德國萊因TÜV 認證 TÜV Rheinland Accreditation

Indonesia 印尼

印尼發布飲水機產品能源效率分級與標示法規

印尼能源與礦產資源部已頒布第 87.K/EK.01/MEM.E/2025 號部長令，規範飲水機產品之能源效率分級與標示要求。

依據第 95.K/EK.07/DJE/2025 號部長令，德國萊因TÜV 印尼公司獲指定為飲水機能源效率分級之認證機構與實驗室。

本規定適用於具備加熱功能之獨立式飲水機，或採用壓縮機或熱電系統進行加熱或冷卻之獨立式飲水機，且水箱容量不超過 20 公升者。

該法令已於 2025 年 3 月 6 日公告，並將於 12 個月後（2026 年 3 月 6 日）正式實施。

The Indonesia Ministry of Energy and Mineral Resources has issued Decree of the Minister of Energy and Mineral Resources no. 87.K/EK.01/MEM.E/2025 concerning Energy Efficiency Rate and Label for water dispenser products.
According to the Decree of the Minister of Energy and Mineral Resources no. 95.K/EK.07/DJE/2025, TUV Rheinland Indonesia is appointed as Certification Body and Laboratory for EER Water Dispenser.
This regulation is applicable for drinking water dispensers, which are stand-alone appliances equipped with heating function, or stand-alone appliances equipped with heating and/or cooling functions using compressor or thermoelectric system, utilizing bottled water as the water source with bottle capacity up to 20 liters.
The applicable water dispenser products operating with electrical power supply up to 230V AC under the following HS Codes:
a. HS 8516.10.11;
b. HS 8516.10.19;
c. HS 8418.69.30; and
d. HS 8418.69.90
or its amendment.
This decree was issued on 6 March 2025, and will be implemented 12 months afterwards (6 March 2026).

 

資訊／電信 ITE / Telecom

Australia澳洲

澳洲就無線寬頻服務與無線電高度計共存之額外保障措施展開公共諮詢

[法規草案] 澳洲 ACMA 發布諮詢文件：針對無線寬頻服務與無線電高度計共存之額外保障措施。

運作於 4200–4400 MHz 頻段的無線電高度計，與運作於 3700–4000 MHz 頻段的無線寬頻系統之間的臨時緩解措施，將於 2026 年 3 月到期。此外，澳洲民航安全局（CASA）亦正評估新的無線電高度計運作要求。

ACMA已考慮臨時緩解措施解除後的運作環境，並提出新的自願性保障措施，作為臨時措施結束後適用於無線寬頻服務之配套機制。

Consultation paper: Additional assurance measures for the coexistence of wireless broadband services and radio altimeters
The interim mitigations for coexistence between radio altimeters, operating in the 4200–4400 MHz band, and wireless broadband systems, operating in the 3700–4000 MHz band, will expire in March 2026. In addition, new radio altimeter operational requirements are being considered by the Civil Aviation Safety Authority (CASA).
ACMA has considered the operating environment after the interim mitigations are lifted and are proposing new voluntary assurance measures that will apply to wireless broadband services after the interim mitigations end.
Feedback is welcome by 5 pm (AEDT) on Friday 6 February 2026.

 

Brazil 巴西

巴西就電信產品 ANATEL 認證標識作業程序徵詢意見

[法規草案] 巴西國家電信管理局（ANATEL）已向世界貿易組織提交一份關於更新電信產品 ANATEL 認證標識之標示作業程序的意見徵詢文件。該文件已於 2020 年 7 月 31 日依第 4088 號法令核准。透過在認證標識及直接印刷、QR Code、電子標籤等標示方式中，導入更複雜的視覺元素、特殊油墨、加密資料及其他安全機制，旨在遏止詐欺行為，並防止未經檢測之設備流入國內市場。

預定通過日期：待定

預定生效日期：待定

Brazil ANATEL notified WTO a draft documennt about contributions for updating the operational procedure for marking the Anatel Homologation Identification on Telecommunications Products, approved by Act No. 4088, 31 July 2020.

The idea is to hinder the actions of fraudsters and prevent the entry of untested equipment into the country using more complex visual elements, special inks, encrypted data, and other security mechanisms in seals and other marking procedures, such as direct printing, QR codes, and electronic labels (e-labels).

Proposed date of adoption: To be determined

Proposed date of entry into force: To be determined

 

Brazil 巴西

巴西 ANATEL 更新無線電定位與無線電導航系統調頻技術與運作要求

巴西國家電信管理局（ANATEL）已更新無線電定位與無線電導航系統使用調頻之技術與運作要求。

本次修訂新增多項規範，包括海事雷達、氣象雷達系統、海上無線電導航雷達，以及用於追蹤太空飛行器與航空器之雷達系統的新頻率範圍、功率限制與頻寬規範。

這些更新符合國際標準，旨在確保頻譜的高效利用和各項業務間的相容性。

The Brazilian National Telecommunications Agency (ANATEL) updates technical and operational requirements for the use of radio frequencies by radiolocation and radionavigation systems.

It introduces new frequency ranges, power limits, and bandwidth specifications for oceanographic radars, weather radar systems, maritime radionavigation radars, and radar systems for tracking space launch and aeronautical vehicles.

These updates align with international standards and aim to ensure efficient spectrum use and compatibility between services.

 

India 印度

印度 WPC 發布《2025 年國家頻率分配計畫》（NFAP-2025）

印度無線規劃與協調局（WPC）發布《2025 年國家頻率分配計畫》（NFAP-2025），作為印度未來互聯互通發展的重要藍圖：

5G 擴展與新增 IMT 頻段

NFAP-2025 為 IMT-2020（5G）服務新增頻段（6425–7025 MHz、7025–7125 MHz），可提升頻譜容量，強化企業應用、工業物聯網及消費市場之發展潛力。

衛星服務發展

該計畫鼓勵於印度境內製造與部署：

• 高通量衛星（HTS）：涵蓋 Ka（5–40 GHz）、Q（30–50 GHz）及 V（40–75 GHz）頻段。
• 高空平台站（HAPS）：改善偏遠地區之網路連線能力。
• 優化饋線鏈路設計，以提升衛星寬頻效能。

物聯網與新興技術整合

新增頻譜分配支援短距離裝置（SRD）、超寬頻（UWB）及機器對機器（M2M）通訊，對於醫療植入設備、探地雷達及智慧物聯網生態系統發展至關重要。

頻譜協調與統一

加強對車聯網（V2X）技術、叢集通訊服務，以及公共安全與災害應變（PPDR）頻譜之協調管理，確保互通性與有效的緊急應變，並納入衛星通訊應用。

NFAP-2025 將印度定位在下一代連結技術的前沿，同時維持強大的頻譜治理架構。對於監管合規和產品認證領域的專業人士而言，亦為拓展新興技術專業知識的機會。

The Wireless Planning and Coordination (WPC) has released the much-awaited National Frequency Allocation Plan 2025 (NFAP-2025)—a roadmap for India’s connectivity landscape.

Key Highlights:

5G Expansion & New IMT Bands

NFAP-2025 introduces new frequency bands (6425–7025 MHz, 7025–7125 MHz) for IMT-2020 (5G) services. This will increase spectrum capacity and enable enhanced capabilities across enterprise, industrial IoT, and consumer sectors.

Satellite Services Growth

The plan encourages domestic manufacturing and deployment of:

• High Throughput Satellites (HTS): Ka (26.5–40 GHz), Q (30–50 GHz), and V (40–75 GHz) bands.
• High Altitude Platform Stations (HAPS): To improve connectivity in remote areas.
• Feeder link optimization for better satellite broadband performance.

IoT & Emerging Technology Integration

New spectrum allocations support Short-Range Devices (SRDs), Ultra-Wideband (UWB), and M2M communications, crucial for medical implants, ground-probing radars, and smart IoT ecosystems.

