德国莱茵TÜV认证 TÜV Rheinland Accreditation

India 印度

关于从 IS 13252 (Part 1): 2020 和 IS 616: 2017 过渡到 IS/IEC 62368-1: 2023《音频/视讯、信息和通讯技术设备 第 1 部分 安全要求 (第 4 版)》的利益相关者咨询会议记录 “2025 年 7 月 11 日，在 MeitY 主导下与利益相关者讨论目前受 IS 13252 (Part 1): 2020 和 IS 616: 2017 规范的电子产品， 日后将由新标准 IS/IEC 62368-1: 2023 (第 4 版) 取代这两项现有标准的过渡事宜。预计将影响约 42 个产品类别，其中包括来自 IS 13252 的 27 个和来自 IS 616 的 15 个。
会议的重点摘要如下：
•产品标准迁移：MeitY将把在CRO 2021中规定的42个产品类别（27个符合IS 13252，15个符合IS 616）迁移到IS/IEC 62368-1:2023 。
•过渡期：所有产品迁移到IS 62368的实施期限将是自通知发布之日起的三年 。对于AR/VR设备，将设立一个新的产品类别，其实施期限为六个月 。然而，业界要求将AR/VR设备的实施期限延长至一年，并需提供相关理由以供进一步考虑 。
•新产品类别：AR/VR设备（扩增实境/虚拟现实）目前根据其技术规格被归类为ADPM或VDU 。为了避免模糊不清，将为AR/VR设备创建一个新的产品类别，并要求其符合IS 62368标准 。
•现有产品的处理：对于已注册且带有有效R号码的产品，业界提出了在保固或维护期内替换产品的需求 。主席表示，所有产品应在命令实施日期后迁移，但MeitY可能会考虑针对特殊情况给予豁免 。
•实施方式：业界曾建议分阶段实施迁移，但MeitY决定将所有42个产品类别一同迁移到IS 62368 。
•R号码的保留：业界询问在迁移到IS 62368时是否可以保留产品的R号码 。BIS（印度标准局）表示，由于标准正在迁移，可能需要根据系列指南对其实施准则进行修改 。
•系列和实施指南：业界应在2025年7月底前向MeitY提交有关42个产品类别系列指南的建议，并直接向BIS提交实施指南的建议 。
•实验室认证：对于IS 62368的实验室认证时间，会议讨论指出，一些实验室已经获得认证，BIS将加快实验室的认证过程，并认为三年的时间足够用于额外的实验室认证和命令实施 。
•标志标记：业界建议重新审视认证产品上的标准标志，提议标志上只显示R号码而不显示IS号码 。主席表示，这方面事宜由BIS负责，业界可向BIS提交建议 。
•产品类别整合：业界请求在迁移过程中整合某些产品类别，例如将「无线键盘」和「键盘」整合为一个类别 。主席同意，并表示在迁移至IS 62368时，电视、VDU和键盘等产品类别将会被整合 。
TÜV莱茵印度公司是第一家获得 IS/IEC 62368-1:2023测试资质的印度实验室。我们处于领先地位，能够提供专业的测试服务。

A stakeholder meeting was held on July 11, 2025, under the auspices of MeitY to discuss this migration. The meeting addressed electronic products currently regulated under IS 13252 (Part 1): 2020 and IS 616: 2017. The new standard, IS/IEC 62368-1: 2023 (Ed. 4), will replace both of these existing standards and is expected to impact approximately 42 product categories, including 27 from IS 13252 and 15 from IS 616.
Key Highlights of the Meeting:
•Product Standards Migration: MeitY will migrate 42 product categories notified in CRO 2021 (27 complying with IS 13252 and 15 complying with IS 616) to IS/IEC 62368-1: 2023.
•Transition Period: The implementation timeline for migrating all products to IS 62368 will be three years from the date of notification. For AR/VR devices, a new product category will be created with an implementation timeline of six months. However, the industry requested extending the implementation timeline for AR/VR devices to one year, subject to further justification.
•New Product Category: AR/VR devices (Augmented Reality/Virtual Reality), which are currently classified as ADPM or VDU based on their technical specifications, will have a new product category created to ensure compliance with IS 62368.
•Treatment of Existing Products: For already registered products with valid R-numbers, the industry raised the need for product replacement during warranty or maintenance periods. The Chair stated that all products shall migrate after the date of implementation of the Order; however, MeitY may consider exemptions in special cases.
•Implementation Approach: The industry had suggested a phased migration approach, but MeitY decided to migrate all 42 product categories to IS 62368 together.
•Retention of R-numbers: The industry inquired whether products could retain their R-numbers during migration to IS 62368. BIS stated that, as the standards are being migrated, modifications to the series guidelines and implementation modalities might be required.
•Series and Implementation Guidelines: The industry should submit suggestions on series guidelines for the 42 product categories to MeitY and implementation guidelines directly to BIS by the end of July 2025.
•Laboratory Accreditation: Regarding laboratory accreditation for IS 62368, it was discussed that few laboratories are already accredited, and BIS will expedite the accreditation process. It was agreed that three years is sufficient for additional lab accreditation and implementation of the Order.
•Standard Marking: The industry suggested revisiting the standard marking on certified products, proposing to display only the R-number instead of the IS number. The Chair noted that marking guidelines fall under BIS, and industry may submit suggestions to BIS for further consideration.
•Product Category Consolidation: The industry requested consolidating certain product categories during migration, such as combining “Wireless Keyboards” and “Keyboards” into one category. The Chair agreed and stated that, during migration to IS 62368, product categories like TVs, VDUs, and Keyboards will be consolidate
TUV Rheinland India Pvt. Ltd. is the first Indian laboratory to be accredited for IS/IEC 62368-1:2023. We are in a leading position to provide professional testing services.

资讯 / 电信 ITE / Telecom

Argentina阿根廷

阿根廷ENACOM发布第 928/2025 号决议 2025 年 6 月 17 日，阿根廷国家通信管理局 (ENACOM) 发布了第 928/2025 号决议。该决议将 414-415 MHz 和 424-425 MHz 频段用于私人用途无线电链路集中系统 (SRCEP)。

On June 17, 2025, the National Communications Authority of Argentina (ENACOM) issued Resolution 928/2025. The resolution uses the 414-415 MHz and 424-425 MHz frequency bands for the Radio Link Centralized System (SRCEP) for private use.

Australia澳大利亚

澳大利亚ACMA就2 GHz移动卫星服务 (MSS) 频段分配征求意见
[法规草案] 2025年7月9日，澳大利亚通信和媒体管理局 (ACMA) 就2 GHz移动卫星服务 (MSS) 频段分配设计和关键技术参数向公众征求意见。

On 9 July 2025, the Australian Communications and Media Authority (ACMA) solicited public comments on the design and key technical parameters for the 2 GHz Mobile Satellite Service (MSS) band allocation.

