2023年8月國際市場準入資訊更新
- Changed the IPv6 standard RFC 2460 to the new RFC 8200 for the Mobile Service (WWAN).
- Formalize that for products using WWAN modules already approved by ANATEL where the entire IPv6 protocol is implement in the WWAN module (not by the host), it is possible to carry out only the IPv6 protocol verification or testing only RFC 8200 would be enough to demonstrate the host meets ANATEL IPv6 requirements. Moreover, manufacturer will need to sign a declaration informing that the IPv6 protocol is fully integrated in the module.
- TV set-top boxes;
- Microcomputers;
- Portable computers;
- Display devices for use with computers;
- Printers connected to computers;
- Multi-purpose printers and copiers;
- Scanners;
- Servers;
- Fax machines;
- Mobile user terminals;
- Power supply;
- Power banks;
- Lithium-ion batteries and battery packs.
- 製造商/包裝商/進口商地址
- 通用名稱
- 尺寸和尺寸
- 其他相關資訊
- Address of Manufacturer / Packer / Importer: The name of the Manufacturer / Packer / Importer must be declared on the package itself. However, if the address or any other relevant information is not provided on the package, consumers will be directed to scan the QR code for obtaining such details.
- Generic Name: To retrieve the common/generic name of the commodity, Consumers will be directed to scan the QR code. Additionally, if the package contains more than one product, the QR code can be scanned to access the name, number, or quantity of each individual product, in case this information is not already mentioned on the package.
- Size and Dimension: If the size and dimension of the commodity are not specified on the package, consumers will be directed to scan the QR code to obtain this information.
- Other Relevant Information: The package should include the email address and telephone number of customer care. However, if any additional information is not mentioned on the package, consumers will be directed to scan the QR code for accessing the required details.
- from 718MHz – 748MHz and 773MHz – 803MHz
- to 715MHz – 748MHz and 770MHz – 803MHz.
- Radio Act Enforcement Regulations, Ordinance No. 14, 1950
- Article 51-2-2 on scope of designated radio equipment using specific frequencies.
- Radio Equipment Regulations, Ordinance No. 18, 1950
- Article 14 on tolerance of antenna power for radio stations relaying mobile radio communications.
- Article 24 on the limit that radio waves emitted to ensure that they do not interfere with the functions of other radio equipment.
- Article 49-6-9 on radio equipment for single carrier frequency division multiple access mobile radio communication.
- Frequency Allocation Tables, Plan, Notice No. 411, December 2020
- Appendix Table 10-2 on frequency table for cellular radio communications.
- the Radio Act Enforcement Regulations (Ordinance No. 14, 1950)
- Article 6: Conditions of radio stations that do not require a license.
- Article 6-2-4: Frequency range of radio equipment conforming to the technical standards.
- the Radio Equipment Regulations (Ordinance No. 18, 1950)
- Article 9-4: Frequency range for anti-interference functions that unlicensed radio stations shall have.
- Article 24 (24): Limitation of unintentionally emitted high frequency signals from DECT digital cordless telephone radio stations.
- Article 49-8-2-2: Conformity requirements for radio equipment of radio stations for DECT digital cordless telephones.
- Article 49-8-2-3: Conformity requirements for radio equipment of radio stations for sXGP digital cordless telephones.
- Appendix Table 2: Value of occupied frequency bandwidth allowed for emitted radio waves.
- Appendix Table 3: Unwanted Emission Intensity Limits for radio equipment of radio stations for sXGP digital cordless telephones.
- the Frequency Allocation Tables Plan (Notice No. 411, 2020)
- Appendix Table 8-6: radio station frequency table for digital cordless telephones.
- radio equipment and telecommunication terminal equipment,
- amateur radio equipment,
- aviation and air navigation equipment and spare parts,
- equipment that is incapable of generating or contributing to electromagnetic emissions which exceed a level allowing radio and telecommunication equipment and other equipment to operate as intended,
- equipment that will operate without unacceptable degradation in the presence of the electromagnetic disturbance normally consequent upon its intended use.
- Under the Telecommunications (Dealers) Regulations and IMDA’s Equipment Registration Framework, dealers/equipment suppliers of cellular mobile terminals are required to register such terminals with IMDA before they may be sold for use in Singapore.
- On 26 July 2023, IMDA together with Singtel Mobile Singapore Pte Ltd, StarHub Mobile Pte Ltd and M1 Limited (collectively the “MNOs”) announced the planned cessation of MNOs? 3G networks and the provision of 3G services, with effect from 31 July 2024.
- With the impending cessation of the 3G networks, IMDA will stop accepting new registrations and renewals of 3G-only mobile terminals and non-VoLTE capable mobile/smart phones with effect from 1 November 2023.
- With effect from 1 February 2024:
- Dealers/equipment suppliers are required to do the following with effect from 26 July 2023:
- The above measures will minimise the number of end users in Singapore who are still using 3G mobile terminals when 3G networks are gradually phased out with effect from 31 July 2024, and to avoid inconvenience to end users.
- For customers purchasing 4G or 5G mobile/smart phones, dealers/equipment suppliers are also advised to ensure that Voice over LTE (VoLTE) is enabled, or assist the customer to enable VoLTE on the new mobile/smart phones and encourage them to make a test call to ensure that voice calls can be made through VoLTE. With the cessation of 3G networks, voice call services such as those to emergency services can only be made via VoLTE. If queried on the need to enable VoLTE, dealers/equipment suppliers should explain that the VoLTE settings are needed to make/receive voice calls, given the cessation of 3G networks.