Harmonization & Coordination

Enhanced alignment for V2X technology, trunking services, and Public Protection & Disaster Relief (PPDR) spectrum ensures interoperability and effective emergency response, including satellite-based services.

NFAP-2025 positions India at the forefront of next-generation connectivity while maintaining strong spectrum governance. For professionals in regulatory compliance and product certification, this is a chance to expand expertise in emerging technologies.

 

India 印度

印度 NCCS 正式發布第二層與第三層區域網路交換器 ITSAR 要求 (印度電信安全保證要求)

印度國家通訊安全中心（NCCS）正式發布第二層與第三層區域網路交換器之 ITSAR（印度電信安全保證要求），此舉為強化電信與網路安全架構的重要里程碑。強制實施日期預計將於近期公布。我們鼓勵企業與製造商在 NCCS 正式公告前，先行審視相關技術與安全要求，並啟動合規準備工作。

The National Centre for Communication Security (NCCS) has officially issued the ITSAR (Indian Telecom Security Assurance Requirements) for Layer 2 and Layer 3 LAN Switches, marking a significant milestone in strengthening India’s telecom and network security framework.

While the mandatory implementation date is expected to be announced soon, organizations and manufacturers are encouraged to proactively review the requirements and begin preparedness activities ahead of the formal notification from NCCS.

 

India 印度

印度 NCCS 發布 PON ONT 認證通知，簡化 ONT 設備及客製化型號之測試與認證流程

國家通訊安全中心（NCCS）發布 PON ONT 認證相關通知，針對 ONT 設備及其客製化型號之測試與認證流程進行簡化，旨在減少重複作業，同時維持完善的安全保障機制。

主要亮點：

• 強制性安全測試：僅針對具獨特 SoC-SDK 組合之產品進行安全測試；若其他型號採用相同組合，則可自動取得認證。

• 符合性自我宣告（SDoC）：OEM 製造商須於申請過程中，依規定格式提交符合性自我宣告（SDoC），詳細說明所有型號之客製化內容及其軟體雜湊值。

• 新增型號機制：如需將採用相同 SoC-SDK 組合之新客製化型號納入既有證書，OEM 製造商須透過 MTCTE 入口網站申請證書變更，並提交更新後之 SDoC，涵蓋既有與新增型號。該變更可於無須額外測試之情況下核准。

• SoC 或 SDK 更新：依據安全認證程序第 7 節規定，對 SoC 或 SDK 的任何更新都將被視為軟體更新。

The National Centre for Communication Security (NCCS) has issued a notification on PON ONT certification after considering industry inputs. The testing and certification process for ONT devices and their customised variants has been streamlined to reduce duplication while maintaining strong security assurance.

Key highlights:

• Mandatory Security Testing: Security testing is required only for unique SoC–SDK combinations; additional variants using the same combination are automatically covered without separate testing.
• Self Declaration of Conformity (SDoC): A Self Declaration of Conformity (SDoC) detailing all variant customisations and their software hash values must be submitted during the application process as per the defined format.
• Adding New Variants: To add new customised variants with the same SoC–SDK combination to an existing certificate, OEMs must apply for certificate modification via the MTCTE portal and submit an updated SDoC (Annexure-I) covering both existing and new variants. The modification will be approved without any additional testing.
• SoC or SDK Updates: Any update to the SoC or SDK will be treated as a software update, in line with Section 7 of the Security Certification Procedure.

This approach simplifies compliance, speeds up approvals, and reduces testing overhead—while preserving security standards.

 

India 印度

印度 TEC 再次延後實施多項認證要求

2025 年 12 月 29 日，印度電信工程中心（TEC）發布三則通知，宣布延後多項認證要求之實施期限，重點如下：

– 繼 2025 年 6 月 26 日公告，將蜂巢式行動通訊基地台等四類產品可接受來自非邊境共享國家之 ILAC 測試報告期限延長至 2025 年 12 月 31 日後，現再度延長六個月至 2026 年 6 月 30 日。

– 同樣地，PON 系列寬頻設備之相關豁免期限，亦由 2025 年 12 月 31 日延長至 2026 年 6 月 30 日。

– 與上述情況類似，直放站（Repeater）、NB-IoT、5G FR2 等產品或特定技術參數之測試報告豁免期限，亦由 2025 年 12 月 31 日延長至 2026 年 6 月 30 日。

On December 29, 2025, the Telecom Engineering Centre of India (TEC) issued three notices to postpone the implementation of a series of certification requirements, the main contents of which are as follows:
– Following the notice on June 26, 2025 that the deadline for receiving ILAC test reports from non-border sharing countries for four types of products, including cellular network base stations, was extended to December 31, 2025, this time it was extended by half a year to June 30, 2026.
– Similar to the above, extend the PON Series broadband device exemption period from December 31, 2025 to June 30, 2026.
– Similar to the above, extend the reporting exemption for products such as repeaters, NB-IoT, 5G FR2, or specific parameters from December 31, 2025 to June 30, 2026.

 

India 印度

印度 NCCS 延長臨時證書的有效期限至 2 年

印度國家通訊安全中心（NCCS）發布通知，將臨時證書（Pro Tem Certificate）之有效期限，由現行 6 個月延長至 2 年。

India National Centre for Communication Security (NCCS) issued a Notification about extension of validity of Pro Tem certificate.
1. The competent authority has accorded approval for issuing Pro Tem certificates with a 2-year validity instead of current 6 months’ validity.
2. For Pro Tem Certificates issued after 05th December, 2025, the validity will be for 2 years.
3. For existing Pro Tem certificates, which are getting expired and if the applicants apply for their renewal on the MTCTE portal, then the renewed certificate will be issued with a validity of the remaining period of two years from the date of first issue of Pro Tem certificate.
4. All other terms and conditions will remain the same as per the notifications cited under references.
5. The policy of two-year validity period for Pro Tem certificates will be reassessed after one year.

 

India 印度

印度 BIS 延長 LED 模組標準 IS 16103:2025 升級截止期限

2026 年 1 月 1 日，BIS 公告將 LED IS 16103 (Part 1): 2012 標準升級至 IS 16103 (Part 1): 2025／IEC 62031:2018 之的LED module實施截止日期 2026 年 1 月 26 日，延長至 2026 年 7 月 21 日，以回應產業需求，提供製造商與進口商更充裕之轉換緩衝期。

此日期之後，BIS 將僅接受依 IS 16103 (Part 1): 2025 標準進行認證。

On January 1, 2026, BIS announced that the implementation date for upgrading the IS 16103 (Part 1):2012 standard to IS 16103 (Part 1):2025 / IEC 62031:2018 for LED modules, originally scheduled for January 26, 2026, would be postponed to July 21, 2026, in response to industry requirements and to provide a buffer for manufacturers and importers.
After this date, BIS will only accept certification based on the IS 16103 (Part 1):2025 standard.

 

India 印度

印度重工業部撤銷《2024 年機械與電氣設備安全（綜合技術法規）命令》

印度重工業部（MHI）於 2026 年 1 月 14 日發布 S.O. 239(E) 命令，正式撤銷先前於 2024 年公布之 S.O. 3649(E) Machinery and Electrical Equipment Safety (Omnibus Technical Regulation) Order, 2024，並即日生效。

MINISTRY OF HEAVY INDUSTRIES published order S.O. 239(E).

In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government being of the opinion that it is necessary so to do in the public interest, hereby rescinds the notification of the Government of India in the Ministry of Heavy industries issued vide number S.O. 3649(E), dated the 28th August, 2024, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii) relating to the Machinery and Electrical Equipment Safety (Omnibus Technical Regulation) Order, 2024, with immediate effect.

