《安全很有事》德國萊因TÜV官方部落格丨TÜV 莱茵大中华区博客

化妝品作為我們日常生活的重要組成部分，其安全與質量備受關注。世界各國都已製定了嚴格的化妝品法律法規以保護消費者的健康，中國出口歐盟的美容、化妝及護膚用品從2017年至2021年增長超過40%，出口到歐盟的化妝品必須符合歐盟化妝品法規要求,以保證消費者在正常使用下的健康。

 

產品範圍

皮膚護理:

• 面部護理：清潔（卸妝，潔面，剃須膏等），護理（爽膚，精華液，乳液，霜，面膜，防曬等）
• 身體護理：沐浴露，磨砂膏，身體乳

 

彩妝和香水產品：

• 面部（眼部和唇部）彩妝
• 美甲產品
• 香水和古龍水

 

檢測服務

• 物理-化學測試：分析禁用/限制物質、活性物質、穩定性和兼容性等；評估化妝品的成分是否符合法規對禁用/限用物質的限值要求
• 微生物測試：檢測化妝品中潛在的有害微生物污染物，評估防腐劑的有效性
• 功效測試：為產品的功效宣稱提供證據支持

 

化妝品安全報告 (CPSR)

歐盟化妝品規範 EC 1223/2009 規定，化妝品及個人護理產品必須經過詳盡的化妝品安全報告 (CPSR)，才可以進入歐盟市場。 CPSR 包括: 化妝品安全資訊（物理/化學特性和穩定性、微生物品質、微量與包裝材料相關資訊等等）以及化妝品安全評估。

德國萊茵TÜV是全球領先的第三方檢測和認證機構，150年來，我們在全世界為企業的產品安全與質量提供可信賴的技術服務。我們在大中華區擁有包括國際認證毒理學家及歐盟認證化妝品安全評估師在內的資深專家團隊，可以依據眾多國際市場的法規標準，為您的化妝品提供一站式的測試與合規諮詢方案。請馬上與我們的化妝品安全評估專家聯絡!

德國萊因TÜV香港公司已被阿曼蘇丹國標準與計量總局 (DGSM) 指定為新阿曼符合性計畫的首個公告機構。即日起，德國萊因TÜV可以向受管制產品的製造商和進口商提供阿曼型式檢驗證書。

 

DGSM 作為阿曼蘇丹國商業、工業和投資促進部 (MoCIIP) 的下屬機構，正在實施新的阿曼符合性計畫的技術法規，該法規生效日為2022 年 6 月 5 日。受管制的產品需要從 DGSM 指定的公告機構獲得認證。合格證書有效期為一年，需要每年進行更新。

 

第 1 階段的受管制產品包括洗碗機、洗衣機和真空吸塵器。製造商必須向公告機構申請阿曼型式檢驗證書。這些產品必須通過安全和EMC測試，製造商需要提交產品技術和風險評估證明文件。

 

根據聯合國商品貿易統計資料，2021 年阿曼進口了 2620 萬美元的洗碗機、1300 萬美元的洗衣機和 200 萬美元的吸塵器。阿曼符合性計畫的實施將會提高市場上的產品品質。阿曼符合性計畫的第 2 和第 3 階段預計在 2023 年和 2024 年進行，管制產品待定。

 

德國萊因TÜV也是海灣G-mark、阿曼和巴林能效、阿拉伯聯合大公國ECAS&EQM、沙特SALEEM、科威特KUCAS等指定認證機構，可為中東市場（沙烏地阿拉伯、伊拉克、科威特、阿拉伯聯合大公國、阿曼、巴林、卡達、葉門等）提供完整的市場准入解決方案。如果您對中東市場的認證有任何疑問，請聯繫德國萊因TÜV進行諮詢。

 

 

阿曼符合性計畫第 1 階段的受管制產品清單涵蓋以下類別的低壓設備和電器：

 

資訊 / 電信 ITE / Telecom

Brazil 巴西

近期ANATEL發佈多個法案，涉及3.7-3.8GHz及27.5G-27.9GHz頻段的產品。

Act No. 8991 on June 27, 2022. This Act establishes the technical and operational requirements for the conditions of use band from 3,700 MHz to 3,800 MHz by low-power terrestrial service stations.

Anatel – Ato nº 8991, de 27 de junho de 2022

Act No. 8995 on June 27, 2022. This Act establishes the technical and operational requirements for the conditions of use of the 27.5-27.9 GHz sub-band. 

Anatel – Ato nº 8995, de 27 de junho de 2022

 

China 中國

國家市場監管總局/國家標準化管理委員會2022年7月19日發佈了GB4943.1-2022《音視頻、資訊技術和通訊技術設備 第1部分：安全要求》。新標準將取代GB4943.1-2011和GB8898-2011。本標準修改採用IEC國際標準：IEC 62368-1:2018。新標準將於2023年8月1日起強制實施。

CCC認證的換版實施規則尚未發佈。該標準涉及CCC認證的產品是音視頻設備、資訊技術設備和電信設備，對應CCC認證代碼為08, 09和16類。

State Administration for Market Regulation (SAMR)/Standardization Administration of China (SAC) had released the national standard GB4943.1-2022 Audio/video,information and communication technology equipment—Part 1: Safety requirements on July 19, 2022 which will replace the old national standards GB4943.1-2011 and GB8898-2011. The revision of this standard adopts the internationl standard IEC62368-1:2018. This new standard will come to force on August 1, 2023.

The implemetion requirements of standard upgrade under CCC (China Compulsary Certification) scheme will be released soon and we will update accordingly. This standard involves AV, IT and telecom products which CCC category code is 08, 09 and 16.

The New EMC Standard GB/T 9254.1-2021 electromagnetic compatibility of information technology equipment, multimedia equipment and receivers Part 1: transmission requirements was issued on December 31, 2021 which replaced GB/T 9254-2008 and GB/T 13837-2012 from July 1, 2022. The CCC application for standard upgrade had been accepted starting from June, 2022.

 

Costa Rica 哥斯大黎加

哥斯大黎加電信監管局 ((SUTEL) 發佈RCS-141-2022 (部分修改移動通訊終端審批程序)。此次新規對移動通訊終端的認證要求進行了修改，主要有以下幾點：

• 行動電話產品的新申請認證需要蓋章的紙本海牙認證；
• DGC註冊需每4年更新一次 (需有經過公證的聲明信)，註冊公司也需要每4年更新。

此項新規定已於2022年6月16日起生效。

Superintendencia de Telecomunicaciones (SUTEL) in Costa Rica has published RCS-141-2022 “Modificación parcial del procedimiento de homologación de terminales de telecomunicaciones móviles.” This new regulation modifies the requirements for homologation of mobile telecommunication terminals. Cellular product applications for new applicants will now require hard copies with apostille stamps, and the apostille exemption for cellular applications is no longer in effect. Registration with the Dirección General de Calidad (DGC) will need to be updated every 4 years through a notarized declaration letter, and companies with current registration will need to perform this update every 4 years as well. This regulation came into effect on June 16, 2022.

 

Malaysia 馬來西亞

馬來西亞SIRIM再次延長部分IPv6蜂窩設備的臨時型式認證 (1年)。

Malaysia SIRIM Extends Interim Type Approval Period for IPv6 Cellular Equipment.

The Standard and Industrial Research Institute of Malaysia (SIRIM) published an announcement on July 10, 2022 informing that the implementation of the interim Type Approval period for IPv6 Cellular Equipment without Wi-Fi interface has been extended for 1 year. As such, all new applications and renewal of Certificate of Conformity (CoC) are allowed with a maximum validity of one (1) year. For IPv6 equipment over other medium (e.g: Fiber Optic etc. except Ethernet LAN), interim approval will also be issued with a validity period of one (1) year.

 

Taiwan  台灣

[法規草案] BSMI預告修正「應施檢驗視聽音響商品之相關檢驗規定」草案。產品包含裝入音箱之單一揚聲器、裝入同一音箱之多個揚聲器、使用磁性、光學或半導體媒體之錄音或聲音重放器具等。

詳情請參考此連結 : https://www.bsmi.gov.tw/wSite/public/Data/f1658384820186.pdf

​The BSMI proposes to adopt CNS 15598-1:2020 and CNS15936:2016 as the inspection standards for audio and video equipment to ensure the safety of consumers.
For the video recording or reproducing apparatus, the standard to be adopted contains volume limits
requirements to protect consumers from hearing loss.

For details please see below link:
https://www.bsmi.gov.tw/wSite/public/Data/f1658386173923.pdf 

 

Vietnam 越南

2022年6月，越南資訊和通訊部批准了第2361/BTTTT-KHCN號通知，是關於指導應用和實施第02/2022/TT-BTTTT號通知的說明。涉及5G移動通信基站設備、對於集成了DVB-T2接收功能的電視接收機、鋰電池等產品。該通知自2022年7月1日起實施。

In June 2022, the Vietnamese Ministry of Information and Communications approved Circular No. 2361/BTTTT-KHCN on the Instructions on Guiding the Application and Implementation of Circular No. 02/2022/TT-BTTTT.

It established the following:

• For the requirements of testing/testing under extreme conditions in the relevant technical regulations, organizations and individuals may use appropriate declarations in the technical documents of products, goods or results. test/test results of designated and recognized testing organizations (laboratory); or accredited domestic and foreign testing laboratories in accordance with ISO/IEC 17025;
• For 5G mobile communication base station equipment, organizations and individuals are allowed to use test/test results of domestic and foreign laboratories recognized in accordance with ISO/IEC 17025 or ISO/IEC 17025 of the manufacturer for certification and announcement of conformity according to national technical regulations QCVN 128:2021/BTTTT;
• For independent 5G mobile communication network terminal equipment, organizations and individuals are allowed to use test/test results of domestic and foreign laboratories recognized in accordance with ISO/standards;
• For hybrid 5G mobile communication network terminals, organizations and individuals are allowed to use test/test results of domestic and foreign laboratories recognized in accordance with ISO/standards;
• For the publication of regulation conformity according to national technical regulations QCVN 22:2021/BTTTT organizations and individuals are allowed to use measurement/test results of recognized domestic and foreign laboratories in accordance with ISO/IEC 17025 or the manufacturer’s standards;
• For television receivers with integrated DVB-T2 terrestrial digital television (iDTV) signal reception function, organizations and individuals may use the test results of the chassis (chassis/ platform) according to the standards;
• For lithium battery products subject to mandatory declaration of conformity, organizations and individuals are only allowed to use use test/test results of designated or accredited testing laboratories or registered testing laboratories signed with the Ministry of Information and Communications to make declaration of conformity according to national technical regulations QCVN 101:2020/BTTTT. In case an organization or individual imports a small quantity and cannot provide a sufficient number of samples for testing/testing, the organization or individual should contact the quality inspection agency (the Department of Telecommunications) and provide documentation to consider the acceptance of the results issued by an overseas testing organization accredited in accordance with ISO/IEC 17025 for products with the same symbol and manufacturer to complete the registration procedure for quality inspection, regulation conformity announcement; and organizations and individuals importing must be responsible for the safety of imported products.

The Circular entered into force on 1 July 2022.

 

 

燈具 / LED Luminaiaries / LED

Taiwan 台灣

[法規草案] 2022年6月28日，台灣經濟部公佈廢止《自鎮流螢光燈最低能效標準及能效等級標示及檢驗要求》。各方若有意見應在 2022 年 8 月 29 日之前通過電話或電子郵件提交。

On 28 June 2022, Taiwan Ministry of Economic Affairs published a proposal to abolish the “Requirements on Minimum Energy Performance Standard and Energy Efficiency Rating Labelling and Inspection for Self-Ballasted Fluorescent Lamps”.

Comments should be submitted by 29 August 2022 via phone or email.

 

Tajikistan 塔吉克斯坦

自 2022 年 6 月 1 日起，禁止向塔吉克斯坦境內進口、生產和銷售代碼為 8539322001 的汞燈。

On 28 Ma y 2022, the Tajikistan Government approved Resolution No. 264, in accordance with Article 18 of the Constitutional Law of the Republic of Tajikistan on the Government of the Republic of Tajikistan” and Article 5 of Law No. 44, 2002 on Waste Production and Consumption.

From 1 June 2022, this Resolution prohibits the import, production, and sale of mercury lamps with the code 8539322001 into the territory of Tajikistan.

