歐盟更新玩具安全指令2009/48/EC協調標準

2021年11月16日,歐盟委員會發布了執行決議(EU) 2021/1992,更新玩具安全指令2009/48/EC參照的協調標準。更新涉及EN 71-2:2020、EN 71-3:2019+A1:2021、EN 71-4:2020和EN 71-13:2021這四項玩具標準,其他標准保持不變。該決議自2021年11月16日起生效。

玩具安全指令2009/48/EC參照的協調標準如下:

 

標準

參照標準

被替代標準

被替代標準

第1部分:機械和物理性質

EN 71-1:2014
+A1:2018

—

—

第2部分:易燃性

EN 71-2:2020

EN 71-2:2011

+A1:2014

2022年
5月15日

第3部分:特定元素的遷移

EN 71-3:2019

+A1:2021

EN 71-3:2019

2022年
5月15日

第4部分:化學實驗裝置及相關活動玩具

EN 71-4:2020

EN 71-4:2013

2022年
5月15日

第5部分:化學玩具除實驗玩具

EN 71-5:2015

—

—

第7部分:指畫顏料要求和測試方法

EN 71-7:2014
+A3:2020

EN71-7:2014
+A2:2018

2021年
11月28日

第8部分:家用活動玩具

EN 71-8:2018

—

—

第12部分:N-亞硝胺和N-硝基衍生物

EN 71-12:2016

EN 71-12:2013

2021年
11月28日

第13部分:嗅覺板遊戲、化妝品套裝和味覺遊戲

EN 71-13:2021

EN 71-13:2014

2022年
5月15日

第14部分:家用蹦床

EN 71-14:2018

—

—

電動玩具

EN IEC 62115:2020
EN IEC 62115:2020
/A11:2020

EN 62115:2005
EN 62115:2005/
A2:2011
EN 62115:2005/
A2:2011/AC:2011
EN 62115:2005/
A11:2012
EN 62115:2005/
A11:2012/AC:2013
EN 62115:2005/
A12:2015

2022年
2月21日

 

再度提醒 – 關於俄羅斯年度稽核 (IM – Inspection Monitoring)

根據2020年12月22日 № 460-FZ號聯邦法令,發證機構需要將其所發證書的年度稽核結果資訊錄入ROSACCREDITATION FGIS系統。

俄羅斯聯邦法律 №184-ФЗ «關於技術法規»、已生效的第 935 和 936 號法令,以及上傳到 FGIS發證系統的已頒發證書相關資訊,為 Rosaccreditation (俄羅斯聯邦認證局) 提供了廣泛的檢查機會。

目前,FGIS 資料庫中已有 1 萬多張證書處於“暫停“狀態,也有多張證書已被取消。

– 由於缺少 IM 資訊,認證機構“АЖ26”的 1900 張 CoC 被暫停;

– 由於缺少 IM 資訊,認證機構“НХ15”的1100張CoC被取消;

– 由於缺少 IM 資訊,認證機構“МО10”的1200張 CoC被暫停;

– 由於缺少 IM 資訊,認證機構“НВ35”的 1100張CoC被取消;

– 由於缺少 IM 資訊,認證機構“МН06”的 900張CoC 被暫停,等等。

考慮到缺少IM資訊所造成的影響,我們通知您實施年度稽核的重要性和必要性。接下來Rosaccrditation (俄羅斯聯邦認證局) 有可能採取更進一步以及更加嚴格的行動來管控未實施IM的證書 。

在更加嚴格的管控行動之前,若您尚未回覆證書的年度稽核資訊,請務必儘快回復;若您手邊有證書尚未得到年度稽核的通知,也請積極主動的通知我們,以避免貴公司的證書遭到暫停或取消。

TÜV德國萊因與俄羅斯最大的發證單位合作多年,多年來致力於幫客戶在歐亞經濟聯盟境內取得證書並解決問題,我們擁有最完整的經驗與最優質的服務。如有疑問,歡迎來電,我們的國際認證專家將為您的產品提供最佳解決方案!

IEC, ISO, ITU三大國際標準組織將合力推動全球淨零排放目標的實現

世界領先的國際標準制定者——國際電子電機委員會 (IEC)、國際標準組織 (ISO) 和國際電信聯盟 (ITU) 已表示了他們對於與聯合國合作應對氣候變化的強烈興趣,並決定成立一個專家小組,提出針對非國家行為體 (non-state actor) 淨零排放承諾的衡量和分析標準。

這三個國際標準制定組織對聯合國秘書長António Guterres在 COP26 的開幕詞中肯定標準的重要性十分讚賞,並願意在此方面更進一步合作,包括分享已廣泛使用的現有標準,以及協助新標準的制定以滿足未來發展的需要。

ISO秘書長 Sergio Mujica 表示:當今世界比以往任何時候都更需要合作,以實現淨零排放承諾。ISO 標準體現了這種合作,並對永續發展的未來至關重要。

IEC秘書長兼首席執行官Philippe Metzger補充:為了協助實現 “全電社會 (All Electric Society)”,IEC提供了廣受認可的中立、獨立、基於共識的制度框架,有助於將淨零排放承諾納入系統和基礎設施,為緩解氣候變化做出具體貢獻。

ITU電信標準局局長Chaesub Lee也表示:國際電信聯盟準備加入全球氣候行動聯盟,制定相關的標準和計畫。我們相信COP26傳達的理念,那就是實現全球淨零排放需要大家團結合作。

IEC、ISO 和 ITU制定了數百個專門用於實現淨零排放承諾的國際標準,包括計算碳排放、定義氣候變遷減緩、制定零碳排技術使用框架與相應措施。各國在制定其永續政策時也經常引用這些標準。

在ITU方面與全球淨零排放有關的資通訊技術標準包括:

  • 為國家和城市提供技術及政策性指引,利用創新的數位技術減少碳排放,並加速氣候變遷調適能力和回復力;
  • 衡量資通訊產業碳足跡的方法學;
  • ICT產業第一個根據UNFCCC 巴黎協定與科學化方法所制定的路徑。

ITU針對全球電信 / 資通訊技術發展的 “Connect 2030 Agenda” 還要求,到2023年,電信 / 資通訊技術產生的溫室氣體淨減排量較2015年的基線增加30%。該決議已有193個成員國通過。

ISO對淨零目標的承諾也在最近的《倫敦宣言》獲得強調。該宣言承諾將確保相關標準有助於加速成功實現《巴黎協定》目標、聯合國永續發展目標,以及聯合國氣候調適能力和回復力的行動呼籲。IEC也對該宣言的目標表示支持。

此外,ISO和IEC的 “氣候行動工具箱 (Climate Action Kit)” 作為對《倫敦宣言》的補充,提供了關於標準如何支持公共政策和影響氣候變遷倡議的案例研究,作為政策制定者在承諾減少溫室氣體淨排放時的輔助參考。

 

相關內容

溫室氣體查驗,實現永續的低碳發展

 

本篇文章是由TÜV萊因氣候行動計劃微信公眾號編輯轉載。

來源:The International Organization for Standardization, Clare Naden, Standards Needed to Achieve Net Zero, Said UNSGat COP26

 

UAE消息快遞!

阿拉伯聯合大公國於11月3日發佈兩項最新消息:

1.RoHS – 2021 年臨時實施指南

2.能效標籤標準UAE.S 5010-1:2019以及UAE.S 5010-5:2019實施指南2.0版

 

1. RoHS – 2021 年臨時實施指南

過渡期: 2021 年 11 月 4 日至2021 年 12 月 31 日

文件要求:

a) 合規聲明 (DoC)

b) 來自任何ISO 17025 認可實驗室的聲明或確認信,確認已委託測試及提供出具測試報告的預計日期

c) 實驗室17025認可證書及認可範圍的副本

注意: 預計完成測試和出具測試報告的日期自證書簽發之日起不得超過 6 個月 (180 天);申請人若未能在此截止日期或之前提供合規報告,已頒發的符合性證書將被取消,其適用的產品也需要召回。

 

2. 能效標籤標準UAE.S 5010-1:2019以及UAE.S 5010-5:2019實施指南2.0版

UAE.S 5010-1:2019: 電器產品能源效率標籤要求第1部分: 家用空調

UAE.S 5010-5:2019: 電器產品能源標籤要求第5部分: 商業和中央空調

根據11月3日發佈的阿拉伯聯合大公國能效標籤標準UAE.S 5010-1:2019以及UAE.S 5010-5:2019實施指南2.0版,執行UAE.S 5010-1:2019 表 1 (第二階段EER限制) 的日期,由原先的2022年1月延後到2023年1月1日。

從 2023 年 1 月 1 日開始,UAE.S 5010-1:2019 涵蓋的所有空調都應符合UAE.S 5010-1:2019 表 1 中規定的第二階段EER 限制,並附有有效的 ECAS/EQM 符合性證書,表明符合最新的適用標準。

根據UAE.S 5010-1:2019 表 1 中規定的第一階段 EER 限制頒發的 ECAS/EQM 合格證書 (CoC) 有效期至到期日或至2022年 12 月 31 日 ,以先到者為準。

德國萊因TÜV 大中華區可以提供相應的安規,能效及RoHS測試及廠檢服務(EQM需要廠檢) 以及通過TÜV 中東公司發證的一站式服務。如您想瞭解具體的發證程序,請聯繫我們諮詢。

2021年11月國際市場准入資訊更新

 

 

資訊 / 電信 ITE / Telecom

Argentina 阿根廷

阿根廷ENACOM近期公佈Resolution 1248/2021,指定INTI國家實驗室為醫療及使用移動通訊技術的產品提供當地測試服務,並將於2022年3月1日開始強制實行。

The National Communication Agency in Argentina (ENACOM) published the Resolution 1248/2021 to officially assign the INTI National Lab as an Accredited Test Laboratory for the following RF Testing:

  • Technical Standard ENACOM-Q2-60.15 V19.1 (Medical Devices)
  • Technical Standard ENACOM-Q2-61.03 V17.1 (User Terminal for Mobile Communications Services)
  • Technical Standard ENACOM-Q2-61.04 V17.1 (Radio Base Transceivers of Mobile Communications Transceivers)

This accreditation has revoked the use of Declarations of Conformity and has triggered the enforcement of mandatory local testing on medical devices and Radio base transceivers, whereas for cellular user terminals  the local testing would become mandatory only when International certification is not available.

This resolution has established an adaptation period of 180 days, hence local testing will be applicable since March 1 of 2022.

 

Kenya 肯亞

[法規草案] 肯亞通信管理局 (CA) 制定了移動訊號中繼器型式批准指南草案。目前CA 正在收集對該指南草案的意見。

The Communication Authority of Kenya (CA) is the regulatory authority for the ICT industry in Kenya with responsibilities in telecommunications, e-commerce, broadcasting, postal/courier services and cyber security. CA is also responsible for managing the country’s numbering and frequency spectrum resources as well as safeguarding interests of consumers of ICT services.

In furtherance of its responsibility on managing frequency spectrum resources, the Authority has developed draft guidelines on type approval of mobile signal repeaters.
The objective of this consultation is to give stakeholders and the public an opportunity to comment on the Authority’s proposal to authorize the use of static mobile phone signal repeaters subject to Type Approval. The technical conditions for Type Approval are contained in the consultation document.

Currently CA is collecting opinions to this draft guidelines.

 

Singapore 新加坡

IMDA 已發出通知延長住宅閘道器 (“RG”)/家用路由器的銷售截止日期以符合標準。由於 IMDA 收到來自行業和 RG 供應商的延長合規時間表的請求,對於新的和現有的 RG/家用路由器型號,IMDA 已決定延長遵守現有 RG/家用路由器型號的技術規範的時間表至 2022 年 5 月 1 日。

這意味著從 2022 年 5 月 2 日起,不符合技術規範或尚未在 IMDA 註冊的 RG/家用路由器型號將不再銷售供本地使用,此類未註冊型號只能由具有經銷商個人許可證的經銷商進口以用於再出口目的。

On 12 October, IMDA had sent out a notice on Extension of Deadline for Sale of Residential Gateways (“RGs”) / Home Routers to Comply with Standards.

Originally The Technical Specification for Security Requirements for Residential Gateways, IMDA TS RG-SEC (the “Technical Specification”), came into force on 13 April 2021. New RG/home router models shall comply with the Technical Specification before the equipment can be sold for use in Singapore. For existing RG/home router models that were registered before 12 Oct 2020, a one-year grace period was given to comply with the Technical Specification, by 12 Oct 2021.

But Since IMDA had received requests from industry and RG vendors for extension of the timeline for compliance, for both new and existing RG/home router models, IMDA has decided to extend the timeline for compliance with the Technical Specification for existing RG/home router models to 1 May 2022.

This means that from 2 May 2022, RG/home router models which do not comply with the Technical Specification, or not yet registered with IMDA, shall no longer be sold for local use. Such unregistered models may be imported for re-export purposes only, by dealers with a Dealer’s Individual Licence.

Please note that RGs/home routers that are compliant with the Technical Specification will qualify for Level 1 of Cyber Security Agency of Singapore (“CSA”)’s Cybersecurity Labelling Scheme (“CLS”). RGs/home routers that comply with the Technical Specification and registered with IMDA are required to have both the IMDA’s

Compliance label and the CSA’s Cybersecurity Label on the equipment or its packaging.

 

RoHS/REACH

Thailand 泰國

2021 年 9 月 8 日,泰國工業部宣佈制定關於可能含有有害物質的電氣和電子設備的工業標準 2368-2564。本公告自2022年1月6日起生效。

On 8 September 2021, the Thai Ministry of Industry announced the establishment of the Industrial Standard 2368-2564 on Electrical and Electronic Equipment that May Contain Hazardous Substances: Restriction of the Use of Certain Hazardous Substances.

This announcement cancels the previous announcement of the Thai Ministry of Industry on the establishment of the Industrial Product Standard TIS 2368-2551, dated 26 May 2008, on Electrical and Electronic Equipment that May Contain Hazardous Substances: Restriction of the Use of Certain Hazardous Substances.

The Standard applies to the electrical and electronic equipment listed in Annex A of TIS 2368-2564.

However, the Standard does not apply to the following products:

  • military equipment used for national security;
  • equipment designed to be launched into space;
  • large industrial equipment;
  • large stationary machines;
  • unauthorized means of transport of persons or goods;
  • non-road handheld machinery designed for professional use only;
  • dental implants medical devices;
  • solar panels installed by experts for use in designated areas;
  • equipment specially designed for research and development purposes only, etc.

The Standard also provides scope, definitions and chemical restriction requirements, etc.

The Announcement enters into force on 6 January 2022.

 

家用電器 House Appliances

Argentina 阿根廷

2021 年 10 月 6 日,阿根廷生產發展部發佈執行關於電烤箱能效的第 319/1999 號決議。該決議確立了能源使用要求和合格評定流程,並參考了 IRAM 標準 62414-1 和 62414-2。 該決議規定了烤箱的標籤要求,並將電烤箱產品和產品認證文件的產品安全責任分配給國內製造商和進口商。

On 06 October 2021, the Argentine Ministry of Productive Development published Resolution No. 1017 to implement Resolution No 319/1999 on Energy Efficiency of Electric Ovens, establishing the entry into force on that date of Resolution No. 319/1999 for electric ovens for domestic use.

The resolution establishes energy use requirements and conformity assessment processes, and refers to IRAM Standards 62414-1 and 62414-2. The Resolution specifies a labelling requirement for the ovens, and assigns to domestic manufacturers and importers the product safety liability for the electric oven products and for the documentation of certification of the products.

 

South Korea 韓國

KATS公告第2021-453號部分電器安全標準修訂。修訂後的標準及相關變化如下:

  • KC 60335-2-44 家用和類似用途電器 – 安全第 2-44 部分:熨燙機的特殊要求 – 未對電機驅動設備進行特定測試以與國際公約保持一致;
  • KC 10018 家用和類似用途電器 – 安全 – 電暖水床墊和床的特殊要求 – 可拆卸蓋電熱水床墊試驗方法的變更;
  • K 10020 家用和類似用途電器 – 安全 – 具有非彈性加熱部件的加熱墊的特殊要求 – 改進異常操作的測試條件和方法,包括放寬異常操作時的表面溫度條件等。

該通知於2021年10月12日生效。

Revision of Safety Standards for Certain Electrical Appliances, KATS Notice No. 2021-453

On 12 October 2021, the Korean Agency for Technology and Standards (KATS) announced the revision of safety standards for certain electrical appliances, in accordance with the Electrical Appliances and Consumer Products Safety Control Act.

The revised standards and relevant changes are as follows:

  • KC 60335-2-44 Household and Similar Electrical Appliances – Safety Part 2-44 : Particular Requirements for Ironers -onon-application of specific tests for motor-driven equipment for harmonisation with international conventions;
  • KC 10018 Household and Similar Electrical Appliances – Safety – Particular Requirements for Electrical Warm-Water Mattresses and Beds -ochange of test method for electrical warm-water mattresses with removable cover;
  • K 10020 Household and Similar Electrical Appliances – Safety – Particular Requirements for Heating Pads with Non-Flexible Heated Part -oimprovement of test conditions and methods for abnormal operation, including relaxation of surface temperature conditions during abnormal operation, etc.

The Notice entered into force on 12 October 2021.

 

燈具 / LED Luminaiaries/LED

Israel 以色列

以色列經濟和工業部於 2021 年 9 月 13 日發佈新修訂的強制性標準:

  • SI 20 第 1 部分: 螢光燈 – 一般照明用途的自鎮流燈 – 安全要求,一般要求和測試
  • SI 60968: 用於一般照明服務的自鎮流螢光燈 – 安全要求

This Notice, issued by the Israeli Minister of Economy and Industry on 13 September 2021, lists mandatory standards newly amended.

Mandatory standards to which changes have been made:

  • 20 Part 1. Fluorescent lamps – Self-ballasted lamps for general lighting uses – Safety requirements, General requirements and tests, June 2018
  • 60968 – Self-ballasted fluorescent lamps for general lighting services – Safety requirements, 2002 and amendment May 2012

 

能源效率要求 Energy Efficiency Requirements

China 中國

[法規草案] 2021 年 9 月 24 日,中國工業和資訊化部 (MIIT) 提出了 2021 年能效之星產品目錄的修訂版。更新後的目錄包含約 370 款認證產品,以納入能效之星計畫。該清單包括消費和工業設備。

On 24 September 2021, the Chinese Ministry of Industry and Information Technology (MIIT) proposed a revised version of the Energy Efficiency Star Products Catalogue for 2021. The updated catalogue contains approximately 370 models of certified products for inclusion in the Energy Efficiency Star Program. The list includes both consumer and industrial equipment.

