2022年12月国际市场准入资讯更新
- Waste batteries as covered under the Battery Waste Management Rules, 2022;
- Packaging plastics as covered under the Plastic Waste Management Rules, 2016;
- Micro enterprise as defined in the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006); and
- For the SABS ILAC EMC CoC Certification Process – the turnaround period or lead-time for this certification service will be ninety (90) days, to allow for adequate time to process applications from EMC testing Laboratories that have not been assessed by the SABS through the SABS A-Lab Program Scheme. Note that the SABS might also require samples to be provided as an additional requirement to aid the formulation of an outcome for non-A-Lab affiliates.
- For the SABS A-Lab EMC CoC Certification Process – the turnaround period or lead-time for this certification service will be thirty (30) days taking into account that the applications will be from EMC testing Laboratories that would have already been assessed by the SABS through the SABS A-Lab Program Scheme.
 |
 |
资讯 / 电信 ITE / Telecom
Brazil 巴西
2022 年 10 月 14 日，巴西国家电信局 (ANATEL) 公布了第13423号法规，旨在推迟原定于2022 年 10 月 26 日生效的第5159号法规。即在 2023 年 10 月 21 日之前，手机和车载充电器制造商能自由选择符合第 3481/2019 号法规 (旧) 或第 5159/2022 号法规 (新)。
Last April ANATEL released the Act 5159 with new Mobile Phone charger requirements and it will become in force as for October 26 2022. This act revokes the previous Act 3481, including some changes in the EMC testing for vehicle chargers, new mechanical testing for Wall Chargers’ Plugs and some others.
However recently, in October 14, 2022, the Agência Nacional de Telecomunicações (ANATEL) of Brazil published the extension validity of Act 3481 until October 21, 2023.
Therefore, from October 26, 2022 to October 21, 2023, manufacturers of mobile phones and vehicle chargers will be able to choose between the requirements approved by Act 3481/2019 (the previous law) or by Act 5159/2022 (the new Law).
Brazil 巴西
2022 年 10 月 10 日，巴西国家电信局 (ANATEL) 发布了第 14010 号法案，批准手机锂电池和充电器的安全标签。 该法案规定了用于手机锂电池和充电器的安全标签与 Anatel 标签的技术规范程序，以及标签供货商资格的必要要求。该法案废除了第 3482/2019 号法案，并将于 2022 年 12 月 9 日生效。
On 10 October 2022, the Brazil National Telecommunications Agency (ANATEL) published Act No. 14010 to approve the Security Label for Cell Phone Lithium Batteries and Chargers.
This Act established the procedure on the technical specifications for the security label in conjunction with Anatel label, to be used in lithium batteries and chargers used in mobile phones, and the necessary requirements for the qualification of suppliers of the label.
It applies in the commercialization of lithium batteries and chargers for mobile phones and to printing companies duly authorized to supply the security label in the exercise of their functions as agents of the process of conformity evaluation of products for telecommunications.
This Act repeals Act No. 3482/2019 and will enter into force on 09.12.2022.
Chile 智利
2022 年 9 月 30 日，智利电力和燃料监管局 (SEC) 发布了第 14224 号决议，批准了适用于家用和类似用途的外置式电池充电器的安全认证程序和协议PE Nº1/38:2022。相关产品需满足以下标准测试，本协议将于2024年3月31日起实施。
On 30 Sep 2022, the Chilean Superintendence of Electricity and Fuels (SEC) published Resolution No. 14224 to approve Protocol Nº1/38:2022 to establish the safety certification procedure for external battery chargers for household and similar purposes. Products in scope must be tested for compliance with below standard:
IEC 60335-2-29:2019-03 Ed. 5.1 Part 2-29 Particular requirements for battery chargers and IEC 60335-1:2016-05 Ed.5.2 (IEC 60335-1:2010+AMD1:2013+AMD2:2016) Household and similar electrical appliances – Safety – Part 1: General requirements.
The Protocol Nº1/38:2022 will be implemented from March 31st 2024.
