德国莱茵TÜV认证 TÜV Rheinland Accreditation

Kenya 肯尼亚

TÜV莱茵集团获肯尼亚标准局 (KEBS) 授权，可为肯尼亚市场签发合格证书 (CoC)

TÜV莱茵集团已获得肯尼亚标准局 (KEBS) 授权，可为肯尼亚市场签发合格证书 (CoC)。
所有进口至肯尼亚的货物，除属于豁免清单、限制清单或禁止清单外，均须在装运前在出口国进行强制性认证。
如有任何关于肯尼亚合格证书要求的问题，请随时联系TÜV莱茵集团。

TÜV Rheinland has been authorized by Kenya Bureau of Standards (KEBS) to issue Certificates of Conformity (CoCs) for the Kenyan market for a period of three years.
All imported goods destined to Kenya shall undergo mandatory certification in the country of export prior to shipment, unless they fall under any exempted list, restricted, or prohibited list.
Sould you have any quesitons to Kenya CoC requirement, please do not hesitate to contact TÜV Rheinland Group.

 

资讯 / 电信 ITE / Telecom

Algeria 阿尔及利亚

阿尔及利亚对型式批准程序进行更新

阿尔及利亚邮政和电子通信监管局 (ARPCE) 于2026年2月22日颁布了第26-97号法令，对型式批准程序进行了更新。主要变更包括：
•证书的有效期由3年变成5年
•推出新的在线申请提交平台
提交申请和寄送样品仍需通过一家阿尔及利亚当地公司办理。

The Autorité de Régulation de la Poste et des Communications Électroniques (ARPCE) in Algeria issued Decree No. 26-97 on February 22, 2026, which updates Type Approval procedures. The main changes include:
•Certificate validity has been extended from 3 years to 5 years.
•The launch of a new online platform for submitting applications
A local Algerian company is still required for application submission and delivery of samples.

 

Argentina 阿根廷

阿根廷发布对ENACOM认证框架的更新

2026年2月26日，阿根廷国家通讯管理局 (ENACOM) 发布第57/2026号决议，撤销了先前的主要决议729/1980，旨在建立一套全新的审批体系，以简化和现代化阿根廷的电信设备认证流程。
本次更新的关键点如下：
• 新版RAMATEL法规框架将于2026年9月1日生效。 在该日期之前，现行ENACOM审批流程仍保持原有效力。
• 根据第586/2023号决议，获批设备上市仍须强制标注RAMATEL监管标识。 在线销售时，卖方与电商平台均须在每件商品信息中清晰展示对应的RAMATEL识别码。
• 引入认证机构
设立本地第三方认证机构负责签发符合性证书。
该机构须经阿根廷认证机构OAA依据IRAM ISO/IEC 17065标准正式认可。
• 检测实验室需获得OAA认证
本地实验室须经阿根廷认证机构OAA依据IRAM ISO/IEC 17025标准正式认可。
现有ENACOM认可实验室享有2年过渡期以获取认证。
• ENACOM证书现接受家族型号认证
新规框架允许将家族型号纳入单份ENACOM认证证书。
• 电信设备商业化仍需强制获取ENACOM认证
认证的电信设备现分为A类 (消费类产品) 和B类 (专业用途)
• ENACOM认证证书将不再设有效期
但A类设备须每两年接受认证机构的监督审查。
B类设备无需接受监督流程
• 现有有效ENACOM证书的有效期将延长三年，至2029年2月26日。
此后必须根据新法规框架进行续期和重新认证。

On February 26th, 2026 the National Communications Entity (ENACOM) published Resolution 57/2026 to revoke the former main Resolution 729/1980, in order to establish a complete new approval scheme that aims to simplify and modernize Telecom Equipment Certification in Argentina.
The keypoints for these updates are as follows:
•The new RAMATEL regulation framework becomes effective on September 1st, 2026.
oUntil that date, the current ENACOM approval process still remains in force as it is.
•RAMATEL regulatory marking remains mandatory for the commercialization of approved devices based on Res. 586/2023.
oFor online sales, both sellers and marketplace platforms will now be required to clearly display the corresponding RAMATEL ID number in each product listing.
•Introduction of Certification Agencies
oThe incorporation of local third-party Certification Bodies to be responsible for issuing Certificates of Conformity.
oThey must be duly accredited by OAA (Argentinean Accreditation Body) under IRAM ISO/IEC 17065.
•Testing Laboratories now require OAA Accreditation
oLocal labs will need to be duly accredited by the OAA (Argentinean Accreditation Body) under IRAM ISO/IEC 17025.
oExisting ENACOM recognized laboratories have a grace period of 2 years to seek accreditation.
•Family Approval is now accepted on ENACOM Certificates
oThe new regulation frameworks accepts the concept of family models to be included on a single ENACOM Homologation Certificate
•ENACOM Approval remains mandatory for the commercialization of telecommunications devices
oTelecommunication devices subject to homologation are now classified as Class A (Consumer Products) and Class B (Professional Use)
•ENACOM Homologation Certificates will have no expiration date
oHowever, Class A devicesare subject to a surveillance process every 2 (two) years performed by Certification Agency.
oClass B devices will not require a surveillance process
•Existing ENACOM Certificates that are currently valid will have a their validity extended for 3 (three) additional years, until February 26th, 2029.
oAfter that date, they must be renewed and recertified in accordance with the new regulatory framework.