Once finalised, the updated list of Energy Efficiency Star Certified Products for 2021 would include, inter alia:

  • Electric washing machines: automatic washing machines with wave wheels;
  • Electric washing machines: drum washing machines;
  • Water heaters: gas fast water heater;
  • Water heaters: gas heating and hot water heater (dual-purpose type);
  • Water heaters: heat pump water heaters (appliances);
  • Room air conditioners: Heat pump type room air conditioners;
  • Room air conditioners: low ambient temperature air source heat pump heaters;
  • Heat pumps: low ambient temperature air source heat pump (chilled water) units;
  • Heat pumps: multi-connected air conditioning (heat pump) units;
  • Heat pumps: water (ground) source heat pump units;
  • Rotary air compressors;
  • Domestic refrigerators: wine storage cabinets;
  • Domestic refrigerators-freezers;
  • Domestic refrigerators with wine storage cabinet;
  • Refrigerators (cabinets): self-contained condensing units commercial freezers;
  • Cooker hoods;
  • Rice cookers;
  • Dishwashers;
  • Electronic displays;
  • Microwave ovens;
  • Electric fans.

 

India 印度

BEE延長儲能式電熱水器的星級標籤。BEE 將強制性制的儲水式電熱水器星級表的有效期延長至 2022 年 12 月 31 日。對於希望使用批准的標籤的註冊製造商/許可證持有者,需於 2021年11 月12日前提交修改後的標籤、預發票。

BEE extends the validity of existing star rating table for Storage type electric water heater under mandatory regime to 31 December, 2022.  For those registered manufacturer/permittees who wish to use the approed BEE start label need to submit revised label, proforma before November 12, 2021.

 

Taiwan 台灣

修正「微波爐節能標章能源效率基準與標示方法」,並自2021年9月24日即日生效。

本規範適用於符合CNS 60705 要求的家用微波爐,申請節能標章,需檢附 附件一之微波爐測試樣品描述及說明表。

微波爐節能標章能源效率標示,應符合下列規定:

(一) 標章使用者之名稱及位址,須清楚記載於產品或包裝上

(二) 前款使用者若為代理商時,製造商之名稱及位址須一併記載於產品或包裝上。

(三) 產品型錄上應標示產品之能源效率 (%)、待機模式耗電 (瓦,W)、關機模式耗電 (瓦,W);組合式(複合型)微波爐除以上項目外,尚須標示燒烤能耗 (瓦時/攝氏溫度,Wh/℃)。

(Voluntary) Amendment of “Energy Efficiency Criteria and Labeling Method for Label Qualified Microwave Ovens”

The Taiwan Bureau of Energy approved a new version of “Energy Efficiency Criteria and Labeling Method for Energy Label Qualified Microwave Ovens” on September 24 with immediate effective.

These rules apply to the microwave ovens that meet the requirements of Taiwan CNS 60705.

To apply for the Energy Efficiency label for microwave ovens, a description of the microwave oven test sample needs to be attached.

The product labeling requirement:

1. The name and address of the label user shall be clearly displayed on the product or product packaging.

2. If the label user is an agent, the name and address of the product manufacturer shall also be displayed on the product or product packaging.

3. The product’s energy efficiency(%), standby mode power consumption(W), and shutdown mode power consumption(W) need to be provided. In addition to the above items, combined microwave ovens must also indicate grill function energy consumption(WH/℃).

 

Taiwan 台灣

訂定​「微波爐容許耗用能源基準、標示及檢查方式」,自2021年1月1日生效。

Requirements on Minimum Energy Performance Standard, Energy Efficiency Indication and Inspection for Microwave Ovens

The Taiwan Bureau of Energy approved ”Requirements on Minimum Energy Performance Standard, Energy Efficiency Indication, and Inspection for Microwave Ovens” on September 17, 2021.

The microwave ovens refer to those meeting the definition of microwave ovens in CNS 60705 and promulgated by the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) as products requiring inspections.

However, this does not apply to the microwave ovens of the following conditions:

(1) Microwave ovens with diameter of load ≤200mm, or height of  load ≤120mm

(2) Rated power input 3300W

The testing and calculation methods shall comply with the following specifications:

•The rated output power shall be tested in accordance with the relevant provisions of CNS 60705 (Methods for measuring performance);

•The energy efficiency values shall be tested and calculated in accordance with CNS 60705;

•The standby power consumption shall be tested and calculated in accordance with CNS 62301(Measurement of standby power).

As per Article 3, the rated output power, rated standby power, and energy performance of the microwave shall appear on a label affixed to the product or its smallest packaging.

The minimum energy performance standard is set out in Schedule 1 and reads as follows:
 

Energy Efficiency (%)

Standby Power (W)

54

Standby mode £ 1.00 W ;
for products rated power consumption ≥ 2,500 W or
with network mode £ 2.00 W

 

Taiwan 台灣

根據能源政策,BSMI提案空氣清淨機應符合CNS 16098:2019。

依能源局已通過之能源效率及待機功率應符合“最低能效標準、能效等級要求”,該產品的合格評定程式保持不變,即產品認證註冊 (RPC) 或型式逐批檢驗 (TABI)。

Proposal for amendments to the legal inspection requirements for air-cleaning appliances

In line with the energy policy, the BSMI proposes to require that air-cleaning appliances be subject to CNS 16098: 2019. The measured efficiency and standby power shall comply with the Table of “MEPS for Air Cleaners” as stated in “Requirements on Minimum Energy Performance Standard, Energy Efficiency Rating Labelling and Inspection for Air Cleaners” to be adopted by the Bureau of Energy, which was notified as G/TBT/N/TPKM/451.

The conformity assessment procedures for products subject to this notified measure remain the same, i.e. Registration of Products Certification (RPC) or Type-Approved Batch Inspection (TABI).

 

其他 / 多主題產品 Others / Products with Multiple Subjects

Argentina 阿根廷

阿根廷商務部於2021 年 10 月 12 日發佈第 1038/2021 號決議,對之前關於阿根廷電氣安全認證的第 169/2018 號決議進行了多項更改。

本次更新的要點如下:

• 需要強制性電氣安全認證的 50V 以下電氣產品的新範圍,包括:

o LED 燈和 LED 模組 (從 2021 年 10 月 12 日起)

o 電力馬達驅動的: 電動工具,台式工具,園林工具 (從 2022 年 10 月 11 日起)

o 用於皮膚和頭髮護理的手動產品 (刮鬍刀、按摩設備等) (從 2022 年 10 月 11 日起)

o 具有加熱、切割、加工或混合食品或飲料功能的家用電器廚房設備 (從 2022 年 10 月 11 日起)

• 強制實施 S-Mark (模式5) 的產品清單已更新以引入新產品,並於 2022 年 7 月 8 日起強制實施。

• 證書模式的監管週期已修訂:

o 對於型式認證模式 (模式 4) ,每 6 個月需要進行一次監管

o 對於 S-Mark 認證模式 (模式 5),每 12 個月需要進行一次監管

On 12 October 2021, Secretary of Commerce has published Resolution 1038/2021 to introduce several changes to former Resolution 169/2018 for Electrical Safety Certification in Argentina.

The keypoints for this update are as follows:

  • New scope of electrical products under 50V that will require mandatory Electrical Safety Certification including:

o Led lamps and led-mounted modules (from October 12th, 2021)

o Hand tools, transportable, and lawn and garden machinery, powered by electric motor (from October 11th, 2022)

o Manual products for skin and hair care (razors, massage equipment, among others) (from October 11th, 2022)

o Household electrical kitchen equipment that performs the functions of heating, cutting, processing or blending food or beverages (from October 11th, 2022)

  • The list of products subject to mandatory S-Mark (System No. 5) Scheme has been updated to introduce new ones, being mandatory to be implemented from July 8th, 2022.
  • The surveillance periodicity for certificates schemes have been revised:

o For S-Type (System No. 4) Certification Scheme surveillances will be required every 6 months

o For S-Mark (System No. 5) Certification Scheme surveillances will be required every 12 months

 

Australia 澳洲

澳洲於9月17日新發佈的插頭與插腳標準AS/NZS 3112:2017 +A1:2021,有9個月的過渡期,將于明年6月執行。

on 17 September 2021 Australia announced AS/NZS 3112:2017 Amd 1:2021 – Approval and test specification — Plugs and socket-outlets. There is a transition period of 9 months. AS/NZS 3112:2017 Amd 1:2021 will enter into force in June of 2022.

 

India 印度

BIS公告 IS 1293: 2005 版“額定電壓不超過 250 V 和額定電流不超過 16 A 的家用和類似用途的插頭和插座”的修訂版標準 IS 1293: 2019 實施日自2021/10/23 推遲至2022/10/23後執行。

Bureau of Indian Standard has released a notification where the IS 1293: 2005 is superseded by IS 1293: 2019, “Plugs and Socket-Outlets for household and similar purposes of rated voltage upto and including 250V and rated current upto and including 16 A” stand extended upto 23rd October 2022.

 

India 印度

《電氣設備 (質量控制) 令,2020》原定2021年11月11日強制納入CRS scheme已公告延至2022年11月11日執行。

Ministry of Heavy Industries under Bureau of Indian Standards notified below 8 products under Electrical Equipment Quality Control Order 2020 on 11th November 2020.

1.Low – Voltage switchgear and controlgear: Circuit Breakers

2.Low – Voltage switchgear and controlgear: switches, disconnectors, switch disconnectors and fuse Combination units

3.Low – Voltage switchgear and controlgear: electromechanical contactors and motor Starters

4.Low – Voltage switchgear and controlgear: a.c semiconductor motor controllers and starters

5.Low – Voltage switchgear and controlgear: a.c. semiconductor motor controllers and contactors for non – Motor loads

6.Low – Voltage switchgear and controlgear: electromechanical control circuit devices

7.Low – Voltage switchgear and controlgear proximity switches

8.Low – Voltage switchgear and controlgear: electrical emergency stop devices with mechanical latching function

In pursuance of the Notification released, the Quality Control Order was coming into effect on 11th November 2021 but the timeline for implementation of this Quality Control order for the above said Products stands extended till November 11th 2022.

 

Taiwan 台灣

預告修正「商品檢驗標示使用辦法」第三條、第九條。

為符合現今資訊科技發展趨勢,以便於消費者可即時以數位判讀方式獲知商品檢驗合格與否之資訊,為保障消費者權益,經濟部標準檢驗局指定公告應施檢樣商品之檢驗標誌應含有二維條碼碼試行草案要點:

一、二維條碼無須緊鄰商品檢驗標識之基本圖示、得於包裝上單獨呈現。

二、基於減輕業者成本負擔之考慮,並因應不同商品型態各異,二維條碼之標示方式應更多元,以配合實務需要。

Draft amendment on Article 3 and 9 of “Regulations Governing the Use of Commodity Inspection Mark” with QR code

In order to comply with the current trend of information technology development, Taiwan government proposed to request the products inspected by the BSMI with BSMI logo should contain a QR code.  It will help the consumers to obtain the information of product and to identify whether it is qualified or not through digital interpretation, and to protect the rights and interests of consumers.  Since the QR code is the same property as the designated code of the identification number, both are the part of the product inspection mark.   QR code doesn’t need to be adjacent to the basic image of the product inspection mark; it can be presented separately on the package, and it is added according to the exceptions of item1 of article 3 of regulation that will help the manufacturers have the flexibility to place the QR code on the product.

德國萊因在全球離岸風電峰會分享綠氫策略及認證

全球風能理事會 (GWEC) 與歐洲在台商務協會 (ECCT) 共同舉辦「2021全球離岸風電產業高峰會- 台灣」於 2021 年 10 月 26 日在台北圓滿閉幕。行政院沈榮津副院長及經濟部王美花部長開幕致詞,並由經濟部能源局游振偉局長、工業局楊志清副局長、交通部航港局劉志鴻副局長、維特斯離岸風電公司、沃旭能源、達德能源、西門子歌美颯、哥本哈根風能等國際大廠共同參與論壇。在第四個議題「利用風能產製綠氫」,德國萊因氫能技術能力中心部門經理 Mr. Norbert Heidelmann 受邀演講「歐洲綠氫發展策略及認證」,分享專業經驗。

德國萊因大中華區工業服務及資訊安全事業群能源及環保處總經理高鴻鈞於峰會現場表示:「由風能等再生能源所產製的綠色氫能,不會排放溫室氣體,因此離岸風電扮演儲能與電力多元轉換成氫能的關鍵角色,同時綠色氫能也是未來實現零碳排放的重要選擇。」。德國萊因氫能技術能力中心 Mr. Norbert Heidelmann 的演講首先以3D 動畫介紹在氫能產業鏈中的綠氫及藍氫的戰略位置。接著說明全球及歐盟的綠氫發展狀況,包括歐盟再生能源指令修訂版 (RED II) 在 2020 至 2050 年三個階段的綠氫發展策略與10大推薦做法,值得台灣借鏡。

Mr. Heidelmann 進一步分享德國政府教育及科技研究部 (BMBF) 推動的儲能與電力多元轉換 (Power-to-X) 政策,針對風能和太陽能發電會隨天氣變化而波動而導致電量過剩,或造成電網擁塞問題,必須以Power-to-X 技術讓離岸風電能夠產生氫氣、其他能源載體或能源型化學品。德國政府積極投資鼓勵大型企業開發供應鏈新技術,其中 H2Giga 計畫有 112 夥伴大量生產製氫電解槽;H2Mare 計畫投資西門子等企業開發離岸風電製氫技術;而TransHyDe計畫則有85家廠商、學術單位、協會共同開發高壓氫氣容器運輸船、液態氫運送、液態有機氫載體輸送管網等解決方案。這些計畫都是綠氫產官學界合作的典範。

價值鏈從為發電、製氫、儲氫、運氫、輸氫到終端用氫等階段,其碳足跡的消長變化必須透過盤查及認證手段來確認是否達到零碳目標並找出改善機會。因此 Mr. Heidelmann 強調除了ISO 14064溫室氣體盤查、ISO 14067 產品碳足跡盤查及 ISO 14040 環境管理的生命週期評估的機制之外,德國萊因還公佈了 TÜV萊因 H2.21 碳中和及氫能認證標準,可協助企業認證氫能價值鏈在不同階段組合的碳足跡,包括離岸風電製氫產業。所以不論是綠氫、藍氫(含碳捕捉及利用)、淺綠氫(通過天然氣的熱解產生的元素碳副產品)或灰氫系統,德國萊因 H2.21 都可以驗證其氫能碳足跡的成效。Mr. Heidelmann 同時也介紹了 TÜV 萊因 H2.21 的評估原理、認證流程及不同產業別的應用彈性。

最後 Mr. Heidelmann 總結德國萊因的氫能價值鏈服務,包括產品安全、製程安全、產品品質、系統智能化及永續管理等各種方面需求,都涵蓋到測試、檢驗、驗證、認證、人員培訓、技術諮詢等技術服務,期待能夠攜手離岸風電及氫能價值鏈產業共同邁向永續發展。

 

 

 

2021年10月國際市場准入資訊更新

資訊 / 電信 ITE / Telecom

Chile 智利

智利SUBTEL 更新 Resolución 1985 Exenta, 這是適用於短距離設備的技術標準。

On July 27, 2021 the authority Subsecretaría de Telecomunicaciones (SUBTEL) in Chile updated the Resolución 1985 Exenta. This is the Technical Standard applicable to Short Range Devices.

Among the few changes, below should be highlighted to our clients:

  • 13.553 a 13.567 kHz freq. range was added for the use in medical applications, with maximum electric field intensity 20 mV/m at 30 meters.
  • Access Points now may operate outdoors in the 5925-7125 MHz frequency band also, if using internal batteries and with a maximum EIRP of 17 dBm.

 

Kuwait 科威特

CITRA 發布了用於型式批准的新規定 (僅限阿拉伯語)。主要變化:

1. 批准有效期從 1 年增加到 3 年

2. 在更新的情況下,批准 ID 保持不變

3. 續展申請只能在到期前 3 個月開始,但不得超過到期後 20 天。 如果在這些限制內沒有收到申請,證書將被取消。

此新規定沒有過渡期。

CITRA published a new regulation (Arabic only) for type approval. Main changes:

1.Approval validity increased to 3 years from 1 year

2.Approval ID is maintained unchanged in case of renewal

3.Renewal application can only start 3 months before expiry but no more than 20 days after expiry. If no application is received within these limits, the certificate will be cancelled

There is no transition period.

 

Saudi Arabia 沙烏地阿拉伯

CITC 近期更新:

1. 電氣安全標準 EN62368 成為強制性標準。

2. ICT 設備需要在其軟件中嵌入 CITC 電子標籤作為合規證明;電子標籤應貼有型式認可證書編號 (TA xxxx-y)。

There are two updates after the recent changes made by CITC:

1.Electrical safety standard EN62368 becomes mandatory.

2.From now on ICT Equipment is required to have CITC E-Label embedded in their software as a proof of compliance:

The E-label should be affixed with the type approval certificate number (TA xxxx-y).

With ICT Equipment are considered Mobile Phones, Tablets, Mobile Computers, Mobile Routers CPEs, Cellular IoT devices. E-Label also applies to other type of end-products embedding a radio transmitter module.

 

South Korea 韓國

KC 62368-1 自2021.08.27發佈後,目前韓國發證機構已經接受案件申請,MoU 只接受 IEC 62368-1: 2018 (第三版) 的CB 轉證。

過渡期2022年12月31日前,KC 60065、K 60950-1兩個標準仍可接受申請KC轉證,2023年1月1日起,KC 60065、K 60950-1標準失效,只接受KC 62368-1 轉證。

舊標準的KC 證書在產品無任何變更的前提下證書不受影響繼續有效。

如果產品有變更,2023年1月1日前可以按照舊標準進行產品變更評估而不必變更標準。

2023年1月1日起需要按照新的KC 62368-1 標準的要求來進行產品變更評估同時更新標準。

舊標準證書升級為KC 62368-1 標準後,是否可以保留原KC證書號,目前發證機構仍在討論中。

Since the release of KC 62368-1 on August 27, 2021, the Korean certification bodies have accepted project applications, and MoU only accepts CB with third edition (IEC 62368-1:2018).

Before December 31, 2022, it is the transition period. Clients can still use IEC 60065 and IEC 60950-1 to apply for KC 60065 and K 60950-1 certificate. Starting from January 01, 2023, KC 60065 and K 60950-1 standards become invalid; only KC 62368-1 will be accepted. The KC certificate of the old standards will continue to be valid without any changes on the premise of the product.