China 中国
[法规草案] 公开征求 – 无线电发射设备型号核准代码编码规则。
公开征求《无线电发射设备型号核准代码编码规则（征求意见稿）》的意见 | 中国无线电管理 (srrc.org.cn)
The Chinese Ministry of Industry and Information Technology released a draft regulation regarding the CMIIT ID that is issued for approved Radio equipment. This ID is planned to have 12 digits that will contain the following five information: Year code, equipment category, territory code, manufacturer code and autonomous code for the equipment.
India 印度
由于测试基础设施不可用，TEC 决定将适用于多种产品的某些参数的测试豁免延长至 2023 年 6 月 30 日。
Considering the non-availability of test labs, TEC has decided to extend the testing exemption for certain parameters applicable on multiple products till June 30th, 2023.
|
Product Category |
Parameter |
|
All products (wherever applicable) |
· ECR |
|
LAN Switch |
· MPLS TP Requirement |
|
PABX |
· DTMF Parameter Set-C |
|
PTP PMP Microwave Fixed Radio System |
· Frequency for PMP Radio Interface |
|
Mobile Radio Trunking System |
· Conformance to Standards for MRTS |
India 印度
BIS 公布IS 16333 (Part 3) India Language support由2022年版取代2017年版, 原实施日2022年12月17日延至2023年6月17日。
BIS released a notification to extend the Implementation of revised IS 16333 (Part 3):2022 from 17th December, 2022 to 17th June, 2023.
China Taiwan 中国台湾
2022 年 11 月 1 日，BSMI和经济部发布了针对 18 种音像产品的修订法定检验要求。 自发布之日起，CNS 15598-1:2020 Audio/video, information and communication technology equipment – Part 1: Safety requirements 以及 CNS 15936:2016 Electromagnetic compatibility of multimedia equipment – Emission requirements are adopeded作为音视频设备的检验标准以确保消费者的安全，先前适用的标准自 2025 年 1 月 1 日起不再适用。 列名商品检验方式、合格评定方式注册、认证期限、检验期限等规定不变。根据修订后的检验标准，必须在 2024 年 12 月 31 日之前重新签署符合性声明。否则，如果未在截止日期前完成，则符合性声明自 2025 年 1 月 1 日起无效。
该修订版于发布之日 2022 年 11 月 1 日生效。详情请参考此连结:
https://www.bsmi.gov.tw/wSite/public/Data/f1667527135492.pdf
On 1 November 2022, Taiwan’s Bureau of Metrology and Inspection (BSMI) and Ministry of Economic Affairs published revised legal inspection requirements for 18 audiovisual products.
From the publication date, CNS 15598-1:2020 Audio/video, information and communication technology equipment − Part 1: Safety requirements and CNS 15936:2016 Electromagnetic compatibility of multimedia equipment – Emission requirements are adopted as the inspection standards for audio and video equipment to ensure the safety of consumers. Standards which were previously applicable shall cease to apply from 1 January 2025.
The regulations on the inspection method of listed commodities, the registration of conformity evaluation mode, the period of certification and the inspection period remain unchanged. The declaration of conformity must be re-signed before 31 December 2024 in accordance with the revised inspection standards. Otherwise, the declaration of conformity shall be invalid as of 1 January 2025 if the deadline is not met.
This revised version became effective on 1 November 2022, the date of publication.
For details, please refer to below link:
https://www.bsmi.gov.tw/wSite/public/Data/f1667526970174.pdf
Uruguay 乌拉圭
[法规草案] 2022 年 11 月 3 日，乌拉圭财政和经济部向 WTO 通报了一项法规草案，该法规草案规定了在该国销售的低压电气产品的基本安全要求，适用于交流电标称电压大于 50 伏至 1000 伏或直流电标称电压大于 75 伏至 1500 伏的电气和电子材料和设备。
On 3 November 2022, the Uruguayan Ministry of Finance and Economy notified the WTO of a draft regulation which regulates the essential safety requirements of low-voltage electrical products that are marketed in the country. It applies to electrical and electronic materials and equipment of nominal voltage greater than 50 volts and up to 1000 volts in alternating current or greater than 75 volts and up to 1500 volts in direct current, with certain exceptions.