Belarus白俄羅斯

白俄罗斯更新调频服务国家频率分配表
白俄罗斯共和国部长会议于2025年6月6日通过了第303号决议，批准了新版白俄罗斯共和国国家频率分配表 (NTFA)。

The Council of Ministers of the Republic of Belarus adopted Resolution No. 303 of June 6, 2025, which approved a new version of the National Table of Frequency Allocations (NTFA) of the Republic of Belarus.
The approval of the new edition of the NTFA will contribute to:
– further development of mobile broadband communications and related services based on modern 4G, 5G and 6G technologies
– ensuring stable and accessible communications for users
– reliable operation of services related to ensuring security
– competent spectrum regulation in the interests of the state and society

China中国

国家互联网信息办公室发布《关于卫星直连业务终端设备管理的通知》
主要内容如下：
1. 本规定适用于在境内提供终端设备卫星直连服务、在境内使用终端设备卫星直连服务以及生产、组装、提供、销售支持境内卫星直连服务的终端设备的国内外单位。
2. 接入境内公用电信网并在境内使用调频的终端设备，应依照《中华人民共和国电信条例》和《中华人民共和国无线电管理条例》的规定，取得相关许可和批准。
3. 提供卫星直连服务的终端设备以及在境内使用的终端设备，只能接入境内合法运作的卫星通讯系统。
4. 本规定自2025年6月1日起施行。

India印度

MTCTE针对特定电信设备发布专门测试认证标准
印度通讯工程中心 (TEC) 针对以下五种电信设备，制定适用于MTCTE临时证书的专门测试要求：

申请规范要点：
•申请人需提交由 ILAC 认可实验室 (非边境共享国家/地区) 签发的 EMI/EMC 和安全参数测试报告。
•技术参数可以透过 SDOC (自我符合声明) 方式提交。若使用 SDOC 代替测试报告，则该些参数将视为豁免项目，并将签发有效期为两年的临时证书。
•由 ILAC 认可实验室出具的测试报告，自提交至 MTCTE 入口网站之日起不得超过两年
•申请人还必须在随 MTCTE 申请提交的物料清单 (BoM) 文件中注明此类产品的电压、电流和功率需求规格。
•对于上述未获得ITSAR通知的产品，申请人须在相应设备产品类别的ITSAR收到通知后，将其签发的临时证书转换为正式MTCTE证书，并补做安全性测试。

India Telecommunication Engineering Centre (TEC) released new certification criteria for telecom equipment with specialized test requirements under the MTCTE scheme. The affected equipment types include:

Important Requirements:
•The applicant is required to submit test reports from ILAC accredited labs (other than from border sharing nations) for EMI/EMC and Safety parameters.
•Technical parameters may be submitted via SDOC (Self-Declaration of Conformity). If SDOC is used in place of test reports, the parameters will be treated as exempted, and a 2-year provisional certificate will be granted
•The test reports issued by ILAC accredited labs should not be older than two years on the date of submission on MTCTE Portal.
•The applicant is required to mention the specifications in terms of voltage, current & power requirements for such products in the Bill of Material (BoM) file submitted along-with MTCTE application.
•When ITSARs are notified for relevant products, applicants must convert the provisional certificate into a full MTCTE certificate and perform the necessary security testing.

India印度

印度发布《2025年低6GHz频段低功率和极低功率无线存取系统 (包括无线局域网络) 使用规则草案》
[法规草案] 印度电信部 (DoT) 于2025年5月19日发布了《2025年低6GHz频段低功率和极低功率无线存取系统 (包括无线局域网络) 使用规则草案》。此规则适用于5925-6425MHz频段，并将于《官方公报》公布后立即生效。低功率室内 (LPI) 设备的最大 EIRP 为 1 W，超低功率 (VLP) 室外设备的最大 EIRP 为 25 mW。

The Department of Telecommunications (DoT) of India published the Draft Use of Low Power and Very Low Power Wireless Access System including Radio Local Area Network in Lower 6 GHz band Rules, 2025 on May 19, 2025. These Rules apply to the 5925-6425 MHz frequency band and will come into effect once published in the Official Gazette. Low Power Indoor (LPI) devices will have a max EIRP of 1 W, and Very Low Power (VLP) Outdoor will have a max EIRP of 25 mW.

India印度

印度TEC延长部分产品MTCTE认证接受ILAC 测试报告的截止日期
2025 年 6月 26 日，印度电信工程中心 (TEC)发布通知，宣布非边境共享国家的 ILAC 测试报告的期限可针对特定产品 延长至2025 年 12 月 31 日。这些测试报告的签发日期应在提交至 MTCTE 门户网站之日两年内。相关产品包括：
– 蜂窝网络基站；
– SIM 卡；
– 甚高频 (VHF) 超高频 (UHF) 无线电设备系统；
– E波段固定无线电中继系统。

On 26 June 2025, the Telecommunication Engineering Centre (TEC) of India issued a notice announcing that the deadline for ILAC test reports for non-border sharing countries could be extended until 31 December 2025 for specific products. These test reports should be issued within two years from the date of submission to the MTCTE portal. Related products include:
– cellular base stations;
– SIM card;
– Very High Frequency (VHF) Ultra-High Frequency (UHF) radio equipment systems;
– E-band fixed radio relay system.

 

India 印度

印度TEC延长 PON 系列宽带设备豁免期限

2025 年 6 月 26 日，印度电信工程中心 (TEC) 发布通知，更新了 MTCTE 下 PON 系列宽带设备的文件要求和豁免。
更新内容包括: 将任何 PON 接口的协议测试豁免期限从2025年6月30日延长至 2025 年 12 月 31 日，并将申请人/原始设备制造商 (OEM) 针对自动激光器关闭 (ALS) 或自动电源关闭 (APSD) 的自我符合性声明的接受期限从2025年6月30日延长至 2025 年 12 月 31 日。

On June 26, 2025, the Telecommunication Engineering Centre (TEC) of India issued a notice updating the documentation requirements and exemptions for PON series broadband devices under MTCTE. The updates include extending the protocol test exemption period for any PON interface from June 30, 2025 to December 31, 2025, and extending the acceptance period for applicant/original equipment manufacturer (OEM) self-declaration of conformity for Automatic Laser Shutdown (ALS) or Automatic Power Shutdown (APSD) from June 30, 2025 to December 31, 2025.
India 印度