- No matter the Cert holder is the manufacturer or the local company, the Cert needs to list the full detail information of the manufacturer and the factory (OEM) information. If there are more than one factory, every factory should get their own type approval Certificate and the sample quantity should be prepared by the numbers of the factories.
- No matter the Cert holder is the manufacture or the local company, the Cert will show the country of original for the factories. Previously, it is not mandatory to list the country of original if the cert holder is the overseas manufacturer.
- Certification holder:
- For Oversea manufacture to hold the certification: It is only possible if the manufacturer has the representative office in Vietnam and the representative office should confirm the information of the factory ( OEM) .
- If a condition could not be satisfied, the certification holder could be the importer.
- The manufacture and the OEM/ODM do not belong to the same organization (providing the evidence) : Could get the type approval for 3 years still but we need to provide ISO9001 Cert of the factory and need to evaluation the production of OEM/ODM by video.
- The representative office could use the test report under the manufacturer’s name directly.
- For test reports issued from MRA lab, VNTA only accepts the reports issued according to QCVN standards instead of ETSI EN Standards. The MRA test lab needs to verify the test report and send the confirmation email as the evidence. The test report issued from non-MRA test lab is only accepted when the Ministry of Information and Communications announces they accept the test report result since there is no capability to test locally like 5G NR.
- When using the module report, the system applicant should get the authorization from the report holder.
- Report holder is the manufacturer: Should get the authorization from the representative office of the manufacture or be consular legalized.
- Report holder is the importer: The module test report must list the information on types, model number, manufacturer of the host device (the information of the listed host device must be the same with the information of the product applying for TA certification.)
- Drilling equipment;
- Fastening equipment;
- Grinding equipment;
- Cutting equipment;
- Polishing equipment and other tools.
資訊 / 電信 ITE / Telecom
Brazil 巴西
ANATEL最近發佈了新的7971法案，其中包括電信產品中IPv6協定合規性評估的技術要求。這項新法案將於2024年1月8日生效。主要變化涉及WWAN產品 – RFC 8200取代了RFC 2460標準。
ANATEL published recently the new Act 7971 with the technical requirements for IPv6 protocol compliance assessment in Telecommunication products. This new Act will come into force on January 8th, 2024.
This Act updated the requirements for IPv6 for products with WWAN, xPON, xDSL, and DOCSIS. Additionally, this standard has the following main changes:
However, for products that the IPv6 protocol is fully or partially implemented in the host’s software/firmware (E.g., implemented in Operational System), it is required to perform all the IPv6 tests again.
Regarding the tests, the major change in the new Act compared with the actual IPv6 requirement is the replacement of the RFC 2460 standard by the RFC 8200. The other testing requirements remained the same. Below is the table with the required IPv6 standards for each technology:
| TYPE OF PRODUCT | 3GPP TS 36.523-1 | ETSI TS 102 514 | RFC 8200
(NEW STANDARD) |
RFC 7084 |
| WWAN without 3G/4G (*) | NA | NA | NA | NA |
| WWAN with up to 3G, without 4G | NA | Applied | Applied | NA |
| WWAN with 3G/4G | Applied | Applied | Applied | NA |
| xPON, xDSL, or DOCSIS | NA | NA | NA | Applied |
Note (*): WWAN 2G and 5G NR does not need IPv6 testing.
For more details, you can find in this Official link.
Brazil 巴西
2023 年 7 月 13 日，巴西國家電信局 (ANATEL) 發佈了第 9281 號法案，批准智慧電視盒合格評定的適用技術要求。 該規範的目的是與國家電信局共同制定智慧電視盒設備合格評定的最低技術要求。
該規範於2023年7月13日生效，自2023年9月11日起強制實施。
On 13 July 2023 Brazil’s National Telecommunications Agency (ANATEL) published Act No. 9281 approving the applicable technical requirements for the conformity assessment of smart TV boxes.
The purpose of the law is to establish minimum technical requirements for conformity assessment, with the National Telecommunications Agency, for equipment classified as a smart TV box.
These requirements apply to smart TV boxes, characterised as terminal equipment intended for accessing audiovisual content over the Internet and viewing it on another device with a screen.
Personal computers, televisions, mobile phones, tablets, and pay-tv equipment are exempted.
The product must comply with the applicable standards listed in Article 2 and the relevant conformity assessment requirements, as well as other technical requirements specified by Anatel applicable to its interfaces or functionalities.
The Management responsible for the conformity assessment process, considering the evolution of the audiovisual content access and distribution processes, may publish, on the Anatel website, a list of other types of products that may or may not be classified as a smart tv box.
This Law enters intro force on 13 July 2023, with its application becoming mandatory from 11 September 2023.
China中國
2023年6月30日，國家認證認可監督管理委員會 (CNCA) 發佈了電子產品及安全配件強制性產品認證規則。 該規則適用於: 電視機上盒、微型電腦、可擕式電腦、與電腦一起使用的顯示裝置、連接到電腦的印表機、多功能印表機和影印機、掃描器、伺服器、傳真機、移動使用者終端、適配器、移動電源、鋰離子電池和電池組。
對於一類、二類設備，需要進行型式試驗和認證後監督。 獲證後監督包括跟蹤檢查、生產現場抽樣檢查和市場抽樣檢查。 認證機構應當在獲證產品的顯著位置加施認證標誌。 對於受尺寸限制的鋰離子電池，允許以適合電池外部尺寸的字體大小印刷“CCC”縮寫。
本規則所涵蓋的產品認證證書的有效期為5年。
該規則於 2023 年 8 月 1 日生效。
On 30 June 2023, the Certification and Accreditation Administration of China (CNCA) published rules for the compulsory product certification of electronic products and safety accessories.