Low Voltage Electrical Products which are marketed in the country must comply with the essential safety requirements defined in the RTM, which is listed in Annex I as well as all Low Voltage Electrical Products requiring minimum mandatory marking, in accordance with the provisions of the RTM.
The holder of authorization issued by the URSEA holds the technical, civil and criminal responsibility for the Low Voltage Electrical Products manufactured, imported or marketed by him, and cannot be transferred.
The reduced tests must be carried out under the respective technical standard, in order to demonstrate that the characteristics of a Low Voltage Electrical Product satisfactorily comply with the essential safety requirements.
电池 Batteries
Japan 日本
2022 年 11 月 4 日，日本经济产业省 (METI) 提出了对《电气用品技术要求条例的解释》(2013 年第 3 号) 文件的修订。 本次修订旨在对《电器用品技术要求条例解释》附件9中的锂离子二次电池技术标准进行修订。 自执行之日起，有两年的过渡期。各单位可以在 2022 年 12 月 3 日之前在线提交意见。
On 4 November 2022, the Japanese Ministry of Economy, Trade and Industry (METI) proposed an amendment to the document: Interpretation of Ordinance on Technical Requirements for Electrical Appliances and Materials (No. 3, 2013).
The amendment aims to revise technical standards on lithium ion secondary batteries in Annex 9 of the Interpretation of Ordinance on Technical Requirements for Electrical Appliances and Materials.
The technical standards for lithium ion secondary batteries shall be the harmonised standards as listed in Appendix 12 hereafter. A transition period of two years will apply from the date of enforcement.
Interested parties may submit their comments online until 3 December 2022.
Saudi Arabia 沙特阿拉伯
2022 年 11 月，沙特阿拉伯标准、计量和质量组织 (SASO) 发布 2018 年电池技术法规修正案。
In November 2022, the Saudi Arabian Standards, Metrology and Quality Organisation (SASO) issued an amendment to the Electric Batteries Technical Regulation of 2018.
The amendment changes Article 11(1) on transitional provisions to provide suppliers with a grace period of 180 days (the period was stated as 6 months) from the date of publication in the Official Gazette to comply with the requirements of this Technical Regulation. A one-year transitional period is also introduced in Article 11(2) in order to continue the trade of non compliant products which were lawfully placed on the market prior to the date of publication of this Technical Regulation.
The Regulation also updates the list of electric batteries’ products subject to this Regulation, and the relevant standards indicating the applicable technical requirements for batteries, which are set out in Annex (1).
家用电器 House Appliances
China Taiwan 中国台湾
BSMI颁布应施检验一般家用电器贮备型电热水器商品之相关检验规定修正草案。经济部能源局(BOE)修正于2022 年 9 月2日之公告。CNS 11010(102 年版)第 8.11 节「内桶容量」及第 8.14 节「每 24 小时标准化备用损失 Est,24」、其实测值(Est,24)须符合「贮备型电热水器容许耗用能源基准」规定。表列商品之修正后检验标准自公告日起实施，修正前检验标准自 2025年 7 月 1 日起停止适用。
详情请参考此链接: https://www.bsmi.gov.tw/wSite/public/Data/f1666341890572.pdf
The “Requirements on Minimum Energy Performance Standard and Energy Efficiency Rating
Labelling and Inspection for Electric Storage Tank Water Heaters (Amendment Draft),” proposed by the Bureau of Energy (BOE), Ministry of Economic Affairs, was notified on 2
September 2022 as per G/TBT/N/TPKM/407/Rev.1. As the requirements on the capacity of inner tank are included in the notified amendment draft, the BSMI proposes to remove the requirement of Section 8.11“Capacity of inner tank” of CNS 11010:2013 from BSMI’s testing items to avoid overlapping jurisdiction with the BOE.
Date of implementation: : 1 July 2025. Details, please see attached.
https://www.bsmi.gov.tw/wSite/public/Data/f1666318514060.pdf
能源效率要求 Energy Efficiency Requirements
Bahrain 巴林
[法规草案] 巴林就空调能源标签和最低能源性能要求技术法规草案通知世贸组织，目前该草案正在搜集意见中。
Bahrain notify WTO regarding Draft Technical Regulation on Energy Labelling and Minimum Energy Performance Requirements for Air-Conditioners
On 4 November 2022, the WTO published Notification G/TBT/N/BHR/643 regarding a draft technical regulation on energy labelling and minimum energy performance requirements for Air Conditioners.
