《安全很有事》德國萊因TÜV官方部落格丨TÜV 莱茵大中华区博客

資訊 / 電信 ITE / Telecom

Australia 澳洲

澳洲發布關於更新電信客戶設備監管規定的提案

[法規草案]澳洲通訊與媒體管理局 (ACMA) 於 2026 年 7 月 20 日啟動電信客戶設備監管規定更新提案：

《2025 年電信（客戶設備與客戶佈線標籤公告）文書修訂草案標註彙編版》

《2026 年電信（行動設備空中介面）技術標準》

《2026 年電信（客戶設備安全）技術標準》

主要聚焦以下 3 個關鍵領域：

1.  延長《電信產品通知》(TLN) 下標準符合性的紀錄保存期限。

2.  限制針對手機標準符合性的「既得權利」安排，並在 6 個月或 12 個月的過渡期內，強制要求符合有關緊急呼叫存取的最新產業標準。

3.  採用修訂後的客戶設備安全產業標準 (AS/NZS 62368.1:2026)，並引入相關條款以消除重複的符合性義務。

歡迎於 2026 年 9 月 17 日前提出任何回饋意見。

ACMA proposal for Updates to Telecommunications Customer Equipment Regulations by the Australian Communications and Media Authority (ACMA), to be launched on July 20, 2026
Telecommunications (Labelling Notice for Customer Equipment and Customer Cabling) Instrument 2025 (TLN) – Marked-up compliation
Telecommunications (Mobile Equipment Air Interface) Technical Standard 2026
Telecommunications (Customer Equipment Safety) Technical Standard 2026
Focuses on 3 key areas:

1.  Extending record-keeping timeframes for standards compliance under the TLN.

2.  Limiting the grandfathering arrangements in relation to standards compliance for mobile phones and, subject to a 6-month or 12-month transition period, mandating compliance with the latest industry standard for emergency call access.

3.  Adopting a revised industry standard (AS/NZS 62368.1:2026) for the safety of customer equipment and introducing a provision to remove duplicative compliance obligations.

Any feedback is welcome by 17 September 2026.

參考連結： https://www.acma.gov.au/consultations/2026-07/proposal-update-telco-customer-equipment-regulation

澳洲ATA更新AS/CA S042標準

澳洲電信聯盟 (ATA) 於 2025 年 6 月 30 日發布了以下標準：

•  AS/CA S042.1:2025 電信網路空中介面連接要求 – 第 1 部分：通用要求

•  AS/CA S042.4:2025 電信網路空中介面連接要求 – 第 4 部分：IMT-2000 和 IMT-Advanced 使用者設備

•  AS/CA S042.5:2025 電信網路空中介面連接要求 – 第 5 部分：IMT-2020 使用者設備

這些標準取代了以下標準：AS/CA S042.1:2022、AS/CA S042.4:2022 和 AS/CA S042.5:2022。

The Australian Telecommunications Alliance (ATA) published the following standards on June 30, 2025:

–  AS/CA S042.1:2025 Requirements for connection to an air interface of a Telecommunications Network – Part 1: General

–  AS/CA S042.4:2025 Requirements for connection to an air interface of a Telecommunications Network—Part 4: IMT-2000 and IMT-Advanced Customer Equipment

–  AS/CA S042.5:2025 Requirements for connection to an air interface of a Telecommunications Network—Part 5: IMT-2020 Customer Equipment

These standards supersede the following standards: AS/CA S042.1:2022, AS/CA S042.4:2022, and AS/CA S042.5:2022.
On June 26, 2026, ATA published an amendment to AS/CA S042.1:2025, which renames the National Messaging System (NMS) to AusAlert.

澳洲EESS對具有夾傷風險的設備新增評估要求

對於設計中包含用於自動開啟和關閉的驅動門等具有夾傷風險的某些設備（例如微波爐），澳洲 EESS 要求需提供證據，證明該驅動功能經評估後不會造成夾傷或其他傷害風險。

以微波爐為例，AS/NZS 60335.2.25 目前沒有針對驅動門的明確評估要求。在 AS/NZS 60335.2.25 修訂並納入相關要求之前，評估此風險的一種方法是：採用不低於 AS/NZS 60335.2.31 第 20.101 條的要求。

對於 EESS 認證，符合此測試標準的測試報告不需要是正式的認可報告，但必須來自認可範圍包括 AS/NZS 60335.2.31（或 IEC 60335.2.31）的測試機構（如果是 IECEE CB 報告，則不能是 CTF3 或 CTF4）。

It has been identified some equipment (microwave ovens for example) have design that include types with driven doors for opening and closing. These driven doors or other driven parts of a microwave oven may have an entrapment risk to be addressed that AS/NZS 60335.2.25 may not fully address. Similarity the standards for equipment that have not traditionally had driven doors may not have criteria to fully address the risk of entrapment of an automatic or semi-automatic moving part.
Where a relevant standard may not address all the risks related to the particular equipment or particular
design additional tests from other standards may need to be applied.
As an example, for Microwave ovens certification requirements, in addition to full compliance with AS/NZS 60335.2.25, microwave ovens with driven doors or other driven parts that open or close automatically, and that are accessible to the end user during normal operation, are required have evidence the driven function is assessed to not be a risk of entrapment or other injury.
AS/NZS 60335.2.25 does not currently have a clear assessment requirement for driven doors. Until AS/NZS 60335.2.25 is amended to include a requirement, a method to assess this risk could be to apply
requirements no less than the requirements of AS/NZS 60335.2.31 clause 20.101.
For other equipment a method to apply requirements no less than the requirements of AS/NZS 60335.2.31 clause 20.101 could apply where the specific equipment safety standard does not have its own tests to assess entrapment or other injury from a driven part.
For EESS certification the test report to this TEST CRITERIA requirement does not need to be a formal accredited report but must come from a test facility which has accreditation that includes AS/NZS 60335.2.31 (or IEC 60335.2.31) (and not be CTF3 or CTF4 if an IECEE CB report).

參考連結： https://www.eess.gov.au/wp-content/uploads/2026/06/26-080-Information-Bulletin-Equipment-with-driven-door-draw-retractable-parts-or-the-like-v1.0.pdf

Brazil 巴西

巴西Anatel發布第789號決議，核准《巴西頻段分配、用途和分發計畫》(PDFF)，並修訂《廣播業務及其輔助業務調頻頻道和使用條件條例》(RCC-SRA)

巴西國家電信管理局 (Anatel) 通過第 789 號決議，核准更新後的國家頻率分配和指定框架 (PDFF)，並修訂適用於無線電頻段的頻道劃分和使用條件。
該決議與2026年軍用頻譜分配方案同時通過，明確了頻率使用的技術條件，並劃分了主要業務類別和次要業務類別。

The National Telecommunications Agency (Anatel) has adopted Resolution No. 789, approving the updated National Frequency Allocation and Designation Framework (PDFF) and amending the channelization and conditions of use applicable to radiofrequency bands.
The resolution, passed alongside 2026 military spectrum allocations, defines technical conditions for frequency use and establishes boundaries between primary and secondary service categories.

參考連結： https://informacoes.anatel.gov.br/legislacao/resolucoes/2026/2157-resolucao-anatel-789

巴西 ANATEL 擬建立行動裝置認證產品之實體及數位識別防偽制度

[法規草案] 巴西 ANATEL 公共諮詢第 26 號提出一套新的單件產品實體與數位識別系統，適用於經 ANATEL 認證的手機、鋰電池及手機充電器，旨在防止認證標誌遭偽造，並實現產品層級的認證與可追溯性。

Brazil ANATEL Public Consultation No. 26 proposes a new operational procedure for identifying ANATEL-certified mobile phones, lithium batteries, and mobile phone chargers through a secure authentication system combining physical security labels and unique digital identifiers.
The proposal requires each certified product unit to have a traceable “Physical-Digital Identity,” linked to ANATEL’s official validation database, enabling consumers, retailers, and regulators to verify authenticity and helping prevent counterfeiting, tampering, and unauthorized sales.
It also introduces requirements for online marketplaces to display a digital certification identifier for regulated products and allows ANATEL to monitor listings and take administrative action against non-compliant products or advertisements.

參考連結： https://apps.anatel.gov.br/ParticipaAnatel/VisualizarTextoConsulta.aspx?TelaDeOrigem=2&ConsultaId=20406

Chile 智利

智利 SUBTEL發布 Resolución Exenta N° 1.247，重新制定低功率／短距離無線設備 (SRD) 的技術規範

智利 SUBTEL 於 2026 年 7 月 10 日發佈 Resolución Exenta N° 1.247，重新制定低功率／短距離無線設備 (SRD) 的技術規範，取代 2017 年 Resolución N° 1.985；除更新各類設備的頻率、功率等技術條件外，也強化免認證設備的 Test Report、Declaration of Conformity 及 QR Code 資訊揭露要求。

Chile’s SUBTEL issued Exempt Resolution No. 1,247 on July 10, 2026, establishing new technical regulations for low-power/short-range radio devices (SRDs) and replacing Resolution No. 1,985 of 2017. In addition to updating the technical requirements, such as frequency bands and power limits, the new resolution strengthens the compliance requirements for exempt devices, including test reports, Declarations of Conformity, and QR-code-based disclosure of product information.

參考連結： https://www.bcn.cl/leychile/navegar?i=1109333&utm_source=chatgpt.com

India 印度

印度提出「網路交換器」基本要求 (ER) 草案

[法規草案] 印度提出「網路交換器」基本要求 (ER) 草案。
該草案開放公眾意見徵詢，截止日期為2026年9月7日。

India proposesraft Essential Requirements (ER) for "LAN Switch".
The draft recieves comments till 07 September 2026.

參考連結： https://members.wto.org/crnattachments/2026/TBT/IND/26_03439_00_e.pdf

印度 TEC 延長 MTCTE 下 ILAC 測試報告接受期限至 2026 年 12 月 31 日

印度電信工程中心 (TEC) 於 2026 年 6 月 30 日發布 Notification No. 5-2/2024-TC/TEC，延長在 MTCTE 制度下接受 ILAC 測試報告的期限。

根據通知，來自非與印度接壤國家、由 ILAC Signatory 認可且具 ILAC MRA Mark 使用資格之實驗室所出具的測試報告，可繼續用於下列 4 類 ER 的相關技術參數，至 2026 年 12 月 31 日：

1 )  蜂窩網路基站 (Base Station for Cellular Network) – 有源天線系統 – OTA、5G NR Type 1-O 基站、5G NR Type 2-O 基站、5G NR Type 1-H 基站、GSM 基站 (BTS) 及混合有源天線系統 (Hybrid Active Antenna System)

2)  SIM 卡 – 所有型號

3)  VHF/UHF 無線電設備系統 – 所有型號

4)  E 頻段固定無線電中繼系統 – 所有型號

On 30 June 2026, the Telecommunication Engineering Centre (TEC) issued Notification No. 5-2/2024-TC/TEC, extending the acceptance of ILAC test reports under the Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.
Under the notification, test reports issued by laboratories accredited by ILAC signatories and authorized to use the ILAC MRA Mark, located in non-border sharing countries, will continue to be accepted for relevant technical parameters of the following four ERs until 31 December 2026:

1)  Base Station for Cellular Network – Active Antenna System-OTA, Base Station 5G NR Type 1-O, Type 2-O, Type 1-H, BTS for GSM, and Hybrid Active Antenna System

2)  SIM – All variants

3)  VHF UHF Radio Equipment System – All variants

4)  E-band Fixed Radio Relay Systems – All variants

參考連結： https://tec.gov.in/public/mandatory-testing-and-certification-of-telecom-equipments-mtcte%20?utm_source=chatgpt.com

印度延長 MTCTE 17 項ER測試報告提交豁免至 2026 年 12 月 31 日

印度電信工程中心 (TEC) 宣布繼續豁免提交與MTCTE項下各類設備相關的17項ER的測試報告，豁免期限已延長至2026年12月31日或另行通知為止。

India continues to exempt from submission of test reports for 17 test parameters/interfaces pertaining to various ERs under MTCTE has been extended/granted up to 31.12.2026 or till further orders.

參考連結： https://tec.gov.in/public/mandatory-testing-and-certification-of-telecom-equipments-mtcte%20?utm_source=chatgpt.com

印度延長 PON 寬頻設備系列測試報告提交豁免至 2026 年 12 月 31 日

印度電信工程中心 (TEC) 宣布，「PON (Passive Optical Network，被動式光纖網路) 系列寬頻設備 (Broadband Equipment)」的測試報告提交豁免期限延長至 2026 年 12 月 31 日。在豁免期間，符合適用條件的 PON 系列寬頻設備可免於提交相關測試報告。

India’s Telecommunication Engineering Centre (TEC) has extended the exemption from submission of test reports for the PON (Passive Optical Network) family of Broadband Equipment until 31 December 2026. During the exemption period, eligible PON broadband equipment will remain exempt from the submission of applicable test reports.

參考連結： https://tec.gov.in/public/mandatory-testing-and-certification-of-telecom-equipments-mtcte%20?utm_source=chatgpt.com

印度 BIS 發布 ⟪Guidance on product categories under Compulsory Registration Scheme (CRS) ⟫，明確規範穿戴式眼鏡與 XR 裝置的 BIS CRS 認證分類

印度 BIS 於 2026 年 8 月 13 日發布《Guidance on product categories under Compulsory Registration Scheme (CRS)》，明確規範穿戴式眼鏡與 XR 裝置的 BIS CRS 認證分類，核心規則為依功能精準分類，且一個產品名稱對應一張證書。

核心重點：

•  嚴禁跨類別申報：眼鏡若含相機或螢幕，不得再歸類為一般無線耳機。

•  強制單獨認證：表格內每個指定產品名稱 (Product Name) 皆須單獨申請一張 BIS 證書。

•  嚴格區分型態 (Glasses vs. Headset vs. Other)：BIS 明確將「眼鏡型態 (Glasses)」、「頭戴式裝置 (Headset)」與「其他裝置 (Other)」獨立區分，型態不同即代表不同的 Product Name，必須分別申請證書。

•  「Other 類」為備用分類：若產品不屬於標準眼鏡或常見頭戴式裝置型態（例如特定單眼夾扣或特殊工業用 XR 設備），須歸入 Other AR Devices 或 Other MR Devices 申請。

•  AR/MR 眼鏡的優先判定原則：只要眼鏡具有疊加顯示螢幕 (Overlay Display)，不論是否包含相機或音訊功能，一律優先歸類至 XR 類別 (AR/MR Glasses)，不可再申報為一般 Smart Glasses。

•  功能決定規費與測試：相機功能（拍照 vs. 錄影）直接影響歸屬類別 (Digital Camera vs. Video Camera)，送測前須確認規格。

請注意，自 2025 年 12 月 5 日起，Extended Reality Products（包含所有 AR、VR、MR 等）已納入 CRS 強制列管產品。自 2026 年 5 月 1 日起，所有依舊版標準 (IS 13252-1 / IS 616) 核發的證書皆失效，所有新舊申請案均須全面採用最新的 IS/IEC 62368-1:2023 標準。

On August 13, 2026, the Indian Standards of Industry and Information Technology (BIS) released the "Guidance on product categories under Compulsory Registration Scheme (CRS)" ⟫, clearly regulating the BIS CRS certification classification for wearable glasses and XR devices. The core rule is precise categorization based on function, with one certificate per product name.
Key points:

•  Strictly prohibit cross-category reporting: Glasses containing cameras or screens cannot be classified as general wireless headphones.

•  Mandatory separate certification: Each specified product name in the form must apply for a separate BIS certificate.

•  Strict distinction between forms (Glasses vs. Headset vs. Other): BIS clearly separates "Glasses," "Headset," and "Other" into independent categories. Different forms represent different product names and must be certified separately. • "Other" is a safety net category: If the product is not a standard pair of glasses or a common helmet (e.g., a specific monocular clip-on or special industrial XR equipment), it must be classified as Other AR Devices or Other MR Devices.

•  Priority for AR/MR glasses: As long as the glasses have an overlay display, regardless of whether they include camera or audio functions, they will be prioritized for classification as XR (AR/MR Glasses) and cannot be reported as general Smart Glasses.

•  Functionality determines fees and testing: Camera functionality (photography vs. video recording) directly affects the category (Digital Camera vs. Video Camera). Specifications must be confirmed before submission for testing.

Please note that as of December 5, 2025, Extended Reality Products (including all AR, VR, MR, etc.) have been included in the CRS mandatory product list. From May 1, 2026, all certificates issued under the old standards (IS 13252-1 / IS 616) will be invalid, and all new and old applications will be required to fully adopt the latest IS/IEC 62368-1:2023 standard.

參考連結： https://www.crsbis.in/BIS/app_srv/tdc/gl/docs/Guidance_on_product_categories_under_Compulsory_Registration_Scheme_%28CRS%29.pdf?utm_source=chatgpt.com

Paraguay 巴拉圭

巴拉圭發布《國家頻率計畫》

巴拉圭國家電信委員會 (CONATEL) 核准《國家頻率分配計畫》(PNAF) 的修訂，並正式將其更名為《國家頻率計畫》(Plan Nacional de Frecuencias – PNF)。

該決議指出，現行計畫已包含足夠的技術、監管及頻率分配要素，可作為完整的國家頻率計畫，同時納入無線電頻譜使用的指導原則，包括頻譜使用、管理與管制、整合、專業化、競爭與機會均等、技術中立性及透明度。

The Telecommunication National Commision (CONATEL) of Paraguy approved amendments to the National Frequency Allocation Plan (Plan Nacional de Atribución de Frecuencias – PNAF) and officially changed its name to the National Frequency Plan (Plan Nacional de Frecuencias – PNF).
The resolution states that the existing plan already contained sufficient technical, regulatory, and frequency-allocation elements to serve as a full national frequency plan, while incorporating guiding principles for access to the radio spectrum, including spectrum use, administration and control, integration, specialization, competition and equal opportunity, technological neutrality, and transparency.
It also provides that all references to the PNAF in legal instruments, regulations, technical standards, publications, reports, and general documentation are to be understood as references to the PNF, and it instructs CONATEL to implement and periodically update the plan in accordance with ITU Radio Regulations, international developments, technological evolution, and emerging services.

參考連結： https://www.conatel.gov.py/resolucion-directorio-n-1232-2026/

Philippines 菲律賓

菲律賓為SRD增加77-81 GHz頻段

菲律賓國家電信委員會 (NTC) 已於 2026 年 6 月 29 日正式頒佈 Memorandum Circular No. 004-06-2026，修訂了原本 MC No. 03-05-2007 的規範，正式開放 77–81 GHz 頻段用於運動檢測與警報設備 (Equipment for Detecting Movement and Alert)，並限制最大射頻輸出功率為 50 mW EIRP。

On June 29, 2026, the Philippine National Telecommunications Commission (NTC) officially issued Memorandum Circular No. 004-06-2026, revising the original specification MC No. 03-05-2007, officially opening the 77–81 GHz band for equipment for detecting movement and alarm devices, and limiting the maximum radio frequency output power to 50 mW EIRP.

參考連結： https://ntc.gov.ph/wp-content/uploads/2026/MEMORANDUM_CIRCULARS/NTC_MC_No_004-06-2026.pdf

Singapore 新加坡

新加坡 IMDA 更新住宅閘道網路安全要求，強化最低安全標準

新加坡資訊通信媒體發展局 (IMDA) 於 2026 年 6 月發布新版《Security Requirements for Residential Gateways》Issue 2，更新住宅閘道 (Residential Gateway) 的網路安全要求，取代 2020 年發布的 Issue 1。

新版要求配合 Cybersecurity Labelling Scheme (CLS) Level 2，進一步強化住宅閘道在密碼安全、登入驗證、憑證管理、韌體更新及資料保護等方面的安全控制，並要求符合相關測試及驗證項目。

In June 2026, Singapore’s Infocomm Media Development Authority (IMDA) published Issue 2 of the Security Requirements for Residential Gateways, replacing Issue 1 published in 2020.
The updated requirements align with Cybersecurity Labelling Scheme (CLS) Level 2 and strengthen security controls for residential gateways, covering password security, authentication, credential management, firmware updates, and data protection.

參考連結： https://www.imda.gov.sg/assets/6f0fb057-8faf-47ab-9936-116e570b882f.pdf

South Africa 南非

南非ICASA發布更新版《2026年國家無線電頻率規劃》

南非獨立通信管理局 (ICASA) 宣布，根據2005年《電子通信法》(2005年第36號法案) 第34條的規定，在獲得通信和數位技術部長核准後，發布更新版《2026年國家無線電頻率規劃》(NRFP)。

ICASA Publishes an updated National Radio Frequency Plan 2026
The Independent Communications Authority of South Africa announces the publication of an updated National Radio Frequency Plan (NRFP) 2026 in accordance with section 34 of the Electronic Communications Act, 2005 (Act No 36 of 2005), following its approval by the Minister of Communications and Digital Technologies.

參考連結： https://www.icasa.org.za/news/2026/icasa-publishes-an-updated-national-radio-frequency-plan-2026

South Korea 韓國

韓國 RRA 優先實施固定衛星業務地球站無線設備符合性評估測試方法修訂

韓國國立電波研究院 (RRA) 宣布，將優先實施《無線設備符合性評估測試方法》(KS X 3123) 的部分修訂，自 2026 年 7 月 7 日起生效。
此次修訂將原適用於低地球軌道衛星通訊用無線設備的符合性評估測試方法，修訂為適用於《電波法施行令》第21條第2款所規定的固定衛星業務地球站用無線設備。
在相關國家標準修訂正式完成前，上述修訂內容將優先適用。

The Radio Research Agency (RRA) has announced the priority implementation of a partial amendment to the Test Methods for Conformity Assessment of Radio Equipment (KS X 3123), effective July 7, 2026.
The key change revises the scope of the test method from Low Earth Orbit Satellite Communications radio equipment to fixed-satellite service earth station radio equipment in accordance with Article 21(2) of the Enforcement Decree of the Radio Waves Act.
This amendment will remain in effect on a priority basis until the formal revision of the national standard (KS X 3123) is completed.

參考連結： https://www.rra.go.kr/ko/notice/noticeList_view.do?nb_seq=6460&cpage=1&nb_type=0

韓國RRA發布關於KS C 3350取代KS C 3370-1及KS C 3370-2標準通知

韓國國立電波研究院 (RRA) 發布第 2026-6 號公告，《KS C 3370-1 靠近耳朵使用之可攜式無線設備的電磁波吸收率測量程序》及《KS C 3370-2 靠近人體使用之可攜式無線設備的電磁波吸收率測量程序》廢止，兩者皆整合並由《KS C 3350 靠近人體使用之無線通訊設備的電磁波吸收率評估測量程序》取代。本公告自發布之日 2026 年 8 月 26 日起施行。

The Radio Research Agency (RRA) issued Notice No. 2026-6, announcing the withdrawal of KS C 3370-1, “Measurement Procedure for the Specific Absorption Rate (SAR) of Portable Wireless Equipment Used in Close Proximity to the Ear,” and KS C 3370-2, “Measurement Procedure for the Specific Absorption Rate (SAR) of Portable Wireless Equipment Used in Close Proximity to the Human Body.”
Both standards have been consolidated and replaced by KS C 3350, “Measurement Procedure for Evaluating the Specific Absorption Rate (SAR) of Wireless Communication Devices Used in Close Proximity to the Human Body.”
This Notice takes effect from the date of issuance, August 26, 2026.

參考連結： https://www.rra.go.kr/ko/notice/noticeList_view.do?nb_seq=6528&cpage=1&nb_type=0&searchCon=&searchTxt=&sortOrder=

韓國發布關於擬修訂《KC 62133-2標準及電池新增適用標準》的行政通知

[法規草案] 韓國技術標準院 (KATS) 發布國家技術標準院公告 第2026-248號《電器用品及生活用品安全管理運用要領》及 1 項《電器用品安全標準》(KC 62133-2) 修正草案行政預告: 1) 對品項「電池」新增適用之安全標準KC 62368-1

2)  修正 KC 62133-2 (攜帶型設備用密閉式鋰二次電池安全標準) 包括：

*  明確適用範圍

*  修正部分用語與定義

*  修正部分標示事項等

該草案意見徵詢至2026年9月16日。

The Korean Agency for Technology and Standards (KATS) issued KATS Notice No. 2026-248, announcing the proposed revisions to the Operating Guidelines for Safety Management of Electrical Appliances and Consumer Products and one Electrical Appliance Safety Standard (KC 62133-2):

1)  KC 62368-1 is newly added as an applicable safety standard for the product ) category “Battery.”

2)  KC 62133-2 (Safety Standard for Portable Sealed Secondary Lithium Cells and Batteries) is proposed to be revised, including:

–  Clarification of the scope

–  Revision of certain terms and definitions

–  Revision of certain marking/information requirements, etc.

This is currently a draft proposal, and public comments will be accepted until September 16, 2026.

參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=&cid=29339

韓國發布修訂 Tablet PC 與 Smartphone 定義及分類範圍公告

韓國技術標準院 (KATS) 發布國家技術標準院公告 《電器用品及生活用品安全管理運用要領》修正公告第2026-191號。

1.  主要修正內容：

A.  修正平板電腦(Tablet PC)的分類範圍，從螢幕對角線長度由≥ 17 公分調整為≥20公分，並定義Tablet PC和Smartphone的分類範圍；

B.  修正單電池(Cell)自主檢查之測試項目。

本公告自 2026年11月1日 起施行。

關於部分安全確認 (Safety Confirmation) 對象電器用品變更為供應商符合性確認 (SDoC) 對象電器用品之過渡措施：

1.  在本運用要領施行前，依原《附表 2》第 10 號「타」屬於安全確認對象電器用品 (안전확인대상전기용품)，且已依《電器用品及生活用品安全管理法》第 15 條第 1 項完成安全確認申報，或依第 17 條第 1 項接受安全檢查者；以及依第 16 條取得安全確認申報豁免者，均視為已依修正後規定，作為供應商符合性確認對象電器用品 (공급자적합성확인대상전기용품)，分別完成第 23 條規定的供應商符合性確認，或取得第 24 條規定的供應商符合性確認豁免。

2.  在本運用要領施行前，依原《附表 2》第 10 號「타」屬於安全確認對象電器用品，且已依第 15 條第 1 項申請安全確認申報，或依第 17 條第 1 項申請安全檢查，目前相關程序仍在進行中者，視為已依修正後規定，作為供應商符合性確認對象電器用品，完成或申請第 23 條所規定的供應商符合性確認等相關程序。

The Korea Agency for Technology and Standards (KATS) issued KATS Notice No. 2026-191, announcing amendments to the “Operational Guidelines for Safety Management of Electrical Appliances and Consumer Products.”

1.  Key Amendments:

A.  Revise the classification criteria for Tablet PCs by changing the minimum screen diagonal length from ≥ 17 cm to ≥ 20 cm, and clarify the classification criteria for Tablet PCs and smartphones.

B.  Revision of the self-inspection test items for cells

The amended notice will take effect on November 1, 2026.
Transitional measures for certain electrical appliances that are being changed from Safety Confirmation to Supplier’s Declaration of Conformity (SDoC):

1.  For electrical appliances that were subject to Safety Confirmation under Item “타” of No. 10 of the previous Annex 2 before the effective date of these amended Guidelines:

If a Safety Confirmation declaration was completed pursuant to Article 15(1) of the Electrical Appliances and Consumer Products Safety Control Act, or a safety inspection was conducted pursuant to Article 17(1); or
If an exemption from Safety Confirmation declaration was granted pursuant to Article 16,
such products shall be deemed to have completed Supplier’s Declaration of Conformity (SDoC) pursuant to Article 23, or to have received an exemption from SDoC pursuant to Article 24, respectively, under the amended provisions.

2.  For electrical appliances that were subject to Safety Confirmation under Item “타” of No. 10 of the previous Annex 2 before the effective date of these amended Guidelines, and for which a Safety Confirmation declaration pursuant to Article 15(1) or a safety inspection pursuant to Article 17(1) has already been applied for and is still in progress, such products shall be deemed to have completed or applied for the relevant SDoC procedures under Article 23 in accordance with the amended provisions.

參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=3&cid=29294

Türkiye 土耳其

土耳其發布關於無線電設備進口管制的公告

土耳其貿易部於2026年7月11日在官方公報上發布了一項修正案（產品安全與檢驗：2026/36），修訂了無線電設備的進口檢驗規則。
該修正案將先前合併的智慧手錶和無線藍牙耳機的海關稅則號列，拆分為兩個獨立的編碼：

–  8517.62.00.90.11 (智慧手錶)；以及

–  8518.30.00.90.11 (無線耳機)。

該公告自發布之日起生效，並由貿易部長負責執行。

The Turkish Ministry of Trade published an amendment (Product Safety and Inspection: 2026/36) in the Official Gazette on 11 July 2026, revising the import inspection rules for radio equipment.
The amendment separates the previously combined customs tariff entry for smartwatches and wireless Bluetooth earphones into two separate codes:

–  8517.62.00.90.11 for smartwatches; and

–  8518.30.00.90.11 for wireless earphones.

The communiqué entered into force on the date of its publication and is administered by the Minister of Trade.

