德國萊因TÜV認證 TÜV Rheinland Accreditation

Bahrain 巴林

德國萊因TÜV集團香港公司近日獲得官方批准，成為巴林測試和計量局(BTMD)授權的能效註冊認可機構。

TÜV Rheinland Hong Kong Ltd. has been designated by Bahrain Testing and Metrology Directorate (BTMD) as a Notified Body for Energy Efficiency Labelling and MEPS for air conditioners, thereby able to provide technical approval and registration services to manufacturers and importers.

The regulation is defined in Bahrain’s ministerial decree No.70/2015 and has been in force since 20 February 2016. Previously all registrations could only be submitted by the local vendor (importer) in Bahrain to the EWA (Electricity and Water Authority). Starting now the registration scheme is open to designated 3rd party Notified Bodies. Overseas Manufacturers can now directly apply to the Notified Body, providing a more efficient integrated process which can combine multiple approvals together with the Bahrain Energy Efficiency Registrations, such as G-mark, Oman Energy Label etc.

The scope of the regulation covers single-package (such as window type) and split-system non-ducted air conditioners using air- and water-cooled condensers and heat pumps employing air-cooled condensers and ducted air-conditioners using air-to-air heat pumps for the residential, commercial and industrial sector.
Cooling capacities up to 70,000 Btu/h (20 kW) are considered.

 

Chile 智利

SEC頒佈了新的空調能效議定書PE N°1/26/2，新版議定書從2021年11月30日起開始強制。

與舊版議定書相比，新版議定書主要變更了如下內容：

• 測試的標準版本
• 測試電壓
• 更新能效證書的流程
• 空調強制能效產品類別
• 證書單元劃分原則

德國萊因智利公司擁有新版議定書PE N°1/26/2的發證資格；德國萊因大中華區實驗室擁有PE N°1/26/2測試資格，可以為您提供智利空調能效測試和發證的一站式服務。

There is a new EE SEC Protocol for air conditioners PE N°1/26/2 applicable as from 30.11.2021.

The important differences in this new EE SEC protocol are:

• the edition of testing standard.
• testing voltage
• renewal procedure
• EE mandatory product list
• certification family requirements

TÜV Rheinland Chile office is already authorized as Product Certification Body; TÜV Rheinland Great China labs are already authorized for the old EE SEC Protocol PE N°1/26/2:2009 and also comply with the new requirements. We are glad to provide one-stop air conditioner EE testing and certification service to you.

 

資訊 / 電信 ITE / Telecom

Australia 澳洲

新南威爾士州於3月19日發佈最新版的《新南威爾士州公報》。公佈中新南威爾士州的要求與4417.2有所不同，在定義產品分類時必須特別小心。

4417.2中的某些被列為風險級別3的產品可能不是管控的申報產品 (declared article)，而某些申報產品 (declared article)則在公報中不被視為風險級別3產品。

On March 19 2021, New South Wales published latest Government Gazette. The requirement for NSW is further deviated from the 4417.2. Some of risk level 3 product in 4417.2 may not be a declared article  and some of declared article in Gazette is not considered as risk level 3.

Summary of changes:

There is one specific relaxation in type Range pushing back the current published date by one year from 28 June 2021 to 2022.

Addition of Submersible pumps to the list. Date of application is 2023.

Addition of the international standard as an option for Arc Welders with the addition of a minor Australian deviation in the specification to ensure low flammability.

Clarification of a term ‘separate’ used in the gazette.

Clarification in the definition of DC Isolator. “and includes the dedicated individual enclosure (if any),”

Outlet Device specification precludes devices that can be wired by the user.

removal of two year limit on hair straighteners

Hedge clipper addition “has one or more reciprocating blades;”

AS/NZS 60335.1 means AS/NZS 60335.1: 2011 +A1-4; or AS/NZS 60335.1: 2020

Various minor amendments removing dates of application already in effect etc.

 

Azerbaijan 亞塞拜然

亞塞拜然驗證中心 (Azerbaijan Accreditation Center, AZAK) 於2020年12月底以正式信函表明，目前該國EMC核可驗證單位僅有一家”PROBO LLC”。以往發證單位 AzeSERT(AZS) 核發的證書都包含EMC，自今年起若產品為Safety及EMC強制專案，需申請兩張證書，Safety證書由”AZS”核發，EMC 證書由”PROBO, LLC”核發。

At the end of December 2020, Azerbaijan Accreditation Center confirmed in an official letter, that Certification body “AzeSERT (AZS)” didn‘t have the accreditation to issue EMC approval anymore.

Previously, certification body “AZS” issued certificates that covered both safety and EMC. From this year, the only certification body that has accreditation to issue EMC certificate is “PROBO, LLC”.

If manufacturers have Safety approval from “AZS”, it is therefore necessary to get an additional approval from “PROBO LLC” that covers the EMC requirement for compliance in Azerbaijan.

 

Brazil 巴西

根據第4083號法案，巴西國家電信局 (ANATEL) 至少需要使用以下資訊來標識用於本地測試的樣品：

• 型號名稱
• 製造商名稱
• 原籍國
• 可追溯性 (可以是序號，IMEI編號或可用於識別測試樣品的任何其他代碼)

在到達實驗室之前，必須正確識別測試樣品，包括進行的工程單位，否則實驗室將無法啟動測試。

The National Telecommunications Agency (ANATEL) in Brazil following Act 4083 now requires to identify samples for local tests with at least the following information:

• Model name
• Name of the manufacturer
• Origin country
• Traceability

Here it is important to note the traceability, which could be a serial number, an IMEI number or any other code that can be used to identify the test samples. Test samples must be correctly identified before arriving at the laboratory, including the conducted engineering units, otherwise the laboratory will not be able to start the tests.

The information above can be included in the following ways:

• On the Permanent label
• Temporary label
• Electronic identification (e-label/Software)
• Written in the product packaging

 

Brazil 巴西

2021年3月11日，ANATEL發佈Act 1630 – SAR的測試法規，取代之前的Act 955法規。

ANATEL publish the new Act nº 1630 (Test Procedures For Evaluating the Specific Absorption Rate (SAR) for Telecommunications Products) and it replaced the previous Act 955 (Feb 8th, 2018).

Below we list the main changes. For complete details please check the Act 1630 annex.

1.Changing the applicable frequency range from 300 MHz to 6 GHz to 4 MHz to 6 GHz.

2.Separation Distance between Manikin and the Portable Terminal up to 15 mm from any part of the human body. Before it was accepted up to 20 cm.

3.For portable devices sold with two or more batteries that have differences related to (to): load capacity, physical dimensions or protection circuit, the tests must be carried out, in full, with the battery with the greatest capacity. The remaining batteries can only be used in tests to determine the highest SAR value in each radio frequency band. Before ANATEL required to do full SAR testing in all batteries.

4.Only accessories with metallic/conductive parts must be tested along with the portable device. Accessories with other non-conductive materials (such as silicone, plastic, etc.) does not need to be tested. The accessories must be tested in the configuration of technology and RF range that has the highest SAR value of the portable device measured without accessories. Before it was required to do SAR testing with all accessories, including non-conductive.

5.Inclusion of new procedure of SAR measures for Non-Simultaneous Signals.

6.Inclusion of new procedure of Average Time Interval for Time-Averaging SAR – TAS.

7.Inclusion of new procedure to determine the maximum SAR in the spatial average of a portable devices.

 

Brazil 巴西

2020年3月9日，巴西國家電信局 (ANATEL) 發佈第1477號法案，確立了使用3,300 – 3,700 MHz頻率範圍的技術要求。該法案已於2021年4月1日生效，此後在巴西n78頻段運行的5G NR設備也需要測試。

On March 9 2020, the National Telecommunications Agency (ANATEL) in Brazil released the Act nº 1477, which establishes the technical requirements for the use of the frequency range 3,300 – 3,700 MHz.

This Act came in force on April 1, 2021 and thereafter 5G NR devices operating in the n78 band in Brazil also require test.

 

China中国

中國工信部公開徵求《汽車雷達無線電管理暫行規定（徵求意見稿）》的意見，規範76-79GHz汽車雷達技術要求 (型號核准)，並廢止24GHz車用雷達設備的許可。

The Ministry of Industry and Information Technology is seeking comments on new draft regulation “Interim Provisions on the Radio Management of Automotive Radars (Draft for Solicitation of Comments)”.

Main points of the draft: to reinstate type approval for radars in the range of 76-79 GHz and to stop approval of 24.25-26.65 GHz band vehicle radar equipment entirely from 1 January 2024.

Feedback can be given (in Chinese language only) until 6 MAY 2021 at the Radio Administration of the Ministry of Industry and Information Technology, with reference to “Interim Provision on Radio Management of Automotive Radars (Draft for Comment)”.

Source: https://www.miit.gov.cn/gzcy/yjzj/art/2021/art_02cee82d04eb4d118ac4796201dfd3c2.html

 

EAEU 歐亞經濟聯盟

2021年3月23日，歐亞經濟委員會通過了第33號決定，增加LED光源產品 (海關編碼8539 50 0000) 至強制產品清單中。該決定自2021年4月25日起生效。

On 23 March 2021, the Eurasian Economic Commission adopted Decision No. 33 to amend certain Decisions of the Board of the Eurasian Economic Commission.

The aim of this amendment is to add a new TN VED EAEU code (Nomenclature of Foreign Economic Activity) to the EAEU lists of products, in respect of which the submission of a customs declaration must be accompanied by the submission of a conformity assessment document.

The updated lists of products relate to the following technical regulations:

• TR CU 004/2011 on safety of low-voltage equipment;
• TR CU 020/2011 on electromagnetic compatibility;
• EAEU TR 037/2016 on restriction of the use of hazardous substances in electrical and electronic equipment.

The changes provide for the addition of the code 8539 50 0000 for light-emitting diode lamps to the lists.

Decision No. 33 enters into force on 25 April 2021.

 

Israel 以色列

以色列通信部擴大豁免清單。這是該法規的重要更新，某些設備的商業進口將免於許可，以鼓勵無線產品市場，通信產品和智慧家居設備的競爭。

Israel MoC Expands Exemption List

The Minister of Communications, Binyamin (Benny) Ganz, signed the Wireless Telegraph Regulations (Exemption from Licensing), 5781 – 2021.

The new regulations reduce the families of products that require approval from the Ministry of Communications for commercial import to Israel. These respites came after a period in which an exemption on personal imports was granted, in order to examine the risk of bringing the product families in question into the country without oversight. This is a significant update in the regulation, which will encourage competition in the wireless products market, communication products and “smart home” equipment, in that commercial imports of some of such equipment will be exempt from licensing.

the list of products that are exempt from SRD approval is as follows:

1.BT devices operate in the 2,400-2483.5 MHz upon IEEE 802.15.1 With integral antenna up to 100mW e.i.r.p

ANT/ANT+ devices operate in the 2,400-2483.5 MHz with integral antenna up to 100mW e.i.r.p

2.Devices intended only for the reception of satellite transmissions for position determination using a determination system Global location such as GPS, GLONASS, GALILEO or BEIDOU;

3.A parabolic antenna with a diameter not exceeding 244 cm, including side equipment used by it, intended for the reception of satellite broadcasts;

4.Operating in the field of infrared frequencies between 1,000 GHz and 3,000 GHz and which the power Their transmission does not exceed 200 mW;

5.Computer peripherals- Mouse, Keyboard;

6.Computer monitor;

7.Video Streamer (which complies with the provisions of the European Radio Equipment Directive) 2014/53 / EU, and bears the CE marking indicating this;

8.E-book reader (without cellular)

9.Tablet (without cellular)

10.Laptop (without cellular)

11.Desktop computer (without cellular)

12.Converter for receiving television broadcasts to the public) TV receiver set-top box (, which meets the provisions of the European Radio Equipment Directive) 2014/53 / EU, and bears the CE marking indicating this;

13.TV set;

14.A radio receiver for the reception of public broadcasts using FM / DAB / AM technologies;

15.Spare parts for mobile phone;

16.Wristwatch, other than cellular wristwatch;

17.Vacuum cleaner;

18.Portable battery-operated metal detector.

 

Kenya 肯亞

2021年3月23日，肯亞通信管理局發佈了移動蜂窩設備規範的修訂草案。該修訂版澄清了該規範是強制性的。

On 23 March 2021, the Communications Authority of Kenya issued a draft revision to the mobile cellular device specification. The revision clarifies that the specification is mandatory. The revision also updates the reference standards:

• IEC 62368-1:2020 Audio/video, information and communication technology equipment – Part 1: Safety requirements, replaces the withdrawn IEC 60950-1.

This specification defines the minimum features and technical requirements that mobile cellular devices sold in Kenya must meet. The requirements for Type Approval of mobile devices are summarized at Annex 1: Mobile Devices Type Approval Requirements. The mobile cellular devices covered in this Specification include, but are not limited to, handheld (both smartphone and feature phones), portable, vehicle-mounted, RF interface cards and modems capable of connecting to the public mobile communications networks.

• A physical or electronic user manual shall accompany every mobile cellular device sold in Kenya.
• Vendors shall provide at least one (1) year warranty and ensure the availably of aftersales support for a further two (2) years period for each mobile cellular device they sell.
• The test reports submitted in the Type Approval process as evidence of conformance to this Specification shall be from a test laboratory accredited under the International Laboratory Accreditation Cooperation (ILAC) in accordance with ISO/IEC 17011.
• The manufacturer’s brand/identification mark and model/type shall be printed on the mobile cellular device in indelible ink, readily visible and legible.
• Unless otherwise advised by the Authority, when seeking for Type approval, a Vendor shall submit a sample of the mobile cellular device. The Authority shall not be under obligation to return the sample to the Vendor.

Various labeling and conformity requirements are also set out which include:

• Manufacturer’s brand/identification mark and model/type must be visibly and legibly printed on the device.
• Devices must have a unique International Mobile Station Equipment Identity (IMEI) assigned by GSMA.
• Devices must comply with IMEI security requirements of digital cellular telecommunications system (Phase 2+); mobile station (MS) conformance specification; Part 1: conformance specification (3GPP TS 51.010-1).

Other requirements mandated in the Guidelines consist of:

• External Features: Devices must be equipped with a wired or wireless earpiece facility with an alphanumeric keypad.
• Battery and Power Requirements: Batteries must offer at least 8 hours talk-time and 24 hours standby time and must be fitted with a suitable power supply cord and mains plug that meets the standards established by the regulatory body in charge of electricity in Kenya.
• Radiation Safety, SAR and Health: Devices must comply with certain specified radiation safety standards and any other standard adopted internationally on radiation safety.
• Technical requirements: Devices must comply with the specified requirements relating to operating frequencies and radio interfaces.

 

Mexico 墨西哥

2021年3月1日，墨西哥經濟秘書處發佈公告: DGN 418.01.2021.572，澄清NOM-208-SCFI-2016證書必須頒發給備案進口商的要求。 從2021年3月3日開始，驗證機構必須通過標準證書系統 (http://www.normas-aduanas.gob.mx/normas-Aduanas/) 共享證書資訊。 當前證書將一直有效直到它們過期，並且即使將其簽發給進口商以外的其他人也將被接受。

On 1 March 2021 the Mexican Secretariat of Economics published Bulletin DGN 418.01.2021.572 to clarify the requirement that NOM-208-SCFI-2016 certificates must be issued to the importer of record.

From 3 March 2021 the Certification Bodies must share the certificate information through the Standards Certificate System, http://www.normas-aduanas.gob.mx/normas-Aduanas/

Current certificates will be valid until they expire, and will be accepted even if they were issued to someone other than the importer.

 

Mexico 墨西哥

IFT發佈針對57~64 GHz頻段的公眾諮詢。

The Instituto Federal de Telecomunicaciones (IFT) has opened a public consultation for the 57–64 GHz frequency band. Comments may be submitted to IFT until 20 April 2021 via mail to planeacion.espectro@ift.org.mx.

Subject to this public consultation is the amendment of the technical conditions for motion sensors as well as the management of efficient use of the radioelectric spectrum in the 57–64 GHz band.

Furthermore, IFT would like to increase the harmonization in the use of the radio electric spectrum for motion sensors in this band and encourage technological modernization in the country by granting access to the spectrum for testing and examination of new apparatus or technologies.

By this public consultation, IFT would like to encourage competition for the 57–64 GHz band for further development.