Interested parties may submit their comments until 3 January 2023.
Belarus 白俄罗斯
2022 年 8 月，白俄罗斯国家标准化委员会发布了洗衣机能效标准第 2457-2020 号修正案。 修正案主要引入了一个新的附录G，增加了以下内容：
– 对能效和耗水量有影响的洗衣机设计要素的要求 (G.4)
– 控制方法 (G.5)
– 洗衣机能效标签 (G.6)
– 洗衣机技术文件 (G.7)
– 洗衣机在投入流通后的测试 (测量) 期间能效参数的允许偏差 (G.8)
此外，更新了强制性能效标签的设计。 该修正案于 2022 年 10 月 25 日生效。
In August of 2022, the Belarusian State Committee for Standardization published an amendment to Standard No. 2457-2020 on the Energy Efficiency of Washing Machines.
The amendment mainly introduces a new Annex G that adds the following:
– requirements for design elements of washing machines that have an impact on energy efficiency and water consumption (G.4)
– control methods (G.5)
– label of energy efficiency of washing machines (G.6)
– technical documentation for washing machines (G.7)
– permissible deviations of energy efficiency parameters of washing machines during tests (measurements) after their release into circulation (G.8)
Furthermore, the design of the mandatory energy efficiency label has been updated.
The amendment entered into force on 25 October 2022.
India 印度
能效局决定延长“超高清电视 (UHD TV)”、“微波炉” 和“家用液化石油气炉 (LPG stoves)” 现有星级评定表的有效期。
The Bureau of Energy Efficiency has decided to extend the validity of the existing star rating table and revised label period validity period for these appliances as below table:
|
Schedule |
Product |
New Validity |
|
Schedule 26 |
Ultra-High Definition (UHD) Televisions |
January 1st ,2021 to June 30th ,2023 |
|
Schedule 22 |
Microwave Oven |
March 1st ,2019 to December 31st ,2024 |
|
Schedule 9 |
Domestic Liquefied Petroleum Gas(LPG) Stoves |
January 1st ,2014 to December 31th ,2024 |
Saudi Arabia 沙特阿拉伯
[法规草案] SASO通知世贸组织关于SASO 2663:2021“空调-低容量窗式和单分体式空调的最低能源性能、标签和测试要求”的修订: SASO 2663:2021/AMD1 :xxxx。
该草案拟生效时间为2023年1月10日。
SASO notify WTO regarding SASO 2663:2021/AMD1 :xxxx “AIR CONDITIONERS – MINIMUM ENERGY PERFORMANCE, LABELLING AND TESTING REQUIREMENTS FOR LOW CAPACITY WINDOW TYPE AND SINGLE-SPLIT. the proposed date of entry into force: 10 January 2023.
其他 / 多主题产品 Others / Products with Multiple Subjects
India 印度
CPBC公布正式版《E-Waste (Management) Rules, 2022》, 取代2016版, 并于2023/04/01施行。
2016年版仅包含 “i) 信息技术和电信设备” 和 “ii) 消费电子产品” 两类别21项产品, 但新版纳入了以下5+1类别, 共计106项产品
ii-i) 光伏板
iii) 大小型电子电气设备
iv) 电气和电子工具 (大型固定工业工具除外)
v) 玩具、休闲和运动器材
vi) 医疗器械 (所有植入和感染产品除外)
vii) 实验室仪器
CPCB has released the official gazette 《E-Waste (Management) Rules, 2022》stating the implementation of 106 products to have mandatory E-waste EPR requirements.