 

 

能源效率要求 Energy Efficiency Requirements

China Hong Kong 中國香港

強制性能源效益標籤計畫第四階段《產品能源標籤實務守則》的修訂

機電工程署 (機電署) 就強制性能源效益標籤計畫第四階段《產品能源標籤實務守則》的修訂展開為期兩個月的業界諮詢，至2022年8月14日結束。

第四階段的涵蓋範圍新增三類產品，包括發光二極體 (LED) 燈、燃氣灶及即熱式燃氣熱水器。

Revision of the Code of Practice on Energy Labelling of Products for the Fourth Phase of the Mandatory Energy Efficiency Labelling Scheme.

The Electrical and Mechanical Services Department (EMSD) launched a two-month trade consultation on the revision of the Code of Practice on Energy Labelling of Products for the fourth phase of the Mandatory Energy Efficiency Labelling Scheme (MEELS). The consultation period will end on 14 August 2022.

The fourth phase of the MEELS include three additional types of products, namely Light Emitting Diode (LED) lamps, gas cookers and gas instantaneous water heaters.

 

Jamaica 牙買加

[法規草案] 2022 年 6 月 27 日，牙買加標準局宣佈通過牙買加能源標籤標準規範草案 – 製冷設備 – 要求，DJS CRS 57: 2018/Amd 1。無異議截止日期為 2022 年 8 月 24 日。

On 27 June 2022, The Bureau of Standards Jamaica announced the adoption of Draft Jamaican Standard Specification for Energy Labelling – Refrigeration Appliances – Requirement, DJS CRS 57: 2018/Amd 1.  The closing date for non-objection is 24 August 2022.  The announcement is available here: BSJ announces the adoption of the following Draft Jamaican Standard | Bureau of Standards Jamaica

 

Uruguay 烏拉圭

[法規草案] 2022 年 6 月 24 日，烏拉圭工業、能源和礦業部向 WTO 通報一項法令草案，該法令草案提議修改電氣設備和電器的能源效率標籤: 法令 116/2011。

通知的法令草案涉及使用能源運行的設備、電器和車輛的進口和行銷要求，並包含在國內能效標識制度的規定中。

On 24 June 2022, the Uruguayan Ministry of Industry, Energy and Mining notified the WTO of a Draft Decree which proposes to amend the Energy Efficiency Labelling of Electrical Equipment and Appliances, Decree 116/2011.

The notified Draft Decree concerns requirements for the import and marketing of equipment, appliances and vehicles that use energy to operate and are included in the regulations of the domestic energy efficiency labelling system.

The URSEA will define the specific procedures for the controls and inspection of the equipment included in the national system of energy efficiency labelling. Also they will establish deadlines for mandatory conformity assessment established for each equipment.

 

 

其他 / 多主題產品 Others / Products with Multiple Subjects

South Korea 韓國

2022年7月19日，韓國無線電研究機構 (RRA) 批准了對《電磁相容性標準通知》的修訂。

主要更新內容如下：

– 手部消毒機等電動噴霧器不做為RRA認證對象

– 跟電梯，Power Supply有關的產品中，“升壓電纜”，1 to 1 cable, 1 to 1 cable accessories不用申請RRA認證

– Country of Origin有多個的情況下，證書只能標注最終製造產品的國家

– 如果證書上的型號名稱，銷售並推銷時的型號名稱相同的話，產品本體可以僅僅標注KC Logo和型號名稱。但是型號名稱必須要放在KC Logo下面。另外，使用手冊必須要標注認證號碼，持證人，製造商，生產國，製造年月等KC認證資訊。

這個法規，從2022年 07月 29日起生效。

https://www.rra.go.kr/ko/notice/noticeList_view.do?nb_seq=5135&nb_type=0  

On 19 July 2022, the South Korean Radio Research Agency (RRA) approved an amendment to the Notice on Criteria for Electromagnetic Compatibility.

– Several products deleted from the mandatory list.

– The certificate can only mention the Country of Origin in which the final product was manufactured.

– Marking rules is revised for manual and label.

The Act will come into force on 29.07.2022.

英國政府於 2022 年 6 月 20 日公布變更部分 UKCA 產品符合性標示規範，以簡化銷售至英格蘭、蘇格蘭及威爾斯之產品認證與符合性宣告要求，主要變更事項如下：

• 2022 年底之前製造並進口到英國且符合 CE評定的庫存品，無需重新進行UKCA測試及認證
• 為了維修、替換或保養並已經在英國市場上的產品或系統而進口的零部件，仍然可採用最初向英國市場進口產品或系統時所適用的法規要求，這將有助於解決對零部件可用性的擔憂，並確保企業和組織免於對營運造成困擾。
• 英國政府立法計畫延長當前UKCA標誌位置，2025 年 12 月 31 日前，英國接受將 UKCA 標誌放於產品標籤或隨貨手冊上。
• 製造商在2022年12月31日前取得歐盟合格評定機構頒發 CE 證書之產品，可以直接作為UKCA標誌的基礎，不需要重新測試及認證，此規定有效期至CE證書到期或2027年12月31日，以兩者較早到期日為主，效期過後若產品希望繼續在英國販售，需依官方程序取得英國合格評定機構的認可報告或證書，才能再宣告符合並放上UKCA標誌。

 

欲查閱英國政府官方資訊, 請點擊以下連結

Government to make it simpler for businesses to apply new product safety markings – GOV.UK (www.gov.uk)

想諮詢德國萊因TÜV提供的UKCA服務: ＞立即了解＜

如何做好進入英國市場的準備，請就近聯繫德國萊因TÜV大中華區的專家，讓我們為您提供完整的英國准入方案！

資訊 / 電信 ITE / Telecom

澳洲

澳洲近日發佈音訊/視頻，資訊和通訊技術設備 安全要求新版標準，AS/NZS 62368.1:2022 (基於IEC 62368-1:2018 版本3.0)。

New version of standard was published recently:

AS/NZS 62368.1:2022 – Audio/video, information and communication technology equipment, Part 1: Safety requirements (IEC 62368-1:2018 (ED. 3.0), MOD)

 

EAEU 歐亞經濟聯盟

2022 年 6 月 14 日，歐亞經濟委員會發佈第 90 號決定，關於修訂關於低壓設備安全 (LVE) 技術法規的第 768 號決定，擴大了技術規則不適用的設備清單。該決定將於 2022 年 12 月 11 日生效。

err_14062022_90_doc.pdf (eaeunion.org)

On 14 June 2022, the Eurasian Economic Commission published a Decision No. 90 on Amendments to Decision No. 768 on Technical Regulations on Safety of Low Voltage Equipment (LVE).

The Decision introduced a new edition of Article 1(2), extending the list of equipment to which the Technical Regulations does not apply, adding:

• second-hand low-voltage equipment;
• low-voltage equipment included in the scope and subject to confirmation of compliance with the requirements of the technical regulations of the Customs Union “On the safety of machinery and equipment” (TR CU 010/2011), “Safety of elevators” (TR CU 011/2011) and “On the safety of equipment for operation in explosive environments” (TR TS 012/2011), except for cables, wires, cords;
• low-voltage equipment manufactured by legal entities and individuals registered as individual entrepreneurs, not intended for circulation in the customs territory of the Union, transfer free of charge, rental, hire or lease;
• defence products to ensure the interests of defence and security, including those supplied under the state defence order;
• low-voltage equipment components (assemblies, components and components) supplied by the manufacturer of this low-voltage equipment on a contractual basis, provided that these components cannot be available to the consumer (user) except as built-in low-voltage equipment for which they are intended;
• components of low-voltage equipment (assemblies, components and components), the safety of which is partially or completely determined by how these components are built into other electrical equipment, and cannot be assessed (tested) otherwise than as part of this equipment (for example, connectors, winding wires, printed circuit boards, microswitches, relays, integrated circuits, discrete semiconductor devices, capacitors, inductors, resistors, filters and other components for mounting on printed circuit boards or otherwise inside housings or protective shells.

The Decision also adds new definitions to Article 2 and establishes marking and operational documentation requirements is also amended in Article 5.

The Decision will enter into force 180 calendar days from the date of official publication, on 11 December 2022.

err_14062022_90_doc.pdf (eaeunion.org)

 

EAEU 歐亞經濟聯盟

2022 年 6 月 14 日，歐亞經濟委員會發佈了第 91 號決定，修訂了《電磁相容性技術法規》，包括並不限於以下變化:

• 增加了本技術法規不適用的技術方式
• 添加新定義
• 操作文件中的字母商標、專有名稱、其他名稱和細節可以用其他語言提供；
• 計量單位可以使用其國際名稱給出；
• 如果訊息量允許，則允許不起草操作文件，但在技術工具本身或其包裝上標明資訊；
• 將系統模組和收銀機添加到需要以認證形式確認符合性的技術清單中；
• 將影印機 (包括多功能設備) 添加到需要以認證形式確認符合性的技術清單

該決定將於正式公佈後 180 天后，即 2022 年 12 月 11 日生效。

err_14062022_91_doc.pdf (eaeunion.org)

On 14 June 2022, the Eurasian Economic Commission published a Decision No. 91 amending Technical Regulations on Electromagnetic Compatibility.

The Decision introduced the following changes:

• New edition of Article 2 adding technical means to which this technical regulation does not apply: specially designed to ensure safety in the field of the use of atomic energy; used technical means (exploited); medical devices; defense products which ensure the interests of defense and security, including those supplied under the state defense order;
• Adding new definitions;
• Letter trademarks, proper names, names of settlements and other names and details in operational documents may be given in other languages;
• Units of measurement may be given using their international designation;
• If the amount of information provided for in paragraph 4 of the Article 5 allows, then it is allowed not to draw up operational documents, but to indicate the information on the technical tool itself or on its packaging;
• Adding system blocks and cash registers, including those operating in conjunction with a computer to the list of technical means subject to confirmation of conformity in the form of certification (Annex 3, Part 3);
• Adding copiers (including multifunction devices) to the list of technical means subject to confirmation of conformity in the form of certification (Annex 3, Part 4).

The Decision will enter into force 180 days after its official publication, on 11 December 2022.

err_14062022_91_doc.pdf (eaeunion.org)

 

Hong Kong 香港

2022 年 4 月，香港通訊事務管理局 (OFCA) 發佈了新的類別牌照、新的技術標準 HKCA1081 並更新了標籤指引 HKCA3211。隨著新法規的通過，通訊辦現在允許 WLAN 設備部分使用 6 GHz 頻譜。

In April 2022, the Office of the Communications Authority (OFCA) in Hong Kong published a new Class Licence, new Technical Standard HKCA1081 and update the labeling guideline HKCA3211.

With the adopted new regulations the OFCA allows now WLAN devices to utilize the 6 GHz spectrum partially:

• “Client devices” are exempted from mandatory type approval processes, while “6 GHz Access Points” are expected to be subject to obligatory conformity assessment and labelling requirements.
• Allowed Frequency band: 5.925 – 6.425 GHz
• The maximum output power shall not exceed the limits indicated below:

Location of Use	Output Power (EIRP)
Indoor	24 dBm
Outdoor	14 dBm

• All radiocommunications apparatus operating in the 6 GHz band shall meet the technical requirements in the ETSI EN 303 687 harmonised standard.
• However, indoor devices are allowed to diverge from the mentioned EU requirements, namely:
• Power Output Limit has been increased to 24 dBm EIRP;
• PSD has been increased from 10 dBm/MHz to 11 dBm/MHz.

 

India 印度

國家通信安全中心機構於 2022 年 6 月 20 日發佈關於 MTCTE體系下電信產品的 ITSAR認證(Indian Telecom Security Assurance Requirements) 的新通知。

National Centre for Communication Security body has issued a new notification on ITSAR requirements for telecom products under MTCTE (Mandatory Testing and certification of Telecommunication Equipment) Scheme on 20/06/2022

The highlights are:

• Start of Voluntary Security Certification of IP Router, Wi-Fi CPE and UICC (SIM) Equipment in Q3/Q4 of Financial Year 2022-23.
• Mandating the security certification as part of MTCTE from 01-Apr-2023.

List of approved product and draft products are below.

https://nccs.gov.in/nccs/itsar.html

 

India 印度

由於測試基礎設施不可用，TEC 已宣佈針對無線電廣播接收器和 PTP PMP 微波固定無線電系統的部分測試進行通用豁免。

Due to unavailability of the testing infrastructure, generic exemption has been announced by TEC for testing against below set of testing parameters for Radio Broadcast Receivers and PTP PMP Microwave Fixed Radio Systems:

Product category	Exempted test parameters	Validity of exmption
Radio Broadcast Receiver (RBR)	· Frequency of operation for Radio broadcast receivers · Radio Conformance for RBR · GPS · NavIC	up to 1st Dec 2022 or till further orders
PTP and PMP Microwave Fixed Radio Systems	· IT Equipment safety for radio Products parameter as per EN/IEC 60215: 2016	up to 22nd Dec 2022 or till further orders

It should be noted that in order to complete the submission of the application for MTCTE certification for the aforementioned product categories, the appropriate notification must be posted against the appropriate parameters in the MTCTE portal.

