

 

Taiwan 台灣

經濟部能源署更新開飲機能源效率標示圖樣與使用期限規範

經濟部於2025年5月7日公告修正冰溫熱型及溫熱型開飲機相關法規,重點如下:
舊版標示圖可繼續使用至115年5月6日止,作為過渡期。
能源效率標示圖仍須張貼於說明書或產品本體明顯處,尺寸不變(如100x70mm)。
生效日: 即日起 (2025年5月7日) 生效。
需注意標示更新時程與產品文件調整。

MINISTRY OF ECONOMIC AFFAIRS Notice is hereby given, for the amendment on Paragraph 13 and Illustration 1 of Paragraph 6 of “Requirements on Minimum Energy Performance Standard, Energy Efficiency Rating Labelling and Inspection for Ice Warm Drink Dispenser” and Paragraph 13 and Illustration 1 of Paragraph 6 of “Requirements on Minimum Energy Performance Standard, Energy Efficiency Rating Labelling and Inspection for Warm Drink Dispenser

 

Taiwan 台灣

經濟部標準檢驗局公告修正「應施檢驗一般家用電器商品之相關檢驗規定」

經濟部標準檢驗局修正「應施檢驗一般家用電器商品之相關檢驗規定」,新增檢驗商品類別(共7項) 如具二次電池及 USB 埠之電捕昆蟲器(含捕蚊拍)、附汽車點煙器供電等產品; 具二次鋰系電池之商品需符合新增檢驗規定; 相關技術檔與測試資料(如注二) 須納入檢驗申請。
實施時程
– 修正後標準:自即日起適用。
– 舊制標準:適用至115年6月30日止。
商品檢驗標識與限用物質(RoHS)標示方式也同步說明與更新。

BUREAU OF STANDARDS, METROLOGY AND INSPECTION, MOEA Notice is hereby given, for the amendment of “”Legal Inspection Requirements for Household Electrical Appliances””
1. Seven New Product Categories Added to Mandatory Inspection – Includes items such as electric insect killers (e.g., mosquito swatters) equipped with secondary batteries and USB ports or car cigarette lighter adapters.
2. Additional Requirements for Products with Lithium-Based Secondary Batteries
Products containing lithium-based secondary batteries must comply with newly added inspection provisions, including submission of specific battery-related technical documents (as per Note 2).
3. Implementation Timeline: Revised standards: Effective immediately (April 24, 2025).
Previous standards: Valid until June 30, 2026.
4. Inspection Labeling and RoHS Substance Marking Requirements Updated
Includes instructions on how to indicate restricted substances and format for compliance marks (e.g., RoHS or RoHS(Pb).

 

Taiwan 台灣

經濟部預告修正「空氣清淨機容許耗用能源基準與能源效率分級標示事項、方法及檢查方式」

[法規草案] 經濟部發佈公告,預告「空氣清淨機容許耗用能源基準與能源效率分級標示事項、方法及檢查方式」第13點及第6點附圖1修正草案。
修正重點:
1. 新增條文第十三點 – 已核准登錄、使用舊版標示圖之產品,可於修正生效日起一年內繼續使用
2. 以及能源效率標示圖(附圖一)更新 – 修正圖示中的機關名稱與徽章;標示位置與尺寸維持不變。對公告內容有任何意見或修正建議者,請於本公告刊登公報隔日起14日內陳述意見或洽詢。

MINISTRY OF ECONOMIC AFFAIRS Notice is hereby given, to commence a period of public comments for the draft amendment on Paragraph 13 and Illustration 1 of Paragraph 6 of “Requirements on Minimum Energy Performance Standard, Energy Efficiency Rating Labelling and Inspection for Air Cleaners”. Any comments or suggestions regarding the content of this announcement should be submitted or inquired about within 14 days from the day following its publication in the official gazette.

