2026年9月國際市場准入資訊更新
資訊 / 電信 ITE / Telecom
Australia 澳洲
澳洲發布關於更新電信客戶設備監管規定的提案
[法規草案]澳洲通訊與媒體管理局 (ACMA) 於 2026 年 7 月 20 日啟動電信客戶設備監管規定更新提案：
《2025 年電信（客戶設備與客戶佈線標籤公告）文書修訂草案標註彙編版》
《2026 年電信（行動設備空中介面）技術標準》
《2026 年電信（客戶設備安全）技術標準》
主要聚焦以下 3 個關鍵領域：
1. 延長《電信產品通知》(TLN) 下標準符合性的紀錄保存期限。
2. 限制針對手機標準符合性的「既得權利」安排，並在 6 個月或 12 個月的過渡期內，強制要求符合有關緊急呼叫存取的最新產業標準。
3. 採用修訂後的客戶設備安全產業標準 (AS/NZS 62368.1:2026)，並引入相關條款以消除重複的符合性義務。
歡迎於 2026 年 9 月 17 日前提出任何回饋意見。
ACMA proposal for Updates to Telecommunications Customer Equipment Regulations by the Australian Communications and Media Authority (ACMA), to be launched on July 20, 2026
Telecommunications (Labelling Notice for Customer Equipment and Customer Cabling) Instrument 2025 (TLN) – Marked-up compliation
Telecommunications (Mobile Equipment Air Interface) Technical Standard 2026
Telecommunications (Customer Equipment Safety) Technical Standard 2026
Focuses on 3 key areas:
1. Extending record-keeping timeframes for standards compliance under the TLN.
2. Limiting the grandfathering arrangements in relation to standards compliance for mobile phones and, subject to a 6-month or 12-month transition period, mandating compliance with the latest industry standard for emergency call access.
3. Adopting a revised industry standard (AS/NZS 62368.1:2026) for the safety of customer equipment and introducing a provision to remove duplicative compliance obligations.
Any feedback is welcome by 17 September 2026.
參考連結： https://www.acma.gov.au/consultations/2026-07/proposal-update-telco-customer-equipment-regulation
澳洲ATA更新AS/CA S042標準
澳洲電信聯盟 (ATA) 於 2025 年 6 月 30 日發布了以下標準：
• AS/CA S042.1:2025 電信網路空中介面連接要求 – 第 1 部分：通用要求
• AS/CA S042.4:2025 電信網路空中介面連接要求 – 第 4 部分：IMT-2000 和 IMT-Advanced 使用者設備
• AS/CA S042.5:2025 電信網路空中介面連接要求 – 第 5 部分：IMT-2020 使用者設備
這些標準取代了以下標準：AS/CA S042.1:2022、AS/CA S042.4:2022 和 AS/CA S042.5:2022。
The Australian Telecommunications Alliance (ATA) published the following standards on June 30, 2025:
– AS/CA S042.1:2025 Requirements for connection to an air interface of a Telecommunications Network – Part 1: General
– AS/CA S042.4:2025 Requirements for connection to an air interface of a Telecommunications Network—Part 4: IMT-2000 and IMT-Advanced Customer Equipment
– AS/CA S042.5:2025 Requirements for connection to an air interface of a Telecommunications Network—Part 5: IMT-2020 Customer Equipment
These standards supersede the following standards: AS/CA S042.1:2022, AS/CA S042.4:2022, and AS/CA S042.5:2022.
On June 26, 2026, ATA published an amendment to AS/CA S042.1:2025, which renames the National Messaging System (NMS) to AusAlert.
澳洲EESS對具有夾傷風險的設備新增評估要求
對於設計中包含用於自動開啟和關閉的驅動門等具有夾傷風險的某些設備（例如微波爐），澳洲 EESS 要求需提供證據，證明該驅動功能經評估後不會造成夾傷或其他傷害風險。
以微波爐為例，AS/NZS 60335.2.25 目前沒有針對驅動門的明確評估要求。在 AS/NZS 60335.2.25 修訂並納入相關要求之前，評估此風險的一種方法是：採用不低於 AS/NZS 60335.2.31 第 20.101 條的要求。
對於 EESS 認證，符合此測試標準的測試報告不需要是正式的認可報告，但必須來自認可範圍包括 AS/NZS 60335.2.31（或 IEC 60335.2.31）的測試機構（如果是 IECEE CB 報告，則不能是 CTF3 或 CTF4）。
It has been identified some equipment (microwave ovens for example) have design that include types with driven doors for opening and closing. These driven doors or other driven parts of a microwave oven may have an entrapment risk to be addressed that AS/NZS 60335.2.25 may not fully address. Similarity the standards for equipment that have not traditionally had driven doors may not have criteria to fully address the risk of entrapment of an automatic or semi-automatic moving part.
Where a relevant standard may not address all the risks related to the particular equipment or particular
design additional tests from other standards may need to be applied.
As an example, for Microwave ovens certification requirements, in addition to full compliance with AS/NZS 60335.2.25, microwave ovens with driven doors or other driven parts that open or close automatically, and that are accessible to the end user during normal operation, are required have evidence the driven function is assessed to not be a risk of entrapment or other injury.
AS/NZS 60335.2.25 does not currently have a clear assessment requirement for driven doors. Until AS/NZS 60335.2.25 is amended to include a requirement, a method to assess this risk could be to apply
requirements no less than the requirements of AS/NZS 60335.2.31 clause 20.101.
For other equipment a method to apply requirements no less than the requirements of AS/NZS 60335.2.31 clause 20.101 could apply where the specific equipment safety standard does not have its own tests to assess entrapment or other injury from a driven part.
For EESS certification the test report to this TEST CRITERIA requirement does not need to be a formal accredited report but must come from a test facility which has accreditation that includes AS/NZS 60335.2.31 (or IEC 60335.2.31) (and not be CTF3 or CTF4 if an IECEE CB report).
Brazil 巴西
巴西Anatel發布第789號決議，核准《巴西頻段分配、用途和分發計畫》(PDFF)，並修訂《廣播業務及其輔助業務調頻頻道和使用條件條例》(RCC-SRA)
巴西國家電信管理局 (Anatel) 通過第 789 號決議，核准更新後的國家頻率分配和指定框架 (PDFF)，並修訂適用於無線電頻段的頻道劃分和使用條件。
該決議與2026年軍用頻譜分配方案同時通過，明確了頻率使用的技術條件，並劃分了主要業務類別和次要業務類別。
The National Telecommunications Agency (Anatel) has adopted Resolution No. 789, approving the updated National Frequency Allocation and Designation Framework (PDFF) and amending the channelization and conditions of use applicable to radiofrequency bands.
The resolution, passed alongside 2026 military spectrum allocations, defines technical conditions for frequency use and establishes boundaries between primary and secondary service categories.
參考連結： https://informacoes.anatel.gov.br/legislacao/resolucoes/2026/2157-resolucao-anatel-789
巴西 ANATEL 擬建立行動裝置認證產品之實體及數位識別防偽制度
[法規草案] 巴西 ANATEL 公共諮詢第 26 號提出一套新的單件產品實體與數位識別系統，適用於經 ANATEL 認證的手機、鋰電池及手機充電器，旨在防止認證標誌遭偽造，並實現產品層級的認證與可追溯性。
Brazil ANATEL Public Consultation No. 26 proposes a new operational procedure for identifying ANATEL-certified mobile phones, lithium batteries, and mobile phone chargers through a secure authentication system combining physical security labels and unique digital identifiers.
The proposal requires each certified product unit to have a traceable “Physical-Digital Identity,” linked to ANATEL’s official validation database, enabling consumers, retailers, and regulators to verify authenticity and helping prevent counterfeiting, tampering, and unauthorized sales.
