资讯 / 电信 ITE / Telecom

Brazil 巴西

巴西ANATEL就Wi-Fi 6e频段自动频率协调技术要求草案开展公众咨询

[法规草案] 2026年9月23日，巴西国家电信局 (ANATEL) 发布了第41号公众咨询，就Wi-Fi 6e频段自动频率协调 (AFC) 技术要求草案开征求公众意见。ANATEL的相关技术方案与FCC的技术方案大部分保持一致，但巴西仅开放5925 MHz – 6425 MHz频段，且ANATEL要求对接其官方数据库BDTA。

On September 23, 2026, Brazil’s National Telecommunications Authority (ANATEL) issued Public Consultation No. 41, soliciting public comments on the draft technical requirements for Automatic Frequency Coordination (AFC) in the Wi-Fi 6e band. ANATEL’s technical solutions are largely consistent with FCC technical proposals, but Brazil only opens the 5925 MHz – 6425 MHz band, and ANATEL requires integration with its official database BDTA.

Cambodia 柬埔寨

柬埔寨TRC对电信设备实施新的进口限制措施

2026年9月22日，柬埔寨电信监管局 (TRC) 发布正式公告，严禁进口、供应及分销假冒和二手电信设备，旨在遏制不合规设备的流入。TRC认为这些设备对公共安全、网络完整性及国家基础设施构成重大风险。主要内容如下：
– 禁止任何实体进口或销售假冒及二手电信硬件设备 (包括手机、路由器和网络设备等)，仅允许销售全新的授权产品；
– 所有设备必须持有由TRC颁发的有效型号核准证书。此外，相关实体必须保持有效的“合格代理商”资格，或在开展业务时获得进口许可证；
– 相关利益方须在公告发布之日起60天内使业务符合上述要求。违规行为可能导致设备被没收、面临罚款以及数字销售平台被关闭。

On September 22, 2026, the Cambodian Telecommunications Regulatory Authority (TRC) issued an official announcement strictly prohibiting the import, supply, and distribution of counterfeit and second-hand telecom equipment, aiming to curb the influx of non-compliant devices. TRC considers these devices to pose significant risks to public safety, network integrity, and national infrastructure. The main points are as follows:
– Prohibit any entity from importing or selling counterfeit and second-hand telecom hardware (including mobile phones, routers, and network equipment), and only permit the sale of brand-new authorized products;
– All equipment must hold a valid type approval certificate issued by the TRC. Additionally, the relevant entity must maintain a valid “”qualified agent”” qualification or obtain an import license when conducting business;
– Relevant stakeholders must comply with the above requirements within 60 days from the date of the announcement. Violations may result in device confiscation, fines, and the closure of digital sales platforms.

Honduras 洪都拉斯

洪都拉斯扩大 WLAN 免个别许可频段至 7125 MHz

2026 年 9 月 2 日，洪都拉斯国家电信委员会 (CONATEL) 发布并实施第 NR003/26 号决议，修订《国家频率分配计划》(PNAF)，将无线接入系统／无线局域网络 (WAS/RLAN) 的通用许可频段由原先的 5925–6425 MHz 扩大至 5925–7125 MHz，新增开放 6425–7125 MHz 频段供相关设备使用。
此修订扩大了 Wi-Fi 6E 及 Wi-Fi 7 设备在洪都拉斯的可用频谱范围。制造商及出口商应确认产品的频率支持范围，并确保设备符合 CONATEL 适用的技术要求及型式认可规定。

On September 2, 2026, Honduras’ National Telecommunications Commission (CONATEL) published and brought into force Resolution NR003/26, amending the National Frequency Allocation Plan (PNAF). The resolution expands the frequency range covered by the general license for Wireless Access Systems and Radio Local Area Networks (WAS/RLAN) from 5925–6425 MHz to 5925–7125 MHz, making the additional 6425–7125 MHz segment available for relevant devices.
This amendment broadens the available spectrum for Wi-Fi 6E and Wi-Fi 7 equipment in Honduras. Manufacturers and exporters should verify their products’ supported frequency ranges and ensure compliance with applicable CONATEL technical requirements and type approval regulations.

India 印度

印度延后 Standalone Hard Disk Drives 强制 BIS 注册期限至 2027 年 5 月 1 日

2026 年 10 月 16 日，印度电子信息科技部 (MeitY) 发布通知 S.O. 5689(E)，宣布延后独立式硬盘 (Standalone Hard Disk Drives) 纳入《电子与信息科技产品强制注册令》(CRO 2021) 的实施期限。
原定于 2026 年 11 月 5 日生效的要求，现延后至 2027 年 5 月 1 日。相关产品仍须符合印度标准 IS 13252 (Part 1):2010，并依 BIS 强制注册制度 (CRS) 办理适用的符合性评估及注册要求。
本次延期适用于新增纳入规范的非 USB Type 外接硬盘产品；既有 USB Type External Hard Disk Drives 仍依原有规定管理。制造商及进口商应依修订后的时程安排产品测试与 BIS 注册作业。

On October 16, 2026, India’s Ministry of Electronics and Information Technology (MeitY) issued Notification S.O. 5689(E), extending the implementation timeline for Standalone Hard Disk Drives under the Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order, 2021 (CRO 2021).
The requirement, originally scheduled to take effect on November 5, 2026, has been postponed to May 1, 2027. The applicable products remain subject to Indian Standard IS 13252 (Part 1):2010 and the relevant conformity assessment and registration requirements under the BIS Compulsory Registration Scheme (CRS).
The extension applies to newly covered standalone hard disk drives other than USB Type External Hard Disk Drives, which remain governed by the existing provisions. Manufacturers and importers should adjust their product testing and BIS registration plans according to the revised timeline.