印度TEC延长 MTCTE 下部分 ER 的通用豁免时限
2025 年 6 月 26 日，印度电信工程中心 (TEC) 发布通知，宣布将 MTCTE 认证体系中的下列产品的通用豁免 (无需提交测试报告) 延长至 2025 年 12 月 31 日，或另行通知。
•移动无线集群系统；
•蜂窝网络中继器；
•精密授时协议 (PTP) 主设备；
•甚高频 (VHF) 超高频 (UHF) 无线电系统设备；
•PTP PMP 微波固定无线电系统；
•ADSLx；
•VDSLx；
•光纤 (单模)；
•光纤 (电缆)；
•高频无线电系统；
•GSO VSAT/GSO 用户终端；
•NGSO 终端/NGSO 集成网关。

On 26 June 2025, the Telecommunications Engineering Centre (TEC) of India issued a notice announcing the extension of the general exemption (no test report required) for the following products in the MTCTE certification scheme until 31 December 2025 or until further notice.
•mobile wireless trunking systems;
•cellular repeaters;
•Precision Timing Protocol (PTP) master equipment;
•Very High Frequency (VHF) Ultra High Frequency (UHF) radio system equipment;
•PTP PMP Microwave Fixed Radio System;
•ADSLx；
•VDSLx；
•optical fiber (single-mode);
•Fiber optics (cables);
•high-frequency radio systems;
•GSO VSAT/GSO user terminals;
•NGSO Endpoints/NGSO Integration Gateways.

India 印度

BIS发布IS 18112修订指南

BIS于2025年6月23日公布《Revised Guidelines for Implementation of IS 18112 ‘Digital Television Receiver for Satellite Broadcast Transmission Specification’》。
所有TV set都须符合IS 18112 规定的接收数字卫星免费电视 (FTA) 和广播讯号的数字电视 (DTV) 接收机的标准，且须于2025年10月26日前完成标准更新。
2025年9月26日起 (强制前一个月) 可开始受理申请，2025年10月26日之后, 仅符合IS 616 的型号皆须自证书上移除。2025年10月26日之后所有贩卖至印度的TV 都必须同时符合IS 616和IS 18112。

BIS has released revised guidelines for the applicants of all television sets to incorporate the requirements of ‘Digital Television Receiver for Satellite Broadcast Transmission’ as per IS 18112:2022, along with the safety requirements as per IS 616:2017/IEC 60065 : 2014.
1.All existing licensees must apply for an inclusion as per IS 18112:2022, along with the safety requirements of IS 616:2017/IEC 60065 : 2014, as per the ‘Guidelines for Change in Scope of Licence (CSoL)’ following the series guidelines for Plasma/ LCD/ LED/ Televisions incorporating Digital Television Receiver for compliance.
2.After the last date of implementation i.e. 26 Oct 2025  , models complying only with IS 616: 2017/IEC 60065: 2014 will be deleted from the scope of the licence.
3.Applications received as per IS 616:2017/IEC 60065 : 2014 may be processed one month before the last date for the implementation of IS 18112:2022 i.e. 26 Oct 2025.
4.The applicants are also required to submit an undertaking confirming their compliance with IS 18112:2022 .
5.Any new applications to get licence for Plasma/ LCD/ LED/ Televisions as per IS 616 : 2017/IEC 60065 : 2014 and IS 18112 : 2022 have to submit a new applications under Grant or Inclusion as per the case applicable.
6.All applications received for Plasma/ LCD/ LED/ Televisions as per IS 616:2017/IEC 60065 : 2014, pending after the last date of implementation, will be automatically rejected.
7.Licences after getting necessary approvals from BIS shall display the Indian Standard no.s IS 616/IEC 60065 as well as IS 18112. There shall be only one single licence number for both the above specifications which shall be displayed below the Standard Mark.

Indonesia 印度尼西亚

印度尼西亚KOMDIGI扩大电信设备合规要求
[法规草案] 2025年7月7日，印度尼西亚通信和数字事务部 (KOMDIGI) 发布了一份部长令草案，其中列出了必须符合印度尼西亚技术标准并接受认证的电信工具和其他具有电信功能的设备。此举旨在落实2024年通信和信息部第3号条例第33条关于电信设备认证的规定。

On July 7, 2025, the Indonesian Ministry of Communications and Digital Affairs (KOMDIGI) issued a draft ministerial decree listing telecommunications tools and other equipment with telecommunication capabilities that must comply with Indonesian technical standards and be certified. This move aims to implement the provisions of Article 33 of the Ministry of Communications and Information Regulation No. 3 of 2024 on the certification of telecommunications equipment.
The draft covers the following:
– Identification of a list of telecommunications equipment and/or telecommunications equipment that must comply with technical standards, including other tools and/or equipment with telecommunications functions;
– The list of telecommunications equipment and/or telecommunication devices and other tools and/or equipment with telecommunication functions shall be compiled on the basis of the customs HS code in accordance with the provisions of laws and regulations;
– The introduction of the customs HS code in the Ministerial Decree is only used as a means of administrative supervision, and is not used as a reference for determining the HS code of the type of goods in the customs settlement process.
– If telecommunications equipment and/or telecommunications installations and other tools and/or equipment with telecommunications functions are not already listed in the annex to this Ministerial Decree, they are still required to comply with the technical standards;
– This draft Ministerial Decree shall enter into force within 30 (thirty) calendar days from the date of its determination.

Indonesia印度尼西亚

印度尼西亚电正在制定关于 LTE 和 IMT-2020 技术标准的法令草案
[法规草案] 印度尼西亚通信和数字事务部 (KOMDIGI) 于2025年7月8日发布了一份关于基于LTE技术标准和IMT-2020技术标准的电信设备和/或移动电信设备技术标准法令草案的公告。该法令草案旨在改进2024年第352号法令，并包括更新，例如为LTE和IMT-2020技术增加2.6 GHz频段的工作频率；在IMT-2020技术标准基础上增加中继器技术标准；技术标准要求参数中包括工作频率、输出功率、输出射频频谱、ACLR、OBUE、杂散发射、阻塞特性。

Kementerian Komunikasi dan Digital (Komdigi) of Indonesia published an announcement on July 8, 2025 about the Draft Decree on Technical Standards for Telecommunication Equipment and/or Mobile Telecommunication Devices based on LTE technology standards and IMT-2020 technology standards. This Draft Decree aims to improve Decree No. 352 of 2024, and includes updates such as adding working frequencies in the 2.6 GHz band for LTE and IMT-2020 technology; adding repeater technical standards based on IMT-2020 technology standards; and including working frequency, output power, output RF spectrum, ACLR, OBUE, spurious emission, and blocking characteristics in the parameters of technical standard requirements.