 

India 印度

MeitY 公布 CRS 計畫第 65 項 Extended Reality（XR）產品系列劃分原則

1) 產品類別區分與型號數量上限

• 分類原則：AR、VR 與 MR 產品須分別獨立組成各自系列，不得跨類別混合申請。
• 數量限制：每一系列最多可包含 10 個型號（1 Lead Model + up to 9 Series Models）。

2) 系列劃分條件：

I. 相同電源與防護：須採用相同電力來源（Adapter/Mains/Battery）及相同防護系統。電池容量可不同，但須以容量最大者作為送測樣品。

II. 相同結構與絕緣等級：所有型號之結構設計與絕緣等級須一致。

III. 相同外殼材質：必須使用相同材質，僅允許顏色或細微外觀造型之裝飾性差異。

IV. 相同 PCB 佈局：所有型號之電路板佈局設計須完全相同。

V. 相同顯示技術類型：顯示面板技術須一致（例如同為 LED/LCD/AMOLED等）。

VI. 相同 IP 等級：系列內產品之防塵防水（IP）等級須一致。

3) 標示要求：

若產品出貨時未隨附外部電源供應器，須於產品本體或產品型錄中清楚標示外部電源來源（如電源轉接器或行動電源等）之詳細規格與額定值。

請注意，XR 產品標準之過渡期即將結束。自 2026 年 5 月 1 日起，舊版 IS 13252 (Part 1): 2010 與 IS 616: 2017 將正式失效，屆時僅能依 IS／IEC 62368-1: 2023 進行認證。

Meity has announced the Series Guidelines for Extended Reality (XR) products (item 65) under the CRS scheme.
1) Product Category and Model Limit:
• Classification Principle: Same type of products may be clubbed together in a series (Separate series to be formed for AR product, VR Product and MR product).
• Model Limit: Maximum 10 models can be accommodated in a series (1 Lead Model + up to 9 Series Models).
2) Series Grouping Factors:
• I. Same energy source and safeguard system: Same energy source (Power Adapter, Mains Operated, Battery Operated) and safeguard system. Models with different battery capacities can come in series, provided the lead model is tested with the highest battery capacity.
• II. Same class of construction: Same class of construction.
• III. Same enclosure: Same enclosure (The same enclosure material must be used, with an exception for differences that are purely decorative (e.g., colour, minor styling variations).
• IV. Same PCB layout design: Same PCB layout design.
• V. Same type of Display: Same type of Display (LED/LCD/AMOLED etc).
• VI. Same IP Rating: Same IP Rating.
3) Marking Requirement: In cases where an external energy source is not supplied with the product, the specifications and ratings of the external energy source (e.g., power adapter, power bank, etc.) shall be clearly stated on the product/catalogue.
Please note: The period of concurrent running for standards IS 13252 : Part 1: 2010 and IS 616: 2017 with IS/IEC 62368 : Part 1 : 2023 shall be permitted until 1st May, 2026. After this date, only IS/IEC 62368-1 : 2023 shall be used for certification.

 

India 印度

印度標準局（BIS）於 2026 年 1 月 21 日公告，針對 CRS 計畫中適用 IS 302-1 之家電用適配器產品，原訂於 2026 年 2 月 23 日將標準升級至 IS 302 (Part 1): 2024／IEC 60335-1:2020 的實施日期，延後至 2027 年 2 月 23 日生效。

According to the BIS circular dated 21 January 2026, the last date of implementation of revised IS 302 (Part 1): 2024/IEC 60335-1:2020 for Adapters for Household and Similar Electrical Appliances has been extended till 23 February 2027. Other terms and conditions of circular ref IS 302 (Part 1) dated 27 November 2024 remains the same. This decision further extends the previous deadline of 23 February 2026.

 

Indonesia 印尼

印尼 KOMDIGI 發布修訂版 LTE 與 NR 標準

2025 年 12 月 19 日，印尼通訊與數位部（KOMDIGI）發布第 569/2025 號文件，修訂第 352/2024 號文件中有關 LTE 與 NR 產品之技術法規。修訂內容將於 2026 年 1 月 19 日生效。由於 B41／n41 為新法規中新增的頻段，已獲得認證的產品如需啟用該頻段則需重新認證。

On December 19, 2025, the Indonesian Ministry of Communication and Digital (KOMDIGI) issued Circular 569/2025 with amendments to Circular 352/2024 which is a technical regulation for LTE and NR products. The amendment will take effect on January 19, 2026. Since B41/n41 is an additional band in the new regulation, products that have already been certified will need to be recertified if they want to activate the band.

 

Japan 日本

日本將修訂《無線電法施行細則》等相關規定

[法規草案] 日本將修訂《無線電法施行細則》等相關規定，針對運行於約 600 公里軌道高度之 Ka 頻段非地球同步軌道衛星通訊系統用戶終端所使用之無線電設備，新增技術規範要求。

該類運行於約 600 公里軌道高度之 Ka 頻段非地球同步軌道衛星通訊系統，旨在滿足多元化通訊需求，包括提供高速網際網路與寬頻服務、支援行動網路回傳以及於自然災害等緊急情況下作為備援通訊方案。

Japan will amend the Ordinance for Enforcement of the Radio Act, etc. to introduce technical requirements for radio equipment used in user terminals that are part of a non-geostationary satellite communication system in the Ka-band, operating in orbit at an altitude of approximately 600 km.

The deployment of a non-geostationary satellite communication system in the Ka-band, which operates in orbit at an altitude of approximately 600 km, aims to meet diverse communication needs across a wide range of users. This includes providing high-speed internet and broadband services, supporting mobile network backhaul, and serving as a backup communication line during emergencies such as natural disasters.

 

Japan 日本

日本擬依最新版 CISPR 11 的內容增加各項要求

[法規草案] 日本已向世界貿易組織發布通報文件，內容包括根據最新版 CISPR 11 新增相關要求、縮小 CISPR 11 與現行國內法規（包含日本國內偏差）之差距，同時調整高頻電流設備之分類方式及擴大型號命名範圍。

為將作為 ISM 設備干擾限值與測試方法之國際標準 CISPR 11 最新版內容納入國內法規，並重新檢視高頻電流設備之相關管理架構，日本擬修訂相關部令及公告。

預定通過日期： 2026 年 3 月

預定生效日期： 2026 年 4 月

Japan notified WTO a draft document about addition of various requirements based on the contents of the latest version of CISPR 11, reduction of the gap between CISPR 11 and existing regulation with domestic deviation, changes in the classification of Equipment Utilizing High Frequency Current, expansion of the scope of type designation, etc.

In order to reflect the contents of the latest version of CISPR 11, which is the international standard for the limits and measurement methods of disturbance from ISM equipment, in domestic regulations and to review the system for Equipment Utilizing High Frequency Current, the related Ministerial Ordinances and Public Notices will be revised.

Proposed date of adoption: March, 2026

Proposed date of entry into force: April, 2026

 

Malaysia 馬來西亞

馬來西亞公布 2025 年新登錄技術規範 — MCMC MTSFB TC G056:2025 物聯網（IoT）– 隱私權要求

馬來西亞通訊與多媒體委員會（MCMC）公布 2025 年新登錄之技術規範（TC），持續強化並推動馬來西亞通訊與多媒體產業標準之發展。相關技術規範對於塑造馬來西亞新興技術與網路基礎建設之未來發展具有關鍵意義。

– MCMC MTSFB TC G056:2025 物聯網（IoT）— 隱私要求

該規範針對物聯網設備與服務之隱私保護要求進行規範，旨在提升資料安全與個人資訊保護水準，並強化物聯網應用之信任基礎。

Malaysia MCMC announced newly registered Technical Codes (TCs) for 2025, strengthening commitment to advancing standards in Malaysia’s communications and multimedia industry. These TCs play a crucial role in shaping the future of emerging technologies and network infrastructure in Malaysia.