Japan 日本

日本MIC将于2027年4月起对IP终端设备实施软件更新及接口安全要求

2026年9月24日，日本总务省 (MIC) 发布第346号通告，修订了《终端设备规则》 (1985年第31号省令)，针对部分可通过网络远程更改通信设置的IP电信终端设备，增设了相关安全要求，包括初始密码、软件安全更新机制、接口与非必要端口管理等要求。自2027年4月1日起，相关设备必须具备针对通信功能的软件更新机制，并针对设备接口采取特定的安全措施 (或实施同等效力的措施)。

On September 24, 2026, Japan’s Ministry of Internal Affairs and Communications (MIC) issued Notification No. 346, revising the “Terminal Equipment Regulations” (Ministerial Ordinance No. 31 of 1985). For certain IP telecom terminal devices that can remotely change communication settings over the network, relevant security requirements were added, including initial passwords, software security update mechanisms, interface and non-essential port management, and other requirements. Starting April 1, 2027, relevant devices must have software update mechanisms for communication functions and implement specific security measures (or equivalent measures) for device interfaces.

Japan 日本

日本MIC发布700 MHz频段NGSO移动卫星通信技术要求

2026年10月1日，日本总务省 (MIC) 发布第363号通告，修订了《电波法》下的相关部令，为支持移动通信的非静止轨道 (NGSO) 卫星通信系统确立了技术要求。该修订已于发布之日起正式生效。该修订针对不同子频段设定了相应的带宽限制和运行条件，其中包括针对在715–718 MHz频段内运行的设备所制定的相关规定。

On October 1, 2026, Japan’s Ministry of Internal Affairs and Communications (MIC) issued Notification No. 363, revising relevant ministerial orders under the Radio Law to establish technical requirements for non-geostationary orbit (NGSO) satellite communication systems supporting mobile communications. This revision has officially taken effect since its issuance. The amendment sets corresponding bandwidth limits and operating conditions for different sub-bands, including regulations for devices operating in the 715–718 MHz frequency band.

Malaysia 马来西亚

马来西亚SIRIM自2026年11月5日开始实施通信设备EMC抗扰度要求

2026年10月13日，马来西亚标准与工业研究院 (SIRIM) 发布公告SQASI/CMCS/1/26/011，通报MCMC MTSFB TC T022:2026《通信设备基础要求》技术规范中电磁兼容 (EMC) 相关规则，EMC发射与抗扰度全部要求将于2026年11月5日正式全面执行。
– 随着新规落地，EMC抗扰度项目新增评估收费。针对新的型号核准申请，EMC发射评估维持原有收费；若采用外部实验室出具的抗扰度测试报告，需额外缴纳评估费，使用SIRIM自有实验室报告则免收该附加费用；
– 对于已取得型号核准的存量产品，原有常规续证通道不再适用。企业必须提交对比并行申请 (PBC)，仅针对抗扰度项目完成合规评估，收费标准与新申请保持一致。提交报告缺少抗扰度相关数据的产品，需要补做对应测试。

On October 13, 2026, the Malaysian Institute of Standards and Industry (SIRIM) issued announcement SQASI/CMCS/1/26/011, notifying that the technical specifications for MCMC MTSFB TC T022:2026 “”Basic Requirements for Communication Equipment”” include electromagnetic compatibility (EMC) rules, and that all EMC emission and immunity requirements will be fully implemented on November 5, 2026.
– With the implementation of the new regulations, an assessment fee for EMC immunity has been added. For new model approval applications, EMC emission assessment remains at the original 300 MYR; If using an external lab-issued immunity test report, an additional 500 MYR assessment fee must be paid; using SIRIM’s own laboratory report is exempt from this additional fee;
– For existing products that have already obtained model approval, the original regular renewal channel is no longer applicable. Enterprises must submit a Parallel Comparison Application (PBC), completing compliance assessment only for the immunity item, with the fee standard consistent with the new application. Products lacking relevant data on immunity must undergo corresponding testing.

Malaysia 马来西亚

马来西亚MCMC更新三项通信设备认证技术规范对应认证要求

2026年10月2日，马来西亚标准与工业研究院 (SIRIM) 发布公告SQASI/CMCS/1/26/010，通报了2026年8月4日批准并发布三项通信及混合设备认证技术规范的认证要求，包含4G终端 (MCMC MTSFB TC T015:2026，第2修订版)、4G基站 (MCMC MTSFB TC T023:2026)、航空无线电设备 (MCMC MTSFB TC T020:2026)。规范已在官网技术法规登记册公示。新规给予6个月过渡期，2027年2月4日起强制实施 (按2026年8月4日发布时间计算过渡期)。
– 过渡期内证书续期要求如下：4G终端及基站原有证书续期最长仅1年；2027年2月4日后不再支持续证，企业须提交比对并行 (PBC) 申请，结合MCMC MTSFB T022基础要求更新认证；航空无线电设备仍沿用原有续证流程；
– 新申请要求：过渡期内鼓励按新标准进行认证，按旧标准执行的新申请证书有效期为1年；对于基站设备，可采用仿真报告佐证MCMC MTSFB TC T023:2026互操作的合规。

On October 2, 2026, the Institute of Standards and Industry Malaysia (SIRIM) issued announcement SQASI/CMCS/1/26/010, outlining the certification requirements for three technical specifications for communication and hybrid equipment approved and released on August 4, 2026: 4G terminals (MCMC MTSFB TC T015:2026, 2nd revision), 4G base stations (MCMC MTSFB TC T023:2026), and aviation radio equipment (MCMC MTSFB TC T020:2026). The specifications have been published in the technical regulations register on the official website. The new regulations provide a 6-month transition period, with mandatory implementation starting February 4, 2027 (the transition period is calculated based on the release date of August 4, 2026).
– Certificate renewal requirements during the transition period are as follows: 4G terminal and base station original certificates can be renewed for up to one year; After February 4, 2027, renewal will no longer be supported; enterprises must submit a Parallel Comparison (PBC) application to update certification in conjunction with the MCMC MTSFB T022 basic requirements; Aviation radio equipment will continue to use the original renewal process;
– New application requirements: During the transition period, certification under the new standard is encouraged; the new application certificate under the old standard is valid for 1 year; For base station equipment, simulation reports can be used to verify compliance with MCMC MTSFB TC T023:2026 network interoperability.