參考連結： https://www.resmigazete.gov.tr/eskiler/2026/07/20260711-53.htm

土耳其發布某些產品必須帶有CE標誌的進口管制公告

土耳其貿易部於2026年7月11日在官方公報上發布一項修正案（產品安全與檢驗：2026/37），修訂了某些需要加貼CE標誌的產品的進口檢驗規則 （2026/9）。
該修正案在附件2第238行之後新增了條目8536.50.80.00.10 – 「具有運動偵測功能的產品－低電壓指令 (LVD)」，並更新了現有「家用開關」條目，將具有運動檢測功能的開關排除在外，這些開關現在包含在新增的獨立條目中。
該公告自發布之日起生效，並由貿易部長負責執行。

The Turkish Ministry of Trade published an amendment (Product Safety and Inspection: 2026/37) in the Official Gazette on 11 July 2026, revising the import inspection rules for certain products required to bear the CE marking (2026/9).
The amendment adds a new entry, 8536.50.80.00.10 – “Those with motion detection feature – LVD,” after row 238 in Annex 2, and updates the existing entry for “Household switches” to exclude switches with motion detection features, which are now covered under the new separate entry.
The communiqué entered into force on the date of its publication and is administered by the Minister of Trade.

參考連結： https://www.resmigazete.gov.tr/eskiler/2026/07/20260711-54.htm

United Arab Emirates 阿拉伯聯合大公國

阿拉伯聯合大公國發布電腦顯示器的能源效率和能源效率標籤要求草案

[法規草案] 阿拉伯聯合大公國發布了技術法規草案UAE.S 5010 -11 :2026: Part 11《電器能源效率標籤第11部分：電腦顯示器能耗效率》。
該技術法規草案規定了在阿拉伯聯合大公國市場銷售之電腦顯示器的能源效率和能源效率標籤要求。它適用於桌上型電腦顯示器、專業繪圖顯示器、遊戲顯示器以及一體式電腦的顯示元件，但不包括投影機、筆記型電腦、平板電腦、醫療顯示器、虛擬實境頭戴式顯示器、安全監控顯示器、工業控制台和互動式顯示器等產品。
該草案基於 IEC 62087-1:2015 和 IEC 62087-7:2018 標準，用於測量電腦顯示器的功耗。其目標為提高能源效率，為消費者提供清晰且可比較的能源效率訊息，降低電力消耗，並支持阿聯酋的節能和永續發展目標。

UAE published draft Technical Regulation UAE.S 5010 -11 :2026: Part 11 "Labeling – Energy Efficiency Label for Electrical Appliances Part 11: Energy Consumption Efficiency for Computer Monitor".
This draft UAE technical regulation specifies the energy efficiency and energy labeling requirements for computer monitors placed on the UAE market. It applies to desktop computer monitors, professional graphics monitors, gaming monitors, and the display component of all-in-one computers, while excluding products such as projectors, laptops, tablets, medical displays, virtual reality headsets, security displays, industrial control panels, and interactive displays.The draft establishes:

•  Maximum energy consumption limits for On Mode, Off Mode, Standby Mode, and Networked Standby Mode;

•  Requirements for Automatic Brightness Control (ABC), peak white luminance, and automatic standby functionality;

•  A methodology for calculating the Energy Efficiency Index (EEI) and classifying products into energy efficiency classes;

•  Additional power allowances for high-resolution and high-refresh-rate monitors; and

•  Energy labeling requirements, including the design and content of the energy label, such as the EEI, star rating, energy consumption, screen size, resolution, QR code, and model identification.

The draft is based on IEC 62087-1:2015 and IEC 62087-7:2018 for the measurement of power consumption of computer monitors. Its objective is to improve energy efficiency, provide consumers with clear and comparable energy performance information, reduce electricity consumption, and support the UAE's energy conservation and sustainability objectives.

參考連結： https://epingalert.org/en/Search/Index?countryIds=C784&distributionDateFrom=2026-06-22&distributionDateTo=2026-07-24&viewData=G%2FTBT%2FN%2FARE%2F708

阿拉伯聯合大公國發布電視機和電子顯示器的能源效率和能源效率標籤要求草案

[法規草案] 阿拉伯聯合大公國發布了技術法規草案 UAE.S 5010 -12 :2026《電器能源效率標籤－第12部分：電視和電子顯示器的能耗效率》。
該草案規定了在阿拉伯聯合大公國市場上銷售的電視機和電子顯示器的能源效率和能源效率標籤要求。它適用於電視機和其他電子顯示器，但不包括螢幕面積小於100平方公分的顯示器、投影機、智慧型手機、平板電腦和筆記型電腦中的整合式顯示器、醫療影像顯示器、虛擬實境頭戴式顯示器、安全監控顯示器以及工業控制台。

UAE published draft Technical Regulations UAE.S 5010 -12 :2026 for "Labeling – Energy Efficiency Label for Electrical Appliances Part 12: Energy Consumption Efficiency for Televisions and Electronic Displays".
This draft UAE Standard establishes the energy efficiency and energy labeling requirements for televisions and electronic displays placed on the market in the United Arab Emirates. It applies to televisions and other electronic displays while excluding displays with a screen area below 100 cm², projectors, integrated displays in smartphones, tablets and laptops, medical imaging displays, virtual reality headsets, security and surveillance displays, and industrial control panels.
The draft specifies:

•  Maximum allowable energy consumption limits for On Mode, Off Mode, Standby Mode, and Networked Standby Mode;

•  Energy consumption calculation methods based on display technology, screen area, and additional allowances for high-resolution (4K/8K) and HDR displays;

•  Requirements for automatic power-down functionality;

•  A methodology for calculating the Energy Efficiency Index (EEI) and assigning products to energy efficiency classes;

•  Verification testing requirements; and

•  Mandatory energy labeling requirements, including the design and content of the energy label, such as the energy efficiency class, QR code, energy consumption values, screen size, screen resolution, and other product information.

The draft is based on IEC 62087-1:2015 and GSO IEC 62087-3:2024 for measuring the power consumption of televisions and electronic displays. Its objective is to improve the energy performance of electronic displays, provide consumers with transparent and comparable energy efficiency information, reduce electricity consumption, and support the UAE's energy efficiency and sustainability objectives.

參考連結： https://epingalert.org/en/Search/Index?countryIds=C784&distributionDateFrom=2026-06-22&distributionDateTo=2026-07-24&viewData=%20G%2FTBT%2FN%2FARE%2F709

Vietnam 越南

越南發布 FM 廣播頻道及頻率使用規劃

越南科學與技術部 (BKHCN) 發布 Thông tư 43/2026/TT-BKHCN，制定 87–108 MHz FM 廣播頻段的頻道劃分及使用規劃。該通告將 87–108 MHz 頻段劃分為 209 個 FM 頻道，並規定越南各地廣播機構的頻率配置及相關使用條件。
該通告將於 2026 年 9 月 5 日生效，主要屬於無線電頻譜規劃與管理措施，並非新增 FM 廣播接收設備的產品認證或符合性評定要求。

Vietnam’s Ministry of Science and Technology (BKHCN) issued Circular No. 43/2026/TT-BKHCN on July 20, 2026, establishing the channel allocation and frequency-use plan for FM broadcasting in the 87–108 MHz band.
The Circular divides the band into 209 channels, with center frequencies ranging from 87.1 MHz to 107.9 MHz at 100 kHz intervals, and specifies frequency-use plans for Vietnam Voice (VOV) and provincial broadcasting organizations.
The Circular will take effect on September 5, 2026, replacing Circular No. 37/2017/TT-BTTTT. The measure primarily concerns radio-frequency spectrum planning and management, rather than introducing new product certification requirements for FM radio equipment.

參考連結： https://mst.gov.vn/van-ban-phap-luat/25474.htm

家用電器 House Appliances

Australia & New Zealand 澳洲 / 紐西蘭

澳洲/紐西蘭關於前開門洗衣機實施「防誤啟動」強制要求

為防止兒童意外受困洗衣機滾筒內，AS/NZS 60335.2.7:2024 和 AS/NZS 60335.2.7:2020 修訂版 1 的第 20.106 條均新增了關於前開門洗衣機的要求。
該標準針對滾筒容積超過 60 立方分米的洗衣機提出了以下要求：

–  如果門直徑大於 200 毫米，則在機器停止且門未打開的情況下，無需兩次操作即可重新啟動機器，不會造成危險。

–  如果門直徑大於 200 毫米，則在機器停止且門已鎖定、無法開啟的情況下，無需兩次操作即可重新啟動機器，不會造成危險。

–  如果門是小型輔助門 (直徑小於 200 毫米)，則在洗衣機運行暫停的情況下，如果該門可以打開和關閉，則無需兩次單獨的操作即可重新啟動機器，不會造成危險。

無論滾筒容積或門開口尺寸如何，都應遵循合理的工程安全設計原則。

Requirements for front opening doors have been added to both AS/NZS 60335.2.7:2024 clause 20.106 and AS/NZS 60335.2.7:2020 amendment 1 clause 20.106 to address issues to prevent inadvertent entrapment of child in the washing machine drum.
The requirements in the standard are for drum sizes exceeding 60dm3:

–  If door size is >200mm diameter there is no hazard if machine is stopped and door is not opened and machine is restarted without two operations required

–  If door size is >200mm diameter there is no hazard if machine is stopped and door is locked and so cannot be opened and machine is restarted without two operations required

–  If door size is a small ancillary door (and is <200mm diameter) there is no hazard if the washing machine is subject to a pause in operation, and that door is able to be opened and closed without two sperate actions to restart machine

Noting that irrespective of drum size or door opening size sound engineering principles of safe design should
be followed.

參考連結： https://www.eess.gov.au/wp-content/uploads/2026/05/26-081-Information-Bulletin-Washing-machines-with-front-opening-door-v1.0.pdf

2026年7月1日澳洲/紐西蘭可攜式空調與除濕機安全標準更新

AS/NZS 60335.2.40: 2023 和 AS/NZS 60335.2.40:2025 已納入可攜式空調和可攜式除濕機的振動測試及其他防火測試要求。
壓縮機振動測試要求目前正在審查中，因為相同的測試標準可能不適用於定速壓縮機和變速壓縮機。在審查完成之前，本公告中規定的臨時方法可適用於可攜式空調及可攜式除濕機。
附註：如果相關標準發布了其他修訂，則這些修訂將在發布後適用於本公告，並將考量規定的過渡期。

Requirements for vibration test and other tests to address fire risks for portable air conditioners and portable dehumidifiers have been included in AS/NZS 60335.2.40: 2023 and AS/NZS 60335.2.40:2025.
The compressor vibration test requirements are currently under review because the same test criteria may not be appropriate for both fixed-speed and variable-speed compressors. Until that review is completed, the interim approach set out in this bulletin is considered acceptable for portable air conditioners and portable
dehumidifiers.
NOTE: If other amendments are published for the relevant standards those amendments become applicable
to this bulletin when published considering transition periods specified.

參考連結： https://www.eess.gov.au/wp-content/uploads/2026/07/26-090-Portable-air-conditioners-and-portable-dehumidifiers-v1.0.pdf

Serbia 塞爾維亞

塞爾維亞MoME 發布關於熱水器和熱水儲存槽生態設計要求的新規定

2026 年 5 月 15 日，塞爾維亞礦業與能源部 (MoME) 發布了關於熱水器和熱水儲存槽生態設計要求的新規定（官方公報第 45/2026-81 號），以提高能源效率、標準化效能測量，並與歐盟能源政策保持一致。該規定於2026年5月23日生效，並將自2027年6月1日起施行。
本規則手冊與歐盟委員會條例 (EU) 814/2013的所有原則和基本要求相一致，該條例適用於歐洲議會和理事會關於熱水器和熱水儲存槽生態設計要求的指令2009/125/EC，以及歐盟委員會條例(EU) 2016/2282。

On May 15, 2026, the Ministry of Mining and Energy (MoME) issued a new regulation on ecodesign requirements for water heaters and hot water tanks (Official Gazette of the Republic of Serbia No. 45/2026-81) to improve energy efficiency, standardize performance measurement, and align with European Union energy policies. The regulation entered into force on May 23, 2026, and will apply from June 1, 2027.
This rulebook aligns with all principles and essential requirements of Commission Regulation (EU) No 814/2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water tanks, as well as Commission Regulation (EU) 2016/2282.

參考連結： https://www.paragraf.rs/glasila/rs/sluzbeni-glasnik-republike-srbije-45-2026.html

能源效率要求 Energy Efficiency Requirements

Peru 秘魯

秘魯發布公眾諮詢，法規更新及新增11類產品的能效要求

[法規草案] 秘魯能源和礦業部部長於2026年7月21日簽署《第285-2026-MINEM/DM號部長決議》，正式啟動《修改並納入最高法令第009-2017-EM號的最高法令草案》的公眾諮詢程序。
Resolución Ministerial N.° 285-2026-MINEM/DM – Normas y documentos legales – Ministerio de Energía y Minas – Plataforma del Estado Peruano
新增11類產品的能效標籤要求 (附件10-20):
電視機、電磁爐、微波爐、電烤箱、可攜式電烤箱、落地扇/壁扇、吊扇、洗碗機、LED照明及其控制裝置、燃氣爐具，以及電子電氣及辦公設備的待機功耗。
評議截止日期：2026年10月13日。
預計通過日期：待定。

Peru’s MINEM Launches Public Consultation to Expand Energy Efficiency Labeling for 11 Product Categories
On July 21, 2026, the Minister of Energy and Mines of Peru signed Ministerial Resolution No. 285-2026-MINEM/DM, officially initiating a 90-day public consultation process for the "Draft Supreme Decree modifying and incorporating provisions into Supreme Decree No. 009-2017-EM."
The proposed regulation aims to update the Technical Regulation on Energy Efficiency Labeling by introducing mandatory energy efficiency labeling requirements for 11 new product categories (Annexes 10 to 20):
Televisions, Induction hobs, Microwave ovens, Electric ovens, Portable electric ovens, Pedestal/wall fans, Ceiling fans, Dishwashers, LED lighting and control gear, Gas cooking appliances, Standby power consumption for electrical, electronic, and office equipment
Consultation Deadline: October 13, 2026
Proposed Adoption Date: To be determined (TBD)

參考連結： https://www.gob.pe/institucion/minem/normas-legales/8413843-285-2026-minem-dm

Brazil 巴西

巴西發布 LED 燈泡及燈具最低能源效率新規

巴西能源效率指標與標準管理委員會 (CGIEE) 於 2026 年 6 月 25 日發布了第2/2026號決議，為巴西境內的LED燈泡和LED燈具制定了新的最低能源效率要求(MEPS)。 該決議將分兩個階段實施

–  第一階段 （自 2028 年 1 月 1 日起）：最低光效須達 120 lm/W。

–  第二階段（自 2030 年 1 月 1 日起）：最低光效提高至 140 lm/W。

該法規還規定了產品生產、進口和銷售的過渡期限。這些要求適用於規定範圍內的產品，並與現有的INMETRO合格評定和標籤制度一併實施，但法規中規定的豁免情況除外。

The Brazilian Management Committee for Energy Efficiency Indicators and Levels (CGIEE) issued Resolution No. 2/2026 on 25 June 2026, establishing new minimum energy efficiency requirements for LED lamps and LED luminaires in Brazil. The implementation will take place in two phases. From 1 January 2028, the calculation of the minimum energy efficiency indices will use a luminous efficacy limit of 120 lm/W. From 1 January 2030, this value will be increased to 140 lm/W. The regulation also provides transitional deadlines for manufacturing, importation, and commercialization. The requirements apply to products within the defined scope and operate together with the existing INMETRO conformity assessment and labeling regime, subject to the exclusions set out in the regulation.

參考連結： https://www.abilumi.org.br/nova-regulamentacao-eleva-indices-minimos-de-eficiencia-energetica-para-luminarias-led-no-brasil/

South Korea 韓國

韓國能源署(KEA)發布MEPS《能源效率管理器材運用規定》修正草案預告

[法規草案] 韓國能源署(KEA)發布《能源效率管理器材運用規定》部分修正草案行政預告第 2026-798 號。
主要修正內容：

1.  調整後市場管理（事後管理）檢查項目等制度改善；自測量後市場管理（測定事後管理）的檢查項目中，排除沒有允許誤差（容許公差）的能源效率等級項目；刪除 9 項產品之中長期目標能源消耗效率的實施日期。

2.  導入以 QR Code 為基礎的電子標籤等制度；新增申報宣告值 (Declared Value) 的義務條款，使申報資料與標籤上標示的資料一致; 整理及修訂各品項能源消耗效率等級標籤的記載事項；新增 QR Code，並改善能源消耗效率等級標籤的設計。

3.  調整電冰箱等 14 項產品的能源效率標準。

詳細內容請參考氣候能源環境部之行政預告及附件說明資料。

<Draft> The Korea Energy Agency (KEA) has issued Administrative Notice No. 2026-798 on the proposed partial amendment to the “Regulations on the Operation of Energy Efficiency Management Equipment.”
<Key Amendments>

1.  Improvement of the post-market management system, including adjustments to inspection items

Exclude energy efficiency rating items with no allowable tolerance from the inspection items for post-market measurement management.
Remove the implementation dates for the mid- to long-term target energy consumption efficiency standards for nine product categories.

2.  Introduction of QR code-based electronic labels and related system improvements

Establish a new requirement for reporting Declared Values, thereby aligning the reported data with the data displayed on the label.
Revise and streamline the information required on energy efficiency rating labels for each product category.
Improve the design of energy efficiency rating labels, including the introduction of QR codes.

3.  Adjustment of energy efficiency standards for 14 product categories, including electric refrigerators

For further details, please refer to the Administrative Notice issued by the Ministry of Climate, Energy and Environment and the attached guidance materials.

參考連結： https://eep.energy.or.kr/notice/view.aspx?cate=1&no=326

燈具 / LED Luminaires /LED

Australia & New Zealand 澳洲 / 紐西蘭

澳洲/紐西蘭更新燈具控制裝置安全標準 AS/NZS 61347.1:2016

Standards Australia 於 2026 年 7 月 24 日發布 AS/NZS 61347.1:2016 Amd 3:2026，更新《Lamp controlgear, Part 1: General and safety requirements》。該標準目前已列為 Current，並重新發布納入 Amendment No. 3 的版本。
本次修訂系將 IEC 61347-1:2015 Amendment 1:2017 的相關內容納入 AS/NZS 61347.1:2016，涉及燈具控制裝置的多項安全要求，包括 SPD（Surge Protective Device）要求、SELV 標示、爬電距離與電氣間隙、接線端子、MCPCB 絕緣分類，以及溫升／加熱試驗條件等。
製造商應注意，使用 AS/NZS 61347.1:2016 進行澳洲／紐西蘭市場產品安全評估時，應確認測試報告及產品設計是否已涵蓋 Amd 3:2026 的新增要求，並與認證機構確認現有證書及新申請案件的實施方式。

Standards Australia published AS/NZS 61347.1:2016 Amd 3:2026 on 24 July 2026, updating Lamp controlgear, Part 1: General and safety requirements. The standard is currently listed as Current, with the version incorporating Amendment No. 3 now published.
The amendment incorporates relevant provisions of IEC 61347-1:2015 Amendment 1:2017 into AS/NZS 61347.1:2016 and introduces several updates to the safety requirements for lamp controlgear, including SPD (Surge Protective Device) requirements, SELV marking, creepage and clearance requirements, terminal requirements, MCPCB insulation classification, and heating/temperature-rise test conditions.
Manufacturers should ensure that products assessed against AS/NZS 61347.1:2016 for the Australian/New Zealand markets meet the requirements introduced by Amd 3:2026, and should confirm with their certification body how the amendment will be applied to existing certificates and new applications.

參考連結： https://www.standards.org.au/sector-updates/electricity-and-gas?utm_source=chatgpt.com

Colombia 哥倫比亞

哥倫比亞發布第40286號決議，修訂照明及公共照明技術規章 RETILAP

哥倫比亞能源暨礦業部（Ministerio de Minas y Energía）於2026年6月23日發布 Resolución No. 40286 de 2026，修訂照明及公共照明技術規章（RETILAP），並於2026年7月1日生效。
本次修訂主要針對新版RETILAP的條文、定義、適用範圍及部分技術與符合性評鑒要求進行調整，並修正部分文字錯誤及不必要的測試或要求，以進一步釐清法規適用並降低合規負擔。
在產品認證方面，自2026年1月1日起，新產品的符合性評定不得再依據舊版 Resolución 180540 de 2010 辦理，相關產品應依新版RETILAP取得符合性證明；已依舊版規定取得的有效證書，則依相關過渡條款處理。
此次修訂主要影響照明產品製造商、進口商及相關認證機構，業者應確認現有RETILAP證書及後續產品認證是否符合新版要求。

On June 23, 2026, Colombia’s Ministry of Mines and Energy (Ministerio de Minas y Energía) issued Resolution No. 40286 of 2026, amending the Technical Regulation for Lighting and Public Lighting (RETILAP). The Resolution entered into force on July 1, 2026.
The amendments mainly revise provisions, definitions, scope of application, and certain technical and conformity assessment requirements under the updated RETILAP. They also correct editorial errors and remove or clarify certain testing and compliance requirements to facilitate implementation.
For product certification, as of January 1, 2026, new conformity assessment procedures may no longer be conducted under the previous Resolution No. 180540 of 2010. Relevant products must comply with the updated RETILAP requirements. Existing certificates issued under the previous regulation remain subject to the applicable transitional provisions.
The amendment mainly affects manufacturers, importers, and conformity assessment bodies of lighting products. Companies should review their existing RETILAP certificates and ensure that future product certifications comply with the updated requirements.

參考連結： https://members.wto.org/crnattachments/2026/TBT/COL/modification/26_03636_00_s.pdf

Ecuador 厄瓜多

厄瓜多發技術法規PRTE INEN 069 (2R)《公共照明設備》第二次修訂草案

[法規草案] 厄瓜多生產、外貿和投資部已發布厄瓜多技術法規PRTE INEN 069 (2R)《公共照明設備》第二次修訂草案。
根據草案，擬議的技術法規將適用於在厄瓜多銷售的以下產品，無論其是國產還是進口：

–  高壓鈉燈及其組件，包括高壓鈉燈、安定器、啟動器（點火器）、電容器、光控器、光控插座和開關繼電器；以及

–  LED燈具和泛光燈及其元件，包括LED驅動器、突波保護器（SPD）、LED模組、短路帽、光控器和光控插座。

該技術法規草案不適用於：

–  用於公共照明的整合式太陽能燈具及其組件；以及

–  同時滿足下列所有條件的泛光燈：額定功率小於200W、IP防護等級低於66、IK防護等級低於0.9、顯色指數小於80。

目前該草案正在徵詢意見中。

The Ministry of Production, Foreign Trade and Investments has notified the draft Second Revision of Ecuadorian Technical Regulation PRTE INEN 069 (2R), “Lighting Equipment for Public Lighting.”
According to the draft, the proposed technical regulation would apply to the following products, whether of domestic origin or imported, when marketed in Ecuador:

–  High-pressure sodium vapor luminaires and their components, including high-pressure sodium vapor lamps, ballasts, starters (igniters), capacitors, photocontrols, photocontrol receptacles, and switching relays; and

–  LED luminaires and floodlights and their components, including LED drivers, surge protective devices (SPDs), LED modules, short-circuit caps, photocontrols, and photocontrol receptacles.

The draft technical regulation would not apply to:

–  Integrated solar luminaires for public lighting and their components; and

–  Floodlights that simultaneously meet all of the following conditions: rated power of less than 200 W, IP rating of less than 66, IK rating of less than 0.9, and CRI of less than 80.

The draft is currently open for public comment.

參考連結： https://eping.wto.org/en/Search?viewData=%20G/TBT/N/ECU/393/Rev.2

India 印度

印度－BIS 延長 LED 燈具新版標準過渡期

印度標準局 (BIS) 於 2026 年 7 月 6 日宣布，延長部分 LED 燈具新版 IS 10322 (Part 5) Series: 2026 標準在強制註冊計畫 (CRS) 下的實施過渡期。
受影響產品包括固定式及嵌入式 LED 燈具、道路及街道照明燈具、LED 投光燈、手提燈、燈串及緊急照明燈具等。
原定於 2026 年 8 月 2 日結束的新舊標準並行期限，現已延長至 2027 年 2 月 2 日，讓製造商有額外 6 個月完成產品測試及新版標準轉換。之後，相關產品須符合適用的 2026 年版標準。

On 6 July 2026, the Bureau of Indian Standards (BIS) extended the implementation deadline for certain revised IS 10322 (Part 5) Series: 2026 standards covering LED luminaires under the Compulsory Registration Scheme (CRS).
The affected products include fixed general-purpose and recessed LED luminaires, road and street lighting luminaires, LED flood lights, hand lamps, lighting chains, and emergency lighting luminaires.
The concurrent-running period for the existing and revised standards has been extended from 2 August 2026 to 2 February 2027. Manufacturers and BIS licensees therefore have an additional six months to complete testing and transition to the revised standards. After 2 February 2027, compliance with the applicable revised standards will be mandatory.

其他 / 多主題產品 Others / Products with Multiple Subjects

China 中國

中國發布多項標準/法規草案

[法規草案] 中國發布多項標準／法規草案：

•  LED 平板燈具能源效率最低允許值及能源效率等級

•  單元式空調能源效率最低允許值及能源效率等級

•  容積式空氣壓縮機能源效率最低允許值及能源效率等級

•  電動自行車鋰離子電池拆卸及壓碎安全技術要求

•  電動車傳導充電電磁相容性要求及試驗方法（替代 GB/T 40428-2021）

•  電子設備用鋰離子電池及電池組安全－第 7 部分：電子煙

•  電信設備電磁輻射技術要求及試驗方法：基地台

•  短波無線電接收及測向站電磁環境要求（替代 GB 13614-2012）

•  民用無人機雷射對抗設備通用技術要求

•  民用無人機高功率微波對抗設備通用技術要求

•  民用無人機資料鏈路網路安全要求

•  民用無人機偵測與避障要求

•  民用無人機飛行控制系統資料記錄要求

•  電動汽車動力電池拆卸及破碎安全要求

世界貿易組織 (WTO) 亦已發布相關通報，目前正在徵詢意見。

China has published several draft stabdard/regulations:

–  Minimum allowable values of energy efficiency and energy efficiency grades of LED flat panel luminaires

–  Minimum allowable values of energy efficiency and energy efficiency grades for unitary air conditioners

–  Minimum allowable values of energy efficiency and energy efficiency grades for displacement air compressors

–  Safety technical requirements for dismantling and crushing of lithium-ion batteries for electric bicycles

–  Electromagnetic compatibility requirements and test methods of conductive charging for electric vehicles (replacing GB/T40428-2021)

–  Safety of lithium-ion batteries and battery packs for electronic appliances Part 7: Electronic cigarettes

–  Technical requirements and test methods for electromagnetic radiation of telecommunications equipment : base stations

–  Electromagnetic environment requirements for-Short-wave radio receiving and direction finding stations (replacing GB 13614-2012)

–  General technical requirements for laser countermeasures equipment for civil unmanned aircrafts

–  General technical requirements for high-power microwave countermeasures equipment for civil unmanned aircrafts

–  Cybersecurity requirements for data links of civil unmanned aircraft

Detect and obstacle avoid requirements for civil unmanned aircraft;

–  Data recording requirements of the flight control system for civil unmanned aircraft

–  Safety requirements for dismantling and crushing of traction battery used in electric vehicle

WTO nofifications are also published and are under collection of comments.

South Korea 韓國

韓國公布電動車充電器相關操作指南與多項電氣產品測試標準草案

[法規草案] 韓國技術標準院 (KATS) 預告將制定並修訂與電動車 (EV) 充電器相關的操作指南及 5 項電氣產品安全標準。主要修訂內容包括在操作指南中新增電動車充電器安全標準，並支援路邊停車充電器等新產品的導入。此次修訂旨在使韓國國家安全標準 (KC) 與國際標準（IEC 61851 及 IEC 62196 系列）接軌。

The Korean Agency for Technology and Standards (KATS) is pre-announcing the establishment and revision of operational guidelines and five electrical product safety standards related to electric vehicle (EV) chargers. The key changes include adding new EV charger safety standards to the operational guidelines and supporting the launch of new products such as parking curb chargers. The revisions also aim to align Korea's national safety standards (KC) with international standards (IEC 61851 and IEC 62196 series).

參考連結： https://kats.go.kr/content.do?cmsid=239&mode=view&page=2&cid=26378

韓國發布關於擬修訂《家用電器和家用物品安全管理操作指南》的行政通知

[法規草案] 韓國技術標準院 (KATS) 預先宣布對《家用電器及家用產品安全管理操作指南》進行部分修訂，以確保電器產品安全管理系統的順利運作。主要修訂內容包括：為新指定的安全認證機構指派新的認證代碼；更新地區和海外國家名稱；以及重新整理安全標準清單。這些修訂主要涉及行政管理和規範性更新，旨在維持操作指南的時效性和準確性。

The Korean Agency for Technology and Standards (KATS) is pre-announcing a partial amendment to the Operational Guidelines for the Safety Management of Electrical Appliances and Household Products to ensure the smooth operation of the electrical product safety management system. The key changes include assigning new certification codes to a newly designated safety certification body, updating regional and overseas country names, and reorganizing the safety standards list. These are primarily administrative and housekeeping updates to keep the operational guidelines current and accurate.

參考連結： https://kats.go.kr/content.do?cmsid=239&mode=view&page=3&cid=26396

New Zealand 紐西蘭

紐西蘭正就電動車充電器的提議要求徵求公眾意見

[法規草案] 紐西蘭政府已同意對最大輸出功率超過 2.4kW 的電動車充電器進行監管，以確保其具備智慧功能並符合能源效率資訊要求。能源效率與節能管理局 (EECA) 負責制定和執行擬議的技術要求。
能源效率與節能管理局 (EECA) 已發布諮詢文件，就紐西蘭電動車充電器的提議要求徵詢公眾意見。
公眾意見徵詢截止日期為 2026 年 9 月 4 日。

New Zealand Government has agreed to regulate EV chargers with a maximum output power above 2.4kW for smart functionality and energy performance information requirements. EECA is responsible for developing and enforcing the proposed technical requirements.
Energy Efficiency Conservation Authority (EECA) has released a consultation paper seeking feedback on proposed requirements for EV chargers supplied in New Zealand.
The consultation paper is open to public comments till 04 September 2026.