– MCMC MTSFB TC G056:2025 Internet of Things (IoT) – Privacy Requirements

 

Pakistan 巴基斯坦

巴基斯坦電信管理局（PTA）發布修訂版《短距離設備（SRD）與地面物聯網（IoT）服務監管框架》

巴基斯坦電信管理局（PTA）已發布修訂版《短距離設備（SRD）與地面物聯網（IoT）服務監管框架》，並於 2025 年 12 月 18 日正式生效。此更新明確規範在巴基斯坦境內營運、部署及申請許可短距離設備與地面物聯網系統所需符合之技術標準、監管要求及頻譜管理條件。

The Pakistan Telecommunication Authority (PTA) has issued a revised version of its regulatory framework for Short Range Devices (SRD) and Terrestrial Internet of Things (IoT) services, officially released on 18 December 2025. This updated framework outlines the technical, regulatory, and spectrum management conditions governing the operation, deployment, and licensing of SRD and terrestrial IoT systems in Pakistan.

 

UK 英國

英國發布《2025 年無線電設備（修訂）（北愛爾蘭）條例》

英國公布《2025 年無線電設備（修訂）（北愛爾蘭）條例》。本指南闡述了該條例如何適用於在北愛爾蘭市場投放之無線電設備。

本指引適用於在北愛爾蘭投放無線電設備的企業，並參考了《2025 年無線電設備（修訂）（北愛爾蘭）條例》（S.I. 2025/1244）。該條例於 2025 年 12 月 16 日生效，旨在確保歐盟委員會授權條例（EU）2022/30 在北愛爾蘭得到有效實施。

UK published Radio Equipment (Amendment) (Northern Ireland) Regulations 2025. This Guidance on the regulations as they apply to radio equipment being placed on the market in Northern Ireland.
This Guidance is for businesses placing radio equipment on the market in Northern Ireland (“NI”) having regard to the Radio Equipment (Amendment) (Northern Ireland) Regulations 2025 (S.I. 2025/1244), which came into force on 16 December 2025 and ensure effective implementation of Commission Delegated Regulation (EU) 2022/30 in NI.

 

UK 英國

英國發布《2026 年智慧能源設備（ESA）法規》草案

[法規草案] 英國發布《2026 年智慧能源設備（ESA）法規》草案。

這是英國正式宣布計畫依據《2023 年能源法》（第 239–244 條）制定相關法規。該法規對相關電熱設備引入智慧化強制要求。此外，該法規亦將廢止《2021 年電動車（智慧充電樁）法規》，並計畫對現行電動車智慧充電樁之要求（包括智慧強制性要求）進行修訂後納入本法規。該法規亦對適用範圍內之智慧能源設備（電動車智慧充電樁、電熱設備及智慧電池儲能系統）提出最低功能、網路安全及電網穩定性等要求。

UK published draft Energy Smart Appliances (ESA) Regulations 2026.

This is a formal notice of the UK’s intention to lay regulations under the Energy Act 2023 (s.239-244). The regulations introduce a smart mandate for relevant electrical heating appliances. The regulations will also revoke The Electric Vehicles (Smart Charge Point) regulations 2021 and incorporate, with some planned amendments, existing electric vehicle smart charge points requirements (including the smart mandate). The regulations also impose minimum functionality, cyber, and grid stability requirements on in-scope energy smart appliances (EVSCPs, electrical heating appliances, and smart battery energy storage systems).

 

Vietnam 越南

越南 MST 發布新版電磁相容性（EMC）標準 QCVN 86:2025/BKHCN

2025 年 12 月 31 日，越南科學與技術部（MST）發布第 52/2025/TT-BKHCN 號通告，頒布《行動通訊系統終端設備及輔助設備電磁相容性國家技術規範》（QCVN 86:2025/BKHCN），旨在規範資訊技術與電信領域相關設備之電磁相容性技術要求。該標準對應之國際標準為 ETSI EN 301 489-52 V1.3.1。新標準將自 2026 年 2 月 15 日起施行，並取代原由通信與傳媒部發布之 QCVN 86:2019/BTTTT。依過渡期規定，企業可於 2026 年 12 月 31 日前，自願選擇依新標準或舊標準進行測試與符合性聲明；自 2027 年 1 月 1 日起，相關設備須全面符合新標準要求。對於特定 HS 編碼產品（如 8517.13.00、8517.14.00、8517.62.59），新標準將取代原有 QCVN 86:2019/BTTTT 或 QCVN 18:2022/BTTTT（無線通訊 EMC 標準）。值得注意的是，自 2026 年 9 月 16 日起，GSM（2G 與 2.5G）技術之相關技術要求將不再適用，顯示越南正逐步淘汰傳統通訊技術並推動技術升級。

On December 31, 2025, the Ministry of Science and Technology (MST) of Vietnam issued Circular No. 52/2025/TT-BKHCN, promulgating the National Standard for Electromagnetic Compatibility of Terminal Equipment and Auxiliary Equipment for Mobile Communication Systems (QCVN 86:2025/BKHCN), aiming to standardize the technical requirements for electromagnetic compatibility of equipment related to the field of information technology and telecommunications. The international standard corresponding to this standard is ETSI EN 301 489-52 V1.3.1. The new standard will come into effect on February 15, 2026, replacing the QCVN 86:2019/BTTTT standard issued by the former Ministry of Communication and Information. According to the provisions of the transition period, appicants can voluntarily choose to conduct testing and compliance declarations according to the new or old standards before December 31, 2026; From January 1, 2027, the new standards must be fully implemented for relevant equipment. For devices with specific HS codes (e.g., 8517.13.00, 8517.14.00, 8517.62.59), the new standard will replace the original QCVN 86:2019/BTTTT or QCVN 18:2022/BTTTT (EMC standard for wireless communications). It is worth noting that from September 16, 2026, the relevant technical requirements for GSM (2G and 2.5G) technology will no longer apply, marking the gradual phase-out of traditional communication technologies and promoting technological upgrading in Vietnam.

 

家用電器 House Appliances

Israel 以色列

以色列洗衣機強制標準 SI 900 第 2.7 部分已於 2025 年 11 月 30 日生效

以色列強制標準 SI 900 第 2.7 部分（關於洗衣機）之修訂版，已刊登於以色列官方公報政府公告欄第 12099 號，並於 2025 年 11 月 30 日正式生效。新舊標準自生效日起至 2026 年 11 月 30 日止將並行適用。在此過渡期間，產品可依任一標準進行測試與合規。

The revision of the Mandatory Standard SI 900 part 2.7, to be replaced with SI 60335 part 2.7, dealing with washing machines, was published in the Israel Official Gazette, Section of Government Notices, no. 12099 and entered into force on 30 November 2025.The old and revised standards will apply together from the date of entry into force until 30 November 2026. During this transition period, products may be tested according to either standard.

 

Philippines 菲律賓

菲律賓提出三項能源標示計畫（PELP）實施指引草案

[法規草案] 菲律賓政府提出三項菲律賓能源標示計畫（PELP）實施指引草案。未來三類產品將被要求張貼能源標示。公眾可於 2026 年 2 月 1 日前對草案內容提出意見。

– 家用或類似用途電熨斗 PELP 實施指引草案（2025 年版，第一版）

– 電水壺與電熱水壺 PELP 實施指引草案（2025 年版，第一版）

– 家用微波爐 PELP 實施指引草案（2025 年版，第一版）

Philippones propose 3 Draft Implementation Guidelines for Philippine Energy Labeling Program (PELP). 3 products will be required Energy Label. The dtafts receive public comments till Feb-1 of 2026.