Malaysia 马来西亚

马来西亚MCMC发布互联网协议第6版 (IPv6) 第二次修订版草案

[法规草案] 马来西亚通讯与多媒体委员会 (MCMC) 发布了《技术规范 – 互联网协议第6版 (IPv6) – 设备合规性 (第二次修订版)》草案，现公开征求意见，截止日期为2026年11月7日。 Malaysia MCMC published the draft of Technical Code – ​Internet Protocol version 6 (IPv6) – Equipment Compliance (Second Revision)​, for collecting comments until November 7, 2026.
Mexico 墨西哥 墨西哥经济部更新移动通讯设备海关查验规定 “2026年9月28日，墨西哥经济部更新外贸规则 (附录2.4.1)，强制部分HS代码的电信与移动设备进口须于边境通关时验证符合NOM-221-SCFI-2017及NOM-221/2-SCFI-2018标准，相关HS代码及标准对应如下：
– NOM-221-SCFI-2017 (IMEI识别码)：8517.18.99；
– NOM-221/2-SCFI-2018 (频谱技术规范，700-2500MHz)：8517.13.01、8517.14.91、8517.18.99、8517.62.17、8517.69.99。

On September 28, 2026, Mexico’s Ministry of Economy updated its foreign trade rules (Appendix 2.4.1), mandating that certain HS codes for telecommunications and mobile device imports must verify compliance with NOM-221-SCFI-2017 and NOM-221/2-SCFI-2018 standards at the border. The corresponding HS codes and standards are as follows:
– NOM-221-SCFI-2017 (IMEI identification code): 8517.18.99;
– NOM-221/2-SCFI-2018 (Spectrum Technical Specification, 700-2500MHz): 8517.13.01, 8517.14.91, 8517.18.99, 8517.62.17, 8517.69.99.

Nigeria 尼日利亚

尼日利亚NCC加强对具备SIM卡功能的设备进行型号核准合规管理

2026年9月9日，尼日利亚通信委员会 (NCC) 发布新闻稿，宣布针对具备SIM卡功能的设备建立一套自动化的型号核准合规框架，该框架由“设备管理系统” (DMS) 平台提供支持。该系统包含一个“中央设备身份登记库”(CEIR)，用于记录尼日利亚境内具备SIM卡功能的通信设备信息，其中包括国际移动设备识别码 (IMEI) 等数据。所有具备SIM卡功能的通信设备在进入尼日利亚之前，均须进行注册。未经注册的设备将不被允许在尼日利亚的网络上运行。该框架的实施分为多个阶段，首阶段工作包括：将现有库存设备纳入系统管理，并对新进口的具备SIM卡功能的设备进行注册与认证。
对于已在尼日利亚境内的既有库存设备，NCC 将登录期限延长至 2026 年 10 月 6 日，并允许尚在办理必要许可程序的业者同步开始 IMEI 登录。
自 2026 年 10 月 7 日起，新的设备验证机制开始实施。未符合适用认证及验证要求的设备，可能受到尼日利亚行动通信网路的使用限制。相关制造商及进口商应确认设备型号认证、适用营业许可及 IMEI 登录均符合 NCC 规定。

On September 9, 2026, the Nigerian Communications Commission (NCC) issued a press release announcing the establishment of an automated model approval compliance framework for devices with SIM card functionality, supported by the Device Management System (DMS) platform. This system includes a “”Central Device Identity Registry”” (CEIR) to record information on SIM card-enabled communication devices within Nigeria, including data such as the International Mobile Device Identification Number (IMEI). All SIM card-enabled communication devices must be registered before entering Nigeria. Unregistered devices will not be allowed to operate on Nigeria’s networks. The implementation of this framework is divided into several phases. The first phase includes incorporating existing inventory devices into system management and registering and certifying newly imported SIM card-enabled devices.
For existing device stock already in Nigeria, the registration deadline was extended to October 6, 2026. The NCC also allowed businesses still completing the necessary licensing procedures to begin IMEI registration while their applications were being processed.
The enhanced device verification system took effect on October 7, 2026. Devices that fail to meet applicable approval and verification requirements may be restricted from accessing Nigerian mobile telecommunications networks. Manufacturers and importers should ensure that device model approvals, applicable business licences and IMEI registration requirements are fulfilled.

Serbia 塞尔维亚

塞尔维亚更新无线电设备法规，2027年起取消强制 CoC 证书

塞尔维亚电信主管机关 (RATEL) 颁布新版无线电设备法规 (Rulebook on Radio Equipment No. 24/2024)，对标欧盟无线设备指令 (RED 2014/53/EU)。主要法规变更如下:
– CoC 证书过渡期: 自2027年1月1日起，无线电产品将全面取消强制申请塞尔维亚国家级 CoC (Certificate of Conformity) 证书，产品可直接标注 CE Mark 通关与销售。2026年12月31日前，塞尔维亚 CoC 仍为强制性要求。
– 出具塞尔维亚语 DoC: 自2027年起，制造商不能直接使用通用欧盟英文版 CE DoC，而必须依据法规附录 (Annex V) 出具塞尔维亚语版本的符合性声明 (Serbian DoC)，内容需引用塞尔维亚本国 Rulebook 与相对应之标准。

The Regulatory Authority for Electronic Communications and Postal Services of Serbia (RATEL) has implemented the new Rulebook on Radio Equipment (Official Gazette of RS, No. 24/2024), aligning national requirements with the EU Radio Equipment Directive (RED 2014/53/EU). Key regulatory updates include:
– Certificate of Conformity (CoC) Transition: Effective January 1, 2027, the mandatory requirement for national Serbian CoC certification for radio equipment will be officially removed. CE marking will be directly accepted for market access. The national CoC regime remains mandatory through December 31, 2026.
– Serbian Language DoC Requirement: From 2027 onward, standard English EU CE DoCs cannot be used directly. Manufacturers must issue a Declaration of Conformity (DoC) in the Serbian language following the format prescribed in Annex V, explicitly referencing the national Rulebook and applicable standards.