參考連結： https://www.eeca.govt.nz/about/tenders-and-consultations/consultations/proposed-requirements-for-ev-chargers/

Taiwan 台灣

台灣發布《應施檢驗儲能裝置類之放置型鋰儲能裝置等商品之相關檢驗規定》預告修正

[法規草案] 經濟部標準檢驗局 (BSMI) 預告修正「應施檢驗儲能裝置類之放置型鋰儲能裝置等商品之相關檢驗規定」，擴大放置型鋰儲能裝置及二次鋰儲能電池組／電池系統之檢驗容量範圍，並更新CNS 62619、CNS 63056、CNS 16280等相關安全及併網標準。檢驗方式採型式認可逐批檢驗或驗證登錄雙軌並行，並新增延燒試驗、功能性安全及RoHS標示等要求。既有VPC證書可透過差異測試轉換為型式試驗報告。
強制日期：依電池容量分階段實施：
20 kWh以下：2026年7月1日
20～100 kWh：2027年7月1日
100～360 kWh：2028年7月1日
道路車輛動力用二次鋰電池組：2027年7月1日

To support the energy transition policy and ensure the safe deployment of large-scale energy storage systems, the BSMI proposes to expand the scope of mandatory inspection for stationary lithium energy storage systems and secondary lithium batteries intended for use in such systems. Products with a rated energy capacity of 100 kWh or below are already subject to mandatory inspection. Under this proposal, the maximum rated energy capacity covered by mandatory inspection requirements would be increased from 100 kWh to 360 kWh. In addition, the technical requirements for stationary lithium energy storage systems would be revised to align the cyber security and grid interconnection requirements with newly published CNS standards. Secondary lithium battery packs for road vehicle propulsion would remain subject to the existing mandatory inspection requirements, and their inspection scope and technical requirements would not be changed under this proposal.

參考連結： https://www.bsmi.gov.tw/wSite/public/Data/f1786530926435.pdf

台灣發布《電力轉換系統 (PCS) 及太陽光電變流器相關檢驗規定》預告修正

[法規草案] 經濟部標準檢驗局 (BSMI) 預告修正電力轉換系統 (PCS) 及太陽光電變流器相關檢驗規定，將PCS檢驗容量上限由100 kW擴大至360 kW，並更新安全、EMC、併網及資安等適用標準，包含CNS 16280、CNS 16281及相關資安要求。檢驗方式採型式認可逐批檢驗或驗證登錄雙軌並行，並同步調整RoHS標示及既有證書轉換規定。
強制日期：
PCS ≤20 kW：2026年7月1日
PCS >20～100 kW、太陽光電變流器 ≤100 kW：2027年7月1日
PCS >100～360 kW：2028年7月1日

To support the goal of achieving net-zero carbon emissions by 2050, renewable energy power generation
equipment and energy storage systems are expected to be increasingly deployed not only at outdoor sites but also in indoor environments, including households and factories. As Power Conversion Systems (PCS) and Photovoltaic (PV) inverters are critical components for energy conversion, system control, and stable operation of energy storage and solar photovoltaic systems, their safety and reliability are essential to protecting users and maintaining system stability. In view of these developments, the Bureau of Standards, Metrology and Inspection (BSMI) proposes to expand the mandatory inspection scope for PCS and PV inverters to cover models with a rated capacity not exceeding 360 kW. This measure is intended to strengthen product safety management, ensure consumer safety, and enhance the safe and stable operation of renewable energy and energy storage systems. Applicants may choose either of the following two conformity assessment procedures: Registration of Product Certification (RPC) or Type-Approved Batch Inspection (TABI).

參考連結： https://www.bsmi.gov.tw/wSite/public/Data/f1787018756611.pdf

德國萊茵TÜV 認證 TÜV Rheinland Accreditation

Taiwan 台灣

TÜV 萊因台灣實驗室取得聲壓測試資格，正式開放受理案件

德國萊因 TÜV 台灣桃園測試實驗室已成功取得聲壓測試資格，並正式開放受理相關案件。

適用產品範圍與測試標準：

已取得認可的聲壓測試能力涵蓋以下資訊類產品：

耳機／耳塞式耳機／頭戴式耳機（具免持功能）

測試將嚴格依據以下標準執行，以確保測試結果的準確性與國際認可度：

CNS 15027-1／CNS 15027-2／CNS 15027-3

EN 50332-1／EN 50332-2／EN 50332-3

測試頻率範圍涵蓋 20 Hz 至 20 kHz，測量範圍為 10 mV 至 500 mV。此外，我們的服務也將協助客戶順利符合 BSMI 認證等相關要求，提升產品的市場競爭力。

如您對此有任何疑問或需要進一步諮詢，請隨時聯絡德國萊因 TÜV。

Recently, the TÜV Rheinland Taiwan Taoyuan Testing Laboratory has successfully obtained accreditation for Sound Pressure testing and is now officially open for related projects. Applicable Product Scope and Testing Standards: Currently, our accredited sound pressure testing capabilities cover the following IT products:

Headphones/Earphones (Hands-free functions)

The testing services will strictly operate in accordance with the following standards to ensure

the accuracy and international recognition of the test results:

CNS 15027-1 / CNS 15027-2 / CNS 15027-3

EN 50332-1 / EN 50332-2 / EN 50332-3

The testing scope covers a frequency range of (20 to 20k) Hz and a measurement range of (10 to 500) mV. Furthermore, our services will assist clients in successfully passing BSMI certification and other related requirements, enhancing the market competitiveness of their products. Should you have any questions or need further consultation, please do not hesitate to contact TÜV Rheinland. We are at your service!

參考連結： https://www.bsmi.gov.tw/wSite/public/Attachment/f1647246558502.pdf

資訊 / 電信 ITE / Telecom

Chile 智利

智利 SEC 發布燃氣式戶外紅外線庭院加熱器草案（PC）No. 65/3:2026

【法規草案】智利電力暨燃料監管局（SEC）發布燃料產品安全測試與認證協定草案（PC）No. 65/3:2026 – 燃氣式戶外紅外線庭院加熱器。

此認證協定依據 CSA/ANSI Z83.26:2020 – CSA 2.37:2020 標準，制定使用氣體燃料之戶外紅外線輻射加熱器的認證程序。

此外，此協定涵蓋的產品必須符合 SEC 第 745:2004 號豁免決議或其任何替代規定。這表示該設備必須配備內建軟管及調節器進行銷售。

The Superintendency of Electricity and Fuels (SEC) of Chile has announced draft Safety Test Protocol for Safety Testing Fuel Products (PC) No. 65/3:2026 – Gas-fired outdoor infra-red patio heaters. This protocol establishes the certification procedure for outdoor infrared radiant heaters using gaseous fuels, in accordance with CSA/ANSI Z83.26:2020 – CSA 2.37:2020. Additionally, products covered by this protocol must comply with SEC Exempt Resolution No. 745:2004, or any provision that replaces it. This means that the appliance must be marketed with an incorporated hose and regulator.

參考連結： https://eping.wto.org/en/Search?viewData=%20G/TBT/N/CHL/798

India 印度

印度 TEC 就 Wi-Fi 存取點設備通用要求修訂展開公眾諮詢

2026 年 7 月 7 日，印度電信工程中心（TEC）發布公眾諮詢，就 Wi-Fi 存取點設備通用要求修訂草案（TEC 38020:2026）徵求公眾意見。

修訂重點如下：

− 新增 Wi-Fi 6 GHz 頻段及 Wi-Fi 7 標準，以及相關參數與技術特性要求；

− 規定若設備已通過 Wi-Fi 聯盟認證，則已測試的參數可豁免 TEC 認證測試；

− 要求設備應符合適用的通信設備安全保障要求（ITSAR）；

− 更新引用的安全標準及 EMC 標準至最新版本。

On July 7, 2026, the Telecom Engineering Centre (TEC) of India issued a public consultation seeking public input on the amendment to the General Requirements for Wi-Fi Access Point Equipment (TEC 38020: 2026). The key points of the revision are as follows:

− Added Wi-Fi 6GHz band and Wi-Fi 7 standards, along with related parameters and technical requirements;

− It is stipulated that if the device has passed Wi-Fi Alliance certification, the tested parameters can be exempted from TEC certification testing;

− Require the device to meet the applicable Communication Equipment Security Assurance Requirements (ITSAR) requirements;

− Updated cited safety standards and EMC standards to the latest versions.

印度發布路由器基本要求（ER）修訂草案

【法規草案】印度電信工程中心（TEC）發布電信設備強制性測試與認證（MTCTE）制度下路由器基本要求（ER）的修訂草案。

India’s Telecommunication Engineering Centre (TEC) has released draft revised Essential Requirements (ER) for Routers under the Mandatory Testing and Certification of Telecom Equipment (MTCTE) regime. This updated draft expands current standards and is open for stakeholder comments.

參考連結： https://members.wto.org/crnattachments/2026/TBT/IND/26_03096_00_e.pdf

印度發布 2026 年 5.9 GHz 頻段車聯網（Cellular V2X）車載單元免執照規則

印度發布 2026 年 5.9 GHz 頻段車聯網（Cellular V2X）車載單元免執照規則，允許符合規定的 Cellular V2X（C-V2X）車載設備，在印度 5.9 GHz 頻段免申請無線電執照即可使用。

需注意的是法規免除的是無線電執照（Radio Licence），設備型式核准（Equipment Type Approval）仍為必要要求。

India published “Use of On Board Unit for Cellular Vehicle-to-Everything Communication in the 5.9 GHz band (Exemption from Licensing Requirements) Rules, 2026”. This rule allows compliant Cellular V2X (C-V2X) vehicle-mounted devices to operate in the 5.9 GHz band in India without a radio license. It should be noted that the regulation exempts the user from a radio license, but equipment type approval is still required.

參考連結： https://www.dot.gov.in/static/uploads/2026/06/e57098ec9d7015e859c1b98d6e3fadad.pdf

印度發佈2026 年 77–81 GHz 頻段短程汽車雷達系統免執照規則

印度發布 G.S.R. 468(E)：2026 年 77–81 GHz 頻段短程車用雷達系統免執照規則，將 77–81 GHz 車用短程雷達（Short-Range Automotive Radar，SRARS）列為免無線電執照（Licence Exempt）的設備。

也就是說，符合技術條件的車用雷達，無須另外申請頻率使用執照，即可在印度使用。

需注意法規免除的是無線電執照（Radio Licence），設備型式核准（Equipment Type Approval）仍為必要要求。

India published “G.S.R. 468(E): Use of Short-Range Automotive Radar System in the 77–81 GHz band (Exemption from Licensing Requirements) Rules, 2026”. The rule classifies 77–81 GHz Short-Range Automotive Radar (SRARS) as license-exempt equipment. This means that compliant automotive radar can be used in India without requiring a separate radio frequency license. It should be noted that the regulation exempts the user from a radio license, but equipment type approval is still required.

參考連結： https://www.dot.gov.in/static/uploads/2026/06/d44ff2aec0505d538d9f3d51eba88936.pdf

印度Meity 再次延後IS 18112:2022 強制執行日期

印度 MeitY 於 2026 年 7 月 26 日再次公告，將 IS 18112:2022（Digital Television Receiver for Satellite Broadcast Transmission）的強制實施日期（Implementation Date），由 2026 年 7 月 27 日延後至 2027 年 1 月 26 日。

IS 18112:2022 實施日期延期歷程如下：

− 2025 年 4 月 26 日（原始公告）

− 第一次延後至 2025 年 10 月 26 日

− 第二次延後至 2026 年 1 月 26 日

− 第三次延後至 2026 年 7 月 26 日

− 最新延後至 2027 年 1 月 26 日

請注意 TV 產品除須符合 IS 62368 或 IS 616 外，亦須同時符合 IS 18112，方可辦理 CRS 註冊。

Meity issued another notice on July 26, 2026, postponing the implementation date of IS 18112:2022 (Digital Television Receiver for Satellite Broadcast Transmission) from July 27, 2026 to January 26, 2027.

History of IS 18112:2022 implementation date postponements:

− Original notice: April 26, 2025

− First postponement: October 26, 2025

− Second postponement: January 26, 2026

− Third postponement: July 26, 2026

− Latest postponement: January 26, 2027

Please note that TV products (IS 62368 or IS 616) must also comply with IS 18112 to be eligible for CRS registration.

參考連結： https://egazette.gov.in/WriteReadData/2026/274919.pdf?utm_source=chatgpt.com

印度 BIS 發布 IS/IEC 62368-1:2023 遷移實施指南 (FAQ)

BIS 進一步釐清 CRS 產品由 IS 13252（Part 1）:2010／IS 616:2017 遷移至 IS/IEC 62368-1:2023 的實務要求，包括既有 License 的升版程序、Migration 申請方式及過渡期間的安排。FAQ 亦鼓勵製造商儘早啟動轉換，並說明零組件（Components）與終端產品（End Products）可平行進行測試與認證，以縮短整體認證時程，降低過渡期截止前實驗室及審查資源壅塞的風險。

BIS clarified about the migration to IS/IEC 62368-1:2023, providing further clarification on the migration requirements for CRS products from IS 13252 (Part 1):2010 and IS 616:2017 to IS/IEC 62368-1:2023. The guidelines cover the upgrade process for existing BIS licenses, migration application procedures, and transitional arrangements. They also encourage manufacturers to initiate the migration as early as possible and confirm that components and end products may undergo testing and certification in parallel, helping to shorten overall certification timelines and reduce the risk of laboratory and certification bottlenecks before the transition deadline.

參考連結： https://www.crsbis.in/BIS/wtsnew.do?utm_source=chatgpt.com

Japan 日本

日本經濟產業省（METI）提議對《電器設備及材料技術要求部令》進行部分修訂

【法規草案】經濟產業省（METI）提議對《電器設備及材料技術要求部令》的解釋公告進行部分修訂。

此次修訂旨在更新日本《電器設備及材料技術要求部令》的解釋，將附錄表 2、3 和 5 合併為附錄表12，同時修訂附錄表 12，以反映最新的國際標準，包括 IEC 標準和最新的 JIS 版本。

The Ministry of Economy, Trade and Industry (METI) has proposed a partial revision to the Notice on the Interpretation of the Ministerial Ordinance Specifying Technical Requirements for Electrical Appliances and Materials. The proposed revision updates the interpretation of Japan’s ministerial ordinance on technical requirements for electrical appliances and materials by consolidating Appendix 2, 3, and 5 into Appendix 12, while also revising Appendix 12 to reflect the latest international standards, including IEC standards and the most recent corresponding JIS versions.

參考連結： https://www.meti.go.jp/policy/consumer/seian/denan/file/04_cn/ts/20130605_3/outline/kaiseigaiyou_260601.pdf

Lebanon 黎巴嫩

黎巴嫩 TRA 引入汽車零組件型式認證一年過渡期

黎巴嫩 TRA 目前針對汽車零組件提供為期一年的過渡期。在過渡期間，相關產品進口無須申請 TRA型式認證證書。然而，TRA 仍建議汽車零組件製造商及汽車製造商善用此過渡期，提前申請 TRA 證書，以利過渡期結束後順利符合相關要求。

The Lebanon TRA has introduced a one-year transition period for automotive components, during which a TRA Type Approval Certificate is not required for importation. Nevertheless, the TRA encourages automotive component manufacturers and vehicle manufacturers to apply for the certificate during the transition period to ensure compliance once the exemption expires.

Malaysia 馬來西亞

馬來西亞MCMC 更新短程設備要求和技術規範

馬來西亞通訊與多媒體委員會（MCMC）發布了《MCMC MTSFB TC T007:2026 Short Range Devices （ SRD ）》（第三次修訂）以及《 MCMC MTSFB TC T022:2026 Communication Equipment – Baseline Requirements》（通訊設備基本要求）。

MCMC MTSFB TC T007:2026 的主要更新如下：

• 安全、電磁相容性（EMC）、產品標示及電源等基線要求已移至 MCMC MTSFB TC T022:2026；

• 新增 6 GHz SRD／RLAN（5925–6425 MHz）頻段；

• 新增適用於公路及鐵路應用的超寬頻（UWB）設備要求，並納入 8500–10600 MHz UWB 運作規定；

• 重新調整 5 GHz WLAN／RLAN 頻段劃分，並新增室內及室外使用的發射功率限制；

• 採用 ETSI EN 303 687 及 EN 303 883 標準；

• 移除原 UWB 部分中 3400–3700 MHz 的頻段配置；

• 13.553–13.567 MHz 頻段新增 500 mW EIRP 發射功率類別。

MCMC MTSFB TC T022:2026《Communication Equipment – Baseline Requirements》

規範架構調整

• 2020 版：T007 同時涵蓋射頻（RF）要求及產品標示、電氣安全、電磁相容性（EMC）等通用基線要求。

• 2026 版：將通用基線要求獨立整合至新增的 MCMC MTSFB TC T022:2026，T007 則聚焦於 SRD 產品的射頻技術要求。

• 適用原則：T007 主要規定射頻參數；產品標示、電氣安全、EMC、SAR、功率密度及其他適用的通用要求，則依據產品類別適用 T022 中的相關規定。

The Malaysian Communications and Multimedia Commission (MCMC) has published the third revision of MCMC MTSFB TC T007:2026 – Short Range Devices (SRD) and introduced MCMC MTSFB TC T022:2026 – Communication Equipment – Baseline Requirements.

Key changes in MCMC MTSFB TC T007:2026

• Baseline requirements covering electrical safety, electromagnetic compatibility (EMC), product marking, and power supply have been relocated to MCMC MTSFB TC T022:2026.

• Introduces the 6 GHz SRD/RLAN frequency band (5925–6425 MHz).

• Adds requirements for Ultra-Wideband (UWB) road and rail applications, including operation in the 8500–10600 MHz frequency range.

• Revises the 5 GHz WLAN/RLAN frequency allocations and introduces separate indoor and outdoor transmit power limits.

• Adopts ETSI EN 303 687 and ETSI EN 303 883 as applicable technical standards.

• Removes the 3400–3700 MHz UWB frequency allocation included in previous editions.

• Introduces a new 500 mW EIRP category for operation in the 13.553–13.567 MHz frequency band.

MCMC MTSFB TC T022:2026 – Communication Equipment – Baseline Requirements

Regulatory Framework Restructuring

• 2020 Framework: MCMC MTSFB TC T007 included both RF technical requirements and general baseline requirements, such as product marking, electrical safety, and electromagnetic compatibility (EMC).

• 2026 Framework: The general baseline requirements have been consolidated into the newly established MCMC MTSFB TC T022:2026 – Communication Equipment – Baseline Requirements, while MCMC MTSFB TC T007:2026 is now focused exclusively on RF technical requirements for Short Range Devices (SRDs).

• Compliance approach: T007 specifies the applicable RF technical requirements, whereas product marking, electrical safety, EMC, Specific Absorption Rate (SAR), power density, and other applicable baseline requirements are addressed in T022, depending on the product category.

參考連結： https://mtsfb.org.my/working_group/wg8-communications-terminal/?utm_source=chatgpt.com

馬拉西亞MCMC 就新的物聯網安全及隱私標準徵求意見

2026 年 7 月 15 日，馬來西亞通訊與多媒體委員會（MCMC）透過技術標準論壇（MTSFB）就新的物聯網功能安全、網路安全及隱私管理標準徵求意見。主要內容如下：

• 新的技術標準將取代現有的 MCMC MTSFB TC G013:2018；

• 馬來西亞現有的物聯網安全標準包括：應用安全 MCMC MTSFB TC G031、設備安全 MCMC MTSFB TC G031、隱私要求 MCMC MTSFB TC G031 及功能安全 MCMC MTSFB TC G031，這些標準被新的標準草案引用。由於新標準引用上述標準中的內容，因此技術及合規難度大幅提升；

• 標準要求功能安全、網路安全、隱私管控貫穿設備完整生命週期：廠商必須長期提供經簽章的 OTA 韌體更新、漏洞回應機制、持續安全監控及故障追溯日誌留存。

On July 15, 2026, the Malaysian Communications and Multimedia Council (MCMC) solicited feedback on new IoT functional safety, cybersecurity, and privacy management standards through the Technical Standards Forum Bhd (MTSFB). The main contents are as follows:

• The new technical standard will replace the existing MCMC MTSFB TC G013:2018;

• Malaysia’s existing IoT security standards include: Application Security MCMC MTSFB TC G031, Device Security MCMC MTSFB TC G031, Privacy Requirements MCMC MTSFB TC G031, and Functional Safety MCMC MTSFB TC G031. These standards are referenced in the new draft standards. Because the new standard references content from the above standards, the technical and compliance difficulties have greatly increased;

• The standard requires functional safety, network security, and privacy controls throughout the entire device lifecycle: vendors must provide long-term signed OTA firmware updates, vulnerability response mechanisms, continuous security monitoring, and fault traceability log retention.

參考連結： https://mtsfb.org.my/technical-code/

Mexico 墨西哥

墨西哥 SE 對智慧型手機及其他行動電話強制執行 NOM-001／NOM-024

墨西哥經濟部（SE）於 2026 年 5 月 29 日發布修正《對外貿易一般規則及標準》，內容包括以下更新：

− 智慧型手機及其他行動電話（HS 編碼 8517.13.01、8517.14.91 及 8517.18.99）不再適用簡化進口合規豁免。其後，SE 透過 SNICE 公告確認，相關產品自 2026 年 7 月 1 日起，進口時須證明符合適用的 NOM 標準，包括 NOM-001-SCFI-2018 及 NOM-024-SCFI-2013。

− SE 將啟用新的 PLATIICA（Plataforma Tecnológica Integral de Infraestructura de la Calidad）平台，用於管理標準化、計量、符合性評鑑、市場監督、驗證，以及相關資訊、服務與行政程序。

本協議已於 2026 年 5 月 30 日生效；惟上述手機產品的 NOM 合規要求自 2026 年 7 月 1 日起開始適用。

On 29 May 2026, Mexico’s Secretariat of Economy (SE) published amendments to the General Rules and Criteria on Foreign Trade, introducing the following updates:

− Smartphones and other mobile phones classified under HS Codes 8517.13.01, 8517.14.91, and 8517.18.99 are no longer eligible for the simplified import compliance exemption. Subsequently, SNICE confirmed that, effective 1 July 2026, these products must demonstrate compliance with the applicable NOM standards, including NOM-001-SCFI-2018 and NOM-024-SCFI-2013, when imported into Mexico.

− SE will implement a new platform, PLATIICA (Plataforma Tecnológica Integral de Infraestructura de la Calidad), to manage information, services, procedures, and activities related to standardization, metrology, conformity assessment, market surveillance, and verification.

The amendments entered into force on 30 May 2026; however, the NOM compliance requirements for the above-mentioned mobile phone products become applicable on 1 July 2026.

參考連結： https://www.dof.gob.mx/nota_detalle.php?codigo=5788992&fecha=29%2F05%2F2026&utm_source=chatgpt.com

South Korea 韓國

韓國發布廣播通訊器材等符合性評鑑公告

韓國國家無線電研究機構（RRA）於 2026 年 7 月 24 日發布《廣播與電信設備符合性評鑑公告》第 2026-4 號，修訂內容主要將《電信事業用無線設備技術標準》附則的修訂內容〈5G NR 行動通訊無線設備〉：

1) 陸地行動台（Land Mobile Station）的收發設備

2) 基地台的收發設備及中繼設備

3) 其他相關設備，納入《廣播通訊器材等符合性評鑑公告》。該公告自發布之日起生效。

On July 24, 2026, the Korea National Radio Research Agency (RRA) issued Notice No. 2026-4, amending the Notice on Conformity Assessment of Broadcasting and Telecommunications Equipment. The primary revision reflects the amendments to the supplementary provisions of the Technical Standards for Radio Equipment for Telecommunications Services, incorporating the scope of 5G NR mobile communication radio equipment into the Conformity Assessment Notice, including:

1) Transmitting and receiving equipment for Land Mobile Stations;

2) Transmitting and receiving equipment and repeater equipment for Base Stations;

3) Other related equipment.This notification takes effect on the date of its publication.

參考連結： https://www.rra.go.kr/ko/reference/lawList_view.do?lw_seq=6&lw_type=&searchCon=&lw_select=ALL&lw_model=&searchTxt=

Tonga 東加

東加 CCT 正式受理無線設備型式認可申請

東加無線通訊設備型式認可（Type Approval）主管機關已由 Ministry of Communications（MIC）移交至新成立的 Communications Commission Tonga（CCT）。自 2026 年 7 月 1 日起，所有新的Type Approval 申請均由 CCT 負責受理。MIC 已核發的 Type Approval 證書原則上持續有效；後續的新申請、變更或續證案件應向 CCT 辦理。

The responsibility for wireless equipment Type Approval in Tonga has been transferred from the Ministry of Communications (MIC) to the newly established Communications Commission Tonga (CCT). Starting 1 July 2026, all new Type Approval applications are processed by CCT. Type Approval certificates issued previously by MIC are generally expected to remain valid. Future applications, amendments, or renewals should be submitted to CCT.

參考連結： https://talanoaotonga.to/crown-prince-highlights-independence-connectivity-and-national-development-at-cct-headquarters-launch/

Vietnam 越南

越南發布網際網路協定（IP）監視攝影機設備國家技術規範－基本網路安全要求

越南發布第 48/2026/TT-BCA 號通知，公布新的國家技術法規《QCVN 11:2026/BCA——網際網路協定（IP）網路攝影機基本網路安全要求》。該法規取代現行的《QCVN 135:2024/BTTTT》，並自2026 年 7 月 1 日起正式生效。

Vietnam publishes Circular No. 48/2026/TT-BCA on QCVN 11:2026/BCA on technical regulation for Surveillance Camera using Internet Protocol – Baseline cybersecurity requirements. It replaces current regulation QCVN 135:2024/BTTTT and is effective from 01 July 2026.

參考連結： https://datafiles.chinhphu.vn/cpp/files/vbpq/2026/4/48-bca.pdf

越南科技部擬發布修訂版中高風險產品清單

【法規草案】越南科技部（MST）擬發布第二版／修訂版通知草案，該草案規定由科技部負責管理的中高風險產品及商品清單，並根據越南進出口商品清單列出相應的 HS 編碼、國家技術標準、產品說明及品質管理要求。

Vietnam proposes second/revised draft Circular stipulates the List of products and goods with medium and high risk levels under the management responsibility of the Ministry of Science and Technology, along with the corresponding HS codes in accordance with the Vietnamese Export and Import Goods List, corresponding national technical standards, product descriptions, and corresponding quality management requirements. The draft is expected to replace Circular No. 29/2025/TT-BKHCN.

參考連結： https://mst.gov.vn/van-ban-phap-luat/du-thao/2482.htm

家用電器 House Appliances

China 中國

中國發布家用空調能源效率等級和最低能源效率允許值國家標準草案

【法規草案】中國發布《家用空調能源效率等級和最低能源效率允許值國家標準（草案）》。該文件規定了家用空調的能源效率等級、最低能源效率允許值、測試方法和實施要求。該文件適用於額定冷氣能力不超過 14,000 W 的空氣冷卻式冷凝器、全密閉式電動壓縮機、T1 型氣候型家用空調，以及額

定製熱能力不超過 14,000 W 的低溫空氣源熱泵家用空調；不適用於移動式空調、多聯式空調（熱泵）、風管式空調（熱泵）和廚房空調。

China published draft National Standard of Minimum allowable values of the energy efficiency and energy efficiency grades for room air conditioners. This document specifies energy efficiency grades，minimum allowable values of energy efficiency, testing methods and implementation requirements for room air conditioners. This document applies to room air conditioners with air cooling condensers, fully enclosed electric compressors, rated cooling capacity of not exceeding 14000W, T1 climate type and low ambient temperature air source heat pump air heaters with a nominal heating capacity of not more than 14000W. This document does not apply to mobile air conditioners, multi-split air conditioning (heat pump) units, ducted air conditioning (heat pump) units and kitchen air conditioners.

參考連結： https://epingalert.org/en/Search/Index?countryIds=C156&distributionDateFrom=2026-05-25&distributionDateTo=2026-06-21&viewData=G%2FTBT%2FN%2FCHN%2F2256

South Korea 韓國

韓國發布七項電器安全標準修訂通知

韓國技術標準院（KATS）於 2026 年 7 月 20 日發布配合有關電器用品安全管理的國際協議（WTO／TBT、IECEE）修訂 7 項適用之電器用品安全標準：KC 60335-2-2、KC 60335-2-12、KC 60335-2-30、KC 60335-2-32、KC 60081、KC 60969、KC 61347-2-3。該通知自公告之日起生效，惟原安全標準得併行適用至 2027 年 7 月 20 日（即公告施行屆滿一年）為止。

On July 20, 2026, the Korea Agency for Technology and Standards (KATS) announced revisions to seven applicable Korean electrical appliance safety standards in accordance with international agreements on electrical appliance safety management (WTO/TBT and IECEE). The revised standards are: KC 60335-2-2、KC 60335-2-12、KC 60335-2-30、KC 60335-2-32 KC 60081；KC 60969、KC 61347-2-3 This notification takes effect on the date of its publication. However, the previous safety standards may continue to be applied concurrently until July 20, 2027, i.e., for one year from the effective date of this notification.