– Draft Implementing Guidelines of the PELP for Electric Irons for Household or Similar Use 2025, 1st edition

– Draft Implementing Guidelines of the PELP for Electric Kettles and Jugs 2025, 1st edition

– Draft Implementing Guidelines of the PELP for Household Microwave Ovens 2025, 1st edition

 

Saudi Arabia 沙烏地阿拉伯

沙烏地阿拉伯通報關於 SASO 2885:2025《電動洗衣機－能源效率與用水性能要求及標示》標準草案修訂通知

[法規草案] 沙烏地阿拉伯向世界貿易組織（WTO）通報關於 SASO 2885:2025 標準草案《電動洗衣機－能源效率與用水性能要求及標示》的修訂通知。

本通知涉及沙烏地阿拉伯標準 SASO 2885 之最新修訂草案，納入依據先前通報版本所收到意見而進行之修正內容。該標準規範容量不超過 25 公斤、以市電供電之洗衣機與洗烘一體機之最低能源效率要求（MEPS），並訂定相關測試方法、計算方式及標示程序，適用範圍包括嵌入式洗衣機、多槽式洗衣機及洗滌一體機。該標準亦涵蓋以市電為主要供電來源、但亦可由電池供電之相關設備。

Saudi Arabia notified WTO a revised notification about draft standard of SASO 2885:2025 – “”Electrical Clothes Washing Machines – Energy and Water Performance Requirements and Labelling

This notification concerns new draft revision of Saudi Standard SASO 2885, titled:””Electrical Clothes Washing Machines – Energy and Water Performance Requirements and Labelling.””This draft incorporates revisions made in response to comments received on the previously notified version of the standard.The standard specifies the Minimum Energy Performance Requirements (MEPS) as well as the testing, calculation, and labelling procedures for electric mains-operated washing machines and washer-dryers with capacities up to 25 kg, including built-in units, multi-drum washing machines, and washer-dryers. The scope also includes appliances that are mains-operated but can additionally be powered by batteries.

The amendments introduced in this draft include:

• Editorial updates such as deletion, modification, or clarification of certain terms.
• Adjustments to washing efficiency values and acceptable water consumption limits.
• Updating references to calculation formulas and tables, including table 5A (wEEI) to be EEI and formula B.12 ( AEC to be AECwd).
• Alignment of clauses and performance parameters with updated technical requirements.

This draft is intended to replace the previously notified version

 

UAE 阿拉伯聯合大公國

阿拉伯聯合大公國發布小型及大型空調能源效率要求技術法規

阿拉伯聯合大公國發布 2025 年第（157）號內閣決議，訂定小型及大型空調之能源效率技術規範。

– UAE.S 5010-1:2025 標示－家用電器能源效率標籤 第 1 部分：小型家用空調

– UAE.S 5010-5:2025 標示－家用電器能源效率標籤 第 5 部分：大型家用空調

UAE published Cabinet Resolution No. (157) of 2025 regarding the technical regulations for energy efficiency requirements for small and large capacity air conditioners.
– UAE.S 5010-1:2025 Labeling – Energy Efficiency Label for Electrical Appliances Part 1: Low-Capacity Household Air Conditioners
– UAE.S 5010-5:2025 Labeling – Energy Efficiency Label for Electrical Appliances Part 5: Large Capacity Household Air Conditioners

 

能源效率要求 Energy Efficiency Requirements

Colombia 哥倫比亞

哥倫比亞發布 RETIQ 修訂決議草案及過渡期安排

哥倫比亞發布一項新的決議草案，修訂有關特定電力及燃氣終端使用設備合理能源使用標示之技術法規，以作為在哥倫比亞市場銷售與使用之依據。

主要修訂內容

決議透過附件具體更新 RETIQ，關鍵變更包括：

• 擴大產品範圍：新增設備類別，如電烤箱與電視機，同時移除部分影響較低之設備，旨在涵蓋高耗能產品並提升整體能源效率。
• 更新測試標準：採用最新國際標準與規範，以確保能源效率評估之準確性。
• 調整能效分級：重新定義能效等級（如 A–G 級），並設定最低能源效率標準（MEPS），以避免低效率產品充斥市場。

過渡期安排

為確保順利實施，決議設定了過渡條款：

• 新增產品之合規期限：新增設備（如電烤箱與電視）須於決議生效後 6 個月內完成合規；過渡期間可憑製造商聲明暫時銷售。
• 既有證書處理：依據 Resolución 41012 de 2015 核發之舊證書，在新法規生效後 12 個月內仍屬有效，之後須依新規重新辦理認證。
• 實驗室要求：允許採用 ONAC 認可或具國際互認資格之實驗室進行測試，以確保測試資源之可及性。

過渡期安排旨在提供企業調整時間，避免市場供應中斷。

生效與廢止條款

• 生效時間：本決議將於刊登於官方公報 6 個月後生效。
• 廢止規定：明確廢止多項先前相關決議（如 Resolución 41012 de 2015 及其修訂版本），確保法規體系一致性。

Colombia has released a new draft resolution revising technical regulations regarding reasonable energy use labeling for certain types of electrical and gas-fired terminal equipment for sale and use in Colombia.

Key Amendments: The resolution updates RETIQ through an annex, with key changes including:

• Expanding Product Range: Adding equipment such as electric ovens and televisions, while removing some low-impact equipment. The aim is to cover high-energy-consuming products and improve overall energy efficiency.
• Updating Testing Standards: Adopting the latest international standards to ensure accurate energy efficiency assessments.
• Adjusting Energy Efficiency Ratings: Redefining efficiency ratings (e.g., A-G levels) and setting minimum energy efficiency standards (MEPS) to prevent the market from being flooded with inefficient products.

Transitional Arrangements: To ensure smooth implementation, the resolution includes transitional provisions:

• New Equipment Compliance Period: Newly added products (such as ovens and televisions) must comply with the resolution for six months after its entry into force, during which time they can be temporarily sold upon presentation of a producer’s declaration.
• Existing Certificate Handling: Old certificates (based on Resolución 41012 de 2015) are valid for 12 months, after which recertification is required according to the new regulations.
• Laboratory Requirements: Testing is permitted using ONAC-accredited or internationally recognized laboratories, ensuring testing accessibility.

The transition period aims to give businesses time to adjust and avoid market disruption.

Effective and Repeal Clauses

• Effective Date: The resolution takes effect 6 months after its publication in the official gazette.
• Repealed Regulations: Several previous related resolutions (such as Resolución 41012 de 2015 and its amendments) are explicitly repealed to ensure regulatory uniformity.

 

電池 / Batteries

臺灣

正式通過《放置型鋰電池儲能設備法定檢驗要求修訂案》

臺灣經濟部標準檢驗局（BSMI）正式通過《放置型鋰電池儲能設備法定檢驗要求修訂案》（G/TBT/N/TPKM/564），並於 2025 年 12 月 22 日公告，內容無修改。

實施日期：

電池容量 ≤ 20 kWh：2026 年 7 月 1 日生效

電池容量 20–100 kWh：2027 年 7 月 1 日生效

Taiwan adopted the final version of the “”Amendments to the Legal Inspection Requirements for Stationary Lithium Battery Storage Appliances,”” as notified in WTO TBT notification G/TBT/N/TPKM/564. The draft text was adopted without changes, and the final measure was published on 22 Dec. 2025.

Key Implementation Dates:

-For battery capacity up to 20 kWh: Enters into force on 1 Jul. 2026.

-For battery capacity over 20 kWh and not exceeding 100 kWh: Enters into force on 1 Jul. 2027.

Purpose:

The amendments aim to regulate the safety and performance of stationary lithium battery storage appliances through mandatory legal inspection requirements.

Access to Final Texts:

The final measure is available in both Chinese and English:

-Chinese version

https://members.wto.org/crnattachments/2026/TBT/TPKM/final_measure/26_00001_00_x.pdf

-English version

https://members.wto.org/crnattachments/2026/TBT/TPKM/final_measure/26_00001_00_e.pdf

This measure ensures compliance with safety standards and provides clarity on implementation timelines for manufacturers and stakeholders.

