2024年3月國際市場準入資訊更新
- CTF 3 test reports – Up to 30 June 2024 certification (including modifications to existing certificates and renewals) can be obtained using CTF3 test reports (subject to usual review for correctness, suitability, details as required etc) under the terms of: o The certificate applicant can show they received the test reports prior to, or within 2 months of, this v2.0 of this information bulletin being published; or
- CTF 4 test reports – no transition period is applied as there is no allowance for use CTF 4 test reports for certification.
- Protocol Test for any PON Interface (as per standards mentioned in ER): Exempted till 30 June 2024
- Automatic Laser Shut Down & Automatic Power Shut Down (as per IUT-T G.664.IEC 60825 Annex-A1): Self-declaration of Conformity by Applicant is acceptable.
- ECR (as per TEC 74046 Annex-R): Acceptable Test Reports are with ECR values calculated by OEM in-house lab or NABL.
- Interoperability test for GPON Int. (as per ITU-T G.984.x G.988 & BFF- TR 255 Annex-J5): Acceptable Test Reports should be of OEM in-house lab or NABL with sub-parameters.
- 型式核准應使用新的線上平臺TANZANITE PORTAL提交申請；
- 對於所有連接蜂窩網路的機上盒和終端電子通信設備，需要向TCRA 提交一台樣品進行測試或評估。其他設備僅根據要求才提交樣品；
- 關於模組認證，主機產品仍應獲得型式認證即便模組已有該認證。
- 新增TCRA標籤要求，內容和樣式如下圖。 其中XXXXXX/XXX/XXXX為證書編號，標籤應使用Arial字體 (字型大小最小為5)。允許使用電子標籤。
- 熱水器 (WH)
- 商用儲藏冰箱 (CSR)
- Water heaters (WHs)
- Commercial Storage Refrigerators (CSRs)
- a) Be registered;
- b) Meet MEPS, and
- c) Be labelled with an Energy Label
- labelling
- electrical safety
- temperature
- mechanical safety
- abnormal conditions
- malfunction
- end-of-life safety
- humidity prevention and dust prevention
- photobiological safety
- other technical requirements directly related to the protection of human health as well as the safety of life and property
- built-in controlgear for light sources
- independent controlgear for light sources
- intergral controlgear for light sources
- 在附件中增加鋰原電池的安全標準。標準包括適用範圍、安全要求、試驗方法、展示專案等。
- 增加紐扣式鋰原電池兒童防護包裝的測試方法和說明。
- Add safety standards for lithium primary batteries to the Annex. The standards include the scope of application, safety requirements, test methods, and display items.
- Add test methods and instructions for child protection packaging for button-type lithium primary batteries.
- a) A combination of the symbol for the type of electrochemical system and the symbol for the shape and dimensions
- b) Manufacturing date or week or recommended use expiration date
- c) Polarity
- d) Nominal voltage
- e) Manufacturer’s name
- f) Name of country of manufacture
- g) Name of importer (where applicable)
- h) Address and telephone number
- i) Precautions for use.
- Starting from 1 March 2024, the testing methods for conducting conformity assessment activities for the restricted use of hazardous substances will be implemented in accordance with the GB/T 39560 series of standards.
- Before 1 March 1 2024, if the conformity assessment is completed in accordance with GB/T 26125, the standard conversion will be completed through normal transition methods such as expiration of certificate renewal, product change, etc.
- Products that have been shipped or imported before 1 March 2024 do not need to undergo standard conversion.
資訊 / 電信 ITE / Telecom
澳洲 Australia
EESS更新過渡期實施指引：CTF 3 和 CTF 4測試報告不可用於 EESS 認證的 IECEE CB 測試報告
澳洲官方機構SCO發佈更新過渡期實施指引，對用於 EESS 認證的 IECEE CB 測試報告，CTF 3 和 CTF 4 不可接受。 過渡期如下：
對於那些正在使用 CTF3 測試報告進行認證的工作，
– CTF 3 測試報告-在 2024 年 6 月 30 日之前，可使用 CTF3 測試報告獲得認證。
– CTF 4 測試報告 – 不適用過渡期，因為不允許使用 CTF 4 測試報告進行認證。
注意：過渡期結束後，任何認證程序 (包括證書更新或修改) 都不接受 CTF 3 或 CTF 4 測試報告，即使最初的認證是使用 CTF 3 測試報告獲得的。
在本文件發佈之前頒發的所有現有認證 (使用 CTF 3 測試報告) 在其認證期限內仍然有效，除非因安全相關問題而提前取消 (使用這些證書的任何相關設備註冊在其註冊期限內有效，除非因安全相關問題而提前取消)。
本資訊公告適用於 EESS 的認證要求。
STANDING COMMITTEE OF OFFICIALS (SCO) published general guidance about IECEE CB test reports acceptance – customer testing facilities (CTF)
This general guidance document is to provide information on suitability of IECEE CB test reports, particularly when testing in customer testing facilities (CTF) is used by the CB Test laboratory. This guidance re-confirms suitable test reports for IECEE CB scheme within EESS.