 

Taiwan 台灣

經濟部預告修正「電鍋容許耗用能源基準與能源效率分級標示事項、方法及檢查方式」

[法規草案] 經濟部公告:預告「電鍋容許耗用能源基準與能源效率分級標示事項、方法及檢查方式」第13點及第6點附圖1修正草案。
修正重點:
1. 新增條文第十三點 – 已核准登錄、使用舊版標示圖之產品,可於修正生效日起一年內繼續使用
2. 以及能源效率標示圖(附圖一)更新 – 修正圖示中的機關名稱與徽章;標示位置與尺寸維持不變。對公告內容有任何意見或修正建議者,請於本公告刊登公報隔日起14日內陳述意見或洽詢。

MINISTRY OF ECONOMIC AFFAIRS Notice is hereby given, to commence a period of public comments for the draft amendment on Paragraph 13 and Illustration 1 of Paragraph 6 of “Requirements on Minimum Energy Performance Standard, Energy Efficiency Rating Labelling and Inspection for Electric Rice Cookers”. Any comments or suggestions regarding the content of this announcement should be submitted or inquired about within 14 days from the day following its publication in the official gazette.

 

Thailand 泰國

空調標準TIS 2134-2565 (2022)和冷熱及冷水飲水機安全標準TIS 2461-2565 (2022)將分別於2026.4.4和2025.10.1成為強制標準

泰國標準局TISI於2025年4月24日將製冷不超過12000W的空調能效標準TIS 2134-2565 (2022)和冷熱及冷水飲水機安全標準TIS 2461-2565 (2022)加入TISI強制標準清單,強制日期分別為2026年4月4號和2025年10月1號。TIS 2134-2565 (2565)是對原TIS 2134-2553 (2010)標準升級。

On April 24, 2025, the Thai Bureau of Standards (TISI) added the air conditioner standard TIS 2134-2565 (2022) for cooling power not exceeding 12000W and the safety standard for hot and cold water dispensers TIS 2461-2565 (2022) to the TISI mandatory standards list, with mandatory dates of April 4, 2026 and October 1, 2025 respectively. TIS 2134-2565 (2565) is an upgrade of the original TIS 2134-2553 (2010) standard.

 

Ukraine 烏克蘭

「具有直接銷售功能的製冷設備的生態設計要求技術法規」將於2026年9月1日生效 2025年5月2日

烏克蘭通過內閣第512號決議「具有直接銷售功能的製冷設備的生態設計要求技術法規」。該決議於2025年5月8日發佈,並將於2026年9月1日生效。

Ukraine notifies the adoption of the Resolution of the Cabinet of Ministers of Ukraine No. 512
On Approval of the Technical Regulation on Ecodesign Requirements for Refrigerating Appliances with a Direct Sales Function” of 02 May 2025. The Resolution was published on 08 May 2025 and will enter into force on 01 September 2026.The Resolution also establishes that the placing on the market and/or use of refrigeration appliances with a direct sales function, which were put into circulation before the entry into force of this Resolution, may not be prohibited or restricted due to non-compliance with the requirements of the Technical Regulations approved by this Resolution.

 

其他 / 多主題產品
Others / Products with Multiple Subjects

China 中國

中國發佈防火監控報警插座與開關徵求意見稿

[法規草案] 本文件規定了火災監控警報插座和開關的術語和定義、分類、技術要求、試驗方法、檢驗規則及標誌。本標準適用於額定電壓不超過440V交流、具有火災監控、警報功能的電源插座及開關。

China released draft for electrical receptacles and switches with fire monitoring and alarm function.
This document specifies the terminology and definitions, classification, technical requirements, test methods, inspection rules, and marking for fire monitoring and alarm sockets and switches. This document applies to power sockets and switches with a rated voltage not exceeding 440 V AC that possess fire monitoring and alarm functions.

 

China 中國

中國新版電動汽車電池安全標準將於2026年7月1日生效

中國電動汽車電池安全強制性國家標準將於2026年7月1日生效。
據工業和資訊化部稱,該標準名為《電動汽車用動力蓄電池安全要求(GB38031-2025)》。
修訂內容包括更新電池熱擴散測試,進一步明確了溫度要求、觀察時間和車輛測試條件。
新增了底部衝擊測試,用於評估電池在底部受到衝擊時的保護能力。此外,還增加了快速充電迴圈後的安全測試,要求在300次快速充電迴圈後進行外部短路測試,確保電池不起火或爆炸。
修訂版明確指出,該標準適用於電動汽車動力電池,不包括非驅動電池。