The notifications can be accessed at:

RBR: https://www.mtcte.tec.gov.in/filedownload?name=downloadDocument_RBR_parameters_exemptions.pdf

PTP and PMP Microwave Fixed Radio Systems: https://www.mtcte.tec.gov.in/filedownload?name=downloadDocument_Gen_Exemp_PTP_PMP06232022.pdf

 

India 印度

為減輕行業和企業的合規負擔，電信設備定期強制性測試和認證 (MTCTE) 證書的有效期已從 5 年延長至 10 年，即日起生效。

The validity of Regular Mandatory Testing and Certification of Telecommunication Equipment (MTCTE) certificate has been enhanced from 5 years to 10 years with immediate effect with a view to reduce the compliance burden on industries and businesses.

 

South Korea 韓國

2022 年 5 月 31 日，韓國無線電研究機構 (RRA) 批准了對《電磁相容性標準通知》的修訂。

該文件在某些電磁相容標準的輻射干擾限值中增加了 3m 容差限值，以便可以選擇性地應用 10m 或 3m 限值。本通知自2023年1月1日起實施。

On 31 May 2022, the South Korean Radio Research Agency (RRA) approved an amendment to the Notice on Criteria for Electromagnetic Compatibility.

The amendment aims to align certain national EMC standards with international standards.

The document adds 3m tolerance limits to radiation disturbance limits of certain electromagnetic compatibility standards so that either 10m or 3m limit can be applied selectively. The improved electromagnetic compatibility standards include:

• EMC standards for household electrical devices and electric devices;
• EMC standards for lighting equipment;
• EMC Standards for wireless equipment;
• EMC standards for multimedia devices, etc.

The document also amends EMC standards for low voltage switchgear and control gear, by expanding frequency range for radiated immunity test for circuit-breakers, relay, contactors and motor-starters, etc.

Lastly, the amendment introduces editorial changes, such as KN test methods referenced in Annexes to KS standards.

This Notice will enter into force on 1 January 2023.

 

Taiwan 台灣

BSMI頒布修正「應施檢驗無線充電器商品之相關檢驗規定」，自 2022年8月1日起，表列商品檢驗方式採型式認可逐批檢驗或驗證登錄（型式試驗模式加符合型 式聲明模式）雙軌並行。

https://www.bsmi.gov.tw/wSite/public/Data/f1653982808016.pdf

​

 

In response to the concerns raised about high non-compliance rate of wireless chargers, which are allowed to complete the conformity assessment procedure (Registration of Product Certification, RPC) before they are placed on the market, the Bureau of Standards, Metrology and Inspection (BSMI) is revising the time of completing the conformity assessment procedure to before the products are imported or transported out of the production premises. The procedure of Type-Approved Batch Inspection (TABI) will also be provided as an alternative to RPC. Business operators may choose the appropriate procedure depending on their needs. A specific Commodity Classification Code (C.C.C. Code) is assigned to wireless chargers for customs clearance for this purpose.

https://www.bsmi.gov.tw/wSite/public/Data/f1653982808016.pdf

 

Taiwan 台灣

[法規草案] BSMI頒布「應施檢驗資訊商品數位攝影機及數位相機之相關檢驗規定修正草案」，草案預定將於2025年1月1日生效。表列商品原檢驗方式採符合性聲明者，自2025年1月1日起原符合性聲明失其效力。

https://www.bsmi.gov.tw/wSite/public/Data/f1653641687763.pdf​

The Bureau of Standards, Metrology and Inspection of the Ministry of Economic Affairs (BSMI) proposes to change the conformity assessment procedure of digital cameras due to the high rate of noncompliant market surveillance results. The new conformity assessment procedure will be Registration of Products Certification (Modules II+III) or Type-approved Batch Inspection (TABI). The amendments will take effect from 1 January 2025. The import regulation code of the commodity is assigned as C02.

https://www.bsmi.gov.tw/wSite/public/Data/f1653617418659.pdf

 

Taiwan 台灣

德國萊因台灣已完成BSMI安規與EMC新標準資質認證，可以開始受理CNS 15598-1與CNS 15936當地測試案件，以及CB IEC 62368-1: 2018轉CNS 15598-1案件。若要使用IEC 62368-1:2014，則需要另外評估或者補差異，才可接受轉CNS 15598-1。

TÜV Rheinland Taiwan has completed to extend scope accreditation of BSMI Safety and EMC.

It is now possible to apply local testing for CNS 15598-1 (or base on standard IEC 62368-1: 2018) and CNS 15936 through TÜV Rheinland Taiwan. However, if the clients use the CB test report with second edition (IEC 62368-1:2014), there is a need to do pre-evaluation or addition difference.

 

Thailand 泰國

​泰國工業標準協會( Thai Industrial Standards Institute, TISI)於2022年6月24日正式宣佈20種音視頻、資訊和通訊技術設備應符合最新標準TIS 62368 Part 1-2563。舊標準的證書將於2022年12月21日自動失效。

新標準強制實施日:

(A) 2022年12月21日：以下管制產品 (1) ~ (19)

(B) 2023年10月17日：以下管制產品 (20)

注意: 所有列出舊標準TIS 1195-2536的證書將會在2022年12月21日自動失效。

特別提醒:  TISI新標準的採用擴大了認證產品的類別–新增管制產品第 (20) 項: Electrical power supplies for mobile phones and tablets (手機/平板充電器)。也就是說，手機充電器，平板充電器，自2023年10月17日起將強制TISI認證。

​TISI had officially announced following mandatory standard notification.

– TIS 62368 Part 1-2563 Audio/video, information and communication technology equipment – part 1: safety requirements

Please find related regulation as follows;

1) Ministerial regulation TIS62368_1_2563: this is announcement of TIS 62368 Part 1-2563 standard as mandatory standard.

Announcement: date 24 June 2022.

Effective date: (21 December 2022) 180 days from announcement date for product item (1) to (19).

Effective date: (17 October 2023) 480 days from announcement date for product item (20).

2) TIS62368_1_2563 Standard: This is industrial product standard TIS 62368 Part 1 – 2563.

Applicable product summary: TIS 62368 Part 1-2563 industrial product standards audio, Video, Information and Communication Technology Equipment, Volume 1, safety requirements.

(1) radio receiver industry products

(2) television receiver industry products

(3) signal amplifier industry products

(4) disc player industrial products

(5) industrial products of video game consoles

(6) industrial products of wireless microphone receivers

(7) radio receiver industry products

(8) television receiver industry products

(9) satellite receiver industry products

(10) loudspeaker industry products with signal amplification

(11) signal converter industry products

(12) signal modifier industry products

(13) audio mixer industry products

(14) electronic musical instrument industry products

(15) industrial products of audio and video players

(16) industrial products, audio and video receivers via the Internet

(17) cable television receiver industry products

(18) industrial products audio and video converter

(19) industrial products, electrical power supplies for electronic appliances used with Industrial products Article 2 (1) – (18)

(20) industrial products, electrical power supplies for mobile phones and tablets

Note: The scope of this mandatory standard do not cover industrial products under Clause 2 (1) to (18) used in public and professional use or which is an electronic appliance that uses a voltage less than 50 V a.c. or 75 V d.c.

As a result of this new standard implementation, all certificates under current standard TIS 1195-2536 will be automatically withdrawn on 21 December 2022.

 

 

電池 Batteries

Australia 澳洲

鈕扣電池和含鈕扣電池產品的四項強制性標準已於 2022 年 6 月 22 日在零售層面生效。

The four mandatory standards for button batteries and products containing button batteries are due to come into effect on 22 June 2022 at retail level.

Under the mandatory safety and information standards, products must have secure battery compartments to prevent children from gaining access to the batteries. Manufacturers must undertake compliance testing, supply batteries in child-resistant packaging, and place additional warnings and emergency advice on packaging and instructions.

The National Retail Association urges businesses who supply button batteries, or products that are powered by them, to review their product lines and ensure compliance with the standards ahead of the 22 June deadline.

 

 

家用電器 House Appliances

Panama 巴拿馬

2022 年 5 月 18 日，巴拿馬貿易和工業部發佈第 49 號決議，廢除了 DGNTI COPANIT 104-2017 技術法規和 DGNTI COPANIT 509-2017 技術標準，並承認經巴拿馬 2022 年第 23 號決議批准的中美洲技術法規 RTCA 23.01.78.20 (關於具有可變製冷劑流量的無管分體式空調)，該新技術法規將於 2022 年 12 月 17 日生效。

該決議確認巴拿馬標準和工業技術總指導 (DGNTI) 在 2022 年 3 月 1 日之前根據技術法規 DGNTI COPANIT 104:2017 頒發的證書將在其到期日之前有效。

該決議規定，2022 年 3 月 1 日之後頒發的證書自頒發之日起有效期為 1 年。有效期為 2022 年 12 月 17 日的證書將自簽發之日起延期 1 年。

該決議確認在 2024 年 12 月 31 日之前，根據技術法規 DGNTI COPANIT 104:2017 對國內市場現有庫存的標籤將被接受。

該決議於 2022 年 5 月 18 日生效。

On 18 May 2022, the Panamanian Ministry of Trade and Industry published Resolution No. 49 setting out the transitional periods that will apply as Panama transitions from Technical Regulation DGNTI COPANIT 104-2017 and Technical Standard DGNTI COPANIT 509-2017 to the application of Central American Technical Regulation RTCA 23.01.78.20 on Ductless Split Type Air Conditioners with Variable Refrigerant Flow.

This Resolution repeals Technical Regulation DGNTI COPANIT 104-2017 and Technical Standard DGNTI COPANIT 509-2017 and recognises the ratification of Central American Technical Regulation RTCA 23.01.78.20 as approved by Panama Resolution No. 23, 2022 (published in the Official Gazette 29473 dated 9 February 2022) which will come into force on 17 December 2022.

It confirms that certificates issued by the Panama General Direction of Standards and Industrial Technology (DGNTI) prior to 1 March 2022 in accordance with Technical Regulation DGNTI COPANIT 104:2017 will be valid until their expiry date.

It provides that certificates issued after 1 March 2022 will be valid for 1 year from their date of issue.

Certificates issued with an expiry date of 17 December 2022 will be extended for a period of 1 year from their date of issue.

Finally, it confirms that the labelling of existing stock in the national market in accordance the Technical Regulation DGNTI COPANIT 104:2017 will be accepted until 31 December 2024.

This Resolution entered into force on 18 May 2022.

 

Phillippines 菲律賓

6月1號,菲律賓DTI發佈了補充指引DAO 22-01。

以冰箱為例 (產品安全更新了範圍，能效/性能更新與PELP計畫一致)，容積超過567L (到600L) 冰箱應該在2023年9月5號前申請強制性安全認證；當地庫存能效產品應在2023年9月5號到2024年3月5號之間向BPS申請認證。

2024年3月5號開始進行市場監督，只有帶有PS標識、IC貼紙及BPS認證標識的能效產品才能在市場上進行流通/銷售。

On June 1, the DTI of the Philippines issued supplementary guidance DAO 22-01.

Take refrigerators as an example (the scope of product safety has been updated, and the energy efficiency/performance updates are consistent with the PELP plan), refrigerators with a volume exceeding 567L (to 600L) should apply for mandatory safety certification before September 5, 2023; locally stocked energy efficiency products should apply to BPS for certification between September 5, 2023 and March 5, 2024.

Market supervision will begin on March 5, 2024. Only energy-efficient products with PS logo, IC sticker and BPS certification logo can be circulated/sold in the market.

 

South Korea 韓國

2022 年 6 月 10 日，韓國技術與標準局 (KATS) 宣佈修訂 3 KC 電器安全標準:

• KC 60335-1 家用和類似用途電器-安全第1部分：一般要求；
• KC 60335-2-40 家用和類似用途電器-安全第2-40部分：電動熱泵、空調和除濕機的特殊要求；
• KC 60335-2-65 家用和類似用途電器 – 安全第 2-65 部分：空氣淨化器具的特殊要求。

這些標準主要將針對UV-C輻射的非金屬材料和內部佈線的耐候性測試專案從強制性規定改為參考。 該通知自2022年6月10日起生效。

On 10 June 2022, the South Korean Agency for Technology and Standards (KATS) announced the revision of 3 KC safety standards for electrical appliances in order to mitigate the burden on electronic manufacturers.