As industry are affected by this clarification, a transition period for those who have work underway that may be using CTF3 test reports for certification is as follows:
o The certificate applicant can show they had engaged a test facility to conduct the tests prior to, or within 2 months of this v2.0 of this information bulletin being published; and
o the test reports are submitted with a certification application to a certifier before the transition period ends.
NOTE: after the transition period ends no test reports for CTF 3 or 4 will be accepted for any certification process (including renewal or modifications to certificates), even if original certification was obtained using a CTF 3 test report.
All existing certification (that used CTF 3 test reports) issued prior to this guidance document being issued remain valid for their period of certification unless otherwise cancelled sooner due to a safety related issue (and any related equipment registration using these certificates is valid for its period of registration unless otherwise cancelled sooner due to a safety related issue).
India印度
印度MTCTE 近期發佈針對「PON 系列寬頻設備」的某些 ER 參數的文件/豁免要求
繼2023年7月20日第5-5/2021-TC/TEC號信函之後，MTCTE下“PON系列寬頻設備”ER的豁免/測試報告/自我符合性接受情況如連結。
India issues Requirement of documents/exemption against certain parameters of ER of ‘PON Family of Broadband Equipment’ under MTCTE, in continuation to this office letter No. 5-5/2021-TC/TEC dated 20.07.2023, the status of acceptance of Exemption/ Test Reports /Self-Declaration of Conformity against the following parameters of ER of ‘PON Family of Broadband Equipment’ under MTCTE is as link:
India印度
印度TEC：混合機上盒將從MTCTE強制認證清單中移除
印度TEC已宣佈從MTCTE範圍內取消混合機上盒的通知。混合機上盒是MTCTE第五階段強制產品之一。請參考官方通知。
India TEC has announced the De-notification of Hybrid Set- Top Boxes from the MTCTE Scope. Hybrid Set Top Boxes were part of MTCTE Phase-V Notification. Please refer to the Link to official notification.
Indonesia印尼
印尼低功耗廣域網路非蜂窩電信設備技術標準，2024年第5號法令
2024年1月3日，印尼通訊與資訊科技部透過部長令頒佈了《低功率廣域網路非蜂窩電信設備技術標準》。 此技術標準旨在確保電信設備的連線性，並對在該國製造、組裝或進口和使用的低功率廣域網路（LPWAN）非蜂窩電信設備實施技術標準。其中一項重點是部長令第2條規定，LPWAN非蜂窩電信設備必須永久鎖定工廠，以便設備只能在規定的無線電頻段上運行。
該部長令自頒佈日，即2024年1月3日起生效。
On 3 January 2024 through Ministerial Decree, the Indonesian Ministry of Communications and Information Technology promulgated the Technical Standards for Low Power Wide Area Network Non-cellular Telecommunications Equipment.
The technical standards aim to ensure connectivity in telecommunications equipment and impose technical standards on low power wide area network (LPWAN) non-cellular telecommunications equipment manufactured, assembled or imported, and used in the country. The full content of the technical standards is set out in the Annex which is an integral part of this Ministerial Decree.
Among the key matters, Article 2 of the Ministerial Decree specifies that LPWAN non-cellular telecommunications equipment must be permanently factory-locked so that the equipment can only operate on the prescribed radio frequency bands.
Article 3 provides that compliance with the technical standards must be demonstrated by a certificate of telecommunications equipment and/or telecommunications devices in accordance with relevant laws and regulations. Article 6 clarifies that test reports for the LPWAN non-cellular telecommunications equipment generated before the effective date of the Ministerial Decree may still be submitted for the certification process of telecommunications equipment and/or telecommunication devices provided that they do not conflict with this Ministerial Decree.