An updated mandatory national standard on the safety of electric vehicle batteries in China is set to take effect on July 1, 2026.
The standard is titled “”Safety Requirements for Power Batteries Used in Electric Vehicles (GB38031-2025),”” according to the Ministry of Industry and Information Technology.
The revisions include updates to thermal diffusion testing of batteries, further clarifying the temperature requirements, observation time, and vehicle testing conditions.
A new bottom impact test has been introduced to assess the protective capabilities of the battery upon impact to its base. A new safety test following fast charging cycles has also been added, which requires external short circuit testing after 300 fast charge cycles, mandating no fire or explosion.
The revised version clearly states that the standard applies to power batteries for electric vehicles, excluding non-propulsion batteries.

 

China 中國

中國發佈關於加強電動自行車強制性國家標準實施促進新產品有序供應的意見之徵求意見稿

[法規草案] 強制性國家標準《電動自行車安全技術規範》(GB 17761-2024) (以下簡稱《技術規範》) 已於2024 年12 月31 日正式發佈,將於2025 年9 月1 日正式實施。
為推進《技術規範》實施,進一步規範電動自行車生產、銷售和使用管理,促進符合《技術規範》的產品有序供應,推動電動自行車安全隱患全鏈條整治行動走深走實,現提出關於加強電動自行車強制性國家標準實施促進新產品有序供應的意見之徵求意見稿。

The mandatory national standard “Technical Specifications for Safety of Electric Bicycles” (GB 17761-2024) (hereinafter referred to as the “Technical Specifications”) was officially released on December 31, 2024 and will be officially implemented on September 1, 2025. In order to promote the implementation of the “Technical Specifications”, further standardize the production, sales and use management of electric bicycles, promote the orderly supply of products that meet the “Technical Specifications”, and promote the full-chain rectification of safety hazards of electric bicycles, this draft for comments on strengthening the implementation of the mandatory national standards for electric bicycles and promoting the orderly supply of new products is now proposed.

 

China 中國

中國發佈關於發佈電動自行車強制性產品認證實施規則的公告

為強化電動自行車強制性產品認證管理,國家認監委對相關強制性產品認證實施規則進行修訂,現發佈《強制性產品認證實施規則 電動自行車》(CNCA-C11-16:2025),自發佈之日起實施。
相關指定認證機構應依據新版規則和已發佈的強制性產品認證通用實施規則要求,制定對應的認證實施細則,向國家認監委備案後方可按照新版規則實施認證及頒發證書。
已經頒發的有效強制性產品認證證書可繼續使用,認證證書轉換工作採取標準換版、產品變更、到期換證等自然過渡的方式完成。

In order to strengthen the management of compulsory product certification of electric bicycles, the National Certification and Accreditation Administration has revised the relevant compulsory product certification implementation rules and now publishes the “”Compulsory Product Certification Implementation Rules Electric Bicycles”” (CNCA-C11-16: 2025), which will be implemented from the date of publication.
The relevant designated certification bodies should formulate corresponding certification implementation rules in accordance with the new rules and the requirements of the published general implementation rules for compulsory product certification, and implement certification and issue certificates in accordance with the new rules after filing with the National Certification and Accreditation Administration.
The valid compulsory product certification certificates that have been issued can continue to be used, and the conversion of certification certificates is completed by natural transition methods such as standard version change, product change, and expiration renewal.

 

India 印度

印度DPIIT發佈90 項家電類產品須符合 IS 302 (第 1 部分):2024 / IEC 60335-1:2020標準並取得 ISI 認證

自 2026 年 3 月 19 日起生效 2025年5月19日,DPIIT發佈取代2024年版QCO的《Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025》。本命令適用于90項家用、商業或類似用途的電器,其額定電壓單相電器不超過250 V,其他電器(包括直流供電電器和電池供電電器)不超過480 V,符合IS 302 (第 1 部分):2024 / IEC 60335-1:2020標準並取得 ISI 認證,自 2026 年 3 月 19 日起生效。

On 19 May, 2025, DPIIT published the 《Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2025》, superseding the QCO of 2024. This new order will mandate ISI certification for a wide range of 90 product categories. It shall apply to all electrical appliance intended for household, commercial or similar application with rated voltage not exceeding 250 V for single-phase appliances and 480 V for other appliances including direct current supplied appliances and battery operated appliances.
All these products must comply with IS 302 (Part 1): 2024 / IEC 60335-1: 2020. The QCO will come into force on March 19, 2026.