Source: http://www.ift.org.mx/industria/consultas-publicas/acuerdo-mediante-el-cual-el-pleno-del-ift-actualiza-el-acuerdo-mediante-el-cual-el-pleno-del

 

Pakistan 巴基斯坦

[法規草案] PTA公佈2021版型式驗證新規草案。

Pakistan Telecommunication Authority (PTA) has enacted new Type Approval regulations 2021 which include below key changes:

1. Changes to the exempt devices list

The new list contains only the below exempt categories:

1- Networking equipment (switches, firewalls, servers, storage devices)

2- Laptops/desktops (non-sim based only)

3- GPS only devices

As a comparison, below two categories previously exempt have now been removed from the exempt list:

1- Tablet PC with Wifi only Functionality (Non-Sim based devices)

2- Smart watches with Bluetooth/Wifi functionality only (Without Sim or tracking features)

It is critical to highlight that given these changes, all Wifi, Bluetooth and RFID equipment will now require Pakistan Type Approval.

Please note that SRDs are already subject to Pakistan Type Approval.

1. Ultra Wide Band Devices

Ultra Wide Band devices have now been formally added as a device category requiring Type Approval in Pakistan.

2. Inclusion of 62368 Safety standards

62368 Safety standards are now included in the list of acceptable testing standards.

 

South Africa 南非

自2021年4月1日起，NRCS接受SANS/IEC 62368-1的報告發證。該決定的官方法規VC 8055仍在審核中，審核結束後將立即發佈。

While the process of amending VC 8055 to refer to the newly adopted standard is still underway, the NRCS – CEO has approved the recognition of SANS/IEC 62368-1 as an equivalent standard to SANS/IEC 60065 and SANS/IEC 60950. This therefore means, effective 1st April 2021, the Electrotechnical Business Unit of the NRCS, accepts Test Reports that refer to SANS/IEC 62368-1 without issuance of a declaration of equivalence by applicants.

 

Thailand 泰國

泰國國家廣播電視委員 (NBTC) 於2021年3月11日發佈適用於無人飛行器 (UAV) 的新技術標準NBTC TS 1038-2564。新標準於2021年3月12日生效。

On March 11, 2021 the National Broadcasting and Telecommunications Commission (NBTC) of Thailand released the New Technical Standard NBTC TS 1038-2564 applicable to Unmanned Arial Vehicle (UAV).

It was already allowed the use of some frequencies (433.05 – 434.79MHz, 2400 – 2500MHz, 5725 – 5850MHz) for UAVs, through SdoC application.

However, this new standard introduces the use of freq. 24.05 – 24.25GHz range for this type of products and under NBTC Class A type approval. With a permitted maximum output power of 100 mW EIRP.

Summarizing:

The new standard became effective on March 12, 2021.

 

Turkey 土耳其

3月25日，土耳其工業技術部在官方公報上發佈了共14篇有關生態設計和能源標章的公報，以期進一步將歐盟立法轉化為國家法律。 公報中有9項基於《土耳其能源相關產品生態設計法規》，而5項基於《能效標章框架法規》。這些公報於2021年3月25日生效。

On 25 March, the Turkish Ministry of Industry and Technology published a total of 14 Communiqués on ecodesign and energy labelling in the Official Gazette in an effort to further transpose EU legislation into national law.

9 of the Communiqués are based on the Turkish Regulation on Ecodesign of Energy Related Products whilst 5 are based on the Regulation on Framework for Energy Efficiency Labelling.

The 14 Communiqués consist of the following:

Based on Regulation on Ecodesign of Energy Related Products:

• Ecodesign Requirements of Household Dishwashers (2019/2022/EU) (SGM: 2021/1)
• Ecodesign Requirements for Household Washing Machines and Washer-Dryers (2019/2023/EU) (SGM: 2021/3)
• Ecodesign Requirements for Electronic Displays (2019/2021/EU) (SGM: 2021/5)
• Ecodesign Requirements for Refrigerating Appliances (2019/2019/EU) (SGM: 2021/7)
• Ecodesign Requirements for Refrigerating Appliances with a Direct Sales Function (2019/2024/EU) (SGM: 2021/9)
• Ecodesign Requirements for Standby, Off and Networked Standy Mode Electric Power Consumption of Electrical and Electronic Household and Office

Equipment(2008/1275/EC) (SGM: 2021/13)

• Ecodesign Requirements for Computers and Computer Servers (2013/617/EU) (SGM:2021/14)
• Ecodesign Requirements for Servers and Data Storage Products (2019/424/EU) (SGM: 2021/15)
• Ecodesign Requirements for Welding Equipment (2019/1784/EU) (SGM: 2021/17)

Based on Regulation on Framework for Energy Efficiency Labelling:

• Energy Labelling of Household Dishwashers (2019/2017/EU) (SGM: 2021/2)
• Energy Labelling of Household Washing Machines and Household Washer-Dryers (2019/2014/EU) (SGM: 2021/4)
• Energy Labelling of Electronic Displays (2019/2013/EU) (SGM: 2021/6)
• Energy Labelling of Refrigerating Appliances (2019/2016/EU) (SGM: 2021/8)
• Energy Labelling of Refrigerating Appliances with a Direct Sales Function (2019/2018/EU) (SGM:2021/10)

All these Communiqués entered into force on 25 March 2021.

 

Ukraine 烏克蘭

烏克蘭部長內閣於2021年3月10日通過2021年第195號決議，該決議涉及國家合格標章誌的描述和適用規則。合格標章誌可以是平面的，並用兩種對比色製成，也可以壓花並用一種顏色製成。 由於其應用的技術特點，合格標章誌也可能偏離規定的比例，最高可達20%。第195號決議於2021年3月13日生效。

On 10 March 2021, the Ukrainian Cabinet of Ministers adopted Resolution No. 195 to amend Resolution No. 1184 regarding the description and application rules of the national mark of conformity.

Marks of conformity may now be flat and made in two contrasting colours or they may be embossed and made in one colour. Marks of conformity may also deviate from the prescribed proportions up to 20% due to the technological features of its application.

Resolution No. 195 entered into force on 13 March 2021.

 

Uzbekistan 烏茲別克

2021年1月30日，烏茲別克內閣發佈了必須在烏茲別克共和國驗證的合格評定物件清單: https://lex.uz/ru/docs/-5249376#-5250580

該決議於2021年5月1日生效。

On 30 January 2021 the Cabinet of Ministers of Uzbekistan issued the list of objects of conformity assessment which must be certified in the Republic of Uzbekistan: https://lex.uz/ru/docs/-5249376#-5250580

Appendix 1: List of products and wastes subject to obligatory ecological certification.

Appendix 2: List of products under the control of the State Veterinary Service of the Republic of Uzbekistan.

Appendix 3: List of products that meet the sanitary-epidemiological conclusion.

Appendix 4: List of products for which compliance with the requirements of regulatory documents in the field of technical regulation is mandatory.

The Resolution becomes effective on 1 May 2021.

 

Uzbekistan 烏茲別克

2020年11月20日，烏茲別克內閣批准第737號決議，其中規定了某些類型產品的強制性數字碼辨識標記要求(https://www.lex.uz/pdfs/5118476)。該決議於2021年11月21日生效。

On 20 November 2020, the Cabinet of Ministers of Uzbekistan approved Resolution No. 737 introducing mandatory digital identification marking requirements for certain types of products.

Annex I to this Resolution contains the list of product types, identified by their customs tariff codes, for which mandatory digital marking will be required starting from 2021-2022.

Mandatory digital identification marking will be required for certain appliances identified under the following custom tariff codes: 8403 ; 8404 ; 8405, 8414, 8415, 8416, 8418, 8419, 8422, 8423, 8424, 8450, 8508, 8509, 8510, 8513, 8516, 8518, 8519, 8521, 8522, 8525, 8527, 8528.

The date from which the digital identification mark shall be affixed to the above types of appliances is to be determined by the Cabinet of Ministers.

Annex 2 contains a roadmap of regulatory changes that will have to be implemented by responsible government bodies to enforce the requirements of this Resolution.

This Resolution came into force on 21 November 2021.

https://www.lex.uz/pdfs/5118476

 

Vietman 越南

越南資訊通信部 (MIC) 正式發佈一些新標準，這些新標準將於2021年7月1日生效。

此外，還有一些新標準仍在草擬中，並將在不久的將來生效。

The Ministry of Information and Communication (MIC) Vietnam has officially issued several new standards which will take effect from July 01, 2021.

Below are the new standards and equivalences for reference:

– QCVN 54:2020/BTTTT (local RF standard for Wifi 2.4GHz) – equivalent to ETSI EN 300 328 v2.2.2

– QCVN 63:2020/BTTTT (local standard for DVB-T2 function)

– QCVN 74:2020/BTTTT (local RF standard for SRD 1-40GHz) – equivalent to ETSI EN 300 440 V2.2.1

– QCVN 101:2020/BTTTT (local safety standard for lithium battery) – equivalent to IEC 62133:2017

– QCVN 117:2020/BTTTT (local RF standard for 2G, 3G, 4G functions)

– QCVN 122:2020/BTTTT (local RF standard for LPWAN 920-923MHz) – equivalent to ETSI EN 300 220-1 V3.1.1

These new standards will take effect from July 01, 2021. From that date, the local importer has to use the local test report, type approval certificate under the new standards for the importation process. 

Besides, there are also some new standards which are still in draft and will take effect in the near future:

1) National technical regulation on radio access equipment (Wi-Fi) in the 5 GHz band: QCVN 65:2021/BTTTT will take effect on July 01, 2022

2) National technical regulation on radar equipment operating in the band 76 GHz to 77 GHz for ground transport: QCVN 124:2021/BTTTT, the effective date is not fixed yet.

3) National technical regulation on short range radio equipment in the frequency band 40 GHz to 246 GHz: QCVN 123:2021/BTTTT, the effective date is not fixed yet.

4) National technical regulation on 5G mobile communication base station equipment – Radio access section.: QCVN 128:2021/BTTTT will take effect on July 15, 2021

5) National technical regulation on the quality of Internet access services on 5G terrestrial mobile networks.: QCVN 126:2021/BTTTT will take effect on August 15, 2021

6) National technical regulation on 5G mobile communication terminal equipment – Radio access section.: QCVN 127:2021/BTTTT will take effect on August 15, 2021

Now, MIC is getting the public comments for these draft standards. 

 

家用電器 Household Appliances

Brazil 巴西

2021年3月25日，巴西國家計量，標準化和工業品質研究所 (INMETRO / CONMETRO) 發佈第144號條例，批准技術品質法規，並確立製造與進口離心式乾衣機必須滿足的合格性評估和技術要求。該條例於2021年4月1日生效。

On 25 March 2021, Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 144 to approve the Technical Quality Regulation establishing the conformity assessment and technical requirements to be met by centrifugal clothes dryers that are manufactured, imported, sold or distributed for the Brazilian market.

Article 5 underlines the obligations and responsibilities of entities in the production chain for centrifugal dryers and determines that the national manufacturer and the importer must manufacture and make appliances available in accordance with this Regulation, with other entities in the production and supply chain, physical or virtual, obliged to maintain the integrity of the product and mandatory markings.

The products must bear the ENCE, the National Energy Conservation Label, visible to the consumer, without its visualisation being obstructed by any other information attached by the suppliers.

As for virtual commerce, the site administrator must provide the ENCE and/or the information contained therein in text format on all the pages where the product is offered or displayed, in an ostensible, clear and unequivocal manner together with the image or identification of the product model.

According to Annex I Item 5 all centrifugal clothes dryers available on the domestic market must be permanently marked, both on the product and on the packaging, with the minimum information in Portuguese, including:

• Name, company name and tax identification (CNPJ or CPF) of the national manufacturer or importer;
• Name, company name and fiscal identification (CNPJ or CPF) of the supplier that holds the registration;
• Conformity Identification Seal with the Registration number;
• Trade name of the product;
• Manufacturing date (day, month and year, in this order);
• Identification of the batch or other identification that allows the traceability of the product;
• Country of origin;
• Commercial bar code, for identification of the brand, model and versions of the product.

Per item 6.1, instructions for use must be provided with the appliance so that it can be used safely, including information regarding the mass of dry material for which the appliance is designed and alerts to potential dangers present when the extractors operate by compression.

Suppliers are also required to declare the performance of the device in terms of its centrifugation capacity, cycle time, electricity consumption, centrifugation efficiency and energy efficiency.

Centrifugal dryers manufactured, imported, distributed and marketed shall be compulsorily submitted to conformity assessment through certification, and shall also be registered with Inmetro, which will allow the use of the Conformity Identification Mark on certified products and their availability on the domestic market. The criteria for conformity assessment are detailed in Annex II.

This Portaria will enter into force 01 April 2021.

 

India 印度

《縫紉機 (品質控制) 令,2020》 將於2021年9月1日強制。

DPIIT released “Sewing Machines (Quality Control) Order, 2021”, which shall come into force with effect from the 1st of September 2021 with IS 15449 : Part 1 : 2004.

 

Panama 巴拿馬

2021年3月8日，巴拿馬發佈2021年第28號決議，批准巴拿馬製冷系統標準DGNTI-COPANIT ISO 5149-1：2014。 該標準規定了與安全和環境保護有關的要求，並為製冷系統的運行，維護和修理以及製冷劑的回收建立程序。 該決議自2021年3月8日發佈起生效。

On 08 March 2021, Panama published Resolution No. 28, 2021, that approves the Panamanian Standard DGNTI-COPANIT ISO 5149-1:2014 on refrigerating systems.

The Standard specifies the requirements related to safety and environmental protection and establishes procedures for the operation, maintenance, and repair of refrigerating systems and the recovery of refrigerants.

This Resolution is effective from publication, on 8 March 2021.

 

Taiwan 台灣

[法規草案] 微波爐容許耗用能源基準、標示及檢查方式 (草案)

本公告適用之微波爐，符合60705標準規定，且列入經濟部標準檢驗局應施檢驗品目者。但符合下列條件者不適用本公告:

(一) 負載直徑≤200mm，或負載高度≤120mm的微波爐。

(二) 額定消耗功率＞3300W。

The Taiwan Bureau of Energy intends to draft the ”Requirements on Minimum Energy Performance Standard, Energy Efficiency Indication, and Inspection for Microwave Ovens” to strengthen the energy efficiency supervision and the inspection.

The microwave ovens refer to those meeting the definition

of microwave ovens in CNS 60705 and promulgated by the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) as products requiring inspections.

However, this does not apply to the microwave ovens of the following conditions:

(1) Microwave ovens with diameter of load ≤200mm, or height of  load ≤120mm

(2) Rated power input 3300W

 

燈具 / LED Luminaires / LED

South Korea 韓國

[法規草案] 2021年3月24日，韓國貿易，工業和能源部 (MOTIE) 發佈《高能效設備的促進和供應條例》的修訂草案提案，正在聽取意見中， 該草案主要有意擴大智慧LED照明產品管控範圍，包括單一照明設備 (例如燈和燈具)。

On 24 March 2021, the South Korean Ministry of Trade, Industry and Energy (MOTIE) issued a draft amendment to the Regulation on Promotion and Supply of High Energy Efficient Equipment.

The draft primarily expands the scope of products subject to certification of smart LED lighting to include single lighting equipment, such as lamps and luminaires.

These include LED lamps with built-in converter for general lighting that are capable of dimming control for energy saving through wired/wireless communication at AC 220 V, 60 Hz, and apply an integrated LED light source and the base specified in KSC 7651.

Luminaires with integrated or built-in LED light source that are capable of dimming control for energy saving by wired/wireless communication at AC 220 V, 60 Hz are also in scope.

The draft also establishes provisions that allow non-face-to-face factory inspections in cases where site visits are difficult due to infectious diseases, etc., and alignes the reference standards and terminology of luminaires and LED lamps with the revised KS standards.

 

South Africa 南非

[法規草案] 2021年4月8日，WTO發佈了關於強制性規範草案的G / TBT / N / ZAF / 244號通知，該規範涵蓋了各種形狀和飾面的普通定向照明和非定向照明的能效和性能； 使用白熾燈，鹵素燈，螢光燈，發光二極體 (LED) 和其他光源技術 (不包括高強度放電燈) 。WTO通報截止日期為2021年6月7日，即通報發出後的60天。

On 8 April 2021, the WTO published Notification G/TBT/N/ZAF/244  regarding a draft compulsory specification which covers the energy efficiency and functional performance for general lighting directional and non -directional lamps of all shapes and finishes; using incandescent, halogen, fluorescent, light emitting diode (LED), and other light source technologies (not including high- intensity discharge lamps).

The WTO Notification Deadline is 7 June 2021, 60 days from notification.

 

電池 Battery

China 中國

[法規草案] 2021年3月31日，國家市場監管局 (SAMR) 通知WTO，GB 31241-2014正在修訂中。該標準草案僅考慮鋰離子電池和電池組的基本安全要求，例如漏液，著火，爆炸和過熱，以提供安全保護，而不會涉及性能和功能特性。

On 31 March 2021, the State Administration for Market Regulation (SAMR) notified the WTO that GB 31241-2014 was undergoing revision. The draft standard would only consider the basic safety requirements of lithium-ion batteries and battery packs such as leaking liquid, fire, explosion and overheating to provide safety protection, without involving performance and functional characteristics.