The Ministerial Decree entered into force on the day of promulgation, namely 3 January 2024.
South Korea韓國
韓國正式發佈《無線電法》第 20067 號修正案，將自我符合性確認引入合格評定體系，並確立海外製造商指定國內代理商和報告不合格設備的要求
接續二國際市場準入資訊發布過的韓國《無線電法》法規草案，韓國科學、資訊技術和未來規劃部於2024年1月23日，正式發佈《無線電法》第 20067 號修正案。
該修正案旨在將自我符合性確認引入合格評定體系，並確立海外製造商指定國內代理商和報告不合格設備的要求，該修正案將於2024年7月24日生效。
This news is to follow TUV Rheinland Market Access monthly news of February, about the draft regulations on the Radio Act in South Korea.
On 23 January 2024, the Korean Ministry of Science, Information Technology and Future Planning issued an amendment to the Radio Act.
This amendment aims to introduce self-conformity confirmation into the conformity assessment system and establish requirements for overseas manufacturers to designate domestic agents and report non-conforming equipment.
Anyone who intends to manufacture, sell or import equipment that has a low risk of causing harm to the radio environment or broadcasting communication network shall undergo self-confirmation or a test by a designated testing agency to confirm and disclose that the equipment complies with the conformity assessment standards (Article 58-2).
Violations may result in administrative measures and fines.
For an overseas manufacturer to undergo conformity assessment, it is stipulated that a person with a domestic address or business office must be designated as an agent, and making a false designation may lead to the cancellation of the conformity assessment (Article 58-13).
The amendment shall enter into force on 24 July 2024.
South Korea韓國
韓國無線電研究所 (RRA) 發佈第2024-12號公告，修改多項電磁相容測試方法標準版本
2024年2月15日韓國無線電研究所(RRA)發布第2024-12號公告，根據《關於廣播通訊設備等合格評定的通知》第四條第三款的規定，修改多項電磁相容測試方法標準版本，其中包含如下:
1) KS C 9815:2020適用於照明設備的防干擾測試修訂為KS C 9815:2023
2) KS C 9832:2019適用於多媒體設備的電磁干擾防護測試修訂為KS C 9832:2023
3) KS C 9610-6-3:2017 適用於住宅、商業和輕工業環境中的干擾預防測試修訂為
KS C 9610-6-3:2023
本公告⾃2024年2月19日起施⾏。
On 15 February 2024, the National Radio Research Agency(RRA) issued announcement No. 2024-12.
According to the provisions of Article 4, Paragraph 3 of the “Notice on Conformity Assessment of Broadcasting and Communication Equipment, etc.”, several standard versions of electromagnetic compatibility test methods are modified, including the following:
1) KS C 9815:2020: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment revision to version KS C 9815:2023
2) KS C 9832:2019: Electromagnetic compatibility of multimedia equipment — Emission requirements revision to version KS C 9832:2023
3) KS C 9610-6-3:2017: Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and light-industrial environments revision to KS C 9610-6-3:2023
This announcement enters into force On 19 February 2024.
Tanzania坦尚尼亞
坦尚尼亞通信管理局發佈新版電子通信設備型式核准指南，通信設備製造商、進口商和銷售商確保其設備在進口到坦尚尼亞銷售或使用之前已通過TCRA的型式核准流程。
坦尚尼亞通信管理局TCRA於2023年11月發佈了新版電子通信設備型式核准指南，新指南自發佈之日起即時生效，涉及的要點如下：
The TRCA (Tanzania Communications Regulatory Authority) has published in November 2023 new guidelines on the Type Approval of Electronic Communications Equipment.
With the enforcement of the new guidelines, labelling has become mandatory.
家用電器 House Appliances
Chile智利
智利2024 年第 23152 號決議：使用可燃氣體的攜帶型和固定式戶外烹飪器具的安全測試和認證 – 修正案 (關於延長申請日期)
智利電力和燃料監管局於 2024 年 1 月 15 日發佈了第 23152 號決議。該決議修訂了 2022 年第 14337 號決議中公佈的關於使用可燃氣體的可擕式和固定式戶外烹飪器具的安全測試和認證的 PC 第 49/2 號議定書。
該修正案將議定書的適用日期從目前的 2024 年 2 月 1 日延長至 2024 年 5 月 2 日。在《議定書》生效後，決議中確定的產品的國家製造商、進口商和銷售商必須獲得相應的批准證書，然後才能將產品推向市場。
在 2025 年 2 月 2 日之前，2022 年 10 月 7 日的 49/2 號協定和 2007 年 8 月 1 日的舊 49/2 號協定將共存。在此之後，舊協議將從2025年起被新協議廢除。
該決議於2024年1月17日生效。
Resolution No. 23152 was issued by the Chilean Superintendence of Electricity and Fuels on 15 January 2024. The resolution amends Protocol PC No. 49/2 on Safety Testing and Certification of Portable and Stationary Outdoor Cooking Appliances Using Combustible Gases, published in Resolution No. 14337 in 2022.