If there is any change in the product, the product change assessment can be carried out according to the old standards before January 01, 2023, without changing the standard. Starting from January 01, 2023, it is necessary to evaluate product changes and update the standards in accordance with the requirements of the new KC 62368-1 standard.

After the old standard certificate is upgraded to the KC 62368-1 standard, whether the original KC certificate number can be retained is still under discussion by the certification bodies.

 

Thailand 泰國

TISI 宣佈取消原生效日期為 2021 年 8 月 28 日的 TIS1195-2561 (音頻、視頻和類似電子設備 – 安全要求)。TISI 稍後將宣佈使用 TIS62368 Book 1-2563 來規範 20 種音頻、視頻、資訊和通信技術產品,作為 TIS1195-2536 的替代標準,但是 TIS62368 Book 1-2563的發布時間目前未知,尚需要等待。

TISI has officially announced following notification.

Ministry Rule: Cancellation of Ministry Rule to regulate Industrial products: Audio, Video, and Similar Electronic Apparatus – Safety Requirements B.E. 2564

http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/A/054/T_0019.PDF

Summary of announcement:

TISI had previously announced TIS1195-2561 and cancel TIS1195-2536 on March 2, 2021 with effective date of August 29, 2021. With this new ministry rule, TISI announced to cancel TIS1195-2561 with effective date of August 28, 2021.

2) TISI will announce TIS62368 Book 1-2563 to regulate 20 products of audio, video, information and communication technology products at later stage. While waiting for TIS62368 Book 1-2563, TIS1195-2536 will remains its effectiveness.

 

電池 Battery

Australia 澳洲

澳洲消委會ACCC公告紐扣電池將列入強制標準產品。

澳洲政府引入了四項強制性標準,以降低與使用紐扣和紐扣電池相關的死亡和傷害風險。 這些標準適用於紐扣扣電池,以及包含它們的產品。新標準於2020年12月21日推出,有18個月的過渡期, 並將於2022年6月22日成為強制性規定。

ACCC announced a new mandatory standard for button/coin batteries. They will become mandatory on 22 June 2022.

The Australian Government has introduced four mandatory standards to reduce the risk of death and injury associated with the use of button and coin batteries. The standards apply to both button cell and coin cell batteries, and to the products that include them. The new standards were introduced on 21 December 2020. There is an 18-month transition period where you can choose to start using the new standards.

 

家用電器 House Appliances

Argentina 阿根廷

[法規草案] 2021 年 9 月 2 日,阿根廷國內貿易秘書處提出了一項關於家用便攜式和嵌入式電烤箱的能效和性能標籤的決議草案。 該草案規定了家用便攜式和嵌入式電烤箱的能效要求,協力廠商發證要求以及標貼使用要求。如果草案被接受,該決議自公佈之日起生效。

On 2 September 2021, the Argentine Secretariat for Internal Trade proposed a Draft Resolution on Energy efficiency and Performance Labeling for Portable, Built-in Electric Ovens for Domestic Use.

The draft establishes energy efficiency requirements under Resolution No. 319/1999 for portable, installed, and built-in electric ovens, for domestic use.  The requirements will be considered fulfilled if the requirements set forth in this measure are met as well as those established in the IRAM 62414-1 and 62414-2 standards.

The measure sets out labeling and third-party certification requirements, and prohibits the importation and commercialization of these products if they do not comply with the provisions set forth in this draft resolution.

The documentation required for certification must be submitted through the specified online platform.

This Draft holds an Annex that contains all energy efficiency labelling requirements and mentions that the label must be legible and affixed to the front of the electric oven in such a way that it is not obscured or hidden, enabling clear visibility.  The label must remain on the product at least until it is purchased by the end-user.

If accepted, the Resolution shall enter into force from the date of its publication.

 

India 印度

能源效率局將屬自願計畫中的冷藏庫、輕型商用空調 (LCAC) ,和冷卻器星級評定表之有效期,,延長至 2022 年 12 月 31 日,並建議從 2023 年 1 月 1 日起強制實施星級標籤計劃。

BEE Extend the validity of the existing star rating table for Deep Freezers, Light Commercial Air conditioners (LCAC), and Chillers under the Voluntary regime until 12/31/2022 and proposes to make the star labeling program mandatory from 01/01/2023

All manufacturers/permittees of Deep freezer and Light Commercial Air conditioners (LCAC) under the S&L program of BEE are hereby informed that the validity of the existing star rating table for Deep freezer and LCAC under the voluntary regime has been extended till 31st December 2022.

For Chillers under S&L program of BEE voluntary regime, the revised sample label validity period would be from 1st January, 2019 to 31st December, 2022.

Also, kindly note that the Star Labeling program for above 3 products are proposed to be made mandatory from 1 January 2023 and all manufacturers are therefore requested to develop requisite infrastructure and seek NABL/ILAC accreditation for in-house test set up as appropriate.

 

Mexico 墨西哥

2021 年 9 月 15 日,聯邦公報發布了針對家用和商用熱水器的強制性要求, 該產品也是落入標準 NOM-003-SCFI-2021範圍。 該標準將在發布後 180 天執行,也就是 2022 年 3 月 15 日開始強制。

On September 15th 2021 was published on the Federal Gazette the mandatory standard NOM-003-SCFI-2021, Thermal efficiency of water heaters for domestic and commercial use. Boundaries, testing and labeling methods. This Official Mexican Standard establishes the minimum levels of thermal efficiency that water heaters for domestic and commercial use must meet, the test methods that must be used to verify such compliance, and the requirements that must be included in the label as well as the conformity assessment procedure. The standard will be enforced on 180 days after its publication, which would be around March 15th 2022.

 

Taiwan 台灣

洗衣機節能標章能源耗用基準與標示方法,110年8月26日公告修正,並自112年9月1日生效。

本次修訂將採用的標準修訂為 CNS 60335-2-7。 並更新了洗淨洗清每公斤衣物所實測耗電量基準值。

洗衣機能源效率基準:

 

機種 洗淨比 洗清比 脫水度(%) 洗淨洗清每公斤衣物

所實測耗電量(kWh/kg)

直立式

(噴流式、渦卷式、攪拌式)

0.8 1.0 45 0.0054
滾筒式 0.6 1.0 45 0.0077

 

洗衣機節能標章產品能源效率標示,應符合下列規定:

1.標章使用者之名稱及住址,須清楚記載於產品或包裝上。

2.前款使用者若為代理商時,製造商之名稱及位址須一併記載於產品或包裝上。

3. 產品型錄上應標示產品之能源效率值。

洗衣機能源效率試驗條件及方法須符合JIS C9606之要求。

Energy Conservation Labelling Program Requirements for Washing Machines – Amendment Order No. 11005006720, 2021

Taiwan’s Bureau of Energy, Ministry of Economic Affairs published an amendment of the Energy Conservation Labelling Program Requirements for Washing Machines,  Order No. 11005006720, on 26 August 2021 and it will enter into force on 1 September 2023.

This amendment revised the adopted standard to CNS 60335-2-7.  And updated the measured power consumption per kilogram of laundry.

 

​Type ​Washing ratio ​Cleansing ration ​Dehydration
(%)
​The power consumption per kilogram of laundry (kWh/kg)
​Upright washing machine
(Jet type/Scroll type/Stirring type)
​0.8 ​1.0 45​ 0.0054​
​Drum washing machine ​0.6 ​1.0 ​45 ​0.0077

 

The energy efficiency labelling of the washing machines must contain the following information:

1. The name and address of the user of the label should be recorded on the product or packaging;

2. For an agent, the manufacturer’s name and address must be recorded on the product or packaging;

3. The energy efficiency value of the product should be indicated on the product catalogue.

The energy efficiency testing of washing machines must comply with the requirements of JIS C9606.

 

Thailand 泰國

泰國工業部於 2021 年 8 月 31 日發佈了家用洗衣機的工業標準 TIS 1462-2562 (2019)。該標準規定了家用洗衣機的能效要求,並將於 2022 年 2 月 27 日起強制執行。

This Ministerial Regulation was published by the Thai Ministry of Industry on 31 August 2021, under the authority of the Industrial Product Standards Act.

The Regulation primarily requires that clothes washing machines for household use must comply with Industrial Standard TIS 1462-2562 (2019) specifying the energy efficiency requirements of said products, and notified by Announcement No. 5990 on 28 October 2020.

The standard will be mandatory with effect from 27 February 2022.

 

Thailand 泰國

家用冰箱和冰箱冰櫃的強制性泰國工業標準 TIS 2186 – 2561 (2018),已於 2021 年 8 月 29 日起生效。

This Ministerial Regulation was published by the Thai Ministry of Industry on 2 March 2021, under the authority of the Industrial Product Standards Act.

The Regulation requires that certain household refrigerators and refrigerator-freezers, such as refrigerators/freezers using compressed air cooling system and alternating current meet Thai Industrial Standard TIS 2186 – 2561 (2018) specifying the energy efficiency requirements of said products, and are approved in accordance with the Announcement No. 5711 of the Ministry of Industry dated 29 May 2020.

The standard will be of mandatory application with effect from 29 August 2021.

 

燈具 / LED Luminaiaries/LED

Thailand 泰國

泰國工業部於 2021 年 8 月 31 日發佈強制性泰國工業標準 TIS 2779-2562 (2019) 及TIS 2780-2562 (2019),涉及產品為替代直管形螢光燈的雙端LED燈及電壓高於 50 V 的一般照明用自鎮流 LED 燈,標準將於 2022 年 3 月 29 日生效。

Mandatory Safety Requirements for Double-Capped LED Lamps Designed to Retrofit Linear Fluorescent Lamps and for Self-Ballasted LED-Lamps for General Lighting Services by Voltage Higher than 50 V

The Thai Ministry of Industry published Ministerial Regulation B.E. 2564, 2021 on 31 August 2021, under the authority of the Industrial Product Standards Act.

The Regulation primarily requires that double-capped LED lamps designed to retrofit linear fluorescent lamps meet the Thai Industrial Standard TIS 2779-2562 (2019) specifying the safety requirements of said products, and are approved in accordance with the Announcement No. 5865 of the Ministry of Industry of 10 August 2020.

The Regulation also primarily requires that self-ballasted LED-Lamps for general lighting services by voltage higher than 50 V meet Thai Industrial Standard TIS 2780-2562 (2019) specifying the safety requirements of said products, which are approved in accordance with Announcement No. 5866 of the Ministry of Industry dated 10 August 2020.

Both TIS 2779-2562 (2019) and TIS 2780-2562 (2019) standards will be of mandatory application with effect from 29 March 2022.

 

能源效率要求 Energy Efficiency Requirements

Chile智利

[法規草案] 智利能源部於2021 年 9 月 8 日向世界貿易組織 (WTO) 通報了一份家用燈能效標籤設計更新的檔草案。 向WTO提出意見的截止日期為 2021 年 11 月 7 日。

主要適用的家用燈具有:CFL燈,LED燈,螢光燈,鹵鎢燈,帶反射屏的的鹵鎢燈等協定中提到的燈具產品。

On 8 September 2021 the Ministry for Energy notified the World Trade Organisation (WTO) of a draft document updating the design of the energy efficiency label of household lamps in order to make it more useful to consumers. The new label aims to better inform consumers about the energy efficiency level of lamps of different technologies. It also specifies the criteria for reporting equivalences with incandescent lamp technology.

Deadline for comments to the WTO is set for November 7, 2021.

The new EE Label applicable for CFL lamps, LED lamps, Fluorescent lamps (single and double cap), halogen tungsten lamp, halogen tungsten lamp with dichroic reflector, and other where the SEC protocols requires the use of this EE Label.

 

Indonesia 印尼

印尼能源和礦產資源部於2021 年 6 月發佈了關於能源消耗設備最低能源性能標準應用的第 14 號條例。該法規要求生產商和進口商替能源回收設備申請 SKEM 標誌,以表明該設備符合最低能效限制和標準。能源回收設備上也必須貼有節能標誌標籤。

第 14 號條例於 2021 年 6 月 22 日生效。

In June 2021, the Indonesian Ministry of Energy and Mineral Resources issued Regulation No. 14 concerning the Application of Minimum Energy Performance Standard for Energy Consuming Equipment.

This Regulation obliges producers and importers to apply the SKEM mark (the next Minimum Energy Performance Standard) to energy recovery equipment to show that the equipment meets the minimum energy efficiency limits and criteria. An Energy Saving Sign Label must also be displayed on energy recovery equipment.

In addition, the Regulation repealed Regulation No. 57/2017 on Minimum Energy Performance Standards and Inclusion of Energy Efficient Labels for Air Conditioning Devices and Regulation No. 18/2014 on the Energy Efficiency Labelling of Self-Ballasted Lamps.

The Certificate of Energy Saving for Air Conditioning Appliances, issued prior to the entry into force of this Ministerial Regulation, is declared to remain valid until the term of the Energy Saving Certificate expires.

At the time this Ministerial Regulation comes into force:

  • the result of the self-ballast lamp test from the Testing Laboratory that has been determined before this Ministerial Regulation came into force, is declared to remain valid for one application of the Energy Saving Certificate;
  • Domestic Producers and Importers of self-ballasted lamps who already had the determination of test results before this Ministerial Regulation came into force, must apply for the issuance of Energy Saving Certificates in accordance with the provisions in this Ministerial Regulation within a period of no later than 12 (twelve) months since this Ministerial Regulation came into force.

Regulation No. 14 entered into force on 22 June 2021.

 

Ukraine 烏克蘭

[法規草案] 烏克蘭能源部於2021 年 9 月 3 日提出修訂草案,批准《耗能設備能源標籤技術法規》。目前正在收集意見中, 一旦獲得批准,該命令將於 2023 年 8 月 1 日生效。

On 3 September 2021, the Ukrainian Ministry of Energy proposed a revised draft Order approving Technical Regulation on Energy Labelling of Energy-consuming Devices. This Technical Regulation is modelled on Regulation (EC) No 2017/1369 of the European Parliament and of the Council of 4 July 2017 setting a framework for energy labelling.

It provides for the labelling of those products and the provision of standard product information regarding energy efficiency, the consumption of energy and of other resources by products during use and supplementary information concerning products, thereby enabling customers to choose more efficient products in order to reduce their energy consumption.

Once approved, the Order will enter into force on 1 August 2023.

Comments and suggestions from individuals and legal entities are accepted until 3 October 2021 in electronic form to the e-mail address standartsaee@gmail.com or oksana.kolosova@mev.gov.ua.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

Thailand 泰國

泰國工業部於 2021 年 9 月 8 日發佈並即日實施一系列新的工業標準:

TIS 62841 Part 3(13)-2564: 關於電動手持工具、移動工具和草坪園藝機械,對可移動鑽頭的特殊要求。

TIS 62841 Part 3(14)-2564: 關於電動手持工具、移動工具和草坪園藝機械,對可移動排水溝清潔器的特殊要求。

TIS 62885 Part 2-2564: 關於家用或類似用途幹式真空吸塵器的性能測量方法。

TIS 62885 Part 8-2564: 關於表面清潔設備 – 商業用乾式真空吸塵器的性能測量方法。

The Thai Ministry of Industry issued with immediate effect on 8 September 2021 several Industrial Standards:

  • TIS 62841 Part 3(13)-2564 on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 3-13: Particular Requirements for Transportable Drills, in accordance with the Industrial Product Standards Act.
  • TIS 62841 Part 3(14)-2564 on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 3-14: Particular Requirements for Transportable Drain Cleaners, in accordance with the Industrial Product Standards Act.
  • TIS 62885 Part 2-2564 on Dry Vacuum Cleaners for Household or Similar Use – Methods for Measuring the Performance, in accordance with the Industrial Product Standards Act.
  • TIS 62885 Part 8-2564 on Surface Cleaning Appliances – Part 8: Dry Vacuum Cleaners for Commercial Use – Methods for Measuring the Performance, in accordance with the Industrial Product Standards Act.

 

UAE 阿拉伯聯合大公國

阿拉伯聯合大公國標準化與計量局Emirates Authority For Standardization & Metrology (ESMA)更名為工業與先進技術部Ministry of Industry and Advanced Technology (MoIAT)。

此變化對於阿拉伯聯合大公國產品認證流程及技術規範都沒有影響。證書格式會採用新的MoIAT憑證範本。

MoIAT Conformity and Standards eServices Theme Enhancement and Unification

Emirates Authority for Standardization and Metrology (ESMA) has been renamed to Ministry of Industry and Advanced Technology (MoIAT), it has been published Unified theme on Conformity and Standards eServices.

No final certificates will be issued under ESMA anymore. Also, there is no changes in the workflows or processes of issuance.

MoIAT issuance service will be continue as usual, and all issued certificates from now on will follow the new MoIAT format.

The Customs in UAE is already aware of the government rebrand process, there are no issues with valid certificates.