The revised safety standards are as follows:

KC 60335-1 Household and similar electrical appliances – Safety Part 1: General requirements;

KC 60335-2-40 Household and similar electrical appliances – Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers;

KC 60335-2-65 Household and similar electrical appliances – Safety Part 2-65: Particular requirements for air-cleaning appliances.

These standards primarily change the weather resistance test items for non-metallic materials and internal wiring against UV-C radiation, from mandatory regulations to references.

The Notice enters into force on 10 June 2022.

 

 

能源效率要求 Energy Efficiency Requirements

Brazil 巴西

2022 年 6 月 3 日，巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈第 230號協議，以修訂2021第 269號協議，關於空調合格評定和能源標籤的技術要求。

第 230號協定部分空調期限推遲了12個月，該協議已於 2022 年 7 月 1 日生效。

On 03 June 2022, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 230 to amend Portaria No. 269, 2021 on Technical Requirements for Conformity Assessment and Energy Labelling of Air Conditioners.

This Portaria adds Article 13-A to Portaria No. 269/2021 in order to determine that for cassette-type conditioners of any cooling capacity and other devices with a capacity equal to or greater than 36 thousand Btu/h, the deadlines mentioned in Article 12 and its sole paragraph, as well as in Article 13, are postponed by 12 months, as follows:

Article 12: extension of compliance deadline to 31 December 2023;

Article 12 single paragraph: extension of compliance deadline to 30 June 2024;

Article 13: extension of compliance deadline to 30 June 2025.

The dates are adjusted owing to the impossibility of determining the energy consumption and the Seasonal Performance Index (IDRS) of cassette devices and split-types above 36 thousand Btu/h per ISO 16358-1:2013 due to the absence of a third-party accredited laboratory.

This Portaria will come into force on 1 July 2022.

 

Central America 中美洲

中美洲技術法規 RTCA 23.01.80:21 規定了某些無管分體式空調設備的能效要求，範圍包括壓縮機系統配備空氣冷凝機且製冷量不超過 19050 Wt (65 000 BTU)的空調。

該決議將於 2022 年 8 月 17 日對薩爾瓦多、宏都拉斯和尼加拉瓜生效，於 2022 年 12 月 17 日對巴拿馬、哥斯大黎加和瓜地馬拉生效。

This Central American Technical Regulation RTCA 23.01.80: 21 establishes energy efficiency requirements for certain ductless split-type air conditioning equipment.

This Regulation establishes the minimum energy efficiency ratio (SEER) level, test method, conformity assessment procedure and labelling requirements for ductless split type air conditioners with variable refrigerant flow which are imported or marketed in Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica and Panama. The type of air conditioners in scope are those using electrical air-cooled condensers with a nominal cooling capacity of up to 19050 Wt (65 000 BTU) and operating by mechanical compression.

The Technical Regulation recognizes the validity of the following test methods for determining the performance of air conditioners:

• ANSI/ASHARE 37-2009 Methods of testing for rating Unitary air conditioning and heat pump equipment. The American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. 2.
• ARI 210/240- (2017) Performance Rating of Unitary Air-conditioning & Air-source Heat Pump Equipment;
• NOM-026-ENER-2015 Energy efficiency in split type air conditioners (Inverter) with variable refrigerant flow, free discharge and ductless air conditioners (Mexican Standard).

In relation to labelling, all equipment shall bear the energy efficiency label set out in Annex B. The energy label shall:

• be attached to the device or affixed by means of a sticker;
• be affixed in a visible manner on the surface of the product;
• contain, in legible and indelible form, in “Arial” font, the minimum information listed in section 11.3 of this Regulation;
• comply with the dimension requirements as specified under section 11.4.

This Resolution will enter into force on 17 August 2022 for El Salvador, Honduras e Nicaragua and on 17 December 2022 for Panama, Costa Rica and Guatemala.

 

Chile 智利

2021 年 5 月 28 日，智利電力和燃料監管局 (SEC) 發佈了第 34635 號決議，批准適用於微波爐的能源效率測試協議 PE No. 1/18/2:2021。 本議定書規定了家用微波爐能效認證的測試程序，包括帶有電子控制式和機械控制式的微波爐。家用微波爐的製造商、進口商和貿易商必須根據該協定對其產品進行認證，並確保從 2022 年 1 月 31 日起，持有由認證機構頒發的能效批准證書及產品貼上能效標籤才能進入市場銷售。

On 28 May 2021, the Chilean Superintendence of Electricity and Fuels (SEC) published Resolution No. 34635 to approve Energy Efficiency Testing Protocol PE No. 1/18/2:2021 for microwave ovens.

This Protocol establishes the procedure for the performance of tests for the certification of energy efficiency of microwave cooking ovens for domestic use. This includes ovens with digital control and mechanical control. Microwave ovens which cannot accept loads with diameters ≥ 200 mm or with a height ≥ 120 mm. a height ≥ 120 mm are excluded from the scope of this Protocol.

Microwave ovens must be certified in accordance with this protocol to be placed on the market and have an Energy Efficiency Approval Certificate issued by a certification body and an energy efficiency label placed on the product.

This testing protocol is based on:

1. Standards IEC 60705:2014 Microwave ovens for domestic use – Methods for performance measurement
2. IEC 62301:2011 Electrical appliances for domestic use – Standby power measurement, and
3. Resolution No. 20, 2021 on technical specifications for the design of the energy efficiency label.

This Resolution determines the date of application for this Protocol PE No. 1/18/2:21 is 31 January 2022.

Manufacturers, importers and traders of household microwave ovens must have their products certified in accordance with this protocol and ensure that they all carry the energy efficiency label from 31 January 2022.

 

Japan 日本

2022 年 5 月 31 日，日本經濟產業省 (METI) 發佈了對《空調能耗性能評估標準通知》（1999 年第 190 號）的修訂。自2027年4月1日起適用於製冷量為4.0kW及以下的直吹式壁掛式家用空調。 自 2029 年 4 月 1 日起，其他家用空調以及將兩台或多台室內機連接到一台室外機並單獨控制室內機運行的所有多連線家用空調也適用。

On 31 May 2022, the Japanese Ministry of Economy, Trade and Industry (METI) issued an amendment to Notice of Evaluation Criteria for Energy Consumption Performance of Air Conditioners (No.190, 1999). The amendment aims to add new numerical standards for household air conditioners.

The amendment deletes Table 1 and makes changes to the numerical order of the tables. It further adds Table 4 which provides the required energy performance for household air conditioners.

This standard shall apply from 1 April 2027 to household air conditioners that are direct-blown and wall-mounted and have a cooling capacity of 4.0 kW or less.

It also shall apply from 1 April 2029 to the other household air conditioners, and all multi-type household air conditioners that connects two or more indoor units to one outdoor unit and controls the operation of the indoor units individually.

Section 1-2 provides the exceptions to the criteria, that even if the standard energy consumption efficiency of air conditioner has not been achieved, it is considered to have been achieved if certain standards are met.

 

India 印度

BEE公布現行自願制度下的吊扇能耗標準有效期至2022年6月30日。 在強制性制度下，標籤有效期為2022年7月1日至2024年12月31日。

BEE decided the existing energy consumption standards of Ceiling Fan under voluntary regime is valid till 30 June,2022.  Under the mandatory regime,the label validity period will be from 1 July,2022 to 31 December,2024.

It covers every electric ceiling type fan operated by induction motors and Brushless Electric Motors of all the standard sweep sizes that work on single phase alternating current supply up to and including 250V, 50Hz.  For the purpose of determining the star level, the ceiling-type fans shall be tested as per the standards IS 374:2019 with all amendments.

 

India 印度

BEE 將推新logo納入標準和標籤 (S&L) 計劃。BEE 自願標籤計劃下的器具/設備樣本標籤中的 BEE 新標識已被納入; 但強制性器具中的標識將分別在修訂通知發佈時納入。

BEE is in process of incorporating its new logo in the sample label of all the appliances covered under Standards & labelling (S&L) program. The new logo of BEE in the sample label of appliances/equipment under BEE’s Voluntary labelling program have been incorporated. However, the logo in mandatory appliances will be incorporated as and when the amendment notification is published respectively.

For enabling the same, the editable files of revised sample labels for respective appliances are available on BEE star label portal for reference:

https://beestarlabel.com/Home/EquipmentSchemes?type=V

 

 

其他 / 多主題產品 Others / Products with Multiple Subjects

Singapore 新加坡

新加坡 CPSO (消費品安全辦公室) 將更新中度風險受控商品所需的安全標準。

新要求的生效日期如下：

• 從 2024 年 6 月 1 日起 – 用於受控商品的新註冊
• 從 2025 年 6 月 1 日起 – 續展註冊

值得注意的是，從2024.6.1起，不再接受安全標準IEC62368-1:2014，而只接受IEC60950-1:2005+A1+A2 /IEC60065:2014和IEC62368-1:2018。

Singapore CPSO (Consumer Product Safety Office) wishes to state that, for the purpose of testing and certification for registration under the Consumer Protection (Safety Requirements) Regulations (CPSR), the required safety standards for medium risk Controlled Goods will be updated.

The new requirements will have the following effective dates:

• From 1st June 2024 – for new registrations of Controlled Goods
• From 1st June 2025 – for renewal of registration

It is worthwhile to pay attention that from 2024.6.1, safety standard IEC62368-1:2014 will no longer be accepted, while only IEC60950-1:2005+A1+A2 /IEC60065:2014 and IEC62368-1:2018 are accepted.

 

South Korea 韓國

2022 年 5 月 31 日，韓國技術與標準局 (KATS) 批准《關於需要安全確認的家居用品安全標準的通知》的修正案。 此次修訂主要改變對電動自行車的安全要求。根據文件，電動自行車所需電機額定輸出功率由“350W以下”改為“500W以下”。 本通知自2022年12月1日起施行。

On 31 May 2022, the South Korean Agency for Technology and Standards (KATS) approved an amendment to the Notice on Safety Standards for Household Items Subject to Safety Confirmation. The amendment primarily changes safety requirements for e-bikes. According to the document, the required motor rated output of electric bicycles has been changed from “350W or less” to “500W or less”.

This Notice will enter into force on 1 December 2022.

 

Thailand 泰國

2022 年 5 月 23 日，泰國標籤委員會為了保護消費者，讓其獲得有關產品的準確和完整的資訊，根據《標籤管制商品標籤特性通知》 (B.E. 2541, 1998) 發佈了關於標籤管制產品類別的公告. 類別包含以下產品:

• 家庭用品
• 個人產品
• 紙製品和文具
• 電器及部件 (電熱水壺、咖啡機、攪拌機、食品攪拌機、圖像螢幕、電腦設備、收音機、音響設備、麥克風、揚聲器、燈具 (不包括醫用燈)、冰櫃 (不包括醫用冰櫃)、電爐、微波爐、電熨斗、LED燈)
• 車輛和設備
• 農業設備
• 建築材料
• 其他 (例如縫紉機、手機、手錶、手錶電池、計算器或相機)。

本公告自發佈之日起90天，即2022年8月21日起實施。

On 23 May 2022, the Thai Chairman of the Board on Labelling issued an Announcement on Category of Labelling Controlled Products, in accordance with the Notice on Characteristics of the Label on Label-Controlled Goods (B.E. 2541, 1998).

In order to protect consumers by allowing them to obtain accurate and complete information about the product, some goods are assigned as label-controlled goods in Thailand.

This Announcement include following categories:

• Household products
• Personal products
• Paper products and stationary
• Electrical appliances and components (electric kettle, coffee machine, blender, food mixer, image screen, computer equipment, radio receivers, audio equipment, microphones, speakers, lamps (not including medical lamps), freezers (excluding medical freezers), electric stove, microwave ovens, electric iron, LED lamps)
• Vehicles and equipment
• Agricultural equipment
• Construction materials
• Other (e.g. sewing machines, mobile phones, watches, batteries used for watches, calculators or cameras).

This Announcement will come into force on 21 August 2022, 90 days after its publication.