In furtherance of the production of safe products, when determining which design scheme to use for a battery or battery pack, the following priorities must be observed:

—materials with high safety, and avoiding the use of materials that are prone to thermal runaway;

—if the above principles cannot be implemented, then protection devices need to be designed to reduce or eliminate the possibility of danger;

—if none of the above schemes and other measures can completely avoid the occurrence of dangers, measures to identify and explain the remaining dangers should be taken.

The draft applies to lithium-ion batteries and battery packs used in portable electronic products. Examples of portable electronic products that fall within scope are as follows:

a) Portable office products: notebook computers, tablet computers, etc.;

b) Mobile communication products: mobile phones, cordless phones, walkie-talkies, etc.;

c) Portable audio/video products: portable TVs, portable audio/video players, cameras, camcorders, voice recorders, Bluetooth headsets, portable speakers, etc.;

d) Other portable products: electronic navigators, digital photo frames, game consoles, e-books, mobile power supplies, portable energy storage power supplies, portable projectors, wearable devices, etc.

Note however that the list above is indicative and not exhaustive, such that products not listed are not necessarily outside the scope of the draft standard.

General safety requirements can be read in Section 5, with various testing procedures outlined in further sections.

The WTO is accepting comments on the proposal until 30 May 2021.

 

Vietnam 越南

越南將於2021年7月1日使用電池新標準: QCVN 101:2020/BTTTT。

越南市場上銷售的用於筆記型電腦、平板、智慧手機這三類終端產品裡的鋰電池必須按照新的技術法規QCVN 101：2020 / BTTTT更新測試報告，以確保認證有效性。對於之前已經簽發的報告，如果客戶在法規更新後仍出售這類產品的電池，是需要重新送樣到越南測試取得新標準的報告才能繼續銷售。

From July 1st, 2021, new standard for lithium battery (QCVN 101:2020/BTTTT) will replace the existing standard (QCVN 101:2016/BTTTT).

After this update, all batteries used for mobile phone, tablet & notebook, will need to get test report according to new standard to import to Vietnam.

 

能源效率要求 Energy Efficiency Requirements

Argentina 阿根廷

由於缺乏公認的具有測試能力的驗證機構和實驗室，阿根廷於2021年3月5日發佈第208/2021號決議，中止關於電動水泵能效標籤技術要求的第800/2019號決議的有效性。該決議將從2021年3月7日開始，並持續365個行政工作日。

On 05 March 2021, the Argentine Ministry of Productive Development published Resolution No. 208/2021 in order to suspend the validity of Resolution No. 800/2019 on technical requirements for energy efficiency labelling of electric water pumps.

The suspension, which is due to due to a lack of recognised certification bodies and laboratories with testing capacity, will be for 365 administrative business days, starting from 7 March 2021.

This Resolution entered into force on 5 March 2021.

 

China 中國

[法規草案] 2021年4月8日，WTO發佈G / TBT / N / CHN / 1586號標準草案通知，規定能效等級，能效的最小允許值以及台式微型電腦，具有顯示功能的集成台式微型電腦 (例如一體機) 和可擕式電腦 (以上統稱為微型電腦) 的測試方法。 該文件一旦獲得批准，將取代GB 28380-2012《微型電腦的極限值和能效等級》。 WTO通報截止日期為2021年6月7日，即通報後的60天。

On 8 April 2021, the WTO published Notification G/TBT/N/CHN/1586 regarding a draft standard specifies the energy efficiency grades, minimum allowable values of energy efficiency and test methods of desktop microcomputers, integrated desktop microcomputers with display function (referred to as all-in-one computers) and portable computers (all above collectively referred to as microcomputers).

This document will replace GB 28380-2012 “Limited Values ​​and Energy Efficiency Grades of Microcomputers” once approved.

The WTO Notification Deadline is 7 June 2021, 60 days from notification

 

China 中國

[法規草案] 2021年4月7日，中國標準化管理總局 (SAC) 和中國國家市場監督管理總局 (SAMR) 向世界貿易組織通報了伺服器的能效和能效等級的最低允許值。 該標準規定了能效等級，能效的最小允許值，伺服器的測試和計算方法。WTO通知截止日期為2021年6月6日，距通知發出60天。

On 7 April 2021, the China Standardization Administration (SAC) and the China State Administration for Market Regulation (SAMR) notified the WTO on Minimum allowable values of energy efficiency and energy efficiency grades for servers.

The Standard specifies the energy efficiency grade, minimum allowable values of energy efficiency, testing and calculation methods for servers.

This Standard is applicable to 1-way and 2-way general-purpose tower and rack servers. Elastic servers, computer servers with integrated auxiliary processing accelerator, full fault-tolerant servers, storage equipment (including blade storage) and network equipment are excluded from scope.

By way of transition, products shipped or imported before implementation may continue to be sold for a period of 12 months.

The WTO Notification deadline is 6 June 2021.

 

Malaysia 馬來西亞

Malaysia Suruhanjaya Tenaga (ST) 公告自2021年3月01日起對冰櫃實施能效MEPS要求。自2021年3月1日起尚有過渡期一年，容積不超過320 L的臥式實心門冰櫃如要進口販賣至馬來西亞，於2022年3月1日後必需符合能源效率要求。

Malaysia Suruhanjaya Tenaga (ST) announced the enforcement of Minimum Energy Performance Standards (MEPS) to Freezer on 1st March 2021. This requirement was enforce by 1st of March 2021 with a grace period of 1 year. By 1st March 2022 all freezers that are exported to Malaysia will need to comply with this requirement.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

China 中國

2021年3月18日，中國國家認證認可監督管理委員會 (CNCA) 批准了關於整合強制性產品驗證單位和程式的通知。 該通知發送給指定的強制性產品驗證機構，旨在簡化程式並減少申請驗證的時間和成本。

On 18 March 2021, the Certification and Accreditation Administration of China (CNCA) approved a notice on integrating compulsory product certification units and procedures.

This notice, addressed to designated certification bodies for compulsory product certification, aims to simplify procedures and reduce the time and cost of applying for certification.

Certificate holders can choose to combine CCC certificates. The procedures for making changes to certificates shall be simplified, and the declaration of changes which do not affect product safety is not required.

 

Colombia 哥倫比亞

2021年3月26日，哥倫比亞礦業和能源部批准第40099號決議，關於終端電氣和燃氣設備標籤技術法規 (RETIQ)，涉及空調等產品。該修正案於2021年3月26日生效。

On 26 March 2021, Colombian Ministry of Mines and Energy approved Resolution No 40099 to amend Resolution No 41012/2015 on Technical Regulation for Labelling of End-Use Electrical and Fuel Gas Equipment (RETIQ).

In order to improve the implementation of the RETIQ, this amendment includes examples of labels for precision-type air conditioners and for multiple outlet system condensers and, also, updates a number of label examples included in the Resolution 40247 of 2020 to show how the final label would look.

This amends the fifth paragraph of article 22 on the transitional nature of the entry into force of equipment included for the first time in the regulation regulatory scope. It states that where new equipment is added, a transitional period of one year will be provided in order for the equipment to comply unless otherwise stated in the text.

The application of Standard ISO 16358-1: 2013 as a mandatory standard for testing the sound pressure level in air conditioners is suspended until the Ministry carries out a study on possible alternatives and until it is guarantees that technical tools are available for the correct implementation of this standard. This amendment suspends the entry into force of the requirements in Article 8 for Air Conditioner with Cooling Capacity > 10,540 and up to 17,580 watts.

The Ministry must also prepare a regulatory impact analysis to establish whether motor pumping equipment should be included in the scope.

This amendment entered into force on 26 March 2021.

 

Philippines 菲律賓

[法規草案] 針對4項產品 (空調、冰箱、電視、燈具) 的菲律賓能源標籤計畫 (PELP) 指南。

Pursuant to Sections 15 and 16 of the Energy Efficiency and Conservation (EE&C) Act, the Department of Energy (DOE) issued the Department Circular No. (DC) DC2020-06-0015 or the Philippine Energy Labelling Program (PELP) Guidelines, which mandates that all importers, manufacturers, distributors and dealers of electrical appliances shall provide information, particularly on Energy-Consuming Products (ECPs) such as air conditioners, refrigerating appliances, television sets, and lighting products (Compact Fluorescent Lamps, Linear Fluorescent Lamps, Single-Capped Fluorescent Lamps, Lamp Ballasts, Light Emitting Diodes), to promote the use of energy efficient products and help guide consumers in making informed choices at the point of sale.

The Energy Utilization Management Bureau of the DOE has drafted the implementing guidelines (IG) for PELP, which includes the Particular Product Requirement (PPR), Code of Practice (COPE) and other technical requirements for the four (4) ECPs covered by PELP, as well as the guidelines for PELP registration, Enforcement, Monitoring and Verification (EMV), and compliance mechanism. After the presentation of the refined IG during the recently concluded 2nd virtual public consultation held last 26 February 2021, the DOE is again open for additional inputs and recommendations from the stakeholders on the following proposed Implementing Guidelines:

• Draft PELP IG for Air Conditioners
• Draft PELP IG for Refrigerating Appliances
• Draft PELP IG for Television Sets
• Draft PELP IG for Lighting Products
• Draft PELP IG for Registration, Enforcement, Monitoring, Verification and Compliance Mechanism

 

Vietnam 越南

越南科學和工業部於2020年12月30日發佈第10/2020 / TT-BKHCN號通知函，關於使用代碼和二維碼的實施措施，該通知函定於2021年4月1日生效。

This Circular, issued by the Vietnamese Ministry of Science and Industry on 30 December 2020, provides details on measures to implement the provisions of the Product and Goods Quality Decree No. 132/2008/ND-CP relating to the use of codes and barcodes by products, services and organisations.
This Circular describes the obligations of individuals and organisations that use codes and barcodes and the procedure for issuing Code and Barcode Use Right Certificates.

The attribution of codes and barcodes is subject to compliance with the provisions of Decree No. 132/2008/ND-CP relating to the control of product and goods quality.

Certificates may only be granted to applicants who register and submit the requested information to the one-stop-shop department of the General Department of Standards, Metrology and Quality or the online database of the National Public Service Portal of the Ministry of Science and Technology.

Code and barcodes shall be printed on the product and its packaging to ensure compliance with International standards ISO/TEC 15426-1 and ISO/IEC 15426-2.

The Circular further provides that organisations or individuals whose certificates were issued before 1 July 2018 have until 1 April 2024 to register for a new certificate in accordance with the provisions of this Circular.

This Circular is scheduled to enter into force on 1 April 2021.

資訊 / 電信 ITE / Telecom

Brazil 巴西

2021年2月26日，ANATEL發佈了第1306號法案。該新法案對第14448號法案 (評估受限輻射設備合格評定的技術要求) 進行更新，將Wi-Fi 6E技術要求納入了5,925-7,125 MHz的頻率範圍 (項目11.7)。

On February 26, 2021, ANATEL released the Act nº 1306. This new Act updates Act 14448 (Technical Requirements For Assessing Conformity Assessment of Restricted Radiation Equipment) to include the Wi-Fi 6E technical requirements in the frequency range of 5,925-7,125 MHz (Item 11.7).

 

Botswana 波札那

波札那通信監管局 (BOCRA) 正在準備有關支援SIM卡設備的形式認證批准新指南。這些準則將於2022年1月1日生效。

The Botswana Communications Regulatory Authority (BOCRA) is preparing New Guidelines on Type Approval Verification of SIM-enabled devices.

These guidelines will come into effect on January 1, 2022, with the aim to:

• Protect both the ICT networks and the consumers.
• Ensure that only registered devices are used in public networks.

After this date, devices that support SIM function (WWAN devices connected to Network operators) will be required to complete:

1.The type approval registration process.

2.Register their IMEI in the BOCRA database.

For the IMEI registration below information is required:

a.Device Brand and Model.

b.IMEI/TAC number.

c.BOCRA Type Approval ID Number.

Upon successful completion of the verification process, compliant devices will be given access to the network. For non-compliant devices, a notification message will be sent to the individual devices. The non-compliant devices will be denied access to the network until completing the process.

 

Bhutan 不丹

不丹資訊和媒體管理局 (BICMA) 最近發布修訂後的《規則與條例》(NRRR-2021)，該條例於2021年1月1日生效並廢除《 2011年國家無線電規則》。

The Bhutan InfoComm and Media Authority (BICMA) has recently published the revised Rules and Regulations (NRRR-2021) which came into effect on 1st January 2021.

The National Radio Rules 2011 was repealed by the above Rules and Regulations.

BICMA has also released its National Radio Frequency Allocation Plan 2021 (NRFAP-2021).

 

China 中國

[法規草案] 2021年2月19日，中國工業和資訊化部 (MIIT) 提出《無線充電設備 (輸電) 無線電管理的暫時規定》。 該法規草案旨在規範無線充電設備的使用，以避免對各種合法開發的無線電服務產生有害干擾。該提案開放徵求意見直至2021年3月20日。

On 19 February 2021, the Chinese Ministry of Industry and Information Technology (MIIT) proposed Interim Provisions on Radio Management of Wireless Charging Equipment (Power Transmission).

This draft regulation aims to regulate the use of wireless charging equipment to avoid harmful interference to all kinds of legally developed radio services.

The wireless charging referred to in this draft regulation refers to the use of magnetic induction, magnetic resonance, and capacitive coupling to realize near-field power transmission technology from the power source to load. Wireless charging equipment is non-radio equipment that radiates radio waves.

The regulations related to micro-power short-range radio transmission equipment do not apply to wireless charging devices.

This draft regulation applies to wireless charging equipment for mobile, portable and electric vehicles (including motorcycles).

The mobile and portable wireless charging equipment should work in the frequency bands of 100-148.5kHz, 6765-6795kHz, 13553-13567kHz, and the rated transmission power should not exceed 50W. The wireless charging equipment for electric vehicles with a rated transmission power greater than 22kW but not more than 120kW should work in the 19-21kHz frequency band, and the one with a rated transmission power not exceeding 22kW should work at 79- 90kHz frequency band.

In accordance with Article 9, the instructions of wireless chargers need to provide certain information, including product name, model, special identification, rated transmission power, operating frequency range, usage scenarios or usage conditions, disabled area for wireless charging devices, usage extreme environmental conditions, etc.

Companies that produce or import wireless charging equipment are encouraged to use voluntary certification to ensure quality, they are also encouraged to add or display special labels for wireless charging equipment before leaving the factory or before entering China.

This draft regulation proposed that from 1 January 2022, the wireless charging equipment sold and used in China shall comply with these regulations, and the wireless charging devices that have been put into use before the publication of this regulation, can in principle be used until they are scrapped.

The proposal is opened to comments from interested parties until 20 March 2021.

 

Jordan 約旦

約旦電信管理委員會發佈電信和終端設備的技術規則，標準和規範清單。這些標準和規範是強制性的，範圍內的電信產品需獲得型式認可證書才可被允許進入約旦。

In February 2021, the Jordanian Telecommunications Regulatory Commission issued a list of technical rules, standards, and specifications for telecommunications and terminal equipment.

These standards and specifications are mandatory to obtain a type approval certificate and to allow telecommunications equipment into the Kingdom. The list covers a range of areas including radio frequency, electromagnetic compatibility (EMC), public health and safety, the environment, and restricting the use of hazardous substances (RoHS) for one hundred and forty types and classes of devices.

The list includes specifications for devices that use the following technologies, among others:

• 2G, 3G, and 4G technologies,
• WLAN technology,
• RFID technology,
• PSTN technology,
• Short-range devices (SRD),
• Global Navigation Satellite Systems (GNSS).

Based on Article 5C of Decision No. 9-1/2020 on Type Approvals for Wired and Wireless Telecommunication Equipment, any company that aims to obtain a type approval certificate must provide the Commission with technical test reports issued by a testing laboratory. Those should include reports on radio frequency, EMC, Safety, and SAR evaluation, which prove the devices conform to the technical rules, standards, and specifications for telecommunications and terminal equipment.

 

Malaysia 馬來西亞

馬來西亞標準與工業研究協會 (SIRIM) 將針對通訊產品及多媒體產品未隨貨提供的適配器實施申報通知，以確保產品不與適配器一起販售時，兩者都能符合法規要求。另宣佈自2021年3月1日起，申請型式認證時需提供一份聲明 — 不與通訊和多媒體產品一起提供以茲驗證的適配器聲明 (範本由SIRIM提供)。

Malaysia SIRIM announced the implementation of the declaration for adaptors that would come into force from March 1, 2021. All applicants of Type Approval are required to provide a declaration letter from the Principal or Manufacturer and submit it together with each Type Approval application.