歐洲鋼鐵工業面臨碳預算超額的風險,淨零目標難以實現

據《行業追蹤》(Industry Tracker) 最新報告,歐洲鋼鐵工業剩餘碳預算不足26%,並將在2035年前超出該數字,表明該行業如不立即採取重大變革措施,將無法實現淨零目標。

報告稱2033年前,公司將逐步停用當前的煉鋼工藝,並投資開發新的生產技術,並指出本次過渡轉型費用將高達40億至340億美元。

據預測,鋼鐵行業目前的碳資產到2035年將排放23億公噸二氧化碳,到2050年,將達到30億公噸。《鋼鐵零排放》(Steeling for Net Zero) 報告稱,鋼鐵行業必須轉變當前的經營模式,對古老的工藝技術進行升級,重新調整碳中和計畫。

該報告對歐洲十大鋼鐵公司的碳排放量進行了評估,這幾家公司的鋼鐵總產量占整個歐洲鋼鐵總產量的68%,其中八家公司設立了減排目標,另有三家公司排放預算已超額。

鋼鐵行業是所有行業中碳排放量最高的行業之一,因此實現鋼鐵行業的淨零目標是重中之重。該報告顯示,在全球碳排放量中,鋼鐵行業的碳排放量達到9%。《全球效率情報》(Global Efficiency Intelligence) 也表示,鋼鐵行業的二氧化碳排放量占全球的11%。

聯合國清潔能源部長級會議最近針對《工業深度脫碳倡議》頒佈了多項計畫,旨在2050年前制定全球煤炭脫碳戰略。

報告指出,SSAB和Arcelor Mittal過渡準備充分,而Severstal、瑞士Metinvest和Erdemir鋼鐵公司的過渡準備最不充分。

據《行業追蹤》報告,SSAB制定了雄心勃勃的碳中和目標。這家瑞典公司計畫在2045年前實現碳中和目標,並表示將在2032年前將碳排放量減少35%,其目前的碳排放量占瑞典總碳排放的10%。

此外,Arcelor Mittal、Voestalpine、Tata Steel和Salzgitter承諾在2050年前實現碳中和目標。但該報告表示,這些公司在2030年之後才能實現大多數減排目標(碳中和目標的一部分),因此公司很可能錯失投資新技術的機會,而這些新技術是實現這些碳中和目標所必需的。

分析表明,SSAB、Arcelor Mittal和Tata Steel等歐洲鋼鐵公司已開始改進低碳技術,降低公司的碳足跡。其中包括氫基煉鋼及碳捕獲、利用與封存。氫基煉鋼能將碳排放減少至接近淨零,而碳捕獲、利用與封存有助於降低傳統煉鋼形式產生的排放量。

報告指出,在十大公司中,七家公司正在開發綠色產氫工藝,建立供應鏈,以獲取大量新技術所需的氫氣。然而,目前產氫工藝尚處於開發早期階段,資金尚未到位,因此,無法支持過渡轉型,但是也有可能會衍生出新的籌資方法,包括由子公司提供資金支援、公共資助和投資資本。

煉鋼過程中碳排放的最大貢獻因數為十四世紀以來一直使用的高爐。報告稱,只有更換掉這種煉鋼方法才能減少足夠數量的碳排放,進而實現歐盟2050年的淨零目標。報告還指出,過去二十年裡,透過提高效率實現減排的做法已進入平穩期,在此時間該報告中分析的幾家公司每年實現1%的減排目標。

高爐的使用年限為15年至20年,實現更新換代可能需要投入大量資金,因此,報告建議,如果鋼鐵公司主要採用碳密集型生產方法,則需要投資新技術向清潔生產邁進,在2030年前更換完高爐之後才有機會實現淨零目標。

 

相關文章
歐盟CBAM 邊境碳稅2023年即將適用,你準備好了嗎?

 

本篇文章是由TÜV萊因氣候行動計劃微信公眾號編輯轉載。

來源: Environment+Energy LEADER, David Worford, European Steel Industry in Danger of Surpassing Carbon Budget, Missing Net Zero Goals

德國萊因TÜV大中華區與烏拉圭技術標準協會UNIT成為合作夥伴

德國萊因TÜV大中華區與烏拉圭技術標準協會UNIT簽署互認協定。UNIT不僅是烏拉圭電氣產品低電壓安全法規的發證機構,也是能效法規的發證機構。基於該互認協議,烏拉圭UNIT可以認可德國萊因TÜV大中華區發出的安規,能效及工廠檢查報告簽發烏拉圭相應證書。

烏拉圭位於南美洲東南部,官方語言為西班牙語。烏拉圭的電氣產品低電壓安全法規包含插頭插座,電線,斷路器,插頭轉換器等;家用冰箱,空調等產品則在能效法規的強制認證清單中,以上產品均在互認協定範圍。

除烏拉圭外,德國萊因TÜV擁有巴西,阿根廷,厄瓜多,智利等眾多國家的發證資質,可以為客戶提供全面的服務。如有諮詢,請聯繫我們。

【快訊】德國萊因TÜV UK取得英國UKAS“無線電設備、機械供應(安全) 、 電磁相容性、壓力設備(安全) 與玩具(安全)”五大法規的認可機構發證資格

德國萊因TÜV UK (2571)取得英國UKAS“無線電設備、機械供應(安全) 、 電磁相容性、壓力設備(安全) 與玩具(安全)”五大法規的認可機構發證資格。

• 2017年 無線電設備條例 (Radio Equipment Regulations 2017)

• 2008年 機械供應(安全)條例 (Supply of Machinery (Safety) Regulations 2008)

• 2016年 電磁相容性法規 (Electromagnetic Compatibility Regulations 2016)

• 2016年 壓力設備(安全)條例 (Pressure Equipment (Safety) Regulations 2016)

• 2011年 玩具(安全)條例 (Toys (Safety) Regulations 2011)

UKCA授權資格:

UKCA (UK Conformity Assessed) 標誌自2021年1月1日起生效,是英國脫離歐盟後,針對銷售至英國大不列顛 (英格蘭、威爾士和蘇格蘭) 市場的特定產品所制定的全新英國產品認證標誌,用以取代CE標誌,適用于原本需CE標誌的大多數產品。

英國政府為協助廠商準備與適應新的規範要求,於2023年1月1日前進入英國大不列顛市場的商品,仍可以CE標誌進入大不列顛;自2023年起,強制要求須標示UKCA標誌。

如何做好進入英國市場的準備,請就近聯繫德國萊因TÜV大中華區的專家,讓我們為您提供一站式當地語系化服務的完整英國准入方案!

澳洲– 電源供應器及電池充電器產品資訊公告

澳洲EESS (電子設備安全體系) 於近日發佈新的資訊公告(21-030),針對電源供應器及電池充電器給出了具體的定義與相關標準說明以及認證要求,並於2021 年 6 月 15 日起生效,過渡期一年,至2022 年 6 月 15 日止。 以下是六個主要的產品類別:

1. 一般用途電源供應器

  • 相關安全標準為 AS/NZS 61558.2.6,開關電源為 AS/NZS 61558.2.16
  • 證書及使用說明書不需要指定與電源供應器一起使用的任何特定品牌或設備類型

 

2. 配備特定 Class III 設備的電源供應器

  • 相關安全標準為電器的相關AS/NZS 60335 系列標準 (電源供應器與Class III設備需針對AS/NZS 60335.1 及相關第2 部分一起測試)
  • 證書及使用說明書上需指定與電源供應器一起使用的設備品牌和類型

 

3. 隨特定 (ITE、音訊、視頻) 電子設備提供的電源供應器

  • 相關安全標準為 AS/NZS 60065 或 AS/NZS 60950.1 (兩者將於2022年2月15日被AS/NZS 62368.1取代)
  • 證書及使用說明書上需指定與電源供應器一起使用的設備品牌和類型

 

4. 隨照明設備提供/用於照明設備的電源供應器

相關安全標準:

a.電子類型:

  • 發光半導體驅動器: AS/NZS 61347.2.13
  • 其他: AS / NZS 61347.2.2

b. 鐵磁類型:

  • AS / NZS 61558.2.6

證書及使用說明書上需指定與電源供應器一起使用的類型 (如與其他設備一起出售,則該設備的品牌也須一起提供)

 

5. 電池充電器

  • 相關安全標準為 AS/NZS 60335.2.29
  • 證書及使用說明書上需指定由電池充電器充電的電池類型

 

6. 配備特定電子 (ITE、音訊、視頻) 設備的電池充電器

  • 相關安全標準為 AS/NZS 62368.1 或 AS/NZS 60335.2.29
  • 如果使用 AS/NZS 62368.1,則證書及使用說明書需指定要使用電池充電器的設備品牌和類型

 

以下條件適用於過渡協議:

1. 對於變更申請,都將在 2022 年 6 月 15 日起執行此要求 (此日期前為過渡期),涉及添加新型號的除外。

2. 如果在公告發佈日之前已簽發的測試報告 (2021年6月15日之前簽發的報告),也可以適用過渡期安排。 因此,對於在 2021 年 6 月 15 日之前簽發測試報告的新申請和更新申請,並不會按此要求執行。

德國萊因TÜV致力於幫助客戶的產品順利進入全球市場提供一站式的測試認證服務,我們將為你持續關注澳洲各州以及紐西蘭的最新資訊發佈以及市場動態更新,以提供及時有效的認證服務。 如果您有任何疑問,請與TÜV萊因公司全球市場准入服務專家聯繫。

2021年9月國際市場准入資訊更新

資訊 / 電信 ITE / Telecom

Brazil 巴西

7月30日,ANATEL發佈了與ANATEL品牌符合性聲明 (DoC) 指南相關的第5205號法案。 DoC 程序類似常規認證模式,但申請人 (當地代表) 可以直接向 ANATEL 申請該程序,而無需使用一個 OCD (OCD 在此模式下是可選的)。

帶有 ANATEL 品牌的 DoC 僅適用於法案 7280 規定的幾種類型的設備,例如:光纖連接器、同軸電纜連接器、xDSL 濾波器 – 開關分路器、空中光纖終端盒、地下光纖終端盒、住宅社區與小型商業建築的地下光纖終端盒等。

本程式沒有證書更新,即證書終身有效。

ANATEL – Act nº 5205 – Declaration of Conformity with ANATEL Brand

On July 30, ANATEL published the Act 5205 related to guideline of Declaration of Conformity (DoC) with ANATEL Brand (see English version annex). The DoC procedure looks pretty much like the regular certification mode, but the applicant (local rep) can apply the procedure directly with ANATEL without requiring the use of one OCD (OCD is optional in this mode).

The requirements are basically the same (representative letter, manual, internal and external pictures, Factory ISO and testing report (overseas ILAC testing report is acceptable) and the CoC will be replaced by a DoC declaration. Applicant will submit the files to ANATEL.

The DoC with ANATEL Brand is applicable only for a few types of equipment according to Act 7280, such as: Fiber Optic Connector, Connector for Coaxial Cable, xDSL Filter – Switch Splitter, Aerial Optical Terminal Box, Underground Optical Terminal Box, Underground Optical Terminal Box for Residential Areas and Small Commercial Buildings, etc.

This procedure does not have certificate renewal, i.e., the certificate is valid for lifetime.

Below is the Act 5205 official link:

https://informacoes.anatel.gov.br/legislacao/atos-de-certificacao-de-produtos/2021/1573-ato-5205

 

Brazil 巴西

6月21日,巴西國家電信管理局 (ANATEL) 發佈了第 4521 號法案《進口電信產品操作程式》。

以下是對這項重要的新法案的總結:

1. 第 4521 號法案強制要求在進口過程之前頒發認證證書 (CoH)

2. 電信/射頻產品的進口必須由認證證書 (CoH) 的申請人或 CoH 申請人授權的進口商完成

3. 電信/射頻產品進口前,必須有ANATEL標籤

4. 對於樣品將運往巴西進行測試 (為了獲得 ANATEL 批准) 的情況,海關可能會要求進口商與巴西認證機構 (OCD) 或實驗室之間簽訂合約

5. 對於打算運往巴西進行展示或其他特定條件 (非商業化或自用) 的設備,進口商必須從 ANATEL 獲得臨時許可證

ANATEL publishes Act 4521 Operating Procedure for Importing Telecommunication Products

On June 21, the authority Agência Nacional de Telecomunicações (ANATEL) in Brazil published the Act 4521 Operating Procedure for Importing Telecommunication Products.

Here is a summary on this important new Act which reaffirms some things that we already knew but now in formal writing:

1. Act 4521 ratifies mandatory to have the Certificate of Homologation (CoH) issued prior to the importation process.

2. The importation of telecommunication/RF products must be done by the applicant of the Certificate of Homologation (CoH) or by an importer authorized by the applicant of the CoH.

3. Before the telecommunication/RF product is imported, it must have the ANATEL label (except for some situations like batteries/power supplies used with cell phones, where the regulatory label is bought locally and it is OK to apply the label after the units arrive in the country).

4. For the situations where samples will be shipped to Brazil for testing purposes (in order to obtain ANATEL approval), customs may require a contract between the importer and the Brazil Certification Body (OCD) or Lab. We have not seen customs asking for this for any of our shipments, but if this happens we can provide the quote from some Certification Bodies in Brazil (OCD) that we usually cooperate with and also provide the proper explanations.

5. For devices meant to be shipped to Brazil for demonstration or other specific conditions (not commercialization or own use), the importer must to obtain a temporary license from ANATEL.

In summary, nothing really changes in our day-to-day routine, we can continue shipping samples through Courier (DHL, FEDEX, UPS). We just need to keep paying attention to the Courier Rules enforced by customs in Brazil in order to avoid getting a Yellow or Red light at customs.

 

Israel 以色列

2021 年 6 月 27 日,以色列通信部 (MoC) 宣佈計畫在 2025 年底前關閉 2G 和 3G 網路。

計畫時程如下:

• 第 1 階段 – 2022 年 1 月 1 日:禁止商業進口僅支持 2G 和 3G 技術的移動設備。

• 第 2 階段 – 2023 年 1 月 1 日:停止將新移動設備連接到僅支援 2G 和 3G 技術的網路。 在網路關閉之前,運營商將需要向現有使用者提供 2G 和 3G 服務。

• 第 3 階段 – 2025 年 12 月 31 日:關閉 2G 和 3G 網路。

MoC will Shut Down 2G&3G Networks by 2025

On June 27, 2021, the Ministry of Communications (MoC) of Israel announced their plans to shut down 2G and 3G networks by the end of 2025.

The timeline is as follows:

  • Stage 1 – January 1, 2022: Prohibition of the commercial importation of mobile devices that support only 2G and 3G technologies.
  • Stage 2 – January 1, 2023: Ceasing the connection of new mobile devices to the networks that support only 2G and 3G technologies. Operators will be required to provide 2G and 3G service to existing subscribers up to the time that the networks will shut down.
  • Stage 3 – December 31, 2025: Shutdown of 2G and 3G networks.

 

Malaysia 馬來西亞

SIRIM QAS發佈了MCMC MTSFB TC T014: 2017和MCMC MTSFB TC T013: 2019,分別規定了數碼地面電視 (DTT) 使用的有源室內天線和涉及互聯網第6版 (IPv6) 產品的符合性認證要求。

SIRIM QAS international has implemented the certification for Active Indoor Antenna for Digital Terrestrial Television (DTT) and Internet Protocol Version 6 (IPv6) in according to MCMC MTSFB TC T014:2017 and MCMC MTSFB TC T013:2019 respectively.

Therefore, the importation of the above products into the country shall subject to compliance approval or special approval.

With the above requirements, please be informed that the IT/Networking Module in eComM has been updated with a new module as to ensure application for IT/Networking are fulfils with the new requirements.

Effective 1st August 2021 , Application for IT/Networking shall be processed as follows :

 

Application Criteria

>New Requirement

IT/ Networking application submitted before 1st Aug 2021 (Use Old IT/Networking Module)

a) Approved application will be issued with a validity period until 31st July 2021.

b) Certificate of Approval (CoA) application is allowed until 31st July 2021, however application submitted after 31st July 2021 will be rejected by the system.

IT/ Networking application submitted from 1st August 2021 and onwards (Use New IT/Networking Module)

a) Approved application will be issued with a validity period of one (1) year from the date of File Number is generated.

b) Certificate of Approval (CoA) application is allowed within the validity period, however application submitted after end of validity period will be rejected by the system

 

Samoa 薩摩亞

2021 年 6 月 23 日,薩摩亞監管機構管理局 (OOTR) 發佈了“監管機構令第 2021/T02 號”。

在此公告中,製造商和進口商必須在收到型式批准證書後用薩摩亞合規標誌標記電信設備:

  • 商標將在包裝、保修單、說明手冊和傳單、網站和設備或設備上突出顯示
  • 當產品具有內置顯示器時,建議使用電子標籤
  • 高度必須為 3 毫米

OOTR New Labeling Requirements for Telecommunication Equipment

On 23rd June 2021, the authority Office of the Regulator (OOTR) in Samoa published the “Order of the Regulator No. 2021/T02″.

With this announcement manufacturers and importers are required to label telecommunications equipment with the Samoa compliance mark upon receiving a Type Approval Certificate:

  • The trademark will be highlighted on packaging, warranty forms, instruction manual and leaflets, websites and equipment or devices.
  • Electronic labeling is recommended when the product has a built-in display.
  • Must be of 3mm height

 

Saudi Arabia 沙烏地阿拉伯

沙烏地阿拉伯通信和訊息技術委員會 (CITC) 發佈技術規範,適用於使用GSM,UMTS,LTE,LTE-M NB-IOT和5G NR技術的IMT使用者設備,手機和相關設備。該技術規範於2021年7月20日生效。

IMT User Equipment, Technical Specification RI120

The Saudi Arabia Communications and Information Technology Commission (CITC) issued this technical specification which applies to IMT user equipment, handsets and related equipment that uses GSM, UMTS, LTE, LTE-M NB-IoT, and 5G NR technologies.

General Requirements

  • All equipment must comply with the requirement of CITC specification GEN001, be safe and must not adversely affect other electrical equipment.
  • All telecommunications and radio terminal equipment must comply with the relevant technical specifications established by CITC. In addition, such equipment may be subject to regulations for Declaration of Conformity or registration. Additional details are available at www.citc.gov.sa.
  • If more than one interface type is offered by a piece of equipment, each interface must meet the applicable technical specifications.
  • Further information on the characteristics and presentation of network interfaces can be obtained by coordinating with the mobile network operators.
  • It is mandatory that test reports are obtained from a laboratory that has been accredited by a body that is a member of the ILAC Mutual Recognition Arrangement.

This technical specification entered into force on 20 July 2021. Document RI056 Specification for UMTS (3G) and LTE (4G) Handsets and Mobile Equipment has been merged into this IMT User Equipment technical specification

 

South Korea 韓國

2021 年 8 月 10 日,韓國貿易、工業和能源部 (MOTIE) 發佈能效標籤和標準法規的修正案草案: 2021-601,主要從需要降低待機功率的產品中刪除電腦和顯示器,上述產品將被指定為效率管理產品並進行管理。有意者可於 2021 年 8 月 31 日前提交意見。

South Korea: Regulation on Energy Efficiency Labeling and Standards, MKE Notice No. 1992-71 – Proposed Amendment – (on designation of computers and monitors as products subject to efficiency management) Draft Notice No. 2021-601

On 10 August 2021, the South Korean Ministry of Trade, Industry and Energy (MOTIE) issued a draft amendment to the Regulation on Energy Efficiency Labelling and Standards.

The draft was issued to change computers and monitors from Products Subject to Reduction of Standby Power to Subject to Efficiency Management, since power consumption management with regard to the operation mode for the products is required.

Applicable computer products include desktop computers, desktop computers with integrated monitor, and notebook computers. Within the scope are also the monitors with a diagonal screen length of 153 cm or less for the visible screen. Details on the applicable products and measurement methods, including the calculating formula of MEPS, are provided in Annex 1.

Computers must bear labels indicating compliance with MEPS, and monitors must indicate On-mode power consumption and compliance with MEPS. Labels may be attached to the front or side or back of the computers, and the front or back of the monitors.