The Rules apply to:
Applicable certification standards are listed in Article 2.
For type I and II equipment, type testing and post-certification supervision are required to be conducted. The post-certification supervision comprises follow-up inspections, sample inspections at the production site and inspections of market sampling.
The certification commissioner should attach the certification mark to the certified products in a conspicuous manner. For lithium-ion batteries constrained by size, it is permissible to print/mould the “CCC” abbreviation in a font size suitable for the external dimensions the batteries.
Product certification certificates covered by these rules are valid for a period of 5 years.
The rules enter into force on 1 August 2023.
China中國
中華人民共和國無線電頻率劃分規定
2023年5月23日工業和資訊化部令第62號公佈，自2023年7月1日起施行。
在本次《劃分規定》修訂中，工信部率先在全球將6425-7125MHz全部或部分頻段劃分用於IMT(國際移動通信，含5G/6G)系統。另本次修訂明確79-81GHz頻段無線電定位業務將優先用於汽車雷達等應用，為汽車智慧化技術應用和產業發展預留頻譜資源，支援汽車行業長遠發展。《超寬頻 (UWB) 設備無線電管理規定(徵求意見稿)》，將原先的6-9GHz工作頻段改為了7235-8750MHz，空出了6000-7235MHz的頻段。
The Ministry of Industry and Information Technology (MIIT) of China has issued a new version of the “Regulations on the Allocation of Radio Frequency of the People’s Republic of China” which came into effect on July 1, 2023. One of the main revisions includes the allocation of the 6425-7125 MHz frequency band for International Mobile Telecommunications (IMT), which includes 5G/6G.
China 中國
工業和資訊化部於2023年6月29日宣佈啟用新型進網許可標誌，其標誌規格樣式及申請流程請參考：2923560b3a0048209795bd737cf7fa03.pdf (miit.gov.cn)
The Ministry of Industry and information Technology (MIIT) of China announced on June 29, 2023, a revision to the Network Access License (NAL) mark to replace the original paper mark. Manufacturers can adopt methods such as electronic display, physical printing, label adhesion, or other circumstances depending on the product needs to add the new mark. As of July 1, 2023, the new NAL mark will be available and manufacturers may apply to use either the new mark or to use the original paper mark between July 1, 2023 and December 31, 2023. Beginning January 1, 2024, only the new NAL mark will be available for use. Previously issued paper markings will still be valid and may be used throughout the duration of their validity period.
Egypt 埃及
埃及國家電信管理局 (NTRA) 於2023年5月底在官網更新了認證模式及流程圖。NTRA的認證依據製造商來確定適用模式，針對品牌製造商所在下地區分別適用NTRA三種認證模式: Light, Tight及Intermediate Scheme。詳情見Type Approval Procedure – National Telecom Regulatory Authority (tra.gov.eg)
NTRA update – type approval procedures in their website on May, which is applicable to the product and the categories of countries indicated in the drawing defined as follows:
1) Category I countries: includes the European Union, the United Kingdom, Switzerland, Norway, Iceland, Australia, New Zealand, the United States of America, Canada, Russia, Japan, South Korea, Singapore and (Taiwan/People’s Republic of China).
2) Category II countries: includes China and India.
3) Third category countries: includes the rest of the other countries.
Details refer to Type Approval Procedure – National Telecom Regulatory Authority (tra.gov.eg)
El Salvador 薩爾瓦多
2023年7月9日，薩爾瓦多電力和電信總監管局 (SIGET) 發佈了第T-0408-2023號新決議，以批准免許可證使用Wi-Fi 6E。 新決議將5925-7125 MHz定義為非管制頻段，並僅允許應用於室內低功耗設備。
Superintendencia General de Electricidad y Telecomunicaciones (SIGET) in El Salvador published Resolución No. T-0408-2023 on July 9, 2023, updating the Cuadro Nacional de Atribución de Frecuencias (CNAF) to reléase the 6 GHz frequency band (5925-7125 MHz) for unlicensed use when it is used for Wi-Fi applications by low power devices indoors.
India印度
家用、商業和類似電器安全 (品質控制) 命令, 2023》草案於2023年7月初發佈，適用於額定電壓不超過 250V 單相交流電或 415V 三相交流電，且不屬於根據 BIS 法案發佈的任何其他品質控制命令範圍的所有家用、商業或類似用途的電器。
草稿命令中的商品或物品應符合相應的印度標準，並應根據 2018 年印度標準局 (合格評定) Scheme-1 of Schedule-II的規定，在印度標準局的許可下貼有標準標誌。
This draft Order –《Safety of Household, Commercial & Similar Electrical Appliances (Quality Control) Order, 2023》was recently published.
It shall apply to all electrical appliance intended for household, commercial or similar application with rated voltage not exceeding 250V single phase ac or 415V three phase ac and which do not fall under the scope of any other Quality Control Order issued under the BIS Act.
Goods or articles specified in the Order shall conform to the corresponding Indian Standard, and shall bear the Standard Mark under a license from the Bureau as per Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.