The declaration letter shall follow the template provided by SIRIM, namely the  DECLARATION FOR ADAPTOR NOT SUPPLIED TOGETHER WITH COMMUNICATIONS AND MULTIMEDIA PRODUCT TO BE CERTIFIED. The necessary details to be declared:

i)   The regulatory model or marketing name and brand name of the product to be sold on its own without an adaptor

ii)  The model name of the compatible adaptor(s) for the product specified above

iii) The Certificate Holder’s obligation to obtain a Certificate of Approval (CoA) from the Energy Commission (Suruhanjaya Tenaga) and to affix the SIRIM-ST label on the adaptors

 

Mexico 墨西哥

根據2021年2月25日生效的墨西哥聯邦電信機構 (IFT) 所發佈的新的合格評定程式 (PEC)，公布了四種驗證類型，同時規定涵蓋電信產品的合格證書 (CoC) 將不再可轉讓，並且各個組件獲得的證書不能擴展至最終產品。因此，墨西哥的每個電信產品進口商，分銷商或賣方都必須獲得自己的技術標準NOM CoC，以及所需的後續IFT批准。

Under a new Conformity Assessment Procedure (PEC) issued by the Mexican Federal Telecommunications Institute (IFT), effective February 25, 2021. PEC establishes four certification schemes according to the needs of the applicant, and product categories:

(i) sample by product models for a single lot;

(ii) sample by product models, and oversight for more than one lot;

(iii) sample per model family, and oversight;

(iv) sample by telecommunications or broadcasting device, and oversight.

Remark: “oversight” procedure means the Accredited Certification Body must carry out compliance monitoring visits in warehouses and points of sale owned or leased by the CoC owner.

Below are the key points for the New Conformity Assessment Procedure (PEC):

With the new PEC regulation, the certificate of conformity, test report, and expert opinion become non-transferable. Their holder is required to be the Real Importer. This allows the authority have greater traceability regarding the ownership.

After February 25 it is not possible to obtain approval of the module. Then, when a host product integrates a module that did not obtain IFT approval before, the host product will require to be certified.

Products can be certified as a family, considering that: Family is a group of models of a product intended for telecommunications, with the same brand, in which the variants between them are about aesthetic or appearance, but keeps the same technical characteristics (card for the transceiver/transmitter with the same RF path, chips, components, antenna(s), frequency(s) and technology(s) of operation) and the same functionalities. The user manual for each product model that is part of the family must show the same functionalities.

The HS code of the product must be provided directly by the customer. The customs authority in Mexico requires an 8-digit HS code. The HS Code information is very sensitive, please suggest the clients verify it first with the Mexican importer.

The regulation applies to devices subject to the following standards:

NOM-196-SCFI-2016 (IFT-004-2014)

NOM-208-SCFI-2016 (IFT-008-2015)

NOM-218-SCFI-2017 (IFT-005-2016)

NOM-221/2-SCFI-2018 (IFT-011-2017)

 

Mexico 墨西哥

2021年2月26日，有關比吸收率 (SAR) 測試和驗證的新技術標準IFT-012-2019正式生效。符合規範的先前驗證的設備必須符合新法規，並且測試只能在墨西哥當地認可實驗室完成。

On February 26, 2021, the new technical standard IFT-012-2019 for Specific Absorption Rate (SAR) testing and certification entered into force.

IFT-012-2019 applies to products, equipment, or devices with a radio frequency transmitter or transceiver, that make use of radio spectrum or connect to a telecommunications network in the frequency range from 30 MHz to 6 GHz and which are used:

Near the head, particularly close to the ear, in the frequency range of 300 MHz to 6 GHz, and/or at a distance equal to or lesser than 200 mm from the human body, in the frequency range from 30 MHz to 6 GHz.

Please note that previously certified devices that fall under the aforementioned specifications must comply with the new regulations and that the testing can exclusively be done by an Accredited Certification Body located in Mexico.

 

Thailand 泰國

2021年3月2日，TISI公佈新法規TIS 1195-2561。 寬限期為180天。 2021年8月29日之後，根據舊標準TIS1195-2536頒發的所有產品證書將被自動撤回。新標準TIS1195-2561適用於家用，類似用途的音訊，視頻和類似電子設備。

On March 2, 2021, TISI announced in the Royal Gazette new regulation TIS 1195-2561. There is a grace period of 180 days. After August 29, 2021, all product certificates issued under the old standard TIS1195-2536 will be automatically withdrawn.

New standard TIS1195-2561 applies to audio, video, and similar electronic apparatus intended for household and similar general use. Tentative products under mandatory scope are TV, speaker, game console, and its power supply adapter. For products such as video projector, video camera, CCTV camera, tape recorders, external hard disk drive, CD writer, LED/LCD monitor, Wi-Fi router, TISI has not concluded yet if they are under the mandatory scope. 

 

Saudi Arabia 沙烏地阿拉伯

沙烏地阿拉伯標準局 (Saudi Standards, Metrology and Quality Organization, SASO) 預計自2021年7月1日起增加最新的IECEE認證之管控範圍。管控清單上的產品皆需要申請取得SASO IECEE Recognition Certificate (簡稱SIRC證書)。

On 10 March 2021, the Saudi Organization for Standardization, Metrology, and Quality SASO announced that obtaining the IECEE national recognition certificate for some electrotechnical products is becoming mandatory starting from 1 July 2021.

The NEW products covered by this announcement are:

• Water boilers and kettles
• Coffee makers of all kinds
• Home Electric fryers
• Electric pumps with 5 hp or less
• Power cables
• Video game consoles and controllers

SASO clarifies that this requirement shall ensure the protection of the market from counterfeit devices and equipment, and it shall protect the consumers from imported products that do not conform to the standards. It also aims to reduce the accidents that these products may cause, and facilitate the entry of goods through customs ports without the need for repeated inspection and testing.

 

Vietnam 越南

[法規草案] 2021年3月9日，越南資訊通信部發佈關於40 GHz至246 GHz頻率範圍內的短距離無線電設備的國家技術法規草案。

On 9 March 2021, the Vietnamese Ministry of Information and Communications issued a Draft National Technical Regulation on short-range radio equipment in the frequency range of 40 GHz to 246 GHz.

This Draft Regulation applies to general types of radio transmitters and transceivers, operating in the frequency range from 40 GHz to 246 GHz, including:

• radio warning equipment;
• radio remote control equipment;
• magnetic measuring equipment; and
• general data transmission equipment.

The requirements apply to all individuals and companies engaged in the production and trading of applicable devices within Vietnam.

Testing Conditions:

The Draft Technical Regulation contains detailed testing provisions, relating to the appropriate conditions and procedures for testing covered devices in line with the requirements of the Draft Technical Regulation. These provisions relate, inter alia, to the following: environmental conditions for testing; selection of samples for testing; interpretation of measurement results; testing of transmitters; and testing of receivers.

The proposed date of entry into force for this Draft Regulation is 1 January 2022.

The deadline for comments regarding this Draft Regulation is 9 May 2021.

 

RoHS / REACH

Ukraine 烏克蘭

烏克蘭經濟發展，貿易和農業部於2021年1月18日發佈第84-21號命令，確立RoHS認證的最新要求。 從2021年11月18日開始，RoHS認證需符合EN / IEC 63000標準，不再接受EN 50581的要求。 2021年11月18日之前獲得批准的產品不需要更新。

The Ministry of Economic Development, Trade and Agriculture in Ukraine released Order #84-21 on January 18, 2021, which establishes updated requirements for RoHS approvals.  Starting November 18, 2021, to obtain RoHS approval, compliance to EN/IEC 63000 is necessary and compliance to EN 50581 will no longer be accepted.  Products approved before November 18, 2021, do not require updated RoHS approvals. 

 

家用電器 Household Appliances

Taiwan 台灣

[擬議修正案] 台灣標準檢驗局 (BSMI) 提議對電風扇、吸塵器、電動食物研磨機、電動食物攪拌機、電動榨汁機、電燙髮機和電動按摩器具的強制性商品檢規則進行修訂。 擬訂的修正案增加了在檢查範圍內具有二次電池/電池的產品。 擬訂修正案涵蓋的7種產品使用的二次鋰電池/電池應符合CNS 15364：2013以及CNS 62133-2：2018的第7.3.8.1節「振動」和7.3.8.2節「機械衝擊」。

On 19 February 2021, the Taiwan Bureau of Standards, Metrology and Inspection (BSMI) proposed to amend the mandatory commodity inspection rules for electric fans, vacuum cleaners, electric food grinders, electric food mixers, electric juicers, hair perm machines, and electric massage appliances.

This proposed amendment adds products with secondary cells/batteries in the inspection scope.

The secondary lithium cells/batteries used by the 7 products covered by this proposed amendment shall comply with CNS 15364: 2013 and Sections 7.3.8.1 “vibration” and 7.3.8.2 “mechanical shock” of CNS 62133-2: 2018.

The following products will be exempted from the mandatory commodity inspection rules:

• products that only have a USB connection for power supply with an input voltage of DC 5V, without power adapters ,and that are not powered by the secondary battery
• products only charging by automobile power supply with car cigarette lighter adapter and not powered by secondary battery
• products using three-phase voltage or primary battery as power supply only
• toy products that are subject to inspection as announced by BSMI.

According to this proposed amendment, the revised inspection scope will be implemented from 1 January 2023 for imported and domestic products,
Certificates issued before 31 December 2022 will remains valid until their expiry date.

Interested parties can submit their comments on this proposal until April 20, 2021.

 

燈具 / LED Luminaires / LED

Chile 智利

智利電力和燃料監督局 (SEC) 於2020年12月21日發佈了第33810號決議，該決議批准了2020年11月30日關於道路和街道照明安全測試的第5/07：2020號PE議定書。 根據該議定書，該協定將於2022年2月28日生效。從該日期起，本國製造商，進口商和銷售商在其產品商業化之前必須獲得相關的批准證書。 一經生效，將廢除2009年9月23日現有的第5/07號議定書。5/07:2020號PE議定書的主要變化是測試標準升級為： IEC 60598-1:2017, IEC 60598-2-3:2011。

On 21 December 2020, the Chilean Superintendence of Electricity and Fuels (SEC) issued Resolution No. 33810 which approved Protocol PE No. 5/07:2020 of 30 November 2020, on safety testing of road and street lighting.

According to the Resolution, the Protocol will be effective from 28 February 2022. From that date, national manufacturers, importers, and marketers, prior to the commercialisation of their products, must obtain the related Certificate of Approval.

Once in force, the existing Protocol No. 5/07 of 23 September 2009 will be repealed.

From the text of the draft, it emerges that the Protocol would establish the requirements for the safety certification procedures for the following:

Luminaires for road and street lighting and other outdoor public lighting applications, tunnel lighting, overhead column lighting at 2.5 metres or higher, and incandescent fluorescent discharge LED lamps all of which are supplied by 1.000 volts or less and come under the scope of standards IEC 60598-2-3: 2011-1 and IEC 60598-1: 2017-09.

The procedures outlined do not apply to LED luminaires that work solely with photovoltaic energy systems or luminaires to be used exclusively in explosion-proof areas.

Any discrepancies between the draft and the final text, if existing, will be outlined once the Protocol is published.

 

Colombia 哥倫比亞

哥倫比亞礦業和能源部將照明和公共照明技術法規-RETILAP的有效期延長至2023年2月5日。

On 05 February 2021, the Colombian Ministry of Mines and Energy published Resolution No. 40031 to extend the validity of the Technical Regulation for Lighting and Public Lighting – RETILAP, approved by Resolution No. 18040, 2010.

The validity of the RETILAP regulation, including its last revision approved by Resolution No. 40122/2016, has been extended for a further two years.
This Resolution entered into force on 5 February 2021.

 

Vietnam 越南

越南工業部於2020年12月21日發布批准關於螢光燈中汞含量的國家技術法規的45/2020 / TT-BCT號通告的最終版本。該通告函定於2022年7月1日生效。

On 21 December 2020, the Vietnamese Ministry of Industry published the final version of Circular 45/2020/TT-BCT approving the National Technical Regulation on Mercury Content in Fluorescent Lamps.

This Circular governs mercury content in fluorescent lamps and specifies the technical requirements, testing methods, and testing rules.

This proposal applies to enterprises and individuals that manufacture, import or commercialise fluorescent lamps containing mercury, as listed in the Annex to the Regulation.

In accordance with the measures outlined in Section II of the Technical Regulation, the mercury content in fluorescent lamps shall meet the requirements listed in Table 1. Table 1 details a list of fluorescent lamp types and the associated mercury limits, and implements Annex A, Part 1 of the Minamata Convention.

In accordance with the measures outlined in Section III, businesses are obliged to have a certificate of conformity and declaration of conformity before the products are sold on the market. It’s also necessary to have a conformity mark sealed on the products. Businesses would also be required to register the conformity certificate with the Service of Industry and Trade where they are registered.

This Circular is scheduled to enter into force on 1 July 2022.

 

能源效率要求 Energy Efficiency Requirements

Mexico 墨西哥

2021年3月4日，墨西哥在聯邦公報上發布新標準NOM-031-ENER-2019 (街道照明和公共室外區域的LED燈具的能源效率、規格和測試方法)。該標準將在其發布後90天 (約2021年6月3日) 生效。

On 04 March 2021, it was published in the Federal Gazette of Mexico the new standard NOM-031-ENER-2019, Energy efficiency for LED luminaires for street lighting and public outdoor areas. Specifications and test methods. This NOM standard establishes the specifications and test methods that promote the efficient use of energy in luminaires with light-emitting diodes (LEDs), intended for lighting roads and public outdoor areas, which use the electrical energy of the public service, as well as other energy sources, such as cells, batteries, accumulators and self-generation, in alternating current and/or direct current, with a nominal voltage up to 480V in alternating current and up to 100V in direct current.

The standard will enter into enforcement 90 days after its publication (approx. June 3rd, 2021).

 

Mexico 墨西哥

[法規草案] 2021年3月2日在墨西哥在聯邦公報發布標準草案PROY-NOM-034-ENER / SE-2020 (風扇的能效和安全要求、限值、測試方法和標籤)。該草案有60天的諮詢期。 到目前為止，尚無強制執行的提案日期。

On 02 March 2021, it was published in the Federal Gazette of Mexico the draft standard PROY-NOM-034-ENER/SE-2020, Energy efficiency and Safety requirements for Fans. Limits, test methods, and labeling. This draft establishes the minimum Energy Efficiency of ceiling fans, with or without lighting equipment and wall, pedestal, floor, and table fans, as well as the test methods, safety requirements, labeling and the procedure for conformity assessment.

This draft does not apply to:

• Fans operating with a voltage equal to or less than 12 V;
• Fans to be incorporated as part of an end product;
• Fans destinated for industrial use;
• Fans to be used as air extractors;
• Tower, ion or bladeless fans.

The draft is published for 60 days consultation period. So far there is no proposal date to be enforced.

 

Qatar 卡達

卡達經濟貿易部發布第1/2021號決議，批准QS 2663: 2020標準的更新版本。該標準涉及空調的能效標籤和最低能效要求。該決議於2021年2月22日在官方公報上公布之日生效。

The Qatari Ministry of Economy and Trade has issued Decision No. 1/2021 approving the updated version of standard QS 2663:2020 on Energy Labelling and Minimum Energy Performance Requirements for Air-Conditioners.

This standard specifies the energy labelling requirements and the Minimum Energy Performance Standard (MEPS) requirements for single-package (such as window type) split-system non-ducted air conditioners using air and water-cooled condensers, and heat pumps employing air-cooled condensers and ducted air-conditioners using air-to-air heat pumps for the residential, commercial and industrial sector, as applicable in accordance with Qatari standards.

This Decision entered into force on 22 February 2021, on the date of its publication in the Official Gazette.

 

Thailand 泰國

泰國工業部於2021年3月2日發布部級法規，要求使用壓縮空氣冷卻系統和交流電的冰箱/冰櫃必須符合泰國工業標準TIS 2186-2561 (2018)，其中規定了該產品的能效要求。 該標準將從2021年8月29日起強制實施。

This Ministerial Regulation was published by the Thai Ministry of Industry on 2 March 2021, under the authority of the Industrial Product Standards Act.

The Regulation requires that certain household refrigerators and refrigerator-freezers, such as refrigerators/freezers using compressed air cooling system and alternating current meet Thai Industrial Standard TIS 2186 – 2561 (2018) specifying the energy efficiency requirements of said products, and are approved in accordance with the Announcement No. 5711 of the Ministry of Industry dated 29 May 2020.