According to the amendment, printers would be regulated as efficiency management products in 2026, while the energy efficiency of faxes would be managed in 2030.
Interested parties may submit their comments to ssongcle@korea.kr, hwsayu@korea.kr before 31 August, 2021.

 

家用電器 House Appliances

Brazil 巴西

2021年8月2日,巴西國家計量研究所,標準化和工業品質(INMETRO / CONEDRO)採用第332號協定,批准冰箱和類似設備的合格評估要求。 該協議將於2021年9月1日生效,並將廢除第577/2015號協議。

Approving Conformity Assessment Requirements for Refrigerators and Similar Appliances, Portaria No. 332, 2021

On 2 August 2021, the Brazil National Institute of Metrology, Standardisation and Industrial Quality (INMETRO/CONMETRO) adopted Portaria No. 332 approving the conformity assessment requirements for refrigerators and similar appliances.

The Portaria applies to refrigerators and similar appliances with a compression system and thermoelectric, with blind door, including minibars, refrigerators, refrigerators and freezers, freezers and conservators, with one or more doors, with manual defrost (cycle defrost), automatic (frost-free) or semi-automatic, powered by electric network at 127 V or 220 V, 60 Hz.

It does not apply to:

  • commercial freezers and conservators with glass door and glass lid and blind door;
  • refrigerators and similar appliances with glass doors;
  • refrigerators and similar appliances with absorption and solar system.

Refrigerators and similar appliances for commercial and industrial use must be marked on the packaging and product with the words “Commercial” or “Industrial”.
This Portaria will enter into force on 1 September 2021 and will repeal Portaria No. 577/2015.

 

Brazil 巴西

NMETRO 更新並重新發佈了風扇和空氣循環機合格評定和標籤的技術安全和能效要求,這些要求適用於壁掛式和立式電風扇和空氣循環機或類似的家用家用電器。 該協議 於 2021 年 8 月 2 日生效。

INMETRO has updated and reissued the technical safety and energy efficiency requirements for conformity assessment and labelling of fans and air circulators. The requirements apply to wall-mounted and table pedestal electrical fans and air circulators or similar appliances marketed for domestic use.

Fans and air circulators may only be imported and, or placed on the national market if their conformity has been certified in accordance with the technical requirements.  After certification, the products shall be registered with INMETRO in order to receive approval to use the Compliance Identification Mark.  The products shall be supplied with instruction manuals. The Conformity Identification Mark shall be affixed to the appliance and the National Energy Conservation Label (ENCE) shall be displayed in a clearly visible manner at the point of sale.

This Portaria came into force on August 2, 2021.

 

燈具 / LED Luminaiaries/LED

South Korea 韓國

2021年8月11日,國家技術標準研究院發佈公告第2021-0232號,據《電器及家用電器安全管理法》第五條第 (三) 項和第十五條第 (三) 項規定的電器安全標準,現修改公佈如下。

目的: 電器安全標準術語的變更/刪除

主要內容:

1) 目標電器安全標準

– K 10021:直管型 LED 燈(轉換器外置型)燈具安全要求

– KC 60400 : 螢光燈支架和啟動器支架

– KC 60598-2-1: 固定燈具的特殊要求

– KC 60598-2-2: 嵌入式燈具的特殊要求

– KC 60598-2-4: 可擕式燈具的特殊要求

– KC 605982-5: 泛光燈的個別要求

– KC 60598-2-8: 手電筒的個別要求

– KC 60598-2-20: 煉式燈具的個別要求

2) 主要頒佈和修訂

ㅇ (K 10021) 性能要求 ( K 62384) 刪除

ㅇ (KC 60400) 術語變更(燈接觸→ 燈連接器

ㅇ(KC 60598-2 部分) 將參考標準從KS 標準更改為KC 安全標準

Revision notice of electrical appliance safety standards (8 types)

National Institute of Technology and Standards Notice No. 2021-0232

The electrical appliance safety standards in accordance with Article 5 (3) and 15 (3) of the “Electrical Appliances and Household Appliances Safety Management Act” are revised and announced as follows.

Purpose: Change/deletion of terms and phrases of safety standards for electrical appliances.

Main contents:

1) Target electrical appliance safety standards

– K 10021: Safety requirements for luminaires for straight-pipe LED lamps (converter external type)

– KC 60400: Fluorescent lamps Holder and starter holder

– KC 60598-2-1: Particular requirements for fixed luminaires

– KC 60598-2-2: Particular requirements for recessed luminaires

– KC 60598-2-4: Particular requirements for portable luminaires

– KC 60598-2-5: Individual requirements for floodlights

– KC 60598-2-8: Individual requirements for handlamps

– KC 60598-2-20: Individual requirements for lighting chains

2) Major enactments and revisions

ㅇ (K 10021) Performance requirement (K 62384) deleted

ㅇ (KC 60400) Terminology change (Lamp contact → Lamp connector)

ㅇ (KC 60598-2 part) Changed reference standard from KS standard to KC safety standard

 

能源效率要求 Energy Efficiency Requirements

Mexico 墨西哥

2021 年 7 月 21 日,墨西哥國家能效委員會 (CONUEE) 發佈了關於電動機能效要求的標準 NOM-033-ENER-2019。 該標準規定了能效的最低值、測試方法、銘牌標記以及對風冷(交流)電動機的評估流程。本標準適用於進口到墨西哥境內、在墨西哥境內製造或銷售的上述電機產品。產品只有在認可實驗室進行並通過測試,墨西哥能效委員才會簽發符合性證書。本標準自2021年11月18日起施行。

Energy Efficiency Requirements for Air-Cooled AC Electric Motors with a Nominal Power of 1 W to 180 W, Standard NOM-033-ENER-2019

On 21 July 2021, the Mexican National Commission for Energy Efficiency (CONUEE) published Standard NOM-033-ENER-2019 on energy efficiency requirements of electric motors.

The standard establishes the minimum values ​​of energy efficiency, the test method, the marking and the procedure to assess conformity of air-cooled alternating current (AC) electric motors, with nominal electrical voltage up to 240 V, nominal power equal or greater than 1 W and less than 180 W; 2, 4 and 6 pole, squirrel cage induction; as well as those that are electronically switched, which are imported, manufactured or marketed within the national territory.

Products will only receive a certificate of conformity once they have met testing requirements from an accredited testing laboratory.

This Standard will come into force on 18 November 2021.

 

Singapore 新加坡

新加坡國家環境局 (NEA) 於 2021 年 6 月 8 日通知修訂最低能效標準 (MEPS) 以及四種電器類型的強制性能源標籤計畫 (MELS):

• 冰箱

• 乾衣機

• 平開和窗式空調

• 分離式空調

新的 MEPS 要求將從 2022 年 1 月 1 日起生效。

Singapore Revises Minimum Energy Performance Standards for Some Categories of Products

The National Environment Agency’s (NEA) of Singapore informed on the revision of Minimum Energy Performance Standards (MEPS) as well as The Mandatory Energy Labelling Scheme (MELS) for four appliance types on June 8, 2021. The NEA has risen the energy efficiency requirements to:

  • Refrigerators
  • Clothes dryers
  • Casement and window air-conditioners
  • Split-type air-conditioners

It was done to help household appliances become more energy efficient that allows for reducing energy consumption and carbon emissions in the household sector.
The new MEPS requirements will become effective from January 1, 2022.

 

South Korea 韓國

2021 年 8 月 6 日,韓國貿易、工業和能源部 (MOTIE) 發佈了能效標籤和標準法規的修正案草案,預計改變洗衣機、泡菜冰箱和電冷暖氣設備的能效標準。一旦獲批,泡菜冰箱和洗衣機能效標準的修改將於2022年7月1日生效;電空調/加熱器能效標準的擬議修改將於2022年10月1日生效。

South Korea to change energy efficiency standards for washing machines, Kimchi refrigerators and electric cooling and heating equipment

On 6 August 2021, the South Korean Ministry of Trade, Industry and Energy (MOTIE) issued a draft amendment to the Regulation on Energy Efficiency Labelling and Standards, also known as the South Korean Standby Regulation or Energy Efficiency Management of Operational Equipment Regulation.

The draft amendment proposes to raise the energy efficiency standards of certain equipment subject to efficiency management and to establish mid-long term target consumption efficiency for those products.

The key changes of the draft include:

Kimchi refrigerators:

oincrease in efficiency grade and MEPS;

oaddition of energy efficiency target for years of 2025 and 2028 by products type;

Washing machines:

oimprovement of efficiency grade and MEPS;

oaddition of energy efficiency target for years of 2025 and 2028 by general washing machines and drum washing machines;

ochanges items to be indicated on the energy grade label from “power consumption per kg” to “power consumption for one washing”, and from “water consumption per 1 kg of washing” to “water consumption per washing”;

Electric air conditioners/heaters:

oincrease in efficiency grade and MEPS;

oaddition of energy efficiency target for years of 2025 and 2028 by products type;

oseparate indication of cooling and heating efficiency on energy grade label etc.

The proposal relaxes existing labelling requirements to allow certain items such as electric refrigerators and kimchi refrigerators to bear the efficiency rating label on the side of the product (and not on the front of the apparatus as currently required).

Once approved, the changes made to the energy efficiency standards for kimchi refrigerators and washing machines will become effective on July 1, 2022. The proposed amendments to energy efficiency standards for electric air conditioners/heaters are scheduled to enter into force on October 1, 2022.

Interested parties have to submit their comments until 27 August 2021 to the following email address: ssongcle@korea.kr

 

其他 / 多主題產品 Others / Products with Multiple Subjects

Brazil 巴西

2021年7月16日,巴西國家計量研究所,標準化和工業品質(InMETRO / CONEDRO)發佈了第310號協定,批准聲音設備和類似產品的技術規則。該協議於2021年8月2日生效。

Approving Technical Regulation on Sound Power of Sound Equipment and Similar, Portaria No. 310, 2021

On 16 July 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 310 which approves the Technical Regulation on Sound Power of Sound Equipment and Similar.

This Portaria applies to sound equipment and similar which have information on sound power.

According to Article 4, the sound power of stereos and similar devices available on the domestic market must be expressed in watts RMS (Root Mean Square). It is prohibited to provide sound power information in watts PMPO (Peak Music Power Output) or any other form.

Suppliers of these products must comply with the determinations of this Portaria and will be subject to market surveillance actions carried out by the competent authority. Thus, as per Article 7, when requested, they shall provide the required information within a maximum period of 15 days.

This Portaria entered into force on 2 August 2021.

 

EAEU 歐亞經濟聯盟

EAEU批准燃燒氣體燃料的家電安全自願標準清單: 2021年第86號決定。

2021年7月13日,歐亞經濟委員會(EEC)發佈了第86號決定,批准了最新的自願性國際和區域標準,並在缺乏國家標準時,可用於證明合規的燃燒氣體燃料的器具的安全規定(ТRCU 016/2011)。該決定計劃於2022年1月12日生效。

EAEU: Approving the List of Voluntary Standards on Safety of Appliances Burning Gaseous Fuels, Decision No. 86, 2021

On 13 July 2021, the Eurasian Economic Commission (EEC) issued Decision No. 86, 2021 approving the updated list of voluntary international and regional (interstate) standards, and in their absence national (state) standards, which may be used to demonstrate compliance with the requirements of the Technical Regulations on the

Safety of Appliances Burning Gaseous Fuels (ТR CU 016/2011), as approved by Decision No. 875, 2011.

These standards, which for most of them are based on regional standards (EN), establish uniform principles and testing methods for assessing the conformity of appliances and devices burning gaseous fuels. The standards apply to a number of appliances and fittings including among others:

  • Household gas heating appliances;
  • Household gas cooking appliances;
  • Portable and camping gas cookers, household gas lamps;
  • Gas stoves and gas cylinders;
  • Industrial gas burners for special purposes;
  • Infrared gas burners and gas burners for household appliances.

The list of approved standards includes 125 standards, including 65 interstate standards, 14 state standards of the Republic of Belarus, 1 national standard of the Republic of Kazakhstan, as well as 45 national standards of the Russian Federation. The list of standards containing methods of research (tests) and measurements consists of 122 standards, including 63 interstate standards, 15 state standards of the Republic of Belarus and 44 national standards of the Russian Federation.

This Decision is scheduled to enter into force on 12 January 2022.

 

India 印度

延展光伏逆變器以自我宣告進入印度的期限到2021年12月31日。

MNRE again extended the self-certification for SPV inverters from 30/06/2021 to 31/12/2021 and SPV inverters can be imported based on valid IEC certificates.
For further details, please refer to the attachment.

 

Peru 秘鲁

2021 年 7 月 9 日,秘魯技術標準機構 INACAL 通過第 014-2021-INACAL/DN 號決議批准了關於燈具、家用電器、彈性層壓容器和其他事項的修訂技術標準清單。根據秘魯法律,該決議於 2021 年 7 月 10 日公佈後的第二天生效。

On 09 July 2021, the Peruvian technical standards body INACAL through Resolution No. 014-2021-INACAL/DN approved a list of revised technical standards on luminaries, household electrical appliances, flexible laminated containers and other matters.

The Resolution entered into force the day following publication, 10 July 2021, according to the rule of Peruvian law.

 

Peru 秘鲁

2021年7月26日,秘魯技術標準機構INACAL通過第017-2021-INACAL / DN決議批准了關於真空吸塵器和吸水清潔設備、複合式分離式空調和空氣對空氣熱泵、電氣裝置的開關等的修訂技術標準清單。根據秘魯法律,該決議於 2021 年 7 月 27 日公佈後的第二天生效。

On 26 July 2021, the Peruvian technical standards body INACAL through Resolution No. 017-2021-INACAL/DN approved a list of revised technical standards on vacuum cleaners and water-suction cleaning appliances, multiple split-system air conditioners and air-to-air heat pumps, switches for electrical installations and others.

The Resolution entered into force the day following publication, 27 July 2021, according to the rule of Peruvian law.

 

Saudi Arabia 沙烏地阿拉伯

沙特標準、計量和品質組織 (SASO) 在其官方網站上發佈了最新更新,將原本預計在2021年9月1日實施的SASO IECEE 認可證書 (簡稱SIRC證書) 第二階段新增產品推遲至 2021 年 11月 1 日。

SASO issued a new date for the IECEE Recognition Certificate for Stage 2 products

The Saudi Standards, Metrology and Quality Organization (SASO) published a recent update on their official website changing the date of obtaining the mandatory IECEE national recognition certificate for Stage 2 products to 1 November 2021.

Stage 2 products:

Product

Testing standard

Shavers

IEC-60335-2-8

Desktop computers

IEC 62368-1

Circuit breakers

AC Circuit breakers :
IEC60898-1

AC/DC Circuit breakers :
IEC 60898-2

DC circuit Breakers :
IEC 60898-3

Main Current circuit breaker

IEC 60947-2

Mobile charging cables

IEC 62368-1

 

 

Saudi Arabia 沙烏地阿拉伯

2021 年 8 月 5 日,沙特標準、計量和品質組織 (SASO) 通知 WTO,將從 2021 年 11 月 1 日起擴大 IECEx 計畫內的電氣設備範圍。對本 WTO 通知發表意見的最終日期是 2021 年 10 月 4 日,即通知發出之日起 60 天。

SASO Notifies the WTO of expanding the electrical equipment coverage within the IECEx scheme

On 5 August 2021, the Saudi Standards, Metrology and Quality Organization (SASO) notified the WTO of expanding the electrical equipment coverage within the IECex scheme to include the following products to be used in explosive atmospheres from 1 November 2021:

  • Junction Box
  • Control Box
  • Linear lighting
  • Plugs and Sockets
  • Pumps
  • Gas Detectors and Gas Detection Systems

The final date for comments on this WTO notification is 4 October 2021, 60 days from the date of the notification.

 

Singapore 新加坡

新加坡CPSO發佈 CPSO-120721-00通告,關於受《消費者保護 (安全要求) 條例》(“CPSR”) 監管的高風險受控商品安全標準的變化。CPSO 通知,為了根據 CPSR 進行測試和認證註冊,高風險受控貨物所需的安全標準將更新,自 2022 年 7 月 13 日起生效。

Update to High-Risk Controlled Goods Test Standards

This circular is to inform Registered Suppliers and Conformity Assessment Bodies on the changes in safety standards for the high-risk Controlled Goods, regulated under the Consumer Protection (Safety Requirements) Regulations (‘CPSR’).

1. Under the CPSR, 33 categories of household electrical, electronics and gas appliances and accessories are classified as Controlled Goods. Controlled Goods are required to be tested and certified to specified safety standards, registered with the Consumer Product Safety Office1 (‘CPSO’), and affixed with the Safety Mark before they can be supplied in Singapore. More information about the CPSR is available at:

https://www.consumerproductsafety.gov.sg/suppliers/cpsr/overview-of-cpsr

https://www.consumerproductsafety.gov.sg/files/cps-info-booklet.pdf

2. The CPSO wishes to inform you that, for the purpose of testing and certification for registration under the CPSR, the required safety standards for the high-risk Controlled Goods will be updated as set out with effect from 13th July 2022:

 

S/N

Category of Controlled Goods

Minimum Edition of Safety Standard

1.

Gas cooking appliances (gas cooker)

EN 30-1-1:2008 + A3:2013 or AS 5263.1.1:2020

Gas cooking appliances (glass-ceramic gas hob with enclosed covered burner)

EN 30-1-3:2003 + A1:2006

Gas cooking appliances (gas cooker with automatic burner control system)

IEC 60335-2-102:2017

2.

Mains socket-outlets (3-pin 13-amp type)

SS 145-2:2018

Mains socket-outlets (3-pin 13-amp type for cooker control unit)

BS 4177:1992 + A1:1993 + A2:1997 + A3:2004 + A4:2007

Mains socket-outlets (3-pin 13-amp type with RCD)

BS 7288:2016

Mains socket-outlets (3-pin round type 15-amp)

SS 472:1999 + A1:2020

3.

Water heaters (instantaneous electric type)

IEC 60335-2-35:2012 + A1:2016 + A2:2020

Water heaters (mains pressure electric storage type)

IEC 60335-2-21:2012 + A1:2018

4.

Refrigerators

IEC 60335-2-24:2020

 

3. RS are to note that from 13th July 2022 (inclusive) onwards, the above Controlled Goods which are tested to editions of their applicable Safety Standards that are older than what is listed above, will not be accepted for new registrations or renewal of existing registrations.