It also introduces requirements for online marketplaces to display a digital certification identifier for regulated products and allows ANATEL to monitor listings and take administrative action against non-compliant products or advertisements.
Chile 智利
智利 SUBTEL發布 Resolución Exenta N° 1.247，重新制定低功率／短距離無線設備 (SRD) 的技術規範
智利 SUBTEL 於 2026 年 7 月 10 日發佈 Resolución Exenta N° 1.247，重新制定低功率／短距離無線設備 (SRD) 的技術規範，取代 2017 年 Resolución N° 1.985；除更新各類設備的頻率、功率等技術條件外，也強化免認證設備的 Test Report、Declaration of Conformity 及 QR Code 資訊揭露要求。
Chile’s SUBTEL issued Exempt Resolution No. 1,247 on July 10, 2026, establishing new technical regulations for low-power/short-range radio devices (SRDs) and replacing Resolution No. 1,985 of 2017. In addition to updating the technical requirements, such as frequency bands and power limits, the new resolution strengthens the compliance requirements for exempt devices, including test reports, Declarations of Conformity, and QR-code-based disclosure of product information.
參考連結： https://www.bcn.cl/leychile/navegar?i=1109333&utm_source=chatgpt.com
India 印度
印度提出「網路交換器」基本要求 (ER) 草案
[法規草案] 印度提出「網路交換器」基本要求 (ER) 草案。
該草案開放公眾意見徵詢，截止日期為2026年9月7日。
India proposesraft Essential Requirements (ER) for "LAN Switch".
The draft recieves comments till 07 September 2026.
參考連結： https://members.wto.org/crnattachments/2026/TBT/IND/26_03439_00_e.pdf
印度 TEC 延長 MTCTE 下 ILAC 測試報告接受期限至 2026 年 12 月 31 日
印度電信工程中心 (TEC) 於 2026 年 6 月 30 日發布 Notification No. 5-2/2024-TC/TEC，延長在 MTCTE 制度下接受 ILAC 測試報告的期限。
根據通知，來自非與印度接壤國家、由 ILAC Signatory 認可且具 ILAC MRA Mark 使用資格之實驗室所出具的測試報告，可繼續用於下列 4 類 ER 的相關技術參數，至 2026 年 12 月 31 日：
1 ) 蜂窩網路基站 (Base Station for Cellular Network) – 有源天線系統 – OTA、5G NR Type 1-O 基站、5G NR Type 2-O 基站、5G NR Type 1-H 基站、GSM 基站 (BTS) 及混合有源天線系統 (Hybrid Active Antenna System)
2) SIM 卡 – 所有型號
3) VHF/UHF 無線電設備系統 – 所有型號
4) E 頻段固定無線電中繼系統 – 所有型號
On 30 June 2026, the Telecommunication Engineering Centre (TEC) issued Notification No. 5-2/2024-TC/TEC, extending the acceptance of ILAC test reports under the Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.
Under the notification, test reports issued by laboratories accredited by ILAC signatories and authorized to use the ILAC MRA Mark, located in non-border sharing countries, will continue to be accepted for relevant technical parameters of the following four ERs until 31 December 2026:
1) Base Station for Cellular Network – Active Antenna System-OTA, Base Station 5G NR Type 1-O, Type 2-O, Type 1-H, BTS for GSM, and Hybrid Active Antenna System
2) SIM – All variants
3) VHF UHF Radio Equipment System – All variants
4) E-band Fixed Radio Relay Systems – All variants
印度延長 MTCTE 17 項ER測試報告提交豁免至 2026 年 12 月 31 日
印度電信工程中心 (TEC) 宣布繼續豁免提交與MTCTE項下各類設備相關的17項ER的測試報告，豁免期限已延長至2026年12月31日或另行通知為止。
India continues to exempt from submission of test reports for 17 test parameters/interfaces pertaining to various ERs under MTCTE has been extended/granted up to 31.12.2026 or till further orders.
印度延長 PON 寬頻設備系列測試報告提交豁免至 2026 年 12 月 31 日
印度電信工程中心 (TEC) 宣布，「PON (Passive Optical Network，被動式光纖網路) 系列寬頻設備 (Broadband Equipment)」的測試報告提交豁免期限延長至 2026 年 12 月 31 日。在豁免期間，符合適用條件的 PON 系列寬頻設備可免於提交相關測試報告。
India’s Telecommunication Engineering Centre (TEC) has extended the exemption from submission of test reports for the PON (Passive Optical Network) family of Broadband Equipment until 31 December 2026. During the exemption period, eligible PON broadband equipment will remain exempt from the submission of applicable test reports.
印度 BIS 發布 ⟪Guidance on product categories under Compulsory Registration Scheme (CRS) ⟫，明確規範穿戴式眼鏡與 XR 裝置的 BIS CRS 認證分類
印度 BIS 於 2026 年 8 月 13 日發布《Guidance on product categories under Compulsory Registration Scheme (CRS)》，明確規範穿戴式眼鏡與 XR 裝置的 BIS CRS 認證分類，核心規則為依功能精準分類，且一個產品名稱對應一張證書。
核心重點：
• 嚴禁跨類別申報：眼鏡若含相機或螢幕，不得再歸類為一般無線耳機。
• 強制單獨認證：表格內每個指定產品名稱 (Product Name) 皆須單獨申請一張 BIS 證書。
• 嚴格區分型態 (Glasses vs. Headset vs. Other)：BIS 明確將「眼鏡型態 (Glasses)」、「頭戴式裝置 (Headset)」與「其他裝置 (Other)」獨立區分，型態不同即代表不同的 Product Name，必須分別申請證書。
• 「Other 類」為備用分類：若產品不屬於標準眼鏡或常見頭戴式裝置型態（例如特定單眼夾扣或特殊工業用 XR 設備），須歸入 Other AR Devices 或 Other MR Devices 申請。
• AR/MR 眼鏡的優先判定原則：只要眼鏡具有疊加顯示螢幕 (Overlay Display)，不論是否包含相機或音訊功能，一律優先歸類至 XR 類別 (AR/MR Glasses)，不可再申報為一般 Smart Glasses。
• 功能決定規費與測試：相機功能（拍照 vs. 錄影）直接影響歸屬類別 (Digital Camera vs. Video Camera)，送測前須確認規格。
請注意，自 2025 年 12 月 5 日起，Extended Reality Products（包含所有 AR、VR、MR 等）已納入 CRS 強制列管產品。自 2026 年 5 月 1 日起，所有依舊版標準 (IS 13252-1 / IS 616) 核發的證書皆失效，所有新舊申請案均須全面採用最新的 IS/IEC 62368-1:2023 標準。
On August 13, 2026, the Indian Standards of Industry and Information Technology (BIS) released the "Guidance on product categories under Compulsory Registration Scheme (CRS)" ⟫, clearly regulating the BIS CRS certification classification for wearable glasses and XR devices. The core rule is precise categorization based on function, with one certificate per product name.
Key points:
• Strictly prohibit cross-category reporting: Glasses containing cameras or screens cannot be classified as general wireless headphones.
• Mandatory separate certification: Each specified product name in the form must apply for a separate BIS certificate.
• Strict distinction between forms (Glasses vs. Headset vs. Other): BIS clearly separates "Glasses," "Headset," and "Other" into independent categories. Different forms represent different product names and must be certified separately. • "Other" is a safety net category: If the product is not a standard pair of glasses or a common helmet (e.g., a specific monocular clip-on or special industrial XR equipment), it must be classified as Other AR Devices or Other MR Devices.
• Priority for AR/MR glasses: As long as the glasses have an overlay display, regardless of whether they include camera or audio functions, they will be prioritized for classification as XR (AR/MR Glasses) and cannot be reported as general Smart Glasses.
• Functionality determines fees and testing: Camera functionality (photography vs. video recording) directly affects the category (Digital Camera vs. Video Camera). Specifications must be confirmed before submission for testing.