 

South Korea 韓國

23項電器產品的安全標準內容正式修訂

韓國於2025年5月22日發佈第2025-088號正式公告,依據《電器與生活用品安全管理法》第5條第3項、第15條第4項及第23條第4項的規定,
公告修訂以下電器產品的安全標準內容。
一、修訂原因
為配合國際協議 (如WTO/TBT、IECEE),更新電器產品安全標準,使其與國際規範一致。
二、主要內容
1) 本次共修訂 23項電器產品的安全標準:如KC 60332-2-4/5/9/14/29/51/56/75/81/90/97/101/103、KC 60745-2-11/12、KC 60799、KC 60884-1、KC 60064、KC 60901、KC 60968、KC 61199、KC 61347-2-1/-2 2) 本公告自發布日起立即生效。
原有的安全標準 (即原版) 將與新標準並行適用至2026年5月22日為止 (過渡期一年)。

Official Announcement No. 2025-088
In accordance with Article 5, Paragraph 3; Article 15, Paragraph 4; and Article 23, Paragraph 4 of the Electrical Appliances and Consumer Products Safety Control Act, the safety standards for the following electrical products have been revised and are hereby announced.
Date of Announcement: May 22, 2025
Announcing Authority: Korean Agency for Technology and Standards (KATS)
1. Reason for Revision
To align with international agreements (such as WTO/TBT and IECEE), the safety standards for electrical products have been updated to comply with international norms.
2. Main Content
1) A total of 23 safety standards for electrical products have been revised, including the following standards:
KC 60335-2-4 / -2-5 / -2-9 / -2-14 / -2-29 / -2-51 / -2-56 / -2-75 / -2-81 / -2-90 / -2-97 / -2-101 / -2-103,
KC 60745-2-11 / -2-12, KC 60799, KC 60884-1, KC 60064, KC 60901, KC 60968, KC 61199, KC 61347-2-1 / -2-2. 2) This announcement shall take effect immediately upon its date of publication.
The existing safety standards (i.e., the original versions) will remain applicable alongside the new standards until May 22, 2026 (a one-year transition period).

 

UAE 阿拉伯聯合大公國

電動車與電動車充電器標準UAE.S 2698:2024自 2025 年 5 月 31 日起在UAE將被視為強制性技術標準

2024 年第 (50) 號決議涉及阿聯酋電動車技術要求 UAE.S 2698:2024,其中包括電動車充電器的標準,自 2025 年 5 月 31 日起在阿拉伯聯合大公國將被視為強制性技術標準。

The Resolution No. (50) of 2024 concerning the technical requirements for electric cars UAE.S 2698:2024, which includes EV charger’s standard shall be deemed a mandatory technical standard starting from 31st May 2025 in United Arab Emirates.

 

Taiwan 台灣

經濟部標準檢驗局修正「應施檢驗遙控無人機商品之相關檢驗規定」等84項規定,如 遙控無人機、石油製品、貯備型電熱水器、開飲機…等。

BUREAU OF STANDARDS, METROLOGY AND INSPECTION, MOEA Notice is hereby given, for the amendment of some 84 legal inspection requirements.

 

Thailand 泰國

多種產品的泰國工業強制標準將於今年生效

以下泰國工業強制標準將於今年生效:
– TIS 60335 第 2(23)-2564 部分 (2021):皮膚或頭髮護理:
2025 年 10 月 1 日
– TIS 60335 第 2(13)-2564 部分 (2021):最大油量不超過 5 公升的油炸鍋和煎鍋:2025 年 10 月 1 日
– TIS 1436 第 3 -2564 部分(2021):供普通人操作的配電板 (DBO):2025 年 10 月 1 日
– TIS 60335 第 2(25)–2565 部分 (2022):微波爐 (包括組合微波爐):2025 年 12 月 30 日
– TIS 866 第30(101)-2561部分 (2018):交流三相感應電動機的效率等級:2026年4月18日