4. CABs that are designated by the CPSO under the CPS scheme can proceed to test/ certify these Controlled Goods with immediate effect if all the following conditions are met:

a. The CAB’s designation is valid, and

b. The CAB is designated to test/ certify the category of Controlled Goods, and

c. The CAB is accredited by the Singapore Accreditation Council (‘SAC’) or other National Accreditation Bodies to test/ certify these Controlled Goods to the updated safety standards

5. Test laboratories that are not designated by the CPSO under the CPS scheme can also test these Controlled Goods with immediate effect if any the following conditions are met:

a. The laboratory is recognized under the IECEE CB scheme to the updated safety standards, or

b. The laboratory is accredited by the SAC or its Mutual Recognition Arrangement partners to test these Controlled Goods to the updated safety standards

TÜV萊因 CEMS 及 DAHS 國際研討會分享國內11座工廠的 CEMS 驗證專案成果

研討會吸引各界專家熱烈參與

TÜV萊因「固定污染源煙氣連續監測系統(CEMS)及數據擷取系統(DAHS)歐盟認證系統研討會」延續第1季「制度篇」與第2季「DAHS QAL 1認證篇」後,於8月19日擴大舉辦實體與線上同步的第3季「CEMS生命週期可靠度管理」國際研討會。會議中特別邀請德國萊因集團德國總部高階主管群及CEMS專家總結歐盟CEMS規範及認證制度發展現況,同時針對國內11座大型固定污染源工廠的CEMS監測效能國際第三方驗證計畫發表成果,進而延伸到CEMS生命週期的可靠度管理,仿效歐盟成功經驗全面提升CEMS/DAHS公信度。此次吸引國內環保領域的產官學研各界專家參與,包括環保署CEMS專家團隊(成功大學)、歐洲在台商務協會、各縣市環境保護局(基隆環保局、新竹環保局、台中環保局)、CEMS專業委辦團隊(捷思環能、康城工程、綠川工程、瑩諮科技)、台灣中油、台電公司、台塑企業四大公司、李長榮化工、聯宙科技、台灣西克麥哈克公司、誠藝科技、文耀興業、合菱科技、進階管理系統整合公司、大震企業、迪卡農台灣分公司等數十位CEMS使用者企業及服務商共襄盛舉,其中開放15位嘉賓出席實體現場研討會。

首先由TÜV萊因工業服務及資訊安全事業群全球執行副總裁 Mr. Peter Lahner 致詞揭開本次研討會序幕,接著由大中華區能源及環保處高鴻鈞總經理致詞,介紹本次研討會目標與各堂議題。

 

德國專家深入解析歐盟CEMS制度

議題1系統由德國萊因TÜV集團環境保護部門負責人 Dr. Peter Wilbring引言,他也以德國工程師協會(VDI)及德國標準化學會(DIN) CEMS工作小組主席身份介紹「TÜV萊因在工業廢氣排放和環境空氣監測領域主導德國和歐洲的標準已有超過50年的經驗,同時TÜV萊因在德國和歐盟扮演著主導地位」。接著議題1主講人德國萊因TÜV集團環境保護部門空氣污染處經理 Mr. Guido Baum介紹歐盟CEMS管制及認證制度深入解析歐盟EN 14181、EN 15267及EN 17255等CEMS相關規範,針對QAL 1、QAL 2、QAL 3及AST完整CEMS生命週期進行詳盡的解析,除了包含與認證系統介紹歐盟的標準和監測儀器測試方法,更進一步分析QAL1認證中CEMS設備(EN 15267)與DAHS系統(EN 17255)實驗室及現場測試內容與流程。

 

CEMS不被信任原因釐清

議題2 由德國萊因TÜV集團能源及環保處全球業務經理 Mr. Wolfgang Spahn引言,希望藉由台灣CEMS驗證專案成果分享,能夠讓台灣的工業、立法機關和業者與TÜV萊因的合作關係更加緊密,同時強化CEMS監測數據品質並據以改善空氣品質。接著由德國萊因大中華區工業服務及資訊安全事業群能源環保處總經理高鴻鈞主講「議題2:國內固定污染源工廠CEMS監測效能國際第三方驗證計畫成果」,開場提到空氣污染議題發生原因錯綜複雜,須利用科學技術分析計算才能準確討論污染排放情形。而部分關心CEMS監測數據真實性的民眾,使用環保署CEMS公開數據(Open Data)針對106年1月至107年9月共21個月的CEMS公開數據分析全台112家公私場所的326根管道的CEMS數據維護情況,引起環境利害關係人包括政府主管機關、操作工廠(公私場所)、民眾、環團及媒體的高度關注,其中台塑企業基於企業社會責任精神,乃仿效歐盟CEMS/DAHS第三方測試認證機制,在環保署及天下雜誌的同意共識下,委託德國TÜV萊因針對11座工廠的16套CEMS執行專業的第三方驗證。

高鴻鈞總經理表示本次驗證專案為釐清社會大眾普遍認為CEMS不被信任6大原因,包含外掛軟體造假、調整參數造假、繞管偷排、乾脆讓數據消失、假裝故障或維修、指稱暫停營運等,由TÜV萊因德國總部CEMS專家主導,並親赴台灣現場與專案檢測團隊(24位成員)共同實施查驗工作,同時邀請環保署專家與天下雜誌代表現場指導,使用十多項專業的驗證測試方法,總計分析超過7百多萬筆CEMS歷史數據,並逐廠進行CEMS設備性能規格功能查驗,彙整超過3,500頁驗證專案報告主文。針對CEMS不被信任的6大原因查驗結果,雖發現有0.05%CEMS缺漏數據及0.046%的不合理註記可歸責操作工廠,但都屬於佔比極低的CEMS維護瑕疵及零星短暫異常,對環境影響程度微乎其微。在不可歸責操作工方面,Open Data 資料缺漏(占比極低)顯示操作工廠已完成DAHS資數據上傳。另外關於工廠與CEMS維護業者錯誤理解(非蓄意)我國法規要求導致數據註記錯等問題,感謝環保署在109年4月CEMS管理辦法修正後已大幅改善此情形。總結所有驗證結果,未發現外掛軟體造假、調整參數造假、繞管偷排、乾脆讓數據消失、假裝故障或維修、指稱暫停營運等情事,且相較於歐洲國家的工廠CEMS維護管理水平來看,本次台塑企業受驗工廠的操作維護及數據可靠性已具相當的穩定程度,並具有自主管理機制及自律文化,與歐洲工廠CEMS管理水準相近。

 

環境利害關係人合作與共贏

TÜV萊因公司德國專家 Peter Wilbring 博士 及 Guido Baum 經理總結分享,在歐洲CEMS監測公信度總是受到關注,所以民眾、環保團體及媒體對CEMS數據的關切或質疑是社會常態,而解決關鍵是必須具備完善的監管法規和方法、業者秉持善良管理人的自主管理作為、獨立公信的專業驗證制度、良性的公民關懷等因素。此次台灣社會對工廠CEMS數據的公信力疑慮及追求真相的事件,是上述所有環境利害關係人共同成長蛻變的必經過程。客觀來說,台塑企業對於社會的質疑勇於面對,委請國際第三方獨立驗證,同時邀請媒體代表與環保署專家隨程督導,呈現出各方的決心及誠懇態度,從國際角度來看是環保爭議事件的一個四方環境利害關係人的良好溝通解決典範及共贏成果,共同建立了正面的環保價值。

CEMS生命週期與國際管理制度接軌

延續上述CEMS驗證計畫成果後,由德國萊因TÜV大中華區工業服務及資訊安全事業群副總裁陳偉康博士引言歡迎與會嘉賓,並由台灣區能源及環保處陳彥宇專案經理主講議題3,分享彙整CEMS查驗經驗與國際管制作為,提出CEMS生命週期管理的四方面精進建議,包含(1)「統一CEMS管理制度」、(2)「CEMS獨立認證制度」、(3)「強化CEMS的源頭品質管控」與(4)「實施CEMS管理稽核」。尤其在CEMS管理制度建立上應納入生命週期的概念,建議台灣CEMS操作工廠在制定CEMS管理制度上能夠參考借鏡國際與歐盟做法,統一企業內部的CEMS 管理制度,並導入CEMS獨立認證系統及合格的國際專業認證機構,以提升CEMS生命週期管理系統的公信力,並採用經過QAL 1認證合格CEMS設備與DAHS系統,強化CEMS的源頭品質管控確保數據品質,同時定期實施CEMS管理稽核來確保管理制度品質有效性,期許未來能與國際CEMS管理制度接軌。

 

建構我國與歐盟CEMS交流平台

在本次研討會最後的問與答環節,現場及線上與會嘉賓提出了非常多問題於研討會上進行交流,尤其在DAHS認證機制與制度上,現場嘉賓【歐洲在台商務協會】蘇冬蘭總監提出歐盟已行之有年的QAL 1認證制度是否可供政府單位在法規制定上參考,及線上與會者提問未來我國DAHS第三方認證機構與機制等問題,進行了熱烈的討論與交流。

另一方面,線上與會者也求教研討會主講人分享本次CEMS驗證專案在技術及管理上的心得,以國際第三方專業機構角度提出國內CEMS管理制度未來精進建議,並期許能對台灣的環境議題的討論產生正面價值。同時在本次驗證計畫過程中,TÜV萊因德國專家團隊與天下雜誌代表及環保署專家頻繁溝通,廣泛交流CEMS法規制度及監管作法的蛻變經驗,奠定台灣與歐盟CEMS水平接軌的良好基礎。在交流過程中,高鴻鈞總經理表示,國內過去鮮少有機會能夠運用這麼大量龐雜工廠運轉製程參數及CEMS監測數據進行大數據分析及交叉比對,所以本計畫成果在CEMS領域上已展現高度的環保價值,作為相關政府單位及台灣企業在法規制定及CEMS維護管理上的參考,並可逐步解除民眾的疑慮達到更良性的公民關懷,共同攜手促進台灣邁向永續發展。

【快訊】英國政府延長產品採用UKCA標誌實施日至2023年1月1日

UKCA (UK Conformity Assessed) 標誌自2021年1月1日起生效,是英國脫離歐盟後,針對銷售至英國大不列顛 (英格蘭、威爾士和蘇格蘭) 市場的特定產品所制定的全新英國產品認證標誌,用以取代CE標誌,適用於原本需CE標誌的大多數產品。

英國政府為協助廠商準備與適應新的規範要求,將原定2021年12月31日延至2023年1月1日前進入英國大不列顛市場的商品,仍可以CE標誌進入大不列顛;而製造醫療器材的公司全採用新認證的期限更延至2023年7月1日。換句話說,2023年時,在英國市場上投放商品時必須使用 UKCA 標誌。

欲查閱英國政府官方資訊, 請點擊以下連結:https://www.gov.uk/guidance/using-the-ukca-marking

溫故而知新! 我還想多瞭解UKCA標誌>> 點擊查看
想諮詢德國萊因TÜV提供的UKCA服務>>點擊查看

如何做好進入英國市場的準備,請就近聯繫德國萊因TÜV大中華區的專家,讓我們為您提供完整的英國准入方案!

【快訊】韓國KC 62368-1正式實施!

KATS今日正式公告開始實施KC 62368-1,官網連結及相關公告請見以下連結:

https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=&cid=22576

主要說明如下:

  1. 根據目前發布的KC 62368-1標準內容,韓國只接受IEC 62368第三版 (IEC 62368-1:2018)。
  2. KC 60065, K 60950-1, K 60950-22有一年多的過渡期,直至2022.12.31廢止。

德國萊因TÜV大中華區可以提供韓國KC標誌的相關測試與發證服務,有任何關於韓國認證的問題,歡迎撥打服務熱線+886-2-2172-1001與我們聯繫!

歐盟CBAM 邊境碳稅2023年即將適用,你準備好了嗎?

CBAM: 減緩碳洩漏,鼓勵歐盟境內外生產商減少碳排放

2021年4月22日全球氣候峰會招開後,全球對於碳管理議題逐步升溫,各國紛紛提出自己的減碳承諾,而歐盟協議 2030年減碳55%,並透過「氣候法 (Climate Law) 」要求會員國應擬定自身國內的溫室氣體減量、投資綠色技術和保護自然環境等機制,以實現溫室氣體淨零排放 (Net Zero Emission) 的目標;7月14日歐盟於全球氣候峰會承諾的減量基礎上,發佈了碳調整機制 (CBAM, carbon border adjustment mechanism),建立相關減碳措施,減緩碳洩漏 (Carbon Leakage) 的情境發生,而該機制是基於歐盟的國際承諾與WTO相關要求,於整體框架下建立了六個不同的選項,歐盟進口商需依據預設值或實際排放量支付碳稅:

  • 選項1:進口碳稅 (import carbon tax):由進口商在輸入產品進入歐盟時,依據當時的歐盟碳價 (carbon price) 與設定的碳排放強度進行課稅;進口商有機會依據其碳足跡及於生產國支付的碳價請求減少CBAM。
  • 選項2:申報預設碳排放與CBAM憑證:適用於境內生產之進口系統的配額制度,該系統與EU ETS類似,進口商依據進口至歐盟產品的申報CBAM憑證 (CBAM certificates)。該憑證價格會依照購買時EU ETS的價格核算,以確保碳定價方法的一致性,但該憑證不會與EU ETS系統的配額產生連結;國家層級的氣候機構將會負責CBAM憑證的販售,進口商將遞交經查驗的進口產品排放申報與相應排放量的CBAM憑證。這類的申報與退稅,將會於進口年的次年,進行年度核對時確認,產品碳排放強度以預設 (default) 值為準,進口商有權於年度查帳時依據其排放表現要求降低CBAM,也可以依據生產國支付碳價,要求減少CBAM。
  • 選項3:申報實際碳排放與CBAM憑證:運作方式與選項2類似,但進口的碳價是基於生產商的實際排放量,而非歐盟生產商的平均預設值。進口商需申報實際排放量與檢附相應排放量的CBAM憑證。
  • 選項4:適用方法與選項3相同;進口產品檢附相應排放量的CBAM憑證,但本方案考量自2026起的10年間,每年降低10%的EU ETS免費配額,並分階段實施CBAM憑證。
  • 選項5:為選項3的變形,其範圍延伸到價值鏈 (value chain),這將涵蓋整個碳密集型材料 (Carbon-intensive materials) 的成品與半成品。對於進口的部分,CBAM將基於第三國生產者的實際排放量而定。
  • 選項6:對歐盟境內和進口的碳密集型材料徵收消費稅 (excise duty),除了延續EU ETS,包含歐盟的免費生產配額。

 

依照附錄一的要求,包含水泥、電力、肥料、鋼鐵、鋁等產品;法案預計2023年1月1日生效。

 

CBAM 產品碳含量計算準則

依據上述選項,進口商可按照進口產品的實際排放量或生產國已支付的碳價,要求減少CBAM憑證購買,間接鼓勵第三國生產商降低製程碳足跡。德國萊因管理系統服務部林琦桓技術經理表示,全面產品碳足跡評估,應以歐盟CBAM的產品碳含量 (embedded emissions) 的方法進行評估,需留意歐盟對於相關計算的準則如下:

 

淨零減碳多管齊下,永續企業競爭力

面對現今的政經環境,企業經營須面對複合型的事件衝擊,誰能早想一步,多做一步,未來遭遇事件時,越能在變動的環境中生存與茁壯。

德國萊因建議企業應透過不同管理系統與碳管理標準的整合運用,檢視產品與組織型碳排放,逐步建立原物料與運輸的排放資訊後,將有助於對高排放的物料、運輸進行調整,強化自身的體質。

德國萊因身為碳與能源管理驗證的領先機構,我們累積了大量的跨國、跨平台、跨產品與多標準整合的經驗。自2009年起,積極關注全球碳及能源管理相關議題,並提供組織型溫室氣體盤查查驗 (ISO 14064-1)、產品碳足跡查驗(ISO 14067) 與能源管理系統驗證 (ISO 50001) 的服務,廣泛的協助國內外企業面對來自客戶與當地監管機構的需求,包含大中華區、越南、印尼、泰國、菲律賓、柬埔寨、緬甸、馬來西亞等地業者,在鋼鐵、機械、汽車、電子、資訊、太陽能、化工、紡織、製鞋、傢俱、醫療、百貨流通、高等教育、交通管理領域都能提供能源管理或碳管理驗證服務。

 

相關文章

歐洲鋼鐵工業面臨碳預算超額的風險,淨零目標難以實現

 

作者介紹

解讀歐盟新電池法規:有毒有害物質限制 <質者見質>

 

背景

電能是一種清潔能源,電池是儲存可再生電力、實現可循環經濟的有效方式。未來幾年電池的需求將迎來迅速成長,預計到2030年全球電池需求將成長14倍。電池需求的快速成長,導致原材料需求等量成長。而原材料中的汞、鎘、鈷、鋰、鎳、錳等元素,不僅損害人體健康,也給環境造成極大危害。

如何控制電池成長帶來的負面影響?2020年12月10日歐盟發佈了新電池法的提議草案,擬廢除歐盟現行電池指令(2006/66/EC),以確保投放歐盟市場的電池在整個生命週期中的永續性、高性能和安全性。新電池法規要求對電池中使用的物質進行風險評估和風險管理,更新了相關有害物質的限制條件和豁免條件,並要求委員會在發現電池中使用或存在的物質對人體或環境有害時,通過授權法案新增限制物質。新電池法草案同時更新標籤規範,要求在標籤中增加對危險物質和安全風險的說明。

 

有毒有害物質管控要求

新電池法規仍保持歐盟現行電池指令中對電池中汞和鎘的限制,但對限制條件和豁免條件進行了更新,並引入新的有毒有害物質限制要求,具體如下:

 

物質或物質組的名稱

限制條件

汞
CAS號:7439-97-6
EC號:231-30%-7及其化合物

1. 電池,無論是否與電器結合,按重量計汞含量不得超過0.0005%。

2. 指令2000/53/EC適用的車輛中使用的電池,其均質材料中汞的重量不得超過0.1%。

鎘
CAS號:7440-43-9
EC號:231-152-8及其化合物

1. 可擕式電池,無論是否併入電器,按重量計鎘含量不得超過0.002%。

2. 第1點中規定的限制不適用於以下用途的可擕式電池:
(a) 應急和報警系統,包括應急照明;
(b)醫療設備。

3. 指令2000/53/EC適用的車輛中使用的電池在均質材料中的鎘含量不得超過0.01%(按重量計)。

4. 第3點中規定的限制不適用於根據指令2000/53/EC附錄II享受豁免的車輛。

 

標籤和資訊要求

新電池法規更新了標籤和資訊要求,規定自2027年1月1日起,應在電池上附有含電池基本資訊的標籤,包括製造商資訊、電池類型、化學組成、除鉛、鎘、汞以外的其他有害物質,關鍵原材料等八項內容。所有電池都需要標注分開收集標誌(十字劃叉的帶輪垃圾桶標誌),鎘含量>0.002%,或鉛含量>0.004%時,需在垃圾桶下面標注對應超標元素的符號。另外還需要標注電池容量。

 

電池廢棄物管理要求

在廢舊電池的處理上,掩埋、焚燒、堆肥以及不完善的再利用方法均有可能造成二次污染,對環境造成危害。在瑞士有專門處理廢舊電池的工廠採用“熱處理”方法,將舊電池磨碎後進行爐內加熱等一系列操作;德國相關企業則採用“濕處理”借助離子樹脂從電解質溶液中提取各種金屬以及“真空熱處理法”處理廢舊電池。相較而言,國內對廢舊電池的處理方法還未完善,需要進一步研發成熟的廢電池處理技術。

具體而言,廢舊動力電池在應對環境污染方面,目前電動汽車企業一般採用循環回收利用和延長電池使用壽命兩種方法。特斯拉在2019年全球回收廢舊電池金屬達1430噸,做到了100%回收。而其電池組壽命的設計超過了車輛的使用年限,車輛在跑15-20萬公里時,電池的平均退化程度不到15%。因此從商業和環保兩個角度出發,未來對電池使用壽命和續航里程的提升是汽車產業和使用者的共同目標。做到這兩點也可以減少廢舊電池對環境的污染。

 

結語

總之,電池供應商在生產電池時,應限制在電池中使用有害物質,達到投放歐盟市場電池的產品要求。同時,也應重點關注減少廢物中此類物質的存在,可以通過適當收集和回收可擕式電池來解決,在新電池法規中對電池收集率也有單獨修訂要求。

此外,企業應建立廢棄物管理機制,提高管理水準,以確保二次原材料市場運作良好,同時防止和減少電池生產和使用過程,以及電池壽命結束時的處理,包括回收利用等對環境的影響。

紙飲管可能致癌?嚇得我當場戒奶茶!