India印度
消費者事務、食品和公共分銷部下屬的消費者事務部發佈了電子預包裝產品的最新修正案。 該修正案修改了 2022 年 7 月 14 日發佈的先前通知的特定部分。根據 2023 年 6 月 23 日修訂的通知，現在允許實體通過二維碼提供以下未包含在產品包裝中的資訊。
Department of Consumer Affairs, under the Ministry of Consumer Affairs, Food and Public Distribution, has issued an updated amendment for the Electronic Pre-packaged Product. This amendment modifies specific sections of the previous notification released on July 14th, 2022. According to the revised notification dated 23rd June 2023, entities are now allowed to provide certain information via a QR Code, if it is not included in the product packaging.
Here are the details regarding the information that can be accessed by scanning the QR code:
Indonesia印尼
[法規草案] 2023 年 7 月 12 日，印尼郵政和技術總幹事提出了一項關於電信設備和/或短距離設備技術標準的法規草案。 該法規草案提議建立電信設備和/或短距離設備的技術標準。 該法規草案建議適用於電信設備和/或短距離設備。目前該草案正在搜集意見中。
On 12 July 2023, the Indonesian Director General of Post and Technology proposed a draft regulation on technical standards for telecommunications equipment and/or short range devices.
The draft regulation proposes to establish the technical standard for telecommunications equipment and/or short range devices.
The draft regulations proposes to apply to the following telecommunications equipment and/or short range devices:
– Bluetooth;
– Near field communication (NFC);
– Radio frequency identification;
– Low rate wireless personal area network (LR-WPAN) IEEE 802.15.4;
– Cordless Telephone;
– Wireless power transmission;
– Intelligent transport system;
– Ultra wide band (UWB);
– Devices with transmitting power below 10mW; and
– Other short range devices (SRD).
If approved, the draft regulation proposes to repeal the following regulations:
– Regulation No. 161/2019 concerning technical requirements for short range devices;
– Regulation No. 44/DIRJEN/2006 in relation to cordless telephone;
– Regulation No. 3/2020 concerning automotive short range radar system; and
– Regulation No. 4/2023 in relation to dedicated short range communication.
Indonesia印尼
印尼SDPPI於2023年7月12日發佈公告 – 關於SDPPI認證中的SAR要求。詳細強制時間請參考英文內容。
Indonesia SDPPI had issue an announcement On 12 July 2023. on mandating SAR Requirement for SDPPI certification.
This is conjunction with the previous announcement 001/DJSDPPI.5/SP.04.06/01/2023 and also Previous SRD standards.
Below are information combine with the online sharing section (on 26th July) and this announcement
– SDPPI will be apply the SAR Requirement by stages starting with Cellular Phone .
– below are the list of devices will be control and the effective date ( subject to changes by SDPPI)
Japan 日本
[法規草案] 2023年6月22日，日本總務省提出了對《無線電法實施條例》(1950年第14號條例)、《無線電設備條例》(1950年第18號條例) 和《頻率分配表計畫》 (2020年第411號公告) 的修正案。修正案旨在引入窄帶LTE-Advanced系統，以擴大行動電話的頻率。
頻率修改如下:
從 718MHz – 748MHz 和 773MHz – 803MHz
至 715MHz – 748MHz 和 770MHz – 803MHz。
On 22 June 2023, the Japanese Ministry of Internal Affairs and Communications proposed amendments to the Ordinance on Radio Act Enforcement Regulations (No. 14, 1950), Radio Equipment Regulations (No. 18, 1950), and the Frequency Allocation Tables Plan (No. 411, 2020), and others.
The amendments aim to introduce narrowband LTE-Advanced systems for expanding frequencies for mobile phones.
The frequencies are amended to expand as follows:
The amendment affects the following Articles:
Interested parties may submit their comments online.
Japan 日本
[法規草案] 2023年7月7日，日本總務省提出了對《無線電法實施條例》(1950年第14號條例)、《無線電設備條例》(1950年第18號條例) 和《頻率分配表計畫》 (2020年第411號公告) 的修正案。該修正案旨在擴大 DECT 和 TD-LTE 數位無繩電話的頻段。
上述條款中的1895.616MHz頻率改為1885.248MHz。
目前該草案正在搜集意見中。
On 7 July 2023, the Japanese Ministry of Internal Affairs and Communications proposed amendments to the Radio Act Enforcement Regulations (Ordinance No. 14, 1950), the Radio Equipment Regulations (Ordinance No. 18, 1950), and the Frequency Allocation Tables Plan (Notice No. 411, 2020).
The amendments aim to expand the frequency band of DECT and TD-LTE digital cordless telephones.
The Articles affected by changes are:
The frequency of 1895.616MHz in above Articles shall be replaced with 1885.248MHz.
Interested parties may submit their comments until 7 August 2023.
Saudi Arabia 沙烏地阿拉伯
[法規草案] 2023年7月4日，沙烏地阿拉伯標準、計量和品質組織 (SASO) 通報WTO電磁相容技術法規草案。該技術法規適用於電氣設備，包括固定設備和裝置。一旦獲得批准，將在官方公報上公佈。
On July 4, 2023, the Saudi Arabian Standards, Metrology and Quality Organization (SASO) notified WTO of the draft electromagnetic compatibility technical regulations. Once approved, it will be published in the Official Gazette.