Below Thai Industrial Standard will enter into force this year:
– TIS 60335 Part 2(23)-2564 (2021): skin or hair care: 1 October 2025
– TIS 60335 Part 2(13)-2564 (2021): deep fat fryers having a maximum quantity of oil not exceeding 5 l and frying pans: 1 October 2025
– TIS 1436 Part 3 – 2564 (2021): distribution boards intended to be operated by ordinary persons (DBO): 1 October 2025
– TIS 60335 Part 2(25)–2565 (2022): microwave ovens (including combination microwave ovens): 30 December 2025
-TIS 866 Part 30(101)-2561 (2018) : Efficiency classes of AC three phase induction motors: 18 April 2026

《斯德哥爾摩公約》Annex A新增三項物質

 

第十二屆《斯德哥爾摩公約》締約國大會決議,將MCCP, LCPFCAs, 以及Chlorpyrifos這三項物質加入到Annex A中。詳細內容如下:

MCCP (C14~C17)

限制要求: 禁止生產及使用

豁免:

應用領域
豁免期限/條件
PVC製品
5年(限建築用線纜、包裝用壓延薄膜、絕緣材料、礦用輸送帶)
黏合劑與密封劑
5年(含航太國防應用,如聚氨酯黏合劑、防篡改膩子)
金屬加工液
至2036年(限航太、國防、汽車等「重型」製程,需配套收集系統)
聚合物與橡膠替換零件
至2041年或設備壽命結束(適用汽車零件、醫療電子設備、航太國防產品 )

 

LCPFCAs (C9~C21, 目前REACH Annex XVII已限制C9~C14)

限制要求: 禁止使用

豁免:

應用領域
豁免期限/條件
半導體替換零件
自修正案生效起5年內,允許用於未涵蓋於其他豁免的替換零件
特定應用豁免期限 內燃機動力船舶的替換零件:至設備使用壽命結束或2041年(以較早者為準)
停產車型的汽車替換零件:同上期限

 

提案物質: Chlorpyrifos

提案內容: 禁止使用

豁免:用於相關植物保護用途

德國萊因TUV Rheinland能為您做什麼?

德國萊因TUV Rheinland擁有專業化學檢測實驗室,能夠提供範圍廣泛的分析服務,如:#RoHS 、#REACH、#塑化劑、#食品接觸容器、#阻燃劑、#美國各州優先化學物質 (CHCC) 、#PFAS、#紡織品、#化妝品、#合規性,並能依您的需求提供優惠費用以及最具效益的方案評估。

 

若有檢測需求, 歡迎與我們聯繫

聯絡人: Ms. Ada Tsao Ms. Kelly Lin
電話: (+886) 02-2172-1196 (+886) 02-2172-1249
Email: AdaHY.Tsao@tuv.com KellyYT.Lin@tuv.com

PFAS:EN 17681-1:2025 紡織品分析方法更新

 

全氟與多氟烷基物質(PFAS)被稱為「永久化學品」,因為它們極難在自然環境中分解,容易在水源、土壤、動植物及人體中累積,成為長期的環境污染物(Persistent Organic Pollutants, POPs)。為了保護人民眾健康,越來越多國家開始評估PFAS的風險性甚至已開始禁止限制使用PFAS此族群中的特定物質,例如PFOS / PFOA / PFHxS等等。

要檢測紡織及塗層相關產品是否含有PFAS,可以採用2022年版公布的測試方法EN 17681-1/-2:2022。該方法以甲醇萃取,並以 LC-MS/MS 或 GC-MS-EI/CI 進行定量。而現在有更新版本EN 17681-1:2025並對測試方法進行修訂。

新方法變更

兩版本方法皆是針對紡織相關產品。

EN 17681-1/-2:2022 主要萃取游離或鬆散結合的 PFAS,也就是說未涵蓋側鏈含氟聚合物 PFAS。新公告的方法(2025年版)採用鹼性水解,能夠打斷聚合物主鏈與含氟側鏈之間的共價鍵,產生更高濃度的 PFAS,從而更好地符合法規要求。當然,若材料未使用含氟產品,則不會檢出更高濃度的 PFAS。兩個版本的差異摘要如下:

項目
EN 17681-1/-2:2022
EN 17681-1:2025
標準適用範圍
紡織品、皮革
紡織品、皮革
主要萃取溶液
甲醇
甲醇+氫氧化鈉鹼性溶液
可檢測PFAS類型
游離型或鬆散結合型PFAS
游離型、鬆散結合型及側鏈含氟聚合物水解後釋放之PFAS
側鏈含氟聚合物檢出
幾乎無法檢出
可分解側鏈含氟聚合物並釋放FTOHs等降解產物
檢測靈敏度
僅針對易萃取PFAS,對聚合物檢出低
可顯著提升聚合物相關 PFAS(如 FTOHs)檢出量

 

德國萊因TUV Rheinland能為您做什麼?

德國萊因TUV Rheinland擁有專業化學檢測實驗室,能夠提供範圍廣泛的分析服務,如:#RoHS 、#REACH、#塑化劑、#食品接觸容器、#阻燃劑、#美國各州優先化學物質 (CHCC) 、#PFAS、#紡織品、#化妝品、#合規性,並能依您的需求提供優惠費用以及最具效益的方案評估。

若有檢測需求, 歡迎與我們聯繫

聯絡人: Ms. Ada Tsao Ms. Kelly Lin
電話: (+886) 02-2172-1196 (+886) 02-2172-1249
Email: AdaHY.Tsao@tuv.com KellyYT.Lin@tuv.com

從製氫到封存 德國萊因解析氫能全產業鏈驗證路徑

為響應《COP29氫能宣言》及台灣氫能戰略,德國萊因大中華區2025氫能系列活動於5月14日在台北舉行「氫能技術市場准入及永續安全應用全方位解析研討會」,活動吸引產官學研超過70 位代表參與,現場嘉賓橫跨經濟部標準檢驗局、能源署智庫工研院及資策會科法所等主管機關與智庫,以及台灣港務公司、國家海洋研究院、台灣中油、台電、台肥等公營及研究機構,還有法人機構金屬工業中心、車輛測試中心、塑膠工業中心等,以及法國 Total Energy 集團、台達電子公司、聯華氣體集團、華城電機、群翌能源公司等重量級企業,顯見產業對氫能議題的高度重視。

 

 

研討會首先由德國萊因工業服務及資訊安全事業群總經理高鴻鈞揭開序幕,他引用德國萊因完成的「台灣工業低碳氫產業經營挑戰研究」,提出七項加速推動的關鍵策略,包括:加速低碳氫的生產、政府主導落實國家氫能戰略、把握藍氫優勢的發展契機、以獎助機制促進健全氫能產業鏈、建立低碳氫認證機制創造獲利條件、強化安全風險管理取得公民信任、與國際合作氫谷驗證計畫等,為研討會定下清晰的主軸。

 

在首場技術分享中,高鴻鈞總經理介紹最新的「德國萊因TÜV 氫能價值鏈技術服務」與相關認證,如 TÜV Rheinland H2.22 製氫系統認證及 H2.23 H2-Ready 氫能承壓設備及部件適用性認證,並分享與台灣中油合作建置首座加氫站進展。他也特別提到歐盟氫谷成功經驗及六大成功原則,並邀請產官學界共同推動台灣氫谷研究計畫,成為當天的首個亮點。

 

 

隨後是本活動的重頭戲,氫能解決方案經理傅花寧主講「電解水製氫系統全球市場准入與 ISO 22734 標準」,深入解析電解水製氫系統認證的五大模組及主要涵蓋的五大歐盟指令,並進一步說明介紹 ISO 22734 標準系統的製氫系統零部件要求,解析水電解槽和材料的十多項性能測試,且分享數十項專案的成功案例,引發現場高度關注及廣泛討論互動。

 

 

在接下來的場次中,傅花寧經理也介紹「車載儲氫氣瓶UN R134型式認證」,介紹車載儲氫氣瓶的聯合國 ECE R134 series 02 法規演變,剖析儲氫系統的結構、分類、操作工況及型式試驗,並進一步說明車載儲氫氣瓶的火燒試驗的關鍵步驟、方法及案例,最後比對 ECE R134 series 02 與 GB/T 42612:2023 標準之間的差異,演講相當生動精彩。 第四場「中空試樣法的創新應用與實踐」傅花寧經理則深入淺出的講解臨氫材料測試技術新突破,受到與會者高度評價。