參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=&cid=26428

能源效率要求 Energy Efficiency Requirements

Australia 澳洲

澳洲發布水效率標示和標準 2025–26 年產品擴展計畫工作計畫

【法規草案】澳洲氣候變遷、能源、環境與水資源部（DCCEEW）發布了《水效率標示和標準（WELS）計畫－2025–26 年產品擴展計畫工作計畫》，概述了 WELS 在未來一年的新產品研究重點、目前發展階段和未來工作計畫。

Australia Department of Climate Change, Energy, the Environment and Water (DCCEEW) published “Water Efficiency Labelling and Standards (WELS) Scheme – Product Expansion Program 2025–26 Work Plan”, outlining WELS’s priorities for new product research in the coming year, their current stage of development, and future work plans.

參考連結： https://www.waterrating.gov.au/sites/default/files/documents/wels-product-expansion-program-2025-26-work-plan.pdf

澳洲將加強對電機、泳池水泵和空調的能效要求

【法規草案】在 2026 年 5 月 8 日舉行的能源與氣候變遷部長級理事會（ECMC）會議之後，溫室氣體和能源最低標準（GEMS）計畫正在推進針對功率不超過 65 kW 的馬達、游泳池幫浦和空調的新要求。

這些受監管產品的新規定草案預計將於 2026 至 2027 年期間發布。

New requirements for motors, pool pumps and air conditioners up to 65kW are moving forward under the Greenhouse and Energy Minimum Standards (GEMS) program after the recent Energy and Climate Change Ministerial Council (ECMC) meeting on 8 May 2026. Drafts of new determinations for these regulated products are supposed to be released during 2026-27.

參考連結： https://www.energyrating.gov.au/news-and-stories/ministers-agree-strengthen-energy-efficiency-requirements-motors-and-other-appliances

Australia & New Zealand 澳洲與紐西蘭

澳洲與紐西蘭即將推出新的能源評級產品註冊系統

【法規草案】澳洲氣候變遷、能源、環境與水資源部（DCCEEW）與能源效率和節能管理局（EECA）合作，正在推出一個全新的數位化平台，旨在革新澳洲和紐西蘭使用者與能源效率法規互動的方式。

新的能源評級 RECAP（監管、執法和合規管理平台）將取代現有的能源評級產品註冊系統，並改善註冊、合規和監管活動的管理方式。

The Department of Climate Change, Energy, the Environment and Water (DCCEEW), with the Energy Efficiency and Conservation Authority (EECA), is introducing a new digital platform to modernise how users interact with energy efficiency regulations across Australia and New Zealand. The new Energy Rating RECAP (Regulatory, Enforcement and Compliance Administration Platform) will replace the current Energy Rating Product Registration system and improve how registration, compliance, and regulatory activities are managed.

參考連結： https://www.energyrating.gov.au/news-and-stories/new-energy-rating-product-registration-system-coming

Colombia 哥倫比亞

哥倫比亞發布新版 RETIQ 能源效率標示法規

2026 年 6 月 25 日，哥倫比亞礦業暨能源部（Ministerio de Minas y Energía）正式發布 Resolución 40285 de 2026《RETIQ 技術標示法規》。新法規將於 2026 年 12 月 26 日強制實施，並新增電視機和電烤箱納入監管範圍，同時更新空調、冰箱、洗衣機及熱水器等產品的能源效率等級、測試方法和標示要求。

On 25 June 2026, Colombia’s Ministry of Mines and Energy published Resolution 40285 of 2026 (RETIQ Technical Regulation on Energy Labeling). The regulation will become mandatory on 26 December 2026 and expands its scope to include televisions and electric ovens, while updating efficiency classifications, testing methods, and labeling requirements for air conditioners, refrigerators, washing machines, and water heaters.

Jordan 約旦

約旦 JSMO 宣布擴大接受歐盟新能源效率標示的範圍

約旦標準與計量組織（JSMO）於 2026 年 6 月 10 日發布第 11834 號通告，在約旦更新本國技術法規之前，擴大暫時接受歐盟新版能源效率標示的範圍。適用範圍不再限於最初的 6 類產品，而是擴大至所有受能源效率標示管控的節能電器（所有適用能源效率標示計畫的節能設備／家用電器）。

此臨時措施旨在促進貿易，直至約旦當地相關技術法規正式更新並實施為止。

The Jordanian Standards and Metrology Organization (JSMO) issued Notification No. 11834 on June 10, 2026, expanding the scope of temporary acceptance of the new EU energy labeling scheme pending the update of Jordan’s national technical regulations. The scope is no longer limited to the initial six product categories, but extended to all energy-efficient appliances subject to energy labeling (all energy-efficient equipment/household appliances applicable to the energy labeling scheme).

參考連結： https://ammanchamber.org.jo/wsimages/2314.pdf

Uzbekistan 烏茲別克

烏茲別克發布新版能源效率標示要求

由烏茲別克標準研究院與電氣工業領域標準化技術委員會聯合制定的 O‘zMSt 682:2025《Maishiy va boshqa energiya iste’mol qiluvchi qurilmalarning energiya samaradorligini tamg‘alashga umumiy talablar》已於 2026 年 6 月 1 日正式生效。該標準取代原 O‘z DSt 3017:2015《家用及其他耗能設備能源效率標示通用要求》，為烏茲別克 CUz 能源效率標示體系建立新的技術基礎，並進一步推動當地能源效率管理制度與國際要求接軌。

O‘zMSt 682:2025 “General Requirements for Energy Efficiency Labeling of Household and Other Energy-Consuming Devices”, jointly developed by the Uzbekistan Scientific Research Institute for Standardization and the Technical Committee for Standardization in the Electrical Industry, entered into force on 1 June 2026. The new standard replaces O‘z DSt 3017:2015, establishing an updated technical framework for Uzbekistan’s CUz energy labeling system and supporting closer alignment with international energy efficiency practices.

參考連結： O’zbekiston Standartlar Instituti | UZSTI – Standartlashtirish va Sertifikatlashtirish

電池 / Batteries

China 中國

GB 31241.4-2026《電子電器用鋰離子電池和電池組安全 第 4 部分：玩具》將於 2027 年 4
月 1 日起實施

中國強制性國家標準 GB 31241.4-2026《電子電器用鋰離子電池和電池組安全 第 4 部分：玩具》將於2027 年 4 月 1 日起實施。

GB 31241.4-2026 並不是 GB 31241-2022 的修訂版，而是 GB 31241 系列新增的第 4 部分（Part 4），專門針對玩具使用的鋰離子電池與電池組訂定安全要求，而 GB 31241-2022 仍主要適用於可攜式電子產品使用的鋰電池。

Safety of lithium ion cells and batteries used in electronic and electrical equipment—Part 4: Toys, will enter into force from 01 April, 2027. GB 31241.4-2026 is not a revision of GB 31241-2022, but rather a new Part 4 in the GB 31241 series, which specifically sets safety requirements for lithium ion cells and batteries used in toys. GB 31241-2022, on the other hand, mainly applies to lithium batteries used in portable electronic products.

參考連結： https://openstd.samr.gov.cn/bzgk/std/newGbInfo?hcno=79A619C598C295A52B2CA962FB934826

Taiwan 台灣

台灣發布《電源設備（包括二次鋰電池組）檢驗要求》修訂草案

經濟部標準檢驗局（BSMI）預告修正「應施檢驗電源供應設備類之二次鋰行動電源等商品之相關檢驗規定」，擴大納管範圍至二次鋰電池充電盒、行動式車輛啟動電源、二次鋰單電池、電池組／系統及道路車輛非動力用二次鋰電池組等產品，並更新檢驗標準、檢驗方式及 RoHS 標示要求。修正內容導入 CNS 62133-2、CNS 62619 等新版安全標準，部分既有 VPC 證書及型式試驗報告可透過差異測試轉換，以提升鋰電池產品安全及完善管理制度。

強制日期：

二次鋰行動電源（項次 1）：2027 年 7 月 1 日。

新增納管商品（項次 2～6）及二次鋰電池相關商品新檢驗方式（項次 7～9）：2028 年 1 月 1 日。

The Bureau of Standards, Metrology and Inspection (BSMI), under the Ministry of Economic Affairs (MOEA), in view of the widespread use and higher risk associated with commodities containing lithium ion cells and batteries, and in order to enhance product safety and protect consumers’ rights and interests, the Bureau of Standards, Metrology and Inspection (BSMI) proposes to revise the inspection requirements for 9 types of listed electronic products, including secondary lithium power banks and other power supply equipment. The principal amendments include expanding the inspection scope of batteries to cover secondary lithium cell blocks, battery packs, modules or systems; adopting updated versions of the applicable inspection standards; and introducing factory inspection as part of the conformity assessment procedures.

參考連結： https://www.bsmi.gov.tw/wSite/public/Data/f1783384499637.pdf

燈具 / LED Luminaiaries/LED

Peru 秘魯

秘魯法規 RM N° 215-2026-MINEM/DM－公共 LED 照明燈具強制性標準修訂

根據秘魯能源與礦產部（MINEM）官方發布第 215-2026-MINEM/DM 號部長決議，秘魯市政 LED 路燈採購強制性合規規則有所變更，具體變更內容摘要如下：

− 修訂 4 項既有市政 LED 路燈標準化採購規範（Homologation Sheets），適用於 50–55 W、90–100 W、140–150 W、190–200 W 功率範圍。

− 新增 1 項 35–45 W LED 市政路燈標準化採購規範，擴大公共照明產品的適用功率範圍。

− 所有秘魯公共機構採購市政 LED 路燈時，必須符合更新後的技術規範（Homologation Sheets），以統一技術規格、提升能源效率並優化採購流程。

According to Ministerial Resolution No. 215-2026-MINEM/DM issued by the Ministry of Energy and Mines (MINEM) of Peru, the mandatory compliance requirements for the procurement of municipal LED street luminaires have been updated. The key changes are summarized as follows:

− Revised four existing Homologation Sheets for municipal LED street luminaires covering the 50–55 W, 90–100 W, 140–150 W, and 190–200 W power ranges.

− Introduced a new Homologation Sheet for 35–45 W municipal LED street luminaires, expanding the applicable wattage range for public lighting products.

− All public entities in Peru procuring municipal LED street luminaires are required to comply with the updated Homologation Sheets, with the aim of standardizing technical specifications, improving energy efficiency, and streamlining the public procurement process.

參考連結： https://www.gob.pe/institucion/minem/normas-legales/8167678-215-2026-minem-dm?utm_source=chatgpt.com

RoHS

Brazil 巴西

巴西發布針對電氣及電子設備的 RoHS 法規

巴西國家環境委員會（CONAMA）於 2026 年 7 月 8 日通過第 516 號決議，對電氣及電子設備（EEE）中有害物質的使用實施全國性限制。該決議於 2026 年 7 月 10 日刊登於《官方公報》（DOU），並於同日生效。

此一新框架使巴西符合國際 RoHS 原則，並為將 EEE 投放至巴西市場的製造商、進口商、經銷商和零售商確立合規義務。

On July 10, 2026, Brazil officially published CONAMA Resolution 516/2026, introducing a new framework for hazardous substances in electrical and electronic equipment (EEE). The regulation took effect on the date of publication. This regulation sets mandatory limits on ten hazardous substances and establishes a new compliance framework that manufacturers and importers must adhere to before placing products on the Brazilian market.

The control of ten hazardous substances will be implemented in phases:

− Immediately: Polybrominated biphenyls (PBBs) ≤ 0.1%, Polybrominated diphenyl ethers (PBDEs) ≤ 0.1%;

− Effective after 180 days: Mercury (Hg) ≤ 0.1%;

− Effective after three years: Cadmium (Cd) ≤ 0.01%, Hexavalent Chromium (CrVI) ≤ 0.1%, Lead (Pb) ≤ 0.1%;

− Effective after four years: Di(2-ethylhexyl) phthalate (DEHP) ≤ 0.1%, Benzyl butyl phthalate(BBP) ≤ 0.1%, Dibutyl phthalate (DBP) ≤ 0.1%, Diisobutyl phthalate (DIBP) ≤ 0.1%.

參考連結： https://conama.mma.gov.br/?option=com_sisconama&task=arquivo.download&id=861

其他 / 多主題產品 Others / Products with Multiple Subjects

Mexico 墨西哥

墨西哥更新對四項 NOM 能源效率標準的引用，以加強對進口商品的管控

墨西哥經濟部（Secretaría de Economía）修改《對外貿易一般規則與標準》（Reglas y Criterios de Carácter General en Materia de Comercio Exterior）的 NOM 附件（Anexo 2.4.1，又稱 Anexo de NOM），將近期發布的新版 NOM-ENER 納入進口管制。

符合這些標準的產品在進入墨西哥之前，必須持有相應的符合性證書，以確保其符合最新的技術規範、測試方法和商業資訊要求。

在過渡期內，根據先前標準核發的有效證書將繼續有效，直至其失效。

− NOM-004-ENER-2025：用於輸送清水的電動泵組和電動泵。

− NOM-011-ENER-2025：中央空調、整體式空調或分離式空調。

− NOM-014-ENER-2025：單相交流馬達。

− NOM-016-ENER-2025：三相交流馬達。

Mexico’s Ministry of Economy has amended Annex 2.4.1 (also known as Anexo de NOM) of the General Rules and Standards for Foreign Trade (Reglas y Criterios de Carácter General en Materia de Comercio Exterior), incorporating the recently released new version of NOM-ENER into import controls.

Products conforming to these standards must hold the corresponding certificates of conformity before entering Mexico to ensure compliance with the latest technical specifications, testing methods, and commercial information requirements.

During the transition period, valid certificates issued under previous standards will remain valid until they expire.

− NOM-004-ENER-2025: Motorized pump sets and motorized pumps for pumping clean water.

− NOM-011-ENER-2025: Central air conditioning, packaged air conditioning, or split-type air conditioning.

− NOM-014-ENER-2025: Single-phase AC motors.

− NOM-016-ENER-2025: Three-phase AC motor.

參考連結： https://www.gob.mx/conuee/articulos/actualiza-secretaria-de-economia-referencias-a-cuatro-nom-ener?utm_source=chatgpt.com

India 印度

印度 DPIIT 允許部分 QCO 產品從 BIS 第一類方案過渡至第二類方案

DPIIT 於 2026 年 6 月 25 日發布《Facilitation（Quality Control）Order, 2026》（Transition Facilitation（Quality Control）Order, 2026），是針對屬於 Scheme I（ISI Mark）的 10 項強制性品質管制命令（QCO）的重要階段性過渡政策。

為已實施強制性 QCO 的特定產品提供一條「過渡性通道」，允許符合特定資格條件的製造商／供應商，在滿足嚴格的評估與合規前提下，取得特定許可，進而支持其在印度境內的供應鏈建立與過渡。

本命令並非全面取代既有的 QCO，而是適用於附件中列出的 10 類產品：

On June 25, 2026, DPIIT issued the “Transition Facilitation (Quality Control) Order, 2026,” a significant transitional policy for the 10 mandatory Quality Control Orders (QCOs) under Scheme I (ISI mark). This order provides a “transitional pathway” for certain products already subject to mandatory QCOs, allowing eligible manufacturers/suppliers to obtain specific licenses, subject to stringent assessments and compliance requirements, to support the establishment and transition of their supply chains within India. This order does not completely replace existing QCOs, but applies only to the 10 product categories listed in the annex:

參考連結： https://www.pib.gov.in/PressReleasePage.aspx?PRID=2278019&lang=2&reg=48&utm_source=chatgpt.com

Philippines 菲律賓

菲律賓發布太陽能系統強制性產品認證技術法規草案

【法規草案】菲律賓貿工部發布了《太陽能系統（包括太陽光電模組、變流器、電池儲能系統、快速關斷裝置、電池充電控制器和太陽光電電纜）強制性產品認證技術法規》草案。

該部門行政命令旨在確保擬於菲律賓進口、製造、經銷、銷售、安裝或使用的太陽能系統元件（包括太陽光電模組、變流器、電池儲能系統、快速關斷裝置、電池充電控制器和太陽光電電纜）符合適用的菲律賓國家標準（PNS）所規定的安全和品質要求。一旦實施，相關產品必須符合強制性標準並取得強制性認證。

Philippines DTI Department published draft Administrative Order “Technical Regulation for the Mandatory Product Certification of Solar Energy Systems, including Solar Photovoltaic (PV) Modules, Inverters, Battery Energy Storage Systems (BESS), Rapid Shutdown Devices, Battery Charge Controllers, and Photovoltaic (PV) Cables This Department Administrative Order (DAO) aims to ensure that components of solar energy systems, including solar photovoltaic (PV) modules, inverters, battery energy storage systems (BESS), rapid shutdown devices, battery charge controllers, and photovoltaic (PV) cables intended for importation, manufacture, distribution, sale, installation, or use in the Philippines, comply with prescribed safety and quality requirements in accordance with applicable Philippine National Standards (PNS). This is to safeguard consumers, ensure product reliability, and promote the adoption of safe and efficient solar energy technologies in the country. Once implemented, the products are required to comply with mandatory standards and obtain mandatory certificate. The draft regulation recieves comments till Jul-25 of 2026.

參考連結： https://www.epingalert.org/en/Search?viewData=%20G/TBT/N/PHL/368

Taiwan 台灣

台灣發布關於修訂七種電源設備（包括非車載式電動機車充電器）檢驗要求的提案

【法規草案】經濟部標準檢驗局（BSMI）預告修正電源供應設備類商品檢驗規定，涵蓋電動機車、電動自行車及電動輔助自行車用非車載式充電器、電動機車充電／換電系統，以及電動車交流、直流與複合式充電設備。修正重點包括新增「型式認可逐批檢驗」雙軌機制、擴大直流／複合式充電設備檢驗容量至 750 kW、導入 CNS 16272 資訊安全標準作為連網設備檢測依據，並調整貨品分類號列及RoHS 標示要求，以提升充電設備安全性及符合產業發展需求。

強制日期：

電動機車、自行車充電器及充電／換電系統：2027 年 7 月 1 日。

電動車交流充電設備（≤30 kW）及直流／複合式充電設備（≤30 kW）：2026 年 7 月 1 日。

電動車直流／複合式充電設備（>30 kW 至 750 kW）：2028 年 1 月 1 日。

The Bureau of Standards, Metrology and Inspection (BSMI), under the Ministry of Economic Affairs (MOEA), in view of the rising risk of international incidents involving electric motorcycles, electric bicycles, and electrically power-assisted bicycles, the Bureau of Standards, Metrology and Inspection (BSMI) proposes to expand the scope of legal inspection requirements for seven types of power supply equipment, including non-vehicle-mounted chargers for electric motorcycles. The proposed amendments primarily make available an alternative conformity assessment procedure for business operators to choose from. In addition, the scope of mandatory inspection for electric vehicle conductive DC/combo charging equipment is expanded from products not exceeding 30 kW to products not exceeding 750 kW.

參考連結： https://www.bsmi.gov.tw/wSite/public/Data/f1782789523970.pdf

Vietnam 越南

越南對高風險產品及貨物可追溯性進行規範

越南工業貿易部發布第 31/2026/TT-BCT 號通知，對高風險產品及貨物可追溯性進行規範。

該通知要求貿易商／進口商在越南工業貿易部監管的高風險產品入口網（https://www.verigoods.vn/

該通知自 2026 年 7 月 1 日起實施，過渡期至 2026 年 12 月 31 日結束。

高風險產品清單可參考 Circular No. 33/2026/TT-BCT：《公布工業貿易部管理之中風險及高風險產品與貨物清單》：https://moit.gov.vn/upload/2005517/fck/files/1_TT_2026_33_e6020.pdf

Vietnam Publishes Circular No. 31/2026/TT-BCT Regulations on product and goods traceability under the management of the Ministry of Industry and Trade. It requires the trader/importer to register the product identification for the high risk products regulated by Ministry of Industry and Trade to ensure traceability at web portal:

https://www.verigoods.vn/

It implements on Jul-1 of 2026 and transition period ends on Dec-31 of 2026. The list of high-risk products can be found in Circular No. 33/2026/TT-BCT: List of Medium-Risk and High-Risk Products and Goods Managed by the Ministry of Industry and Trade:

https://moit.gov.vn/upload/2005517/fck/files/1_TT_2026_33_e6020.pdf

參考連結： https://moit.gov.vn/van-ban-phap-luat/thong-tu-so-31-2026-tt-bct-quy-dinh-ve-truy-xuat-nguon-goc-san-pham-hang-hoa-thuoc-pham-vi-quan-ly-cua-bo-cong-thuong.html

China 中國

國家認監委關於發布電動自行車、童車類產品、玩具強制性產品認證實施規則的公告

為嚴格強制性產品認證監管，國家認監委現修訂發布《強制性產品認證實施規則 電動自行車（試行）》（CNCA-C11-16:2026）、《強制性產品認證實施規則 童車類產品（試行）》（CNCA-C22-01:2026）、《強制性產品認證實施規則 玩具（試行）》（CNCA-C22-02:2026）。

自本公告發布之日至 2026 年 10 月 31 日，認證機構可根據認證委託人意願，按照舊版實施規則或新版實施規則展開 CCC 認證活動；2026 年 11 月 1 日起，應按照新版實施規則展開 CCC 認證活動。已頒發的有效強制性產品認證證書可繼續使用，認證證書轉換工作採取產品變更、到期換證等自然過渡方式完成。

To strictly regulate mandatory product certification, the Certification and Accreditation Administration of the People’s Republic of China (CNCA) has revised and issued the following regulations:

− Implementation Rules for Compulsory Product Certification: Electric Bicycles (Trial) (CNCA-C11-16:2026)

− Implementation Rules for Compulsory Product Certification: Children’s Vehicles (Trial) (CNCA-C22-01:2026)

− Implementation Rules for Compulsory Product Certification: Toys (Trial) (CNCA-C22-02:2026).

From the date of this announcement until October 31, 2026, certification bodies may conduct CCC certification activities according to the old or new implementation rules, based on the wishes of the certification clients. From November 1, 2026, CCC certification activities must be conducted according to the new implementation rules. Valid mandatory product certification certificates already issued may continue to be used. Certificate conversion will be completed through a natural transition process, such as product change or renewal upon expiration.

參考連結： https://www.cnca.gov.cn/hlwfw/ywzl/qzxcprz/tzgg/art/2026/art_8c3c6f4802fe4be8a47d08629f9acd7a.html

資訊 / 電信 ITE / Telecom

Argentina 阿根廷

阿根廷國家網路安全中心發布網路安全法規

阿根廷國家網路安全中心於 2026 年 5 月 11 日頒布第 1/2026 號規定（DI-2026-1-APN-CNC#JGM），並於 2026 年 5 月 13 日刊登於官方公報。該規定核准一項技術法規，該法規確立國家公共部門應急計畫政策和備用資料處理中心開發與實施的基本要求和特徵。

該法規旨在強化數位韌性，並保護關鍵國家基礎設施，使其與 NIST、ISO 等國際最佳實務接軌。

Provision 1/2026 (DI-2026-1-APN-CNC#JGM), enacted on May 11, 2026, and published in the Official Gazette on May 13, 2026, approves the Technical Regulation establishing the essential requirements and characteristics for the development and implementation of contingency plan policies and alternative data processing centers for the National Public Sector.

The regulation aims to strengthen digital resilience and protect critical state infrastructure, to be aligned with international best practices such as NIST and ISO.

參考連結： https://www.boletinoficial.gob.ar/detalleAviso/primera/341893/20260513

Bahamas 巴哈馬

巴哈馬URCA發佈2026-2029年國家頻譜規劃

2026 年 5 月 6 日，巴哈馬公用事業監管與競爭管理局（URCA）發布 2026–2029 年國家頻譜規劃。

On May 6, 2026, the Utensility Regulation and Competition Authority (URCA) of the Bahamas released the 2026-2029 National Spectrum Plan.

參考連結：https://urcabahamas.bs/wp-content/uploads/2026/05/National-Spectrum-Plan-2026-2029-ECS-04-2026-6May2026.pdf

Belize 貝里斯

貝里斯PUC發布2026年國家頻譜分配表

2026 年 5 月 6 日，貝里斯公共事業委員會（PUC）正式發布 2026 年國家頻譜分配計畫。

On May 6, 2026, the Belize Public Utilities Commission (PUC) officially released the 2026 National Spectrum Allocation Plan.

參考連結：https://www.puc.bz/wp-content/uploads/2026/05/Belize-National-Spectrum-Allocation-Plan-2026.pdf

Brazil 巴西

巴西 ANATEL 發布新版行動通訊訊號增強產品（直放站）技術法規

2026 年 4 月 30 日，巴西國家電信管理局（ANATEL）發布第 5885 號法令，核准適用於個人行動通訊服務（SMP）之室內訊號增強產品（即直放站）的技術要求，以及技術符合性評估測試程序。該法令已於 2026 年 4 月 30 日生效，並取代第 2271 號法令。

On April 30, 2026, Brazil’s National Telecommunications Authority (ANATEL) issued Decree No. 5885, which approved the technical requirements and technical conformity assessment testing procedures for internal signal enhancement products (i.e., repeaters) used for personal mobile services (SMP). This decree came into effect on April 30, 2026, replacing Decree No. 2271.

參考連結：https://informacoes.anatel.gov.br/legislacao/component/content/article/94-atos-de-certificacao-de-produtos/2141-ato-5885

Chile 智利

智利SUBTEL更新短距離設備技術標準

2026 年 5 月 27 日，智利電信主管機關 SUBTEL 發布第 966 號決議，更新 2017 年第 1.985 號短距離設備（SRD）技術標準。主要修訂內容包括：

•  調整 QR Code 合規標籤要求：為便於應用於更多元的設備，放寬 QR Code 的尺寸與設計限制。不再強制限定特定形狀或固定尺寸，大小與形式改由責任方自行決定，但須確保其符合正確讀取與運作的最低必要條件（建議符合 ISO/IEC 18004 標準）。

•  優化保密測試報告提交方式：新增替代提交管道，允許透過虛擬收件辦公室提交保密版測試報告，並可透過官方電子郵件寄送相關編號與設備資訊，以加速審查流程。

•  新增醫療設備頻段規範：導入工作於 9–315 kHz 頻段、極低功率的「主動式植入醫療設備」技術規範，並限制 10 公尺處的電場強度不得超過 30 dBµA/m（或等效的 dBµV/m）。

On May 27, 2026, Chile’s SUBTEL issued Resolution No. 966, updating the technical standard for short-range devices (SRD) No. 1.985 of 2017. The main revisions include:

•  Adjusting QR code compliance labeling requirements: To facilitate application on more diverse devices, QR code size and design restrictions have been relaxed. No longer mandatory restrictions on specific shapes or fixed dimensions; sizes and forms are now determined by the responsible party themselves, but must ensure they meet the minimum requirements for correct reading and operation (recommended compliance with ISO/IEC 18004);

•  Optimized submission method for confidential test reports: Added alternative submission channels, allowing submission of confidential test reports via virtual receiving offices, and sending related serial numbers and device information via official email to speed up review;

•  New medical device frequency band specification: Introduces technical specifications for “active implantable medical devices” operating in the 9-315 kHz frequency band at extremely low power, limiting the electric field strength at 10 meters to no more than 30 dBμA/m (or equivalent dBuV/m).

參考連結：https://www.bcn.cl/leychile/navegar?idNorma=1224558

China 中國

中國工業和資訊化部發布《電器電子產品有害物質限制使用達標管理目錄（2026 年版）》公告

《電器電子產品有害物質限制使用達標管理目錄（2026 年版）》（以下簡稱《達標管理目錄》）及《達標管理目錄限用物質應用例外清單（2026 年版）》（以下簡稱《例外清單》）自 2026 年 5 月 28 日起實施。工業和資訊化部 2018 年第 15 號公告發布的《電器電子產品有害物質限制使用達標管理目錄（第一批）》及《達標管理目錄限用物質應用例外清單》，自本公告發布日起廢止。

納入《達標管理目錄》的產品，其有害物質含量應依目錄所列要求時程，符合電器電子產品有害物質限制使用要求之相關標準，並納入電器電子產品有害物質限制使用合格評定制度管理範圍。列入《例外清單》的項目，則可依清單所列相應要求執行。

The ‘Compliance Management Catalogue for the Restriction of Hazardous Substances in Electrical and Electronic Products (2026 Edition)’ (hereinafter referred to as the ‘Compliance Management Catalogue’) and the ‘List of Exceptions to the Restricted Substances in the Compliance Management Catalogue (2026 Edition)’ (hereinafter referred to as the ‘List of Exceptions’) shall come into force on 28 May 2026. The “Catalogue for Compliance Management of the Restriction of Hazardous Substances in Electrical and Electronic Products (First Batch)” and the “List of Exceptions for the Application of Restricted Substances in the Compliance Management Catalogue”, issued in Announcement No. 15 of 2018 by the Ministry of Industry and Information Technology, shall be repealed as of the date of publication of this Announcement.

For products included in the *Compliance Management Catalogue*, the content of hazardous substances shall comply with the relevant standards on the restriction of hazardous substances in electrical and electronic products by the deadlines specified in the Catalogue, and such products shall be subject to the conformity assessment system for the restriction of hazardous substances in electrical and electronic products. Products listed in the *List of Exceptions* may be managed in accordance with the corresponding requirements set out in the List.