South Korea 韓國

RRA 發佈關於部分修訂無線設備適用性評估測試方法 (KS X 3123) 的通知

國家無線電研究機構 (RRA) 發佈了關於部分修訂無線設備適用性評估測試方法 (KS X 3123) 的通知 – 衛星行動通訊無線設備。修訂後的標準現已實施，旨在簡化衛星行動通訊設備的測試，並減輕測試機構的負擔，從而最大限度地減少應用過程中的混亂。

National Radio Research Agency published Notification of partial revision of the wireless equipment suitability assessment test method (KS X 3123)_Satellite mobile communication wireless equipment device. The revised standards are now being implemented to simplify testing for satellite mobile communication devices and reduce the burden on testing agencies. This aims to minimize confusion during application.

South Korea韩国

RRA 发布关于部分修订无线设备适用性评估测试方法 (KS X 3123) 的通知
国家无线电研究机构 (RRA) 发布了关于部分修订无线设备适用性评估测试方法 (KS X 3123) 的通知 – 卫星行动通讯无线设备。修订后的标准现已实施，旨在简化卫星行动通讯设备的测试，并减轻测试机构的负担，从而最大限度地减少应用过程中的混乱。

On June 25, 2025, the National Radio Research Agency (RRA) of South Korea issued Announcement 2025-44 for public comment on the draft revision of the Specific Absorption Rate (SAR) standard, which is as follows:
•Specific absorption rate (SAR) measurements will be based on the national standard KS C3350 (paragraph 1 of Article 3 of the draft);
•The implementation date of the announcement is April 1, 2026, and the announcement provides transitional measures (Articles 1 and 2 of the Supplementary Provisions of the Draft) to ensure that products before the implementation date are subsequently found to be compliant;
•Clarify the numbers of specific clauses in the administrative provisions (standards for electromagnetic wave human protection) related to the scope of application of the announcement, and revise the relevant terms (Article 2 of the Draft);
•editorial revisions to the provisions, including the deletion of unnecessary abbreviations and article numbers, the removal of repetitive terms, and the addition of Korean indications to the names of standardization bodies (Articles 1, 2, 3.1 and 2 of the draft)

 

South Korea韩国

「电磁波兼容性测试方法」部分修订通知
韩国国国立无线电波研究院于2025年7月11日公告第2025-50号通知。依据《有关广播通信器材等之适合性评价的公告》第4条第3项，特此公告修订电子波兼容性测试方法。本测试方法自公告后经过1个月之日起施行。

On July 11, 2025, the National Radio Research Agency issued Announcement No. 2025-50.
In accordance with Article 4, Paragraph 3 of the “”Notification on the Conformity Assessment of Broadcasting and Communication Equipment,”” the Electromagnetic Compatibility (EMC) Test Method is hereby partially amended as follows: Partial Amendment to the “”Electromagnetic Compatibility (EMC) Test Method””
The following amendments are made to the “”Electromagnetic Compatibility Test Method””:
In Article 3, Paragraph 21, “2017” is revised to “2024”.
In Article 4, Paragraph 3, Subparagraph 2, “The test shall be KN 62920” is revised to “The test shall be KN 62920 as specified in Annex 1”.
In Article 4, Paragraph 3, Subparagraph 3, “2022” is revised to “2017”.
In Article 4, Paragraph 3, Subparagraph 4, “2022” is revised to “2013”.
In Article 4, Paragraph 9, “The test shall be KN50/KN 51” is revised to “The test shall be KN50/KN 51 as specified in Annex 2”.
In Article 4, Paragraph 11, Subparagraph 1, “2020” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 2, “2020” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 4, “2014” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 5, “2014” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 6, “2014” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 7, “2020” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 8, “2014” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 10, “KS X 3132:2014” is revised to “KS X 3127:2024”.
In Article 4, Paragraph 11, Subparagraph 11, “2014” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 12, “2014” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 13, “2014” is revised to “2024”.
In Article 4, Paragraph 11, Subparagraph 15, “2014” is revised to “2024”.
In Article 4, Paragraph 13, “KS C IEC 60947-1:2017 / KS C IEC 60947-2:2022 / KS C IEC 60947-4-1:2022” is revised to “KS C IEC 60947-1:2014 / KS C IEC 60947-2:2019 / KS C IEC 60947-4-1:2018”.
In Article 4, Paragraph 17, “KS B 6955:2019” is revised to “KS B ISO 8102-1:2020”.
In Article 4, Paragraph 18, “KS B 6945:2019” is revised to “KS B ISO 8102-2:2021”.
In Article 4, Paragraph 19, “2003” is revised to “1999”. Effective Date:
This test method shall take effect one month after the date of its announcement.

Ukraine乌克兰

乌克兰NCEC新增28和77/78频段 (5G NR) 核准流程
乌克兰国家电子通信、无线电频谱和邮政服务提供国家管理委员 (NCEC) 于2025年6月4日公布了第362号决定，该决定修订了2025年2月12日的第81号决定。本决定为审批过程增加了第28和77/78段(5G NR)。目前这些频段还没有运营商商业许可证。

The National Commission for the State Regulation of Electronic Communications, Radio Frequency Spectrum, and the Provision of Postal Services (NCEC) of Ukraine published Decision No. 362 on June 4, 2025, which amended Decision No. 81 of February 12, 2025. This Decision adds Band 28 and Band 77/78(5G NR) for the approval process. No operator commercial licenses exist for these bands at this time.

 

家用电器 House Appliances

Australia澳大利亚

澳大利亚空调系统新规定
自2025年7月1日起，在澳大利亚进口或制造使用全球暖化潜势 (GWP) 较高的氢氟碳化物 (HFC) 的小型多头分离式空调系统将属于非法行为。
某些空调设备以及设计使用全球暖化潜势值 (GWP) 超过750的冷媒的设备将被禁止。

Australia is changing permitting for imported air conditioning equipment parts orders and equipment.
From 1 July 2025, it will be illegal to import or make small multi-head split air conditioning systems that use hydrofluorocarbons (HFCs) with a high global
Certain air condition equipment and equipment designed to use refrigerant over 750 GWP is banned.
This ban builds on earlier rules that already apply to small single-head split systems, portable units and window or wall air conditioners.
The ban applies to outdoor units for multi-head split systems, including variable refrigerant flow systems, if the equipment:
•is made to cool or heat indoor spaces for comfort
•has a refrigerant charge of 2.6 kg or less
•uses an HFC with a GWP higher than 750 (even if it is not charged when imported).
There are some exemptions and more bans may be introduced later.