This Technical Regulation applies to electrical equipment, including fixed equipment and installations. Included in the scope are the devices and equipment covered by the relevant standards that are listed in Annex 1. The following are exempt:
Once approved, this Technical Regulation will be published in the official gazette. The WTO Notification deadline is 2 September 2023.
Singapore新加坡
新加坡IMDA於2023年7月26日發佈公告，停止僅使用3G移動終端和非volte移動/智慧手機的設備註冊和銷售。
Singapore IMDA had send out announcement yesterday 26th July 2023 for CESSATION OF EQUIPMENT REGISTRATION AND SALES OF 3G-ONLY MOBILE TERMINALS AND NON-VoLTE CAPABLE MOBILE/SMART PHONES
Below are the details:
IMDA will de-register the approved registrations of 3G-only mobile terminals and non-VoLTE capable mobile/smart phones.
The sale of 3G-only mobile terminals and non-VoLTE capable mobile/smart phones for local use will accordingly no longer be allowed from 1 February 2024. Dealers/equipment suppliers who had previously registered such mobile terminals and mobile phones with IMDA shall stop all sale of such deregistered mobile terminals and mobile phones for local use by this date.
Only dealers/equipment suppliers who are granted Dealer (Individual) Licences by IMDA may import or offer for sale unregistered 3G-only mobile terminals and non-VoLTE capable mobile/smart phones for export purposes and/or use overseas only. In such cases, IMDA’s licence conditions in relation to the sale of non-registered telecommunication equipment will apply.
When selling 3G-only mobile terminals and non-VoLTE capable mobile/smart phones to customers, dealers/equipment suppliers are to advise customers that 3G services will cease with effect from 31 July 2024. This will help ensure that these customers are fully aware and that they make an informed choice when purchasing such terminals/mobile phones, especially if they intend to use such terminals/mobile phones in Singapore.
If customers wish to purchase unregistered 3G-only mobile terminals and non-VoLTE capable mobile/smart phones for overseas use after 1 February 2024, dealers/equipment suppliers (who have a Dealer’s Individual Licence) may sell the mobile terminals to them, but only on the understanding that the mobile terminals are strictly for export purposes and/or for overseas use only.
Taiwan 台灣
BSMI訂定「應施檢驗遙控無人機商品之相關檢驗規定」。表列商品自 113 年 7 月 1 日起實施輸入及國內產製商品檢驗，檢驗方式為型式認可逐批檢驗或驗證登錄雙軌並行。
詳細資訊可參考此連結。
Legal Inspection Requirements for Drones (less than 2 kilograms in weight).
Nowadays, drones are frequently used for multiple purposes, such as photography and light shows. In order to enhance consumer safety, Bureau of Standards, Metrology and Inspection (BSMI) will add drones (less than 2 kilograms in weight) into the scope of legal inspection. Two alternative conformity assessment procedures are made available for the choice of applicants, i.e. Registration of Product Certification (RPC) or Type-Approved Batch Inspection (TABI). For more details, please see refer to the link.
Vietnam越南
越南資訊和通信部對認證要求/計畫實施了一些關於證書，證書持有者，以及測試報告的重大變更，詳細內容請參閱英文版。
Vietnam Ministry of Information and Communications had implemented some major changes for the Certification Requirement/Scheme
The summary of the changes are as follows:
If the certification holder is the importer, there will be two conditions:
1: The manufacture and the OEM/ODM belongs to the same organization (providing the evidence) : Could get the type approval for 3 years.
The importer could use the test report under the manufacturer’s name only when they get the LoA from the representative office or the LoA which has been consular legalized.
RoHS/REACH
China中國
[法規草案] 2023年6月16日，中國工業和資訊化部發佈了電氣電子產品限用物質要求強制性標準制定項目。 該標準草案適用於在國內銷售的電器電子產品，包括《電器電子產品有害物質限制使用管理辦法》中規定的通信設備、廣播電視設備、家用電器電子設備等。標準草案提出分兩步進行RoHS實施:
第一步：所有電氣電子設備必須滿足SJ/T 11364標準的要求，但GB/T 26572標準的應用是自願的
第二步：列入管理目錄的產品必須符合SJ/T 11364和GB/T 26572標準的要求
本標準草案立項週期為22個月。
On 16 June 2023, the Chinese Ministry of Industry and Information Technology released a project for the formulation of a mandatory standard on the requirements for certain restricted substances in electrical and electronic products.
The draft standard applies to electrical and electronic products sold in the country, including communication equipment, radio and television equipment, household electrical and electronic equipment, etc., as defined in the Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products.
The draft standard proposes to regulate the maximum permissible content of hazardous substances in electrical and electronic equipment, along with labelling requirements.
The draft standard proposes to carry out RoHS implementation in two steps:
– The first step: it is mandatory for all electrical and electronic equipment to meet the requirements of the Standard SJ/T 11364, but application of Standard GB/T 26572 is voluntary;
– The second step: it is mandatory for products listed in the management catalogue to meet the requirements of the Standards SJ/T 11364 and GB/T 26572.
The proposal would integrate the above-mentioned standards and formulate them as a mandatory standard in order to accelerate the implementation of hazardous substance control in the green development of industries.
The development of an English language version in parallel is envisaged.
The project cycle of this draft standard is 22 months.