South Korea 韩国

韩国 RRA 提议修订终端设备技术标准，拟调整 IP 摄影机监管范围

韩国国家无线电研究院 (RRA) 于 2026 年 9 月 15 日发布第 2026-52 号公告，就《终端设备技术标准》(Technical Standards for Terminal Equipment) 部分修订草案征求公众意见。此次修订旨在调整 IP 摄影机的监管适用范围，并减轻业者重复测试的负担。
主要修订内容如下：
1) 修订术语定义： 调整「影像信息处理设备」（visual information processing device）的定义，参照韩国《个人信息保护法》对固定式影像信息处理设备的定义。
2) 调整 IP 摄影机适用范围： 拟新增例外条款，将无法透过影像信息识别特定个人的因特网协议 (IP) 影像信息处理设备排除于相关技术标准的适用范围之外。
3) 减少重复测试： 同步修订《广播通信设备符合性评估公告》(Notification on Conformity Assessment of Broadcasting and Communications Equipment)，以减少与信息安全相关认证重复的测试要求，降低业者的合规负担。
公众意见征询期间： 2026 年 9 月 15 日至 11 月 13 日。
本次修订仍处于草案阶段，最终适用范围及实施要求应以正式公布的修订内容为准。

On September 15, 2026, South Korea’s National Radio Research Agency (RRA) issued Notice No. 2026-52, proposing amendments to the Technical Standards for Terminal Equipment. The draft aims to refine the regulatory scope applicable to IP cameras and reduce the compliance burden associated with duplicate testing.
The proposed amendments include:
1) Revision of Definitions: Amend the definition of “visual information processing device” with reference to the definition of fixed video surveillance devices under South Korea’s Personal Information Protection Act.
2) Adjustment of IP Camera Scope: Introduce a proviso to exclude IP-based visual information processing devices from the relevant technical requirements where specific individuals cannot be identified through the video information.
3) Reduction of Duplicate Testing: Concurrently amend the Notification on Conformity Assessment of Broadcasting and Communications Equipment to alleviate duplicate testing requirements associated with information security certifications.
Public consultation period: September 15 to November 13, 2026.
The amendments remain at the draft stage. The final regulatory scope and implementation requirements will be subject to the officially adopted amendments.

Togo 多哥

多哥ARCEP发布新设备认证程序

2026年9月23日，多哥电子通信与邮政监管局 (ARCEP) 发布了第152/ARCEP/DG/26号决议，全面修订了现有的终端及无线电设备认证和安装人员资质认证框架。此次更新废除了2001年的旧版法规，并针对无线电及终端设备的制造商、进口商和分销商，引入了更为严格的合规要求。主要变化如下：
– 强制性认证：所有拟进入多哥市场的电子通信及无线电设备，均须通过正式的型号核准 (Type Approval)，以验证其是否符合射频 (RF)、比吸收率 (SAR) 及电磁兼容性 (EMC) 标准；
– 标签要求：获准设备必须加贴不可去除的标签，标明具体的批准编号、日期及ARCEP标识。但该要求目前暂不执行，后续将适时发布进一步指导意见；
– 安装人员资质认证：新规要求，凡从事无线电设备安装、维护或调试的机构，必须事先获得ARCEP的资质认证；
– 样品要求：申请认证时需提供功能性样品，该样品将由ARCEP永久保留，以供后续监管程序使用。

On September 23, 2026, the Electronic Communications and Postal Regulatory Authority (ARCEP) of Togo issued Resolution 152/ARCEP/DG/26, comprehensively revising the existing framework for terminal and radio equipment certification and installer qualification certification. This update repealed the old 2001 regulations and introduced stricter compliance requirements for manufacturers, importers, and distributors of radio and terminal equipment. The main changes are as follows:
– Mandatory certification: All electronic communication and radio equipment intended to enter the Togo market must undergo formal Type Approval to verify compliance with RF, specific absorption rate (SAR), and electromagnetic compatibility (EMC) standards;
– Labeling requirements: Approved devices must bear a non-removable label indicating the specific approval number, date, and ARCEP mark. However, this requirement is not currently being enforced; further guidance will be issued in due course;
– Installation personnel qualification certification: The new regulations require that any organization engaged in radio equipment installation, maintenance, or commissioning must first obtain ARCEP qualification certification;
– Sample requirements: Functional samples must be provided when applying for certification, which will be permanently retained by ARCEP for subsequent regulatory purposes.

Turkey 土耳其

土耳其于Ecodesign legislation公布外部电源的新法规

土耳其Ecodesign legislation公布了外部电源的新法规。该土耳其公报与欧盟委员会第2025/2052号条例保持一致，包括其适用范围、效率限值、USB-C互操作性要求、通用充电器标志、线缆标识、浪涌测试、技术文件以及市场监督容差。该公报包含重要的本地实施要素，包括：
• 土耳其法律及主管部门参考信息
• 土耳其市场监督程序
• 产品信息中的MERSİS编号
• 明确规定的土耳其备件包装及网站声明
• 土耳其特有的合规与过渡性条款
重要日期:
• 第1条、第9条、第10条以及临时第1条第3款于2026年10月16日生效。
• 2028年12月14日：新要求全面适用
• 2030年12月14日：带USB-PD端口且额定输出功率超过100 W的外置电源的有限旧版能效过渡期结束
• 2033年12月14日：有条件备件过渡期结束
• 2028年12月14日前投放市场的产品可自愿提前符合新要求，并将被视为符合即将废止的要求。
• 截至2030年12月14日，配备USB-PD端口且铭牌标称输出功率高于100 W的外置电源，可继续适用先前土耳其公告SGM-2020/5中的能效要求。 此过渡期仅适用于能效要求，并不推迟SGM-2026/7中其他适用要求的实施。