Australia澳大利亚

关于家用前置式洗衣机在AS/NZS 60335.2.7标准及其认证有效期更新 “昆士兰政府电气安全办公室发布一份重要的新公告，本公告通告适用于符合 AS/NZS 60335.2.7 范围的家用前置式洗衣机 (滚筒洗衣机)。
AS/NZS 60335.2.7:2024 于 2024 年 11 月 29 日发布，自发布之日起有三年的过渡期。AS/NZS 60335.2.7:2020 的第1版修订于 2024 年 6 月 28 日发布，该修订的部分在发布时即适用，并针对第 20.106 条要求有两年的过渡期。这些过渡期是为了让现有设备设计能够修改以符合新要求。
自通知之日起，若有任何新发或续展的设备证书，且适用于条款 20.106，但该设备未能提供符合 AS/NZS 60335.2.7:2020 第 1 修订版条款 20.106 的评估和合格证据，则其认证日期将限于 2027 年 11 月 29 日。
注意：若认证为 AS/NZS 60335.2.7:2024，则必须遵守该标准的条款 20.106。
若该设备持有符合 AS/NZS 60335.2.7:2024 或 AS/NZS 60335.2.7:2020 (包括 2024 年第 1 修订版) 的合格测试报告，则其认证日期将为完整的 5 年。
自 2026 年 6 月 28 日以后，未经对条款 20.106 进行修订和适用的评估，将不允许对 AS/NZS 60335.2.7:2020 第 1 修订版进行认证。

This information notice applies to household front loading washing machines within the scope of AS/NZS 60335.2.7. AS/NZS 60335.2.7:2024 was published 29 November 2024 with three years transition period from the date of publication. Amendment 1 to AS/NZS 60335.2.7:2020 was published on 28 June 2024 with parts of the amendment applicable on publication and a 2 year transition period from the date of publication for the requirements of clause 20.106. The transition periods are to allow for existing equipment designs to be able to be modified to comply with the new requirements.
From the date of this information notice, any new or renewed certificates issued for equipment, where clause 20.106 would apply and that equipment does not have evidence of assessment and compliance to clause 20.106 of Amendment 1 of AS/NZS 60335.2.7:2020, will have a certification date limited to 29 November 2027.
Note: if certified to AS/NZS 60335.2.7:2024 then clause 20.106 of that standard will have to be complied with.
If the equipment has a compliant test report to AS/NZS 60335.2.7:2024, or AS/NZS 60335.2.7:2020 including Amendment 1:2024, the certification date will be for the full 5 years.
This does not allow for certification to AS/NZS 60335.2.7:2020 Amendment 1 after 28 June 2026 without assessment of clause 20.106 as amended and applicable from that date.

Chile智利

智利空调新能效协议 (PE No. 1/26/2:2023) 于2025年6月30日生效

智利通知关于空调的新能效协议 (PE No. 1/26/2:2023) 于2025年6月30日生效，并根据2025年6月24日的电子豁免决议第32.725号，与之前的协议 (PE No.1/26:2009) 共存，直到2026年4月30日。

The Republic of Chile hereby advises that, in relation to the Electricity and Fuel Board (SEC) energy efficiency analysis and/or test protocol for electrical products, notified on 19 July 2023 in document G/TBT/N/CHL/655, the new Energy Efficiency Protocol (PE No. 1/26/2:2023) will enter into force on 30 June 2025, pursuant to Electronic Exempt Resolution No. 32.725 of 24 June 2025, coexisting with the previous protocol (PE No.1/26:2009) until 30 April 2026.

Chile 智利

智利空调新安全协议 (PE No. 1/26:2009) 于2025年6月30日生效 智利通知关于2023年7月3日通报于文件 G/TBT/N/CHL/649 (关于空调) 的电气产品安全分析和/或测试协议 (SEC)，新的安全协议 (PE No. 1/26:2009) 根据2025年6月24日的电子豁免决议第32.725号于2025年6月30日生效，并将与之前的协议 (PE No. 1/26:2009) 共存，直到2026年4月30日。

The Republic of Chile hereby advises that, in relation to the Electricity and Fuel Board (SEC) safety analysis and/or test protocol for electrical products, notified on 3 July 2023 in document G/TBT/N/CHL/649, the new Safety Protocol (PE No. 1/26:2009) will enter into force on 30 June 2025, pursuant to Electronic Exempt Resolution No. 32.725 of 24 June 2025, coexisting with the previous protocol (PE No.1/26:2009) until 30 April 2026.

Israel 以色列

以色列提出强制性标准SI 900第2.6部分的首次修正案 “[法规草案] 以色列提出强制性标准SI 900第2.6部分（涉及固定式炉灶、炉台、烤箱及类似器具）的首次修订提案。本修订草案删除了希伯来文部分详述的该标准国家差异的以下内容:
– 删除第2部分详述的规范性引用文件；
– 删除第7部分 (标记和说明) 的国家差异，包括其第7.201至7.204节、图201及其所有脚注；
– 删除第10部分 (输入功率和电流) 的国家差异，以及其所有脚注

Proposed first amendment to the Mandatory Standard, SI 900 part 2.6, dealing with stationary cooking ranges, hobs, ovens and similar appliances. This draft amendment deletes the following from the standard’s national deviations detailed in the Hebrew section:
-Deletes the normative references detailed in Section 2 ;
-Deletes the national deviations to Section 7 – Marking and instructions, including its sub-sections 7.201 to 7.204, Figure 201 and all its footnotes;
-Deletes the national deviations to Section 10 – Power input and current, and all its footnote

Kuwait 科威特

科威特发布热水器能效标准草案
[法规草案] 科威特PAI与2025年7月7日发布了关于热水器的能源性能标准草案，评论截止日期为2025年9月5号。并计划在通过后的1年后生效。
TUV莱茵科威特公司是科威特能效EER公告机构。

Kuwait Public Authority for Industry released a draft energy performance standard for water heaters on July 7, 2025, with a comment deadline of September 5, 2025. It is scheduled to entry into force one year after its adoption.

Mexico 墨西哥

墨西哥发布空调的能源效率官方标准NOM-011-ENER-2024 “墨西哥发布官方标准NOM-011-ENER-2024：中央空调、整体式空调和分离式空调的能源效率，限值、测试方法和标签。
该标准将在其发布后的180个日历天生效 (2025年10月26日)。一旦这项墨西哥官方标准生效，将取消并取代NOM-011-ENER-2006。。

Mexicao published Official Standard NOM-011-ENER-2024: Energy efficiency of central, package and split-type air-conditioners. Limits, test methods and labelling.
The standard will enter into force 180 calendar days after the calendar day following its publication in the Official Gazette of the Federation (Oct. 26, 2025).
Once this Mexican Official Standard enters into force, it will cancel and replace NOM-011-ENER-2006.