電池 Batteries
China中國
[法規草案] 2023年6月16日，中國工業和資訊化部發佈了電動工具用鋰離子電池及電池組安全技術規範強制性標準草案。 標準草案擬概述電動工具用鋰離子電池及電池組的安全核對總和試驗方法。 標準草案規定了電動工具用鋰離子電池及電池組的設計、生產和使用要求。
本標準草案的立項週期為24個月。
On 16 June 2023, the Chinese Ministry of Industry and Information Technology released a project for the formulation of a draft mandatory standard on the safety technical specification of lithium-ion cells and batteries used in electric tools.
The draft standard proposes to outline the safety inspection and test methods of lithium-ion batteries and battery packs for power tools. The draft standard specifies the requirements for the design, production and use of lithium-ion batteries and battery packs for electric tools.
The draft standard applies to the following electric tools:
The draft standard clarifies the different test methods for electrical safety tests, environmental safety tests, protection system tests, voltage tests and mechanical tests.
The project cycle of this draft standard is 24 months.
家用電器 House Appliances
Lebanon黎巴嫩
2023 年 5 月 26 日，黎巴嫩部長理事會發佈第 27 號決定，批准第 11505 號法令 – 批准供暖、通風和空調強制性標準。
– NL EN 12263:2020 製冷系統和熱泵 – 用於限制壓力的安全開關裝置 – 要求和測試
– NL EN 15218:2021 用於空間冷卻的帶有蒸發冷卻冷凝器和電動壓縮機的空調和液體冷卻機組 – 術語、定義、測試條件、測試方法和要求
– NL EN 15423:2021建築物送風系統的防火措施
– NL EN 12178：2021 製冷系統和熱泵 – 液位元指示裝置 – 要求、測試和標記。
這些標準自 2023 年 6 月 8 日起生效。
On 26 May 2023 the Lebanese Council of Ministers issued Decision No. 27 approving, among others, Decree No. 11505 – Approval of Mandatory Standards for Heating, Ventilation and Air Conditioning
Decree No. 11505 accords the status of legal obligation to the following national standards:
– NL EN 12263:2020 Refrigerating Systems and Heat Pumps – Safety Switching Devices for Limiting the Pressure – Requirements and Tests
– NL EN 15218:2021 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling – Terms, definitions, test conditions, test methods and requirements
– NL EN 15423:2021 Ventilation for buildings. Fire precaution for air distribution systems in buildings
– NL EN 12178: 2021 Refrigerating systems and heat pumps – Liquid level indicating devices – Requirements, testing and marking.
The above standards may be purchased from LIBNOR, the Lebanese Standards Institution.
These Standards are effective from 08 June 2023.
Saudi Arabia 沙烏地阿拉伯
SASO 已發佈《電氣和電子設備的待機、關閉模式電力消耗》技術法規，將被視為以下產品的附加要求。
實施日期為：2024年7月1日
製造商可以根據自我聲明來證明合規性。
| 範圍內的產品類別 | HS 編號 | 除外產品 |
| 乾衣機 | 8421 | – 電池供電的電器
– 通過變壓器連接至市電的電器 |
| 洗衣機 | 8422 | |
| 洗碗機 | 8450 | |
| 微波爐 | 8516 | 無 |
| 電烤箱 | 8516 | |
| 電視和顯示器 | 8528 | – 面積小於100平方釐米的螢幕
– 放映機 – 會議演示系統/顯示器 – 醫用監護儀 – 虛擬實境系統 – 控制台螢幕 |
SASO has issued the technical regulation of standby, off-mode Electric power Consumption of Electrical and Electronic Equipment to be considered as an additional requirement for below products:
Implementation date will be: July 1st 2024
Manufacturers can show compliance based on self-declaration.
| Products categories in scope | HS heading | Exemptions |
| Clothes Dryers | 8421 | – Battery operated appliances
– Appliances to be connected to mains supply through transformer |
| Clothes washing machines | 8422 | |
| Dishwashers | 8450 | |
| Microwaves | 8516 | No Exemptions |
| Electric Ovens | 8516 | |
| TVs & Monitors | 8528 | – Screen with Area less than 100 Sq.cm
– Projector – Conference presenting systems /monitors – Medical monitors – VR system – Control panels screens |
Taiwan 台灣
配合經濟部國際貿易局修訂中華民國輸出入貨品分類表, 應施檢驗「個人用之電保暖器具」等18項機電類商品貨品分類號列修正對照表。
詳細資訊可參考此連結。
In accordance with the revision of the Republic of China’s Import and Export Commodity Classification, as amended by the Bureau of Foreign Trade, Ministry of Economic Affairs, a revised reference table of product classification codes is provided for 18 electrical and mechanical products, including ‘personal electric heating devices,’ subject to inspection and testing.
For more details, please see refer to the link.