Turkey has announced new regulations for external power supplies under its Ecodesign legislation. The Turkish Communique is aligned with Commission Regulation (EU) 2025/2052, including its scope, efficiency limits, USB-C interoperability requirements, Common Charger logo, cable markings, surge testing, technical documentation, and market-surveillance tolerances.
The communique contains important local implementation elements, including:
•Turkish legal and authority references
•Turkish market-surveillance procedures
•The MERSİS number in the product information
•The expressly prescribed Turkish spare-part packaging and website statement
•Türkiye specific compliance and transition provisions
Key dates:
•Articles 1, 9, 10, and Provisional Article 1(3) entered into force on 16 October 2026.
•14 December 2028: General application of the new requirements
•14 December 2030: End of the limited legacy-efficiency transition for external power supplies with USB-PD ports and rated output power above 100 W
•14 December 2033: End of the conditional spare-part transition
•Products placed on the market before 14 December 2028 may voluntarily comply early with the new requirements and will be deemed compliant with the outgoing requirements.
•Until 14 December 2030, external power supplies with a USB-PD port and nameplate output power above 100 W may continue to apply the energy-efficiency requirements of the previous Turkish Communique SGM-2020/5 instead of the new efficiency requirements in Annex II, Section 1. This transition applies only to energy efficiency and does not defer the other applicable requirements of SGM-2026/7.

家用电器 House Appliances

Argentina 阿根廷

阿根廷更新空调产品最低能效准入要求

阿根廷能源秘书处于2026年9月16日发布Resolución 242/2026，将制冷量不超过10.5 kW的空调最低季节能效指数 (IEEE) 门坎由原本的5.60提升至> 8.50 (相当于IRAM 62406:2019最高能效A级)，全面推动变频 (Inverter) 技术普及。
工业、商业与中小企业秘书处随后于2026年10月9日发布Resolución 408/2026，规定分阶段实施日历：
– 进口整机 (CBU): 2026年12月31日起适用第一阶段要求；2027年3月31日起全面执行IEEE > 8.50。
– 散件本地组装 (CKD): 2028年12月31日起先执行制热相关要求；2030年12月31日起全面执行制冷+制热完整标准。
决议公布前已采购之进口整机可获豁免。新规仅针对新上市产品，已安装之旧设备不受影响。

On September 16, 2026, the Secretariat of Energy issued Resolución 242/2026, raising the minimum Seasonal Energy Efficiency Index (IEEE) for air conditioners up to 10.5 kW from > 5.60 to > 8.50 (corresponding to Class A under IRAM 62406:2019) to accelerate inverter technology adoption.
On October 9, 2026, the Secretariat of Industry, Commerce and SMEs issued Resolución 408/2026, establishing the phased implementation timeline:
– Completely Built-Up (CBU) Imports: Phase 1 applies from December 31, 2026; full compliance with IEEE > 8.50 is required by March 31, 2027.
– Completely Knocked-Down (CKD) Local Assembly: Heating-related requirements apply from December 31, 2028; full compliance for both cooling and heating modes is required by December 31, 2030.
CBU units purchased prior to the publication of the resolution are exempt. The regulation applies solely to newly market-entered products; existing installations remain unaffected.

Brazil 巴西

巴西 INMETRO 提议整合脱水机符合性评估要求

巴西INMETRO于 2026 年 9 月 11 日发布第 15/2026 号公众咨询，提议修订第 148/2022 号法令，并废止第 144/2021 号法令，将脱水机 (Spin Dryers) 纳入家用及类似电器的整合式符合性评估要求，以统一相关产品的监管架构。
根据草案，既有证书无须立即重新启动认证程序，但须于下次维护阶段或新法规生效后 24 个月内 (以较晚者为准) 转换至新的整合式要求。第 144/2021 号法令则预计于新法规生效后 24 个月内废止。
公众咨询期间： 2026 年 9 月 11 日至 11 月 10 日。
注意： 本次变更仍处于草案咨询阶段，最终要求及实施安排仍以正式发布的法规为准。

On September 11, 2026, Brazil’s National Institute of Metrology, Quality and Technology (INMETRO) launched Public Consultation No. 15/2026, proposing amendments to Ordinance No. 148/2022 and the revocation of Ordinance No. 144/2021. The proposal aims to incorporate spin dryers into the consolidated conformity assessment framework for household and similar electrical appliances, streamlining the regulatory requirements applicable to these products.
Under the draft, existing certificates would not require an immediate new certification process. Instead, they would need to transition to the consolidated requirements at the next maintenance stage or within 24 months from the effective date of the new regulation, whichever is later. Ordinance No. 144/2021 would be revoked within 24 months from the effective date of the new regulation.
Public consultation period: September 11 to November 10, 2026.
Note: The proposal remains under public consultation. The final requirements and implementation arrangements will be subject to the officially published regulation.

Chile 智利

智利发布空气净化器安全测试草案协议 PE No. 1/45:2026

[法规草案] 2026年9月25日，智利电力与燃料监管局 (SEC) 向世界贸易组织 (WTO) 通报了一份关于电气产品分析/安全测试的草案协议——PE No. 1/45:2026：空气净化器。
该协议规定了家用及类似用途空气净化器 (电动空气清洁设备) 的安全认证程序要求。这些设备由不超过250伏的单相交流电源供电，同时也涵盖直流 (DC) 设备及电池供电设备。

On September 25, 2026, the Chile Superintendence of Electricity and Fuels (SEC) notified WTO regarding a draft protocol for analysis/safety testing of Electrical Products PE No. 1/45:2026: Air Purifier.
This protocol establishes the requirements for the safety certification procedure for air purifiers (electrical air-cleaning appliances) intended for household and similar use, powered by a single-phase AC supply not exceeding 250 V, including direct current (DC) appliances and battery-operated appliances.