South Korea 韩国

能源效率管理设备(MEPS)规范修订通知 “[法规草案] 韩国产业通商资源部于2025年7月30日发布附则（第2025-000号，2025年11月1日）:
第1条（施行日）本规定预计将在公告之日2025年11月1日起施行。
关于电动洗衣机、电动冷气机、电动冷暖气机、多功能电动热泵系统之修订事项，其施行日期如下：
1) 电动洗衣机、电动冷气机、电动冷暖气机、多功能电动热泵系统：自2025年11月1日起施行。
2) 内建安定器灯具：自2025年12月31日起施行。 该公告的意见搜集截止日为2025年9月28日。

On July 30, 2025, the Ministry of Trade, Industry and Energy of Korea issued the Supplementary Provisions (No. 2025-000), dated November 1, 2025:
Article 1 (Effective Date): This regulation is scheduled to take effect on November 1, 2025, the date of its official announcement.
Regarding the amendments related to electric washing machines, electric air conditioners, electric heating and cooling units, and multi-functional electric heat pump systems, the effective dates are as follows:
Electric washing machines, electric air conditioners, electric heating and cooling units, and multi-functional electric heat pump systems: Effective from November 1, 2025.
Lamps with built-in ballasts: Effective from December 31, 2025.
The deadline for public comments on this announcement is September 28, 2025.

UK 英國

英国提议更新家用滚筒式烘干机的生态设计和能源标签法规
[法规草案] 英国政府7月17日提议更新英国市场上家用滚筒式烘干机现有的生态设计和能源标签法规。
•对于生态设计，参照 (EU) 2023/2533。
•用于标签，参照 (EU) 2023/2534。
建议通过日期：2025年秋末
建议生效日期：2026年春季 (生态设计) / 2026年秋季 (能源标签)

The UK Government is proposing to update existing ecodesign and energy labelling regulations for household tumble dryers placed on the GB market. It is aim to mirror the EU’s new regulations for household tumble dryers in GB.
•for ecodesign, mirrors Regulation (EU) 2023/2533 in GB.
•for labelling, mirrors Regulation (EU) 2023/2534 in GB.
Proposed date of adoption: Late Autumn 2025
Proposed date of entry into force: Spring 2026 (eco-design) / Autumn 2026 (energy labelling)

 

能源效率要求 Energy Efficiency Requirements

EAEU 欧亚经济联盟

TR EAEU 048/2019能效法规再度延期至2028年9月1日
欧亚经济委员会理事会已决议将欧亚经济联盟TR EAEU 048/2019技术法规《关于耗能设备能效要求》的生效日期推迟至2028年9月1日。
欧亚经济联盟理事会的同一决定还将欧亚经济联盟委员会关于确定各类耗能设备标签形式及其设计规则的决定的生效日期推迟至2028年3月1日。该技术法规若干附录中规定的某些要求的生效日期也推迟了三年。
另外需注意即使欧亚经济联盟的能效法规再度延期，白俄罗斯国家强制性能源效率要求仍然有效。

The Council of the Eurasian Economic Commission, at the suggestion of Russia, postponed the entry into force of the technical regulation of the Eurasian Economic Union “On requirements for the energy efficiency of energy-consuming devices” to September 1, 2028.
This will make it possible to update a number of document requirements within the framework of amendments that are being prepared in accordance with the plan for developing technical regulations of the EAEU and amending them, and to complete the development and adoption of second-level acts necessary for the implementation of the technical regulations – a list of standards and energy efficiency labels for energy-consuming devices.
The same decision of the EEC Council postponed the entry into force of the decision of the Commission Council establishing the forms of labels for energy-consuming devices of various types and the rules for their design to 1 March 2028. The entry into force of certain requirements established in a number of appendices to the technical regulations was also postponed by three years.

 

电池 / Batteries

China中国

国家市场监督管理总局发布《锂离子电池编码规范》

国家市场监督管理总局于今年4月发布了新标准GB/T 45565-2025《锂离子电池编码规范》，旨在加强锂电池的质量管理和源头追溯。
该新标准将于2025年11月1日起生效。

In April, China SAMR published a new standard GB/T 45565-2025 – Coding regulations of lithium ion batteries, to enhance quality management and source tracebility of Lithium batteries.
This new standard will come into force on 1 November 2025.

China Taiwan 中国台湾

经济部标准检验局公告修正「户外电池储能系统案场验证技术规范」 [法规草案] 经济部标准检验局公告修正「户外电池储能系统案场验证技术规范」，本技术规范适用于设置户外之并网式锂系电池储能系统案场。

BUREAU OF STANDARDS, METROLOGY AND INSPECTION, MOEA Notice is hereby given, for the amendment of “Technical Specification for Certification of Outdoor Battery Energy Storage System Site

China Taiwan 中国台湾

经济部标准检验局修正放置型锂储能装置检验规定，将检验范围从原本电池容量20kWh以下扩大至100kWh以下，针对具有双向电力传输或太阳光电模块输入功能的装置实施强制检验。新规定要求符合CNS 62619、CNS 63056等多项国家标准，具并网功能者需额外符合电力转换系统相关技术规范，容量超过20kW的设备还需通过资安检测。检验方式采型式认可逐批检验或验证登录双轨制，20kWh以下产品自2026年7月1日起实施，20-100kWh产品自2027年7月1日起实施，证书有效期均为3年。

To support the global transition to net-zero emissions and align with national energy policies promoting
the use of renewable energy and energy storage appliances, the BSMI has included stationary lithium battery storage appliances with a capacity of up to 20 kWh in the mandatory inspection scope to ensure safety. As these appliances can be expanded based on user needs, the BSMI has proposed broadening the inspection scope to 100 kWh and require communications security inspections for power conversion system (PCS) with a capacity exceeding 20 kW to reduce potential threats to grid security. Conformity Assessment Procedures will remain unchanged.
For battery capacity up to 20 kWh: 1 July 2026.
For battery capacity over 20 kWh and not exceeding 100 kWh: 1 July 2027.

 

灯具 / LED Luminaiaries/LED

China Taiwan 中国台湾

经济部能源署废止「办公室及营业场所灯具节能标章能源效率基准与标示方法」 经济部能源署废止「办公室及营业场所灯具节能标章能源效率基准与标示方法」，并自2026年1月1日起生效。

ENERGY ADMINISTRATION, MOEA Order is hereby given, for the abolition of “Energy Conservation Labeling Program Requirements for Office and Business Area Lamps” (abolition shall become effective from 1st, January 2026)

Uruguay乌拉圭

URSEA规定能效标签强制实施阶段生效前，现有灯具库存的零售期限最长为 12 个月 URSEA 于 2025 年 6 月 4 日发布了第 225/025 号决议，灯具能源效率标签的每个阶段的零售期限最长为 12个月，适用于在此之前进入国内市场且未按照相关法规进行合格评定的现有库存灯具。。

MIEM Resolution S/N of 21/1/2025 established the Technical Regulation for Lamps, which incorporates LED and incandescent lamps (conventional and halogen) into the National Energy Efficiency Labeling System. This implies that the lamps must be certified under the UNIT 1218:2020 (LED) or UNIT 1159:2024 (incandescent) standard by a national Product Certification Body (OCP) registered for such purposes with Ursea and have the corresponding labeling. There are different phases for follow the regulation.
Ursea Resolution 225/025 of June 4, 2025, established a maximum period of 12 months from the mandatory entry into each phase for the retail sale of existing inventories of lamps imported into the country prior to the phase and that do not meet the requirements established in the Lamp Regulations. At the same time, it establishes that Ursea will subsequently require mandatory registration for the use of the energy efficiency label for lamps. This will apply to domestic importers or manufacturers.