 

Uzbekistan 烏茲別克斯坦

烏茲別克斯坦發佈《家用電器強制性數位識別碼制度介紹》

2022年4 月2日，烏茲別克斯坦共和國內閣公佈了關於引入家用電器強制性數位標記系統以防止家用電器非法進口、生產和銷告的第 148 號決議以確保家用電器的合法流通。識別條碼需要放罝在產品上，並將用於跟蹤目的。

家用電器和電子產品的標籤分階段進行：

a) 第一組: 吸塵器，洗衣機，冰箱和冰櫃，電視和顯示器 – 從2022年4月15日開始強制標記;

b) 第二組: 家用燃氣灶，抽油煙機，烤箱和爐灶，微波爐，熨斗，熱水器 – 從2022年8月1日開始強制標籤;

c) 第三組: 熱水器，空調，內置電動機的電器 (榨汁機，攪拌機，咖啡研磨機，絞肉機)，所有類型的燈具 – 從2022年11月1日開始強制貼標。

製造商和進口商有權向運營商訂購標記代碼，並使用數位識別工具生產這些產品用於其包裝。

In order to radically improve the mechanisms of accounting for the production, import and turnover of home appliances, to prevent illegal import, production and sale of home appliances, as well as to ensure the legal circulation of home appliances, the Cabinet of Ministers of Uzbekistan published Resolution of the Cabinet of Ministers “On the introduction of a system of mandatory digital marking of certain types of products” dated November 20, 2020 No 737 National information system for marking and tracking of products “Original mark” ”MAT) and designation of“ CRPT TURON ”LLC as the operator of this system.

Development of mechanisms for digital marking of household appliances in accordance with the Resolution of the Cabinet of Ministers No. 322 of May 20, 2021 “On measures to implement pilot projects to expand the list of products subject to mandatory digital marking” for information on the implementation of the pilot project.

To approve the proposal of the State Tax Committee and the Ministry of Finance of the Republic of Uzbekistan on the gradual introduction of a system of mandatory digital marking by means of identification, taking into account the division of household appliances into groups.

a) the first group – vacuum cleaner, washing machine, refrigerator and freezer, TV and monitor – from April 15, 2022;

b) the second group – household gas stove, kitchen hood, oven and stove, microwave, iron, water heater – from August 1, 2022;

c) the third group – water heaters, air conditioners, built-in electric home appliances (juicer, blender, mixer, coffee grinder, meat grinder), all types of lamps – from November 1, 2022.

資訊 / 電信 ITE / Telecom

Australia 澳洲

澳洲通訊和媒體管理局 (ACMA) 發佈新的 LIPD 分類許可證彙編，其中包括 Wifi 6E (5925–6425 MHz)。

新的類別許可證已經生效，現在可以根據針對 AS/NZS 4268 的測試報告為 Wifi 6E 設備頒發 SDoC。現階段紐西蘭尚未批准使用 Wifi 6E。

The Australian Communications and Media Authority (ACMA) has issued a new compilation of their LIPD Class Licence that includes Wifi 6E (5925–6425 MHz).

The new Class License is already inforce, and we can now issue SDoC’s for Wifi 6E equipment based on test reports against AS/NZS 4268. Please note at this stage New Zealand has not approved the use of Wifi 6E.

Following are the technical requirements:

 

Australia 澳洲

澳洲通訊聯盟發佈了 AS/CA S042 標準系列的新部分:

• AS/CA S042-1: 更新緊急呼叫服務 (ECS) 要求以支持 5G 客戶設備 (CE)
• AS/CA S042-5: 設定5G設備要求

雖然尚未確定執行日期，但建議任何 5G 產品都根據 S042-5 和 S042-4 的要求進行評估，以便在 ACMA 發佈更新的標籤通知時，可以立即更新 SDoC。

The Communications Alliance in Australia published new parts to the AS/CA S042 standard series:

• AS/CA S042-1  Which updates the Emergency Call Service (ECS) requirements to support 5G Customer Equipment (CE).
• AS/CA S042-5: To set the requirements for 5G equipment.

Although the enforcement date is not confirmed yet, it is suggested that any 5G product is assessed against the requirements of S042-5 as well as S042-4 so that when the ACMA publishes the updated labelling notice the SDoC can be updated without delay.

 

Brazil 巴西

2022 年 4 月 29 日，巴西國家電信局 (ANATEL) 發佈了第 5159 號法案，批准手機充電器合格評定的技術要求和測試程序。 最具影響力的變化是根據ABNT NBR NM 60884-1和ABNT NBR 14136標準，手機充電器必須進行機械測試。該法案規定在 Anatel 之前對手機中使用的充電器進行合格評定和認證的最低要求。該法案將於 2022 年 10 月 26 日生效。

On 29 April 2022, the Brazil National Telecommunications Agency (ANATEL) published Act No. 5159 to approve Technical Requirements and Test Procedures for Conformity Assessment of Mobile Phone Chargers.

This Act establishes the minimum requirements for conformity assessment and homologation of chargers used in mobile phones before Anatel.

The requirements set forth in this Act are applicable to the following chargers for mobile phones:

– portable chargers whose power source is the electric power network with alternating current (AC)

– portable chargers powered from a direct current source

– specific-purpose USB interfaces (ports) for electric power supply of electronic devices, without data transmission functionality, regardless of the type of power supply source

– inductive chargers, regardless of the type of electric power supply

The USB interfaces that integrate the electric/electronic design of equipment are not covered by these requirements.

The Act will come into force on 26.10.2022

 

EAEU 歐亞經濟聯盟

[法規草案] 2022 年 4 月 26 日，歐亞經濟委員會發佈了關於修訂關於低壓設備安全技術法規 (LVE) 的第 768 號決定的決定草案。 決定草案提出了擴大技術法規不適用的設備清單。

如果頒佈，修訂決定將在正式發佈之日起 180 個日曆日內生效。

On 26 April 2022, the Eurasian Economic Commission issued a Draft Decision on Amendments to Decision No. 768 on Technical Regulations on Safety of Low Voltage Equipment (LVE).

The Draft Decision proposes a new edition of Article 1(2), extending the list of equipment to which the Technical Regulations does not apply, adding:

• second-hand low-voltage equipment;
• low-voltage equipment included in the scope and subject to confirmation of compliance with the requirements of the technical regulations of the Customs Union “On the safety of machinery and equipment” (TR CU 010/2011), “Safety of elevators” (TR CU 011/2011) and “On the safety of equipment for operation in explosive environments” (TR TS 012/2011), except for cables, wires, cords;
• low-voltage equipment manufactured by legal entities and individuals registered as individual entrepreneurs, not intended for circulation in the customs territory of the Union, transfer free of charge, rental, hire or lease;
• defence products to ensure the interests of defence and security, including those supplied under the state defence order;
• low-voltage equipment components (assemblies, components and components) supplied by the manufacturer of this low-voltage equipment on a contractual basis, provided that these components cannot be available to the consumer (user) except as built-in low-voltage equipment for which they are intended;
• components of low-voltage equipment (assemblies, components and components), the safety of which is partially or completely determined by how these components are built into other electrical equipment, and cannot be assessed (tested) otherwise than as part of this equipment (for example, connectors, winding wires, printed circuit boards, microswitches, relays, integrated circuits, discrete semiconductor devices, capacitors, inductors, resistors, filters and other components for mounting on printed circuit boards or otherwise inside housings or protective shells.

If enacted, the amending Decision will enter into force180 calendar days from the date of official publication.

 

印度 India

DoT 與 MeitY 協商決定將以下所列產品豁免 MTCTE (TEC) 計畫的範圍：

1. 移動使用者設備/手機 (Mobile phone)
2. 伺服器
3. 智能手錶
4. 智能相機
5. PoS 機器 (銷售點設備)

請注意，這些產品已包含在 BIS-CRS 計畫中。

In line with the vision of Hon’ble Prime Minister to have a clear and simplified regulatory regime and promote Ease of Doing Business, DoT in consultation with MeitY has decided to exempt the below listed products from the ambit of MTCTE scheme:

1. Mobile User Equipment / Mobile handset (Mobile phone)
2. Server
3. Smart watch
4. Smart camera
5. PoS Machine (Point of Sale Devices)

Kindly be noted that these products are already covered under BIS-CRS scheme.

 

印度 India

考慮到測試基礎設施不可用以及該行業在使其產品符合某些測試參數方面面臨的挑戰，TEC 發佈了一項通用豁免, 豁免有效期至 2022 年 11 月 5 日，或直至進一步的通知。

Considering the unavailable testing infrastructure and challenges the industry is facing in getting their product complied with some of the testing parameters, TEC has issued a generic exemption from getting the products tested against:

1. Tunneling (as per RFC 4213)- Exempted from all the ERs
2. Radio Conformance Requirement- Exempted from Non-Cellular Radio Equipment i.e. MRTS, and PTM PMP Microwave fixed radio systems
3. Technical and protocol requirements- Exempted from MPLS TP CEN Switch and Private Automatic Branch Exchange

The exemption will be valid till November 5th, 2022, or till further orders, whichever will be earlier.

 

印度 India

TEC 發佈了關於汽車行業無線電廣播接收器和跟蹤設備的通知，前裝或作為維修配件單獨出口的車用Radio broadcast receiver以及Tracking devices等產品豁免TEC。

TEC has issued a notification which is with respect to Radio broadcast receiver and Tracking devices in automotive industry.

RBR and tracking device which are integral part of completely build units i.e complete vehicles whether comes fitted with imported vehicles or imported / sourced locally for fitment in locally manufactured vehicles, shall not be covered under MTCTE. Genuine service parts sourced locally or imported as replacement are also not part of MTCTE.

RBR and tracking devices which will be sold separate and standalone unit ( neither integral part of the vehicle nor as genuine service part for replacement) will be covered under MTCTE program.

 

印度 India

WPC於2022 年 5 月 9 日發佈LPD產品的新公報 G.S.R. 347(E)。自本官方公報發佈之日起生效。

New Gazette G.S.R. 347(E) has been released by WPC dated 9th May 2022.

This Gazette supersedes the existing GSR 680E dated 12.09.2012 for “Use of low power devices or equipment  for indoor applications  for frequency band 433 to 434 MHz and GSR 698(E) dated 16.09.2015 for “Use of Very Low Power Radio frequency devices or equipment  including  Radio Frequency Identification Devices for frequency band 433 to 434.79MHz.

G.S.R. 347(E)  is for “Use of Low Power Radio Frequency Devices in the frequency band  433.05 to 434.79MHz which will come into effect from the date of publication of this official Gazette.

Highlights:

• Frequency band limit has been reduced by 0.05MHz
• Occupied bandwidth limit not specified
• ERP limit remains the same as 10mW
• Duty cycle limit remains the same as 10%

 

Qatar 卡達

2022 年 4 月 26 日，卡塔爾通訊管理局 (CRA) 宣佈即日起可用6 GHz 頻段的較低部分 (5925-6425 MHz) 即開放給Wi-Fi 6E。

On April 26, 2022, the Communications Regulatory Authority of Qatar (CRA) announced that, with immediate effect, the lower part of the 6 GHz band (5925-6425 MHz) is available.

Following are the technical requirements:

In addition, the CRA will continue supporting the allocation of the entire 6 GHz band (5925-7125 MHz), commercially known as Wi-Fi 6E, for the use of RLAN devices, but the final policy statement will be pending the outcomes of the World Radiocommunication Conference 2023 (WRC-23).

 

Senegal 塞內加爾

塞內加爾 ARTP 發佈了新的短程設備法規。

Senegal ARTP issued a new regulation for Short Range Devices Regulations. The new ARTP SRD Table in force in Senegal opens new bands for applications below:

• Inductive applications like Wireless Chargers
• RTTT (24.05-24.5GHZ and 77-81GHz)
• Non specific applications including radars (57-64GHz)
• radiodetermination, TLPR, TLP
• Non Specific including VWB (6000-8500MHz)

 

South Korea 韓國

[法規草案] 2022 年 4 月 18 日，韓國無線電研究機構 (RRA) 發佈了關於符合性評估的電磁相容性 (EMC) 測試方法通知的修訂草案，反映修訂後的 KS 國家標準與電磁相容性相關的變化。具體而言，草案將用 2022 版 KS 標準取代某些設備 (如電氣設備和測量儀器) 的電磁相容性測試方法，影響之相關產品例如無線充電器，之前測試標準為KN17，計畫納入KS C 9814-1:2022及KS C 9814-2:2022測試標準。

根據該文件，適用於家用電氣和電氣設備的標準如下：

• 防干擾測試方法 – KS C 9814-1:2022
• 抗擾度測試方法 – KS C 9814-2:2022。

On 18 April 2022, the South Korean Radio Research Agency (RRA) issued a draft amendment to the Notice on Electromagnetic Compatibility (EMC) Test Methods for Conformity Assessment.