Costa Rica 哥斯达黎加

哥斯达黎加认可墨西哥空调能效标准的等效性，适用于指定产品

哥斯达黎加已认可墨西哥标准 NOM-023-ENER-2018《分体式、自由送风、无风管空调的能源效率：限值、测试方法及标签》与中美洲技术法规 RTCA 23.01.80:21 的等效性。
此项认可仅适用于证书编号 ANC2501C00014407 所载的数值，以及 EQ 53-2026 号意见书附件 A 所列的设备，不代表所有符合 NOM-023-ENER-2018 的空调均可自动适用等效认可。
相关业者应确认产品是否列于指定附件范围内，并持续遵守哥斯达黎加适用的能效要求及其他相关法规义务。

Costa Rica has recognized the equivalence of Mexican standard NOM-023-ENER-2018, Energy Efficiency in Split-Type, Free-Delivery, Non-Ducted Air Conditioners: Limits, Test Methods and Labelling, with Central American Technical Regulation RTCA 23.01.80:21.
This recognition is limited to the values contained in certificate ANC2501C00014407 and the equipment listed in Annex A to Opinion EQ 53-2026. It does not constitute blanket recognition of NOM-023-ENER-2018 for all air conditioners.
Relevant manufacturers and importers should verify whether their products fall within the specified scope and continue to comply with all other applicable energy efficiency and regulatory requirements in Costa Rica.

Costa Rica 哥斯达黎加

哥斯达黎加认可 AHRI 空调能效标准等效性，适用于指定变频分体式空调

哥斯达黎加环境与能源部 (MINAE) 能源局于 2026 年 9 月 22 日发布第 0032-2026-DE 号决议，认可 AHRI Standard 210/240-2024《整体式空调及空气源热泵设备性能评级》与中美洲技术法规 RTCA 23.01.78:20《变频分体式、可变冷媒流量、自由送风及无风管空调的能效规格》具有等效性。
本次认可仅适用于 AHRI 证书编号 216021576 所列的性能数值，以及决议指定的设备，包括特定 Daikin 空调室外机型号。此认可不适用于所有符合 AHRI Standard 210/240-2024 的空调产品。
本次决议依据第 44037-MINAE 号行政法令、第 43616-COMEX-MEIC-MINAE 号行政法令，以及中美洲经济整合部长理事会 (COMIECO) 第 451-2021 号决议作成。相关认可的对外生效安排，应依哥斯达黎加官方公报公告确认。

On September 22, 2026, the Energy Directorate of Costa Rica’s Ministry of Environment and Energy (MINAE) issued Resolution No. 0032-2026-DE, recognizing the equivalence of AHRI Standard 210/240-2024, Performance Rating of Unitary Air-Conditioning & Air-Source Heat Pump Equipment, with Central American Technical Regulation RTCA 23.01.78:20, which establishes energy efficiency requirements for inverter split-type, variable-refrigerant-flow, free-discharge, ductless air conditioners.
The recognition is limited to the performance values specified in AHRI Certificate No. 216021576 and the equipment identified in the resolution, including a specified Daikin outdoor unit model. It does not constitute blanket recognition of AHRI Standard 210/240-2024 for all air conditioners.
The decision is based on Executive Decree No. 44037-MINAE, Executive Decree No. 43616-COMEX-MEIC-MINAE, and COMIECO Resolution No. 451-2021. The effective date of the recognition for public application should be confirmed against the relevant publication in Costa Rica’s official gazette.

Malaysia 马来西亚

马来西亚新增电动马达及冷热饮水机能效管制，2027 年 1 月起生效

2026 年 8 月 6 日，马来西亚能源委员会 (Energy Commission，Suruhanjaya Tenaga，ST) 发布《能耗产品指南》第 1 次修订版 (GP/ST/No.50/2024（Pind.1/2026)，将电动马达及冷热饮水机新增纳入受管制能耗产品范围，并订定相关最低能源效能标准 (MEPS) 及能源标示要求。
新增产品的适用范围及主要要求如下：
– 电动马达: 适用于额定功率 0.75 kW 至 1,000 kW 的三相、单速、鼠笼式感应电动机，须符合 IEC 60034 系列标准及 IE3 能效等级要求。
– 冷热饮水机: 涵盖家用储水式及即热式机型，须依 MS 2799:2024 进行能效测试及评级。
两类新增产品的相关要求均自 2027 年 1 月 1 日起生效。制造商及进口商应提前确认产品适用范围、测试标准、最低能效等级及能源标示要求，以确保符合马来西亚市场准入规定。

On August 6, 2026, Malaysia’s Energy Commission (Suruhanjaya Tenaga, ST) issued the first revision of the Guidelines on Energy-Using Product (GP/ST/No.50/2024 (Pind.1/2026)). The revision adds electric motors and hot and cold water dispensers to the scope of regulated energy-using products and introduces applicable Minimum Energy Performance Standards (MEPS) and energy labelling requirements.
The scope and key requirements for the newly regulated products are as follows:
– Electric Motors: Applies to three-phase, single-speed, squirrel-cage induction motors rated from 0.75 kW to 1,000 kW. Motors must comply with the applicable IEC 60034 series standards and meet the IE3 energy efficiency level.
– Hot and Cold Water Dispensers: Covers domestic storage-type and instant-type water dispensers, subject to energy efficiency testing and rating in accordance with MS 2799:2024.
The new requirements for both product categories will take effect on January 1, 2027. Manufacturers and importers should review the applicable product scope, testing standards, minimum efficiency levels and energy labelling requirements in advance to ensure compliance with Malaysian market access regulations.