The amendment extends the application date of the protocol from currently 01.02.2024 to 02.05.2024. After the Protocol becomes applicable, national manufacturers, importers and marketers of the products identified in the resolution must obtain the corresponding approval certificates before bringing the products onto the market.
Until 02.02.2025, the protocol 49/2 from 07.10.2022 and the old protocol 49/2 from 01.08.2007 will coexist. After this, the old protocol will be repealed by the new protocol from 2025.
The resolution entered into force on 17 January 2024.
Israel以色列
以色列修訂家用電器和類似設備安全的官方國家強制性標準：SI 900 第 2.5 部分 – 家用電器和類似設備的安全：洗碗機要求 (2024 年 2 月)
本通知於 2024 年 2 月 7 日在以色列公報上發佈並施行。舊的標準 SI 900 第 2.5 部分 – 家用電器和類似設備的安全：洗碗機要求 (2015 年 11 月) 將繼續適用六個月，與修訂後的標準一起，直到 2024 年 8 月 7 日。
Israel: Revision of Official National Mandatory Standard on Safety of Household Electrical Appliances and Similar Devices: Requirements for Dishwashers, Notice, February 2024
This Notice was published in the Israeli Gazette on 07 February 2024 and announces that instead of Standard SI 900 Part 2.5 – Safety of Household Electrical Appliances and Similar Devices: Requirements for Dishwashers, November 2015:
“Standard SI 900 Part 2.5 – Safety of Household Electrical Appliances and Similar Devices: Requirements for Dishwashers, January 2024,” will be official, excluding:
(1) Section 7 – Instructions and Marking, sub-sections 7.201 to 7.205;
(2) Section 10 – Current and Input Power, sub-sections 10.201 to 10.203;
(3) Section 204 – Energy Consumption, Water Consumption, Disposal Quality, and Drying Quality – in accordance with the manufacturer’s statement;
(4) Section 205 – Power Consumption in Standby Mode.
This Notice comes into effect on the day of publication.
Standard SI 900 Part 2.5 – Safety of Household Electrical Appliances and Similar Devices: Requirements for Dishwashers, November 2015, will continue to apply for a period of six months, alongside the revised standard, until 7 August 2024.
Colombia哥倫比亞
哥倫比亞2023年第 40772 號決議: 暫停開始實施空調設備、冰箱/冰櫃和大功率炊具的新能效值
2023 年 12 月 29 日，哥倫比亞礦業和能源部發佈了第 40772 號決議，延長了之前確定的空調設備能效新值的暫停生效時間，該值原定於 2024 年 1 月 1 日生效。在礦業和能源部確定新的生效日期之前，暫停仍然有效。
此外，該決議推遲了 2021 年第 40420 號決議第 2 條和第 3 條規定的商業用途大功率炊具、冰箱和/或冰櫃的能效值的制定。
該決議於2024年1月19日在哥倫比亞政府公報上公佈，自發佈之日起生效。
On 29 December 2023, the Colombian Ministry of Mines and Energy issued Resolution No. 40772 to extend the suspension of the commencement of the new values for the energy efficiency of air conditioning equipment, previously established as 1 January 2024, in accordance with Resolution No. 40247 of 2020 and Resolution 40420 of 2021. The suspension remains valid until the Ministry of Mines and Energy defines a new date of entry into force.
Additionally, this Resolution postpones the establishment of energy efficiency values fro high-power cookers, refrigerators and/or freezers for commercial use as set out in Articles 2 and 3 of Resolution 40420 of 2021.
This Resolution was published in Colombia’s Official Gazette on 19 January 2024, with application from the date of its issuance.