The draft was issued to reflect changes in the revised KS national standards related to electromagnetic compatibility. Specifically, the draft would replace the electromagnetic compatibility test methods for certain devices, such as electrical equipment and measuring instruments, including wireless chargers which previous test standard is KN17, plans to be included in the KS C 9814-1:2022 and KS C 9814-2:2022 test standards.

Per the document, the standards applied to household electrical and electric equipment are as follows:

• interference prevention test method- KS C 9814-1:2022,
• immunity test method – KS C 9814-2:2022.

 

Vietnam 越南

[法規草案] 2022 年 4 月 21 日，越南資訊和通訊部發佈了批准《無線電通信設備電磁相容性國家技術法規》的通知草案。 該標準與相關產品規範一起規定了 EMC 測試測量、測試方法、限值和性能標準的要求。該草案徵求意見截止日期為 2022 年 6 月 21 日；擬定實施日期為 2023 年 7 月 1 日生效，屆時將廢止第 21/2014/TT-BTTTT 號通知。

Approving National Technical Regulation on Electromagnetic Compatibility for Radio Communication Equipment, Draft Circular, April 2022.

On 21 April 2022, the Vietnamese Ministry of Information and Communications published a Draft Circular that approves the National Technical Regulation on Electromagnetic Compatibility for Radio Communication Equipment.

Together with related product specifications, this Standard specifies the requirements for EMC test measurements, test methods, limits and performance criteria. In the event of a discrepancy (e.g. special conditions, definitions, abbreviations) between this Standard and the provisions of Standard EN 301 489 series, Standard EN 301 489 would be relevant.

EMC test arrangements and individual test results suitable for each type of radio equipment are specified in the relevant sections of the EN 301 489 series of standards.

In the absence of specific conditions for a particular radio service/ equipment, for example in the case of a new radio service, this Standard may be used in conjunction with the information provided by the equipment manufacturer to verify the EMC requirements as outlined in this Regulation.

The deadline for comments on this Draft is 21 June 2022.

This Draft Circular is proposed to enter into force on 1 July 2023 upon which it will repeal Circular No. 21/2014/TT-BTTTT.

 

 

電池 Batteries

China 中國

2021年4月30日，國家標準化管理委員會 (SAC) 和中國國家市場監督管理總局 (SAMR) 聯合批准了《固定電子設備用鋰離子電池和電池組安全技術規範》國家標準。本標準自2022年5月1日起實施。

On 30 April 2021, China’s Standardization Administration (SAC) and the China State Administration for Market Regulation (SAMR) jointly approved a national standard on the safety technical specification for lithium-ion cells and batteries used in stationary electronic equipment.

This standard only considers the most basic safety requirements for lithium-ion batteries and battery packs and does not incorporate performance and functional characteristics. For the purposes of the Standard, hazards caused by lithium-ion batteries and battery packs refers to leaking liquid, fire, explosion, overheating and electric shock. Safety of lithium-ion batteries and battery packs is related to their material selection, design, production process, transportation and use conditions. The use conditions include normal use conditions, foreseeable misuse conditions and foreseeable failure conditions, as well as environmental conditions that affect safety, such as temperature, altitude and other factors.

The Standard applies to lithium-ion batteries and battery packs for stationary electronic equipment. Stationary electronic equipment within the scope of this standard includes, but is not limited to:

• Stationary information technology equipment (IT equipment);
• Stationary audio and video equipment (AV equipment) and similar equipment;
• Stationary communication technology equipment (CT equipment);
• Stationary measurement control and laboratory electronic equipment and similar equipment.

Uninterruptible power supply (UPS), emergency power supply (EPS), and other lithium-ion batteries and battery packs are also applicable to this standard.

This standard will enter into force on 1 May 2022.

 

Taiwan 台灣

BSMI頒布「儲能系統之單電池及電池系統實施自願性產品驗證相關規定」，自2022年5月16日立即生效。

表列產品之電池系統(組)須包含電池管理系統(battery management system, BMS)，產品符合性評鑑程序之模式依據「自願性產品驗證實施辦法」第4條規定實施。

https://www.bsmi.gov.tw/wSite/public/Data/f1653290604080.pdf

​

BSMI released the stipulation of “Requirements of Implementing Voluntary Product Certification for Cells and Battery Systems of Energy Storage System”

For energy storage system of the batteries, cell and battery for small household use, the testing standard is CNS 62619 and CNS 63056.

The conformity assessment procedures – Product testing with Declaration of Conformity / Product testing with factory inspection.

The listed product should include battery management system (BMS).

The regulations shall be taking into effective from 16th, May 2022.

 

 

家用電器 House Appliances

Thailand 泰國

[法規草案] 2022 年 5 月 2 日，泰國工業部發佈了關於微波爐強制性安全要求的部級法規草案。

該草案主要要求所有微波爐，包括組合微波爐，符合工業標準 TIS 60335 第 2(25) 部分 – 2565 家用和類似用途電器 – 安全 – 第 2-25 部分：微波爐的特殊要求，包括組合微波爐。

在 2022 年 6 月 24 日之前，可以通過線上方式提交對該草案的意見。

On 2 May 2022, the Thai Ministry of Industry issued a draft Ministerial Regulation on Mandatory Safety Requirements for Microwave Ovens.

The draft primarily requires that all microwave ovens, including combination microwave ovens, comply with Industrial Standard TIS 60335 Part 2(25) – 2565 Household and Similar Electrical Appliances – Safety – Part 2-25: Particular Requirements for Microwave Ovens, Including Combination Microwave Ovens.

Draft standard TIS 60335 Part 2(25), setting out safety and labelling requirements, as well as test conditions, etc. has also been issued along with this draft Regulation. The draft standard is identical to IEC 60335-2-25:2020.

Opinions on this draft may be submitted via online here until 24 June 2022.

 

 

燈具 / LED Luminaiaries / LED

China 中國

照明電器 (10照明設備) 產品CCC強制性認證依據標準GB/T 17743-2021《電氣照明和類似設備的 無線電騷擾特性的限值和測量方法》(以下簡稱“新版標準”)，已於2021年12月31日發佈，將於2022年07月01日起實施，替代GB/T17743-2017 (以下簡稱“舊版標準”)。

自2022年7月1日起，新申請認證應按照GB/T 17743-2021標準實施認證並出具新版標準認證證書。對於已按舊版標準獲證的產品，舊版標準認證證書持有人應及時提交轉換新版標準認證證書的申請，並於標準實施日期後、第一次跟蹤檢查結束前，依據TC10相關決議完成按新版標準的產品確認和證書換發工作。所有舊版標準認證證書轉換工作最遲應於2023年7月1日前完成。對於2022年7月1日前已經出廠、投放市場並且不再生產的獲證產品，無需進行證書轉換。

The standard GB/T 17743-2021 “Limit and Methods of Measurement of Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment” (hereinafter referred to as “the new version of the standard”) which is applicable to the CCC certification of lighting appliances (10 lighting equipment) was released on December 31, 2021. This standard will come to force from July 1st, 2022, replacing GB/T17743-2017 (hereinafter referred to as the “old version of the standard”).

From July 1, 2022, new applications for certification shall be certified according to the GB/T 17743-2021 standard and issue a new version of the certificate. For products that have been certified according to the old version of the standard, the license holder should submit the application for the conversion of the new version of the standard in time, and complete the certification conversion according to the relevant resolutions of TC10 after the implementation date of the standard and before the end of the first follow-up inspection. All the certificate conversion of the old version of the standard should be completed by July 1, 2023 at the latest. For certified products that have been shipped from the factory, put on the market and are no longer in production before July 1, 2022, no certificate conversion is required.

 

 

能源效率要求 Energy Efficiency Requirements

Brazil 巴西

2022 年 4 月 20 日，巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈第 179 號協議，對關於空調合格評定和能源標籤技術要求的第 269 號 協議進行修訂。該協議於 2022 年 5 月 2 日生效。

On 20 April 2022, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 179 to amend Portaria No. 269 on Technical Requirements for Conformity Assessment and Energy Labelling of Air Conditioners.

This Portaria amends the Conformity Assessment Requirements of Ordinance No. 269 to establish the criteria for the use of the optional test point in the calculation of the Seasonal Cooling Performance Index (IDRS) and for the acceptance of the results of maintenance tests.

This Portaria will enter into force on 02 May 2022.

 

Brazil 巴西

2022 年 5 月 3 日，巴西礦業和能源部發佈了第 1 號決議，批准本決議附件所載形式的空調新目標計畫。該決議於 2022 年 5 月 3 日發佈之日生效。

On 3 May 2022, the Brazilian Ministry of Mines and Energy published Resolution No. 1 approving the new targets program for air conditioners in the form contained in the Annex to this Resolution.

Equipment in scope are those referenced in Ordinance MME/MCT/MDIC No. 02, of 31 July 2018, Annex I, Article 2: monoblock air conditioners, window or wall, single-body or split system hi-wall type, floor-ceiling and cassette, from a single evaporating unit to a single condensing unit, of national manufacture or imported, for commercialisation and use in Brazil.

The equipment indicated above is intended for operation in alternating current of 60 Hz and rated voltages of 127V, 220V, 380V and 440V, or voltage ranges that encompass the rated voltages mentioned, in single-phase and three-phase systems.

Air Conditioners with water-cooled condensers are excluded from scope. Air conditioners that include, in addition to cooling, the capacity for heating the environment, are within scope.

The Energy Efficiency Index to be used is the Seasonal Cooling Performance Index (IDRS), which must be calculated considering the Technical Standard ISO 16358-1.

The Resolution entered into force on the date of its publication, 3 May 2022.

 

韓國

2022 年 4 月 27 日，韓國貿易、工業和能源部 (MOTIE) 發佈了《能源效率管理設備條例》修正案，修訂增加了部分效率管理設備的能效標準，並為這些產品設定了中長期目標消耗效率。

修正案包含的主要產品包括：

• 泡菜冰箱
• 洗衣機
• 空調

此外，該檔將顯示器指定為效率管理物件，並為這些產品增加了標籤/消費效率要求以及測試方法等。

本通知自 2022 年 4 月 27 日起實施。但洗衣機和電熱製冷設備的效率標準變更將於 2022 年 11 月 1 日起實施，泡菜冰箱和顯示器的要求將於 2023 年 5 月 1 日起實施。

On 27 April 2022, the South Korean Ministry of Trade, Industry and Energy (MOTIE) issued an amendment to the Regulation on Energy Efficiency Management Equipment.

The amendment increased the energy efficiency standards of certain equipment subject to efficiency management and established mid-long term target consumption efficiency for those products.

The key changes of the amendment include:

• Kimchi refrigerators:
• increase in efficiency grade and MEPS;
• addition of energy efficiency target for years of 2026 and 2029 by products type;
• Washing machines:
• improvement of efficiency grade and MEPS;
• addition of energy efficiency target for years of 2025 and 2028 by general washing machines and drum washing machines;
• changes items to be indicated on the energy grade label from “power consumption per kg” to “power consumption for one washing”, and from “water consumption per 1 kg of washing” to “water consumption per washing”;
• Electric air conditioners:
• increase in efficiency grade and MEPS;
• addition of energy efficiency target for years of 2025 and 2028 by products type;
• separate indication of cooling and heating efficiency on energy grade label etc.

The amendment relaxes existing labelling requirements to allow certain items such as electric refrigerators and kimchi refrigerators to bear the efficiency rating label on the side of the product (and not on the front of the apparatus as previously required).

Additionally, the document designates monitors as Subject to Efficiency Management and adds labelling/consumption efficiency requirements as well as testing methods, etc. for those products. Applicable products are monitors with a diagonal screen length of 153 cm or less for the visible screen and are provided in Annex 1.

This Notice entered into force on 27 April 2022. However, changed efficiency standards for washing machines and electric heating and cooling equipment will come into effect on 1 November 2022, and requirements for kimchi refrigerators and monitors will become effective on 1 May 2023.

 

Switzerland 瑞士

[法規草稿] 2022 年 4 月 22 日，瑞士聯邦能源辦公室 (SFOE) 向 WTO 通報了能源效率條例草案。

通知的條例草案將制定更嚴格的 (1-6) 或新穎的 (7-8) 最低能源績效標準 (MEPS)。

所涉及到的產品:

1.家用冰箱

2.家用滾筒式乾衣機

3.家用洗碗機

4.專業冷藏櫃

5.電熱水器

6.集中式和分散式電加熱器

7.專業洗碗機

8.專業炊具

不符合這些要求的產品將不允許投放瑞士市場。 一年的過渡期將允許銷售在生效日期之前投放市場的不合規電器。

徵求意見的最後日期是 2022 年 6 月 21 日，即通知後 60 天。

建議通過日期：2022 年 10 月 3 日。

建議生效日期：2023 年 1 月 1 日。

On April 22, 2022, Swiss Federal Office of Energy (SFOE) notified to WTO a draft Energy Efficiency Ordinance.