近年「走塑」環保風氣盛行,不少消費者或餐廳都主動「走飲管」,可是根據海洋公園基金會於4月16日至5月7日成功訪問了本港1,000名15歲至59歲的市民,結果發現即棄塑膠飲管使用量,從去年每人每星期4支增至4.4支。是2017年至今四年間首度錄得升幅。

部分餐廳改為提供紙飲管,然而它的安全性受到關注。歐洲的最新調查測試都發現,部分紙吸管(及一次性塑料餐具替代產品)存在安全隱患。這可就更不可忍了。

今年5月末歐洲消費者保護協會(BEUC)發布的一項研究結果表明,不少替代產品存在有害物質。 BEUC對來自法國、丹麥、意大利和西班牙的57種一次性非塑料餐具進行測試,發現53%的測試產品含有超過推薦值的有害物質,包括潛在致癌物質。另外21%含有這些接近限值的化學物質。

第一組,23個由模製天然纖維(主要是甘蔗渣)製成的碗和盤子——100%的產品氯丙醇或含氟化合物 (PFAS)超過推薦值。

第二組,18根紙飲管——45%的產品氯丙醇或含氟化合物 (PFAS)超標,另外33%的產品氯丙醇或含氟化合物 (PFAS)或農藥殘留接近德國/丹麥的推薦值。

第三組,16個棕櫚葉製成的碗和盤子——37%的產品氯丙醇或含氟化合物 (PFAS)或農藥殘留接近德國/丹麥的推薦值。

 

Source: BEUC TOWARDS SAFE AND SUSTAINABLE FOOD PACKAGING

 

不要用紙飲管喝熱飲

不要讓紙飲管長時間浸泡在飲品中

不要啃咬飲管,以免產生碎渣或碎屑污染食品

選擇原色產品,能避免更多使用著色劑、油墨可能帶來的有害物質遷移風險

不少食品品牌正在推出無需飲管的新設計,也值得支持

一站式綠色產品解決方案 One-stop Green Product Solutions

世界發展至今,人們對生存環境的品質要求越來越高,環保意識已成為國際主流,再生產品的興起已成為當今環保版圖不可或缺的一部分。

Since the development of the world, people have higher and higher requirements for the quality of the living environment. Environmental awareness has become the international mainstream, and the rise of recycled products has become an indispensable part of today’s environmental protection landscape.

本屆東京奧運, 除了在為體育選手加油的同時,您有發現我們也在為環境永續加油嗎?

In Tokyo 2020 Olympics, in addition to cheering for athletes, have you found that we are also cheering for environmental sustainability?

 

東京奧運的頒獎台是史上首次採用塑膠廢棄物所製成的。40萬個回收塑膠瓶製成的頒獎台。

The podium for the Tokyo Olympics was made of plastic waste for the first time in history. This a podium is made of 400,000 recycled plastic bottles.

 

回收電子廢料製成的5000面奧運獎牌

5000 Olympic medals are made from recycled electronic waste

 

奧運村廣場使用的四萬支木材,來自主辦方向日本63個地方政府,獲經森林認證體系批准出借的木材,在大會使用完畢後必需歸還政府,繼續循環使用。

The 40,000 sticks of wood used in the Olympic Village Plaza are from the organizer and borrowed from 63 local governments in Japan that approved by the FSC. They must be returned to the government after the Olympics for continued recycling use.

 

99%比賽用品能被重複使用與回收

99% of game supplies can be reused and recycled

 

本屆奧運會是首次有18000張床架幾乎使用可再生材料製成,床墊也來自再生使用的聚乙烯材料,可承重200公斤。

For the first time in Olympics, there are 18,000 bed frames made of almost recycled materials, and the mattresses are also made from recycled polyethylene materials, which can support 200 kgs.

 

大會員工的運動服由回收塑膠、植物纖維製成。

The sportswear of Olympic staff is made of recycled plastic and plant fiber.

 

聖火台座所使用的金屬來自311大地震時建造的臨時房屋之回收鋁材料。

The metal used in the torch pedestal comes from recycled aluminum materials from temporary houses built during the 311 earthquake.

 

 

垃圾變廢為寶,資源循環再利用的概念已勢在必行

Turning waste into new product, the concept of resource recycling is imperative.

 

德國萊因TÜV是全球提供獨立檢驗服務的領導者,擁有近150年歷史,在全球各地設有分支機搆,服務涵蓋產品服務、工業服務與資訊安全、交通服務、管理系統服務和萊因學院與生命關懷。德國萊因TÜV以公正獨立的角度提供各項專業評估,為您及您的客戶提供符合安全、品質以及環保的一站式綠色解決方案:

TÜV Rheinland is a global leader in providing independent inspection services. It has a history of nearly 150 years and has branches all over the world. Its services cover product services, industrial services and information security, transportation services, management system services, and Academy and Life Care . TÜV Rheinland provides various professional assessments from an impartial and independent perspective to provide you and your customers with a one-stop green solution that meets safety, quality and environmental protection:

 

回收材料認證:

Recycled material certification:

 

國際可持續發展與碳認證(生物質可持續認證)

ISCC/ISCCPlus (International Sustainability & Carbon Certification)

 

全球回收標準認證 (即將推出)

GRS (Global Recycled Standard Certification)

 

TÜV回收材料認證

PCR (Post-consumer Recycled Materials Verification)

 

回收產品認證 (適用塑膠製品):

Recycled product certification (applicable to plastic products):

 

DIN Certco Products made from recycled materials

 

Products made from recycled materials – Flustix

 

 

綠色產品認證 (適用各類消費品):

Green Product Mark (applicable to all kinds of consumer products):

 

綠色產品認證

GPM (Green Product Mark)

 

唯有和自然健康發展齊頭並進,人類的未來才會更幸福完美。德國萊因TÜV與您一起攜手打造全產業鏈閉環解決方案,為世界可持續發展之路點燈照明!

Only by keeping pace with the healthy development of nature can the future of mankind be happier and more perfect. TÜV Rheinland will work with you to create a closed-loop solution for the entire industry chain and light up the world’s sustainable development road!

 

德國萊因TÜV綠色系列解決方案包羅萬象,總有一款適合您!

TÜV Rheinland Green series solutions are all-encompassing. There is always one for you!

跟著楊勇緯一起,初探ISO 9001品質管理

初次踏上奧運殿堂就榮獲柔道銀牌的楊勇緯,讓大家見識到他的努力與企圖心。然而從檢測驗證的角度來看,更令人印象深刻的是他達成目標的方法。

根據<獨立評論>文章報導:楊勇緯在賽前學習大谷翔平的「九宮格法」,把奧運奪金的目標拆解成80個子目標與執行細節,一次照顧一件事情,積沙成塔,提升高品質的專注力,細節就會看得更清楚,也就更容易達成目標。

 ► 楊勇緯的九宮格心法

 

等一下!

這樣細緻分類、循序漸進、逐一完成的過程方法,不就跟 ISO 9001之於企業品質管理有同工異曲之妙嗎?

德國萊因品質管理經理,同時也是IRCA認可ISO 9001主導稽核員的樊國紀如此比喻:假設目標設定想減重2KG ,多益想考800分,要怎樣達成目標? ISO 9001訂出七項品質管理原則,並要求企業在品質管理上要設定目標,針對目標整合相關資源,進行相關設計製造生產品管,考慮如合整合資源、怎樣採取行動、如何按步就班去達成想追求的目標。

ISO 9001認證就等於英檢證書一樣,求職會有加分的效果。經過第三方獨立的認證機構如德國萊因的稽核,企業如果符合ISO 9001標準的要求就能獲取認證。以醫院為例,有ISO 9001認證代表這家醫院會訂出明確的工作守則和程序,醫療人員更容易掌握醫療行為等狀況,減少出錯,以病人的角度看,光是聽到去醫院,診療會減少出錯,是不是就覺得差很大了?!

ISO 9001能夠增強人員的系統性思維,站在整個企業經營者的角度俯瞰企業的整體運作。不僅是品質工作者的入門課程,更是企業裡每個工作者都必須掌握的思維利器。

 

【萊因學院 ISO 9001品質管理系列8-10月公開課程,優惠報名開始! 】

即日起,報名以下萊因學院課程系列課程,於報名時輸入折扣碼,即可獲得買一送一的優惠:

  • ISO 9001 : 2015 品質管理課程
  • ISO 9001 : 2015 標準解析
  • ISO 9001 : 2015 品質管理系統內部稽核員訓練
  • IRCA國際認可ISO 9001 : 2015品質管理系統主導稽核員
  • 如何運用ISO 9001:2015 執行內部稽核
  • 如何運用ISO 9001:2015 管理與機會風險
  • 如何運用ISO 9001:2015 規劃流程與管理知識
  • 如何運用ISO 9001:2015 領導團隊創造成效
  • 如何運用ISO 9001:2015 分析資料與改善績效
  • 品質領導力——領導者思維模式與團隊賦能(線上課程)
  • 經營的品質——領導者的品質思維(線上課程)

► 優惠期間 : 即日起至2021年12月31日止

► 課程資訊 / 報名 : https://bit.ly/2TRj8q1

► 哪裡取得折扣碼?

收聽樊老師在Podcast【萊聊安全BAR】分享ISO 9001到底是什麼,折扣碼就在其中喔~

►► 點此收聽

 

全球排碳壓力增 能源效率標準重要性更勝以往

國際能源署IEA 在2021年4月20日發布的《2021 年全球能源評論》中預估,全球二氧化碳排放量將在 2021 年達330億噸,比起2020年激增 15 億噸 – 這是史上第二大增幅,反而大幅扭轉2020年因 COVID-19大流行造成的停滯下降。”IEA 執行董事法提赫·比羅爾 (Fatih Birol) 說“除非世界各國政府迅速採取行動開始減排,否則我們可能會在 2022 年面臨更糟糕的情況。

根據外媒報導,緊接著在4月22日(世界地球日)由美國總統拜登主持的全球領袖氣候峰會中,拜登宣布美國史上最大的減碳承諾,新目標務必使2030年排碳量較2005年減少50%到52%。這一個巨大的挑戰,在可預期的未來美國將加速各項節能減碳政策的推動。

 

美國加州能源委員會電腦及顯示器能效要求成為示範標準

隨著2019新冠病毒疫情影響至今,居家辦公和遠距教學儼然已成為多數人的日常,伴隨而來的是電腦和電腦顯示器的需求激增!美國加州能源委員會 (US CEC) 早在2016年12月1日立法通過電腦和電腦顯示器能源效率法案,該法案分為兩階段生效實施,第一階段2019年1月1日,第二階段2021年7月1日。加州能效標準經常成為其他州和全國的示範標準,這項強制性的法案至今已帶動全美9個州相繼跟進,美國能源部 (DOE) 也已開始制定國家電腦效率標準,但尚未發布提案。

以下為目前美國已跟進加州能源委員會電腦及顯示器能源效率要求的州別:

 

州別

立法日期 (MM/DD/YYYY)

生效日期 (MM/DD/YYYY)

佛蒙特 (Vermont)

05/21/2018

01/01/2020

夏威夷 (Hawaii)

05/01/2019

01/01/2021

科羅拉多(Colorado)

05/30/2019

01/01/2021

華盛頓(Washington)

05/07/2019

01/01/2021

華盛頓哥倫比亞特區(District of Columbia)

12/22/2020

03/15/2022

麻薩諸塞(Massachusetts)

03/26/2021

01/01/2022

內華達(Nevada)

05/31/2021

07/01/2023

奧勒岡(Oregon)

06/01/2021

01/01/2022

缅因(Maine)

07/08/2021

01/01/2023

 

加拿大卑詩省率先跟進加州能源委員會電腦及顯示器能源效率要求

鄰近的加拿大卑詩省 (British Columbia, Canada) 是加拿大各省中率先跟進美國加州能源委員會電腦及顯示器能源效率要求的一省。加拿大卑詩省於2021 年 2 月 16 日核准能源效率標準條例 (EESR) 修正案,內容包括新增電腦和電腦顯示器的能源效率要求。該法規的目的是提高新電腦和電腦顯示器的能源效率,以降低私人和企業的能源成本,並支持具有競爭力的電費率。

以下為加拿大卑詩省電腦和電腦顯示器的能源效率要求法規摘要:

<< 受管制產品 >>

電腦 (Computers):指能進行邏輯運算與數據處理之設備,包括固定和攜帶型設備

  • 桌上型電腦 (desktop computers)
  • 電競筆電 (mobile gaming systems)
  • 精簡客戶端 (thin clients)
  • 筆記型電腦 (notebook computers)
  • 移動整合式電腦 (portable all-in-ones)
  • 高擴充性電腦 (high expandability computers)
  • 移動工作站 (mobile workstations)
  • 工作站 (workstations)
  • 機架式工作站 (rack-mounted workstations)
  • 小型伺服器 (small-scale servers)
  • 排除產品:遊戲主機、工業電腦和平板電腦等

 

電腦顯示器 (Computer monitors):指具有以下特性的類比或數位設備

  • 主要用於顯示電腦生成的信號
  • 螢幕對角線尺寸不少於 17 英寸,以及不超過 61 英寸
  • 像素密度大於每平方英寸 5000 像素
  • 由顯示螢幕和相關電子設備組成
  • 排除產品 :醫療顯示器、電視機等

 

<< 能效標準 >>

最低能效標準與美國加州能源委員會電腦及顯示器能源效率標準一致

 

<< 測試方法 >>

電腦:參照能源之星電腦測試方法2016-03修訂版

電腦顯示器:參照能源之星顯示器測試方法2015-09修訂版

 

<< 生效日期 >>

該標準適用於 2021 年 7 月 1 日或之後生產的所有受管制產品

 

<< 驗證>>

受管制的產品必須透過官方指定的途徑,符合產品驗證要求及登錄於可線上查詢的資料庫

德國萊因提醒,雖然加拿大卑詩省的電腦和顯示器能源效率要求與美國加州能源委員會的標準一致,但不同的是,加拿大卑詩省受管制的產品必須透過官方指定的途徑(例如:符合ISO/IEC 17065標準的產品驗證單位)進行驗證。德國萊因擁有完整的能效測試單位資格,包含為能源之星 (Energy Star) 認可實驗室、美國加州能源委員會認可實驗室和加拿大標準委員會 (Standards Council of Canada, SCC) 認可實驗室等,可以提供一步到位的完整服務。

 

參考資料 :

透過下方的網址將可取得完整的《2021 年全球能源評論》、加拿大卑詩省公報與規範 Global Energy Review 2021 / Regulatory Bulletin / B.C. Energy Efficiency Standards Regulation (B.C. Reg. 14_2015) 。

2021年8月國際市場准入資訊更新

資訊 / 電信 ITE / Telecom

Afghanistan 阿富汗

阿富汗 ATRA 發佈新的型式認證批准程序。

On May 2021, the Afghanistan Telecom Regulatory Authority (ATRA) published a New Type Approval procedure, which has already entered into force.

This provision includes, but it is not limited to the following equipment:

  • Fixed Radio Transmitters
  • Mobile Terminal Equipment
  • Broadcasting Equipment
  • Satellite Transmitter Equipment
  • Frequency dependent Medical Equipment and Devices
  • Short Range Radio Devices

 

ATRA may require testing, when this is the case one commercial sample shall be included in the application and shall come with where necessary accessories, device drivers and software and RF cables. This sample will be retained and used by ATRA.

Type Approval Certificates will be valid for an unlimited duration.

All approved equipment should follow the below labelling requirement:

 

Indonesia 印尼

SDPPI將接受國外檢測報告的受理時間又延長了6個月,日期至2021年12月31日。

SDPPI had extended the foreign test report acceptance for another 6 months. The date of acceptance is until 31st December 2021. It is not announced officially but the extended date are reflected on the Lab List in the website.

 

Ivory Coast (Cote d ‘Ivoire) 象牙海岸

在 76-77 GHz 頻段運行,用於車輛防撞雷達的設備現已在象牙海岸獲得批准,可申請型式認證。

Equipment operating in the 76-77 GHz frequency band intended for vehicle collision avoidance radars are now approved in Ivory Coast (Cote d’Ivoire). This information follows a letter referenced number: 0021/250 / DGF / DITBS / SATR / DP from AIGF (Ivorian frequency management agency) addressed to ARTCI, the telecommunications regulatory agency of Cote d ‘Ivoire.

 

Malaysia 馬來西亞

馬來西亞 MCMC 已於 2021 年 6 月發佈新的頻率分配。

Malaysia MCMC had issued the new Class Assignment in June of 2021.