 

臺灣

正式通過《二次鋰儲能單電池組／電池（模）組／電池系統法定檢驗要求》

臺灣經濟部標準檢驗局（BSMI）正式通過《二次鋰儲能單電池組／電池（模）組／電池系統法定檢驗要求》（G/TBT/N/TPKM/566），並於 2025 年 12 月 23 日公告，內容無修改。

實施日期：

電池容量 1–20 kWh（含）：2026 年 7 月 1 日生效

電池容量 20–100 kWh：2027 年 7 月 1 日生效

The Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs of Taiwan officially adopted the “”Legal Inspection Requirements for Secondary Lithium Cell Blocks, Battery Packs (Modules), Battery Systems for battery energy storage systems (BESS) use “” as notified in WTO TBT notification G/TBT/N/TPKM/566. The draft text was adopted without changes and published on 23 Dec 2025.

Key Implementation Dates:

-For battery capacity between 1 kWh and 20 kWh (inclusive): Enters into force on 1 July 2026.

-For battery capacity over 20 kWh and not exceeding 100 kWh: Enters into force on 1 July 2027.

Purpose:

The measure establishes mandatory legal inspection requirements to ensure the safety and performance of lithium batteries used in energy storage systems.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

Australia 澳洲

澳洲發布水效（WELS）標示中使用 QR Code 之相關規定

澳洲發布 WELS 監管機構建議，說明在水資源效率標示與標準（WELS）標示要求中使用 QR Code 的相關規定。

Australia published WELS Regulator Advice. This advice clarifies the use of QR codes in relation to Water Efficiency Labelling and Standards (WELS) labelling requirements.

 

China 中國

國家認監委發布關於行動電源等產品

2025 年 12 月 23 日，國家認證認可監督管理委員會（國家認監委）於官網發布 2025 年第 27 號公告。為進一步完善強制性產品認證制度，落實產品品質安全主體責任，防範偽造認證標誌與虛假認證等違法行為，並便利社會大眾及監管機關透過強制性產品認證標誌（以下稱 CCC 標誌）查詢獲證產品及生產者相關資訊，國家認監委決定針對行動電源等產品之 CCC 標誌樣式及加施要求實施試點改革。

On December 23, 2025, CNCA issued Announcement No. 27 of 2025 on its official website. In order to further improve the compulsory product certification system, implement the main responsibility for product quality and safety, prevent illegal acts such as counterfeit certification marks and false certifications, and facilitate the public and regulatory authorities to inquire about the relevant information of certified products and producers through the compulsory product certification mark (hereinafter referred to as the CCC mark), the CNCA has decided to implement pilot reformson the CCC mark specifications and additional requirements for power banks and other products.

 

China 中國

市場監管總局發布關於調整強制性產品認證目錄內部分產品認證模式之公告

2026 年 1 月 7 日，市場監督管理總局發布公告，將熔斷器、小功率電動機、電鑽、電動砂輪機、電鎚、直流弧焊機、TIG 弧焊機、MIG／MAG 弧焊機、等離子弧切割機等 16 類原屬自我聲明模式之 CCC 目錄產品，調整為第三方認證模式。2026 年 7 月 1 日起可申請 CCC 認證、12 月 31 日前完成轉換，2027 年 1 月 1 日起需持 CCC 證書及標誌方可流通；已憑有效自我聲明出廠且不再生產的產品豁免轉換可繼續銷售，原有自我聲明系統 2026 年 7 月 1 日起停收新申請、2027 年 1 月 1 日起統一註銷。

Jan 7, 2026, the State Administration for Market Regulation (SAMR) announced its decision to shift 16 CCC-catalog products from self-declaration to third-party certification.

Covered Products: Electric welding machine, Thermal-links and Fuse-links, Small power motors, electric drills/grinders/hammers, arc welders, plasma cutters, etc.

Key Timelines & Rules

-Jul 1, 2026: Designated certifiers start accepting CCC applications; self-declaration system stops accepting new submissions (valid self-declarations can be credited for certificate conversion).

-Dec 31, 2026: Enterprises must complete CCC certificate conversion and cancel old self-declarations.

-Jan 1, 2027: All 16 products need CCC certification/mark to be sold/imported; existing self-declarations are uniformly cancelled.

Exception

Products shipped (and no longer produced) under valid self-declarations are exempt from conversion and can keep being sold.

 

China 中國

國家市場監督管理總局（國家標準化管理委員會）批准

國家市場監督管理總局（國家標準化管理委員會）批准發布《光伏組件 加強應力試驗 第 1 部分：組件》等 14 項國家標準化指導性技術文件，並於 2026 年 1 月 4 日公告。

其中與 P04 相關部分如下：

GB/Z 102.17—2026 半導體器件 分立器件 第 17 部分：基本絕緣與加強絕緣之磁耦合器與電容耦合器

GB/Z 116.2—2026 光伏直驅電器控制器 第 2 部分：運行模式與顯示要求

GB/Z 117.101—2026 光伏組件 電勢誘導衰減測試方法 第 1-1 部分：晶體矽組件 分層

GB/Z 118.1—2026 光伏組件 加強應力試驗 第 1 部分：組件

GB/Z 119—2026 晶體矽光伏組件 光熱誘導衰減（LETID）試驗 檢測

GB/Z 46984.2—2026 光伏電池 第 2 部分：晶體矽光伏電池電致發光影像

GB/Z 46984.3—2026 光伏電池 第 3 部分：雙面光伏電池電流－電壓特性之測量

GB/Z 46984.4—2026 光伏電池 第 4 部分：晶體矽光伏電池光熱誘導衰減試驗方法

The State Administration for Market Regulation (SAMR) approved 14 national standardization guiding technical documents, incl. “”Photovoltaic Modules – Reinforced Stress Test – Part 1: Modules””, which were announced on Jan 4, 2026. The relevant parts of P04 are as follows:
GB/Z 102.17—2026
Semiconductor Devices – Discrete Devices – Part 17: Magnetic Couplers and Capacitive Couplers with Basic Insulation and Reinforced Insulation
GB/Z 116.2—2026
Photovoltaic Direct-Drive Electrical Controllers – Part 2: Operating Modes and Display Requirements
GB/Z 117.101—2026
Photovoltaic Modules – Potential Induced Degradation (PID) Test Methods – Part 1-1: Crystalline Silicon Modules – Layering
GB/Z 118.1—2026
Photovoltaic Modules – Reinforced Stress Test – Part 1: Modules
GB/Z 119—2026
Crystalline Silicon Photovoltaic Modules – Light and Elevated Temperature Induced Degradation (LETID) Test and Detection
GB/Z 46984.2—2026
Photovoltaic Cells – Part 2: Electroluminescence Imaging of Crystalline Silicon Photovoltaic Cells
GB/Z 46984.3—2026
Photovoltaic Cells – Part 3: Measurement of Current-Voltage Characteristics of Bifacial Photovoltaic Cells
GB/Z 46984.4—2026
Photovoltaic Cells – Part 4: Light and Elevated Temperature Induced Degradation (LETID) Test Methods for Crystalline Silicon Photovoltaic Cells

 

Colombia 哥倫比亞

哥倫比亞發布修訂《技術標示規範》（RETIQ）決議草案

[法規草案] 哥倫比亞礦業與能源部發布一項新的決議草案，擬修訂《技術標示規範》（RETIQ），以促進哥倫比亞境內部分電力及燃料氣終端使用設備於商業流通與使用過程中的合理能源使用。

The Republic of Colombia informs that the Ministry of Mines and Energy informs of a new draft resolution “By which the Technical Labeling Regulation (RETIQ) is modified, for the purposes of rational use of energy applicable to some equipment for the final use of electricity and fuel gas, for its commercialization and use in Colombia​.