 

其他 / 多主题产品 Others / Products with Multiple Subjects

Australia澳大利亚

新南威尔士州NSW公告延迟锂离子电动微型交通工具安全要求的强制执行日期
根据《2017 年天然气和电力 (消费者安全) 法案》，原定于2025年8月1日实施的测试和认证要求已推迟至2026年2月1日，以回应行业反馈。
更多详细信息可考此链接。

E-bikes, e-scooters, e-skateboards, self-balancing scooters and the lithium-ion batteries used to power these devices are now ‘declared electrical articles’ under the Gas and Electricity (Consumer Safety) Act 2017.
This means that these products need to comply with the prescribed mandatory safety standards before they can be sold in NSW.
From 1 February 2025, lithium-ion e-micromobility devices, such as e-bikes and e-scooters, sold in NSW must comply with the prescribed safety standards. These requirements have been introduced to ensure that only safe and compliant products are available in the market, reducing the risk of fires.
Testing and certification requirements under the Gas and Electricity (Consumer Safety) Act 2017 have been postponed from 1 August 2025 until 1 February 2026, in response to industry feedback. NSW Fair Trading will continue to conduct educational inspections to ensure businesses understand their legal obligations with regard to the product safety requirements.
From 1 February 2026, e-micromobility devices and their associated lithium-ion batteries must be tested, certified and marked prior to sale in NSW. From 1 February 2026, NSW Fair Trading may take enforcement action against non-compliance and penalties may apply for breach of the Product Safety Standards.

Chile智利

SEC 延后 PE N°8/11:2023 的生效日期

SEC 将 PE N°8/11:2023 的生效日期延后至 2026 年 1 月 2 日。PE N°8/11:2023 涵盖家庭自动化设备，例如电气装置中使用的电子开关，包括调光开关、调光开关、调光器 (调光开关)。

SEC postponed the entry-in-force of PE N°8/11:2023 to Jan 02, 2026
PE N°8/11:2023 incluse Domotics such as electronic switches used in electrical installations including dimmer switches, dimmer switches, dimmer switches dimmers (dimmer switches).

Chile 智利

智利发布多项产品的全认证程序草案 “[法规草案] SEC发布或更新了一些针对智利不同产品的草案。
– PE N° 6/04:2025，砂光机和抛光机
– PE N° 6/02:2025，螺丝起子和冲击扳手
– PE N° 1/02:2025，熨斗
– PE N° 1/44:2025，电热泵
– PE N° 6/06:2025 ，电锤
– PE Nº 6/3:2024，砂轮机、盘式抛光机、盘式砂光机
– PE Nº 8/7:2024， 打印机
– PE N °1/04:2025， 更新洗碗机的认证协定
– PE N° 3/23:2025， 家用固定电气装置中使用的金属接线盒或配电箱
– PE N° 1/43:2025，增压水泵 (移动泳池泵)

SEC published or updated Some draft Protocols about different products.
– PE N° 6/04:2025, Safety certification procedure for sanders and polishers for Chile
– PE N° 6/02:2025, Safety certification procedure for
screwdrivers and impact wrenches
– PE N°. 1/02:2025 – Irons
– PE N° 1/44:2025 – Electrical heat pumps
– PE N° 6/06:2025 – Electric hammers
– PE Nº 6/3:2024 – Grinding Wheel Machine，Disc Polishing Machine，Disc Sander
– PE Nº 8/7:2024 – Printer
– Update of PE N° 1/04:2025 Dishwasher
– PE N° 3/23:2025 Metal junction or distribution boxes for use in fixed electrical installations for domestic use.
– PE N° 1/43:2025 – Water booster pumps (mobile pool pumps)

China中国

工业和信息化部公开征集对17项强制性国家标准制修订计划项目的意见 [法规草案] 工业和信息化部公开征集对17项强制性国家标准制修订计划项目的意见，其中包括《移动电源安全技术规范》、《无线电发射设备安全要求》、《光伏组件安全技术要求 》等。

The Ministry of Industry and Information Technology publicly solicited opinions on 17 mandatory national standard formulation and revision projects, including “Power Bank Safety Technical Specifications”, “Radio Equipment Safety Requirements”, “Photovoltaic Module Safety Technical Requirements”, etc.

Ecuador厄瓜多尔

厄瓜多尔发布电动机能效草案
[法规草案] 厄瓜多尔发布电动机能效草案 (PRTE INEN) No. 145 (1R)。
本草案适用于在厄瓜多尔销售的以下产品，无论是国产的还是进口:
•单相鼠笼式风冷交流感应电动机，额定输出功率为0.18 kW至1.5 kW，单转速，2、4或6极，分相或电容启动，开环或闭环。
•三相鼠笼式交流感应电动机，额定输出功率为0.746 kW至373 kW，单转速，2、4、6或8极，通用，开环或闭环。

Ecuador published Draft Technical Regulation of the Ecuadorian Standardization Institute (PRTE INEN) No. 145 (1R), “”Energy efficiency of electric motors””
The notified Resolution applies to the following products, whether domestic or imported, marketed in Ecuador:
•Single-phase, squirrel-cage, air-cooled AC electric induction motors, with a rated output of 0.18 kW to 1.5 kW, single rotational frequency, 2, 4 or 6 poles, split-phase or capacitor-start, open- or closed-loop.
•Three-phase, squirrel-cage AC electric induction motors, with a rated output of 0.746 kW to 373 kW, single rotational frequency, 2, 4, 6 or 8 poles, for general use, open- or closed-loop.

Ecuador厄瓜多尔

厄瓜多尔发布家用电动清水泵的能源效率修正案 “[法规草案] 厄瓜多尔发布技术法规PRTE INEN No. 094的第一修订草案(1R): 《额定功率为0.180 kW至0.750 kW的家用电动清水泵的能源效率》。
该通报技术法规适用于在厄瓜多尔销售的、使用单相鼠笼式感应电动机的家用电动清水泵，其功率范围为0.180 kW至0.750 kW，无论是国产的还是进口的。

Ecuador published Draft first revision (1R) of Ecuadorian Technical Regulation PRTE INEN No. 094: “”Energy efficiency of motor-driven domestic clean water pumps with a power rating of 0.180 kW to 0.750 kW””.
The notified Technical Regulation applies to motor-driven domestic clean water pumps using single-phase squirrel-cage induction motors with a power rating of 0.180 kW to 0.750 kW, whether domestic or imported, marketed in Ecuador.