能源效率要求 Energy Efficiency Requirements
Egypt 埃及
埃及貿易和工業部頒佈了第 197 號決定，為生產商和進口商提供一年的過渡期，以遵守以下相關埃及標準：
ES 5454 建築五金機械操作鎖和鎖定板 – 要求和測試方法
ES 5806 家用和類似用途電器能源效率 測量和計算電熱水器能耗的方法
ES 8187 家用電器能效 即熱式電熱水器能效測量和計算方法
ES 4100 家用和類似用途電器能效 測量和計算洗衣機能耗的方法
ES 8057 家用電器能效 真空吸塵器能效測量和計算方法
ES 537 – 2 家用和類似用途電器的安全要求 – 第 2 部分：電風扇的要求
ES 904 家用和類似用途電器-安全-真空吸塵器和吸水式清潔器具的特殊要求
ES 6575 家用和類似用途電器 – 安全 – 洗碗機的特殊要求
該決定於 2023 年 7 月 6 日生效。
這些標準可從埃及標準與品質組織的官方網站購買。
The Egyptian Ministry for Trade and Industry has enacted Decision No. 197 providing producers and importers with a one-year transitional period to comply with the following relevant Egyptian standards:
– ES 5454 Building hardware mechanically operated locks and locking plates – requirements and test methods
– ES 5806 Energy efficiency of household and similar electrical appliances methods for measuring and calculation energy consumption or electric water heaters
– ES 8187 Energy efficiency of household electrical appliances methods for measuring and calculating energy efficiency of electric instantaneous water heater
– ES 4100 Energy efficiency of household and similar electrical appliances methods for measuring and calculation energy consumption of washing machines
– ES 8057 Energy efficiency of household electrical appliances methods for measuring and calculating energy efficiency of vacuum cleaners
– ES 537 – 2 Safety requirements for household and similar electrical appliances – Part : 2 Requirements for electric fans
– ES 904 Household and similar electrical appliances – safety – particular requirements for vacuum cleaners and water – suction cleaning appliances
– ES 6575 Household and similar electrical appliances – safety – particular requirements for dish washers
The Decision entered into force on 6 July 2023. These Standards are available for purchase from the Egyptian Organization for Standards and Quality’s official website.
Israel以色列
2023 年 6 月 25 日，以色列能源部發布了一項法規，廢除已下現行法規:
– 2011 年關於家用電器和辦公設備待機模式能效
– 2012 年有關室內燈泡能效
– 2011 年關於電視接收器最大電功率能效
– 2009 年有關熒光燈能效
– 2011 年有關變流器箱能效
此次廢除旨在放寬對以色列進口消費品的要求，通過允許快速通道方法為已滿足歐盟要求的節能設備簽發進口商符合性聲明。 該廢除將於 2023 年 7 月 25 日對受影響產品的進口商和製造商生效。 現有產品可在 2024 年 7 月 25 日之前繼續上市。
On 25 June 2023 the Israeli Ministry of Energy published a Regulations to repeal below existing regulations:
– Rugulation of 2011 on energy efficiency of household appliance and office equipment in standby mode
– Regulations of 2012 on energy efficiency of indoor light bulbs
– Regulations of 2011 on energy efficiency of maximum electric power for a TV receiver
– Regulations of 2009 on energy efficiency on fluorescent lamps
– Regulations of 2011 on energy efficiency of converter boxes
The repeal is part of a scheme being implemented to ease requirements on importing consumer goods into Israel, by allowing a fast-track method to issue an importer declaration of conformity for energy efficient equipment that has already met European Union requirements.
This repeal will take effect on 25 July 2023 for importers and manufacturers of affected products. Existing products may continue to be marketed no later than 25 July 2024.
Taiwan 台灣
2023年7月10日，台灣經濟部能源局發佈「具互連協定無風管空氣調節機節能標章能源效率基準與標示方法」的公告。本公告載列了無風管空氣調節機的適用範圍、能效測試方法、準則及標籤要求。本公告自2025年1月1日起施行。
On 10 July 2023, the Taiwan Bureau of Energy, Ministry of Economic Affairs published an Announcement on Energy Efficiency Criteria and Labelling Method for Energy Label Qualified for Non-ducted Air Conditioners with Interconnection Protocol.
This Announcement sets out the scope of application, energy efficiency test methods, criteria and labelling requirements for non-ducted air conditioners.
This Announcement enters into force on 1 January 2025.
Taiwan 台灣
2023年7月10日，台灣經濟部能源局發布「空氣清淨機節能標章能源效率基準與標示方法」修正案。該命令規定了適用範圍、能效測試方法、能效基準和標籤要求。
根據本命令，產品應符合CNS 16098家用和類似用途空氣清淨機－性能量測法規定之空氣清淨機，或以其他經相關主管機關所認可之空氣清淨機。該命令將於2025年7月17日生效。
On 10 July 2023 Taiwan’s Bureau of Energy, Ministry of Economic Affairs published an Order which amends existing Order No. 10004002220 on energy efficiency criteria and labelling methods for energy label qualification for air purifiers.
This Order sets out the scope of application, energy efficiency test methods, energy efficiency benchmarks and labelling requirements.
According to this Order, the product shall meet the definition of CNS 16098 regarding household and similar air cleaners/air purifiers, or otherwise be recognised by the relevant competent authority.
This Order will enter into force on 17 July 2025.
其他 / 多主題產品 Others / Products with Multiple Subjects
Chile智利
[法規草案] 智利電力和燃料監管局 (SEC) 在6月和7月期間發佈了多項SEC決議提案的公眾諮詢通知，針對以下多種產品計畫發佈新的執行協定或更新原執行協定。公眾諮詢自草案公佈起持續60天，機構或企業如有疑問可填寫相關表格諮詢SEC。 具體協議及實施標準如下:
The Chilean Superintendence of Electricity and Fuels (SEC) published some draft Resolutions/Protocol( New or updated) for many products in June & July, these drafts prepared by SEC is under public consultation period which lasts for 60 days after drafts released. If Institutions and enterprises have enquiries and comments about these drafts could write to SEC. Details info pls see below table:
|
產品 Products |
協議號
Protocol No.