 

 

 

 

下午場由工業服務及資訊安全事業群資深專案經理黃思銘分享「氫氣系統安全性的基礎知識」,說明氫氣危害性及事故案例,並說明防爆電氣設設備在氫氣環境下的法規應用及技術要點。

 

 

第六場再次由高鴻鈞總經理講述「藍氫碳捕捉及地質碳封存場技術服務」,說明藍氫技術成熟、可大量產氫、藍氫成本低於綠氫、短期內快速減碳等四大優勢之外,並分享天然氣製氫(灰氫)的蒸汽甲烷重組 (SMR) 及碳捕捉工廠與地質碳封存場(藍氫)的危害風險評估服務及豐富實績。  台灣具備碳封存場雄厚潛力,他建議,環境部的《二氧化碳捕捉封存管理辦法》可仿效歐盟《2009/31/EC 地質碳封存指令》作法,強化二氧化碳洩漏危害風險評估要求。以德國萊因TÜV以在歐盟的 DETECT 專案為例,運用《2009/31/EC 指令》及《ISO 27914 : 2017 標準》,為歐盟建構地質碳封存場洩漏風險評估技術及八大工具,整合蓋岩層和封存系統完整性監測數據,實施全生命週期的安全風險管理,確保地質碳封存場對公眾及環境的安全及脫碳系統的有效性。

 

 

壓軸場次由能源環保處資產完整性管理部專案經理周曜碩主講「低碳氫認證服務」,除更新 TÜV H2.21 低碳氫與再生氫認證標準、認證流程、方法及實績等資訊之外,並特別介紹歐盟 CertifHy EU RFNBO (非生物源之再生能源) 認證制度,此為歐盟正式認可的氫能自願性認證體系,是氫能產品出口歐盟市場必備合規工具(尤其是對應 CBAM、ETS 政策) 。德國萊因TÜV身為歐盟 CertifHy EU RFNBO 於2025 年 3 月 24 日公布首批認證機構之一,承擔歐盟氫能及永續發展的關鍵角色。周曜碩經理進一步剖析了 CertifHy EU RFNBO 三大核心要求及認證的五大步驟,最後比較歐盟 CertifHy EU RFNBO 與TÜV Rheinland H2.21 的差異,並優化運用需求條件。

 

研討會在與會者熱烈參與中圓滿結束,德國萊因TÜV未來將持續投入氫能技術的各環節應用,包括製氫、儲氫、輸氫、加氫、工業用氫、交通用氫、發電用氫、民生用氫等階段,為台灣實地驗證氫能產業鏈的氫安全、氫脫碳及氫經濟的成效,並透過台中港區氫能產業鏈示範區開發計畫與全國各界攜手加速台灣低碳氫產業與國際接軌,逐步實現台灣2050年淨零目標及永續發展。

 

【沙烏地阿拉伯重大更新】TÜV 德國萊因獲得 SASO 通訊與資訊設備法規認證授權

我們很榮幸宣布,TÜV德國萊因現已獲得沙烏地阿拉伯標準、計量與品質組織(SASO,Saudi Standards, Metrology and Quality Organization)正式授權,可為輸往沙烏地阿拉伯的通信與資訊技術(CIT)設備提供測試與認證服務。

根據最新規定,所有受管制產品皆須透過 SABER 平台申請產品符合性證書PCoC( Product Conformity Certificate)以及出貨批次證書SC(Shipment Certificate)。

原先需經由 CST 平台辦理的沙烏地通信與資訊技術委員會(CITC)無線設備認證申請,現已統一改為透過 SABER 平台提交。

我們將確保符合SABER技術法規和CST (Communications, Space & Technology Commission) 標準的產品進入沙烏地阿拉伯市場。通過這一認證,我們簡化了進入沙烏地阿拉伯市場的流程,為廣大製造商和出口商開闢了更廣闊的市場空間。