參考連結：https://www.miit.gov.cn/zwgk/zcwj/wjfb/gg/art/2026/art_1abc7a6cb7d64e4e976cd454aa1df81e.html

Cuba 古巴

古巴MIC實施1/2026號及2/2026號決議

2026 年 6 月 2 日，古巴通訊部（MIC 或 MINCOM）正式頒布第 1/2026 號及第 2/2026 號決議，全面取代舊有法規，並明確區分個人用途與商業用途之設備進口規範。主要內容包括：

•  新法規明定，用於轉售、商業化或在地製造的電信及無線產品（如手機、雷達、廣播接收器等，詳見通知附件 I），必須取得型式認可（Homologation）證書及技術授權證書。

•  型式認可證書為技術授權證書的前置條件。針對測試、展示或個人使用的樣品，可豁免型式認可證書，但須於入境前 30 天申請臨時技術授權，有效期為 3 個月。

•  原則上須於當地實驗室進行測試；但針對超出當地測試能力的設備，MIC 允許接受製造商或國際實驗室出具的測試報告。

•  付清費用並完成測試後，核准證書將於 10 個工作日內核發，有效期為 5 年。

•  新規亦指定無線電話的工作頻段為 45/48 MHz、1.9 GHz、2.4 GHz 及 5.8 GHz。

On June 2, 2026, the Cuban Ministry of Communications (MIC or MINCOM) officially issued Resolutions 1/2026 and 2/2026, fully replacing the old regulations and strictly distinguishing between the import of personal and commercial equipment. The main contents include:

•  The new regulations specify that telecommunications and wireless products used for resale, commercialization, or local manufacturing (such as mobile phones, radars, broadcast receivers, etc., see Annex I of the notice) must obtain type approval (Homologation) certificates and technical authorization certificates;

•  Type approval certificates are prerequisites for technical authorization certificates. For testing, display, or personal use samples, the type approval certificate can be exempted, but temporary technical authorization must be applied for 30 days before entry, valid for 3 months;

•  In principle, testing must be conducted in local laboratories, but for equipment beyond local testing capacity, MIC allows acceptance of manufacturer or international laboratory test reports;

•  Approval certificate is issued within 10 working days after payment and testing is completed, with a validity period of 5 years;

•  The new regulations also specify the operating frequency bands for cordless telephones as 45/48MHz, 1.9GHz, 2.4GHz, and 5.8GHz.

參考連結：https://www.gacetaoficial.gob.cu/sites/default/files/goc-2026-ex66.pdf

Eurasian Economic Union 歐亞經濟聯盟

歐亞經濟聯盟提出 TR EAEU 048/2019能效法規修訂草案

【法規草案】歐亞經濟聯盟能源效率技術法規 TR EAEU 048/2019 預計將於 2028 年 9 月 1 日實施。

在正式實施前，歐亞經濟聯盟已提出該法規的修訂草案。主要修訂內容包括：

•  修訂受管制產品清單

•  新增 EAC 能效標籤範例

EAEU Technical Regulation TR EAEU 048/2019 on Energy Efficiency is expected to be implemented on Sep-1 of 2028.

Before the implementation date, EAEU proposes draft amendment to the regulation. The key amendment is:

•  Revise regulated product list

•  Add EAC energy label example

參考連結：https://epingalert.org/en/Search?documentSymbol=G%2FTBT%2FN%2FKAZ%2F37&viewData=G%2FTBT%2FN%2FKAZ%2F37&utm_source=chatgpt.com

India 印度

印度 MeitY 將獨立硬碟納入 BIS 管制範圍

2026 年 5 月 5 日，印度電子資訊技術部（MeitY）於《印度政府公報》發布 S.O. 2204(E) 號公告，修訂 2021 年《電子資訊技術產品（強制註冊要求）令》（CRO）。此次修訂明確將獨立硬碟（HDD）納入印度標準局（BIS）管理的強制註冊框架。原有 USB 介面的外接式硬碟仍保留於現行 BIS 監管框架內。修訂後的獨立硬碟（HDD）監管要求將於 2026 年 11 月 5 日生效。

On May 5, 2026, India’s Ministry of Electronics and Information Technology (MeitY) issued Announcement S.O. 2204(E) in the Government Gazette of India, amending the 2021 Electronic Information Technology Products (Requirement for Compulsory Registration) Order (CRO). This revision explicitly incorporates standalone hard disk drives (HDDs) into the mandatory registration framework managed by the Bureau of Standards of India (BIS). The external hard drive with the original USB interface remains within the current BIS regulatory framework. The revised regulatory requirements for standalone hard disk drives (HDDs) will take effect on November 5, 2026.

參考連結：https://www.bis.gov.in/wp-content/uploads/2026/05/Electronics-and-Information-Technology-Goods-2021-Amendment-Standalone-Hard-Disk-Drives-1.pdf

印度發布 SIM 卡與 IP 安全設備基本要求標準修訂版

印度於 2026 年 4 月 16 日發布通知，修訂以下電信設備標準：

•  TEC 40162602 – SIM 卡基本要求標準

•  TEC 34732602 – IP 安全設備基本要求標準

現行標準與修訂後標準將並行有效 90 天。自 2026 年 7 月 15 日起，僅修訂後標準生效。

India issued a notification on April 16, 2026, revising the following standards for telecommunications equipment:

•  TEC 40162602 – Standard for Essential Requirements – SIM

•  TEC 34732602 – Standard for Essential Requirement – IP Security Equipment

The current and revised standards will both remain in force for 90 days. Starting July 15, 2026, only the revised standards will be in force.

參考連結：https://egazette.gov.in/WriteReadData/2026/271859.pdf

印度 DoT 豁免 77–81 GHz 頻段雷達（SRD）系統許可要求

2026 年 6 月 11 日，印度電信部（DoT）發布針對 77–81 GHz 頻段車載雷達系統運作的相關規定。當此類系統安裝於車輛上，並用於無線電定位目的時，可免於辦理許可程序。在符合技術限制的前提下，無須另行取得許可，即可使用、銷售或租賃此類系統。

該規定針對功率、發射頻寬及雜散發射等項目設定限值。除非同型號產品已完成型式認可，否則須透過電信部（DoT）入口網站申請設備型式認可。系統必須符合適用的印度標準或相關國際標準。若發生干擾，使用者可能被要求降低功率、調整設備位置，或採取其他矯正措施。

On June 11, 2026, the Indian Ministry of Telecommunications (DoT) issued regulations for vehicle-mounted radar systems operating in the 77–81 GHz band. When such systems are installed on vehicles for radio positioning purposes, licensing procedures are exempted. Provided technical limitations are met, these systems can be used, sold, or leased without separate licenses. This regulation sets limits on power, transmit bandwidth, and stray emissions. Unless the same model has already been approved for the same model, the device model approval must be applied for through the Ministry of Telecommunications (DoT) portal. The system must comply with applicable Indian standards or relevant international standards. If interference occurs, users may be required to reduce power, adjust equipment position, or take other corrective actions.

參考連結：https://www.dot.gov.in/static/uploads/2026/06/d44ff2aec0505d538d9f3d51eba88936.pdf

Kenya 肯亞

肯亞發布 2026 年版《電子通訊設備型式認可條例》

肯亞發布 2026 年版《電子通訊設備型式認可條例》。除型式認可法規外，肯亞亦於 2026 年 5 月在其官方網站發布共計 16 項 2026 年版法規。法規列表如下：

https://ict.go.ke/kica-regulations-documents-2026

Kenya publishes Type Approval of Electronic Communications Equipment) Regulations 2026 version.

Besides Type Approval regulations, Kenya uploaded 16 regulations in total for 2026 version to its official website in May of 2026. Regulations list is here:

https://ict.go.ke/kica-regulations-documents-2026

參考連結：https://ict.go.ke/sites/default/files/2026-05/27-03-26%20Type%20Approval%20Regulations%202026%20clean%20copy.pdf

Mauritius 模里西斯

模里西斯ICTA 計畫淘汰3G網路

2026 年 5 月 28 日，模里西斯資訊與通訊技術管理局（ICTA）發布新聞公報，宣布模里西斯將逐步淘汰 3G 服務。行動網路業者已開始退場 3G 網路，並確認 2028 年後將不再提供 3G 行動服務。ICTA 呼籲社會大眾停止進口及使用僅支援 3G 的設備，並鼓勵採用 4G LTE、5G 等較新的通訊技術。

On May 28, 2026, the Information and Communication Technology Authority (ICTA) of Mauritius issued a press release announcing plans to phase out 3G services in Mauritius. Mobile network operators have begun phasing out 3G networks and confirmed that 3G mobile services will no longer be offered after 2028. ICTA calls on the public to stop importing and using devices that only support 3G, and encourages the adoption of newer technologies such as 4G LTE and 5G.

參考連結：https://www.icta.mu/documents/2026/05/communique_sunsetting28May.pdf

Malaysia 馬來西亞

馬來西亞 SIRIM 修訂通訊設備認證協定

2026 年 6 月 3 日，SIRIM 於其官網發布編號 SQASI/CMCS/1/26/0005 公告，宣布修訂《通訊、多媒體及混合設備合規審批認證協定》（eTAC/DOC/01-1），重點更新「轉讓（Assignment）」條款。新規已於 2026 年 6 月 1 日生效。

原申請人已簽署的舊版協定仍然有效；但所有新申請人必須透過官網下載最新版，並將兩份已簽署的紙本正本郵寄或親送至 SIRIM QAS 辦公室。

On June 3, 2026, SIRIM published an announcement on its official website numbered SQASI/CMCS/1/26/0005, announcing revisions to the “Communication, Multimedia, and Hybrid Equipment Compliance Approval and Certification Agreement” (eTAC/DOC/01-1), with a focus on updating the “Assignment” clause. The new regulations took effect on June 1, 2026. The old agreement signed by the original applicant remains valid, but all new applicants must download the latest version from the official website and mail or present two signed original paper documents to the SIRIM QAS office in person.

參考連結：https://ecomm.sirim.my/Announcement_Details_New.aspx

馬來西亞發布用於串流媒體播放與內容傳輸之電視盒技術法規草案

【法規草案】馬來西亞通訊及多媒體委員會（MCMC）與馬來西亞技術標準論壇（MTSFB）於 2026 年 5 月發布《TECHNICAL CODE – SECURE AND AUTHORISED TV BOXES FOR STREAMING AND CONTENT DELIVERY》技術法規草案。

本技術規範明定電視盒在技術規格、安全性及合規性方面的最低要求，以確保串流媒體播放與內容傳輸安全且合法。其目的亦在於防止此類設備支援、促成或協助非法存取內容服務。

The Malaysian Communications and Multimedia Commission (MCMC) and the Malaysian Technical Standards Forum (MTSFB) released a draft technical regulation entitled “TECHNICAL CODE – SECURE AND AUTHORISED TV BOXES FOR STREAMING AND CONTENT DELIVERY” in May 2026.

This Technical Code specifies the minimum requirements for the technical specifications, security, and compliance of TV boxes to ensure secure and authorised streaming and content delivery. It also aims to prevent such devices from supporting, enabling, or facilitating illicit access to content services.

參考連結：https://mtsfb.org.my/wp-content/uploads/2026/05/PC_Secure-and-Authorised-TV-Boxes-for-Streaming-Content-Delivery.pdf

Mexico 墨西哥

墨西哥發布《2026–2030 年國家無線電頻譜規劃》

墨西哥發布《2026–2030 年國家無線電頻譜規劃》，確立以高效、公平且具包容性的方式管理無線電頻譜之公共政策優先事項，旨在擴大全國電信、廣播、寬頻及網際網路接取服務。

該規劃設定三大目標：促進基礎設施部署與互聯互通；支援為原住民及非裔墨西哥人社群提供可持續的電信與廣播服務；並透過新技術、共享／動態頻譜使用、衛星服務、監理沙盒，以及強化有害干擾監測等方式，推動頻譜管理現代化。

Mexico published the National Radio Spectrum Program 2026–2030, establishing public policy priorities for efficient, equitable and inclusive management of the radio spectrum to expand telecommunications, broadcasting, broadband and internet access nationwide.

The Program sets three main objectives: promote infrastructure deployment and connectivity, support sustainable telecom and broadcasting services for Indigenous and Afro-Mexican communities, and modernize spectrum management through new technologies, shared/dynamic spectrum use, satellite services, regulatory sandboxes and stronger monitoring against harmful interference.

參考連結：https://www.dof.gob.mx/nota_detalle.php?codigo=5787695&fecha=18/05/2026

Saudi Arabia 沙烏地阿拉伯

沙烏地阿拉伯 SASO 修訂並以新標準 SASO 3114:2026 取代 CST 規範 GEN002

沙烏地阿拉伯標準組織（SASO）已修訂相關規範，並以新標準 SASO 3114:2026《特定資訊與通訊技術設備要求》取代 CST 規範 GEN002。

依據上述規定，相關產品必須符合更新後標準 SASO 3114:2026 的實施要求，寬限期至 2026 年 10 月 31 日止。

寬限期結束後，自 2026 年 11 月 1 日起，本通知涵蓋的產品若未符合更新後要求，將不再核發任何合格證書。

另請注意，依據標準編號 SASO CITC GEN-002 簽發的有效合格證書及出貨證書，將於 2027 年 3 月 31 日前停止使用。

SASO has revised and replaced the CST specification GEN002 with the new Saudi Standard SASO 3114:2026 – Requirements for Specific ICT Equipment.

Based on the above, relevant products are required to comply with the implementation of the updated standard specification SASO 3114:2026, with a grace period granted until October 31st, 2026.

After the end of the grace period, no issuance of any certificate of conformity for the products covered by this circular unless they meet the updated requirements, starting from 01/11/2026.

Please be informed that the Certificates of Conformity and Shipment Certificates that are valid and issued based on Standard No. (SASO CITC GEN-002) shall be discontinued no later than 31/03/2027.

參考連結：https://e.saso.gov.sa/content/wasif-service/details/SASO/Njc1ODk%3D?stdName=SASO-3114

Serbia 塞爾維亞

自 2027 年 1 月 1 日起，塞爾維亞將直接認可無線電設備的 CE 標誌及歐盟符合性聲明

塞爾維亞近期發布無線電設備法規英文版。該法規本身並未更新，僅新增英文版本供參考。

提醒：自 2027 年 1 月 1 日起，塞爾維亞將直接認可無線電設備的 CE 標誌及歐盟符合性聲明（DoC），不再需要塞爾維亞國家 RATEL 符合性證書（CoC）及 3A 標誌。

Recently Serbia publishes English version of Regulation on Radio Equipment. There is no update for the regulation itself. Just English version for reference.

Reminder: Starting from Jan-1 of 2027, Serbia directly accepts CE Marking and EU DoC for radio equipment, the Serbia National RATEL CoC and 3A marking will be no longer required for radio equipment. ​

參考連結：https://www.ratel.rs/storage/upload/2026/04/Rulebook-on-radio-equipment.pdf

Singapore 新加坡

新加坡發布住宅閘道安全要求技術規範草案

【法規草案】新加坡發布住宅閘道安全要求技術規範草案。

此次修訂將提高住宅閘道的強制性網路安全要求，以保護通訊網路及家庭物聯網設備免受網際網路安全威脅。

Singapore publised draft Technical Specification – Security Requirements for Residential Gateways.

This revision will raise mandatory cybersecurity requirements for Residential Gateways to safeguard both the Communication Networks and the home IoT devices from security threats on the Internet.

參考連結：https://www.imda.gov.sg/-/media/imda/files/regulation-licensing-and-consultations/ict-standards/telecommunication-standards/imda-technical/2026/draft-imda-ts-rg-sec-issue-2-april-for-public-comment.pdf

新加坡發布《資訊通訊媒體發展局法》擬議修正案

【法規草案】2026 年 5 月 6 日，《資訊通訊媒體發展局法》（IMDA 法）擬議修正案已提交國會。這些擬議修正案旨在強化媒體產業的競爭與消費者保護監理框架，並使其與電信產業的監理框架一致。修正案將強化資訊通訊媒體發展局（IMDA）的監理力道，以確保媒體產業公平競爭、維護消費者權益，並為產業利害關係人提供更明確的監理指引。

主要修正案包括：

•  擴大對媒體產業所有權及控制權變更的監理範圍

•  賦予主管機關更即時的介入權限，以確保公平且高效的市場行為

•  簡化非重大交易的處理程序

•  對《電信法》進行相關修正

為維持一致性，《電信法》亦將進行修正。相關術語及交叉引用將同步更新，以配合《資訊通訊媒體發展局法》的修正內容。

Proposed amendments to the Info-communications Media Development Authority Act (“IMDA Act”) were tabled in Parliament on May 06, 2026. The proposed amendments are a targeted set of updates to help strengthen the competition and consumer protection regulatory framework for the media sector and align it with that for the telecommunication sector. The amendments will enhance regulatory oversight by the Infocomm Media Development Authority (IMDA) to ensure fair competition in the media sector, safeguard consumers’ interests and offer greater regulatory clarity to industry stakeholders.

The key amendments include:

•  Broadening the oversight of ownership and control changes in the media sector

•  Powers for more timely intervention to ensure fair and efficient market conduct

•  Streamlined treatment of immaterial transactions

•  Related amendments to the Telecommunications Act (TA)

Amendments will also be made to the TA for alignment purposes. Terminology and cross-references will be updated to be consistent with changes to the IMDA Act.

參考連結：https://www.imda.gov.sg/resources/press-releases-factsheets-and-speeches/factsheets/2026/amendments-to-imda-act

South Africa 南非

南非ICASA發布3800–4200 MHz及5925–6425 MHz動態頻譜接取最終法規

2026 年 5 月 22 日，南非獨立通訊管理局（ICASA）發布關於 3800–4200 MHz 及 5925–6425 MHz 頻段動態頻譜接取與機會性頻譜管理的最終法規。此次改革旨在促進寬頻接取、鼓勵創新、改善頻譜共享，並推動新市場參與者進入市場。

儘管該法規已發布，目前尚未生效。生效日期將由南非獨立通訊管理局（ICASA）於後續官方通告中公布。此外，即使是在免執照的 6 GHz 頻段，設備仍須通過認證，營運商也必須透過南非無線電服務系統（USS），遵守註冊與協調要求。

On May 22, 2026, ICASA (Independent Communications Authority of South Africa) published its final regulations on dynamic spectrum access and opportunistic spectrum management in the 3800–4200 MHz and 5925–6425 MHz bands. This reform aims to promote broadband access, encourage innovation, improve spectrum sharing, and facilitate the entry of new market players.

Although the regulation has been published, it has not yet entered into force. The effective date will be announced later by ICASA in an official notice. Furthermore, even in the license-exempt 6 GHz band, equipment will still need to be certified, and operators will have to comply with registration and coordination requirements via the USS.

參考連結：https://www.gov.za/documents/notices/electronic-communications-act-regulations-dynamic-spectrum-access-and?utm_source=chatgpt.com

Taiwan 台灣

BSMI發布電機電子類商品型式認可作業要點

BSMI 於 2026 年 5 月 20 日發布電機電子類商品型式認可作業要點，並自發布日起生效。

BSMI Published Instruction Guidances for Type Approval of Electrical and Electronic Products, on May 20, 2026 and took effect immdiately.

參考連結：https://www.bsmi.gov.tw/wSite/laws/review.jsp?lawId=2c9081fe1c7959a1011c87b78cb00357&mp=1

Thailand 泰國

泰國提出非特定用途二手雷達設備技術標準通知草案

【法規草案】泰國國家廣播和電信委員會已提出非特定用途二手雷達設備技術標準通知草案。該技術標準規定，工作於 24.05–24.25 GHz 頻段、最大輸出功率不超過 100 mW（20 dBm）e.i.r.p. 的非特定用途二手雷達設備，須符合最低技術特性要求。

該草案意見徵詢截止日期為 2026 年 7 月 17 日。

The National Broadcasting and Telecommunications Commission of Thailand has proposed the Draft Notification of the National Broadcasting and Telecommunications Commission regarding Technical Standard for Non-Specific Used Radar Equipment. The technical standard specifies the minimum technical characteristics required for Non-Specific used Radar equipment operating in the 24.05-24.25 GHz band, with a maximum output power not exceeding 100 mW(20 dBm) e.i.r.p.

The draft receives comments till July 17, 2026.

參考連結：https://epingalert.org/en/Search/Index?countryIds=C764&distributionDateFrom=2026-04-20&distributionDateTo=2026-05-22&viewData=G%2FTBT%2FN%2FTHA%2F805

泰國發布陸路交通與交通資訊雷達設備技術標準通知草案

【法規草案】泰國國家廣播和電信委員會已發布陸路交通與交通資訊雷達設備技術標準通知草案。該技術標準修訂車輛雷達的適用範圍，將陸路交通與交通資訊雷達納入其中，並將工作頻率範圍從 22.00–26.65 GHz 更新為 24.05–24.25 GHz，同時更新 76–77 GHz 陸路交通與交通資訊雷達發射機的雜散輻射限值。

該草案意見徵詢截止日期為 2026 年 7 月 17 日。

The National Broadcasting and Telecommunications Commission of Thailand has proposed the Draft Notification of the National Broadcasting and Telecommunications Commission regarding Technical Standard for Land Transport and Traffic Telematics Radar Equipment.

The technical standard revises the scope of vehicle radar to include land transport and traffic telematics radar, and updates the frequency allocations the operating range from 22.00–26.65 GHz to 24.05–24.25 GHz and the unwanted emission limits for 76–77 GHz land transport and traffic telematics radar transmitters.

The draft receives comments till July 17, 2026.

參考連結：https://epingalert.org/en/Search/Index?countryIds=C764&viewData=G%2FTBT%2FN%2FTHA%2F806

泰國發布 57–64 GHz 頻段非特定短程設備技術標準通知草案

【法規草案】泰國國家廣播和電信委員會已發布 57–64 GHz 頻段非特定短程設備技術標準通知草案。該技術標準規定，工作於 57–64 GHz 頻段的非特定短程設備，須符合最低技術特性要求，其最大輸出功率不得超過 100 mW（20 dBm）e.i.r.p.。

該草案意見徵詢截止日期為 2026 年 7 月 17 日。

The National Broadcasting and Telecommunications Commission of Thailand has proposed the Draft Notification of the National Broadcasting and Telecommunications Commission regarding Technical Standard for Non-specific Short Range Devices Equipment in 57-64 GHz band.

The technical standard specifies the minimum technical characteristics required for Non-specific Short Range Devices equipment operating in the 57-64 MHz band, with a maximum output power not exceeding 100 mW (20 dBm) e.i.r.p.

The draft receives comments till July 17, 2026.

參考連結：https://epingalert.org/en/Search/Index?countryIds=C764&distributionDateFrom=2026-04-20&distributionDateTo=2026-05-22&viewData=G%2FTBT%2FN%2FTHA%2F807

泰國發佈《無人機雷達設備技術標準草案》

【法規草案】泰國國家廣播和電信委員會已發布《無人機雷達設備技術標準草案》。該技術標準新增工作於 57–64 GHz 頻段、最大輸出功率不得超過 100 mW（20 dBm）e.i.r.p. 之無人機雷達設備要求。

該草案意見徵詢截止日期為 2026 年 7 月 17 日。

The National Broadcasting and Telecommunications Commission of Thailand has proposed the Draft Notification of the National Broadcasting and Telecommunications Commission regarding Technical Standard for Radar Equipment for Unmanned Aircraft.

The technical standard adds requirements for radar equipment for unmanned aircraft operating in the 57–64 GHz band, with a maximum output power not exceeding 100 mW (20 dBm) e.i.r.p.

The draft receives comments till July 17, 2026.

參考連結：https://epingalert.org/en/Search/Index?countryIds=C764&viewData=G%2FTBT%2FN%2FTHA%2F808

泰國發布《關於行動衛星業務中配備衛星地面站系統之無人機設備技術標準通知草案》

【法規草案】泰國國家廣播和電信委員會已發布《關於行動衛星業務中配備衛星地面站系統之無人機設備技術標準通知草案》。該技術標準規定，配備衛星地面站系統之無人機設備，若工作頻率為 1610–1660.5 MHz（發射，地對空通訊）及 1518–1559 MHz（接收，空對地通訊），須符合最低技術特性要求。

該草案意見徵詢截止日期為 2026 年 7 月 17 日。

The National Broadcasting and Telecommunications Commission of Thailand has proposed the Draft Notification of the National Broadcasting and Telecommunications Commission regarding Technical Standard for Unmanned Aircraft Equipment with Satellite Earth Station Systems in the Mobile-Satellite Service.

The technical standard specifies the minimum technical characteristics required for unmanned aircraft equipment with satellite earth station systems operating in the 1610 – 1660.5 MHz for transmit (Earth-to-space) and 1518 – 1559 MHz for receive (space-to-Earth).

The draft receives comments till July 17, 2026.

參考連結：https://epingalert.org/en/Search/Index?countryIds=C764&distributionDateFrom=2026-04-20&distributionDateTo=2026-05-22&viewData=G%2FTBT%2FN%2FTHA%2F809

Vietnam 越南

越南MST發布兩則頻譜調整通函

2026 年 5 月 31 日，越南科學技術部（MST）發布兩則關於行動通訊頻譜調整的通函，分別為：

•  第 27/2026/TT-BKHCN 號通函，將於 2026 年 7 月 16 日起實施。該通函將 470–606 MHz 劃配給地面數位電視業務；MST 可核准 606–694 MHz 頻段內地面數位電視業務許可證的申請或展延，但最長僅至 2028 年 12 月 31 日。期間若 MST 正式發布書面通知，確認 606–694 MHz 頻段開始用於行動通訊，所有仍將該頻段用於地面數位電視業務的單位，須自收到通知之日起 6 個月內，無條件完成轉換至其他合規頻段，例如 470–606 MHz。

•  第 29/2026/TT-BKHCN 號通函，將於 2026 年 9 月 16 日起實施。該通函將 890–915 MHz 作為上行頻段、935–960 MHz 作為下行頻段，可用於 3G、4G 及 5G 行動通訊，其中 3G 可使用至 2028 年 9 月 14 日。

On May 31, 2026, the Ministry of Science and Technology (MST) of Vietnam issued two circular notices regarding the adjustment of mobile communication spectrum, which are:

•  Circular No. 27/2026/TT-BKHCN will take effect from July 16, 2026. The circular allocated 470-606 MHz to terrestrial digital TV services; MST may approve applications or extensions for terrestrial digital TV business licenses within the 606-694 MHz band, but the latest is December 31, 2028. If MST officially issues a written notice confirming that the 606-694 MHz band will begin mobile communications, all units still using this band must unconditionally complete the conversion to other compliant bands (such as 470-606 MHz) within 6 months of receiving the notification;

•  Circular No. 29/2026/TT-BKHCN, which will take effect from September 16, 2026. The circular designates 890-915 MHz as the uplink band and 935-960 MHz as the downlink band, which can be used for 3G, 4G, and 5G mobile communications, with 3G available until September 14, 2028.

家用電器 House Appliances

Australia & New Zealand 澳洲與紐西蘭

澳洲與紐西蘭提出熱泵熱水器（HPWH）能效要求建議

《能源效率評估報告》（DRIS）建議導入 MEPS（最低能效標準），以提升澳洲與紐西蘭此類熱水器的能源效率。

《能源效率評估報告》建議分兩階段實施：

第一階段：在澳洲與紐西蘭儘快導入最低能效標準（MEPS）。

第二階段：在就具體要求及實施時程進行進一步諮詢後，導入能效標示要求，預計於 2028 年實施。

在導入 MEPS 三年後，將對 MEPS 要求進行檢討。

The DRIS recommends the introduction of minimum energy performance standards to improve the energy efficiency of these water heaters in Australia and New Zealand.

The recommendations of the DRIS will be implemented under a two-stage approach:

Stage 1: Introduce minimum energy performance standards (MEPS) in Australia and New Zealand as soon as practicable.

Stage 2: Introduce labelling requirements (likely to be 2028), after further consultation on the specific requirements and implementation timeframe.

After a period of 3 years from the introduction of MEPS conduct a review of the MEPS requirements.

參考連結：https://www.energyrating.gov.au/industry-information/publications/decision-ris-energy-efficiency-heat-pump-water-heaters

Ecuador 厄瓜多

厄瓜多發布「無管道空調能源效率」第三次修訂

厄瓜多共和國宣布頒布第 MPCEI-SC-2026-0067-R 號決議，其中包含技術法規 RTE INEN 072（3R）「無管道空調能源效率」第三次修訂內容。

無論其於官方註冊簿上的公布日期為何，該法規已於 2026 年 4 月 30 日生效。

The Republic of Ecuador announces the issuance of Resolution No. MPCEI-SC-2026-0067-R, which contains the Third Revision of the Technical Regulation RTE INEN 072 (3R), ‘Energy efficiency for ductless air conditioners.’

This regulation will enter into force on April 30, 2026, regardless of its date of publication in the Official Registry.

參考連結：https://eping.wto.org/en/Search?viewData=%20G/TBT/N/ECU/394/Rev.2/Add.1

Nigeria 奈及利亞

奈及利亞強制性能源標示計畫將分階段實施

奈及利亞強制性能源標示計畫要求產品符合最低能效標準 （MEPS）並粘貼能效標示。進口產品的符合性評定由國際認可機構（IAF）執行，IAF 亦負責奈及利亞 SONCAP PVoC 計畫的合格評定。

受管制產品及實施情形概述如下：

a.  自願實施階段

第一階段範圍內的電器產品可選擇進行認證，以便儘早達到合規要求，認證期間自產品上市日起至 2026 年 12 月止。

b.  強制實施第一階段

全面強制執行，要求第一階段範圍內的所有電器產品在 2026 年 12 月前，須黏貼能效標示，方可進入市場。

c.  強制實施第二階段

全面強制執行，要求第二階段範圍內的所有電器產品在 2026 年 12 月前必須黏貼能效標籤才能進入市場。

Labeling Scheme includes to comply with MEPS (minimum energy performance standards) and affix energy label. The conformity assessment for imported products shall be performed by IAF (International Accredited Firms), which is the same to perform conformity assessment for Nigeria SONCAP PVoC program. The overview of regulated products and implementation status as folllowing:

a.  Voluntary Implementation Phase

Optional certification period for early compliance for appliances within Phase I scope, from launch till December 2026.

b.  Mandatory Implementation Phase I

Full enforcement requiring all appliances within Phase I scope to display energy labels for market access by December 2026.

c.  Mandatory Implementation Phase II

Full enforcement requiring all appliances within Phase II scope to display energy labels for market access by December 2026.