Philippines菲律賓
菲律賓 – 2024年3月25日推出PELP電風扇和洗衣機線上產品註冊平臺
菲律賓將推出用於電風扇 (EF) 和洗衣機 (CWM) 的PELP線上產品註冊平台。PELP產品註冊申請將於2024年3月25日開始接受。所有電風扇和洗衣機的進口商、製造商和分銷商均須透過PELP系統 (https://pelp.doe.gov.ph/) 註冊其各自的產品型號。
DOE will launch the PELP Online Product Registration Modules for Electric Fans (EF) and Clothes Washing Machines (CWM). PELP Product Registration applications will be accepted starting 25 March 2024. All Importers, Manufacturers and Distributors of Electric Fan and Clothes Washing Machines are enjoined to register their respective product models through the PELP System (https://pelp.doe.gov.ph/).
Singapore新加坡
[法規草案] 關於引入熱水器和商用冰箱最低能源性能標準 (MEPS) 和強制性能源標籤計畫 (MELS)
新加坡國家環境局 (NEA) 正在研擬有關引入最低能源績效標準 (MEPS) 和強制性能源標籤計畫 (MELS) ：
NEA計畫今年3月發佈正式公告，並於2025年4月1日執行。
The National Environment Agency (NEA) of Singapore is seeking feedback on the introduction of Minimum Energy Performance Standards (MEPS) and Mandatory Energy Labelling Scheme (MELS) for:
The consultation exercise will start on 12 January 2024 and end on 3 February 2024.
MELS and MEPS have been effective in improving the energy efficiency of appliances. The Government will progressively expand the MELS and MEPS to cover an increasing variety of appliances and is planning to implement MELS and MEPS to water heaters and commercial storage refrigerators starting from 1st April 2025.
When this proposal is adopted, applicable water heaters and commercial storage refrigerators will be regulated under the Energy Conservation (Regulated Goods and Registered Suppliers) Regulations (“EC(RG&RS)R”) and such goods will be required to:
Ukraine烏克蘭
烏克蘭2024年第991號命令：批准家用洗衣機和洗衣乾衣機能源標籤技術法規
烏克蘭第 991 號命令於 2024 年 1 月 25 日發佈，批准了技術法規，該法規規定了對電動家用洗衣機和電動家用洗衣乾衣機的標籤和補充產品資訊的要求，也包括電池供電和嵌入式的洗衣機和嵌入式洗幹一體機。
該技術法規以 2019 年 3 月 11 日的法規 (EU) 2019/2014 為藍本，補充了歐洲議會和理事會關於家用洗衣機和家用洗衣乾衣機能源標籤的法規 (EU) 2017/1369。
該法令將在2013年8月7日第702號決議“關於批准能源標籤技術法規”到期的同時生效，但不得早於其正式發佈之日起六個月。
Published on 25 January 2024, the Ukrainian Order No. 991 approves Technical Regulations which establish requirements for the labelling of, and the provision of supplementary product information on, electric mains-operated household washing machines and electric mains-operated household washer-dryers including those which can also be powered by batteries and including built-in household washing machines and built-in household washer-dryers.
The TR are modelled on Regulation (EU) 2019/2014 of 11.3.2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of household washing machines and household washer-dryers.
This Order enters into force at the same time as the Resolution of 7 August 2013 No. 702 “On the approval of technical regulations on energy labelling” expires, but not earlier than six months from the date of its official publication.
燈具 / LED Luminaiaries/LED
澳洲 Australia
SCO發佈三層絕緣線 (TIW) 的合規標準公告
近日澳洲官方機構SCO發佈公告界定三層絕緣線 (TIW) 的合規標準公告， 明確在評估與提供 SELV 輸出的燈具控制裝置相關的變壓器中使用的三層絕緣線 (TIW) 的合規標準。
此類變壓器應符合控制裝置標準中的要求，而不是音訊/視頻和資訊技術標準中的要求。燈具控制裝置標準(AS/NZS 61347.1)的附件 L 提到了 IEC 61558-1 要求此類繞組線需符合規定。
STANDING COMMITTEE OF OFFICIALS (SCO) published general guidance document to provide clarity on which standard should be applied when assessing compliance criteria for triple insulated wire (TIW) used in transformers associated with lamp controlgear providing SELV outputs. Such transformers should comply with the requirements referred to in the controlgear standard not the Audio/ Video and Information Technology standard. Annex L in the lamp controlgear standards (AS/NZS 61347.1) refers to clause 19.12 of IEC 61558-1. Clause 19.12.3 b) requires such winding wire to comply with Annex K.