Please note that as of December 5, 2025, Extended Reality Products (including all AR, VR, MR, etc.) have been included in the CRS mandatory product list. From May 1, 2026, all certificates issued under the old standards (IS 13252-1 / IS 616) will be invalid, and all new and old applications will be required to fully adopt the latest IS/IEC 62368-1:2023 standard.
Paraguay 巴拉圭
巴拉圭發布《國家頻率計畫》
巴拉圭國家電信委員會 (CONATEL) 核准《國家頻率分配計畫》(PNAF) 的修訂，並正式將其更名為《國家頻率計畫》(Plan Nacional de Frecuencias – PNF)。
該決議指出，現行計畫已包含足夠的技術、監管及頻率分配要素，可作為完整的國家頻率計畫，同時納入無線電頻譜使用的指導原則，包括頻譜使用、管理與管制、整合、專業化、競爭與機會均等、技術中立性及透明度。
The Telecommunication National Commision (CONATEL) of Paraguy approved amendments to the National Frequency Allocation Plan (Plan Nacional de Atribución de Frecuencias – PNAF) and officially changed its name to the National Frequency Plan (Plan Nacional de Frecuencias – PNF).
The resolution states that the existing plan already contained sufficient technical, regulatory, and frequency-allocation elements to serve as a full national frequency plan, while incorporating guiding principles for access to the radio spectrum, including spectrum use, administration and control, integration, specialization, competition and equal opportunity, technological neutrality, and transparency.
It also provides that all references to the PNAF in legal instruments, regulations, technical standards, publications, reports, and general documentation are to be understood as references to the PNF, and it instructs CONATEL to implement and periodically update the plan in accordance with ITU Radio Regulations, international developments, technological evolution, and emerging services.
參考連結： https://www.conatel.gov.py/resolucion-directorio-n-1232-2026/
Philippines 菲律賓
菲律賓為SRD增加77-81 GHz頻段
菲律賓國家電信委員會 (NTC) 已於 2026 年 6 月 29 日正式頒佈 Memorandum Circular No. 004-06-2026，修訂了原本 MC No. 03-05-2007 的規範，正式開放 77–81 GHz 頻段用於運動檢測與警報設備 (Equipment for Detecting Movement and Alert)，並限制最大射頻輸出功率為 50 mW EIRP。
On June 29, 2026, the Philippine National Telecommunications Commission (NTC) officially issued Memorandum Circular No. 004-06-2026, revising the original specification MC No. 03-05-2007, officially opening the 77–81 GHz band for equipment for detecting movement and alarm devices, and limiting the maximum radio frequency output power to 50 mW EIRP.
參考連結： https://ntc.gov.ph/wp-content/uploads/2026/MEMORANDUM_CIRCULARS/NTC_MC_No_004-06-2026.pdf
Singapore 新加坡
新加坡 IMDA 更新住宅閘道網路安全要求，強化最低安全標準
新加坡資訊通信媒體發展局 (IMDA) 於 2026 年 6 月發布新版《Security Requirements for Residential Gateways》Issue 2，更新住宅閘道 (Residential Gateway) 的網路安全要求，取代 2020 年發布的 Issue 1。
新版要求配合 Cybersecurity Labelling Scheme (CLS) Level 2，進一步強化住宅閘道在密碼安全、登入驗證、憑證管理、韌體更新及資料保護等方面的安全控制，並要求符合相關測試及驗證項目。
In June 2026, Singapore’s Infocomm Media Development Authority (IMDA) published Issue 2 of the Security Requirements for Residential Gateways, replacing Issue 1 published in 2020.
The updated requirements align with Cybersecurity Labelling Scheme (CLS) Level 2 and strengthen security controls for residential gateways, covering password security, authentication, credential management, firmware updates, and data protection.
參考連結： https://www.imda.gov.sg/assets/6f0fb057-8faf-47ab-9936-116e570b882f.pdf
South Africa 南非
南非ICASA發布更新版《2026年國家無線電頻率規劃》
南非獨立通信管理局 (ICASA) 宣布，根據2005年《電子通信法》(2005年第36號法案) 第34條的規定，在獲得通信和數位技術部長核准後，發布更新版《2026年國家無線電頻率規劃》(NRFP)。
ICASA Publishes an updated National Radio Frequency Plan 2026
The Independent Communications Authority of South Africa announces the publication of an updated National Radio Frequency Plan (NRFP) 2026 in accordance with section 34 of the Electronic Communications Act, 2005 (Act No 36 of 2005), following its approval by the Minister of Communications and Digital Technologies.
參考連結： https://www.icasa.org.za/news/2026/icasa-publishes-an-updated-national-radio-frequency-plan-2026
South Korea 韓國
韓國 RRA 優先實施固定衛星業務地球站無線設備符合性評估測試方法修訂
韓國國立電波研究院 (RRA) 宣布，將優先實施《無線設備符合性評估測試方法》(KS X 3123) 的部分修訂，自 2026 年 7 月 7 日起生效。
此次修訂將原適用於低地球軌道衛星通訊用無線設備的符合性評估測試方法，修訂為適用於《電波法施行令》第21條第2款所規定的固定衛星業務地球站用無線設備。
在相關國家標準修訂正式完成前，上述修訂內容將優先適用。
The Radio Research Agency (RRA) has announced the priority implementation of a partial amendment to the Test Methods for Conformity Assessment of Radio Equipment (KS X 3123), effective July 7, 2026.
The key change revises the scope of the test method from Low Earth Orbit Satellite Communications radio equipment to fixed-satellite service earth station radio equipment in accordance with Article 21(2) of the Enforcement Decree of the Radio Waves Act.
This amendment will remain in effect on a priority basis until the formal revision of the national standard (KS X 3123) is completed.
參考連結： https://www.rra.go.kr/ko/notice/noticeList_view.do?nb_seq=6460&cpage=1&nb_type=0
韓國RRA發布關於KS C 3350取代KS C 3370-1及KS C 3370-2標準通知
韓國國立電波研究院 (RRA) 發布第 2026-6 號公告，《KS C 3370-1 靠近耳朵使用之可攜式無線設備的電磁波吸收率測量程序》及《KS C 3370-2 靠近人體使用之可攜式無線設備的電磁波吸收率測量程序》廢止，兩者皆整合並由《KS C 3350 靠近人體使用之無線通訊設備的電磁波吸收率評估測量程序》取代。本公告自發布之日 2026 年 8 月 26 日起施行。
The Radio Research Agency (RRA) issued Notice No. 2026-6, announcing the withdrawal of KS C 3370-1, “Measurement Procedure for the Specific Absorption Rate (SAR) of Portable Wireless Equipment Used in Close Proximity to the Ear,” and KS C 3370-2, “Measurement Procedure for the Specific Absorption Rate (SAR) of Portable Wireless Equipment Used in Close Proximity to the Human Body.”
Both standards have been consolidated and replaced by KS C 3350, “Measurement Procedure for Evaluating the Specific Absorption Rate (SAR) of Wireless Communication Devices Used in Close Proximity to the Human Body.”
This Notice takes effect from the date of issuance, August 26, 2026.
韓國發布關於擬修訂《KC 62133-2標準及電池新增適用標準》的行政通知
[法規草案] 韓國技術標準院 (KATS) 發布國家技術標準院公告 第2026-248號《電器用品及生活用品安全管理運用要領》及 1 項《電器用品安全標準》(KC 62133-2) 修正草案行政預告: 1) 對品項「電池」新增適用之安全標準KC 62368-1
2) 修正 KC 62133-2 (攜帶型設備用密閉式鋰二次電池安全標準) 包括：
* 明確適用範圍
* 修正部分用語與定義
* 修正部分標示事項等
該草案意見徵詢至2026年9月16日。
The Korean Agency for Technology and Standards (KATS) issued KATS Notice No. 2026-248, announcing the proposed revisions to the Operating Guidelines for Safety Management of Electrical Appliances and Consumer Products and one Electrical Appliance Safety Standard (KC 62133-2):
1) KC 62368-1 is newly added as an applicable safety standard for the product ) category “Battery.”