The notified draft ordinance will set out stricter (1-6) or novel (7-8) minimum energy performance standards (MEPS) for
1. household refrigerators;

2. household tumble driers;

3. household dishwashers;

4. professional refrigerated storage cabinets;

5. electric hot water storage heaters;

6. centralized and decentralized electric heaters;

7.professional dishwashers;

8.professional cooking appliances;

Products not meeting these requirements will not be allowed to be placed on the Swiss market. A one-year transition period will allow the selling of non-compliant appliances that have been placed on the market before the date of entry in force.

Final date for comments is June 21, 2022, 60 days from notification.

Proposed date of adoption: October 3, 2022

Proposed date of entry into force: January 1, 2023

 

 

其他 / 多主題產品 Others / Products with Multiple Subjects

Taiwan 台灣

消息整合提醒 – 明年2023.01.01開始，BSMI 家電類產品有下列的要求:

1. 下列7項帶有充電電池的家電為應施檢驗商品，且二次鋰系電池/電池組應符合CNS 15364：2013和CNS 62133-2：2018或CB證書及報告(IEC 62133 series)

• 電風扇
• 真空吸塵器及吸水清潔機
• 電動食品碾磨器
• 電動食品混合器
• 電動榨汁機
• 燙 (整) 髮機
• 電動按摩器具

原應施檢驗商品，內部具有二次鋰系電池/電池組，新申請案或證書３年到期展延時，須提供鋰電池的證書或報告, 核備零部件或新增型號不影響(按照原要求)

2. 增加家電織物蒸汽機(CNS 60335-2-85)為應施檢驗商品。

3. 原列檢商品微波爐新增能效要求, 將CNS 60705與CNS 62301納入檢驗標準，已取得BSMI證書者須更新

4. 原列檢商品空氣清淨機新增能效要求, 將CNS 16098:2019納入檢驗標準, 依該標準試驗之能源效率 (CNS 16098)，已取得BSMI證書者須更新

News collection and reminder – Starting from 2023.01.01, BSMI has the following requirements:

1. Seven household appliances with secondary cells/batteries are required to be inspected, and the secondary cells/batteries are required to provide BSMI certificates (CNS 15364：2013& CNS CNS 62133-2：2018) or CB certificates and reports (IEC 62133 series)

– fans

– vacuum cleaners & water-suction cleaners

– electric food grinders

– electric food mixers

– electric juice extractors/ fruit squeezers

– electric hair setting curlers

– electric massage appliances

For the submitted products that should be inspected and have secondary cells/batteries inside, the new application or applying for renewal (expire after 3 years) must provide the certificate or report of the secondary cells/batteries.

2. Newly added home appliance product Fabric Steamers with CNS 60335-2-85 is a commodity subject to inspection

3. New energy efficiency requirements for microwave ovens (CNS 60705 & CNS 62301) were added to the original inspection products, and those who have obtained BSMI certificates must update

4. Newly added energy efficiency requirements (CNS 16098:2019) for the original commercial air purifiers, those who have obtained the BSMI certificate must update.

資訊 / 電信 ITE / Telecom

Brazil 巴西

2022 年 3 月 31 日，巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈了 第148號協議，批准家用電器合格評定技術要求。已於 2022 年 5 月 2 日獲得認證的家用和類似器具必須在 2027 年 5 月 2 日之前根據附件中規定的適用條件和安排，在產品上採用合規標識印章。本協議於 2022 年 5 月 2 日生效。

On 31 March 2022, the Brazil National Institute of Metrology, Standardisation and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 148 to approve Technical Requirements for Conformity Assessment of Household Electrical Appliances.

This Portaria approves the safety and labelling rules for household and similar appliances, in the form of the Conformity Assessment Requirements and the Specifications for the Conformity Identification Mark, contained in Annexes I and II.

Families of household and similar appliances that are already certified on 2 May 2022 must adopt, by 2 May 2027, the Compliance Identification Seal, affixed on the product, according to the applicable conditions and layout established in Annex II.

Manufacturers and importers of families of household appliances that are already certified must adapt, by 2 May 2025, the certification processes in order to meet, on the packaging, the label conditions and layout established in Annex II.

This Portaria will enter into force on 02 May 2022.

Note: until 31 December 2024, ABNT NBR NM 60335-1:2010 – Safety of Home Appliances and Similar, Part 1: General Requirements – and their respective particular rules; and IEC 60335-1:2006 (Ed. 4.2) – Household and similar electrical appliances – Safety – Part 1: General Requirements, and their respective particular standards, may be followed. After 31 December 2024, only IEC 60335-1:2016 (Ed. 5.2) and its corresponding particular standards, listed in sub-item 3.1, will be accepted.

 

2022 年 1 月 19 日，巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈第9號協議，以批准電源供應器插頭和插座的合格評定要求。

該協議適用於插頭和插座電源供應器，或執行插頭和插座電源供應器功能的任何設備，用於家用和類似用途，電壓高達 250V，電流高達20A，帶或不帶百葉窗，帶或不帶保險絲，專用於交流電。

已獲得認證的插頭和插座電源供應器系列的製造商和進口商應有 36 個月的時間來調整認證流程，以滿足包裝上的適用條件和合格標識印章的要求。

本協議於 2022 年 2 月 1 日生效，並廢除第 324/2007 號、第 82/2008 號和第 251/2009 號協議。

On 19 January 2022, Brazil’s National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 9 to approve the requirements for Conformity Assessment of Adapter Plugs and Sockets.

The Portaria applies to plug and socket adapters, or any equipment that performs the function of a plug and socket adapter including the so-called “Benjamin” or “T”, for household and similar use, for voltages up to 250V and current up to 20A, with or without shutters, with or without fuses, and for exclusive use in alternating current.

Manufacturers and importers of plug and socket adapters families that have already been certified shall have 36 months, counted from the abovementioned date, to adapt the certification processes in order to meet, on the packaging, the applicable conditions and layout of the Conformity Identification Seal.

In addition, the Regulation establishes criteria and conformity assessment procedures for plug and socket adapters, through the certification mechanism, certification steps, identification mark and other details focused on safety, aiming at the prevention of accidents in its use.

This Portaria will come into force on 1 February 2022 and will repeal Portarias No. 324/2007, No. 82/2008 and No. 251/2009.

 

Malaysia 馬來西亞

2022 年 3 月，SIRIM/MCMC 公佈所有IMT-2020 (第五代) – 蜂窩助推器設備和全球移動通信和長期演進系統的新申請和續訂申請程序。

SIRIM and Malaysian Communications and Multimedia Commission (MCMC) has approved and published Technical Codes for IMT-2020 (FIFTH GENERATION) – CELLULAR BOOSTER EQUIPMENT and GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS AND LONG-TERM EVOLUTION – CELLULAR BOOSTER EQUIPMENT last year August.

On March 2022 , SIRIM/MCMC had announce the procedure for the new application and Renewal application for all related product. Below are the information:

New Application

Pursuant to that, all GSM, LTE and 5G CBE that are to be imported, distributed, and/or used in Malaysia shall be certified in accordance with these Technical Codes. Thus, all new applications which fulfill the Technical Code and Certification Requirements for Compliance Approval (Type Approval) on Communication, Multimedia and Hybrid Equipment, eTAC/DOC/01-1.1 (“Certification Requirements”) will be granted full approval and are allowed for a maximum validity period of five (5) years.

Renewal Application

Renewal application for existing approval of GSM, LTE and 5G Booster Equipment are no longer allowed. These existing applications will be expired effective immediately. A new application (Normal Application) is required, and it shall meet the new technical code requirements for Cellular Booster Equipment.

 

Malaysia 馬來西亞

自 2022 年 2 月 1 日起，馬來西亞能源委員會受監管的電氣和天然氣產品實施新的 SIRIM-ST 標籤和二維碼。申請人可以完成現有 SIRIM-ST 標籤的庫存，直到收到帶有 QR 碼的新 SIRIM-ST 標籤。 貼在產品上的沒有二維碼的 SIRIM-ST 標籤仍然有效。

Effective 1 Feb 2022, SIRIM QAS International has implemented new SIRIM-ST labels with QR code for regulated electrical and gas products under the Energy Commission (Suruhanjaya Tenaga or ST) of Malaysia.

SIRIM and ST have introduced this type of label to assist consumer in accessing information of the products through SIRIM Mobile Apps easily and conveniently. It is also one of the methods to confirm authenticity of certification status of the products.

With this implementation, applicants are allowed to finish up stock of existing SIRIM-ST labels until receipt of new SIRIM-ST labels with QR Code. SIRIM-ST labels without QR code which were affixed of the products remain valid.

Note: The new label with QR Code applied to both Consignment and PCS.

 

Mexico 墨西哥

2022 年 6 月 25 日，IFT 將對合格評定程序 (PEC) 進行一些修改。應該注意的是：

1. CoC 可轉讓，這允許當地墨西哥進口商使用來自其他當地公司的 CoC
2. 檢測報告的有效期由60天延長至120天，以防止其在認證過程中失效
3. 測試過程中需要的樣品數量不同

On June 25, 2022, the IFT will make effective some modifications in the Conformity Assessment Procedure (PEC).

Among the changes it should be noted that:

1. The CoC becomes transferable. This allows local Mexican importers to use CoCs from other local companies.
2. The validity period of the test report is extended from 60 days to 120 days, this to prevent its validity from expiring during the homologation process.
3. The number of samples required during the tests changes.

 

Paraguay 巴拉圭

巴拉圭工業和商業部於 2021 年 12 月 29 日批准第 931 號決議，關於進口行動電話和行動電話設備的要求。該決議自 2022 年 4 月 1 日起生效，至 2022 年 9 月 30 日屆滿。

On 29 December 2021 Resolution No. 931 which establishes a compliance regime for certain articles of Resolution No. 410/2017 was approved by the Paraguayan Ministry of Industry and Commerce.

The Resolution:

1. Changes point 5.8 of article 5 of Resolution No. 410/2017 to determine the digital presentation for each application for import license for mobile cellular telephone devices of:

1) Certificate of Approval for Cell Phone Devices granted by CONATEL; or

2) Proof of submission of the approval certificate application to CONATEL.

2. Suspends item 9 of article 5 and item 4 of article 7 of Resolution No. 410/2017 on CONATEL’s proof of the IMEI listing record and prior license for the importation of mobile phone devices and non-integrated mother boards of mobile phones, respectively.

This Resolution will enter into force from 1 April 2022 and expire on 30 September 2022.

 

Thailand 泰國

泰國工業部於 2022 年 4 月 4 日發佈制定關於音訊/視頻、資訊和通訊技術設備的工業標準 TIS 62368/3-2564 – 第 3 部分：在安全方面通過通訊電纜和端口傳輸直流電。

本公告自 2022 年 4 月 4 日起生效，即在政府公報上發佈之日。

Published on 4 April 2022 by the Thai Ministry of Industry, this Announcement establishes Industrial Standard TIS 62368/3-2564 on Audio/Video, Information and Communication Technology Equipment – Part 3: Safety Aspects for DC Power Transfer Through Communication Cables and Ports, in accordance with the Industrial Product Standards Act.

The Standard covers equipment intended to supply and receive operating power through communication cables or ports. It provides safety requirements for circuits designed to transfer DC power from the power sourcing equipment (PSE) to the powered device (PD).

This Announcement is effective from 4 April 2022, the date of publication in the Government Gazette.

 

UAE 阿拉伯聯合大公國

自 2022 年 1 月起，阿拉伯聯合大公國電信和數字政府監管局 (TDRA) 向註冊的電信設備製造商或進口商提供的型式批准制度符合性標誌已更改。

The Type Approval Regime Conformity Mark that is provided by The Telecommunications and Digital Government Regulatory Authority (TDRA) of the United Arab Emirates to a registered manufacturer or importer of telecommunications equipment has been changed from January 2022.

The United Arab Emirates TDRA notifies that information on the label should correspond to the information that is displayed after scanning the relevant QR code. Moreover, the QR code should lead to the actual landing page, where users can receive both information on the product and a copy of its valid certificate.