China中國
中國光源安全要求標準GB 43471-2023
2023年12月28日，中國國家標準化管理委員會 (SAC) 批准了關於光源安全要求的強制性國家標準GB 43471-2023。本標準適用於光源產品，包括電光源、燈具、LED模組、OLED面板等類似產品。
該標準計畫於2026年1月1日生效。
On 28 December 2023, the Standardisation Administration of China (SAC) approved mandatory national standard GB 43471-2023 concerning the safety requirements for light sources. The electronic version of the full text was made available by the SAC in Announcement No. 21 dated 25 January 2024.
This standard applies to light source products including electric light sources, lights, LED modules, OLED panels and other similar products.
The standard differentiates light sources into 3 main categories: (i) light sources for general lighting purposes; (ii) light sources for special lighting purposes; and (iii) light sources for non-visual tasks, and further classifies light sources into levels 1-3. It stipulates the safety requirements for each category of light sources, outlining the general requirements and specific requirements as regards the following:
In addition, the standard sets out the applicable test methods, the test standards of which are prescribed in Appendix A.
The standard is scheduled to become effective on 1 January 2026.
China中國
中國電氣照明產品用控制裝置及其他輔助設備 安全要求，標準GB 43473-2023
2023年12月28日，中國國家標準化管理委員會 (SAC) 發佈了強制性國家標準GB 43472-2023，涉及電氣照明產品控制裝置及其他輔助設備的安全要求。
該標準適用於電光源的控制裝置及其零件，直流電低於 1000V，交流電低於 1000V，頻率為 50Hz 或 60Hz。
該標準計畫於2026年1月1日生效。
On 28 December 2023, the Standardisation Administration of China (SAC) published mandatory national standard GB 43472-2023 concerning the safety requirements for controlgear and other auxiliaries for electric lighting products.
The standard applies to controlgear and its components for electric light sources, with direct current below 1000V and alternating current below 1000V at 50Hz or 60Hz. The standard differentiates the controlgear into 3 main categories:
The standard is scheduled to become effective on 1 January 2026.
能源效率要求 Energy Efficiency Requirements
China中國
中國標準GB 43630-2023：塔式機架式伺服器能效和能效等級最低允許值
2023年12月28日，中國國家標準化管理委員會和國家市場監督管理總局發佈了強制性標準GB 43630-2023《塔式機架式伺服器能效最低允許值和能效等級》。
該標準規定了塔式和機架式伺服器的能效等級和能效限值，並進一步概述了適用的測試方法。
GB 43630-2023 將於 2025 年 1 月 1 日起施行。
On 28 December 2023, the Chinese Standardization Administration and the Chinese State Administration for Market Regulation published mandatory Standard GB 43630-2023 on Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Tower and Rack Servers.
The Standard specifies energy efficiency grades and energy efficiency limit values for tower and rack servers and further outlines the applicable test methods. The Standard applies to 1-channel and 2-channel tower and rack servers used for general purposes. The Standard does not however apply to servers equipped with auxiliary processing accelerators.
GB 43630-2023 will become effective on 1 January 2025.
Philippines菲律賓
菲律賓 – PELP照明產品、空調、製冷器具和電視機的執法活動將於2024年3月開始
隨著菲律賓能源標籤計畫 (PELP) 的實施，提醒所有利益相關者，照明產品、空調、製冷設備和電視機的執法活動將於2024年3月開始。根據《PELP實施指南》，將進行執法、監測和核查活動，例如現場檢查和標記市場樣本，以確保遵守PELP指南。所有PELP註冊公司 (照明產品、空調、製冷設備和電視機)、轉銷商和零售商 (線上和現場) 都被要求在開展這些活動時給予支持和充分合作。
In line with the implementation of Philippine Energy Labeling Program (PELP), all stakeholders are to be reminded that Enforcement activities for Lighting Products, Air Conditioners, Refrigerating Appliances and Television Sets Activity will start by March 2024. Under the PELP Implementing Guidelines, enforcement, monitoring and verification (EMV) activities, such as on-site inspections and tagging of market samples, will be conducted to ensure compliance to PELP Guidelines. All PELP Registered Companies (Lighting Products, Air Conditioners, Refrigerating Appliances and Television Sets), Dealers and Retailers (online and onsite) are enjoined to give their support and full cooperation in the conduct of these activities.