2) KC 62133-2 (Safety Standard for Portable Sealed Secondary Lithium Cells and Batteries) is proposed to be revised, including:
– Clarification of the scope
– Revision of certain terms and definitions
– Revision of certain marking/information requirements, etc.
This is currently a draft proposal, and public comments will be accepted until September 16, 2026.
參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=&cid=29339
韓國發布修訂 Tablet PC 與 Smartphone 定義及分類範圍公告
韓國技術標準院 (KATS) 發布國家技術標準院公告 《電器用品及生活用品安全管理運用要領》修正公告第2026-191號。
1. 主要修正內容：
A. 修正平板電腦(Tablet PC)的分類範圍，從螢幕對角線長度由≥ 17 公分調整為≥20公分，並定義Tablet PC和Smartphone的分類範圍；
B. 修正單電池(Cell)自主檢查之測試項目。
本公告自 2026年11月1日 起施行。
關於部分安全確認 (Safety Confirmation) 對象電器用品變更為供應商符合性確認 (SDoC) 對象電器用品之過渡措施：
1. 在本運用要領施行前，依原《附表 2》第 10 號「타」屬於安全確認對象電器用品 (안전확인대상전기용품)，且已依《電器用品及生活用品安全管理法》第 15 條第 1 項完成安全確認申報，或依第 17 條第 1 項接受安全檢查者；以及依第 16 條取得安全確認申報豁免者，均視為已依修正後規定，作為供應商符合性確認對象電器用品 (공급자적합성확인대상전기용품)，分別完成第 23 條規定的供應商符合性確認，或取得第 24 條規定的供應商符合性確認豁免。
2. 在本運用要領施行前，依原《附表 2》第 10 號「타」屬於安全確認對象電器用品，且已依第 15 條第 1 項申請安全確認申報，或依第 17 條第 1 項申請安全檢查，目前相關程序仍在進行中者，視為已依修正後規定，作為供應商符合性確認對象電器用品，完成或申請第 23 條所規定的供應商符合性確認等相關程序。
The Korea Agency for Technology and Standards (KATS) issued KATS Notice No. 2026-191, announcing amendments to the “Operational Guidelines for Safety Management of Electrical Appliances and Consumer Products.”
1. Key Amendments:
A. Revise the classification criteria for Tablet PCs by changing the minimum screen diagonal length from ≥ 17 cm to ≥ 20 cm, and clarify the classification criteria for Tablet PCs and smartphones.
B. Revision of the self-inspection test items for cells
The amended notice will take effect on November 1, 2026.
Transitional measures for certain electrical appliances that are being changed from Safety Confirmation to Supplier’s Declaration of Conformity (SDoC):
1. For electrical appliances that were subject to Safety Confirmation under Item “타” of No. 10 of the previous Annex 2 before the effective date of these amended Guidelines:
If a Safety Confirmation declaration was completed pursuant to Article 15(1) of the Electrical Appliances and Consumer Products Safety Control Act, or a safety inspection was conducted pursuant to Article 17(1); or
If an exemption from Safety Confirmation declaration was granted pursuant to Article 16,
such products shall be deemed to have completed Supplier’s Declaration of Conformity (SDoC) pursuant to Article 23, or to have received an exemption from SDoC pursuant to Article 24, respectively, under the amended provisions.
2. For electrical appliances that were subject to Safety Confirmation under Item “타” of No. 10 of the previous Annex 2 before the effective date of these amended Guidelines, and for which a Safety Confirmation declaration pursuant to Article 15(1) or a safety inspection pursuant to Article 17(1) has already been applied for and is still in progress, such products shall be deemed to have completed or applied for the relevant SDoC procedures under Article 23 in accordance with the amended provisions.
參考連結： https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=3&cid=29294
Türkiye 土耳其
土耳其發布關於無線電設備進口管制的公告
土耳其貿易部於2026年7月11日在官方公報上發布了一項修正案（產品安全與檢驗：2026/36），修訂了無線電設備的進口檢驗規則。
該修正案將先前合併的智慧手錶和無線藍牙耳機的海關稅則號列，拆分為兩個獨立的編碼：
– 8517.62.00.90.11 (智慧手錶)；以及
– 8518.30.00.90.11 (無線耳機)。
該公告自發布之日起生效，並由貿易部長負責執行。
The Turkish Ministry of Trade published an amendment (Product Safety and Inspection: 2026/36) in the Official Gazette on 11 July 2026, revising the import inspection rules for radio equipment.
The amendment separates the previously combined customs tariff entry for smartwatches and wireless Bluetooth earphones into two separate codes:
– 8517.62.00.90.11 for smartwatches; and
– 8518.30.00.90.11 for wireless earphones.
The communiqué entered into force on the date of its publication and is administered by the Minister of Trade.
參考連結： https://www.resmigazete.gov.tr/eskiler/2026/07/20260711-53.htm
土耳其發布某些產品必須帶有CE標誌的進口管制公告
土耳其貿易部於2026年7月11日在官方公報上發布一項修正案（產品安全與檢驗：2026/37），修訂了某些需要加貼CE標誌的產品的進口檢驗規則 （2026/9）。
該修正案在附件2第238行之後新增了條目8536.50.80.00.10 – 「具有運動偵測功能的產品－低電壓指令 (LVD)」，並更新了現有「家用開關」條目，將具有運動檢測功能的開關排除在外，這些開關現在包含在新增的獨立條目中。
該公告自發布之日起生效，並由貿易部長負責執行。
The Turkish Ministry of Trade published an amendment (Product Safety and Inspection: 2026/37) in the Official Gazette on 11 July 2026, revising the import inspection rules for certain products required to bear the CE marking (2026/9).
The amendment adds a new entry, 8536.50.80.00.10 – “Those with motion detection feature – LVD,” after row 238 in Annex 2, and updates the existing entry for “Household switches” to exclude switches with motion detection features, which are now covered under the new separate entry.
The communiqué entered into force on the date of its publication and is administered by the Minister of Trade.
參考連結： https://www.resmigazete.gov.tr/eskiler/2026/07/20260711-54.htm
United Arab Emirates 阿拉伯聯合大公國
阿拉伯聯合大公國發布電腦顯示器的能源效率和能源效率標籤要求草案
[法規草案] 阿拉伯聯合大公國發布了技術法規草案UAE.S 5010 -11 :2026: Part 11《電器能源效率標籤第11部分：電腦顯示器能耗效率》。
該技術法規草案規定了在阿拉伯聯合大公國市場銷售之電腦顯示器的能源效率和能源效率標籤要求。它適用於桌上型電腦顯示器、專業繪圖顯示器、遊戲顯示器以及一體式電腦的顯示元件，但不包括投影機、筆記型電腦、平板電腦、醫療顯示器、虛擬實境頭戴式顯示器、安全監控顯示器、工業控制台和互動式顯示器等產品。
該草案基於 IEC 62087-1:2015 和 IEC 62087-7:2018 標準，用於測量電腦顯示器的功耗。其目標為提高能源效率，為消費者提供清晰且可比較的能源效率訊息，降低電力消耗，並支持阿聯酋的節能和永續發展目標。
UAE published draft Technical Regulation UAE.S 5010 -11 :2026: Part 11 "Labeling – Energy Efficiency Label for Electrical Appliances Part 11: Energy Consumption Efficiency for Computer Monitor".