The standard will be of mandatory application with effect from 29 August 2021.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

India 印度

IS 1293 插頭與插座實施的工業資訊指南。

Guideline for Information to Industry regarding the implementation of IS 1293:

​• At present IS1293:2005 and IS1293:2019 both are equally acceptable but after the following date i.e. 23rd Oct 2021, only IS 1293:2019 will remain active.

​• Initially varieties of 2P, 16 A were not covered in either of the previous two versions of IS1293. But now, it has been included in IS1293:2019 through Amendment-1.

​• Varieties of 10 A/ 2P+E are not included in IS1293:2019 with Amendment-1.  However, these varieties like 10 A/2P+E along with non-rewireable plugs only of 10 A/ 2P will be added in new standard through Amendment-2 which is under discussion.

​•  DPIIT notified Plugs and Socket-outlets as per IS 1293 for mandatory certification by BIS. This Quality Control Order is in effect from 2020/12/01.

 

India 印度

第五波強制列管產品生效日延至2021年10月1日

Miety has issued a notification on the Extension of products covered under Phase V.

The date of coming into effect of this Order was 01st April 2021. And now it is hereby notified that the date of implementation of the Order stands extended to 01st October 2021.

 

Philippines 菲律賓

菲律賓工業貿易局的標準局 (DTI-BPS) 在21-05號通告中發布強制認證的最新產品列表。該通知函於2021年1月25日生效。

The Department of Trade and Industry’s Bureau of Philippine Standards (DTI-BPS) published an updated list of products under mandatory certification in Circular No. 21-05.

The DTI-BPS updated the list which is classified into 3 groups namely:

• Electrical and Electronic Products;
• Mechanical/Building and Construction Materials; and Chemical and Other Consumer Products and Systems.

The products covered include, inter alia, the following:

• electric grills
• electric fans
• electric ovens
• turbo broilers
• induction cookers
• washing machines
• spin extractors
• refrigerators
• air conditioners
• electric juicers
• electric food mixers
• electric food processors
• electric kettles
• electric pressure cookers
• electric multi-cookers
• television sets
• incandescent lamps
• self-ballasted LED lamps
• circuit breakers
• plugs
• snap switches
• ceramic tiles
• child restraint systems.

This Circular entered into force on 25 January 2021.

沙烏地阿拉伯標準局 (Saudi Standards, Metrology and Quality Organization, SASO) 預計自2021年7月1日起增加最新的IECEE認證之管控範圍。管控清單上的產品及相似敘述的產品皆需要申請取得SASO IECEE Recognition Certificate (簡稱SIRC證書)。

 

2021年7月1日起預計新增的產品:

• 電動泵 (僅適用於5hp以下)
• 家用電炸鍋
• 電子遊戲及配件
• 煮水壺
• 電纜
• 咖啡機

 

之前已經在管制清單裡的產品:

• 家用電動水泵
• 手機
• 手機電池
• 移動電源
• 筆記型電腦，平板電腦
• 智能手錶和智能錶帶
• 電視機和顯示器
• 僅用於手機的無線耳機或耳機
• 手機和筆記型電腦充電器 (有線、無線以及車用)
• 家用洗碗機
• 照明產品 (所有燈具以及控制裝置)
• 光伏產品 (光伏面板和電池、逆變器和充電調節器、直流電纜)

 

若之後SASO提供更多的詳細資訊，我們將及時通知您。

 

另外，我們再度提醒您，針對影音資訊類產品申請SIRC證書，自2021年7月1日起將只接受IEC 62368-1第三版CB證書與測試報告 (IECEE 62368-1: 2018 (SASO IECEE 62368-1: 2020)。

 

SIRC證書是基於CB證書與測試報告發證，德國萊因TÜV 大中華區可以提供多種標準的CB相關測試與發證服務。多年來我們已幫廣大的客戶取得SIRC證書，有任何關於SIRC證書的問題，歡迎致電聯繫我們!

 

 

資訊 / 電信 ITE / Telecom

Algeria 阿爾及利亞

阿爾及利亞公佈關於SRD等產品的新法規限值要求，另增加77GHz的頻段。

On 2020-01-20, the Algerian Republic published the JOURNAL OFFICIEL DE LA REPUBLIQUE ALGERIENNE N°05

The new list of Characteristics of short-range devices used in the establishment of private internal radio networks has been published.

The maximum allowed Output Power / maximum magnetic field level has been defined for several frequency bands from 9 kHz – 246 GHz considering different applications like inductive, RFID, medical, general ISM applications, and Radars.

Now the 77 GHz Band with a limitation of 1W maximum output power is possible.

 

Brazil 巴西

ANATEL於2020年1月5日發佈第77號法案。該法案批准電信設備的網路安全要求。該新法案將在發佈後180天生效。

ANATEL published on Jan 5th, 2020 the new Act 77. This act approves the Cyber Security Requirements for Telecommunications Equipment. This new Act will become in force after 180 days of its publication.

Here are some of the main points:

This act is applicable to all terminal devices with connection to internet and telecommunications network infrastructure equipment.

According to item 4.1, when requesting the approval of devices under the scope of this act, ANATEL will request a Declaration Letter from the applicant with the following content:

a)indicating that the product was developed in compliance with the principle of security by design

b)relating to which requirements of this document the equipment and its supplier meet at that moment; and

c)Recognizing that they are aware that cybersecurity requirements are subject to updates, including regulatory and administrative ones, in line with technological development, with the emergence of new threats or vulnerabilities.

According to item 4.2, when ANATEL implements the Market Surveillance program, they can assess whether the product and its supplier maintain compliance with the requirements of this Act.

Items 5 and 6 of Act 77, describes the specific requirements for Cyber Security, such as:

a)Software/Firmware update

b)Remote management

c)Installation and Operation

d)Access to the device configuration

e)Personal data.

 

Brazil 巴西

2021年1月20日，ANATEL宣佈5G NR技術評估相關測試的部分 – 截至2021年3月31日之前，仍可以接受國外測試報告。

On January 20, 2021, the Agência Nacional De Telecomunicações (ANATEL) in Brazil informed through an official letter that the deadline for providing complementary tests reports related to the evaluation of 5G NR technology has been extended (from January 31) to March 31, 2021.
There are currently two laboratories in Brazil that can test for 5G NR technology. However, manufacturers have the option to provide test reports issued by foreign test labs to support the homologation of their 5G NR devices before March 31, 2021.

Two more local laboratories are expected to be available by the end of March 2021. Then, after 31st March 2021, it is expected that local testing for 5G NR will be mandatory in Brazil.

 

Chile 智利

2020年12月21日智利SEC發佈法規N°33811，推出SEC 協議PE N°8/10:2020。PE N°8/10:2020主要是要用IEC 62368-1:2014 或者 IEC 62368-1:2018 替換IEC 60950-1。涉及的產品有電腦 (筆記型和桌上型電腦)，平板電腦和手機的外接電源供應器。

現有的協議PE N°8/08:2016 (手機充電器) 和PE N°8/9:2019 (筆記型和桌上型電腦外置電源供應器) 依然有效，推測會給1-2年的過渡期至PE N°8/10:2020。

SEC has issued the SEC Resolution N°33811 launching the new SEC Protocol PE N°8/10:2020 for external power supplies for computers (laptops and desktops), tablets, and mobile phones.

This SEC protocol replaces the use of IEC 60950-1 by IEC 62368-1:2014 or IEC 62368-1:2018.

According to SEC, the current SEC Protocols PE N°8/08:2016 (battery charger for mobile phones) and PE N°8/9:2019 (external power supplies for computers (Laptops and Desktops)) will be still valid after the new SEC Protocol PE N°8/10:2020 enters into force. It is estimated that there will be a grace period (maybe 1 or 2 years) until the manufacturers and importers change to the new SEC Protocol PE N°8/10:2020.

 

EAEU 歐亞經濟聯盟

根據俄羅斯聯邦經濟發展部的法令 (2020年7月31日第478號、2020年12月30日第877號、2020年11月18日第1856號)，俄羅斯境外的企業申請EAC CoC 或者 DoC 時，需提供全球位置編碼Global Location Number (GLN) 和/或 全球交易品項識別碼Global Trade Item Number (GTIN)。GLN號碼的強制日期如下:

EAC DoC: July 01, 2021

EAC CoC: August 01, 2021

GTIN編號雖然不強制，但是若出貨的標籤上或任何出口文件上有提到產品的GTIN編號，該編號應該要在申請DoC或CoC時就提供，讓發證單位或當地代理商在FGIS資料庫事先登記。

According to the Russian Federation Government Regulations (№478 dated July 31, 2020, №877 dated December 30, 2020, and №1856 dated November 18, 2020), when enterprises outside Russia apply for EAC CoC or DoC, the Global Location Number (GLN) and/or Global Trade Item Number (GTIN) must be provided. The mandatory dates for GLN numbers are as follows:

EAC DoC: July 01, 2021

EAC CoC: August 01, 2021

Although the GTIN number is not mandatory, if the GTIN number of the product is shown in the label or any cargo shipping documents, the number should be provided in advance when applying for DoC or CoC so that the Certification Body or local agent can register the number in FGIS database.
Some products, such as cameras, perfume, and toilet water, shoes, some types of clothing, etc., have special labeling requirements. For these products, GTIN numbers are also mandatory.

 

India 印度

2021年2月2日，印度電信部發布了關於濫用TEC簽發的“製造商證明”批准證書的通函。 TEC注意到，批准證書可能被誤用作“製造商證明”。

On 2 February 2021, the Indian Department of Telecommunications issued a Circular Regarding misuse of the Approval Certificate issued by TEC as “Proof of Manufacturer”.

It has come to the notice of TEC that the Approval Certificate may be misused as a “Proof of Manufacturer”.

In this regard, it is clarified that:

a) Approval Certificates issued by TEC are not proof of Manufacturing location/capabilities, ownership details, claim regarding local content of the product, etc., and are issued subject to Terms and Conditions mentioned overleaf in the Certificate.

b) In all future certificates, the type of Applicant (Trader/Manufacturer) shall also be mentioned to distinguish the trader from the manufacturer clearly.

The above annotation is applied to the existing valid and future Certificates to be issued.

However, if any such case is noticed/established regarding misuse of the Certificate, TEC reserves the right to cancel/suspend the Certificate.

 

Indonesia 印尼

SDPPI檔評估流程延長至2021年7月22日。SDPPI正式發佈了新公告 (KEPDIRJEN 11/2021) ，延長對HKT和Non-HKT產品的檔評估，並增加HKT和Non-HKT產品報告的認可實驗室。 TÜV萊因擁有相關HKT / Non-HKT產品的完整範圍。

Telecommunications ministry (SDPPI) has released an official announcement regarding the extension of the telecommunications equipment certification process through document evaluation.

Previously telecommunications ministry (SDPPI) regulated the document evaluation process in Kepdirjen 124/2020 which ended on January 23rd, 2021. In that regulation, the list of accredited labs for HKT products is 16 labs and for non-HKT products is 72 labs.

Based on that expired regulation, SDPPI decides to extend the document evaluation process for HKT and Non-HKT products. SDPPI has released the Kepdirjen 11/2021, in this new regulation, SDPPI sets 39 accredited labs for HKT products and 126 accredited labs for Non-HKT products.

Thus, the test report from the attached list of labs can be accepted by SDPPI to process certification. This regulation is valid for 6 months from the stipulation date.

 

Kuwait 科威特

2021年1月31日，科威特通信和資訊技術管理局 (CITRA) 發布指導文件，其中包括與連接到公共電信網絡的ICT設備相關的各種技術標準的列表。CITRA正在建立型式認證實驗室。完成後，將批准並發布新的型式認證流程。

On 31 January 2021, the Kuwait Communication and Information Technology Regulatory Authority (CITRA) issued this guidance document that includes a list of various technical standards related to ICT equipment connected to the public telecommunication network.

The Government of Kuwait has established a type approval process for all ICT equipment used within the country. The standards applied in Kuwait include standards that are also used for European ICT equipment and commonly applied across the GCC. Hence, the Current ETSI standards as used under the new RED type approval process in Europe are considered technical standards applied in Kuwait. CITRA is in the process of establishing a type approval lab. Once done, a new type of approval process will be approved and published.

Section 3.0 includes a list of safety requirements standards and they are divided into the following categories:

• Electrical
• RF and SAR
• Optical and Laser
• EMC

The annexes to this guidance document include the following standards:

• Annex 1: Mobile devices standards
• Annex 2: Mobile network radio base stations standards
• Annex 3: Standards for PMR
• Annex 4: Broadcast equipment standards
• Annex 5: License-exempt equipment standards
• Annex 6: Analogue telecommunications line equipment standards
• Annex 7: satellite communications equipment standards
• Annex 8: miscellaneous equipment standards

 

Malaysia 馬來西亞

2021年1月7日，MCMC / SIRIM宣佈對在3GPP Band 20 (800MHz) 運行的用戶設備 (UE) 進行認證。UE必須遵守標準ETSI EN 301 908-13 (通過提交測試報告來證明)。

On January 7, 2021, MCMC/SIRIM announced that User Equipment (UE) operating in the 3GPP Band 20 (800MHz) shall now be certified.

The UE must comply with the standard ETSI EN 301 908-13 (proven through submission of test report). All other scopes of products must comply with the related MCMC Technical Code (e.g. 2G, LTE, WiFi, etc.) as stated in the Certification Requirement document.

 

Malaysia 馬來西亞

2020年12月14日，馬來西亞通訊與多媒體委員會 (MCMC) 發佈了關於新產品等級分配的2020年1號文件，該文件取代了2019年1號文件。新產品等級分配涵蓋了從類別1到類別29的所有設備，產品範圍涵蓋從SRD、對講機到蜂窩移動接入設備。

Malaysia MCMC announced the latest Class Assignment No. 1 – 2020.

Class Assignment No.1 2019 will be canceled and replaced by Class Assignment No.1 – 2020.

The New Class Assignment is commencing on November 9th, 2020.

There are few minor changes in Class Assignments No. 1 – 2019 which will be replaced by Class Assignment No. 1 – 2020.

• Added new frequencies
• Removed usage of the frequencies
• Removed wireless access device schedule, and change the total schedule to twenty-nine schedule

 

Malaysia 馬來西亞

2021年1月14日，馬來西亞標準與工業研究院管理局 (SIRIM) 宣佈符合VoLTE功能的產品的要求。支持VoLTE的4G設備的所有新申請都需要顯示對此功能的符合性。SIRIM定義了兩個實施階段:

• 臨時批准 (目前適用): 從2020年11月6日到2021年6月29日
• 完全批准: 2021年6月30日之後

On January 14, 2021, the Standard and Industrial Research Institute Authority (SIRIM) of Malaysia announced the requirements for compliance of VoLTE capable products.

From now on all new applications for 4G devices that support VoLTE require showing compliance with this feature. To do this, SIRIM defined two implementation phases:

Interim Approval (current):

• From November 6, 2020, to June 29, 2021.
• The request for approval shall be submitted with a declaration of VoLTE support and that the function is enabled in the device.
• VoLTE test reports will also be accepted instead of a declaration after February 15, 2021.

Full Approval:

• After 30 June 2021.
• All new applications shall be submitted with a VoLTE test report (mandatory) and the VoLTE declaration is no longer accepted.
• The VoLTE test reports must be tested by a laboratory accredited under IR.92 or TS 34.229-1 or equivalent standards
• For applications submitted during the interim period above by declaration, they shall be updated by submitting the VoLTE test report by 30 June 2021 to continue CoC’s validity.

 

Moldova 摩爾多瓦

2021年2月22日以後，無線電設備不再允許在標籤上同時標示SM符合性標誌和CE標誌 (二者擇其一即可)。

According to the new regulation TR34/2019, which came into force in February 2021, the application of both CE and SM marks on the same product will not be permitted anymore.

TR34/2019 defines the following:

• Manufacturers are no longer permitted to affix the SM conformity mark and the CE marking to the same radio equipment.
• The affixing of the conformity mark is performed during the manufacturing process. Therefore, radio equipment manufacturers can decide to apply either the SM mark or the CE mark only on equipment produced after February 22, 2021.
• The products and stocks of products that were previously approved by the authority and manufactured and labeled prior to February 22, 2021, are not required to comply with this provision and shall be allowed to be placed on the market of the Republic of Moldova even if both conformity marks are placed on the same equipment.

The Certification authority in Moldova recommends that manufacturers who have not begun Type Approval applications or have only partially completed the application process, start to remove the SM mark if the radio equipment is already labelled with the CE mark.

 

South Korea 韓國

2021年2月8日，韓國無線電研究局 (RRA) 發布電磁相容性標準的修正案。 隨著結合了多媒體和通信功能的智慧設備的數量增加，此修訂對附件5中規定的電磁波抗擾度測試涵蓋的電子產品範圍進行了重新分類，以反映最近的技術趨勢。該通知將於2022年2月7日生效。

On 8 February 2021, the South Korean Radio Research Agency (RRA) issued an amendment to the Criteria for Electromagnetic Compatibility.