Below are the categories of products covered under the rules.
i) Information technology and telecommunication equipment
ii) Consumer Electrical and Electronics and Photovoltaic Panels
iii) Large and Small Electrical and Electronic Equipment
iv) Electrical and Electronic Tools (With the exception of large- Scale Stationary Industrial Tools)
v) Toys, Leisure and Sports Equipment
vi) Medical Devices (With the Exception of All Implanted and Infected Products)
vii) Laboratory Instruments
The gazette also introduces revised recycling targets for the producers as per the following Schedule-III.
|
S. No. |
Year(Y) |
E-waste Recycling Target(by weight) |
|
1. |
2023-24 |
60% of the quantity of an EEE placed in the market in year Y-X, where ‘X’ is the average life of that product |
|
2. |
2024-25 |
60% of the quantity of an EEE placed in the market in year Y-X, where ‘X’ is the average life of that product |
|
3. |
2025-26 |
70% of the quantity of an EEE placed in the market in year Y-X, where ‘X’ is the average life of that product |
|
4. |
2026-27 |
70% of the quantity of an EEE placed in the market in year Y-X, where ‘X’ is the average life of that product |
|
5. |
2027-28 |
80% of the quantity of an EEE placed in the market in year Y-X, where ‘X’ is the average life of that product |
|
6. |
2028-29 onwards |
80% of the quantity of an EEE placed in the market in year Y-X, where ‘X’ is the average life of that product |
The new regulation will be applicable from 1st April, 2023.
These rules shall apply to every manufacturer, producer, refurbisher, dismantler and recycler involved in manufacturing, sales, transfer, purchase, refurbishing, dismantling, recycling and processing of e-waste or electrical and electronic equipment listed in Schedule-I (as per the gazette), including their components, consumables, parts and spares which make the product operational but shall not apply to –
Radio-active wastes as covered under the provisions of the Atomic Energy Act, 1962 (33 of 1962) and rules made there under.
India 印度
BIS公告再次推迟插头与插座标准IS 1293:2019的实施日。
目前2005和2019年版本均有效至 2023 年 10 月 23 日，至此之后 2005 年版将被撤销。
For plug and socket outlet, the standard was revised in IS 1293:2019 version. At present both 2005 and 2019 versions are valid. The will remain valid till 23 Oct. 2023 after which 2005 will be withdraw and 2019 shall remain in force.
South Africa 南非
SABS于2022/11/01开始实行ILAC EMC CoC的认证流程。
The SABS ILAC EMC CoC certification process was officially implemented as from 01 November 2022 – and the following application conditions will be applicable:
South Korea 韩国
2022 年 11 月11日，韩国国家技术标准局(KATS)公告以下3种标准修订。
目标标准:
– (修订) KC 61851-1：电动汽车充电系统第 1 部分：一般要求
– (制定) KC 62752：电动汽车模式 2 充电的线上控制与保护装置产品标准
– (已废除) KC 61851-22：电动汽车充电系统第 22 部分：交流电动车辆充电站的国际标准
修订内容:
– (KC 61851-1) 制定标准以支持推出移动充电器* (耐振动和耐冲击等) 融合新产品，并通过增加过载/短路保护测试项目来加强安全标准
* 可以使用装有电池的手推车和卡车在使用者希望的时间和地点充电的复合式产品
– (KC 62752) 制定单独的安全标准，增加原始安全标准 (KC 61851-1 和 KC 61851-22) 中针对便携式充电器*和耐老化测试要求
* 由线上控制与保护装置组成的充电器作为便携式产品
– 原始 KC 61851-22 的所有内容已移至 KC 61851-1 (修订版) 和 KC 62752 (已制定)。
In 11 November of 2022, the Korea Agency for Technology and Standards (KATS) published an amendment No. 2022-0513.
The amendment mainly introduces following:
– (Revised) KC 61851-1: Electric Vehicle conductive Charging System Part 1: General Requirements.
-(Established) KC 62752: In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD).
– (Withdraw) KC 61851-22: Electric Vehicle conductive Charging System Part 22: AC Electric Vehicle Charging Stations.
modify the content:
– (KC 61851-1) Establishment of standards to support the new product with mobile chargers* (vibration and shock resistance, etc.) and strengthen safety standards by adding overload/short circuit protection test items.
* A combination products that can be charged at the time and place the user desires by using a battery-equipped cart or truck.