This draft UAE technical regulation specifies the energy efficiency and energy labeling requirements for computer monitors placed on the UAE market. It applies to desktop computer monitors, professional graphics monitors, gaming monitors, and the display component of all-in-one computers, while excluding products such as projectors, laptops, tablets, medical displays, virtual reality headsets, security displays, industrial control panels, and interactive displays.The draft establishes:
• Maximum energy consumption limits for On Mode, Off Mode, Standby Mode, and Networked Standby Mode;
• Requirements for Automatic Brightness Control (ABC), peak white luminance, and automatic standby functionality;
• A methodology for calculating the Energy Efficiency Index (EEI) and classifying products into energy efficiency classes;
• Additional power allowances for high-resolution and high-refresh-rate monitors; and
• Energy labeling requirements, including the design and content of the energy label, such as the EEI, star rating, energy consumption, screen size, resolution, QR code, and model identification.
The draft is based on IEC 62087-1:2015 and IEC 62087-7:2018 for the measurement of power consumption of computer monitors. Its objective is to improve energy efficiency, provide consumers with clear and comparable energy performance information, reduce electricity consumption, and support the UAE's energy conservation and sustainability objectives.
阿拉伯聯合大公國發布電視機和電子顯示器的能源效率和能源效率標籤要求草案
[法規草案] 阿拉伯聯合大公國發布了技術法規草案 UAE.S 5010 -12 :2026《電器能源效率標籤－第12部分：電視和電子顯示器的能耗效率》。
該草案規定了在阿拉伯聯合大公國市場上銷售的電視機和電子顯示器的能源效率和能源效率標籤要求。它適用於電視機和其他電子顯示器，但不包括螢幕面積小於100平方公分的顯示器、投影機、智慧型手機、平板電腦和筆記型電腦中的整合式顯示器、醫療影像顯示器、虛擬實境頭戴式顯示器、安全監控顯示器以及工業控制台。
UAE published draft Technical Regulations UAE.S 5010 -12 :2026 for "Labeling – Energy Efficiency Label for Electrical Appliances Part 12: Energy Consumption Efficiency for Televisions and Electronic Displays".
This draft UAE Standard establishes the energy efficiency and energy labeling requirements for televisions and electronic displays placed on the market in the United Arab Emirates. It applies to televisions and other electronic displays while excluding displays with a screen area below 100 cm², projectors, integrated displays in smartphones, tablets and laptops, medical imaging displays, virtual reality headsets, security and surveillance displays, and industrial control panels.
The draft specifies:
• Maximum allowable energy consumption limits for On Mode, Off Mode, Standby Mode, and Networked Standby Mode;
• Energy consumption calculation methods based on display technology, screen area, and additional allowances for high-resolution (4K/8K) and HDR displays;
• Requirements for automatic power-down functionality;
• A methodology for calculating the Energy Efficiency Index (EEI) and assigning products to energy efficiency classes;
• Verification testing requirements; and
• Mandatory energy labeling requirements, including the design and content of the energy label, such as the energy efficiency class, QR code, energy consumption values, screen size, screen resolution, and other product information.
The draft is based on IEC 62087-1:2015 and GSO IEC 62087-3:2024 for measuring the power consumption of televisions and electronic displays. Its objective is to improve the energy performance of electronic displays, provide consumers with transparent and comparable energy efficiency information, reduce electricity consumption, and support the UAE's energy efficiency and sustainability objectives.
Vietnam 越南
越南發布 FM 廣播頻道及頻率使用規劃
越南科學與技術部 (BKHCN) 發布 Thông tư 43/2026/TT-BKHCN，制定 87–108 MHz FM 廣播頻段的頻道劃分及使用規劃。該通告將 87–108 MHz 頻段劃分為 209 個 FM 頻道，並規定越南各地廣播機構的頻率配置及相關使用條件。
該通告將於 2026 年 9 月 5 日生效，主要屬於無線電頻譜規劃與管理措施，並非新增 FM 廣播接收設備的產品認證或符合性評定要求。
Vietnam’s Ministry of Science and Technology (BKHCN) issued Circular No. 43/2026/TT-BKHCN on July 20, 2026, establishing the channel allocation and frequency-use plan for FM broadcasting in the 87–108 MHz band.
The Circular divides the band into 209 channels, with center frequencies ranging from 87.1 MHz to 107.9 MHz at 100 kHz intervals, and specifies frequency-use plans for Vietnam Voice (VOV) and provincial broadcasting organizations.
The Circular will take effect on September 5, 2026, replacing Circular No. 37/2017/TT-BTTTT. The measure primarily concerns radio-frequency spectrum planning and management, rather than introducing new product certification requirements for FM radio equipment.
參考連結： https://mst.gov.vn/van-ban-phap-luat/25474.htm
家用電器 House Appliances
Australia & New Zealand 澳洲 / 紐西蘭
澳洲/紐西蘭關於前開門洗衣機實施「防誤啟動」強制要求
為防止兒童意外受困洗衣機滾筒內，AS/NZS 60335.2.7:2024 和 AS/NZS 60335.2.7:2020 修訂版 1 的第 20.106 條均新增了關於前開門洗衣機的要求。
該標準針對滾筒容積超過 60 立方分米的洗衣機提出了以下要求：
– 如果門直徑大於 200 毫米，則在機器停止且門未打開的情況下，無需兩次操作即可重新啟動機器，不會造成危險。
– 如果門直徑大於 200 毫米，則在機器停止且門已鎖定、無法開啟的情況下，無需兩次操作即可重新啟動機器，不會造成危險。
– 如果門是小型輔助門 (直徑小於 200 毫米)，則在洗衣機運行暫停的情況下，如果該門可以打開和關閉，則無需兩次單獨的操作即可重新啟動機器，不會造成危險。
無論滾筒容積或門開口尺寸如何，都應遵循合理的工程安全設計原則。
Requirements for front opening doors have been added to both AS/NZS 60335.2.7:2024 clause 20.106 and AS/NZS 60335.2.7:2020 amendment 1 clause 20.106 to address issues to prevent inadvertent entrapment of child in the washing machine drum.
The requirements in the standard are for drum sizes exceeding 60dm3:
– If door size is >200mm diameter there is no hazard if machine is stopped and door is not opened and machine is restarted without two operations required
– If door size is >200mm diameter there is no hazard if machine is stopped and door is locked and so cannot be opened and machine is restarted without two operations required
– If door size is a small ancillary door (and is <200mm diameter) there is no hazard if the washing machine is subject to a pause in operation, and that door is able to be opened and closed without two sperate actions to restart machine
Noting that irrespective of drum size or door opening size sound engineering principles of safe design should
be followed.
2026年7月1日澳洲/紐西蘭可攜式空調與除濕機安全標準更新
AS/NZS 60335.2.40: 2023 和 AS/NZS 60335.2.40:2025 已納入可攜式空調和可攜式除濕機的振動測試及其他防火測試要求。
壓縮機振動測試要求目前正在審查中，因為相同的測試標準可能不適用於定速壓縮機和變速壓縮機。在審查完成之前，本公告中規定的臨時方法可適用於可攜式空調及可攜式除濕機。
附註：如果相關標準發布了其他修訂，則這些修訂將在發布後適用於本公告，並將考量規定的過渡期。
Requirements for vibration test and other tests to address fire risks for portable air conditioners and portable dehumidifiers have been included in AS/NZS 60335.2.40: 2023 and AS/NZS 60335.2.40:2025.
The compressor vibration test requirements are currently under review because the same test criteria may not be appropriate for both fixed-speed and variable-speed compressors. Until that review is completed, the interim approach set out in this bulletin is considered acceptable for portable air conditioners and portable
dehumidifiers.
NOTE: If other amendments are published for the relevant standards those amendments become applicable
to this bulletin when published considering transition periods specified.