 

Egypt 埃及

埃及標準化組織（EOS）發布《第 245 號部長決定》

埃及標準化組織（EOS）發布《第 245 號部長決定》，要求製造商與進口商遵循所列埃及國家標準，例如：

標準編號：8604-2 / 2025

電動車額定電壓不超過 0.6／1 kV 之充電電纜－第 2 部分：測試方法

標準編號：8604-3 / 2025

電動車額定電壓不超過 0.6／1 kV 之充電電纜－第 3 部分：依據 IEC 61851-1 模式 1、2 及 3 之交流充電電纜，額定電壓不超過 450／750 V

標準編號：7825 / 2025

燈具－一般要求與測試

標準編號：3123-13 / 2025

玩具安全－第 13 部分：嗅覺棋盤遊戲、化妝品套組與味覺遊戲

製造商與進口商針對第 1 至第 13 項標準享有一年之緩衝期；其餘項目則自本決議發布日起享有六個月緩衝期，以完成相關調整與合規作業。

Obligatory Standards Published by EOS Ministerial Decisions No. 245

Producers and importers shall comply with listed Egyptian standards, for example :

– Standard No.: 8604-2 / 2025 Charging Cables For Electric Vehicles Of Rated Voltages Up To And Including 0,6/1 Kv – Part 2: Test Methods

– Standard No.: 8604-3 / 2025 Charging Cables For Electric Vehicles For Rated Voltages Up To And Including 0,6/1 Kv – Part 3: Cables For Ac Charging According To Modes 1, 2 And 3 Of Iec 61851-1 Of Rated Voltages Up To And Including 450/750 V

– Standard No.: 7825 / 2025 Luminaires – General Requirements And Tests

– Standard No.: 3123-13 / 2025 Safety Of Toys Part 13: Olfactory Board Games, Cosmetic Kits And Gustative Games

Producers and importers are given a grace period of one year for items 1-13 and for the remaining items a grace period of six months from the date of this decision to adjust their situations.​

 

India 印度

印度發布《2025 年手動工具（品質管制）命令》

印度發布《2025 年手動工具（品質管制）命令》，該法令將於 2026 年 10 月 1 日生效。

關於強制使用標準標誌：凡屬法規適用範圍內之產品，應依《2018 年印度標準局（合格評定）規則》附表二方案一（Scheme I）之規定，於取得印度標準局許可後加貼標準標誌。

India published Hand Tools (Quality Control) Order, 2025. It shall come into force on the 1st day of October, 2026.
About Compulsory use of Standard Mark: Goods or articles specified in column (2) of the Table shall conform to the corresponding entry mentioned in column (3) of the Table and shall bear the Standard Mark under a licence from the Bureau as per Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.

 

Kenya 肯亞

肯亞擬定《2025 年標準（有條件放行及拒收進口貨物處理）條例（草案）》

[法規草案] 肯亞擬定《2025 年標準（有條件放行及拒收進口貨物處理）條例（草案）》，說明海關針對有條件放行之進口貨物進行檢驗的相關程序。

目前該條例草案正公開徵求意見，意見徵詢截止日期為 2026 年 2 月 9 日。

Kenya proposes Draft The Standards (Handling of Conditionally Released and Rejected Imports) Regulations, 2025. It describes conditionally released procedure for inspection imported products at customs.
The draft regulation receive public comments till Feb-9 of 2026.

 

Mexico 墨西哥

墨西哥《海關法》重大修訂

墨西哥《海關法》於 2025–2026 年間進行重大修訂，重點在於技術現代化、強化管控與監督，以及重整報關代理人之職責。修法目的在於推動流程數位化，透過即時監控系統（如影像監控與連線庫存管理）強化可追溯性，同時加重違規處罰、取消代理人責任豁免，並全面實施電子報關制度及企業合規義務。所有修訂內容均自 2026 年 1 月 1 日起生效。

主要變更與改革（2026 年生效）：

1. 技術現代化與數位化
2. 報關行與代理機構：資格有效期限及重新認證機制
3. 強化管控與處罰措施
4. 企業與營運業者之合規義務
5. 快遞與包裹服務管理

改革總體目標：

透過提高所有利害關係人之合規與監管標準，淨化海關環境、增加稅收、打擊非法行為（如逃稅），並推動墨西哥對外貿易現代化。

更多資訊請參閱英文版本內容。

The Customs Law in Mexico has undergone crucial changes in 2025-2026, focused on technological modernization, greater control and oversight, and a restructuring of responsibilities for customs agents, seeking to digitize processes, strengthen traceability with real-time monitoring systems (video surveillance, connected inventories), toughen sanctions, and eliminate exclusions of liability for agents, as well as implement the electronic customs file and compliance obligations for companies, with full effect from January 1, 2026.

Main Changes and Reforms (Effective 2026)

1.Technological Modernization and Digitization:

Implementation of state-of-the-art electronic systems, video surveillance, and real-time monitoring.

System interoperability for continuous access by authorities.

Mandatory electronic files for all operations, with remote access and online information consolidation.

2.Customs Brokers and Agencies: Validity and Recertification:

Licenses are no longer lifetime licenses, valid for 20 years and renewable, subject to recertification every 3 years.

Full Joint and Several Liability: Exclusions of liability for customs brokers in all operations are eliminated.

Client File: Obligation to maintain and submit client files, verifying identity and infrastructure.

Customs Council: Created to issue rulings on licenses, with participation from the Ministry of Finance and Public Credit (SHCP), the Tax Administration Service (SAT), and the National Customs Administration (ANAM).

3.Increased Controls and Sanctions:

Increased Oversight: Continuous auditing and monitoring using artificial intelligence and full traceability.

Increased Fines: High penalties (up to 250-300% of the value) for classification errors, undervaluation, and other non-compliance.

Compliance with Mexican Official Standards (NOMs): Non-compliance with Mexican Official Standards may result in immediate precautionary seizure.

In this sense the most representative modification that impacts our sector is Rule 3.7.20. RETENTION AND FINE FOR LACK OF LABELING (ANNEX 26)

3-7-20 Fine for lack of labeling (Annex 26)

For the purposes of Articles 151, Section II, and 176, Section II, of the Law, when at the time of customs inspection, it is not proven that the goods comply with the Official Mexican Standards (NOMs) indicated in Annex 2.4.1,

numeral 3 of the “Agreement by which the Ministry of Economy issues General Rules and Criteria on Foreign Trade,” published in the Official Gazette of the Federation (DOF) onMay 9, 2022, and its subsequent amendments, and the data related to the commercial information established in Annex 26 is omitted or inaccurate, the interested party may prove compliance with the corresponding NOM within thirty days following notification of the inspection report and make the payment of the fine referred to in Article 176, Section II, of the Law. Law 43, 46, 151, 176, Federal Tax Code 153, Agreement by which the Ministry the Ministry of Economy issues Rules and General Criteria on Foreign Trade (Annex 2.4.1, RGCE 1.2.2., Annexes 2 and 26)

4.Obligations for Companies and Operators:

Mandatory Electronic File: 100% digitization of documents and online storage.

CFDI with Bill of Lading Supplement: Mandatory incorporation. Inventory Systems: Permanent and real-time connection with the authorities.

Document Review: Greater rigor in tariff classification, origin, and value of goods.

5.Courier and Parcel Services:

Risk analysis systems and online access for the authorities.

General Objective of the Reform

To clean up customs, increase revenue collection, combat illicit activities (such as tax evasion), and modernize Mexican foreign trade by raising compliance and control standards for all stakeholders.