參考連結：https://son.gov.ng/son-mandatory-energy-labeling-scheme/

Taiwan 台灣

台灣發布《冰溫熱型飲水供應機節能標章能源耗用基準與標示方法》修正

經濟部能源署修正「冰溫熱型飲水供應機節能標章能源耗用基準與標示方法」，並同步調整名稱及能源效率評估規定。修正內容包括更新適用範圍、能源耗用試驗條件及計算方式，明確規範24小時備用損失 （E24）之量測與判定標準，並要求實測值及標示值均不得超過能源耗用基準值。此外，強化節能標章標示要求，規定產品或包裝須揭露廠商資訊及能源耗用數據，以提升節能資訊透明度並促進高效率產品推廣。

The Energy Administration, Ministry of Economic Affairs (MOEA), has revised the Energy Consumption Criteria and Labeling Requirements for Energy Label Certification of Cold-Hot Drinking Water Dispensers, while renaming the regulation to cover drinking water supply machines. The amendments update the scope of application, testing conditions, and calculation methods for energy consumption. They clarify the measurement and compliance requirements for 24-hour standby energy loss (E24), requiring both measured and declared values to remain within the prescribed limits. The revision also strengthens labeling requirements by requiring manufacturer information and energy consumption data to be disclosed on products or packaging, improving transparency and promoting the adoption of energy-efficient products.

參考連結：https://gazette.nat.gov.tw/EG_FileManager/eguploadpub/eg032105/ch04/type2/gov31/num9/Eg.pdf

能源效率要求 Energy Efficiency Requirements

China 中國

中國發布投影機能源效率標示備案相關材料

中國能源效率標示網站發布投影機能源效率標示備案相關材料。

China Energy Label website published a Zipped file of necessary documents for projector products energy label registration.

參考連結：https://www.energylabel.com.cn/detail?typeId=15&id=357

Singapore 新加坡

2026 年 7 月 1 日起，新加坡「自用進口」耗能產品全面納入能效管理

新加坡正式通過《Energy Conservation (Amendment) Act 2026, No. 10 of 2026》，主管機關新加坡國家環境局（National Environment Agency, NEA）同步發布官方通告（Ref: NEA-LSD-CIRCULAR-ECA-00002-2026），並提交 WTO TBT 通報（G/TBT/N/SGP/77）。

自 2026 年 7 月 1 日起，最低能源性能標準（MEPS）與強制性能源標示（MELS）將全面延伸至由終端使用者或企業「進口供自用（Own Use）」的受管制商品。不論是工廠固定資產或商用專案設備，若未依法完成註冊即進口，均屬違法，最高可處 10,000 新元（SGD）罰鍰。

首波自用進口受管制商品與海關編碼（HS Code）對照表：

核心摘要：

1.  自用進口規費全免，但採獨立註冊制：針對進口自用的企業，NEA 豁免商品註冊與展延費，並直接採信符合國際標準（如 IEC）的海外原廠能效測試報告。但法規規定「認證不共用」，各企業必須針對相同型號產品分別辦理 ELS 線上登記。

2.  電商平台負有連帶法律責任：新法（Section 78）賦予主管機關強制要求電商平台下架或更正違規線上廣告的權力。網路銷售通路的合規審查與驗證數據比對需求將大幅增加。

Singapore has officially passed the Energy Conservation (Amendment) Act 2026 (Act No. 10 of 2026). The National Environment Agency (NEA) has concurrently issued an official circular (Ref: NEA-LSD-CIRCULAR-ECA-00002-2026) and submitted a WTO TBT notification (G/TBT/N/SGP/77).

Effective July 1, 2026, the Minimum Energy Performance Standards (MEPS) and Mandatory Energy Labelling Scheme (MELS) will be fully extended to regulated goods imported by end-users or enterprises for “Own Use”. Whether for factory fixed assets or commercial project equipment, failure to complete registration prior to import constitutes an offense and is subject to a maximum fine of SGD 10,000.

First Wave of Regulated Goods for “Own Use” Import and HS Code Cross-Reference Table:

Key Highlights:

1.  Registration Fees Waived for Own Use, but Subject to Individual Registration: For enterprises importing for own use, NEA will waive the product registration and renewal fees, and directly accept energy efficiency Test Reports from overseas manufacturers/factories that comply with international standards (such as IEC). However, the regulation dictates an “independent registration principle”—certifications cannot be shared, and each enterprise must independently register the same model under its own ELS account.

2.  Joint Liability for E-commerce Platforms: The new legislation (Section 78) empowers authorities to compel e-commerce platforms to remove or correct non-compliant online advertisements. This will significantly increase the demand for compliance screening and verification data matching across online sales channels.

參考連結：https://sso.agc.gov.sg/Acts-Supp/10-2026/Published/20260511?DocDate=20260511

South Korea 韓國

韓國發布能源效率管理設備運作規定更新

韓國發布能源效率管理設備運作規定更新 （氣候能源環境部公告 No. 2026-137）；

1.  強化能源效率管理設備（MEPS）之能源效率標準，適用品項包括電風扇、乾衣機及家用瓦斯鍋爐。

2.  新增能源效率管理設備（MEPS）適用品項，包括氣炸鍋及印表機。

施行日期：

本能源效率管理設備（MEPS）運作規定自2026年5月29日公告日起施行。

但有關電風扇、家用瓦斯鍋爐、乾衣機、氣炸鍋及印表機之修訂事項，其施行日期如下：

1.  家用瓦斯鍋爐、乾衣機： 自2026年10月1日起施行。

2.  電風扇、氣炸鍋、印表機： 自2027年1月1日起施行。

適用規定：

•  關於家用瓦斯鍋爐及乾衣機之修訂規定，適用於2026年10月1日以後製造之產品。

•  關於電風扇、氣炸鍋及印表機之修訂規定，適用於2027年1月1日以後製造之產品。

•  第1項及第2項所稱產品，包括於國外製造後進口之產品，均以產品製造日期為判定基準。

South Korea has released updated regulations for the operation of energy efficiency management devices (Ministry of Climate, Energy and Environment Announcement No. 2026-137):

1.  Enhanced efficiency standards for energy efficiency management devices (MEPS) (electric fans, clothes dryers, household gas boilers).

2.  Added new items to be covered by MEPS (air fryers, printers).

Effective Date: These regulations for the operation of energy efficiency management devices (MEPS) took effect on May 29, 2026, the date of this announcement.

However, the effective dates for the revisions concerning electric fans, household gas boilers, clothes dryers, air fryers, and printers are as follows:

1.  Household gas boilers and clothes dryers: Effective October 1, 2026.

2.  Electric fans, air fryers, and printers: Effective January 1, 2027.

Applicable Regulations:

The revised regulations concerning household gas boilers and clothes dryers apply to products manufactured on or after October 1, 2026.

•  The revised regulations concerning electric fans, air fryers, and printers apply to products manufactured on or after January 1, 2027.

•  The products referred to in paragraphs 1 and 2 include products manufactured abroad and then imported; the manufacturing date shall be the determining factor.

參考連結：https://eep.energy.or.kr/pds/view.aspx?no=201&cate=4

Taiwan 台灣

台灣發布《空氣壓縮機容許耗用能源基準與能源效率分級標示事項、方法及檢查方式》修正內容

經濟部修正「空氣壓縮機容許耗用能源基準與能源效率分級標示事項、方法及檢查方式」，自116年7月1日生效。

•  擴大管制範圍：調整出口壓力管制範圍。

•  基準調整：提高可變轉速迴轉式空氣壓縮機能效基準，並新增液冷式產品的計算公式。

•  行政優化：刪除光碟檢送方式，推行電子化申請，並強化主管機關抽樣檢測與見證測試權限 。

•  文字修正：明確規範對象為供國內使用者，並將「公司」修正為「廠商」以符合法規體例。

The Ministry of Economic Affairs(MOEA) announced amendments of “Requirements on Minimum Energy Performance Standard and Energy Efficiency Rating Labeling and Inspection for Air Compressors” (amendment shall become effective from 1st, July 2027). Key updates include:

•  Expanded Scope: Adjusting the discharge pressure range

•  Enhanced Standards: Raising the Minimum Energy Performance Standards (MEPS) for variable-speed rotary compressors and introducing calculation formulas for liquid-cooled models.

•  Administrative Changes: Discontinuing the use of CD-ROMs for report submissions in favor of digital processes, and granting authorities the power to perform sampling and witnessed testing before registration.

•  Clarifications: Adding “for domestic use” to specify the regulated products and standardizing legal terminology (e.g., changing “company” to “manufacturer”).

參考連結：https://gazette.nat.gov.tw/EG_FileManager/eguploadpub/eg032105/ch04/type1/gov31/num8/Eg.pdf

電池 / Batteries

China 中國

中國國家認監委發布關於新增行動電源等強制性產品認證依據標準，並發布新版實施規則的公告

強制性國家標準 GB 47372—2026《移動電源安全技術規範》已發布，將於 2027 年 4 月 1 日實施。涉及認證實施規則之變更如下：

1.  新增 GB 47372—2026 作為行動電源、行動電源用鋰離子電池及電池組的 CCC 認證依據標準。

2.  修訂發布《強制性產品認證實施規則 行動電源、鋰離子電池及電池組（試行）》。

3.  自 2027 年 4 月 1 日起，應依新版實施規則辦理 CCC 認證活動。已依舊版實施規則取得 CCC 認證的行動電源、行動電源用鋰離子電池及電池組，應於 2027 年 4 月 1 日前依新版實施規則要求，完成證書轉換。

The mandatory national standard GB 47372—2026, ‘Technical Specifications for the Safety of Portable Power Banks’, has been published and will come into force on 1 April 2027. The changes to the certification implementation rules are as follows:

1.  GB 47372—2026 has been added as the standard for CCC certification of power banks, lithium-ion batteries for power banks, and battery packs.

2.  The ‘Implementation Rules for Compulsory Product Certification: Power Banks, Lithium-ion Batteries and Battery Packs (Trial)’ have been revised and published.

3.  From 1 April 2027, CCC certification activities shall be conducted in accordance with the new version of the Implementation Rules. Portable power banks, lithium-ion batteries for portable power banks and battery packs that have already obtained CCC certification under the previous version of the Implementation Rules shall complete the conversion of their certificates in a timely manner in accordance with the requirements of the new version of the Implementation Rules before 1 April 2027.

參考連結：https://www.cnca.gov.cn/hlwfw/ywzl/qzxcprz/tzgg/art/2026/art_29efd9c22ba14fea80926995d496baac.html

Malaysia 馬來西亞

馬來西亞發布最新版《電池儲能系統安全指南》

2026 年 5 月 22 日，馬來西亞能源委員會（ST, Energy Commission）於其官方網站資源庫正式發布最新版《電池儲能系統安全指南》（Guidelines on Battery Energy Storage System (BESS) Safety），旨在達成以下目標：

a.  依據 1990 年《電力供應法》（第 447 號法案）要求，明定電池儲能系統（BESS）的電氣安全要求；

b.  概述 BESS 應用之相關標準；

c.  闡明相關各方在 BESS 設計、安裝、運轉及維護方面的角色、職能與責任；

d.  規定與 BESS 要求相關之其他事項。

On May 22, 2026, the Energy Commission of Malaysia (ST) officially released the latest “Guidelines on Battery Energy Storage System (BESS) Safety” in its official website.

These guidelines are issued by the Commission for the following objectives:

a.  to specify the electrical safety requirements of Battery Energy Storage System (BESS) in accordance with the requirements under the Electricity Supply Act 1990 [Act 447];

b.  to outline the relevant standards of BESS application;

c.  to set out the roles, functions and responsibilities of the relevant parties in relation to BESS’s design, installation, operation and maintenance;

d.  to provide for any other matters which may be or incidental to the requirement of BESS.

參考連結：https://www.st.gov.my/sites/default/files/2026-05/Guidelines-on-Battery-Energy-Storage-System-%28BESS%29-Safety_0.pdf

Mexico 墨西哥

墨西哥發布關於將儲能系統併入國家電力系統的一般行政規定

墨西哥聯邦官方公報（DOF）發布法令，導入將儲能系統（SAEE）併入墨西哥國家電力系統的一般行政規定，重點聚焦電網穩定性及運轉彈性。

這些法規由國家能源委員會（CNE）監督執行，並依據儲能系統的併網方式，將其分類為自用型（視為發電廠）或負荷中心，以確保符合電網容量及運轉調度控制要求。

Decree in the Official Gazette of the Federation (DOF) introduces General Administrative Provisions for integrating Electrical Energy Storage Systems (SAEE) into Mexico’s National Electric System, focusing on grid stability and operational flexibility.

The regulations, overseen by the National Energy Commission (CNE), classify storage systems based on their integration as either self-consumption (treated as power plants) or load centers, ensuring compliance with grid capacity and operational dispatch control.

參考連結：https://dof.gob.mx/nota_detalle.php?codigo=5785045&fecha=16/04/2026#gsc.tab=0

燈具 / LED Luminaiaries/LED

Taiwan 台灣

台灣預告廢止《應施檢驗螢光燈管（泡）商品之相關檢驗規定》

經濟部標準檢驗局 (BSMI) 預告廢止「應施檢驗螢光燈管 （泡）商品之相關檢驗規定」，適用產品包括熱陰極螢光燈管、安定器內藏式螢光燈泡及緊密型螢光燈管。廢止原因係配合聯合國《水俁公約》對含汞產品之管理趨勢，以及環境部規劃禁止輸入含汞產品政策，螢光燈管（泡）未來將逐步退出市場，因此無繼續列為應施檢驗商品之必要。

The Bureau of Standards, Metrology and Inspection (BSMI), under the Ministry of Economic Affairs (MOEA), has proposed repealing the mandatory inspection requirements for fluorescent lamps, including hot-cathode fluorescent tubes, self-ballasted fluorescent lamps, and compact fluorescent lamps (CFLs). The proposal aligns with the global trend of restricting mercury-containing products under the Minamata Convention and supports Taiwan’s planned ban on the importation of mercury-containing products. As fluorescent lighting products are expected to be phased out from the market, maintaining mandatory inspection requirements is no longer considered necessary.

參考連結：https://www.bsmi.gov.tw/wSite/public/Data/f1780558455392.pdf

其他 / 多主題產品 Others / Products with Multiple Subjects

Chile 智利

智利第 60 號法令關於 USB Type-C 統一充電介面制度，已於 2026 年 5 月 13 日正式刊登於官方公報

智利已於 2026 年 5 月 13 日發布通告，確認於 2025 年 7 月 31 日頒布的第 60 號法令已正式公布。

該法令旨在建立行動設備及其充電器之間的通用互通性，要求手機、平板電腦及筆記型電腦等特定設備，必須使用 USB-C 介面作為充電標準。

該法令亦依據國際標準制定技術規則，並要求供應商明確標示是否包含充電器，以及設備的充電規格。

The Republic of Chile informs that Decree No. 60 of the Ministry of Economy, Development and Tourism, issued on July 31, 2025, has been published.

The notified Regulation establishes common interoperability between mobile devices and their chargers, requiring certain equipment such as phones, tablets and laptops to use the USB-C port as the standard for charging.

It also defines technical rules based on international standards and requires providers to clearly indicate whether a charge is included and the device’s charging specifications.

參考連結：https://eping.wto.org/en/Search?viewData=%20G/TBT/N/CHL/726/Add.1

智利發布多個產品的認證草案

【法規草案】智利共和國通報，以下產品認證協定草案已發布：

•  Protocol PC No. 17:2026 – 燃氣熱水器安裝套件

•  Protocol PE No. 6/10:2026 – 鏈鋸

•  Protocol PE No. 8/12:2026 – 可擕式電源

•  Protocol PE No. 1/45:2026 – 家用空氣清淨機

The Republic of Chile hereby notifies the publication of draft analysis and/or test protocol for below products:

•  Protocol PC No. 17:2026 – Gas installation kit for water heaters.

•  Protocol PE No. 6/10:2026 – Chainsaws

•  Protocol PE No. 8/12:2026 – Portable Power Station

•  Protocol PE No. 1/45:2026 – Household Air purifier

China 中國

自 2026 年 5 月 1 日起，中國 1,071 項國家標準開始實施

自 2026 年 5 月 1 日起，中國 1,071 項國家標準開始實施。其中包括行動通訊終端可靠性技術要求、燃氣輸配設備安全、家用電動洗衣機、全新風除濕機、教育機器人、行動學習終端等重要國家標準，將為引領及規範新興產業與未來產業發展、保障公共安全、保護消費者權益等面向提供標準支撐。

From May 1, 2026, 1701 national standards start to take effect. For example:

•  《Technical requirements and test methods for reliability of mobile telecommunication terminal》(GB/T 46367—2025)

•  《Household and similar electrical washing machine》(GB/T 4288—2025)

•  《Fresh air dehumidifiers》(GB/T 20109—2025)

•  《Educational robots—Safety requirements and testing methods》(GB/T 33265—2025)

•  《Information technology—Learning, education and training—Function requirements for mobile learning terminals》(GB/T 46348—2025)

•  《Technical specification of safety sign for energy storage station》(GB/T 46371-2025)

參考連結：https://www.sac.gov.cn/xw/bzhdt/art/2026/art_2ff71ee587cb41c8876744cf6edd8436.html

中國新能源汽車動力電池溯源資訊平台正式上線

中國新能源汽車動力電池國家溯源資訊管理平台正式上線。

該平台旨在滿足《新能源汽車廢舊動力電池回收管理暫行辦法》第五章中關於「資訊管理」的要求。

平台正式啟用後，動力電池供應鏈上的所有利害關係人，均須上傳涵蓋電池全生命週期的資料，包括製造、車輛安裝、銷售、報廢、回收及再利用等環節。平台透過為每個動力電池單元分配唯一識別碼（ID），確保整體流程具備完整可追溯性。

平台網址：https://www.barrp.cn/tbrat#/home

The National Platform for Traceability Information Management of New Energy Vehicle Traction Batteries has been officially launched.

This platform was developed to meet the “”Information Management”” requirements specified in Chapter 5 of the Provisional Measures for the Administration of Recycling and Utilization of Waste Traction Batteries from New Energy Vehicles.

With the platform now in operation, all stakeholders within the traction battery supply chain must upload data covering the entire life cycle of the batteries, including manufacturing, installation in vehicles, sales, retirement, recycling, and reuse. By assigning unique identification codes (IDs) to each traction battery unit, the platform ensures comprehensive traceability throughout the entire process.

Platform URL: https://www.barrp.cn/tbrat#/home

參考連結：https://std.samr.gov.cn/gb/search/gbDetailed?id=1BC23A0E5EE4EC59E06397BE0A0A70AC

India 印度

印度提出「區域網路電纜」基本要求 （ER）草案

【法規草案】印度提出「區域網路電纜」基本要求（ER）草案。

該草案開放公眾意見徵詢，截止日期為 2026 年 6 月 28 日。

India proposesraft Essential Requirements (ER) for “LAN Cable”.

The draft recieves comments till Jun-28 of 2026.

參考連結：https://tec.gov.in/pdf/consultations/IT_draft_ER_LAN_Cable_apr_26.pdf

South Africa 南非

南非出口前符合性評定計畫（PVoC）新方案

南非出口前符合性評定計畫（PVoC）新方案已於 2026 年 3 月 20 日以第 54374 號政府公報正式啟動。

該計畫要求自指定國家進口至南非的特定非管制產品，必須檢附符合性證書，以確認其符合適用的南非國家標準（SANS）。強制執行將自 2026 年 9 月 20 日開始，第一階段適用於自中華人民共和國進口的產品。

該計畫特別適用於未列入國家強制性規範監理機構（NRCS）強制執行之強制性規範範圍內的產品。

South Africa New Scheme – Pre-Export Verification of Conformity Programme (PVoC) is launched as Government Gazette No. 54374 published on 20 March 2026.

It requires that specified unregulated products imported into South Africa from designated countries be accompanied by a Certificate of Conformity confirming compliance with applicable South African National Standards (SANS). Mandatory enforcement begins 20 September 2026. Phase 1 applies to imports from the People’s Republic of China.

It applies specifically to products that do not fall under compulsory specifications enforced by the National Regulator for Compulsory Specifications (NRCS).

參考連結：https://pvoc.co.za/pvoc-programme/electrical-appliances/index.html

德國萊因TÜV認證 TÜV Rheinland Accreditation

United Arab Emirates 阿拉伯聯合大公國

德國萊因TÜV中東公司可為各類產品提供阿拉伯聯合大公國品質標誌(EQM) 自願認證服務

德國萊因TÜV中東公司現可為各類產品提供阿拉伯聯合大公國品質標誌 (EQM) 自願認證相關服務，從而更好地幫助客戶進入阿拉伯聯合大公國市場並提升其產品的信譽。
阿拉伯聯合大公國品質標誌 (EQM) 認證授予符合阿拉伯聯合大公國相關國家標準，並透過持續合規和工廠評估展現穩定品質的產品。針對非強制性產品類別，取得此標誌可為製造商和供應商帶來強大的競爭優勢。
如需瞭解更多資訊，請隨時聯繫我們。

TUV Rheinland Middle East as notified body under MoIAT can now support services related to the Voluntary Emirates Quality Mark (EQM) certification across a wide range of product categories which enables us to further support our clients in accessing the UAE market and enhancing the credibility of their products.
Emirates Quality Mark (EQM) is a certification granted to products that comply with relevant UAE national standards and demonstrate consistent quality through ongoing compliance and factory assessment.
Obtaining this mark for non-mandatory product categories provides a strong competitive advantage for manufacturers and suppliers.
TUV Rheinland Middle East can provide guidance on:

–  Applicable standards and regulatory requirements

–  End-to-end support with the application and certification process

–  Coordination with MoIAT

–  Assistance with documentation, product testing, and factory audits

For further information, please feel free to contact us.

資訊 / 電信 ITE / Telecom

Australia 澳洲

澳洲發布最新版本標準AS/NZS 62368.1:2026

澳洲標準協會於 2026 年 3 月 6 日發布最新版標準 AS/NZS 62368.1:2026《音訊／視訊、資訊和通訊技術設備－第 1 部分：安全要求》。該標準即日起生效，並與 IEC 62368-1:2023（第 4.0 版）保持一致。

在為期三年的過渡期間，新版標準將與舊版 AS/NZS 62368.1:2022（IEC 62368-1:2018）並行適用，以協助產業順利導入。過渡期結束後，僅接受依據 AS/NZS 62368.1:2026 測試報告提出的申請。

依據 AS/NZS 62368.1:2022 核發的證書，在其原有效期內仍維持有效。

The Standards Australia published the latest standard, AS/NZS 62368.1:2026 – Audio/video, information and communication technology equipment – Part 1: Safety requirements, on March 6, 2026. The standard took effect immediately and is aligned with IEC 62368-1:2023 (Edition 4.0). The new edition will run in parallel with the previous version, AS/NZS 62368.1:2022 (IEC 62368-1:2018), during a three-year transition period to support industry adoption. After the transition period, only applications supported by test reports based on AS/NZS 62368.1:2026 will be accepted.
Certificates issued under AS/NZS 62368.1:2022 will remain valid until their original expiration dates.

參考連結： https://www.standards.org.au/standards-catalogue/standard-details?designation=as-nzs-62368-1-2026

澳洲《2025年網路安全 (智慧型設​​備安全標準) 規則》於2026年3月4日生效

經過12個月的過渡期之後，《2025年網路安全 (智慧型設​​備安全標準) 規則》於2026年3月4日生效，該規則對澳洲消費者購買的大多數智慧型設備，導入了強制性網路安全標準。
自2026年3月4日起生產，且多數用於個人、家庭或家用用途的智慧型設備，皆須符合新的最低網路安全要求。

The Cyber Security (Security Standards for Smart Device) Rules 2025 commenced on 4 March 2026, following a 12-month transition period. These Rules introduce mandatory cyber security standards for most smart devices acquired in Australia by a consumer.
Scope:
Most smart devices manufactured on and from 4 March 2026, and intended for personal, domestic or household use, must now meet new minimum cyber security requirements.
Devices excluded from the Rules include:

–  desktop computers

–  laptops

–  smartphones

–  tablet computers

*Complete list of exempted products is in section 8 of the Rules.
Products manufactured before 4 March 2026 are not required to comply with the security standards, as the security standards were not in effect on their date of manufacture. The obligation on suppliers to not supply non-compliant products will apply to products required to comply with the security standards.

參考連結： https://www.homeaffairs.gov.au/about-us/our-portfolios/cyber-security/security-standards-for-smart-devices

Ecuador 厄瓜多

厄瓜多電信監管局批准2026年國家頻率規劃 (7.0版)

厄瓜多電信監管局 (ARCOTEL) 批准了2026年國家頻率規劃 (7.0版)。

The Agencia de Regulación y Control de las Telecomunicaciones (ARCOTEL) of Ecuador approved theNational Frequency Plan 2026 (version 7.0).

參考連結： https://www.arcotel.gob.ec/wp-content/uploads/2026/03/anexo_1_res_03-02so-arcotel-2026_-1.pdf

Hong Kong 香港

香港於2026年4月公佈新的頻率分配表

香港通訊事務管理局辦公室於2026年4月公佈新的頻率分配表。

Hong Kong publishes its new table of Frequency Allocation in 2026 April.

參考連結： https://www.ofca.gov.hk/filemanager/ofca/en/content_144/hk_freq_table_en.pdf

India 印度

印度Meity公佈最新版系列分法 ⟪Series Guidelines for product falling under “IS/IEC 62368 : Part 1: 2023⟫

印度電子資訊技術部(Meity)公佈最新版系列分法 ⟪Series Guidelines for product falling under “IS/IEC 62368 : Part 1: 2023⟫ ，自2026 年 5 月 20 日公告日起已正式生效。
本指南規範 IS/IEC 62368-1:2023 標準下之 BIS CRS認證系列劃分原則：

•  家族與抽樣：單一系列上限 10 個型號，每 10 款抽 1 款測試 (特定產品類別另有明確規定者除外)。主檢型號須為安全設計中風險最高的「最不利配置」。

•  外殼一致性：防火與絕緣外殼材料必須相同 。允許微小尺寸或按鍵位置變更，但安全距離與結構完整性不得低於主檢型號 。

•  能源與冷卻：絕緣等級與能量源分級（ES/PS/TS）必須一致 。風扇主動冷卻與散熱片被動冷卻不可合併於同一系列。

•  供電與電路：市電、外接電源、純電池供電不可合併於同一系列。關鍵充電電路與 BMS 參數之 PCB Layout 必須相同 。

•  排除與元件：智能手錶有無 SIM 卡、設備有無螢幕/觸控，皆須拆分為不同系列 。成品內含之受控關鍵零部件，必須獨立取得 CRO 註冊 。
詳細內容請參閱Meity發布的官方公告。

On May 20, 206, India Meity published the ⟪Series Guidelines for product falling under “IS/IEC 62368 : Part 1: 2023⟫ with immediate effect.
This summary outlines the series grouping guidelines under IS/IEC 62368-1:2023 for BIS CRS certification:

•  Family & Sampling: A maximum of 10 models per series is allowed, with 1 sample tested for every 10 models, unless there is a specifically prescribed for a particular product category. The worst-case configuration must be selected as the lead model.

•  Enclosure Uniformity: Materials for fire and electrical insulation enclosures must be identical. Minor dimensional or button location changes are permitted if safety distances and structural integrity are maintained.

•  Energy & Cooling: Models must share the same class of construction and energy source classifications (ES/PS/TS). Active fan cooling and passive heatsink cooling cannot be grouped together.

•  Power & Circuits: Mains-operated, external-source, and battery-powered configurations cannot be mixed. Power management, charging circuits, and BMS parameters must share the same PCB layout.

•  Exclusions & Components: Smartwatches with/without SIM, or devices with/without displays or touch features must be split into different series. All notified critical components require independent CRO registration.
For details, please visit the official circular released by Meity.

•  Family & Sampling: A maximum of 10 models per series is allowed, with 1 sample tested for every 10 models, unless there is a specifically prescribed for a particular product category. The worst-case configuration must be selected as the lead model.

•  Enclosure Uniformity: Materials for fire and electrical insulation enclosures must be identical. Minor dimensional or button location changes are permitted if safety distances and structural integrity are maintained.

•  Energy & Cooling: Models must share the same class of construction and energy source classifications (ES/PS/TS). Active fan cooling and passive heatsink cooling cannot be grouped together.

•  Power & Circuits: Mains-operated, external-source, and battery-powered configurations cannot be mixed. Power management, charging circuits, and BMS parameters must share the same PCB layout.

•  Exclusions & Components: Smartwatches with/without SIM, or devices with/without displays or touch features must be split into different series. All notified critical components require independent CRO registration.
For details, please visit the official circular released by Meity.