Serbia 塞爾維亞
塞爾維亞MoME 發布關於熱水器和熱水儲存槽生態設計要求的新規定
2026 年 5 月 15 日，塞爾維亞礦業與能源部 (MoME) 發布了關於熱水器和熱水儲存槽生態設計要求的新規定（官方公報第 45/2026-81 號），以提高能源效率、標準化效能測量，並與歐盟能源政策保持一致。該規定於2026年5月23日生效，並將自2027年6月1日起施行。
本規則手冊與歐盟委員會條例 (EU) 814/2013的所有原則和基本要求相一致，該條例適用於歐洲議會和理事會關於熱水器和熱水儲存槽生態設計要求的指令2009/125/EC，以及歐盟委員會條例(EU) 2016/2282。
On May 15, 2026, the Ministry of Mining and Energy (MoME) issued a new regulation on ecodesign requirements for water heaters and hot water tanks (Official Gazette of the Republic of Serbia No. 45/2026-81) to improve energy efficiency, standardize performance measurement, and align with European Union energy policies. The regulation entered into force on May 23, 2026, and will apply from June 1, 2027.
This rulebook aligns with all principles and essential requirements of Commission Regulation (EU) No 814/2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water tanks, as well as Commission Regulation (EU) 2016/2282.
參考連結： https://www.paragraf.rs/glasila/rs/sluzbeni-glasnik-republike-srbije-45-2026.html
能源效率要求 Energy Efficiency Requirements
Peru 秘魯
秘魯發布公眾諮詢，法規更新及新增11類產品的能效要求
[法規草案] 秘魯能源和礦業部部長於2026年7月21日簽署《第285-2026-MINEM/DM號部長決議》，正式啟動《修改並納入最高法令第009-2017-EM號的最高法令草案》的公眾諮詢程序。
Resolución Ministerial N.° 285-2026-MINEM/DM – Normas y documentos legales – Ministerio de Energía y Minas – Plataforma del Estado Peruano
新增11類產品的能效標籤要求 (附件10-20):
電視機、電磁爐、微波爐、電烤箱、可攜式電烤箱、落地扇/壁扇、吊扇、洗碗機、LED照明及其控制裝置、燃氣爐具，以及電子電氣及辦公設備的待機功耗。
評議截止日期：2026年10月13日。
預計通過日期：待定。
Peru’s MINEM Launches Public Consultation to Expand Energy Efficiency Labeling for 11 Product Categories
On July 21, 2026, the Minister of Energy and Mines of Peru signed Ministerial Resolution No. 285-2026-MINEM/DM, officially initiating a 90-day public consultation process for the "Draft Supreme Decree modifying and incorporating provisions into Supreme Decree No. 009-2017-EM."
The proposed regulation aims to update the Technical Regulation on Energy Efficiency Labeling by introducing mandatory energy efficiency labeling requirements for 11 new product categories (Annexes 10 to 20):
Televisions, Induction hobs, Microwave ovens, Electric ovens, Portable electric ovens, Pedestal/wall fans, Ceiling fans, Dishwashers, LED lighting and control gear, Gas cooking appliances, Standby power consumption for electrical, electronic, and office equipment
Consultation Deadline: October 13, 2026
Proposed Adoption Date: To be determined (TBD)
參考連結： https://www.gob.pe/institucion/minem/normas-legales/8413843-285-2026-minem-dm
Brazil 巴西
巴西發布 LED 燈泡及燈具最低能源效率新規
巴西能源效率指標與標準管理委員會 (CGIEE) 於 2026 年 6 月 25 日發布了第2/2026號決議，為巴西境內的LED燈泡和LED燈具制定了新的最低能源效率要求(MEPS)。 該決議將分兩個階段實施
– 第一階段 （自 2028 年 1 月 1 日起）：最低光效須達 120 lm/W。
– 第二階段（自 2030 年 1 月 1 日起）：最低光效提高至 140 lm/W。
該法規還規定了產品生產、進口和銷售的過渡期限。這些要求適用於規定範圍內的產品，並與現有的INMETRO合格評定和標籤制度一併實施，但法規中規定的豁免情況除外。
The Brazilian Management Committee for Energy Efficiency Indicators and Levels (CGIEE) issued Resolution No. 2/2026 on 25 June 2026, establishing new minimum energy efficiency requirements for LED lamps and LED luminaires in Brazil. The implementation will take place in two phases. From 1 January 2028, the calculation of the minimum energy efficiency indices will use a luminous efficacy limit of 120 lm/W. From 1 January 2030, this value will be increased to 140 lm/W. The regulation also provides transitional deadlines for manufacturing, importation, and commercialization. The requirements apply to products within the defined scope and operate together with the existing INMETRO conformity assessment and labeling regime, subject to the exclusions set out in the regulation.
South Korea 韓國
韓國能源署(KEA)發布MEPS《能源效率管理器材運用規定》修正草案預告
[法規草案] 韓國能源署(KEA)發布《能源效率管理器材運用規定》部分修正草案行政預告第 2026-798 號。
主要修正內容：
1. 調整後市場管理（事後管理）檢查項目等制度改善；自測量後市場管理（測定事後管理）的檢查項目中，排除沒有允許誤差（容許公差）的能源效率等級項目；刪除 9 項產品之中長期目標能源消耗效率的實施日期。
2. 導入以 QR Code 為基礎的電子標籤等制度；新增申報宣告值 (Declared Value) 的義務條款，使申報資料與標籤上標示的資料一致; 整理及修訂各品項能源消耗效率等級標籤的記載事項；新增 QR Code，並改善能源消耗效率等級標籤的設計。
3. 調整電冰箱等 14 項產品的能源效率標準。
詳細內容請參考氣候能源環境部之行政預告及附件說明資料。
<Draft> The Korea Energy Agency (KEA) has issued Administrative Notice No. 2026-798 on the proposed partial amendment to the “Regulations on the Operation of Energy Efficiency Management Equipment.”
<Key Amendments>
1. Improvement of the post-market management system, including adjustments to inspection items
Exclude energy efficiency rating items with no allowable tolerance from the inspection items for post-market measurement management.
Remove the implementation dates for the mid- to long-term target energy consumption efficiency standards for nine product categories.
2. Introduction of QR code-based electronic labels and related system improvements
Establish a new requirement for reporting Declared Values, thereby aligning the reported data with the data displayed on the label.
Revise and streamline the information required on energy efficiency rating labels for each product category.
Improve the design of energy efficiency rating labels, including the introduction of QR codes.
3. Adjustment of energy efficiency standards for 14 product categories, including electric refrigerators
For further details, please refer to the Administrative Notice issued by the Ministry of Climate, Energy and Environment and the attached guidance materials.
參考連結： https://eep.energy.or.kr/notice/view.aspx?cate=1&no=326
燈具 / LED Luminaires /LED
Australia & New Zealand 澳洲 / 紐西蘭
澳洲/紐西蘭更新燈具控制裝置安全標準 AS/NZS 61347.1:2016
Standards Australia 於 2026 年 7 月 24 日發布 AS/NZS 61347.1:2016 Amd 3:2026，更新《Lamp controlgear, Part 1: General and safety requirements》。該標準目前已列為 Current，並重新發布納入 Amendment No. 3 的版本。
本次修訂系將 IEC 61347-1:2015 Amendment 1:2017 的相關內容納入 AS/NZS 61347.1:2016，涉及燈具控制裝置的多項安全要求，包括 SPD（Surge Protective Device）要求、SELV 標示、爬電距離與電氣間隙、接線端子、MCPCB 絕緣分類，以及溫升／加熱試驗條件等。
製造商應注意，使用 AS/NZS 61347.1:2016 進行澳洲／紐西蘭市場產品安全評估時，應確認測試報告及產品設計是否已涵蓋 Amd 3:2026 的新增要求，並與認證機構確認現有證書及新申請案件的實施方式。
Standards Australia published AS/NZS 61347.1:2016 Amd 3:2026 on 24 July 2026, updating Lamp controlgear, Part 1: General and safety requirements. The standard is currently listed as Current, with the version incorporating Amendment No. 3 now published.