 

South Korea 韓國

韓國發布修訂《安全確認消費品安全標準》附件 72（電動滑板車）之行政通知

關於修訂《安全確認消費品安全標準》附件 72（電動滑板車）之行政預告。

本次修訂旨在透過更新並強化安全標準，因應使用者非法改裝電動滑板車，使其速度超過現行每小時 25 公里最高限速所引發之安全疑慮。

– 修訂後標準將禁止任何提升最高時速之改裝行為，並禁止提供改變速度限制之方法。

– 產品須加貼明確標示，確認消費者無法自行改裝或提高最高時速。

– 安全標準前言中之「單人騎乘」文字將予以刪除，相關條款亦將同步修訂。

Administrative notice of revision to Annex 72 (electric board) of the Safety Standards for Consumer Goods Subject to Safety Confirmation

The revision aims to address safety concerns caused by users illegally modifying electric scooters to exceed the current maximum speed limit of 25 km/h by updating and strengthening the safety standards.

– The updated standards will prohibit any modifications to increase the maximum speed and ban the provision of any methods to alter the speed limit.

– Products must include clear labeling to confirm that the maximum speed cannot be modified by consumers.

– The term “”single-rider”” will be removed from the preface of the safety standards, and related clauses will be updated accordingly.

 

South Korea 韓國

韓國發布部分修訂電氣設備安全標準不合格處理規範之通知

關於部分修訂電氣設備安全標準不合格處理規範之通知。

本次修訂旨在更新電氣產品安全不合格之處理標準，使其與國際標準接軌，並反映現行實務需求。

– 與安全標準接軌：更新相關術語，確保安全標準與測試項目名稱之一致性，例如「爬電距離」、「電氣間隙」及「固體絕緣」等用語。

– 產品類別更新：調整受監管項目清單，包含刪除「電動車配件與連接器」類別，並新增「車用轉接器」類別。

– 照明設備類別調整：修訂產品名稱，使其符合更新後之標準內容。

Notice of Partial Revision of the Handling Standards for Non-Compliance with Electrical Appliance Safety Standards

The revision aims to update the non-conformance handling standards for electrical product safety to align with international standards and reflect current practices.

– Alignment with Safety Standards: Updated terminology to ensure consistency between safety standards and test item names, such as ”creepage distance,”“clearance,” and ”solid insulation.”

– Updates to Product Categories: Adjusted the list of regulated items, including the removal of “electric vehicle accessories and connectors” and the addition of “automotive adapters” as a new category.

– Adjustment of Lighting Equipment Categories: Revised product names to align with updated standards.

 

UAE 阿拉伯聯合大公國

阿拉伯聯合大公國發布關於電動車充電設備要求之技術法規

本決議之規定適用於在公共場所或商業場所使用交流電或直流電供電，並以收費方式提供充電服務之電動車充電設備（EVSE），無論其營運單位為政府機構、民營企業或持牌營運商。本法規不適用於個人於其私人住宅內安裝並供家庭或私人用途之電動車充電設備，即使主要電力供應商為其開立電費帳單亦同，除非這些設備用於向他人提供收費充電服務。

UAE published Cabinet Resolution No. (175) of 2025 regarding the technical regulations for the requirements of electric vehicle charging devices.
The provisions of this Resolution shall apply to electric vehicle chargers (EVSEs) that are powered by alternating or continuous current and used in public places or commercial locations to provide charging service for a fee, whether they are operated by government entities, the private sector, or licensed operators.
Electric vehicle chargers intended for domestic or private uses that are installed and operated by individuals in their private residences are excluded from the application of this Resolution, even if electricity consumption bills are issued for them by the main service provider, unless these devices are used to provide a charging service for a fee to others.

 

UK 英國

英國發布強制性水效標示法規草案

[法規草案] 英國發布強制性水效標示法規草案。

法規基本訊息

• 生效日期：法規將於制定後 6 個月生效（具體日期尚待確定）。非能源產品與能源產品設有不同過渡期（例如，已上市產品可享有 6–12 個月緩衝期）。
• 適用範圍：法規適用於英格蘭、威爾斯、蘇格蘭及北愛爾蘭；惟部分條款（如涉及能源產品之規定）不適用於北愛爾蘭。
• 法律依據：依據《2021 年環境法》第 52 條及《2008 年監管執行與制裁法》第 4 條制定，並已獲各地方政府同意及經議會批准。

建議通過日期：2026 年 6 月 29 日

擬議生效日期：自通過之日起 6 個月

徵詢意見截止日期：2026 年 3 月 15 日

UK Releases Draft Mandatory Water Efficiency Labelling Legislation

• Effective Date: The legislation will take effect 6 months after its drafting (specific date to be determined). Different transition periods apply to non-energy and energy products (e.g., a grace period of 6-12 months for products already on the market).
• Scope of Application: The legislation applies to England, Wales, Scotland, and Northern Ireland, but some provisions (such as those for energy products) do not extend to Northern Ireland.
• Legal Basis: Drafted under Section 52 of the Environment Act 2021 and Section 4 of the Regulatory Enforcement and Sanctions Act 2008, and has been approved by local governments and Parliament.

Proposed Adoption Date: 29 June 2026

Proposed Effective Date: 6 months from the date of adoption

Last Date for Advisory Consultation: 15 March 2026

 

Vietnam 越南

越南發布電動機車與電動輕型機車用牽引電池國家技術法規草案

[法規草案] 2025 年 12 月 4 日，越南向世界貿易組織技術性貿易壁壘（TBT）提交通報文件（G/TBT/N/VNM/383），內容為電動機車與電動輕型機車用牽引電池之國家技術法規草案。該草案規範相關電池於生產、組裝及進口過程中，須符合之技術安全與環境保護品質要求，並訂定相應之檢驗、測試與認證規範。

公共諮詢期間為 2025 年 12 月 4 日至 2026 年 2 月 2 日。

Vietnam submitted WTO TBT notification (G/TBT/N/VNM/383) on Dec. 4, 2025, imposing mandatory safety and performance standards for traction batteries used in electric motorcycles and mopeds.

Applicable Scope: Covers lead-acid, NiMH, and lithium-ion batteries (removable/non-removable) produced, assembled locally, or imported into Vietnam.

Core Requirements:

-Labeling & Structure: Clear marking of positive/negative terminals, rated voltage/capacity (permanent), and intact casing.

-Electrical Performance: NiMH/lithium-ion batteries must retain ≥80% rated capacity (stricter than international standards).

-Safety Tests: Rigorous mandatory tests (drop, water immersion, vibration, short circuit, etc.) with no leakage, fire, explosion, or structural damage allowed.

Certification & Documentation: Local testing (4 samples per model at Vietnam-accredited labs; international certifications like CB/UN38.3 are reference-only); submission of technical specs, bilingual (Vietnamese/English) user manuals, conformity declarations, and Vietnamese importer registration; labels/docs must be in Vietnamese (English supplementary acceptable).

Key Timelines: Public consultation period (Dec 4, 2025 – Feb 2, 2026); products need a Quality and Safety Certificate from Vietnam’s Registration Authority for customs clearance and market entry.

Impact: Enterprises face compliance costs for local testing, certification, and documentation.

 

Vietnam 越南

越南國會通過《數位轉型法》

越南國會於 2025 年 12 月 11 日通過該國首部《數位轉型法》，規定每年國家預算至少編列 1% 用於推動數位轉型。

該法明確規範國家機關、企業及個人在數位轉型中的原則與責任，將資料視為戰略資產，並強調資料治理與資料共享機制。法規亦要求行政程序、公共服務及電子商務全面數位化，便利公民與企業透過線上方式辦理相關事項，同時提升政府運作效率與數位經濟發展。

該法將於 2026 年 7 月 1 日正式生效。

On Dec 11, 2025, Vietnam’s National Assembly passed the Digital Transformation Law (effective July 1, 2026), establishing a unified framework for digital government/economy/society and aligning data, cybersecurity, and AI-related laws.

Key highlights include a mandate of at least 1% of annual state budget for digital transformation, national coordination tools (strategy, architecture, data governance), SME support (lower compliance costs, regulatory sandbox), and enabling experimental tech investment—aimed at fostering transparency, innovation, and investment to position Vietnam as a digital transformation leader.