As the number of smart appliances combining multimedia and communication functions increases, this amendment reclassifies the range of electronic products covered by electromagnetic wave immunity tests prescribed in Annex 5 as follows to reflect the recent technological trends:

1: Devices without electrical control circuit

2: Equipment’s with an internal clock frequency of 15 MHz or less

3: Battery devices that are not included in the range of product 1

4: Products with internal clock frequency exceeding 15MHz and below 200MHz

5: Devices with internal clock frequency exceeding 200MHz.

The amendment also expands electromagnetic interference (EMI) measurement frequency bands from 30 MHz ~ 1 GHz to 30 MHz ~ 6 GHz and further expands electromagnetic radiation immunity (EMS) test frequency bands by newly establishing the testing frequencies for the product range 3 to 5.
The Notice will enter into force on 7 February 2022.

 

South Korea 韓國

2021年2月8日，韓國無線電研究局 (RRA) 發布電磁相容性 (EMC) 合格評定測試方法的修正案。 發布該修正案是為了更改某些KN測試方法，並引入了新的國家標準操作系統，這些方法在《 EMC國家標準符合性評估測試方法通告》的附件中。該通知將於2021年5月7日生效。

On 8 February 2021, the South Korean Radio Research Agency (RRA) issued an amendment to the Electromagnetic Compatibility (EMC) Test Methods for Conformity Assessment.

The amendment was issued to change certain KN test methods, which are in the annexes of the Notice on EMC Test Methods for Conformity Assessment to the National Standards (KS), with the introduction of the new national standard operating system.

Applicable devices and changed KS standards include:

• Immunity test for household electrical equipment: KS C 9814-2:2020
• Interference prevention test of household electrical equipment: KS C 9814-1:2020
• Common EMC test for radio equipment: KS X 3124:2020
• EMC test for specific low power wireless devices for wireless data communication systems: KS X 3126:2020
• EMC test for specific low power wireless devices: KS X 3125:2020
• Electromagnetic interference prevention test for multimedia equipment: KS C 9832:2019
• Electromagnetic wave immunity test for multimedia devices: KS C 9835:2019
• EMC test method for wireless devices for vehicle wireless devices and electrical and electronic components mounted on vehicles: KS C 9995:2021
• EMC test for automobiles and internal combustion engines, etc: KS C 9990:2017
• Interference prevention test for lighting equipment: KS C 9815:2019
• Immunity test for lighting equipment: KS C 9547:2020
• EMC test method for electric bicycles: KS C 9994:2021
• Immunity test for medical devices: KS C IEC 60601-1-2:201.

The amendment further changes test methods related to measuring instruments for electromagnetic interference and immunity, etc.

The Notice will enter into force on 7 May 2021.

 

South Korea 韓國

2021年2月1日，韓國技術與標準局 (KATS) 發布《電器和消費品安全控制法案》的修訂草案。 該草案將添加有關非面對面抽樣和工廠檢查標準的新附件30，以便在自然災害或大流行性疾病期間，對現場工廠檢查引入非面對面評估和KC安全認證審核方法。

On 1 February 2021, the South Korean Agency for Technology and Standards (KATS) issued a draft amendment to the Operation Bulletin of Electrical Appliances and Consumer Products Safety Control Act.

The draft would add a new Annex 30 on non-face-to-face sampling and factory inspection standards in order to introduce non-face-to-face evaluation and audit methods for KC safety certification, in cases when the on-site factory inspection is not possible due to natural disasters or pandemic disease.

Also, the draft would add notebook PCs to the list of products for which electronic-labelling can be made as per Article 59.

 

South Korea 韓國

2021年2月1日，韓國貿易，工業和能源部 (MOTIE) 發布《電器和消費品安全控制法實施規則》修正案草案，該草案將把音頻處理器和視頻處理器的安全管理級別從受安全保證的產品變為供應商的合格保證。有興趣的公司可在2021年3月15日之前線上提交評論。

On 1 February 2021, the South Korean Ministry of Trade, Industry, and Energy (MOTIE) issued a draft amendment to the Electrical Appliances and Consumer Products Safety Control Act Enforcement Rules to reduce the corporate burden by reviewing the level of risk for products subject to safety management.

The draft would changes the level of safety management for audio processors and video processors from products subject to safety assurance to the supplier’s assurance of conformity.

The draft further improves the model classification by EEE subject to safety control, by changing the location of items and deleting unnecessary model categories, in Annex 1.

Interested parties are required to submit their comments online before 15 March 2021.

 

Thailand 泰國

泰國工業部於2021年1月21日發布並立即實施關於音視頻，資訊和通信技術設備之安全要求的工業標準TIS 62368 (1)-2564，該標準基於IEC 62368-1發行。

This Announcement issued with immediate effect on 21 January 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 62368 (1) – 2564 on Audio/video, Information and Communication Technology Equipment – Part 1: Safety Requirements, in accordance with the Industrial Product Standards Act.

The Standard was issued based on IEC 62368-1 and provides for safety characteristics of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. The standard does not include requirements for performance or functional characteristics of the equipment.

It also classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards.

Lastly, the Standard consists of general provisions, principles of product safety standards, scope, reference documents, definitions, general requirements, injury caused by electricity, a fire caused by electricity, and injuries caused by hazardous substances, etc.

 

家用電器 Household Appliances

India 印度

印度發布《製冷設備(質量控制)令, 2020》。該命令將於2022年1月1日生效。

Ministry of Commerce and Industry published the official “Refrigeration Appliances (Quality Control) Order, 2020″ ”which will be forced into effect from 2022/01/01.

 

India 印度

印度發布《空調及其相關零件，封閉式壓縮機和溫度感應控制(質量控制)第二修正令, 2020》，實施日期由2020年6月1日延至2022年1月1日。

Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Second Amendment Order, 2020.

There have been some changes in the quality control order which postpone the implementation date from 2020/06/01 to 2022/01/01.

Temperature Sensing control devices, which were part of the initial regulation will stand omitted from the regulation when it is implemented after 2022/01/01.

 

Indonesia 印尼

適用於廚房電器和液體加熱器具的SNI更新法規

New regulation update No. 58 years 2020 regarding the SNI mandatory standards for Kitchen machines and Heating liquid appliances. This regulation is issued under the Ministry of Industry authorities and will be officially implemented from December 22nd, 2021.

Detail timeline regarding this regulation:

Regulation Issued: December 23rd, 2020

SNI mandatory applied: December 22nd, 2021 (Issued date + 12 months)

Grace period 2 years: December 22nd, 2022 (Applied date + 2 years)

The grace period for products that already exist without the SNI mark in the market is 2 (two) years after the issuance date of this regulation. It means, products that are already produced (without the SNI mark) still can be sold in the market until December 22nd, 2022.

The certification scheme for audio-video is type 5 (the factory needs to be audited and local testing is required). The products covered in the scope of this regulation are as follows with the detailed HS Code No.:

 

Panama 巴拿馬

2020年1月22日，巴拿馬貿易和工業部發布第04/2021號決議，修訂有關批准冰箱和冰櫃的能效和標籤要求的DGNTI-COPANIT 105：2017技術法規的第31/2018號決議。該決議於2021年1月22日生效。

On 22 January 2020 the Panamanian Ministry of Trade and Industry published Resolution No 04/2021 to amend Resolution No. 31/2018 on Approving Technical Regulation DGNTI-COPANIT 105:2017 on Energy Efficiency and Labelling Requirements of Refrigerators and Freezers.

This Resolution amends Point 2 (Scope) of Technical Regulation DGNTI-COPANIT 105:2017 in order to provide a precise indication of the appliances that are excluded from the scope of the requirements:

• vertical cooler with one or more doors of minimum capacity 25L
• horizontal coolers of minimum capacity 50L
• horizontal freezers (including medical) of minimum capacity 50L
• vertical freezers of minimum capacity 50L
• closed cabinets of minimum capacity 100L
• ice pack keepers of minimum capacity 100L
• cooling or freezing rooms
• coolers with drink dispensers
• doorless coolers
• combined/2in1 cooler/freezers
• remote refrigeration equipment, wine coolers, wine cellars, water coolers, water dispensers, and ice-making machines.

This Resolution entered into force on 22 January 2021.

 

South Korea 韓國

2021年1月12日，韓國貿易，工業和能源部 (MOTIE) 發布《電器和消費品安全控制法實施規則》的修訂草案，主要是將製冰機的安全控制級別從“需要安全保證的產品”更改為“需要供應商保證合格的產品”。

On 12 January 2021, the South Korean Ministry of Trade, Industry, and Energy (MOTIE) issued a draft amendment to the Electrical Appliances and Consumer Products Safety Control Act Enforcement Rules.

The draft was issued for a more rational operation of the household goods safety management system, primarily changing the safety control level of ice machines to “products subject to the supplier’s assurance of conformity” from “products subject to safety assurance”.

Interested parties may submit their comments via email to consumer1@korea.kr or online before 13 March 2021.

 

Thailand 泰國

2021年1月，泰國工業部發佈多個針對家用電器類產品的標準，產品涉及家用洗衣機、空調、加濕器、可攜式加熱工具和類似用途電器等，詳情及實施日期請聯繫我們諮詢。

In January of 2021, a series of standards were published by the Thai Ministry of Industry, covering Washing Machines, Air Conditioners, Humidifiers, portable heating tools, and similar appliances, etc. For details and implementation dates, please contact us.

 

燈具 / LED Luminaires / LED

Brazil 巴西

2021年2月11日，巴西INMETRO / CONMETRO發布第78/2021號法規，該法規標準批准了直管，圓形和緊湊型管狀螢光燈電子鎮流器的技術法規。該法規將於2021年3月1日生效。

On 11 February 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 78/2021 which approves the Technical Regulation for Electronic Ballasts for Straight, Circular, and Compact Tubular Fluorescent Lamps.

The Regulation applies to electronic ballasts powered by the alternating current for straight, circular, and compact tubular fluorescent lamps, marketed separately or as part of luminaires and marketed as part of a kit with compact tubular fluorescent lamps when there is the possibility of using the ballasts separately.

Suppliers of electronic ballasts shall comply with the provisions of this Regulation. Products manufactured, imported, distributed, and marketed in the national territory must be safe for the user and the environment.

Accordingly, Article 5 establishes that manufacturers and importers must ensure that the products placed on the market, free of charge or not, meet all the requirements of this Regulation. Also, the other participants in the production and supply chain must maintain the integrity of the product and its markings, thus preserving compliance with the requirements of this Regulation.

All products in scope must comply with Brazilian technical standards ABNT NBR 14417:2011 AC supplied electronic ballasts for tubular fluorescent lamps – General and safety requirements and ABNT NBR 14418:2011 AC supplied electronic ballasts for tubular fluorescent lamps – Performance requirements. The certification of the products by an accredited body by Inmetro may facilitate proof of compliance with the minimum safety requirements.

Furthermore, ballasts certified in line with the provisions of Article 7(1) cannot bear the Conformity Identification Seal provided for by Portaria No. 267/2009. However, products manufactured and imported prior to 6 July 2020, certified in accordance with Portaria No. 267/2009, maybe marketed bearing the Conformity Identification Seal until the end of the stock.

 

EAEU 歐亞經濟聯盟

2020年12月24日，俄羅斯聯邦政府發布第2255號決議，批准照明用交流電路中使用的照明設備和電燈的能效要求。 根據第31條，應通過授權實驗室的測試報告或通過製造商的聲明證明產品合格。 該決議於2021年1月1日生效，並將會在TR EAEU 048/2019 (能耗設備能效要求技術法規) 生效之日起24個月後失效。

On 24 December 2020, the Russian Federation Government issued Resolution No. 2255 to approve energy efficiency requirements for lighting devices and electric lamps used in AC circuits for lighting purposes.

The Resolution provides requirements on the energy efficiency of general lamps, and certain types of fluorescent lamps, incandescent lamps, LED lamps, and high-pressure lamps, as well as performance requirements for the said products.

According to Article 1, the requirements do not apply to:

• decorative and artistic lighting and architectural lighting
• illumination and illumination of advertising structures
• emergency and evacuation lighting
• special-purpose lighting and military equipment.

In accordance with Article 31, product conformity should be demonstrated by test reports from authorized laboratories or through a declaration by the manufacturer.

The Resolution entered into force on 1 January 2021 and ceases to be valid 24 months after the date of entry into force of TR EAEU 048/2019.

 

Egypt 埃及

埃及貿易和工業部宣佈，埃及標準ES 7823 / 2020 《燈具的能源效率要求》的過渡期已延長一年至2022年2月3日，或至該標準修訂，以先到者為準。 製造商和進口商可以繼續依照標準7823/2014燈具的能源效率要求。

The Egyptian Ministry for Trade and Industry has announced that the transitional period for Egyptian Standard ES 7823/2020 on Energy Efficiency Requirements for Lamps and Luminaries has been extended by one year until 3 February 2022, or until the Standard is amended, whichever comes first.

In the meantime, producers and importers can continue to follow the Egyptian Standard 7823/2014 Energy Efficiency Requirements for Electrical Lamps.

 

South Korea 韓國

2021年2月5日，韓國貿易，工業和能源部 (MOTIE) 發布《電器和消費品安全控制法實施細則》修正案草案。本草案考慮到將燈具的電源跟蹤系統添加到受安全控制的產品列表中。有興趣的公司可在2021年3月21日之前線上提交評論。

On 5 February 2021, the South Korean Ministry of Trade, Industry, and Energy (MOTIE) issued a draft amendment to the Electrical Appliances and Consumer Products Safety Control Act Enforcement Rules.

Considering that Electrical Supply Track Systems for Luminaires are added to the list of products subject to safety control, this draft adds the said products to the luminaire section of Annex 1 on the model classification of electrical appliances.

Interested parties may submit their comments online before 21 March 2021.

 

South Korea 韓國

2021年2月5日，韓國技術標準局 (KATS) 發布《電器和消費品安全控制法案》的修訂草案。 該草案將燈具的供電軌道系統添加到受安全保證的電器中。有興趣的公司可在2021年3月21日之前線上提交評論。

On 5 February 2021, the South Korean Agency for Technology and Standards (KATS) issued a draft amendment to the Operation Bulletin of Electrical Appliances and Consumer Products Safety Control Act

• As the Electrical Supply Track Systems for Luminaires are added to electrical appliances subject to safety assurance, the draft brings changes to the Annexes as follows:
• Adding the said products to the detailed items of lighting equipment subject to safety assurance in Annex 2 (supplements the existing list of chain lighting fixtures, rechargeable portable lights, floodlight luminaires, and halogen luminaires)
• Adding the model classification and its detailed criteria of the said products to Annex 10
• Adding a list of parts subject to safety control of the said products to Annex 20
• Adding safety standard KC 60570 for the products to Annex 25.

Interested parties may submit their comments via email to mgkim@kats.go.kr or phone (82-43-870-5443) before 21 March 2021.

 

Thailand 泰國

2021年1月，泰國工業部發布多個針對燈具類產品的標準，產品涉及雙線型LED燈，自整流LED燈，固定式通用燈具，可攜式通用燈具等，詳情及實施日期請聯繫我們諮詢。

In January of 2021, a series of standards were published by the Thai Ministry of Industry, covering double-capped LED lamps, Self-Ballasted LED-Lamps, Fixed General Purpose Luminaires, portable general purpose luminaires, etc. For details and implementation dates, please contact us.

 

光伏 / 太陽能組件 Photovoltaic / Solar Modules

India 印度

延展光伏變流器以自我宣告進入印度的期限。

MNRE again extended the self-certification for SPV inverters from 2020/12/31 to 2021/06/30 and SPV inverters can be imported based on valid IEC certificates.

詳情請參閱此

電池 Battery

South Korea韓國

對於【可充鈕扣型鋰電池】，如果是軟包的，於2021年1月中旬開始落入KC 62133-2管控範圍，需要申請KC安全證書。如果是金屬外殼的鈕扣電池，則不在KC管控範圍，還是可以使用IEC 62133-2：2017 CB去轉KC證書。

As shown below picture, regarding the form of coin type, if it is a soft type the same as below, it needs to be KC certified. However, if it is made of metal and has the same shape like a coin type, it is not subject to KC certification; it can be also proceeded with a CB certificate and test report like other projects.

 

Thailand 泰國

泰國工業部於2021年1月21日發布並立即實施關於電動道路車輛推進用二次電池 (鋰除外) 的性能標準TIS 61982-2563。

This Announcement published in the Gazette with immediate effect on 21 January 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 61982-2563 on Secondary Batteries (Except Lithium) for the Propulsion of Electric Road Vehicles – Performance and Endurance Tests, in accordance with the Industrial Product Standards Act.