The Type Approval Regime Conformity Mark must be affixed on the equipment box and under the display platform of telecommunications equipment in retail stores. It should be clear, readable, and non-removable. If the product is to be sold over the internet, the mark should be available on the website as well.

 

Yemen 葉門

葉門 MTIT (電信和資訊技術部) 在過去幾個月暫停頒發證書後終於又開始頒發型式批准。即日起頒發的型式認證有效期為 2 年，當局已撤銷有效期為 3 年的初步決定。

Yemen MTIT (Ministry of Telecom & Information Technology) finally started to issue and release type approvals after suspension of issuance for the last few months.

Here is a summary of the changes:

Type approvals will be issued from now on with a validity of 2 years. (The initial decision from the authority with a validity of 3 years has been revoked.

 

Vietnam 越南

2022年3月消息，越南資訊和通信部 (MIC) 發佈了通知草案2022/TT-BTTTT，後續可能會取代第11/2020/TT-BTTTT號通告和第01/2021/TT-BTTTT號通告。該通告預計於2022年7月1日起施行。

Vietnam MIC has released draft Circular xx/2022/TT-BTTTT to replace the Circular 11/2020/TT-BTTTT and Circular 01/2021/TT-BTTTT stipulating the new list of products under MIC Type Approval and Self-assessment DoC scope which shall take effect from July 01, 2022.

New Changes of the draft Circular xx/2022/TT-BTTTT of Vietnam MIC is as per below :

(1) QCVN 22:2021/BTTTT (for safety of ICT product)

(2) QCVN 65:2021/BTTTT (RF for WLAN 5GHz)

(3) QCVN 123:2020/BTTTT (RF for 40GHz ~ 246GHz SRD)

(4) QCVN 124:2021/BTTTT (RF for 76GHz ~ 77GHz vehicle radar)

(5) QCVN 127:2021/BTTTT (RF for 5G NR SA mobile terminal)

(6) QCVN 129:2021/BTTTT (RF for 5G NR NSA mobile terminal)

A large number of products have been moved from Annex 1 – List of products under TA and DOC list to Annex II – List of products under DoC only including 76~77GHz radar, like RFID 13.56MHz, walkie-talkie, and SHF.

 

 

家用電器 House Appliances

Brazil 巴西

2022 年 3 月 30 日，巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈了第121號協議，批准家用洗衣機的合格評定要求。

本協議於 2022 年 5 月 2 日生效。

On 30 March 2022, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 121 to approve the conformity assessment requirements for household washing machines.

The conformity assessment requirements and the specifications for the Conformity Identification Seal, in the form of the National Energy Conservation Label (ENCE), are established, respectively, in Annexes I and II.

This Regulation applies to household washing machines of the following types:

• automatic household washing machines with a top opening (top load);
• automatic domestic washing machines with front load;
• automatic domestic washing machines and tumble dryers with top load;
• semi-automatic domestic washing machines;
• automatic washer-dryers with front load;

Industrial or commercial washing machines are excluded from this Regulation.

According to Article 12, manufacturers and importers are accorded a period of 12 months from the effective date of this Portaria to adapt to the provisions of Article 7, as well as to the layout of the Compliance Identification Seal, as established in Annex II.

This Portaria will enter into force on 2 May 2022.

 

Thailand 泰國

2022 年 4 月 4 日，泰國工業部制定了工業標準 TIS 60335/2(90)-2564，關於家用和類似用途電 -安全 – 第 2-90 部分：商用微波爐的特殊要求。

該標準基於 IEC 60335-1，對用於商業用途的微波爐提供安全要求，該微波爐具有腔門，單相器具的額定電壓不超過 250 V，其他器具的額定電壓不超過 480 V。

本公告自 2022 年 8 月 2 日起生效，自政府公報上公佈之日起 120 天。

Published on 4 April 2022 by the Thai Ministry of Industry, this Announcement establishes Industrial Standard TIS 60335/2(90)-2564 on Household and Similar Electrical Appliances – Safety – Part 2-90: Particular Requirements for Commercial Microwave, in accordance with the Industrial Product Standards Act.

The Standard, based on IEC 60335-1, provides safety requirements for microwave ovens intended for commercial use that have a cavity door and a rated voltage not exceeding 250 V for single-phase appliances and 480 V for other appliances.

This Announcement is effective from 2 August 2022, 120 days from the date of publication in the Government Gazette.

 

 

燈具 / LED Luminaiaries/LED

South Korea 韓國

2022 年 4 月 8 日，韓國技術與標準局 (KATS) 批准了《電器和消費品安全控制法操作公告》的修正案。燈具的供電軌道系統被添加到受安全保證的電器清單中，補充現有的固定式燈串、可充電可擕式燈、泛光燈和鹵素燈具清單。

該通知自2022年10月1日起生效。

On 8 April 2022, the South Korean Agency for Technology and Standards (KATS) approved an amendment to the Operation Bulletin of Electrical Appliances and Consumer Products Safety Control Act.

Electrical Supply Track Systems for Luminaires are added to the list of electrical appliances subject to safety assurance, and as a result the amendment brought changes to the Annexes as follows:

• Adding the said products to the detailed items of lighting equipment subject to safety assurance in Annex 2 (supplements existing list of chain lighting fixtures, rechargeable portable lights, floodlight luminaires and halogen luminaires);
• Adding the model classification and its detailed criteria of the said products to Annex 10;
• Adding a list of parts subject to safety control of the said products to Annex 20;
• Adding safety standard KC 60570 for the products to Annex 25.

The Notice enters into force on 1 October 2022.

 

 

能源效率要求 Energy Efficiency Requirements

澳洲 Australia

游泳池泵強制能效等級標籤和標準要求將於 2022 年 10 月 起實施。

澳洲能效管理機構GEMS近日公佈：從 2022 年 10 月 1 日起銷售或供應的所有游泳池泵都需要顯示能源等級標籤並符合測試要求。 這將幫助消費者通過減少游泳池用電量和減少溫室氣體排放來節省資金。

游泳池泵的供應商和零售商可以在 2022 年 10 月 1 日之前註冊其產品。在此日期之後未在 GEMS 監管機構註冊的產品可能不再在澳洲境內銷售或供應。 我們將與行業、泵供應商、零售商、泳池建造商和其他專業人士合作，就變化和要求進行溝通。

New mandatory standards and labelling requirements for swimming pool pumps

GEMS recently announced: All swimming pool pumps sold or supplied from 1 October 2022 will need to display an energy rating label and meet testing requirements. This will help consumers to save money by reducing the amount of electricity used by their swimming pools and to reduce greenhouse gas emissions.

Suppliers and retailers of swimming pool pumps may register their products prior to 1 October 2022. Products not registered with the GEMS Regulator after this date may no longer be sold or supplied within Australia. We will be working with the industry, pump suppliers, retailers, pool builders and other professionals to communicate the changes and requirements.

 

EAEU 歐亞經濟聯盟

TR EAEU 048/2019《關於耗能設備能效要求的技術法規》，生效日期將延遲三年至2025年9月1日。

The EEC Council, at the suggestion of the Russian side, decided to postpone the entry into force of the EAEU technical regulation “On requirements for the energy efficiency of energy-consuming devices” to September 1, 2025.

The decision was made as part of the implementation of the list of measures to increase the stability of the economies of the member states of the Eurasian Economic Union, including ensuring macroeconomic stability, approved by Order of the Council of the Commission dated March 17, 2022 No. development and adoption of acts of the second level necessary for the implementation of technical regulations – a list of standards and labels for the energy efficiency of energy-consuming devices.

By the same decision of the EEC Council, the date of entry into force of the decision of the Council of the Commission establishing the forms of labels for energy-consuming devices of various types and the rules for their design was postponed to March 1, 2025. And also the deadline for the entry into force of certain requirements established in Annexes No. 3, 5, 6, 9, 12, 13 and 14 to the technical regulations has been postponed for three years.

 

India 印度

BEE發佈通知, 調整現行房間空調 (定速和變速) 能耗標準的有效期至2022年6月30日。

依據修訂後的能耗標準，自 2022 年 7 月 1 日起適用，有效期至 2024 年 12 月 31 日。

因此，新標籤上顯示的有效期應為 2022 年 7 月 1 日至 2024 年 12 月 31 日。

請注意，所有現有型號僅在 2022 年 6 月 30 日之前有效，有效期屆滿後自動失效。

BEE release the notice regarding the validity of the existing energy consumption standards of Room Air Conditioners (Fixed speed and Variable speed) is valid till 30 June 2022.

In accordance with the provisions of the amendment notification of Room Air Conditioners vide S.O. 4634 (E) dated 10 November 2021, the revised energy consumption standards would be applicable from 1 July 2022 and would be valid till 31 December 2024.

Therefore, the revised validity period to be displayed on the new label shall be from 1 July 2022 to 31 December 2024.

Please note that all the existing models are valid only till 30 June 2022 and will be expired automatically after the expiry of the validity period.

 

India 印度

​BEE 要求 BEE 強制性標準和標籤計畫涵蓋的所有冰箱 (現有無霜冰箱、直冷冰箱類別和即將推出的對開門冰箱類別) 的所有許可證持有者，從2023年1月1日起，在印度生產、進口或銷售的每台冰箱都必須貼上二維碼和BEE星級標籤。

​BEE request all permittees of Refrigerators (existing Frost free refrigerators, Direct Cool refrigerators categories and upcoming side-by-side refrigerator category) covered under BEE’s mandatory Standard & Labelling program are hereby informed that it will be obligatory to affix QR code along with BEE star label on each unit of refrigerator being manufactured, import or sold in India w.e.f. 1st January, 2023.

 

 

其他 / 多主題產品 Others / Products with Multiple Subjects

澳洲 Australia

今年6月將開始執行最新的插頭與插腳標準AS/NZS 3112:2017 +A1:2021。

現時提交的任何證書變更申請或標準升級，都需要同時符合這個最新標準。

The latest plug and pin standard AS/NZS 3112:2017 +A1:2021 will be implemented in June this year.

Any currently submitted certificate for modification or standard upgrades must also comply with this latest standard.

 

Brazil 巴西

2022 年 3 月 25 日，巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈第102號協定，批准了《用水設備品質和合格評定要求技術法規》。本協議於 2022 年 4 月 1 日生效。

On 25 March 2022, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 102 to approve Technical Regulation on Quality and Conformity Assessment Requirements for Water Consumption Equipment.

The Regulation for Water Consumption Equipment was approved in the form of Technical Regulation on Quality, Conformity Assessment Requirements and Specifications for the Conformity Identification Mark, contained in Annexes I, II and III.

This Regulation applies to water consumption equipment of the following types, regardless of the technology applied:

electrical equipment with water cooling and without water quality improvement;

electrical appliances without water cooling and with water quality improvement;

electric equipment with water cooling and water quality improvement;

all non-electrical equipment that has the characteristic of improving the quality of water for human consumption.

The following products are excluded from the application of this Regulation:

equipment that supplies water without cooling and without performing water quality improvement;

filtering elements or water quality improvement devices, which are replacement components;

products intended to improve water quality through a suction process, such as squeeze bottles, straws, among others;

products intended for the treatment of non-potable water;

equipment for the production of ice;

coolers containing a container and/or hydraulic systems for supplying water and ice;

equipment exclusively intended to supply water for the production of tea, coffee, soups, juices and soft drinks.

The equipment is also under a non-automatic import licensing system, and the importer must obtain consent from Inmetro.

This Portaria entered into force on April 1, 2022.

 

Malaysia 馬來西亞

2022 年電子煙設備的商品說明 (認證和標記) 令已於 2022 年 4 月 5 日在憲報刊登。本地製造或進口的電子煙裝置應在 2022 年 8 月 3 日之前符合商品說明。所有電子煙設備都必須根據 MS 2716:2019 進行測試和認證，其中包括電氣、機械、化學、無線連接 (如適用)、EMC 和功能測試。經認證的電子煙裝置必須貼上 SIRIM MS 標誌，方可銷售和提供給市場。

According to The Ministry of Domestic Trade and Consumer Affair (KPDNHEP) of Malaysia, the Trade Description (Certification and Marking) of Electronic Cigarette Devices (vape device) Order 2022 was gazetted on April 5, 2022 under the Trade Description Act 2011.

Locally manufactured or imported e-cigarette device shall comply with the Trade Descriptions by August 3, 2022.

All e-cigarette devices must be tested and certified according to MS 2716:2019 which includes tests of electrical, mechanical, chemical, wireless connectivity (if applicable), EMC and functional.

The certified e-cigarette device shall be labelled with SIRIM MS mark before it can be sold and offered to the market.