There are few changes from Class Assignment No.1 2020 to Class Assignment No.1 2021

  • New Frequency Added
  • Removed Usage of the frequency
  • Removed Lease Channel Radio Access devices schedule and change the total schedule to twenty-eighth schedule (CA No.1 2020 is twenty-ninth schedule)

 

Saudi Arabia 沙烏地阿拉伯

CITC 已更新通訊和資訊技術設備的技術規範,以適應最新的技術發展。這些規範涵蓋了所有制造或供應給沙烏地阿拉伯的通訊和資訊技術設備,作為其批准的技術基礎,並且對在沙烏地阿拉伯製造、供應或銷售這些設備的所有各方也具有約束力。

CITC has updated the technical specifications of communications and information technology devices and equipment to accommodate the latest technological developments

These specifications cover all communication and information technology devices and equipment that are manufactured or supplied to the Saudi Arabia as the technical basis for their approval, and are also binding on all parties that manufacture, supply, or sell these devices and equipment in the Saudi Arabia.
As part of CITC’s continuous emphasis on transparency and public participation in the decision-making process, CITC has surveyed the public’s views on the draft technical specifications before issuing the final official versions.

We would like to inform you that CITC has approved and published the updated technical specifications on CITC’s website through the link below

https://www.citc.gov.sa/en/RulesandSystems/RegulatoryDocuments/EquipmentApproval/Pages/Technical_Specification.aspx

 

Saudi Arabia 沙烏地阿拉伯

SASO 已就SASO IEC 62368-1:2020 標準的實施做出以下決定:

1.SASO IEC 62368-1:2020 的執行日期延後至2023年1月1日 ,也就是自2023年1月1日起將只接受IEC 62368-1第三版CB證書與測試報告 (IECEE 62368-1: 2018)

2.根據IEC 62368-1:2014第二版的CB證書與測試報告將被接受到 2022年12月30日

SASO has decided the followings regarding the implementation of the standard SASO IEC 62368-1:2020 :

1.The new date to enforce the standard SASO IEC 62368-1:2020 will be January 01, 2023 instead of July 01, 2021.

2.The test report as per SASO IEC 62368-1:2017 AS (IEC 62368-1:2014) will be accepted until the date of December 30, 2022.

 

RoHS / REACH

Saudi Arabia 沙烏地阿拉伯

2021 年 7 月 9 日,沙烏地阿拉伯標準、計量和品質組織 (SASO) 發佈沙烏地阿拉伯 RoHS 技術法規。 該法規旨在限制在電氣和電子設備中使用某些有害物質,並定義供應商必須遵守的合格評定程序。相關方必須在 2022 年 1 月 5 日 (官方公報上公佈後 180 天) 滿足本條例的規定。 不符合規定的產品自發佈之日起最多可在市場上流通一年。

On 9 July 2021, the Saudi Arabian Standards, Metrology and Quality Organisation (SASO) issued a Technical Regulation for Saudi Arabia RoHS. The Regulation aims to restrict the use of certain hazardous substances in electrical and electronic equipment, and to define conformity assessment procedures to which suppliers must adhere.

Relevant parties are given until 5 January 2022 (180 days after publication in the official gazette) to meet the provisions of this Regulation. Non compliant products can be circulated in the market for a maximum period of one year after publication.

 

家用電器 House Appliances

Brazil 巴西

2021 年 6 月 25 日,巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈第 267號協議,批准商用電烤箱的品質技術法規和合格評定要求。該協議於 2021 年 7 月 1 日生效。

On 25 June 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No 267 to approve the quality technical regulation and the conformity assessment requirements for commercial electric ovens.

This Portaria approves the consolidated regulation for commercial electric ovens and establishes the technical regulation on quality, conformity assessment and specifications for the conformity identification mark through Annexes I, II, and III.

It applies to combined, forced convection and ballast electric ovens, closed, with nominal power below 20kW, power supply voltage up to 250V for single-phase and 480V for three-phase, with or without forced air convection.

Gas-fired ovens which have electrical parts contributing to their operation shall be subjected to safety tests.

Concerning marking, the product must be supplied with adequate information, legible, and located in an appropriate place, the instruction for use, maintenance, and installation, which is essential for the use of the appliance without any safety risks for the user.

This Portaria enters into force on 1 July 2021.

 

Brazil 巴西

2021年6月25日,巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈第 268 號協議,批准微波爐的品質技術法規和合格評定要求。該協議於 2021 年 7 月 1 日生效。

On 25 June 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 268 to approve the quality technical regulation and the conformity assessment requirements for microwave ovens.

This Portaria approves the consolidated regulation for microwave ovens and establishes the technical regulation on quality, conformity assessment and specifications for the conformity identification mark through Annexes I, II, and III.

It applies to household microwave ovens.

This Portaria enters into force on 1 July 2021.

 

Brazil 巴西

2021年6月26日,巴西國家計量、標準化和工業品質研究所 (INMETRO/CONMETRO) 發佈第 269 號 協議,批准空調的合格評定要求。該協議於 2021年7月1日生效。

On 26 June 2021, Brazil’s National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 269 to approve the conformity assessment requirements for air conditioners.

This Portaria approves the consolidated regulation for air conditioners and establishes the technical regulation on conformity assessment and specifications for the conformity identification mark through Annexes I and II.

It applies to monoblock, single-body window or wall-mounted, and split-system type air conditioner, with a cooling capacity of up to 17.58 kW (60,000 BTU/h).

The following products are excluded from the scope of this Portaria:

portable, duct, and multi-split type air conditioners;

  • air conditioners for land, railway, maritime, and air vehicles;
  • air conditioners with condenser units powered by solar energy.

According to Article 5, when sold in physical or virtual places, products must bear the ENCE in a visible manner and, in the case of virtual commerce, the site administrator must provide the ENCE or the information contained therein in text format on all pages where the product is offered or displayed, in an ostensible, unambiguous manner next to the image or identification of the product model. The same applies to sales catalogues.

Annex I deals with the pre-market and conformity assessment requirements for air conditioners. Air conditioners manufactured, imported, distributed and marketed in the national territory must be subject to conformity assessment through the supplier declaration mechanism. The certification of air conditioners must be conducted by family, which is constituted as the set of models, produced in the same manufacturing unit, intended for the same function and that can be grouped according to their constructive characteristics.

The Air conditioners must be subjected to all the safety tests laid down in IEC 60335-1 and IEC 60335-2-40.

Finally, Annex II demonstrates the Conformity Identification Mark and the National Energy Conservation Label – ENCE.

This Portaria entered into force on 1 July 2021.

 

Chile 智利

[法規草案] SEC計畫更新家用加熱器的安全測試和認證協議PE Nº1/19。該協議草案正在徵集意見,主要變化包含:

1. 更新標準

2. 更新強制產品範圍

3. 更新認證單元劃分原則

4. 其他要求等

SEC is analyzing the update of SEC Protocol PE N°1/19. The SEC protocol is under public consultation. The main changs proposed are:

1. update of standard

2. clarification of scope

3. clarification for the way to conform a faimily.

4. other requirements.

 

Taiwan 台灣

2021 年 6 月 24 日,台灣標準檢驗局公告修正「應施檢驗電風扇等七項商品之相關檢驗規定」,並即日起立即生效,自 2023年1月1日起強制實施。

針對二次鋰系電池的安全問題,標檢局擴大列檢包含電風扇、真空吸塵器及吸水清潔機、電動食品碾磨機、電動食品混和器、電動榨汁機、燙(整)機和電動按摩器具等7種電器。這些產品使用的二次鋰系電池/電池組應符合CNS 15364:2013和CNS 62133-2:2018第7.3.8.1節「振動」和7.3.8.2節「機械衝擊」。

Amendments to the Legal Requirements for Fans and 6 Other Electrical Appliances

On June 24, 2021, the Taiwan Bureau of Standards, Metrology and Inspection (BSMI) approved the Amendments to the Legal Requirements for Electrical Appliances (fans, vacuum cleaners & water-suction cleaners, electric food grinders, electric food mixers, electric juice extractors/ fruit squeezers, electric hair setting curlers, electric massage appliances)

In response to the safety concerns of secondary batteries which resulted in increasing incidents of explosion, the Bureau of Standards, Metrology and Inspection (BSMI) include products with secondary cells/batteries in the inspection scope based on a staged approach. This proposal covers fans and 6 other electrical appliances and the secondary cells/batteries used by these products shall comply with CNS 15364: 2013 and Sections 7.3.8.1 “vibration” and 7.3.8.2 “mechanical shock” of CNS 62133-2: 2018. Relevant administrative arrangements for products already certified are provided. The regulation is with immediate effective and the date of implementation is 1 January 2023.

 

Thailand 泰國

2021 年 6 月 16 日,泰國工業部宣佈一項關於空調強制性安全要求的部級法規。 該法規主要要求空調必須符合工業標準 TIS 1529-2561。 該標準將於 2022 年 6 月 15 日起強制實施。

On 16 June 2021, the Thai Ministry of Industry announced a ministerial regulation on Mandatory Safety Requirements for Air Conditioners.

The Regulation primarily requires that air conditioners must comply with Industrial Standard TIS 1529-2561 issued in accordance with the Industrial Product Standards Act.

The Standard will be of mandatory application with effect from 15 June 2022.

 

能源效率要求 Energy Efficiency Requirements

India 印度

因疫情影響, BEE已向電力部提出延長儲能式電熱水器原2021/06/30到期之標準效期。

在延長期限前已獲批准的星級標籤的型號,於此狀態中依舊有效。續批准無需支付續期費用。需確認延長期間將繼續使用的模型數量。

BEE proposes to extend the validity of existing energy performance standard of Electric Water Heaters.

The existing energy consumption standards for Storage Type Electric Water Heater are valid till 30th June 2021 and the revised energy consumption standards are to be made effective from 1st July 2021.

In view of the adverse impact of the COVID -19 pandemic on the business of Indian Storage type Electric Water Heater, BEE has sent the proposal to Ministry of Power to extend the existing energy performance standard of Electric Water Heater.

Accordingly, the portal to seek continuation approval for already approved star labelled models till the extended period is being made live. No renewal fee to be paid for seeking the continuation approval. Kindly confirm the number of models to be continued during the extended period.

 

India 印度

[法規草案] 印度公佈 <<能源局電吊式風扇標籤的詳細資訊和顯示方式, 2021令>> 的草稿規範,目前意見募集中,正式公告後六個月納入強制。

DRAFT “Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Electric Ceiling Type Fans) Regulations, 2021”

The regulation may be called “the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Electric Ceiling Type Fans) Regulations, 2021”.

Particulars to be displayed on label.- (1) On every Electric Ceiling Type Fan, the following particulars shall be displayed on its label, namely:-

(a) the logo of the Bureau of Energy Efficiency;

(b) name of manufacturer or importer and brand;

(c) trade name and number;

(d) model and year of manufacturing or import;

(e) unique series code;

(f) power input in watts;

(g) air delivery in cu m/min;

(h) service value in cu m/min/Watts;

(i) star level of Electric Ceiling Type Fan ; and

(j) label period

 

Mexico 墨西哥

2021年6月12日,NOM-015-ENER-2018的最终过渡阶段已结束,这意味着墨西哥的家电冰箱和冰箱销售的销售必须符合最大能耗限制和标签要求。

Mexico’s National Commission for the Efficient Use of Energy CONUEE is reminding interested parties that with the entry into force of the third and last stage of NOM-015-ENER-2018 refrigerators and freezers purchased by Mexican consumers must have the same energy efficiency levels as those sold in the United States and Canada.

On 12 June 2021 the final transitional phase under NOM-015-ENER-2018 ended, meaning that household appliance refrigerators and freezers marketed in Mexico must comply with the maximum energy consumption limits and labelling requirements.

The energy consumption specifications and the test methods for refrigerators and freezers are now fully aligned with current regulations in the United States and Canada.

 

Singapore 新加坡

2021 年 3 月 26 日,新加坡国家环境局 (NEA) 批准修订《节能 (管制商品和注册供货商) 条例》。 该修正案规定了三相 VRF 空调的最低能效标准 (MEPS) 和强制性能源标签计划 (MELS)。 该修正案于 2021 年 4 月 1 日生效。

On 26 March 2021, the Singapore National Environment Agency (NEA) approved an amendment of the Energy Conservation (Regulated Goods and Registered Suppliers) Regulations.

This amendment sets out the Minimum Energy Performance Standards (MEPS) and the Mandatory Energy Labeling Scheme (MELS) for three-phase VRF air conditioners.

This amendment entered into force on 1 April 2021.

 

Taiwan 台灣

2021 年 6 月 11 日,台灣經濟部批准了關於空氣淨化器最低能效標準測試和能效等級標識和檢驗的通知。 本通知適用於符合CNS 16098並列入經濟部標準檢驗局檢驗目錄的空氣淨化器。本通知自 2023 年 1 月 1 日起生效。

Minimum Energy Performance Standards Testing and Efficiency Rating Labelling and Inspection for Air Cleaners

On 11 June 2021, the Taiwan Ministry of Economic Affairs approved a notice on Minimum Energy Performance Standards Testing and Efficiency Rating Labelling and Inspection for Air Cleaners.

This Notice applies to the air purifiers that comply with the CNS 16098 and are included in the catalog to be inspected by the Bureau of Standards, Metrology, and Inspections of the Ministry of Economic Affairs. This Notice does not apply to the following products:

(1) the air purifiers with CASR that’s lower than 0.26 or higher than 12.80.

(2) the air purifiers that work with only pure ozone, ultraviolet light, or photocatalyst.

(3) the air purifiers with an input voltage of the USB port body is DC 5V and the power adapter is not provided, solely with car cigarette lighter power supply, or only uses three-phase voltage or pure dry battery as the power supply.

This Notice enters into force on 1 January 2023.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

Egypt 埃及

埃及貿易和工業部頒佈了第 221 號決定,為生產商和進口商提供六個月的過渡期,以遵守一些新制定的埃及標準。該決定於 2021 年 6 月 14 日生效。

The Egyptian Ministry for Trade and Industry enacted Decision No. 221 providing producers and importers with a six-month transitional period to comply with the following Egyptian standards:

  • ES 8434 Method of measuring the energy consumption of gas-burning ovens
  • ES 8441 Eco-Friendly standards for energy efficiency of water pumps
  • ES 8459 Flexographic inks
  • ES 8284-2 Outdoor furniture – seating and tables for camping, domestic and contract use part 2 – mechanical safety and testing requirements
  • ES 8462 Furniture – sofa bed mechanisms – testing methods
  • ES 5969-2 Water meters for cold potable water and hot water – Part 2 – testing methods

 

The following two standards are no longer mandatory:

  • ES 372-2 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners Part 2 : classification of water heaters and gases
  • ES 372-3 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners Part 3 – operational requirements
    The Decision entered into force on 14 June 2021.

 

Saudi Arabia 沙烏地阿拉伯

SASO 已宣佈將原本預計在2021年7月1日實施的SASO IECEE 認可證書 (簡稱SIRC證書) 第一階段新增產品推遲至 2021 年 9 月 1 日。從 2021 年 9 月 1 日起,第一階段新增產品和第二階段新增產品都將需要 SASO IECEE 認可證書。

SASO has announced the postponement of IECEE implementation Stage 1 till September 01, 2021.

Both Stage 1 and Stage 2 products will require SASO IECEE Recognition certificate from September 01, 2021.

 

Stage 1 products:

 

Product

Testing standard

Kettles

IEC 60335-2-15

Coffee makers

IEC 60335-2-15

Electrical Oil fryers

IEC 60335-2-13

Electric pumps

IEC 60335-2-41

IEC 60335-2-51

Video Games & accessories

IEC 62368-1 : 2018

Cables

IEC 60227 & parts

IEC 60245 & parts

IEC 60502 & parts

IEC 60702-1

IEC 60800

IEC 62821 Parts

IEC 62930

 

Stage 2 products:

 

Product

Testing standard

Shavers

IEC-60335-2-8

Desktop computers

IEC 62368-1

Circuit breakers

AC Circuit breakers :

IEC60898-1

AC/DC Circuit breakers :

IEC 60898-2

DC circuit Breakers :

IEC 60898-3

Main Current circuit breaker

IEC 60947-2

Mobile charging cables

IEC 62368-1

 

Uzbekistan 烏茲別克

2021 年 6 月 2 日,烏茲別克斯坦共和國總統批准了一項法令。該法令規定,自 2021 年 9 月 1 日起,某些低風險產品的合格評定應通過合格聲明進行,無需頒發合格證書。

該法令還規定,自 2021 年 11 月 1 日起:

(a) 對某些高風險產品的進口實行國家註冊程序,確認進口產品符合技術法規的文件應在產品抵達烏茲別克前至少 15 天在海關電子程序中註冊。

(b) 具有單一符合性證書的低風險產品的進口將被授權 24 個月,合格證書應由在烏茲別克斯坦設立的經認可的合格評定機構頒發。

(c) 進口產品的符合性控制應由技術監管機構或作為其結構一部分的授權組織進行。

(d) 不合格產品清單應由技術監管機構或授權組織保存。

法令中沒有規定低風險或高風險的產品類型,這些問題將由投資和對外貿易部稍後確定。

該法令於 2021 年 6 月 3 日生效。

On 2 June 2021, the President of the Republic of Uzbekistan approved a decree. This Decree establishes that from September 1, 2021, conformity assessment of certain low-risk products shall be carried out by declaration of conformity without the issuance of a certificate of conformity. The declaration of conformity shall be drawn up on the basis of test reports after carrying out comprehensive product tests in accordance with technical regulations. Manufacturers, suppliers, and traders remain responsible for ensuring compliance with the mandatory requirements established by technical regulations and standards.

The Decree also establishes that as of November 1, 2021 :

(a) A state registration procedure for the import of certain high-risk products shall be introduced. Documents confirming the conformity of imported products to technical regulations shall be registered with the customs electronic program at least 15 days before the arrival of the products in Uzbekistan.

(b) The import of low-risk products with a single certificate of conformity will be authorized for a period of 24 months. The certificate of conformity shall be issued by an accredited conformity assessment body established in Uzbekistan.

(c) Controls of conformity of imported products shall be carried out by the Technical Regulation Agency or an authorized organization that is part of its structure.

(d) A list of non-compliant products shall be maintained by the Technical Regulation Agency or an authorized organization.

The types of products to be considered with low-risk or high-risk profiles are not specified in the Decree. These issues will be determined at a later date by the Ministry of Investment and Foreign Trade.

This Decree came into force on 3 June 2021.