The Standard is based on IEC 61982:2012 and is applicable to performance and endurance tests for secondary batteries used for vehicle propulsion applications. Its objective is to specify certain essential characteristics of cells, batteries, monoblocks, modules, and battery systems used for propulsion of electric road vehicles, including hybrid electric vehicles, together with the relevant test methods for their specification.

The tests may be used specifically to test batteries developed for use in vehicles such as passenger vehicles, motorcycles, commercial vehicles, etc. However, the Standard does not apply to battery systems for specialist vehicles such as public transport vehicles, refuse collection vehicles, or heavy-duty vehicles, where the battery is used in a similar way to the industrial vehicles.

The test procedures are defined as a function of the vehicle requirements of the performance. The standard is applicable to lead-acid batteries, Ni/Cd batteries, Ni/MH batteries, and sodium-based batteries used in electric road vehicles.

The Standard consists of scope, definitions, general test requirements, rated capacity, dynamic discharge performance test, dynamic endurance test, and performance testing for battery systems, etc.

 

能源效率要求 Energy Efficiency Requirements

EAEU 歐亞經濟聯盟

2021年1月29日，EEC理事會決定將EAEU TR 048/2019《能耗設備能效要求技術法規》 延遲到2022年9月1日實施。

On January 29, the EEC Council decided to postpone enactment of the Union’s Technical regulation “On requirements for energy efficiency of power-consuming devices “(EAEU TR 048/2019)” to September 1, 2022. This initiative was put forward by the Russian party.

The effective date was postponed to grant manufacturers extra time to ensure a smooth transition to the requirements of the unified technical regulation. Besides the decision appreciates the necessity for measures aimed at normalizing the business environment and restoring business activities in light of the gradual removal of restrictions associated with the spread of new coronavirus infection.

Furthermore, the same document has established a deferred standard for energy efficiency marking of vacuum cleaners as well as postponed the date of entry into force of decision adopted by the EEC Council establishing the forms of labels for various types of power-consuming devices and their drafting rules to March 1, 2022; individual requirements set out in Annexes Nos. 3, 5, 6, 9, 12, 13 and 14 to the technical regulation, for a year.​

 

Ukraine 烏克蘭

烏克蘭能源部通過第676號命令，批准室內加熱器的能源標籤要求。該命令將於2021年12月28日生效。

The Ukrainian Ministry of Energy adopted Order No. 676 approving the energy labelling requirements for local space heaters.

The Technical Regulations are modelled on the criteria contained in EU Regulation No. 1186/2015. This Order establishes the requirements for the energy labelling of local heaters with a nominal heat output ≤ of 50 kW.

This Order enters into force on 28 December 2021.

 

Ukraine 烏克蘭

2020年10月26日，烏克蘭能源部通過第683號命令，批准技術法規 (TR)，該法規確立了專業冷藏櫃的能源標籤要求。該命令將於2021年7月4日生效。

On 26 October 2020, the Ukrainian Ministry of Energy adopted Order No. 683 approving Technical Regulations (TR) establishing energy labelling requirements for professional refrigerated storage cabinets.

The Technical Regulations are modelled on Commission Delegated Regulation (EU) 2015/1094 of 5 May 2015 supplementing Directive 2010/30/EU with regard to the energy labelling of professional refrigerated storage cabinets.

They establish requirements for the labelling and the provision of supplementary product information of professional refrigerated storage cabinets. They shall apply to electric mains-operated professional refrigerated storage cabinets, including those sold for the refrigeration of foodstuffs and animal feed.

The Technical Regulations provide a six-month transitional period for the marketing of all non-compliant devices put into circulation before the entry into force of this Order.

This Order enters into force on 4 July 2021.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

China 中國

2021年2月9日，中國國家認證認可監督管理委員會 (CNCA) 發佈修訂相關標準時強制性產品認證自我宣告評估方法實施要求的公告。 使用CCC自我宣告評估方法的產品製造商應積極追蹤並收集有關標準的修訂版，在新版標準實施一年內完成新版標準自我宣告換版。在新版標準實施後，應依據新版標準實施評定。新版標準實施前已經出廠、投放市場且不再生產的產品，無需進行新版標準自我宣告換版。

On 9 February 2021, the Certification and Accreditation Administration of China (CNCA) published an announcement on implementation requirements of compulsory product certification self-declaration evaluation methods when relevant standards are revised.

The manufacturer of the product that applies the CCC self-declaration evaluation method should actively track and collect the revision of the relevant standards.

The manufacturers should implement self-declaration in the following way when the standard is revised:

• In the transition period, the evaluation shall be performed based on the old or new version of the standard voluntarily, while after the implementation of the new version of the standard, the evaluation shall be performed in accordance with the new version of the standard.
• For the products that have completed the self-declaration in accordance with the old version of the standard, the new version of the standard self-declaration change should be completed within one year. Products that have been shipped, put on the market, and are no longer produced before the implementation of the new version of the standard do not need to carry out the new version of the standard self-declaration.

 

沙烏地阿拉伯 Saudi Arabia

自2021年1月1日起，SASO 不再接受5年內能效報告。

SASO has stopped the flexibility which was given due to the COVID-19 pandemic to accept the EER test reports with 5 years validity.

In this regard, the test report shall not exceed the below validity:

RoHS / REACH

沙烏地阿拉伯 SAUDI ARABIA

SASO發佈RoHS技術法規草案。根據世界貿易組織的建議，擬正式發布的日期為2021年1月7日。但是該技術法規尚未在官方公報上發佈，日期僅是建議並且可能更改。

Recently SASO published the draft technical regulation for ROHS and as per World Trade Organization the proposed date to be officially published will be January 7th, 2021 which means that enforcement of the TR will be in July, 2021.

NOTE: As long as the Technical regulation does not published in official Gazette, those dates are only suggested and can be varied.

 

德國萊因TÜV認證 TÜV Rheinland Accreditation

德國萊茵TÜV香港分公司成為中國CCC認證的授權實驗室

TÜV Rheinland Hong Kong is now the authorized lab for China CCC testing.

Currently the test scope covers below products:

 

燈 具 / LED  Luminaires / LED

泰國 THAILAND

泰國工業部發布鎢絲白熾燈的強制性安規要求: TIS 4 Part 1-2558 (2015)。該標準自2021年1月10日起強制實施。

Ministerial Regulation, B.E. 2563, 2020 was published by the Thai Ministry of Industry on 14 July 2020, under the authority of the Industrial Product Standards Act, regarding Mandatory Safety Requirements for Tungsten Incandescent Lamps.

The Regulation requires that all tungsten incandescent lamps meet Thai Industrial Standard TIS 4 Part 1- 2558 (2015) specifying the safety specification of the said products, and approved in accordance with the Announcement No. 5507 of the Ministry of Industry dated 30 September 2019.

The standard will be of mandatory application with effect from 10 January 2021.

 

資訊 / 電信 ITE / Telecom

巴西 BRAZIL

ANATEL發佈第7280號法案，該法案批准更新電信產品參考清單，並將於2021年6月1日起生效。

ANATEL published new Act 7280. This act approves the updating of the Reference List of Products for Telecommunications and replaces the Act No. 2222, of April 20th, 2020. This new Act will become in force after 180 days of its publication (in force after June 1st, 2021).
Below are the main changes:

• All products that previously required renewal every 1 year, now the renewal will be every 2 years, such as ONTs, WWAN devices, Mobile phones, batteries and chargers for mobile phones, IP phones, and many others. There will be no more renewal every 1 year;
• ANATEL will require ISO Certificate (with sworn-in translation if in English) for all Certifications, except for those products whose Conformity Assessment Mode is “Conformity Declaration”;
• ANATEL will accept testing report done abroad for some type of devices, such as OLT, Data Network Equipment (Switch) installed in corporative/industrial environment, Digital Multiplex, and many others. The foreigner laboratory must be accredited by one ILAC member. For more details, look into the Act for products with the notes: “Note 1”, “Note 3”, “Note 7” or “Note 8”.
• Some type of products previously not required any renewal, now they will need renewal every 3 years, such as, OLT, Data Network Equipment (Switch) installed in corporative/ industrial environment, Multiplexer, Coaxial cables, some types of Optical cables, and many others.

由於新冠肺炎的影響，ANATEL將簡化的續簽流程延遲至2021 年6月30日。凡是在2020年3月6日至2021年6月30日之間到期的證書，只要設備未進行任何修改，並提供新的外部與內部照片，就可以免於進行更新測試。

COVID-19 ANATEL Streamlined renewal process postponed until June 30th, 2021 ANATEL published today the Official letter nº 646/2020 (see annex). Due to the remaining impact of COVID-19, ANATEL decided to extend the Streamlined renewal process defined in the Letters nº 134/20, 194/20 and 384/20 and now all

Certificates with expiration date between March 6th, 2020 and June 30th, 2021, are exempt of doing renewal testing and providing new external/internal photos as long as the device had not suffered any modification.

 

印度 INDIA

TEC將ILAC報告的接受日期延展到2021年6月30日，安規、EMC/EMI基本要求除外。

TEC – MTCTE ILAC report acceptance.

TEC has extended the acceptance of ILAC reports up to 30.06.2021 for Technical parameters and except Safety, EMC/ EMI essential requirements.

印度發佈低電壓開關設備和控制設備的《電器設備(質量控制) 令, 2020》，實施日期將於2021年11月11日生效。

Electrical Equipment (Quality Control) Order, 2020 Department of Heavy Industry released the official “Electrical Equipment (Quality Control) Order, 2020″ which is related to ” Low – Voltage switchgear and controlgear” products. The date of implment will be after 2021-11-11.

 

俄羅斯 RUSSIA

俄羅斯 – 無線通訊認證 – 將由新部門 (Ministry of Digital Development, Communications and Mass Media of the Russian Federation) 管理。

Russia – FAC hands over activities to the new Ministry in November 2020, Decree No 719 was published by the Russian government with the intention to enhance governance in the field of digital development, communications and mass communications. All the activities which were carried out by the Federal Agency of Communications (FAC) now lie within the responsibility of the Ministry of Digital Development, Communications and Mass Media of the Russian Federation.

According to the announcement, there will be a 6-month transition period and the ongoing projects in progress by FAC will be switched to this new Ministry.

 

新加坡 SINGAPORE

IMDA修訂蜂窩設備技術規範，發佈住宅網關的新安全要求。該法規將於2021年4月13日生效。

IMDA Revised Technical Specifications for Cellular Equipment On 12th October 2020, Infocomm Media Development Authority (IMDA) – released new security requirements for residential gateways.

The finalised Technical Specifications for Residential Gateways will come into effect in six months, on 13 April 2021. Home routers previously approved by IMDA can continue to be sold until 12 October 2021.

Revisions include:

• The inclusion of 5G bands: n77, n78 , n257 , n258 and n261
• New EMC Standards requirement CISPR35
• The addition of safety requirement EN 62368-1

ANNEX Key Cybersecurity Requirements by IMDA

• Randomised and unique login credentials for each RG device
• Minimum password strength
• Disabling of system services and interfaces that are assessed to be vulnerable
• Automatic download of firmware updates for security patches by default
• Access to RG’s management interface to be securely authenticated
• Data inputs to the RG device shall be validated to protect against remote hacking

 

韓國 SOUTH KOREA

RRA在2020年10月16日更新WiFi 6法規，更新訊息如下:

RRA update WiFi 6

RRA update WiFi 6 regulation on Oct 16, 2020. Below is update info.

 

斯里蘭卡 SRILANKA

斯里蘭卡的電信管理委員會(TRC)更新短程設備的頻譜分配

TRC (Telecommunicates Regulatory Commission) of Sri Lanka updated Spectrum Allocation for Short Range Devices.

The following technologies and Bands are added to the list:

1. Ultra Wide Band (UWB) 6000.0 – 8500.0 (6-8.5GHz)

2. Short Range Radar 24050.0 – 24250.0 (24.05-24.25GHz) .

3. RFID 865 – 868MHz

TRC will now extend the certificate validity from 1 year to 3 years for the above mentioned technologies and new allowed bands.

斯里蘭卡的電信管理委員會 (TRC)更新RTTE型式認證法規(涉及新的認證流程及豁免清單)

TRC (Telecommunicates Regulatory Commission) of Sri Lanka published a new type approval regulation “Radio and Telecommunications Terminal Equipment (RTTE ) Type Approval Rules, 2020″ which came into force on December 16th, 2020. With this new regulation the authority intends to define the process for Type Approval, ensure that RF equipment operates in accordance with the National Plan (NFAT), and without causing interference.

Among the new requirements,

• Two Type Approval processes have been introduced:
• Standard, applicable to products without prior type approval. At least 1 sample will be required to support the application.
• Simplified, for products with prior TRC type approval.
• Labelling Requirements will be mandatory for all equipment approved by TRC.
• 4-year validity period for all approval certificates.
• Equipment exempt from approval:
• Short range infrared remote control equipment including TV remote controls, garage door opener.
• RF Equipment embedded in Desktop Computers and Laptops that use short-range radio technologies such as WiFi and Bluetooth.
• Transmitters with output power below 50mW.
• RF Equipment installed in a vehicle as part of it such as car navigation units, remote car keys that use short range technologies such as WiFi and Bluetooth.

 

紐西蘭 NEW ZEALAND

紐西蘭政府於2020年11月6日發布 [短程設備通用用戶無線電許可證的新修正案]。

RSM Amendment to the General User Radio License for Short Range Devices

On November 6th, 2020, also the New Zealand government has published through its official newspaper (the New Zealand Gazette) a new amendment to the General User Radio License for Short Range Devices.

The major changes made to the previous version (2019) are:

1.A new provision to permit the use of the frequency range 0.1485 – 30 MHz for wireless power transfer systems and induction loop systems used for the detection of foreign objections.

2.New provision to permit the use of frequency range 1785 – 1805 MHz for wireless microphone, in-ear monitors, or wireless audio transmitters.

3.Change on 5150 – 5350 MHz to implement WRC-19 Resolution 229. This change permits wireless LAN outdoor use and a power level up to 0 dBW (30 dBm or 1 W).

4.New provision to permit the use of the frequency range 13.553 – 13.567 MHz for RFID transmitters.

 

沙烏地阿拉伯 SAUDI ARABIA

SASO計劃將SASO-IEC-60950-1和SASO-IEC-60065過渡 到SASO-IEC-62368-1。目前IEC 60950-1, IEC 60065, IEC

62368-1 都可接受，但自2021-07-01起只接受IEC 62368-1。

SASO has a plan of making a soft transition of SASO-IEC-60950-1 & SASO-IEC-60065 to SASO-IEC-62368-1. The SASO effective date of applying SASO-IEC-62368-1 will be on 2021-07-01 to be superseded and replaces SASO- IEC-60950-1 & SASO-IEC-60065.

SASO still applied IEC-60950-1 & IEC- 60065 as well as IEC- 62368-1 to get IECEE certification, but from 2021-07-01 the only standard will be accepted is IEC-62368-1: 2018.

 

阿拉伯聯合大公國 UNITED ARABE MIRATES

阿拉伯聯合大公國TRA發佈UWB和SRD產品的新法規。

The Telecommunications and Regulatory Authority TRA in United Arab Emirates have released a new version for Ultra Wide Band and Short Range Devices regulation. The TRA revised the regulation to current version 4.0. The regulation was released 21 December 2020 and is in force.

The document defines the requirements for compliance, that UWB and SRD products need to fulfill. Within the regulation release, it shows the allowed frequencies together with information about usage of product, transmission power, duty cycle, channel spacing and the standard reference.

 

越南 VIETNAM

越南MIC已正式發布國家技術法規和QCVN 54: 2020 / BTTTT、QCVN 74: 2020 / BTTTT、QCVN 112: 2020 / BTTTT。新的國家技術法規將於2021年7月1日生效。對於舊標準發行的證書，客戶必須在2021年7月1日之後重新測試並重新申請新標準下的型式認可證書。

Vietnam MIC has officially released National Technical Regulations and according Circulars for implementation of QCVN 54:2020/BTTTT, QCVN 74:2020/BTTTT, QCVN112:2020/BTTTT. The new National Technical Regulations shall enter in force from July 1, 2021.

For the certificates issued based on old standards, client have to re-test and re-apply for the type approval certificates under the new standards right after July 01, 2021.