The amendment incorporates relevant provisions of IEC 61347-1:2015 Amendment 1:2017 into AS/NZS 61347.1:2016 and introduces several updates to the safety requirements for lamp controlgear, including SPD (Surge Protective Device) requirements, SELV marking, creepage and clearance requirements, terminal requirements, MCPCB insulation classification, and heating/temperature-rise test conditions.
Manufacturers should ensure that products assessed against AS/NZS 61347.1:2016 for the Australian/New Zealand markets meet the requirements introduced by Amd 3:2026, and should confirm with their certification body how the amendment will be applied to existing certificates and new applications.
參考連結： https://www.standards.org.au/sector-updates/electricity-and-gas?utm_source=chatgpt.com
Colombia 哥倫比亞
哥倫比亞發布第40286號決議，修訂照明及公共照明技術規章 RETILAP
哥倫比亞能源暨礦業部（Ministerio de Minas y Energía）於2026年6月23日發布 Resolución No. 40286 de 2026，修訂照明及公共照明技術規章（RETILAP），並於2026年7月1日生效。
本次修訂主要針對新版RETILAP的條文、定義、適用範圍及部分技術與符合性評鑒要求進行調整，並修正部分文字錯誤及不必要的測試或要求，以進一步釐清法規適用並降低合規負擔。
在產品認證方面，自2026年1月1日起，新產品的符合性評定不得再依據舊版 Resolución 180540 de 2010 辦理，相關產品應依新版RETILAP取得符合性證明；已依舊版規定取得的有效證書，則依相關過渡條款處理。
此次修訂主要影響照明產品製造商、進口商及相關認證機構，業者應確認現有RETILAP證書及後續產品認證是否符合新版要求。
On June 23, 2026, Colombia’s Ministry of Mines and Energy (Ministerio de Minas y Energía) issued Resolution No. 40286 of 2026, amending the Technical Regulation for Lighting and Public Lighting (RETILAP). The Resolution entered into force on July 1, 2026.
The amendments mainly revise provisions, definitions, scope of application, and certain technical and conformity assessment requirements under the updated RETILAP. They also correct editorial errors and remove or clarify certain testing and compliance requirements to facilitate implementation.
For product certification, as of January 1, 2026, new conformity assessment procedures may no longer be conducted under the previous Resolution No. 180540 of 2010. Relevant products must comply with the updated RETILAP requirements. Existing certificates issued under the previous regulation remain subject to the applicable transitional provisions.
The amendment mainly affects manufacturers, importers, and conformity assessment bodies of lighting products. Companies should review their existing RETILAP certificates and ensure that future product certifications comply with the updated requirements.
參考連結： https://members.wto.org/crnattachments/2026/TBT/COL/modification/26_03636_00_s.pdf
Ecuador 厄瓜多
厄瓜多發技術法規PRTE INEN 069 (2R)《公共照明設備》第二次修訂草案
[法規草案] 厄瓜多生產、外貿和投資部已發布厄瓜多技術法規PRTE INEN 069 (2R)《公共照明設備》第二次修訂草案。
根據草案，擬議的技術法規將適用於在厄瓜多銷售的以下產品，無論其是國產還是進口：
– 高壓鈉燈及其組件，包括高壓鈉燈、安定器、啟動器（點火器）、電容器、光控器、光控插座和開關繼電器；以及
– LED燈具和泛光燈及其元件，包括LED驅動器、突波保護器（SPD）、LED模組、短路帽、光控器和光控插座。
該技術法規草案不適用於：
– 用於公共照明的整合式太陽能燈具及其組件；以及
– 同時滿足下列所有條件的泛光燈：額定功率小於200W、IP防護等級低於66、IK防護等級低於0.9、顯色指數小於80。
目前該草案正在徵詢意見中。
The Ministry of Production, Foreign Trade and Investments has notified the draft Second Revision of Ecuadorian Technical Regulation PRTE INEN 069 (2R), “Lighting Equipment for Public Lighting.”
According to the draft, the proposed technical regulation would apply to the following products, whether of domestic origin or imported, when marketed in Ecuador:
– High-pressure sodium vapor luminaires and their components, including high-pressure sodium vapor lamps, ballasts, starters (igniters), capacitors, photocontrols, photocontrol receptacles, and switching relays; and
– LED luminaires and floodlights and their components, including LED drivers, surge protective devices (SPDs), LED modules, short-circuit caps, photocontrols, and photocontrol receptacles.
The draft technical regulation would not apply to:
– Integrated solar luminaires for public lighting and their components; and
– Floodlights that simultaneously meet all of the following conditions: rated power of less than 200 W, IP rating of less than 66, IK rating of less than 0.9, and CRI of less than 80.
The draft is currently open for public comment.
參考連結： https://eping.wto.org/en/Search?viewData=%20G/TBT/N/ECU/393/Rev.2
India 印度
印度－BIS 延長 LED 燈具新版標準過渡期
印度標準局 (BIS) 於 2026 年 7 月 6 日宣布，延長部分 LED 燈具新版 IS 10322 (Part 5) Series: 2026 標準在強制註冊計畫 (CRS) 下的實施過渡期。
受影響產品包括固定式及嵌入式 LED 燈具、道路及街道照明燈具、LED 投光燈、手提燈、燈串及緊急照明燈具等。
原定於 2026 年 8 月 2 日結束的新舊標準並行期限，現已延長至 2027 年 2 月 2 日，讓製造商有額外 6 個月完成產品測試及新版標準轉換。之後，相關產品須符合適用的 2026 年版標準。
On 6 July 2026, the Bureau of Indian Standards (BIS) extended the implementation deadline for certain revised IS 10322 (Part 5) Series: 2026 standards covering LED luminaires under the Compulsory Registration Scheme (CRS).
The affected products include fixed general-purpose and recessed LED luminaires, road and street lighting luminaires, LED flood lights, hand lamps, lighting chains, and emergency lighting luminaires.
The concurrent-running period for the existing and revised standards has been extended from 2 August 2026 to 2 February 2027. Manufacturers and BIS licensees therefore have an additional six months to complete testing and transition to the revised standards. After 2 February 2027, compliance with the applicable revised standards will be mandatory.
其他 / 多主題產品 Others / Products with Multiple Subjects
China 中國
中國發布多項標準/法規草案
[法規草案] 中國發布多項標準／法規草案：
• LED 平板燈具能源效率最低允許值及能源效率等級
• 單元式空調能源效率最低允許值及能源效率等級
• 容積式空氣壓縮機能源效率最低允許值及能源效率等級
• 電動自行車鋰離子電池拆卸及壓碎安全技術要求
• 電動車傳導充電電磁相容性要求及試驗方法（替代 GB/T 40428-2021）
• 電子設備用鋰離子電池及電池組安全－第 7 部分：電子煙
• 電信設備電磁輻射技術要求及試驗方法：基地台
• 短波無線電接收及測向站電磁環境要求（替代 GB 13614-2012）
• 民用無人機雷射對抗設備通用技術要求
• 民用無人機高功率微波對抗設備通用技術要求
• 民用無人機資料鏈路網路安全要求
• 民用無人機偵測與避障要求
• 民用無人機飛行控制系統資料記錄要求
• 電動汽車動力電池拆卸及破碎安全要求
世界貿易組織 (WTO) 亦已發布相關通報，目前正在徵詢意見。
China has published several draft stabdard/regulations:
– Minimum allowable values of energy efficiency and energy efficiency grades of LED flat panel luminaires
– Minimum allowable values of energy efficiency and energy efficiency grades for unitary air conditioners
– Minimum allowable values of energy efficiency and energy efficiency grades for displacement air compressors
– Safety technical requirements for dismantling and crushing of lithium-ion batteries for electric bicycles
– Electromagnetic compatibility requirements and test methods of conductive charging for electric vehicles (replacing GB/T40428-2021)
– Safety of lithium-ion batteries and battery packs for electronic appliances Part 7: Electronic cigarettes
– Technical requirements and test methods for electromagnetic radiation of telecommunications equipment : base stations
– Electromagnetic environment requirements for-Short-wave radio receiving and direction finding stations (replacing GB 13614-2012)
– General technical requirements for laser countermeasures equipment for civil unmanned aircrafts
– General technical requirements for high-power microwave countermeasures equipment for civil unmanned aircrafts
– Cybersecurity requirements for data links of civil unmanned aircraft
Detect and obstacle avoid requirements for civil unmanned aircraft;
– Data recording requirements of the flight control system for civil unmanned aircraft
– Safety requirements for dismantling and crushing of traction battery used in electric vehicle
WTO nofifications are also published and are under collection of comments.