印度 BIS 發布 2026 年符合性評估修正條例，重塑合規紅線

印度 BIS 發布 2026 年符合性評估修正條例，重塑合規紅線。
印度標準局 (BIS) 於 2026 年 2 月 26 日正式發布公報《Bureau of Indian Standards (Conformity Assessment) Amendment Regulations, 2026》。本次兩大核心變更如下:

1.  證書效期與繳費模式變更: 首次核發與續展證書之有效期限延長至最高 5 年，但全面強制改為「按年預付費制」，持證人必須在每年的截止日前提前繳納年度規費

2.  取消通知寬限期: 取消過往證書暫停前 21 天的書面通知程式。一旦逾期未繳納年費，證書將將自動暫停，且不再另行通知。

BIS Issues Conformity Assessment Amendment Regulations, 2026
On February 26, 2026, the Bureau of Indian Standards (BIS) released the official gazette notification of the “Bureau of Indian Standards (Conformity Assessment) Amendment Regulations, 2026.” Two critical updates are outlined below:

1.  Change in Validity and Payment Mode: “The licence shall be granted initially up to five years.”; “The requisite fee shall be paid in advance on an annual basis before the due date.”

2.  Elimination of Notice Period: “…except for the cases where licence shall stand suspended due to non-payment of annual fees for which, the provision of regulation 8 shall apply.”

印度發布《2026年空調及其相關零部件、全封閉壓縮機和溫度傳感控制器 (質量控制) 修訂法令》

印度於 2026 年 5 月 8 日發布了《2026年空調及其相關零部件、全封閉壓縮機和溫度感測控制器 (品質控制) 修訂法令》。該法令規定，當地空調與製冷設備及相關零組件製造商，進口指定貨物供自身生產組裝時，可豁免 BIS 強制認證。相關產品的豁免條件及其進口配額 (基於 2024-25 財年進口量的 30% 至 100% 不等) ，請參閱法令附表。
此項豁免自 2026 年 5 月 8 日起生效，至 2027 年 3 月 31 日止。當地製造商應針對附表第 (1) 欄中指定的貨物或物品建立每月記錄，並將該記錄書寫於公司正式抬頭信紙上，經其授權簽署人簽署後提交給相關主管機關；同時，製造商亦須向中央政府提交該貨物或物品的在地化 (國產化) 計畫書。
詳細資訊請參閱法令連結。

On May 8, 2026, India published the⟪ Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2026⟫. It exempts the specified goods from BIS certification when imported by a local manufacturer of air conditioning and refrigeration equipment and related parts for the purposes of its own manufacturing. The exemption criteria for products and their imported volume (ranging from 30% to 100% based on FY 2024-25 imports) refer to the TABLE in the Order.
The exemption is effective from May 8, 2026, until March 31, 2027. The local manufacturer shall maintain a monthly record of Goods or articles specified in column (1) of the TABLE and furnish the same to the authorities concerned in their letter head signed by its authorised signatory, and shall also submit a plan for indigenisation of Goods or articles to the Central Government.
For details, please refer to the official order.

參考連結： https://www.bis.gov.in/wp-content/uploads/2026/05/Air-Conditioner-and-its-related-Parts-Hermetic-Compressor-and-Temperature-Sensing-Controls-Quality-Control-Amendment-Order-2026-2.pdf

印度提出「NTP 伺服器」基本要求 (ER) 草案

[法規草案] 印度提出「NTP 伺服器」基本要求 (ER) 草案；該草案接受意見至 2026 年 6 月 15 日。

India proposes draft Essential Requirements (ER) for “NTP Server”; the draft recieves comments till Jun-15 of 2026.

參考連結： https://tec.gov.in/pdf/consultations/IT_draft_ER_ntp_server_apr_26.pdf

印度MeitY修訂2021 年《電子和資訊科技產品 (強制註冊要求)令》

印度Meity於2026年5月5日公告將原產品目錄中50項“USB Type External Hard Disk Drives” (USB 型外接硬碟)，擴充至「Standalone Hard Disk Drives” (獨立式硬碟)。
自 2026 年 11 月 5 日起，所有獨立式硬碟機 (包含USB Type) 將納入強制註冊令的適用範圍。

MeitY has issued an important amendment to the Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order, 2021. The key change is in S. No. 50 of the Schedule. Earlier, the notified product category was only “USB Type External Hard Disk Drives”. It has now been replaced with the broader term “Standalone Hard Disk Drives”.
The notification makes an important distinction:

•  USB Type External Hard Disk Drives will continue to be governed by the existing notified provisions.

•  All other standalone HDDs will come under the Compulsory Registration Order with effect from 5th November 2026.

參考連結： https://www.crsbis.in/BIS/app_srv/tdc/gl/docs/Gazette_Notification_Standalone_Hard_Disk_Drives_HDDs.pdf

印度提出 2.4 GHz、5 GHz 和 6 GHz 頻段設備的基本要求 (ER) 草案

[法規草案] 印度提出了 2.4 GHz、5 GHz 和 6 GHz 頻段設備的基本要求 (ER) 草案，草案徵求意見截止日期為 2026 年 6 月 6 日。

India proposes Essential Requirements (ER) No. TEC5943xxxx for Equipment Operating in 2.4 GHz, 5 GHz and 6 GHz Bands; the draft recieves comments till Jun-6 of 2026.

參考連結： https://tec.gov.in/pdf/consultations/10hrs_06042026_%20Equipment%20Operating%20in%202.4%20GHz,%205%20GHz%20and%206%20GHz%20Bands.pdf

印度發布關於5G核心節點MTCTE認證的通知

印度發布5G核心節點MTCTE認證的相關通知。自2026年7月1日起，主管機關核准由TEC指定的認證機構 (CAB) 提交針對完全虛擬化/軟體驅動型5G核心節點指定參數的測試報告。
對於其他參數，申請人需在MTCTE入口網站上傳符合性自我聲明，以證明其符合基本要求 (ER) 的相關參數，直至另行通知。

India publishes Notice on MTCTE Certification of 5G Core Nodes. The approval of competent authority is conveyed for submission of test reports from the TEC designated CABs in respect of the designated parameters of completely Virtualized/Software based 5G Core Nodes w.e.f. 01.07.2026.
For the other parameters, the applicant needs to upload Self-Declaration for Conformity against the applicable parameters of Essential Requirement (ER) on the MTCTE Portal, until further order. The said parameters shall be treated as Exempted.

參考連結： https://www.tec.gov.in/mandatory-testing-and-certification-of-telecom-equipments-mtcte

印度將啟用5925-6425 MHz頻段的合規要求截止日期延長至2026年7月5日

印度將 5925–6425 MHz 頻段合規要求的實施期限延長 3 個月，由原訂 2026 年 4 月 5 日延至 2026 年 7 月 5 日。

India extends 3 months for deadline for Compliance Requirements for Enabling 5925–6425 MHz Band. The deadline extends from Apr-5 of 2026 to Jul-5 of 2026,

參考連結： https://www.dot.gov.in/static/uploads/2026/04/2a29c2f120772710ad849ca2bf0e88e6.pdf

印度NCCS擴大了通訊安全要求 (CSR) 測試的範圍

印度國家通訊安全中心 (NCCS) 於 2026 年 3 月 27 日發布辦公備忘錄，擴大通訊安全要求 (CSR) 測試的範圍，將第六類設備和物聯網 ITSAR 納入適用範圍。車輛追蹤設備、智慧電錶和回饋設備這三種物聯網 ITSAR/設備被歸類為第六類。

The National Center for Communication Security (NCCS) of India issued an Office Memorandum on March 27, 2026, which expands the Scope of CSR (Communication Security Requirements) Testing to include Group VI devices and IoT ITSARs.
The three IoT ITSARs/devices viz. Vehicle Tracking Device, Smart Electricity Meter and Feedback device are grouped as Group VI. This group also shall be considered by SLR division for designating the TSTLs against a group of ITSARs/devices for CSR testing.

參考連結： https://nccs.gov.in/public/latest_updates/Amendment%20of%20OM%20for%20Expanding%20the%20scope%20of%20Gr%20VI%20CSR%20Testing%2027.03.2026%20(1).pdf

Indonesia 印尼

印尼公佈 2026 年無線電頻譜分配表

印尼通訊與數位部 (KOMDIGI) 已於 2026 年 2 月 24 日 正式發布關於《印尼無線電頻率頻譜分配表》的 2026 年第 8 號條例 (PERMEN NOMOR 8 TAHUN 2026)。
該條例在發布當日 (2026 年 2 月 24 日) 正式實施，並取代舊版的頻譜規劃表。本次更新主要為了與最新的國際頻譜規劃保持一致，調整了部分頻段的服務分配及相關註腳。

The Ministry of Communication and Digital Affairs of the Republic of Indonesia (KOMDIGI) officially issued Regulation No. 8 of 2026 (PERMEN NOMOR 8 TAHUN 2026) concerning the Table of Radio Frequency Spectrum Allocations for Indonesia on February 24, 2026.
This regulation came into effect immediately upon its issuance on February 24, 2026, officially replacing the previous spectrum allocation table. This update was primarily implemented to align with the latest international spectrum regulations, introducing modifications to specific band allocations and corresponding footnotes.

參考連結： https://s3.sertifikasi.postel.go.id/production/rumusan/2026/1774843279584016678_Peraturan%20Menteri%20Komdigi%20Nomor%208%20Tahun%202026%20tentang%20TASFRI%20(2).pdf

印尼KOMDIGI正式啟動700MHz和2.6GHz頻段頻譜拍賣

2026年4月23日，印尼通訊與數位事務部 (KOMDIGI) 正式啟動700MHz和2.6GHz頻段頻譜拍賣。此次頻譜拍賣將用於4G/5G網路，相關頻段如下：
700 MHz頻段 (低頻段，上行703-378MHz/下行758-793MHz): 將用於擴大網路覆蓋範圍，並提升偏鄉地區的訊號品質。
2.6GHz頻段 (中頻段，2500-2690MHz TDD): 該頻段主要用於高容量資料流程量，旨在提升都會地區的網路服務品質。

On April 23, 2026, Indonesia’s Ministry of Communications and Digital Affairs (KOMDIGI) officially launched the auction of spectrum for the 700MHz and 2.6GHz bands. This spectrum auction will be used for 4G/5G networks, with the following frequency bands:

•  700MHz band (low frequency band, uplink 703-378MHz / downlink 758-793MHz): will be used to expand network coverage and improve signal quality in rural areas.

•  2.6GHz band (mid-band, 2500-2690MHz TDD): This band is dedicated to high-capacity data traffic, aiming to improve network service quality in urban areas.

參考連結： https://portal.komdigi.go.id/kanal-publik/berita-kini/10141

沙烏地阿拉伯 Saudi Arabia

SASO 採納 IEC 62368-1 第 4 版

沙烏地阿拉伯標準組織 (SASO) 已採用 IEC 62368-1 第 4 版。IEC 62368-1 第 3 版 (IEC 62368-1:2018) 仍將持續有效，直至另行通知。

Saudi Arabian Standards Organization (SASO) has adopted the 4th edition of IEC 62368-1, as published on the platform.
As per the technical regulations, the applicable standards should align with the latest published editions.
The 3rd edition of IEC 62368-1 (IEC 62368-1:2018) will continue to be accepted until further notice.
Accordingly, test reports based on IEC 62368-1:2018 can be accepted for the time being. However, updated test reports in accordance with the 4th edition must be provided during the PCOC renewal process.

參考連結： https://e.saso.gov.sa/content/wasif-service/details/SASO/Njc3MDY%3D?stdName=SASO-IEC-62368-1

沙烏地阿拉伯發布《網路安全服務、產品和解決方案許可監管框架》草案

[法規草案] 沙烏地阿拉伯發布《網路安全服務、產品和解決方案許可監管框架》草案。該框架旨在透過明確被授權者的責任和義務，規範沙烏地阿拉伯境內網路安全服務和產品的提供，進而提高此類服務、產品和解決方案在提供予各類實體時的效率和品質。

Saudi Arabia issued Regulatory Framework for Licensing Cybersecurity Services, Products and Solutions.
This Framework aims to regulate the provision of cybersecurity services and products in the Kingdom through a regulatory framework that defines the responsibilities and obligations of the licensee, contributing to promoting the efficiency and quality of such services, products, and solutions during their delivery to various entities.

參考連結： https://istitlaa.ncc.gov.sa/en/Security/nca/rfcs/Pages/default.aspx

Sri Lanka 斯里蘭卡

斯里蘭卡暫停簽發型號核准豁免函

斯里蘭卡電信監管委員會 (TRCSL) 針對型號核准豁免函發布重要監管更新。
根據頻譜管理部門的最新說明，TRCSL 已通知，在另行通知之前，將暫停頒發型號核准豁免函。

Important regulatory update regarding Type Approval Exemption Letters issued by the Telecommunications Regulatory Commission of Sri Lanka (TRCSL).
As per the latest clarification received from Spectrum Management, TRCSL has informed that, until further notification, the issuance of Type Approval Exemption Letters is currently on hold.

Vietnam 越南

越南MST發布新合規指南14/2026/TT-BKHCN

2026年4月9日，越南科學技術部 (MST) 發佈了關於新版合規指南(14/2026/TT-BKHCN) 通知。通知的主要內容：

•  通知自2026年5月25日起生效；現有型式核准證書 (TAC)、符合性聲明 (DoC) 和合規標誌可在其有效期內繼續使用

•  對於手機基地台等ICT產品，近期仍須依據原有的30/2011/TT-BTTTT執行；預計MST將在2026年7月1日前發佈新的通告取代30/2011/TT-BTTTT，或發佈關於風險等級管理產品清單的新通告，新通告預計將正式廢止30/2011/TT-BTTTT，標誌著ICT產品認證管理權正式移交給STAMEQ

•  合規評估原則基於產品風險等級和QCVN中所示的TAC方法。依據方法2、3、5、6新簽發的TAC有效期由3年變更為5年；其中方法5被定義為型式試驗+生產過程評估，強化了對生產體系的審核要求，也就是要求工廠檢查

•  對於符合性聲明 (DoC)，申請人需要從MST轄下的國家標準計量品質委員會 (STAMEQ) 負責的國家標準、計量和品質資料庫中獲取合格評定通知

•  允許電子合規標籤 (eLabel)

•  新增自我評估報告格式，包含TAC和報告簽發人資訊

On April 9, 2026, the Ministry of Science and Technology (MST) of Vietnam issued a notice on the new version of the compliance guidelines (14/2026/TT-BKHCN).

The main contents of the notice:

•  The notice will take effect from May 25, 2026; Existing Type Approval Certificates (TACs), Declarations of Conformity (DoCs) and Marks of Compliance can continue to be used for the duration of their validity

•  For ICT products such as mobile phone and base stations, the original 30/2011/TT-BTTTT must still be implemented in the near future. It is expected that MST will issue a new notice before July 1, 2026 to replace 30/2011/TT-BTTTT, or issue a new notice on the list of risk level management products, which is expected to officially abolish 30/2011/TT-BTTTT, marking the official transfer of ICT product certification management rights to STAMEQ

•  The compliance assessment principle is based on the product risk level and the TAC method shown in the QCVN. According to methods 2, 3, 5, and 6, the validity period of the newly issued TAC has been changed from 3 years to 5 years; Method 5 is now defined as type test + production process evaluation, which strengthens the audit requirements for the production system, that is, requires factory inspection

•  For Declarations of Conformity (DoC), applicants need to obtain a conformity assessment notice from the national standards, metrology and quality database under the National Committee for Standards, Metrology and Quality (STAMEQ) under the MST

•  Allow electronic compliance labeling (eLabel)

•  Added a new self-assessment report format with TAC and report issuer information.

參考連結： https://mst.gov.vn/van-ban-phap-luat/25378.htm

Eurasian Economic Union 歐亞經濟聯盟

歐亞經濟聯盟發布關於機械的《技術法規TR CU 010/2011》的修訂案

歐亞經濟聯盟發布關於機械的《技術法規TR CU 010/2011》的修訂案。該修訂案主要涉及自走式車輛和專用拖車的列管產品範圍和要求。

EAEU publish amendment to Technical Regulation TR CU 010/2011 on Machinery. The amendment mainly focus on regulated product scope and requirements for self-propelled vehicles and special-purpose trailers.

參考連結： https://docs.eaeunion.org/documents/461/10603/

Russia 俄羅斯

俄羅斯新版平行進口規則於2026年5月27日生效

俄羅斯新版平行進口規則於2026年5月27日生效。光學、攝影、電影、測量、控制、精密、醫療儀器和設備；玩具、遊戲和運動器材被列入平行進口清單。
以下電腦和運算設備品牌被排除在平行進口清單之外：ACER, ADATA, AIC, APACER, ASUS, AToS, CISCO, Compal, FUJITSU, HEWLETT PACKARD(HP), HITACHI, HPE, HYNIX, IBM, 以及其他 (HS codes EAEU Foreign economic activity 8471 49000 0 and 8471 70)。
如需進口上述被排除的設備，需要獲得權利人的許可，或透過俄羅斯境內授權經銷商進行交易。排除電腦設備的原因是為了發展俄羅斯製造業並保護當地製造商。

New parallel import rules will come into force on May 27, 2026, and they have been approved by Order of the Ministry of Industry and Trade No. 4769 dated September 26, 2025.
Optical, photographic, cinematographic, measuring, control, precision, medical instruments and devices were added to the list of parallel imports.; toys, games, and sports equipment.
Excluded from the list of parallel imports are computer and computing equipment brands ACER, ADATA, AIC, APACER, ASUS, AToS, CISCO, Compal, FUJITSU, HEWLETT PACKARD(HP), HITACHI, HPE, HYNIX, IBM, and others (HS codes EAEU Foreign economic activity 8471 49000 0 and 8471 70).
To import the excluded equipment, you need permission from the copyright holder or delivery through an authorized distributor in Of Russia. The reason for the exclusion of computer equipment was the development of Russian production and the protection of domestic manufacturers.
Important conditions remain in force:

•  compliance with EAEU technical regulations

•  certificates/declarations of conformity

•  product labeling

•  if necessary, notification of the FSS and the license for the import of radio-electronic and high-frequency devices

•  the importer/seller is responsible for the guarantee and safety of the goods.

United Kingdom 英國

英國認可歐盟現行的21項產品法規要求，包括CE標誌和反向ε標誌

英國政府將認可歐盟現行的21項產品法規要求，包括CE標誌和反向ε標誌。適用法規清單: https://www.gov.uk/government/publications/product-regulations-by-sector-and-current-approaches-to-product-marking-ukca-and-ce-regimes/product-regulations-by-sector-and-current-approaches-to-product-marking-ukca-and-ce-regimes
企業仍可繼續使用 UKCA 標誌，將相關產品投放英國市場。這代表企業可依產品與市場需求，彈性選擇使用 CE 標誌或 UKCA 標誌進入英國市場。

UK Government will recognise current EU requirements, including the CE marking and reversed epsilon marking, for 21 product regulations. The regulations in scope are listed in page: https://www.gov.uk/government/publications/product-regulations-by-sector-and-current-approaches-to-product-marking-ukca-and-ce-regimes/product-regulations-by-sector-and-current-approaches-to-product-marking-ukca-and-ce-regimes
Businesses can also continue to use the UKCA marking to place relevant products on the GB market. This means that businesses will have the flexibility to use either the CE marking or the UKCA marking to place relevant products on the GB market.

參考連結： https://www.gov.uk/government/publications/product-regulations-by-sector-and-current-approaches-to-product-marking-ukca-and-ce-regimes/product-regulations-by-sector-and-current-approaches-to-product-marking-ukca-and-ce-regimes

家用電器 House Appliances

Mexico 墨西哥

墨西哥發布微波爐的能源效率標準草案

[法規草案] 墨西哥發布墨西哥官方標準草案 PROY-NOM-038-ENER-2025，《微波爐的能源效率：限值、測試方法和標籤》。
該墨西哥官方標準草案規範具燒烤功能的微波爐、組合式微波爐及類似電器應達到的功率和能源消耗值，以及適用的測試方法和標籤要求。

Mexico published draft Mexican Official Standard PROY-NOM-038-ENER-2025, Energy efficiency of microwave ovens. Limits, test methods and labelling.
The notified draft Mexican Official Standard establishes the power and power consumption values that are to be met by microwave ovens with grills, combination microwave ovens and similar appliances, along with applicable test methods and labelling requirements.

參考連結： https://eping.wto.org/en/Search?viewData=%20G/TBT/N/MEX/561

墨西哥發布商用洗衣機和洗烘一體機的能源效率標準草案

[法規草案] 墨西哥發布墨西哥官方標準草案 PROY-NOM-037-ENER-2025，即《商用洗衣機和洗烘一體機的能源效率》。
該草案規定了商用自動洗衣機和洗烘一體機的最低修正能源效率係數 (MEF) 和年耗電量，並制定了綜合用水係數 (IWF)。該標準在全國範圍內強制適用於所有為商用設計電器，例如自助洗衣店和住宅社區內使用的、可接受硬幣、刷卡或其他支付方式且最大容量為 226.5 公升的電器。

Mexico published draft Mexican Official Standard PROY-NOM-037-ENER-2025, Energy efficiency of commercial washing machines and washer-dryers.
The notified draft Mexican Official Standard sets out the minimum Modified Energy Factor (MEF) and annual electricity consumption for automatic commercial washing machines and washer-dryers, and establishes the Integrated Water Factor (IWF). It is mandatory throughout the country for appliances designed for commercial use, such as those found in laundrettes and residential complexes, that accept coins, cards or other forms of payment and have a maximum capacity of 226.5 litres.

參考連結： https://eping.wto.org/en/Search?viewData=%20G/TBT/N/MEX/562

墨西哥發布電熱水器綜合能源效率標準草案

[法規草案] 墨西哥發布《PROY-NOM-040-ENER-2025：電熱水器綜合能源效率草案》。
該草案規範家用和商用電熱水器應符合最低綜合能源效率水準，以及用於驗證合規性的測試方法，並定義了相關的使用者資訊標籤要求。

Mexico published draft Mexican Official Standard PROY-NOM-040-ENER-2025, Integrated efficiency for electric water heaters.
The notified draft Mexican Official Standard establishes the minimum integrated efficiency levels that are to be met by electric water heaters for household and commercial use, and the test methods to be used to verify compliance, and defines the relevant user information labelling requirements.

參考連結： https://eping.wto.org/en/Search?viewData=%20G/TBT/N/MEX/560

燈具 / LED Luminaiaries/LED

Brazil 巴西

巴西發布LED 燈以及燈具產品新規Ordinance No. 231/2026

巴西 Ordinance No. 231/2026 (2026年4月13日第231號法令) 是由巴西計量、品質和技術研究院 (Inmetro) 發布，為針對LED燈與LED燈具的統一技術法規。 該法規自發佈之日起生效，並設有分階段合規過渡期: 製造商/進口商需在18個月內全面符合新規，此後6個月起，僅允許銷售符合新規的產品；經銷商/零售商過渡期則為‌48個月。同時，舊法規Ordinance No. 69/2022將在48個月後廢止‌.
該法規涵蓋LED燈與燈具，並針對適用範圍，技術要求，合格評定，標示與包裝等面相進行重大調整。

Ordinance No. 231 of April 13, 2026 issued by INMETRO, which approves the Technical Quality Regulation and the Conformity Assessment Requirements for Lamps and Luminaires with LED Technology, is in force in Brazil.
The 18-month period, counted from the effective date of the ordinance, applies to manufacturers and importers, who must implement requirements and fully align products with the technical standards. 6 months after the 18-month period, to sell only compliant products in the Brazilian market. The 48 months period, counted from the enforcement date of this ordinance, applies to distributors and retailers, who must only sell LED lamps and luminaires that comply with this regulation. Ordinance No. 69 (2022) will be revoked after 48 months.
The Ordinance covers LED lamps and luminaires, and makes significant adjustments in terms of scope of application, technical requirements, conformity assessment, marking and packaging, etc.

Taiwan 台灣

BSMI 修正「應施檢驗照明燈具類商品之相關檢驗規定」

經濟部標準檢驗局 (BSMI) 修正「應施檢驗照明燈具類商品之相關檢驗規定」，新增移動感應式燈具、露營用途燈具等產品納入檢驗範圍，並更新固定式與可移動式燈具、燈串及神明燈之檢驗標準。修正內容包括導入新版CNS安全規範、藍光危害評估、LED驅動器要求，以及含二次鋰電池產品之安全測試與RoHS標示規定，同時強化讀寫作業檯燈之閃爍與照度要求，以提升照明產品安全與品質。

The Bureau of Standards, Metrology and Inspection (BSMI), under the Ministry of Economic Affairs (MOEA), has revised inspection requirements for lighting products, expanding the scope to include motion-sensor lamps and camping lights. Updated requirements cover fixed and portable luminaires, string lights, and altar lamps, incorporating revised CNS safety standards, blue-light hazard assessments, LED driver requirements, lithium battery safety testing, and RoHS labeling obligations. Additional performance requirements for reading lamps, including flicker and illuminance controls, have also been introduced to enhance product safety and quality.

參考連結： https://www.bsmi.gov.tw/wSite/public/Data/f1778136070843.pdf

Singapore 新加坡

新加坡NEA新增6種用於普通照明的含汞產品作為危險物質進行管控

新加坡國家環境局（NEA）於 2026 年 4 月 20 日發布正式通告，宣布將新增 6 種普通照明用含汞產品列為危險物質管制項目，並訂定具體淘汰時程。

On April 20, 2026, Singapore’s National Environment Agency (NEA) issued a formal notice announcing the addition of six mercury-containing products used in general lighting to the list of hazardous substances, and outlining a specific phase-out timetable.
Key points are as follows:

1.  Regulatory Basis and Background: This control measure is based on Singapore’s Environmental Protection and Management Act (EPMA) and the international Minamata Convention.

2.  Controlled Products and Phased Phase-out Timeline: The document identifies six mercury-containing fluorescent lamp products to be controlled and outlines a two-phase phase-out:

Phase 1 (from January 1, 2027): The import, export, and manufacture of the following four categories of products will be prohibited:

•  Compact fluorescent lamps with a power output greater than 30 watts.

•  Compact fluorescent lamps with non-integrated ballasts of specific specifications (≤30 watts, mercury content ≤5 mg/lamp tube).

•  Halogenated phosphate linear fluorescent lamps (subdivided by power).

•  Halogenated phosphate nonlinear fluorescent lamps.

Phase Two (effective January 1, 2028): The import, export, and manufacture of the following two categories of products are prohibited:

•  Linear fluorescent lamps using tri-phosphor powder.

•  Non-linear fluorescent lamps using tri-phosphor powder.
Inventory Handling: Inventory of the above-mentioned products imported before the two specified dates may continue to be used and sold locally until cleared.

3.  Customs Code and Product Code Updates: To align with the new control measures, the NEA has updated the customs codes and product codes for the relevant products.

4.  Revision of Existing Controlled Product Codes

參考連結： https://www.nea.gov.sg/docs/default-source/hs/2026-04-20-control-of-6-mercury-added-products-under-the-environmental-protection-and-management-act-1999.pdf

South Korea 韓國

關於擬議修訂三類電器安全標準的行政通知草案-螢光燈

韓國國家技術標準院(KATS)發布第2026-158號 -電氣用品安全標準3項修正案行政預告。

1.  修正理由: 為遵循《水俁公約》(Minamata Convention，國際環境公約)，修訂照明設備安全標準中部分有關汞 (水銀) 含量的規定。

2.  主要內容:

1)  修訂對象之電氣用品安全標準

–  KC 60968:內建安定器螢光燈-安全要求

–  KC 61195: 雙端燈頭螢光燈-安全

–  KC 61199: 單端燈頭螢光燈-安全

2)  調整螢光燈中汞(水銀)含量的標準規定。

3.  本修正草案意見徵詢至2026年7月27日止。

Korean Agency for Technology and Standards (KATS) Announcement No. 2026-158 – Administrative Notice of Proposed Amendments to Three Electrical Appliance Safety Standards.

1.  Reason for the Amendment: To comply with the Minamata Convention (an international environmental treaty), certain requirements regarding mercury content in the safety standards for lighting equipment are being revised.

2.  Key Amendments:

1.  Electrical Appliance Safety Standards Subject to Revision

–  KC 60968: Self-ballasted Fluorescent Lamps – Safety Requirements

–  KC 61195: Double-capped Fluorescent Lamps – Safety

–  KC 61199: Single-capped Fluorescent Lamps – Safety

2.  Main Revision: Revision of the mercury content limits specified for fluorescent lamps.

3.  Comments on this draft amendment will be collected until July 27, 2026.

參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=1&cid=26313

RoHS

Ukraine 烏克蘭

烏克蘭發布《關於限制在電氣和電子設備中使用某些有害物質的技術法規》的修訂議草案

[法規草案] 烏克蘭公布內閣部長會議決議草案，擬修訂《關於限制在電氣和電子設備中使用某些有害物質的技術法規》。
該決議草案擬對烏克蘭內閣部長會議2017年3月10日第139號決議核准的《關於限制在電氣和電子設備中使用某些有害物質的技術法規》附件3和附件4進行修訂。修訂內容修訂內容包括延長部分有害物質限制豁免條款的有效期，並新增部分與歐盟類似的豁免條款。該決議草案旨在使《技術法規》與歐洲議會和理事會2011年6月8日關於限制在電氣和電子設備中使用某些有害物質的第2011/65/EU號指令保持一致。

Ukraine published Draft Resolution of Cabinet of Ministers of Ukraine “On Amendments to the Technical Regulation on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.
The draft Resolution provides for amendments to Annexes 3 and 4 to the Technical Regulation on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, approved by Resolution of the Cabinet of Ministers of Ukraine No. 139 of 10 March 2017. The amendments extend the validity periods of certain exemptions from restrictions on the use of hazardous substances in electrical and electronic equipment and add new exemptions similar to those applied in the European Union.The draft Resolution aims to align the provisions of the Technical Regulation with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

參考連結： https://eping.wto.org/en/Search?viewData=%20G/TBT/N/UKR/377

其他 / 多主題產品 Others / Products with Multiple Subjects

Chile 智利

智利發布多個產品的認證草案

[法規草案] 智利於2026年3月5日在官方公報上公佈第37.705號決議，該決議包含以下產品的認證草案:

–  家用電動洗碗機安全 (PE No. 1/04:2025)

–  電鎚安全 (PE No. 6/06:2025)

–  液化石油氣 (LPG) 加熱器安全 (PC No. 94/1:2025)

–  家用固定電氣裝置用金屬表面安裝或嵌入式接線盒/配電盒安全 (PE No. 3/23:2025)

–  針對電子音訊/視訊產品的電氣產品安全分析和/或測試規序 (PE No. 8/1:2025)

–  針對電熨斗 (乾式或蒸氣式）的安全認證分析和/或測試規序 (PE No. 1/02:2025)

–  螺絲起子與衝擊扳手安全 (PE No. 6/02:2025)

–  用於過濾式水循環泵之電氣產品安全分析及/或測試規程 (PE No. 1/43:2025)

–  除圓盤式電動砂光機及拋光機外，其他電動砂光機及拋光機的安全 (PE No. 6/04:2025)

The Republic of Chile hereby notifies the publication of draft analysis and/or test protocol for below products in the Official Journal on 5 March 2026, through Exempt Resolution No. 37.705 of 2026 of the Ministry of Energy and the Electricity and Fuel Board.