QCVN 54:2020/BTTTT

• Will impact all the products which have Wi-Fi or Zigbee (Laptop, tablet, mobile phone, access point, Wi-Fi router, other devices having Wi-Fi connection, smarthome Zigbee products, etc.)
• All test reports according to the former version QCVN 54:2011/BTTTT or QCVN 74:2013/BTTTT shall not be accepted for type approval certification. Devices will need to re-test according to 2020 version.
• QCVN 54:2020/BTTTT will not only replace QCVN 54:2011/ BTTTT but also replaces QCVN 47:2015/BTTTT for WIFI products having Tx power over 100mW EIRP but equal or less than 200mW EIRP (such as Access Points)

QCVN 74:2020/BTTTT

• Will impact SRD operated in 1GHz – 40GHz bands like 2.4GHz RFID / SRD, 24 GHz radar (RFID, SRD radar detector)
• SRD for non-specific application using 5725 ~ 5850 MHz bands will fall within the scope of these regulations. Meanwhile 5725 ~ 5850 MHz Wi-Fi products shall still be under scope of the QCVN 65.

QCVN 122:2020/BTTTT

• Will impact LoRa / LPWAN products
• This regulation does not apply to LPWAN products using IMT licensed frequencies bands
• The frequency allowed is only 920-923 MHz

In summary, the important changes include:

• All test reports according to version QCVN 54:2011/BTTTT or QCVN 74:2013/BTTTT shall not be accepted for type approval certification. Customers need to re-test according to the 2020 version.
• All Type Approval certificates which list QCVN 54:2011/ BTTTT or QCVN 74:2013/BTTTT need to be renewed or add- in QCVN 54:2020/BTTTT / QCVN 74:2020/BTTTT to maintain validity for importation.

MRA labs need to apply for MIC MRA recognition according to the new standards in order to get test reports accepted by MIC Vietnam for the new standards.

 

能源效率要求 Energy Efficiency Requirements

中國 CHINA

2019年12月17日，中國國家標準化管理委員會 (SAC) 發布關於洗碗機能量和水消耗的最低允許值的GB 38383-2019標準。該標準適用於使用熱水和/或冷水的洗碗機並於2021年1月1日生效。

GB 38383-2019 Minimum Allowable Values of Energy, Water Consumption and Efficiency Grades for Dishwashers, 2019.

On 17 December 2019, China Standardization Administration (SAC) published GB 38383-2019 on the minimum allowable values of energy and water consumption for dishwashers.

The standard applies to dishwashers using hot and/or cold water. It specifies terminology and definitions, limits values of energy consumption and water consumption, energy efficiency grades, water efficiency grades, noise emissions levels and testing methods.

This Standard will enter into force on 1 January 2021.

2019年12月31日，中國國家市場監督管理總局 (SAMR) 批准關於LED平板燈具的能效和能效等級的最低允許值的標準GB 38450-2019。該標準於2021年1月1日生效。

GB 38450-2019 Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of LED Flat Panel Luminaires, 2019.

On 31 December 2019, the China State Administration for Market Regulation (SAMR) approved standard GB 38450-2019 on the minimum allowable values of energy efficiency and energy efficiency grades of led flat panel luminaires.

This standard specifies the energy efficiency grades, energy efficiency limit values, and test methods of LED flat lights for general lighting. This standard applies to LED flat lights for general lighting with LED as light source, rated voltage 220V, frequency 50Hz, and thickness not exceeding 85mm, including LED light source and its control device, the thickness of external control device is not calculated in the thickness Inside. This standard does not apply to LED flat lights with energy-consuming non-illumination additional functions, LED flat lights with dimming/color adjustment functions, or LED flat lights with colors, patterns, or decorative parts on the continuous light-emitting surface.

This standard enters into force on 1 January 2021.

 

台灣 TAIWAN

2019年3月21日，台灣經濟部發佈自鎮流LED燈的新最低能耗 性能標準和檢查方法，該通知於2021年1月1日生效。

Minimum Energy Performance Standard and Inspection for Self-Ballasted LED Lamps, Notice No. 10804601210, 2019. On 21 March 2019, Taiwan’s Ministry of Economic Affairs published a Notice issuing new minimum energy performance standards and inspection methods for self-ballasted LED lamps.

The minimum energy performance standard applies to self- ballasted LED lamps within the scope of national standard CNS 15630 and others designated by BSMI. It does not apply to LED lamp with both rated and actual tested Color Rendering Index (CRI) above 95.

Minimum energy performance standards are set out in Annex. All LED lamps should be tested according to standard CNS 15630.

The Notice will enter into force on 1 January 2021.

 

墨西哥 MEXICO

墨西哥發佈商用冰箱NOM草案: PROY-NOM-022-ENER / SE- 2020

Draft NOM for Commercial Refrigerators

On December 23rd, 2020, it was published for public consultation the draft of the Official Mexican Standard PROY-NOM-022-ENER/SE-2020 that establishes the limits of maximum consumption of electrical energy per liter of useful refrigerated volume and the test method to verify its compliance, the safety requirements for the user and the test methods to determine its compliance, as well as the labeling and marking requirements. It applies to the new, used, and rebuilt Class I self-contained commercial refrigeration appliances. The public consultation period is for 60 days.

2020年12月19日，墨西哥發布新的CONUEE目錄，該目錄將 在2021年2月15日左右實施。

On December 19, 2020 Mexico published on the Federal Gazette the new CONUEE Catalogue that will be enforced in 60 days (around February 15th 2021. The new Catalogue reduces the number of products from 44 to 40 and also set clearer criteria about the application for approvals. It is established that for all the approvals that were already issued (and the ones that are in process), there is no need to apply for them again and they are still valid.

 

沙烏地阿拉伯 SAUDI ARABIA

SASO已發布標準草案SASO 2663，其中介紹了空調的新要求-季節性能效比 (SEER)。

SASO has issued a draft standard SASO 2663 introducing the new requirements of Air Conditioners – Seasonable Energy Efficiency Ratio (SEER).

The last date to submit public feedback will be in February 9th , 2021, then the draft standard will be finalized and accordingly the enforcement date will be announced.

 

其他 / 多主題產品 Others / Products with Multiple Subjects

智利 CHILE

智利官方SEC於2020年9月30日發佈公告N°33286，因受新冠肺炎影響，將延長以下六類產品智利進口的強制實施日期。

Chile SEC six product category extension news:

*(注1) 此日期原只限定當地經銷商(市面上銷售的產品)，延期後除了當地銷售商，製造商、以及進口商也應在該日期執行時強制認證要求。

解讀舉例如下:

PE N° 8/9:2019: 桌上型電腦及筆記型電腦的電源，原強制實施日期分兩個階段執行如下：

2021年1月2日起， 製造商生產的產品和進口商進口智利的商品必須取得SEC認證。

2021年9月1日起， 在智利市場上銷售的商品如仍未取得SEC認證，則不允許再銷售。

延期後，既”智利當地經銷商（市面上銷售的產品）必須同製造商、進口商一樣”，皆須於2021年9月1日起強制實施。

 

澳洲 AUSTRALIA

新南威爾士州REAS條例更新，申報產品需列印授權號，故建議客戶在產品標籤上標示RCM標識以及授權號。TÜV萊因的授權號為: TUVxxxxxxEA

NSW has published a regulation require product (declared article) need to affix Authorized mark regardless RCM mark is affixed or not, in order to avoid troubles, please advise to provide a rating label affixed RCM mark together with Authorized mark.

 

泰國 THAILAND

由於新冠肺炎導致TISI審核員無法出國進行工廠檢查並影響TISI認證流程，因此TISI官員 (照明，電池，插頭，延長線組， 行動電源產品組) 在一定條件下接受指定檢查機構的工廠評估文件。

Due to Covid-19 pandemic which cause TISI auditor unable to travel oversea for factory inspection and impact on TISI certification process, TISI officer (lighting, battery, plug, extension cord set, power bank product group) accept factory document evaluation done by assigned Inspection Body with some conditions.

Validity of factory inspection report (document evaluation):

-The report can be used to obtain permanent TIS certificate.

-The report can be reused for new model application but the report will be invalid once TISI allows auditor to travel for factory inspection. After TISI can resume factory inspection, this report cannot be used for new application anymore.

If customer wants to make new application, they need to arrange factory inspection.

-The report cannot be used for TISI factory registration.

-Client will not get a copy of factory evaluation report as this is special report which will be kept by TISI officer.

Factory evaluation report will start only after sample test result is passed (to avoid if Covid-19 is over the factory evaluation report will be invalid).

除TIS標誌外, QR碼的強制標示要求已暫延生效日至2021年7月20日執行。

Follow up from previous TISI QR code implementation news that TISI will require to display QR code in addition to TIS mark, now TISI has proposed to government cabinet via ministry of industrial to extend effective date of TISI QR code implementation for another 180 days. Government cabinet has already made decision to formally approve this extension of effective date as follows:

Government cabinet decision date: January 5, 2021 Previous effective date: January 21, 2021

New effective date: 180 days from previous effective date (July 20, 2021)

Original government cabinet news: https://www.thaigov.go.th/news/contents/details/38087

This is officially confirmed that TISI QR code effective date is extended as new effective date of July 20, 2021.

 

德國萊因 TÜV 是國際最大的認證機構之一， 我們強大的全球服務網路為客戶提供一站式全球市場准入服務。 為了幫助您掌握第一手資訊 , 了解各國最新認證要求 , 德國萊因 TÜV 每月將發布一期《國際市場准入資訊更新》 。 該內容均為德國萊因 TÜV 國際認證專家整理，版權所有， 轉載請註明出處， 否則視為侵權。為您，我們專心、專業 ! TÜV Rheinland is one of the largest international certification bodies in the world. Our strong global service network provides our customers with one-stop-shop global market access. We are happy to announce our new “Market Access News Update,” which TÜV Rheinland will release every month. This update will allow our readers to gain awareness of and understand the latest certification requirements. TÜV Rheinland has specific rights reserved; any use of an article must be referenced back to the Source. Otherwise, this shall be regarded as copyright infringement.

2020年底，俄羅斯官方頒佈了幾項聯邦政府法令，比如2020年7月31日批准的第478號法令，針對DoC申請流程的變更；2020年11月18日第1856號法令，針對合規評定資料庫的要求更新。以及國家經濟發展部在2020年12月24日公佈的第704號法令，針對EAC申請者的要求更新等等。

鑒於此，我們也收到了到俄羅斯發證機構的正式通知，2021年CU EAC 驗證將有如下變更：

• 2021年1月1日起，EAC DoC只能由當地進口商進行註冊且要求進口商有官方認可的電子簽名 (electronic digital signature)。發證機構仍可提供DoC相關服務，比如檢查技術文件並出具合規報告 (compliance report)。但是最後的註冊部分，必須由進口商自行完成。
• 根據最新官方規定，EAC CoC申請的技術文件包括俄文使用說明，完整測試報告等需要掃描全部上傳到FGIS (Rossaccreditation system) 發證系統，此要求增加了發證機構的發證流程和工作量， 因此EAC CoC的發證時間將有所延長，請知悉。

 

【特別提醒】

2021年俄羅斯監管機構將繼續加強對發證機構的監管力度。在2020年，我們已經看到有180多家發證機構和實驗室因為各種違規而被暫停了資格，直接或間接導致國內與海外客戶的不便與損失。因此提醒大家慎重選擇發證機構，以免影響產品順利銷往EAEU各國。

關於能效部份的消息：

2020年11月17日發佈的EAEU第146號決定確立了實施EAEU TR 048/2019「關於能耗設備能效要求」的程序。這套法規尚未實施，但強制執行的日期預計落在相關能效標誌設計的決議出版後，不會早於 2021 年 9 月 1 日之前實施。

一旦TR EAEU 048/2019生效後，該技術法規將取代目前歐亞經濟聯盟會員國所採用的國家能源效率和能效標誌要求。過渡性條款允許產品在歐亞經濟聯盟會員國所核發的能效證書到期之前，TR EAEU 048/2019生效後的兩年內 (2023年9月1日)，才能根據「舊」能效證書銷售產品。

德國萊因TÜV與俄羅斯最大的發證單位合作進入第18年，多年來致力於幫客戶在歐亞經濟聯盟境內取得證書並解決問題，我們擁有最完整的經驗與最優質的服務。如有疑問，歡迎來電，我們的國際驗證專家將為您的產品提供最佳解決方案！

 

法規隨時會有變動，最新情況請洽德國萊因TÜV。 若希望進一步了解環球驗證法規與標準，或想針對產品測試進行諮詢，歡迎 >>點擊此處<< 與我們聯繫！

 

2020年12月20日剛過，您知道有哪些國家和地區在這個日期之後只接受IEC 62368-1 CB證書與測試報告轉證，以及分別接受哪個版本嗎? TÜV萊茵國際認證專家為您精心製作總表，讓您一眼即看出各地的安規報告要求。

 

國家地區	可否用IEC 62368-1 CB轉證?	可接受的IEC 62368-1版本	備註
歐洲
歐洲	是	二版，三版皆可	2020-12-20之後強制實施
烏克蘭	是	二版，三版皆可	2020-12-20之後需使用IEC 62368-1 CB轉證
塞爾維亞	是	二版，三版皆可	2020-12-20之後需使用IEC 62368-1 CB轉證
摩爾多瓦	是	二版，三版皆可	2020年12月起需使用IEC 62368-1 CB轉證
歐亞聯盟 EAEU	是	二版，三版皆可	2020-12-20之後需使用IEC 62368-1 CB轉證
亞洲
烏茲別克斯坦	是	二版，三版皆可	證書上仍然標示60950-1
阿塞拜疆	是	二版，三版皆可
中國	否	暫時尚未實施	GB “62368-1” (計劃號20140168-Q-339)，規劃依照IEC 62368-1: 2018 第三版進行修訂，具體實施日期未知
韓國	否	暫時尚未實施	KSC IEC 62368‐1:2018草案修訂工作尚未完成
馬來西亞	是	二版，三版皆可	證書標準依照CB
新加坡	是	二版，三版皆可	證書標準依照CB
菲律賓	否		§ 需送樣當地測試 § PNS IEC 62368-1:2017已公布，但暫無計劃納入強制範圍
泰國	否		§ TISI 需要送樣當地測試 § NBTC (無線/電信產品) 可以使用IEC 62368-1測試報告作為符合性依據
越南	否		ITE/AV類產品無強制性安規認證
印度尼西亞	否		需送樣當地測試
印度	否		需送樣當地測試
日本	是	二版	目前J62368-1沒有明確的強制實施日期
柬埔寨	是	二版，三版皆可	目前CS IEC 62368-1: 2014沒有明確的強制實施日期
中國臺灣	否	暫時尚未實施	CNS 15598-1 (2020) (依IEC 62368 1: 2018 第三版修訂) 已制定，但尚未公布實施日期
美洲
墨西哥	是	二版，三版皆可
巴西	是	二版	§ TÜV Brazil自願性S-mark § 證書標準依照CB
阿根廷	是	二版，三版皆可	§ TÜV Argentina S-mark § 證書標準依照CB
智利	否		只能送樣測試或基於MOU
哥倫比亞	否		TÜV 大中華區測試，TÜV哥倫比亞發證
中東
阿聯酋	是	二版，三版皆可	§ 2020-12-20起需使用IEC 62368-1 CB轉證 (二版或三版皆可) § 2021-12-20起只接受IEC 62368-1 第三版
沙特	是	二版，三版皆可	§ 目前IEC 60950-1, IEC 60065, IEC 62368-1 二版都可接受 § 2021-07-01起只接受IEC 62368-1第三版
科威特	是	二版，三版皆可
以色列	是	二版	2020-12-20之後只能用IEC 62368-1第二版轉證
敘利亞	參考備註	二版，三版皆可	2020-12-20之後需要型式認證的產品，Sy-TPRA會要求IEC 62368-1或EN 62368-1報告做為依據，不再接受IEC/EN 60950-1或IEC/EN 60065
非洲
埃及	是	二版，三版皆可
摩洛哥	是	二版，三版皆可	個別產品需用海關稅則碼另外查詢
南非	是	二版，三版皆可	§ 證書上仍然標示60950-1 § 需要CB核發單位另外出具declaration report
大洋洲
澳大利亞	是	二版	2022-02-15之後必須用IEC 62368-1轉證，之前已核發的AS/NZS 60950.1證書只可使用至2022-02-15

 

總的來說，2020年12月20日之後只有少數國家和地區持續接受IEC 60950-1 & IEC 60065 CB 證書與測試報告。 IEC 62368-1 第二版CB證書與測試報告的接受度最高，但個別國家和地區在2021年中與年尾時將開始只接受IEC 62368-1 第三版CB證書與測試報告。進入2021年，客戶可根據銷售需求規劃申請不同版本的CB 證書與測試報告。

TÜV萊茵在全球擁有強大的市場准入服務網路， 可以為您提供各國和地區的認證服務全球。 如有疑問，歡迎來電，我們的國際認證專家將為您的產品提供最佳解決方案！