– (KC 62752) Create a separate safety standard, adding the original safety standards (KC 61851-1 and KC 61851-22) for portable charger safety and aging test requirements
* A charger consisting of an In-cable control and protection device is used as a portable product
– All content of the original KC 61851-22 has been moved to KC 61851-1 (revisison) and KC 62752 (established).
Official website: https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=2&cid=23421
South Korea 韩国
2022 年 11 月22日，韩国国家技术标准局(KATS)修正第2022-0458号《电器安全标准 (第一类)》公告如下表。
|
原始公告 |
更正后公告 |
|
马桶电器安全标准 附录(通知编号2022-0458，2022.10.25) |
马桶电器安全标准 附录(通知编号2022-0458，2022.10.25 ) |
In 22 November of 2022, the Korea Agency for Technology and Standards (KATS) published an revision of No. 2022-0458.
|
Original announcement |
Update announcement |
|
Safety standard for toilet appliances Appendix(No. 2022-0458, 2022.10.25) |
Safety standard for toilet appliances Appendix(No. 2022-0458, 2022.10.25) |
UK 英国
英国政府将立法允许制造商在 2024 年 12 月 31 日之前取得由欧盟认可的合格评定机构 (CAB) 的CE 认证合格评定活动，可声明现有产品类型符合 UKCA 要求。产品仍须带有 UKCA 标识，并且需要在证书到期时或 2027 年 12 月 31 日之后 (以较早者为准) 接受英国认可机构的合格评定。
在 2024 年 12 月 31 日前取得欧盟认可的 CAB 完成适用产品的合格评定活动，即允许制造商申请 UKCA 标识，无需任何英国认可机构的参与，并根据现有的 CE 认证继续将其产品投放市场，直至颁发证书的有效期，或直到 2027 年 12 月 31 日 (以较早者为准)。
如果制造商在 2024 年 12 月 31 日前使用现有 CE 认证下的合格评定作为确保其产品符合 UKCA 要求的基础，建议在英国合格声明中包含相关英国指定标准和等同欧盟标准的列表，且适用于其产品的协调标准，以及执行合格评定程序的欧盟认可的 CAB (或根据与第三国的欧盟互认协议认可的 CAB) 的详细信息。
The UK government will be introducing legislation to allow conformity assessment activities undertaken by EU-recognised Conformity Assessment Bodies (CABs), for CE certification before 11pm on 31 December 2024, to be used by manufacturers to declare existing product types as compliant with UKCA requirements. Products must still bear the UKCA marking and will need to undergo conformity assessment with a UK Approved Body at the expiry of the certificate or after 31 December 2027, whichever is sooner.
Before 11pm on 31 December 2024, if an EU-recognised CAB has completed the relevant conformity assessment activities applying to a product, this would allow manufacturers to apply the UKCA mark without the need for any UK Approved Body involvement. They could continue to place their goods on the market on the basis of their existing CE certification following the end of this year, for the lifetime of the certificate issued, or until 31 December 2027 (whichever is sooner).
Where manufacturers are using conformity assessment under existing CE certification before 11pm on 31 December 2024 as the basis to ensure compliance with UKCA requirements for their products, we recommend that they include in the UK Declaration of Conformity the list of relevant UK designated standards and equivalent EU harmonised standards that apply to their product, as well as details of the EU-recognised CAB (or CAB recognised under an EU Mutual Recognition Agreement with a third country) which carried out the conformity assessment procedures.
More details are given at: https://www.gov.uk/guidance/ukca-marking-conformity-assessment-and-documentation
推荐文章
关注我们
4001183833 / 8009993668
Service-gc@tuv.com
www.tuv.com
德国莱茵TÜV是一家国际领先的技术服务供应商。在全球近60个国家和地区设有500多个分支机构，拥有超过20,000名员工，服务涵盖工业服务与信息安全，交通服务，产品服务，管理体系服务和莱茵学院与生命关怀。自1872年成立以来，我们一直为解决人类、环境和科技互动过程中出现的挑战，提供安全的、可持续的解决方案。作为一个独立、公正和专业的机构，我们长期致力于营造一个同时符合人类和环境需要的美好未来。
热门分享