For guidelines on Enforcement Monitoring and Verification activities, please refer to this link: Implementing Guidelines for the Philippine Energy Labeling Program on Registration, Enforcement, Monitoring, Verification, and Compliance Mechanism.
電池 Batteries
South Korea韓國
[法規草案] 韓國2024年1月第2024-0005號通知草案：《須經安全確認的家居用品安全標準》，第2009-978號公告 – 關於附件5 鋰原電池和紐扣式鋰原電池的安全標準
2024年1月22日，韓國技術與標準局 (KATS) 提出了對《關於需要安全確認的家居用品安全標準的通知》的修正案。
該修正案旨在修訂關於電池安全標準的附件5。修訂的主要變化包括：
一般標籤應按照5.5.1進行。每個電池都必須通過在容易看到的表面上列印或貼上貼紙來用韓語標記。
目前該草案正在收集意見中，至2024年3月31日。
On 22 January 2024, the Korean Agency for Technology and Standards (KATS) proposed an amendment to the Notice on Safety Standards for Household Items Subject to Safety Confirmation.
This amendment aims to revise Annex 5 on safety standards for batteries.
The main changes in the amendments include:
General labelling should be conducted in accordance with 5.5.1. Each battery must be marked in Korean by printing or applying a sticker on a surface that is easily visible, with the following information:
Special labelling requirements would apply to swallowable batteries.
Opinions on this draft amendment may be submitted via email to kimdh4026@korea.kr until 31 March 2024.
RoHS/REACH
China中国
中國2024年第3號公告：調整電子電氣產品有害物質檢測方法
中國國家認證認可監督管理委員會 (CNCA) 宣佈，自2024年3月1日起，中國RoHS項下適用的合格評定體系測試方法將發生變化。《電氣電子產品有害物質限制使用合格評定制度》試驗方法標準，現為GB/T 26125，正在被修改為GB/T 39560系列物質測定標準。GB/T 39560系列對應IEC 62321系列標準。
根據中國RoHS標準，只有第一批合規管理目錄中所列的電氣和電子產品，以及2019年11月1日之後製造或進口的電氣和電子產品，才必須進行合格評定。這可以通過兩種方法完成，即自願認證或自我聲明，由製造商/供應商自行決定。在最近的公告之前，產品必須按照GB/T 26125進行測試。
China’s National Certification and Accreditation Administration (CNCA) has announced a change in the applicable conformity assessment system testing methods under China RoHS, effective from 1 March 2024.
In order to be consistent with international standards for testing methods of hazardous substances in electrical and electronic products, the testing method standard for the conformity assessment system for restricted use of hazardous substances in electrical and electronic products, currently GB/T 26125, is being modified to the GB/T 39560 series of standards for the determination of substances, specifically the following 8 standards:
GB/T 39560.1 Determination of certain substances in electrical and electronic products—Part 1:Introduction and overview
GB/T 39560.2 Determination of certain substances in electrical and electronic products—Part 2: Disassembly, disjointment and mechanical sample preparation
GB/T 39560.301 Determination of certain substances in electrical and electronic products—Part 3-1: Screening lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
GB/T 39560.4 Determination of certain substances in electrical and electronic products—Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
GB/T 39560.5 Determination of certain substances in electrical and electronic products—Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
GB/T 39560.6 Determination of certain substances in electrical and electronic products—Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
GB/T 39560.701 Determination of certain substances in electrical and electronic products—Part 7-1: Hexavalent chromium—Presence of hexavalent chromium [Cr(VI)] in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
GB/T 39560.702 Determination of certain substances in electrical and electronic products—Part 7-2: Hexavalent chromium—Determination of hexavalent chromium [Cr(Ⅵ)] in polymers and electronics by the colormetric method
The GB/T 39560 series corresponds to the IEC 62321 series of standards.
It will be recalled that under China RoHS conformity assessment is mandatory only for electrical and electronic products listed in the first batch of the Compliance Management Catalogue and manufactured or imported after 1 November 2019. This can be done through two approaches, either voluntary certification or self-declaration, at the discretion of manufacturers/suppliers. Until this recent announcement, products were required to be tested in accordance with GB/T 26125.