Serbia 塞尔维亚

塞尔维亚发布干衣机生态设计条例

2026年7月23日，矿业和能源部 (MoME) 发布了《家用滚筒烘干机生态设计要求条例》(塞尔维亚共和国官方公报第67/2026-131号)，以确立家用滚筒烘干机的生态设计、能效、合规评估、信息披露和市场监管要求。该条例于2026年7月31日生效，并自2027年9月1日起实施。

On July 23, 2026, the Ministry of Mining and Energy (MoME) issued the Regulation on Eco-Design Requirements for Household Tumble Dryers (Official Gazette of the Republic of Serbia No. 67/2026-131) to establish eco-design, energy efficiency, conformity assessment, information disclosure and market surveillance requirements for household tumble dryers. The regulation entered into force on July 31, 2026, and will apply from Sept. 1, 2027.

Singapore 新加坡

新加坡环境局计划扩充能源标签计划产品及拟议更新能源标签

新加坡国家环境局 (NEA) 于2026年10月21日发布公众咨询，拟将电风扇、洗碗机和洗衣机纳入强制性能源标签计划 (MELS) 和最低能源性能标准 (MEPS) 管制范围。意见反馈截止日期为2026年11月9日。

The National Environment Agency (NEA) of Singapore is seeking feedback on the following proposals:
a.revamping the Mandatory Energy Labelling Scheme (MELS); and
b.introducing Minimum Energy Performance Standards (MEPS) and MELS for (1) household washing machines, (2) household fans, and (3) household dishwashers.
The consultation exercise will start on 21 Oct 2026 and end on 9 Nov 2026.

灯具 / LED Luminaiaries/LED

Kuwait 科威特

科威特照明能效要求延期至2026年12月31号，系统新增豁免申请

科威特于2026年8月17日针对照明产品实施了两项能效标准：
• KWS 1902-1:2024 —— 照明产品的能效、功能及标签要求 —— 第1部分
• KWS 1902-2:2024 —— 照明产品的能效、功能及标签要求 —— 第2部分
上述标准涵盖的所有照明产品，均须按照相关监管要求，在科威特工业管理局 (PAI) 的系统中进行注册，为每个产品型号获取专属能效标签，并将该标签印制在产品包装上。
目前，能效注册的强制执行日期已进行调整并延长至2026年12月31日。
PAI 注册系统已新增豁免产品注册入口，符合豁免条件的产品，同样需要提交注册、申领能效豁免证书，并在产品包装上加贴豁免二维码。

On August 17, 2026, Kuwait brought into effect two energy efficiency standards for lighting products:
• KWS 1902-1:2024 ─ Energy Efficiency, Functionality and Labeling Requirements for Lighting Products – Part 1
• KWS 1902-2:2024 ─ Energy Efficiency, Functionality and Labeling Requirements for Lighting Products – Part 2
All lighting products covered by the above standards must, in accordance with the relevant regulatory requirements, be registered in the system of the Kuwait Public Authority for Industry (PAI), obtain a dedicated energy efficiency label for each product model, and have the label printed on the product packaging.
The official mandatory effective date for energy efficiency registration has now been updated and extended to December 31, 2026.
An exemption registration entry has been added to the PAI registration system. Products meeting the exemption criteria are also required to complete registration, apply for an energy efficiency exemption certificate, and affix the exemption QR code on the packaging.

能源效率要求 Energy Efficiency Requirements

South Korea 韩国

韩国MEPS效率管理设备各产品适用标准施行日期相关说明

韩国能源署 (KEA) 发布MEPS各项强制产品适用标准施行日期，于制作能效标签时参考。(截至 2026 年 11 月 1 日)。
注意: 自 2026 年 11 月 1 日起，「多联式电热泵系统」将调整归类为「电冷气机 (多联式)」及「电冷暖气机 (多联式)」。
此调整适用于 2026 年 11 月 1 日起制造的产品。

The Korea Energy Agency (KEA) has published the effective dates of the applicable standards for each product category subject to mandatory MEPS requirements, as detailed in the attachment. Please refer to this information when preparing energy efficiency labels. (As of November 1, 2026.)
Please note: Effective November 1, 2026, “multi-split electric heat pump systems” will be reclassified as “electric air conditioners (multi-split type)” and “electric heating and cooling air conditioners (multi-split type).
This change applies to products manufactured on or after November 1, 2026.

Ukraine 乌克兰

乌克兰发布外接电源生态设计新技术法规

2026 年 9 月 30 日，乌克兰内阁通过第 1207 号决议 (Resolution No. 1207)，批准新版《外接电源生态设计要求技术法规》，并于 2026 年 10 月 7 日公布。新规将于 2027 年 4 月 7 日生效，届时取代现行第 150 号决议 (Resolution No. 150)。
新法规以欧盟 Regulation (EU) 2019/1782 为基础，取代原先参照的 Regulation (EC) No 278/2009，进一步与欧盟外接电源生态设计要求接轨。
新规生效后，相关外接电源须符合新版技术法规。制造商及进口商应提前检视现有测试报告、技术文件及乌克兰符合性声明 (DoC)，确认是否需要补充测试或更新文件，以确保产品符合新规要求。

On September 30, 2026, the Cabinet of Ministers of Ukraine adopted Resolution No. 1207, approving a new Technical Regulation on Ecodesign Requirements for External Power Supplies. The resolution was published on October 7, 2026, and will enter into force on April 7, 2027, replacing the existing Resolution No. 150.
The new regulation is based on EU Regulation (EU) 2019/1782, replacing the previously referenced Regulation (EC) No. 278/2009, and further aligning Ukraine’s ecodesign requirements for external power supplies with the EU regulatory framework.
Upon the new regulation’s entry into force, applicable external power supplies must comply with the revised technical requirements. Manufacturers and importers should review their existing test reports, technical documentation, and Ukrainian Declarations of Conformity (DoCs) in advance to determine whether additional testing or document updates are necessary to ensure compliance.