South Korea 韓國
韓國公布電動車充電器相關操作指南與多項電氣產品測試標準草案
[法規草案] 韓國技術標準院 (KATS) 預告將制定並修訂與電動車 (EV) 充電器相關的操作指南及 5 項電氣產品安全標準。主要修訂內容包括在操作指南中新增電動車充電器安全標準，並支援路邊停車充電器等新產品的導入。此次修訂旨在使韓國國家安全標準 (KC) 與國際標準（IEC 61851 及 IEC 62196 系列）接軌。
The Korean Agency for Technology and Standards (KATS) is pre-announcing the establishment and revision of operational guidelines and five electrical product safety standards related to electric vehicle (EV) chargers. The key changes include adding new EV charger safety standards to the operational guidelines and supporting the launch of new products such as parking curb chargers. The revisions also aim to align Korea's national safety standards (KC) with international standards (IEC 61851 and IEC 62196 series).
參考連結： https://kats.go.kr/content.do?cmsid=239&mode=view&page=2&cid=26378
韓國發布關於擬修訂《家用電器和家用物品安全管理操作指南》的行政通知
[法規草案] 韓國技術標準院 (KATS) 預先宣布對《家用電器及家用產品安全管理操作指南》進行部分修訂，以確保電器產品安全管理系統的順利運作。主要修訂內容包括：為新指定的安全認證機構指派新的認證代碼；更新地區和海外國家名稱；以及重新整理安全標準清單。這些修訂主要涉及行政管理和規範性更新，旨在維持操作指南的時效性和準確性。
The Korean Agency for Technology and Standards (KATS) is pre-announcing a partial amendment to the Operational Guidelines for the Safety Management of Electrical Appliances and Household Products to ensure the smooth operation of the electrical product safety management system. The key changes include assigning new certification codes to a newly designated safety certification body, updating regional and overseas country names, and reorganizing the safety standards list. These are primarily administrative and housekeeping updates to keep the operational guidelines current and accurate.
參考連結： https://kats.go.kr/content.do?cmsid=239&mode=view&page=3&cid=26396
New Zealand 紐西蘭
紐西蘭正就電動車充電器的提議要求徵求公眾意見
[法規草案] 紐西蘭政府已同意對最大輸出功率超過 2.4kW 的電動車充電器進行監管，以確保其具備智慧功能並符合能源效率資訊要求。能源效率與節能管理局 (EECA) 負責制定和執行擬議的技術要求。
能源效率與節能管理局 (EECA) 已發布諮詢文件，就紐西蘭電動車充電器的提議要求徵詢公眾意見。
公眾意見徵詢截止日期為 2026 年 9 月 4 日。
New Zealand Government has agreed to regulate EV chargers with a maximum output power above 2.4kW for smart functionality and energy performance information requirements. EECA is responsible for developing and enforcing the proposed technical requirements.
Energy Efficiency Conservation Authority (EECA) has released a consultation paper seeking feedback on proposed requirements for EV chargers supplied in New Zealand.
The consultation paper is open to public comments till 04 September 2026.
Taiwan 台灣
台灣發布《應施檢驗儲能裝置類之放置型鋰儲能裝置等商品之相關檢驗規定》預告修正
[法規草案] 經濟部標準檢驗局 (BSMI) 預告修正「應施檢驗儲能裝置類之放置型鋰儲能裝置等商品之相關檢驗規定」，擴大放置型鋰儲能裝置及二次鋰儲能電池組／電池系統之檢驗容量範圍，並更新CNS 62619、CNS 63056、CNS 16280等相關安全及併網標準。檢驗方式採型式認可逐批檢驗或驗證登錄雙軌並行，並新增延燒試驗、功能性安全及RoHS標示等要求。既有VPC證書可透過差異測試轉換為型式試驗報告。
強制日期：依電池容量分階段實施：
20 kWh以下：2026年7月1日
20～100 kWh：2027年7月1日
100～360 kWh：2028年7月1日
道路車輛動力用二次鋰電池組：2027年7月1日
To support the energy transition policy and ensure the safe deployment of large-scale energy storage systems, the BSMI proposes to expand the scope of mandatory inspection for stationary lithium energy storage systems and secondary lithium batteries intended for use in such systems. Products with a rated energy capacity of 100 kWh or below are already subject to mandatory inspection. Under this proposal, the maximum rated energy capacity covered by mandatory inspection requirements would be increased from 100 kWh to 360 kWh. In addition, the technical requirements for stationary lithium energy storage systems would be revised to align the cyber security and grid interconnection requirements with newly published CNS standards. Secondary lithium battery packs for road vehicle propulsion would remain subject to the existing mandatory inspection requirements, and their inspection scope and technical requirements would not be changed under this proposal.
參考連結： https://www.bsmi.gov.tw/wSite/public/Data/f1786530926435.pdf
台灣發布《電力轉換系統 (PCS) 及太陽光電變流器相關檢驗規定》預告修正
[法規草案] 經濟部標準檢驗局 (BSMI) 預告修正電力轉換系統 (PCS) 及太陽光電變流器相關檢驗規定，將PCS檢驗容量上限由100 kW擴大至360 kW，並更新安全、EMC、併網及資安等適用標準，包含CNS 16280、CNS 16281及相關資安要求。檢驗方式採型式認可逐批檢驗或驗證登錄雙軌並行，並同步調整RoHS標示及既有證書轉換規定。
強制日期：
PCS ≤20 kW：2026年7月1日
PCS >20～100 kW、太陽光電變流器 ≤100 kW：2027年7月1日
PCS >100～360 kW：2028年7月1日
To support the goal of achieving net-zero carbon emissions by 2050, renewable energy power generation
equipment and energy storage systems are expected to be increasingly deployed not only at outdoor sites but also in indoor environments, including households and factories. As Power Conversion Systems (PCS) and Photovoltaic (PV) inverters are critical components for energy conversion, system control, and stable operation of energy storage and solar photovoltaic systems, their safety and reliability are essential to protecting users and maintaining system stability. In view of these developments, the Bureau of Standards, Metrology and Inspection (BSMI) proposes to expand the mandatory inspection scope for PCS and PV inverters to cover models with a rated capacity not exceeding 360 kW. This measure is intended to strengthen product safety management, ensure consumer safety, and enhance the safe and stable operation of renewable energy and energy storage systems. Applicants may choose either of the following two conformity assessment procedures: Registration of Product Certification (RPC) or Type-Approved Batch Inspection (TABI).
參考連結： https://www.bsmi.gov.tw/wSite/public/Data/f1787018756611.pdf
編輯推薦
追蹤我們
+886-2-2172-1001 (台灣)
+852 21921022 (香港)
+86 4008831300 (中國)
熱門分享