India 印度

印度符合 IS 16444 标准的智慧电表测试报告接受指南 “印度发布BIS 认可实验室所出具的符合 IS 16444 标准的智慧电表测试报告接受指南。
自2025年6月12日起，提交实验室测试的智慧电表，其EMI/EMC和安全测试报告中必须明确注明通讯模块的型号/代码。

India publishes Guidelines for Acceptance of Test Reports for the Smart Electricity Meters as per IS 16444 from the BIS recognized lab.
Starting from Jun-12 of 2025, Smart Electricity Meters submitted to labs for testing, the model number/code of the communication module must be clearly mentioned in the test reports for EMI/EMC and Safety.”

Mexico 墨西哥

墨西哥发布官方标准 NOM-014-ENER-2025，关于电动磊的能源效率要求
墨西哥官方标准 NOM-014-ENER-2025 已在联邦官方公报 ((DOF) 上发布。
该标准规定了标称功率为 0.180 kW 至 2.238 kW 的单相、感应、鼠笼式、风冷交流电动磊的能源效率要求、测试方法和标记要求。

Mexican Official Standard NOM-014-ENER-2025 was published in the Official Gazette of the Federation (DOF).
This standard establishes the energy efficiency requirements, test methods, and marking requirements for single-phase, induction, squirrel-cage, air-cooled, alternating current electric motors with a nominal power of 0.180 kW to 2.238 kW.
Entry into force:
Stage 1: 180 calendar days after the day following its publication in the Official Gazette of the Federation (DOF), entering into force on November 30, 2025.
Stage 2: Two years after the day following its publication, entering into force on June 3, 2027.

New Zealand 新西兰

37 项澳洲/新西兰共同采用的 IEC 标准及其修正案
[法规草案] 新西兰标准局正在就37项澳洲/新西兰采用的IEC标准及其修订案，以及一项现有AS/NZS联合标准的修订案进行咨询。建议的AS/NZS标准由联合技术委员会EL-002「家用及类似用途电器、小型电力变压器和电源安全」制定。

Standards New Zealand is consulting on 37 Australian/New Zealand adoptions of IEC standards and amendments and one revision of an existing joint AS/NZS standard. The proposed AS/NZS standards were prepared by Joint Technical Committee EL-002 Safety of household and similar electrical appliances and small power transformers and power supplies.

New Zealand 新西兰

新西兰正在就手持式切割机的特殊要求草案进行咨询 [法规草案] 新西兰标准局正在就澳洲/新西兰联合标准 AS/NZS 62841.2.22:202X 电动手持工具、可移动工具和草坪及园艺机械 – 安全 – 第 2.22 部分：手持式切割机的特殊要求草案进行咨询。

Standards New Zealand is consulting on a draft joint Australian/New Zealand standard, AS/NZS 62841.2.22:202X Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2.22: Particular requirements for hand-held cut-off machines.

South Korea韩国

关于《电器及消费品安全管理指南》修订草案的行政通知 [法规草案] 2025年7月16日依据《行政程序法》国家技术标准局公告 第2025-0187号第46条，针对《电气用品与生活用品安全管理法实施指南》部分条文拟进行修正，现公告草案，征求公众意见。

On July 16, 2025, in accordance with Article 46 of the Administrative Procedures Act, the Korean Agency for Technology and Standards (KATS) issued Announcement No. 2025-0187 to propose partial amendments to the Guidelines for the Electrical Appliances and Household Goods Safety Control Act. A draft of the amendments is hereby published to solicit public comments.
Background and Purpose of the Amendment:
To improve the efficiency of safety management for electrical appliances and to align with current systems and practical needs, certain parts of the Guidelines for the Electrical Appliances and Household Goods Safety Control Act are proposed to be supplemented and revised. The key changes focus on clarifying the scope of application, product classifications, applicable testing standards, and alignment with related standards. Summary of Key Amendments:
1.Addition of detailed product classifications and examples:
To help the industry determine whether products fall under safety management, examples and classification guidelines are provided.
2.Update of applicable standard versions:
Where outdated safety standards are referenced in the original guidelines, they will be updated to the most recent versions.
3.Adjustment of testing and verification procedures:
Specifies what types of tests are required for each product and under what conditions foreign certifications may be accepted.
4.Clarification and consistency of wording:
Ambiguous or inconsistent expressions will be revised for clarity and consistency in legal interpretation.
Important Note: This announcement includes a comprehensive plan to revise the entire product certification numbering system.
Public Comment Period: Within 20 days from the date of the announcement.

China Taiwan 中国台湾

经济部标准检验局预告「应施检验电力转换系统商品之相关检验规定」修正草案 [法规草案] 经济部标准检验局预告「应施检验电力转换系统商品之相关检验规定」修正草案，自2026年7月1日生效。将检验范围从20 kW以下扩大至100 kW以下，分两阶段实施强制检验。第一阶段自2026年7月1日起，容量20 kW以下系统开始强制检验；第二阶段自2027年7月1日起，容量20-100 kW系统纳入检验范围。检验方式采用型式认可逐批检验或验证登录双轨制，证书有效期3年。

To achieve net-zero carbon emissions by 2050, it is expected that renewable energy power generation equipment and energy storage systems will gradually be installed not only at outdoor sites but also in indoor households and factories. Considering that the Power Conversion System (PCS) is a critical component of energy storage systems, the BSMI proposes to expand PCS not exceeding 100 kW in the mandatory inspection scope to ensure consumer safety. Two alternative conformity assessment procedures are made available for the choice of applicants, i.e. Registration of Product Certification (RPC) or Type-Approved Batch Inspection (TABI).
1 July 2026 – inspection scope: no more than 20 kW
1 July 2027 – inspection scope: over 20 kW and not exceeding 100 kW

China Taiwan 中国台湾

经济部标准检验局修正「玩具商品检验作业规定」 “经济部标准检验局修正「玩具商品检验作业规定」，自2025年8月1日生效，建立风险分级检验制度。
玩具商品依危害风险性分为两类：低危害风险玩具采符合性声明，包括认知学习玩具、纸制美劳玩具、存钱筒、贴纸、拼图积木 (500片以下)、桌游、文具玩具及填充玩偶等九大类；中危害风险玩具采监视查验或验证登录双轨制。

BSMI amended toy inspection regulations effective August 1, 2025, establishing risk-based inspection. Low-risk toys (educational toys, paper crafts, piggy banks, stickers, puzzles under 500 pieces, board games, stationery toys, stuffed dolls) use conformity declaration with “D” marking, while medium-risk toys require surveillance inspection (“C”/”M” marking) or verification registration (“R” marking). This streamlines procedures for low-risk products while maintaining strict controls for high-risk items.