RoHS/REACH

Ukraine 乌克兰

乌克兰修订 RoHS 技术法规之有害物质豁免条款

乌克兰内阁于 2026 年 9 月 17 日批准第 1153 号决议 (Resolution No. 1153)，对现行《电子电器设备有害物质限制 (RoHS) 技术法规》进行修订，并自 2026 年 9 月 19 日 公告当日起正式生效。本次修法并非变更基本管控范畴，而是同步欧盟最新 RoHS 授权指令，对特定产品与用途之有害物质 (特别是铅与水银) 豁免条款 (Exemptions) 进行更新与延长。此举旨在维持乌克兰技术规范与欧盟 EU RoHS 指令 (2011/65/EU) 的一致性。 制造商应确认现有产品所采用的 RoHS 豁免条款 (如焊料、金属合金、光学组件等) 是否符合最新修正之到期日与适用条件，以确保持续符合乌克兰市场准入规范。

On September 17, 2026, the Cabinet of Ministers of Ukraine adopted Resolution No. 1153, amending the national Technical Regulation on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Ukraine RoHS). The resolution was published and officially entered into force on September 19, 2026. Rather than altering the core scope of the regulation, this amendment revises and extends specific hazardous substance exemptions—particularly regarding lead (Pb) and mercury (Hg)—to align national law with recent EU RoHS Delegated Directives. This update maintains regulatory harmonization between Ukraine and EU Directive 2011/65/EU. Manufacturers supplying the Ukrainian market should review their current supply chain exemptions (such as solders, alloys, and optical glass) against the updated expiration dates and conditions.

其他 / 多主题产品 Others / Products with Multiple Subjects

China 中国

中国发布关于《自带动力系统的飞行玩具安全技术要求》新国家标准草案

[法规草案] 中国工业和信息化部发布了关于《自带动力系统的飞行玩具安全技术要求》新国家标准 (GB) 的征求意见稿。
意见征集截止日期为2026年11月12日。

China MIIT published consultation on the new GB standard on Safety technical requirements for flying toys with self-contained power system.
Comments-collect until 2026-11-12.

India 印度

印度提出《商用压力锅质量管制令》草案

[法规草案] 印度工业和国内贸易促进部 (DPIIT) 提出《商用压力锅质量管制令》 (Commercial Pressure Cooker (Quality Control) Order) 草案，拟要求商用压力锅符合印度标准 IS 17870:2022《商用压力锅—规范》，并依据 BIS《符合性评估条例》2018 的 Scheme I 取得印度标准局 (BIS) 认证及 ISI 标志。
草案拟定的实施过渡期如下，均自相关命令于印度官方电子公报 (e-Gazette) 公布之日起计算：
– 一般企业 (General Enterprises): 6 个月
– 小型企业 (Small Enterprises): 9 个月
– 微型企业 (Micro Enterprises): 12 个月
草案另拟豁免在印度境内制造且仅供出口的产品。目前，该要求仍处于草案阶段，正式公布尔日期及最终实施安排尚待确认。相关制造商及出口商应持续关注后续法规进展，并提前评估 BIS 认证需求。

India’s Department for Promotion of Industry and Internal Trade (DPIIT) has proposed a draft Commercial Pressure Cooker (Quality Control) Order, which would require commercial pressure cookers to comply with IS 17870:2022 — Commercial Pressure Cooker — Specification and obtain certification from the Bureau of Indian Standards (BIS) under Scheme I of the BIS (Conformity Assessment) Regulations, 2018, with the BIS Standard Mark (ISI Mark).
The proposed transition periods, calculated from the date of publication of the Order in the e-Gazette, are as follows:
– General Enterprises: 6 months
– Small Enterprises: 9 months
– Micro Enterprises: 12 months
The draft also proposes an exemption for products manufactured domestically in India exclusively for export. The proposal remains at the draft stage, and the final notification date and implementation arrangements are yet to be confirmed. Manufacturers and exporters should monitor further regulatory developments and assess their BIS certification requirements in advance.

Peru 秘鲁

秘鲁发布带过电流保护自动开关的技术法规草案

[法规草案] 秘鲁生产部 (PRODUCE) 发布了一份关于家用、商用及类似场所用带过电流保护自动开关的技术法规草案。
该技术法规草案规定了家用、商用及类似场所以低压带过电流保护自动开关在生产、进口和销售方面的技术、安全及标签要求。
该草案目前处于公众咨询阶段，征求意见截止日期为2026年11月16日。

Peru Ministry of Production (PRODUCE) has published a draft Technical Regulation on automatic switches with overcurrent protection for household, commercial, and similar installations.
The notified draft Technical Regulation establishes the technical, safety, and labelling requirements for the production, importation, and marketing of low-voltage automatic switches with overcurrent protection for household, commercial, and similar installations.
The draft is under public consultation till November 16, 2026.

China Taiwan 中国台湾

经济部标准检验局发布信息商品及视听音响产品检验规定修正

经济部标准检验局发布信息商品及视听音响产品检验规定修正草案,涵盖数字摄影机、数字相机、路由器、显示器、电视机等十一项商品。此次修正的核心在于依产品是否具备连网功能进行分类管理,具连网功能的产品需额外符合信息安全标准,并采用更严格的验证登录制度。修正案同时新增不具储存功能的数字摄影机、数字相机、隐蔽式摄影机及拼接式显示器纳入检验范围,并强化限用物质标示要求以符合环保规范。
*具连网功能产品的新检验标准自公告日起实施,修正前标准于2028年7月1日停止适用。
*新增列检商品自2028年7月1日起实施检验。
*已取得证书的业者需在2027年6月30日前完成换证。详情请参考附件
*实验室资安检测资质预计于2027年Q4完成，此为建置目标，并非已确认之评鉴时程。

By the Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs , To align with the international trend of mandating cybersecurity testing for information technology products, and in response to the increasing number of cybersecurity incidents involving IoT products being hacked both domestically and internationally in recent years, the BSMI plans to introduce additional cybersecurity testing requirements for network-connected security devices, as well as information and audiovisual IoT products. This initiative aims to enhance the cybersecurity resilience of critical IoT products in the domestic market, ensure product security, and safeguard consumer rights.