|
標準
Standard |
| 空調Air Conditioner | PE N°1-26-2_2023
|
IEC 60335-1:2016 Ed.5.2;
IEC 60335-2-40:2018; IEC 60335-2-40:2022 |
| 空調Air Conditioner | PE N°1-26-2_2023
能源效率 |
ISO 5151:2017;
ISO 16358-1:2013; ISO 16358-2:2013; ISO 16358-3:2013 |
| · 冰箱、冰櫃、冷藏冷凍櫃Refrigerator, Freezer, Refrigerator Freezer
|
PE Nº1/17:2023 | IEC 60335-1:2016 Ed.5.2;
IEC 60335-2-24:2017 |
| 單相電熱泵產品 (製冷劑氣體直膨式、額定功率7kW及以下)
· Single-phase electric heat pump products with refrigerant gas direct expansion and rated power of 7kW or less.
|
PE Nº1/ xx:2023 * | IEC 60335-1:2016;
IEC 60335-2-40:2018; |
| 家用吸塵器
domestic vacuum cleaners |
PE Nº1/01/2:2023
能源效率 |
IEC TS 62885-1:2020RLV；
IEC 62885-2:2021
|
| · 衣服、毛巾、鞋子或手套的烘乾機
· Dryers for clothes, towels, footwear or gloves
|
PE Nº1/41:2023 |
IEC 60335-1:2016 Ed.5.2;
IEC 60335-2-43:2017 |
| 電視機 (尺寸至65英寸)
TV Set (size till 65”)
|
PE Nº 8-11_2023 | IEC 62368-1:2023 |
| 電視機上盒
· TV Set top box · |
PE Nº8/12:2023 | IEC 62368-1:2023 |
| 用於手動工具、草坪和花園機械設備的電池充電器Battery charger for hand tools, law and Garden machinery | PE Nº1/40:2023 | IEC 60335-1:2016 Ed.5.2;
IEC 60335-2-29：2019 Ed5.1 |
| 一般用途的固定燈具
Fixed fixtures for general use
|
PE Nº 5/xx:2023 * | IEC 60598-1:2020;
IEC 60598-2-1:2020; |
| 家用電子控制裝置Electronic control devices for domestic use (Domotics) | PE Nº 8/xx:2023 * | IEC 60669-2-1:2021 |
| 電纜
Electric cables RV-RVK |
PEN°2/15:2023 |
IEC 60502-1:2021 |
* 以上“xx” 代表該協議號未正式生成。
South Korea韓國
[法規草案] 2023年7月11日韓國RRA針對三項電磁兼容測試方法部份修訂草案。
修訂原因: 隨著電磁兼容領域國家標準（KS）的修訂，擬修訂以在電磁兼容測試方法中體現。
修訂內容:
1) KS C 9815:2020適用於照明設備的防干擾測試修訂為
KS C 9815:20203
2) KS C 9832:2019適用於多媒體設備的電磁干擾防護測試修訂為
KS C 9832:20203
3) KS C 9610-6-3:2017 適用於住宅、商業和輕工業環境中的干擾預防測試修訂為KS C 9610-6-3:2023
對上述修改有意見的機構、團體或個人，請於2023年7月31日之前向國家無線電研究機構(參考：無線電環境安全司) 提交書面意見。
On 11 July, 2023, The National Radio Research Agency (RRA) issued a notice no. 2023-56, the draft contents are as follows:
Reason for revision: With the revision of the national standard (KS) in the field of electromagnetic compatibility, it is proposed to be revised to reflect in the electromagnetic compatibility test method.
Revision contents:
1) KS C 9815:2020: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment revision to version KS C 9815:20203
2) KS C 9832:2019: Electromagnetic compatibility of multimedia equipment — Emission requirements revision to version KS C 9815:20203
3) KS C 9610-6-3:2017: Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and light-industrial environments revision to KS C 9610-6-3:2023
The deadline for comments is 31 July, 2023.
UAE 阿拉伯聯合大公國
UAE ECAS mark即將大改版!
根據阿拉伯聯合大公國工業和先進技術部 (MoIAT) 國家合格標誌及能效環境標籤改版目前仍在草案階段，具體實施日期尚未公佈，更多詳細資訊仍需待公佈，已知資訊如下:
供應商將有過渡期來添加或更新產品標籤。尚未製造或未印製國家合格標誌的新產品，正式決定公佈日起有6個月過渡期。 已上市帶有國家合格標誌的產品，正式決定公佈日起有一年過渡期。
改版標誌眾多，其中部分合格標誌如下所示:
UAE ECAS mark will be revised soon!
According to the Ministry of Industry and Advanced Technology (MoIAT) of the United Arab Emirates, the revision of the national conformity mark and energy efficiency environmental label is still in the draft stage, and the specific implementation date has not yet been announced. More detailed information still needs to be announced. The known information is as follows:
Suppliers will have a transition period to add or update product labels. For new products that have not yet been manufactured or printed with the national qualification mark, there is a 6-month transition period from the date of the official decision. For products with the national conformity mark already on the market, there is a one-year transition period from the date of the official decision announcement.
There are many revision marks, some of which are as follows:
| 國家合格標誌
National Conformity Marks |
新版
New |
舊版
Old |
| UAE Standards & Metrology |  |
 |
| ECAS mark |  |
 |
| EQM mark
維持不變 (EQM mark stays unchanged)
|
 |
|
追蹤我們
+886-2-2172-1001 (台灣)
+852 21921022 (香港)
+86 4008831300 (中國)
熱門分享