–  PE No. 1/04:2025 for household electric dishwashers

–  PE No. 6/06:2025 for Electric hammers

–  PC No. 94/1:2025 for liquefied petroleum gas (LPG) heaters

–  PE No. 3/23:2025 for metal, surface or flush-mounted, junction or distribution boxes for household fixed electrical installations

–  PE No. 8/1:2025 for the electronic audio and video products

–  PE No. 1/02:2025 for electric dry or steam irons

–  PE No. 6/02:2025 for screwdrivers and impact wrenches

–  PE No. 1/43:2025 for pumps for water recirculation through a filter

–  PE No. 6/04:2025 for electrical sanders and polishers other than disc type

China 中國

國家認監委關於11項強制性產品認證實施規則

根據《市場監管總局關於調整強制性產品認證目錄內部分產品認證模式的公告》(2025年第57號)，發布11項強制性產品認證實施規則，並自2026年7月1日起實施。
包含小功率電動機、電動工具、汽車行駛紀錄儀等。

According to the “Announcement of the State Administration for Market Regulation on Adjusting the Certification Mode of Some Products in the Compulsory Product Certification Catalogue” (Announcement No. 57 of 2025), 11 compulsory CCC Approval Implemenation Rules have been released, effective July 1, 2026.
These include small power motors, power tools, vehicle travel data recorders, etc.

參考連結： https://www.cnca.gov.cn/zwxx/gg/2026/art/2026/art_28b7746f4ad74ad3b7ca104b124e4ac9.html

Singapore 新加坡

電爐灶不得在新加坡銷售

新加坡發布通告說明《消費者保護 (安全要求) 條例》(CPSR)下電爐灶的測試、認證和註冊要求。
經與技術專家及合格評定機構諮詢，新加坡消費者保護辦公室 (CPSO) 認定，現行家用電爐灶相關國際標準尚未充分涵蓋電爐灶特有的安全風險。因此，與其他同類電器不同，電爐灶不符合安全標誌註冊條件，不得在新加坡銷售。

This circular provides clarification on the testing, certification, and registration requirements for electric fire stoves under the Consumer Protection (Safety Requirements) Regulations (CPSR).
Following consultation with technical experts and conformity assessment bodies, the CPSO has determined that existing relevant international standards for household electrical cooking appliances do not adequately address the unique safety risks posed by electric fire stoves. Unlike other appliances in this CG category, electric fire stoves are therefore not eligible for Safety Mark registration and cannot be supplied in Singapore.
CPSO will continue to monitor international standards development and will review its regulatory position should suitable safety standards that adequately address the relevant risks become available.

參考連結： https://www.consumerproductsafety.gov.sg/files/circulars/2026_04_15_circular.pdf

South Korea韓國

韓國擬對電動個人行動裝置法規進行修訂

韓國國家技術標準院發布第 2026-112 號公告，宣布擬修訂《電器及消費品安全管理法》第 28 條所列安全驗證對象消費品安全標準附件 72（電動個人行動裝置）。

本次擬議修訂內容包括新增電池過充與過放測試。

Korean Agency for Technology and Standards Announcement No. 2026-112, This notice announces a proposed amendment to Annex 72 (Electric Personal Mobility Devices) of the safety standards for Safety‑Verification Target Consumer Products under Article 28 of the Electrical Appliances and Consumer Products Safety Control Act. The proposed amendment includes the addition of battery overcharge and over‑discharge tests.

參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=2&cid=26226

韓國發布對《電器用品及生活用品安全管理運作要領》的部分修正草案預告 – 平板電腦及Cell

韓國國家技術標準院(KATS)發布第2026-143號公告 -《電器用品及生活用品安全管理運作要領》部分修正草案行政預告。

1.  修正理由: 為使電器用品安全管理制度得以順利運作，修正《電器用品及生活用品安全管理運作要領》

2.  主要內容:

–  修正【附表2】有關平板電腦之標準 (螢幕對角線長度): 平板電腦 (限於螢幕對角線

度20公分以上者；即使具備語音通話功能，亦視為平板電腦。)

–  修正【附表19】電池自主檢驗之試驗項目: 壓碎試驗 (僅適用於Cell)

3.  本修正草案意見徵詢至2026年7月10日止。

Korean Agency for Technology and Standards (KATS) Announcement No. 2026-143 – Administrative Notice of Draft Amendments to the “Guidelines for the Operation of Safety Management of Electrical Appliances and Household Products”.

1.  Reason for Amendment: To ensure the smooth operation of the electrical appliance safety management system, the “Guidelines for the Operation of Safety Management of Electrical Appliances and Household Products” are amended.

2.  Main Contents:

–  Amendment to Appendix 2 regarding the standard for tablet computers (screen diagonal length): Tablet computers (limited to those with a screen diagonal length of 20 cm or more; even those with voice call functionality are considered tablet computers.)

–  Amendment to Appendix 19 regarding the test items for self-inspection of cell: Crush test (applicable only to Cell )

3.  Comments on this draft amendment will be collected until July 10, 2026.

參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=2&cid=26278

韓國發布對《電器用品及生活用品安全管理運作要領》的部分修正草案預告-電動車充電器

韓國國家技術標準院(KATS)發布第2026-163號公告 -《電器用品及生活用品安全管理運作要領》部分修正草案進行行政預告。

1.  修正理由: 擴大電動車充電器安全管理適用範圍。

2.  主要內容: 擴大列為「安全確認對象」之電動車充電器的安全管理範圍
（額定輸出容量由 200 kVA以下，提高至 500 kVA以下）。

3.  本修正草案意見徵詢至2026年7月6日止。

Korean Agency for Technology and Standards (KATS) Announcement No. 2026-163 – Administrative Notice of Draft Amendments to the “Guidelines for the Operation of Safety Management of Electrical Appliances and Household Products”.

1.  Reason for Amendment: To expand the scope of safety management coverage for electric vehicle (EV) chargers.

2.  Main Contents: To expand the scope of safety management for EV chargers subject to the Safety Confirmation requirement, by increasing the applicable rated output capacity from 200 kVA or less to 500 kVA or less.

3.  Comments on this draft amendment will be collected until July 06, 2026.

參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=1&cid=26321

Taiwan 台灣

BSMI 預告修正「應施檢驗電源供應設備類商品」及「資訊產品類商品」相關檢驗規定

經濟部標準檢驗局 (BSMI) 預告修正「應施檢驗電源供應設備類商品」及「資訊產品類商品」相關檢驗規定，涵蓋電動車充電設備、電池充電器、UPS、不斷電系統及各類電源轉接器等產品。修正重點包括新增型式認可逐批檢驗機制、更新CNS檢驗標準、導入新版安全與資訊安全規範，以及調整RoHS限用物質標示要求。部分既有IEC或舊版測試報告可透過差異測試轉換使用，以利制度銜接。

The Bureau of Standards, Metrology and Inspection (BSMI), under the Ministry of Economic Affairs (MOEA), has proposed amendments to inspection requirements for power supply equipment and information technology products, covering EV charging equipment, battery chargers, UPS systems, and various power adapters. Key revisions include the introduction of type-approved batch inspection schemes, updated CNS safety standards, enhanced cybersecurity requirements, and revised RoHS labeling obligations. Existing IEC or previous-version test reports may be converted through supplementary difference testing to facilitate regulatory transition.

參考連結： https://www.bsmi.gov.tw/wSite/public/Data/f1777348093432.pdf

資訊 / 電信 ITE / Telecom

巴西

巴西發布 TV 3.0 第二代數位地面電視發射機與轉播機認證及許可技術要求草案

【法規草案】巴西發布一項法規提案，擬制定 TV 3.0 第二代數位地面電視發射機與轉播機的認證及許可技術要求。

該法規旨在確保相關設備符合國際 ATSC 3.0 標準，同時滿足巴西國內在電磁相容性、電氣安全及射頻使用等方面的規範要求。

法規生效後，將取代既有指引，以簡化先進數位廣播服務在巴西全國範圍內的導入與推廣。

Brazil published a proposal for the establishment of technical requirements for the certification and licensing of TV 3.0 (second-generation digital terrestrial television) transmitters and retransmitters in Brazil.
The regulation ensures these devices comply with international ATSC 3.0 standards while meeting national criteria for electromagnetic compatibility, electrical safety, and radiofrequency use.
Once enacted, it will replace previous guidelines to streamline the implementation of advanced digital broadcasting services nationwide.

 

Cape Verde 佛得角

佛得角 ARME 發布《2026 年國家頻率分配框架計畫》

2026 年 3 月 16 日，佛得角多部門經濟監管局（ARME）發布《2026 年國家頻率分配計畫》（QNAF）。該框架是佛得角管理無線電頻譜的主要監管工具，並符合國際電信聯盟（ITU）第 1 區標準。計畫內容針對 5G 行動服務、物聯網及公共安全網路導入關鍵頻譜分配，同時保留海上與航空導航等基本通訊所需的專用頻段。

On March 16, 2026, the Multisectoral Supervisory Authority for the Economy of Cape Verde (ARME) published the National Frequency Allocation Framework 2026 (QNAF). The framework is the primary regulatory tool for managing the country’s radio spectrum and is in line with the International Telecommunication Union (ITU) Zone 1 standards. The plan introduces critical spectrum allocation for 5G mobile services, IoT, and public safety networks, while retaining dedicated frequency bands for basic maritime and air navigation.

 

Chile 智利

智利 SUBTEL 擴大手機直連衛星服務

2026 年 3 月 25 日，智利電信局（SUBTEL）發布公告，宣布擴大手機直連衛星（D2C）服務。電信業者 Entel 將基於 Starlink 星座，於智利提供相關服務。SUBTEL 表示，智利是拉丁美洲第一個、全球第五個允許透過衛星數據進行簡訊與應用程式傳輸的國家；其餘四個國家分別為美國、紐西蘭、日本及加拿大。

On March 25, 2026, the Chilean Telecommunications Authority (SUBTEL) issued an announcement announcing the expansion of mobile phone direct-to-cellular (D2C) services. The operator Entel provides services to Chile based on the Starlink constellation. SUBTEL said Chile was the first country in Latin America and the fifth in the world to allow the use of satellite data for text messaging and app transmission. The other four countries are the United States, New Zealand, Japan and Canada.

 

Chile 智利

智利就 600 MHz 頻段用於國際行動通訊 IMT 展開公眾諮詢

【法規草案】智利針對授權使用 600 MHz 頻段提供國際行動通訊（IMT）服務，發布公眾諮詢。

600 MHz 頻段因具備低頻特性，在行動通訊領域具有高度價值。其訊號穿透力佳，可有效穿透建築物，並能在農村及偏遠地區提供更廣泛的網路覆蓋。目前智利正評估將 614 MHz 至 698 MHz 頻段，由電視廣播用途逐步轉換為國際行動通訊（IMT）服務的可行性。相關報告提出多項機制，旨在部分或全面清理該頻段，以提升連網基礎設施效率，並發揮其相較高頻段更具覆蓋優勢的特性。

Chile published public consultation for athurization of the 600 MHz band for IMT communications.
The 600 MHz band is a highly valuable resource for mobile telecommunications because its low frequency provides superior signal penetration through buildings and extensive coverage in rural areas. This specific portion of the radio spectrum, ranging from 614 to 698 MHz, is being evaluated for a potential transition from television broadcasting to International Mobile Telecommunications (IMT) services. The report proposes various mechanisms to partially or totally clear this band to improve connectivity infrastructure efficiency compared to higher-frequency bands.

 

Eswatini 史瓦帝尼

史瓦帝尼 ESCCOM 強調進口電子通訊設備須取得型式核准

2026 年 4 月 2 日，史瓦帝尼通訊委員會（ESCCOM）發布第 4/2026 號通告，內容涉及「電子通訊設備進口、型式核准與分銷管制」。ESCCOM 宣布，自 2026 年 4 月 13 日起，進口及使用電子通訊設備均須持有有效的型式核准證書。透過將型式核准機制與海關清關系統連結，ESCCOM 進一步完善進口環節的合規管理，補強過去可能存在的監管缺口。

On April 2, 2024, the Eswatini Communications Commission (ESCCOM) issued Circular No.4/2026 entitled “Control of the Importation, Type Approval and Distribution of Electronic Communications Equipments”. ESCCOM announced that from April 13, 2026, the import and use of electronic communication equipment must hold a valid type approval certificate. By linking type approval to the customs clearance system, ESCCOM resolves compliance gaps that may have existed in the import process.

 

India 印度

Following the memorandum issued by India’s National Communications Security Centre (NCCS) on July 7, 2025, exempting the certification of IP routers and Wi-Fi CPEs until March 31, 2026, the NCCS issued another notice on March 30, 2026, extending the security testing exemption period for related products to August 31, 2026.

 

Indonesia 印尼

印尼 DJID 發布行動通訊設備與平板電腦 SAR 限值第 197 號法令

2026 年 4 月 22 日，印尼 DJID 發布 2026 年第 197 號法令，針對行動通訊設備與平板電腦的特定吸收率（SAR）限值訂定相關要求。該法令已正式生效，並同步廢止 2024 年第 177 號法令，宣告其不再適用。

Indonesia Komdigi published Decree No. 197 of 2026 on April 22, 2026, on SAR Limits on Mobile Telecommunications Devices and Tablet Computers. This Decree in now in effect and revokes and declares invalid Decree No. 177 of 2024.

Japan 日本

日本擬部分修訂特定無線電設備技術標準符合性認證條例

【法規草案】日本預計修訂特定無線電設備技術標準符合性認證相關條例，將 TPMS、RKE（超高頻）、車用雷達、車載偵測感測器、UWB，以及無線區域網路設備〔2.4GHz／5.2GHz／5.6GHz／6GHz（≦25mW）〕等特定無線電設備，新增為適用自我確認制度管制的對象。本草案最終意見徵詢截止日為 2026 年 5 月 19 日。

Japan will add the following types of specified radio equipment such as TPMS, RKE (UHF band), Automotive Radar, In-vehicle Detection Sensor, UWB and Wireless LAN (2.4GHz / 5.2GHz / 5.6GHz / 6GHz (≦25mW)) to the Ordinance as a target for special specified radio equipment which is subject to the self-confirmation system. The final date of comment is 19 May 2026.

 

Kenya 肯亞

肯亞 CA 發布新版行動設備標準

2026 年 3 月 24 日，肯亞通訊管理局（CA）發布新版行動蜂巢設備技術規範。根據新規範，所有蜂巢設備均須採用 USB Type-C 作為充電介面，且充電線須可與電源供應器分離。CA 於 2026 年 3 月 26 日發布新聞稿進一步澄清，於 2026 年 3 月 24 日前已獲核准的手機和平板電腦，仍可繼續使用、持有及銷售。此外，CA 官網的型式核准頁面也已明確要求，申請認證時須提交樣品。

On March 24, 2026, the Communications Authority (CA) of Kenya published technical specification for mobile cellular equipment. Under the new specification, all cellular devices must use USB Type-C as the charging port, and the charging cable must be detachable from the power adapter. CA issued a press release on March 26, 2026, clarifying that phones and tablets approved through March 24, 2026 can continue to be used, owned, and sold.
In addition, the type approval page on the CA website clearly requires samples to be submitted for certification.

 

New Zealand 紐西蘭

On 06 March 2026, New Zealand notified WTO a document about Electricity (Safety) Amendment Regulations 2025 and Gas (Safety and Measurement) Amendment Regulations 2025.
Description of content:
• Amendments to the Electricity (Safety) Regulations 2010 (the ESR) and the Gas (Safety and Measurement) Regulations 2010 (the GSMR) will updateapproximately 440 citations of standards, alongside a range of technical updates.
• The Electricity (Safety) Regulations 2010 and the Gas (Safety and Measurement) Regulations 2010 (the regulations) set benchmarks for safe electricity and gasnetworks, installations, appliances, and associated fittings in New Zealand.
•  Updates to 309 citations in Schedule 4 of the Electricity (Safety) Regulations 2010, primarily to the latest available version of the same standard.
•  Introduction of 53 new citations in Schedule 4 of the Electricity (Safety) Regulations 2010, addressing a range of technologies, including (but not limited to) refrigerating systems, electrical vehicles, and transportable tools.
•  Updates to 22 citations in Schedule 1 of the Gas (Safety and Measurement) Regulations 2010, primarily to the latest available version of the same standard.
These changes ensure the regulations are as up to date as possible and meet international standards. This will remove existing barriers and costs for both consumers and suppliers and move closer in line to international counterparts.

Singapore 新加坡

新加坡發布新版《電信設備註冊指南及供應商符合性聲明（SDoC）》

新加坡發布新版《電信設備註冊指南及供應商符合性聲明（SDoC）》。

本次更新重點包括：

• 第 5.2.3 條關於「預設停用 2G 網路」的要求，將自 2026 年 12 月 31 日起，對所有手機強制適用。
• 第 5.4 條關於「緊急細胞廣播」的要求，將自 2026 年 4 月 1 日起，對所有手機強制適用。

上述兩項規定均不適用於在各自生效日期前，已達產品生命週期結束（EOL）的設備。

Singapore issued updated version of Guide for Registration of Telecommunication Equipment and Supplier’s Declaration of Conformity (SDoC). Among all,
-Section 5.2.3 (on 2G disabling by default) shall be enforced on all handsets effective 31 December 2026.
-Section 5.4 (on Emergency cell broadcast) shall be enforced on all handsets effective 1 April 2026.
Both regulations exclude those devices that have reached End of Life (EOL) prior to their respective enforcement dates.

 

UK 英國

家用電器 House Appliances

Saudi Arabia 沙烏地阿拉伯

沙烏地阿拉伯發布 SASO 2885 標準新版修訂草案通知

【法規草案】沙烏地阿拉伯發布 SASO 2885 標準新版修訂草案通知。該草案為 SASO 2885:2018《電動洗衣機－能源效率、用水性能要求及標籤》的更新版本。

本次草案納入先前發布之 Rv1 版本標準所收到的意見，並據此進行修訂。

該標準規範容量不超過 25 公斤、市電供電式洗衣機與洗脫烘一體機的最低能源效率要求（MEPS），以及相關測試、計算與標籤程序。適用範圍包括嵌入式洗衣機、多槽洗衣機及洗脫烘一體機等產品。

此外，該標準亦涵蓋以市電供電、但同時可由電池供電的電器產品。

Saudia Arabia published notification concerning new draft revision of Saudi Standard SASO 2885. This is a draft of Updated version of standard number SASO 2885:2018 “”Electrical Clothes Washing Machines – Energy and Water Performance Requirements and Labelling.
This draft incorporates revisions made in response to comments received on the previously notified Rv1. version of the standard.The standard specifies the Minimum Energy Performance Requirements (MEPS) as well as the testing, calculation, and labelling procedures for electric mains-operated washing machines and washer-dryers with capacities up to 25 kg, including built-in units, multi-drum washing machines, and washer-dryers. The scope also includes appliances that are mains-operated but can additionally be powered by batteries.

 

UK 英國

On March 19, 2026, the UK Department for Energy Security and Net Zero signed the new Statutory Instruments 2026 No. 318, “”The Ecodesign for Energy-Related Products and Energy Information (Household Tumble Dryers) Regulations 2026″”.
Key dates are as follows:
1. April 10, 2026 (Ecodesign requirements officially launched + transition period begins)
2. September 19, 2026 (Energy labeling obligations begin, transitional labels used)
3. January 19, 2027 (Full implementation of new mandatory labels + end of all transition periods)
4. May 8, 2027 (Final tightening of shutdown mode)
5. Before December 9, 2032 (Regulatory review)
Practical recommendations:
• Now (after April 2026): Immediately initiate Schedule 2 testing, spare parts supply chain setup, website information upload, and internal compliance assessment.
• By September 2026: Prepare transitional label templates, product information sheets, and advertising templates.
• By January 2027: Complete the correctability index (R-value) calculation and design new labels, and update technical documentation.
• All measurements/calculations must be performed according to Schedule 4 and the specified standards.
• Violations may result in market surveillance enforcement (Regulations 18-19).

 

能源效率要求 Energy Efficiency Requirements

Singapore 新加坡

新加坡發布節能修正法案

【法規草案】新加坡於 3 月 6 日發布《Energy Conservation (Amendment) Bill》節能修正法案。本次修正案的核心在於補足既有監管漏洞，將能源節約管制範圍從傳統供應鏈角色，如製造商與供應商，進一步延伸至終端消費者直接進口產品的行為。該法案擬建立一套完整的監管框架，涵蓋產品註冊、標準符合性、紀錄保存及執法要求，並包括廣告宣傳及產品後續使用等面向。同時，法案也提升主管機關的監管彈性，例如可於事後附加註冊條件，並允許透過電子郵件送達文件。

預計通過時間：2026 年 4 月至 6 月
預計生效時間：2026 年 7 月

Singapore released the Energy Conservation (Amendment) Bill on March 6th, 2026. The core of this amendment is to close regulatory loopholes, extending energy conservation regulations from the traditional supply chain (manufacturers, suppliers) to direct imports by end consumers. It establishes a comprehensive regulatory framework covering registration, standards compliance, record keeping, and enforcement (including advertising and subsequent use). The bill also enhances the flexibility of regulatory bodies, such as allowing for post-registration conditions and document delivery via email.
Proposed passage date: April to June 2026
Proposed effective date: July 2026

 

電池 / Batteries

China 中國

中國發布電子電氣設備用鋰離子電池安全國家標準草案

【法規草案】中國向世界貿易組織（WTO）通報一份關於電子電氣設備用鋰離子電池安全國家標準的草案文件。該文件規定電子電氣設備用鋰離子電池的一般安全要求與測試方法，適用於電子電氣設備所使用的鋰離子電池產品。

本草案意見徵詢截止日期為 2026 年 5 月 15 日。

China notified WTO a document about national standard of safety of lithium ion cells and batteries used in electronic and electrical equipment.
This document specifies the general safety requirements and test methods for lithium ion cells and batteries used in electronic and electrical equipment.This document applies to lithium ion cells and batteries used in electronic and electrical equipment.
The final date for comments is 15 May 2026.

 

China 中國

China notified WTO a document about national standard of safety of lithium ion cells and batteries used in electronic and electrical equipment.
This document specifies the safety requirements for lithium ion cells and batteries used in household electric appliances.This document applies to lithium ion cells and batteries used in household electric appliances.
The final date for comments is 15 May 2026.

 

China 中國

 

China 中國

GB 47372-2026《行動電源安全技術規範》正式發布

2026 年 3 月 31 日，中國正式發布強制性國家標準 GB 47372-2026《行動電源安全技術規範》，並將於 2027 年 4 月 1 日起正式實施。

該標準明確提升行動電源在高溫、過充、擠壓等異常使用情境下的安全防護能力，並新增循環老化後析鋰檢測，以降低行動電源長期使用後可能產生的內部短路風險。

本標準由工業和資訊化部組織制定，並在既有兩項通用強制性國家標準的基礎上，進一步明確多項關鍵要求，強化行動電源產品安全水準。此舉將有助於規範行動電源市場、推動產業升級，並保障消費者權益。

主要新增要求包括：

• 新增電池針刺試驗，從源頭降低產品安全風險。
• 提出智慧管理要求，須即時監測電池電壓、溫度等關鍵參數。
• 產品應具備異常資訊儲存與讀取功能，保障消費者知情權。
• 推動產品唯一性編碼管理，要求行動電源標示專屬「身分證號碼」，消費者可透過編碼查詢電池品牌等核心資訊。
• 強化生產製造全流程管控，明確規範行動電源原材料及生產過程的管理要求。

本技術規範設有 12 個月過渡期。過渡期間，企業申請 CCC 認證時，可選擇依據新標準或原有標準進行認證，為產業平穩銜接提供緩衝空間。過渡期結束後，企業須依照本技術規範進行產品生產、製造及銷售。

消費者已購買且取得 CCC 認證的合規行動電源產品，仍可繼續正常持有與使用。

On March 31, 2026, the mandatory national standard GB 47372-2026

Mobile Power Safety Technical Specifications”” was publicly released and will be implemented on April 1, 2027. The standard clearly improves the safety protection capabilities of mobile power in abuse scenarios such as high temperature, overcharging, and extrusion, and adds lithium precipitation detection after cyclic aging to reduce the risk of internal short circuit after long-term use of mobile power.
The standard is organized and formulated by the Ministry of Industry and Information Technology, and on the basis of the previous two general mandatory national standards, it clarifies a number of key requirements and further strengthens the safety level of mobile power, which will play an important role in regulating the mobile power market, promoting industrial upgrading and protecting consumer rights and interests.
The technical specification adds battery needle puncture test to reduce safety risks from the source; Intelligent management requirements are put forward, key parameters such as battery voltage and temperature need to be monitored in real time, and the product should also have abnormal information storage and reading functions to effectively protect consumers’ right to know; Implement product unique code management, requiring mobile power banks to be marked with exclusive “”ID card numbers””, through which consumers can query core information such as battery brands; Strengthen the control of the whole process of production and manufacturing, and clearly put forward the raw materials and production process control requirements of mobile power supplies.
The technical specification sets a 12-month transition period, during which enterprises can choose to implement new standards or original standards when carrying out CCC certification, providing sufficient space for the smooth transition of the industry; After the transition period, enterprises must engage in the production and sale of products in accordance with technical specifications.
Consumers have purchased CCC-certified compliant power bank products and can continue to hold and use them normally.

 

燈具 / LED Luminaiaries/LED

India 印度

印度 BIS 發布《LED 燈具修訂標準實施指南》

2026 年 3 月 20 日，印度標準局（BIS）發布《LED 燈具修訂標準實施指南》。

依據該指南，所有 LED 燈具均須由舊版標準升級至 2026 版，以符合修訂後的 IS 10322 系列標準要求。

關鍵時程如下：

• 並行適用期限：2026 年 8 月 2 日
• 自該日期後，若未能確保產品符合修訂後標準，相關證書將失效。

On 20 March 2026, BIS released the Guidelines for Implementation of Revised Standards for LED Luminaires.
All LED luminaires must move from older versions to the 2026 editions to comply with the revised IS 10322 standards.
Key Timelines:
•Last date of Concurrent Running: 02 August 2026.
•Beyond this date, no licence shall remain operative unless compliance with the Revised Standard is ensured.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

India 印度

印度 DPIIT 發布新版《2026 年家用、商用及類似電器安全〈品質管制〉令》

2026 年 4 月 6 日，印度工業與內部貿易促進部（DPIIT）發布《2026 年家用、商用及類似電器安全〈品質管制〉令》，取代 2025 年發布的相關法令。

該法令將家用、商用及類似電器安全標準 IS 302（第 1 部分）的實施期限，由 2026 年 3 月 19 日延長至 2026 年 10 月 1 日，適用於一般製造商及大型製造商。

主要豁免項目包括：

• 以研發為目的進口之設備，最多 200 台。
• 於印度國內生產、但用於出口的產品。

On 6 April 2026, the DPIIT has released the《Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026》which replaced the order released in 2025.
It extended the implementation timeline for the Safety of Household, Commercial, and Similar Electrical Appliances under IS 302 (Part 1) from 19 March, 2026 to 1 October, 2026 for General and Large Scale Manufacturers
Key Exemptions:
•Up to 200 units imported for R&D purposes
•Products manufactured domestically for export

 

India 印度

On 2026/3/11, DPIIT has issued the《 Aluminium and Aluminium Alloy Products (Quality Control) Order, 2026》, in supersession of 2025 version.
Under this order, 17 categories of aluminium products, including irrigation tubes, EC-grade aluminium rods, pharmaceutical packaging foil, aluminium composite panels, etc., must comply with relevant Indian Standards (IS) and bear the ISI Mark issued by the Bureau of Indian Standards (BIS).
Exemptions
• Products manufactured exclusively for export.
• Up to 200 kg per year can be imported for R&D purposes, with proper records and strictly non-commercial use.

沙烏地阿拉伯標準、計量和品質組織（SASO）發佈通知，自2026年5月1日起，所有符合USB Type-C標準的設備均需提供測試報告作為合規證明。

This is a reminder that the implementation of requiring test reports as proof of compliance with USB Type-C requirements will be effective from 1st May.

產品範圍如下

For below mentioned products

測試報告要求如下

For below mentioned test report

SASO IEC 62680-1-2:2023

SASO IEC 62680-1-3:2023