The transition is being implemented as follows:
Other planned revisions to China’s RoHS are in progress, including the addition of four phthalates (DEHP, BBP, DBP and DIBP) to the hazardous substance list of China RoHS and development of a mandatory standard for hazardous substances restriction and labelling, effectively combining existing Standards SJ/T 11364 and GB/T 26572.
其他 / 多主题产品 Others / Products with Multiple Subjects
China中國
[法規草案] 中國家用和類似用途電器衛生安全規範 (節能和環保)，標準草案GB XXXX-20XX
2024年2月12日，中國國家標準化管理委員會 (SAC) 和國家市場監督管理總局 (SMAR) 向世貿組織通報了擬議的強制性國家標準《家用和類似用途電器節能環保規範》。
該標準草案適用於家用和類似用途電器的節能和環保，涵蓋其生產、安裝、回收和再利用等不同階段。除其他外，“家用及類似用途電器”的定義是指非專業人士在家庭、公寓和類似處所(如商店、輕工等) 中使用的電器，單相交流供電電器的額定電壓不超過250 V，其他電器的額定電壓不超過480 V，其中可能包括直流供電或電池供電的電器。
目前該草案正在收集意見中。
On 12 February 2024, the Standardization Administration of China (SAC) and State Administration for Market Regulation (SMAR) notified the WTO regarding the proposed mandatory national standard entitled Household and Similar Electrical Appliances – Energy Saving and Environment Protection Specification.
The draft standard applies to the energy saving and environmental protection of household and similar electrical appliances, covering different stages including their production, installation, recycling and reuse. Among other things, “household and similar electrical appliances” are defined so as to refer to electrical appliances used by non-professionals in homes, apartments and similar premises (such as shops, light industry and etc.) with a rated voltage not exceeding 250 V for single-phase alternating-current-powered appliances, and 480 V for other appliances, which may include direct-current-powered or battery-operated appliances.
Any feedback and/or comments on the draft standard shall be submitted to the WTO before 12 April 2024. Upon approval, the standard is scheduled to enter into force after 36 months.
China中國
[法規草案] 中國家用和類似用途電器衛生安全規範 (一般原則)，標準草案GB XXXX-20XX
2024年2月12日，中國國家標準化管理委員會 (SAC) 和國家市場監督管理總局 (SMAR) 向WTO通報了擬議的強制性國家標準《家用和類似用途電器 – 健康安全規範》。
標準草案規定了家用和類似用途電器健康安全的一般原則、基本安全要求、健康保護功能、標籤要求、使用說明要求以及相應的試驗方法。該標準草案涵蓋了家用和類似用途電器的設計、生產、檢驗、使用、安裝、維護和維修。
除其他外，“家用及類似用途電器”的定義是指非專業人士在家庭、公寓和類似處所 (如商店、輕工等) 中使用的電器，單相交流供電電器的額定電壓不超過250 V，其他電器的額定電壓不超過480 V，其中可能包括直流供電或電池供電的電器。
目前該草案正在收集意見中。
On 12 February 2024, the Standardization Administration of China (SAC) and State Administration for Market Regulation (SMAR) notified the WTO regarding the proposed mandatory national standard entitled Household and Similar Electrical Appliances – Health Safety Specification.
The draft standard specifies the general principles, basic safety requirements, health protection functions, labelling requirements, instructions for use requirements, and corresponding test methods relating to the health safety of household and similar electrical appliances. The draft standard covers the design, production, inspection, use, installation, maintenance and repair of household and similar electrical appliances.
Among other things, “household and similar electrical appliances” are defined so as to refer to electrical appliances used by non-professionals in homes, apartments and similar premises (such as shops, light industry and etc.) with a rated voltage not exceeding 250 V for single-phase alternating-current-powered appliances, and 480 V for other appliances, which may include direct-current-powered or battery-operated appliances.
Under Article 5, basic safety concerns the requirements regarding ultraviolet (UVC) leakage, product noise emission, electromagnetic fields (EMF), ozone leakage, TVOC concentration, hygienic safety of food contact materials, and bacteriostatic ring.
Appendix A outlines the noise limit requirements for various types of electrical appliances. Appendix B describes the requirements on sterilisation function of the products.
Any feedback and/or comments on the draft standard shall be submitted to the WTO before 12 April 2024. The Upon approval, the standard is scheduled to enter into force after 36 months.
追蹤我們
+886-2-2172-1001 (台灣)
+852 21921022 (香港)
+86 4008831300 (中國)
熱門分享