 

Bolivia 玻利维亚

玻利维亚再度更新需型式认证的电信产品清单

2026年3月，玻利维亚电信和运输监管与审计局 (ATT) 再度更新需型式认证的电信产品清单，更新后的电信设备认证清单于 2026 年 3 月起生效。该清单此前于 2026 年 2 月 25 日更新。在更新清单发布之日前提交的申请仍适用之前的清单要求。清单发布后提交的申请则必须符合新清单的要求。

The Autoridad de Regulación y Fiscalización de Telecomunicaciones y Transportes (ATT) in Bolivia announced the updated list of telecommunications equipment subject to homologation will come into effect starting March 2026.
The list was updated on February 25, 2026. Applications submitted up until to the date of publication of the updated list will follow the previous list requirements. Applications submitted after the publication of the updated list must conform to the new list.

 

Chile 智利

智利SUBTEL就启用600MHz频段进行IMT通信公开征求意见

[法规草案] 2026年3月10日，智利电信部 (SUBTEL) 就将600MHz频段用于IMT通信业务公开征求意见。意见征集截至2026年4月9日。

On March 10, 2026, the Chilean Subsecretaria de Telecomunicaciones (SUBTEL) publicly solicited opinions on the use of the 600MHz frequency band for IMT communication services. The final date to give comments is April 9, 2026.

Colombia 哥伦比亚

哥伦比亚更新国家频率分配表 (CNABF)

哥伦比亚国家频谱管理局 (ANE) 于 2026 年发布了第 000028 号决议，更新了国家频率分配表 (CNABF)，重点优化了 900 MHz 频段。此次修订允许该频段支持更广泛的无线电通讯服务，不再局限于先前预留用于国际行动通讯 (IMT) 的服务，从而改善偏远和脆弱地区的通讯连接。

The National Spectrum Agency (ANE) of Colombia has issued Resolution 000028 of 2026 to update the National Frequency Allocation Table (CNABF), specifically targeting the optimization of the 900 MHz band. This amendment allows the band to support a wider range of radiocommunication services beyond its previous reservation for International Mobile Telecommunications (IMT) to improve connectivity in remote and vulnerable areas.

Egypt 埃及

埃及NTRA发布型号核准程序的最新信息

埃及国家电信监管局 (NTRA) 发布了型号核准程序的最新信息。
所有型号核准方案 (轻型、中型和严格型方案) 的申请方式均已统一，本地和海外公司均需透过数字化型号核准入口网站进行申请。

The National Telecommunications Regulatory Authority (NTRA) of Egypt announced updates on Type Approval procedure.
All Type Approval Schemes (Light, Intermediate and Tight Schemes), the method to apply for Type Approval is unified to be through digital Type Approval portal for both Local and overseas companies.

China Hong Kong 中国香港

香港通讯事务管理局更新865-868 MHz及920-925 MHz频段设备的性能规范

香港通讯事务管理局 (OFCA)于2026年3月18日发布了以下性能规范:
• HKCA 1078 – 第2版 – 工作于920-925 MHz频段的无线电设备性能规范
• HKCA 1049 – 第2版 – 工作于865-868 MHz和/或920-925 MHz频段的射频识别 (RFID) 设备性能规范

Hong Kong OFCA Updates Specifications for Devices in the 865-868 MHz and 920-925 MHz Bands.
The Office of the Communications Authority (OFCA) in Hong Kong published the following Performance Specifications on March 18, 2026:
•HKCA 1078 – Issue 2 – Performance Specification for Radio Equipment operating in the 920-925 MHz Band
•HKCA 1049 – Issue 2 – Performance Specification for Radio Frequency Identification (RFID) Equipment Operating in the 865-868 MHz and/or 920-925 MHz Bands

 

India 印度

印度将 IS 18112:2022 (电视机) 的实施日期延至 2026 年 7 月 26 日

印度将 IS 18112:2022《卫星广播传输数字电视接收机—电视机规范》的实施日期延至 2026 年 7 月 26 日。

India postpones the implementation date for IS 18112:2022 Digital Television Receiver for Satellite Broadcast Transmission – Specification for Television Sets till Jul-26 of 2026.
India 印度 印度发布针对5G开放式无线存取网 (O-RAN) 的ITSAR要求) “印度发布了针对5G开放式无线存取网 (O-RAN) 的ITSAR (印度电信安全保障要求): RIC。
实施日期尚未确定。

India publishes ITSAR (Indian Telecom Security Assurance Requirements) for Open Radio Access Network (O-RAN) of 5G: RIC .
The implementation date is not determined yet.

India 印度

印度DoT发布已获证设备启用 5925-6425 MHz 频段的要求

印度电信部 (DoT) 此前于2026年1月20日发布了将5925-6425MHz频段用于免许可应用的公告。DoT注意到有部分产品此前在支持但禁用5925-6425MHz的前提下获得了证书。DoT于2026年3月6日再次发布通知，阐述了根据修订后的监管框架启用5925-6425MHz频段的合规要求。对于能够在5925-6425MHz 频段运行但仅获得2.4GHz和/或5GHz频段证书的产品的利益相关方，应重新申请新证书来启用5925-6425MHz频段。这些必要步骤须在2026年4月5日之前完成。除非获得新的证书授权，否则不得启用、激活或使用5925-6425 MHz频段。

The Ministry of Telecommunications (DoT) of India previously issued an announcement on January 20, 2026, to use the 5925-6425MHz frequency band for license-exempt applications. The DoT noted that some products had previously received certificates which supported but disabled 5925-6425MHz. The DoT issued another notice on March 6, 2026, setting out the compliance requirements for enabling the 5925-6425MHz band under the revised regulatory framework. Stakeholders of products capable of operating in the 5925-6425MHz band but only obtaining certificates for the 2.4GHz and/or 5GHz bands should reapply for a new certificate to enable the 5925-6425MHz band. These necessary steps must be completed by April 5, 2026. The 5925-6425 MHz band may not be enabled, activated, or used unless a new certificate authorization is obtained.

Indonesia 印度尼西亚

印度尼西亚发布关于行动通讯设备和平板计算机特定吸收率限制的草案

[法规草案] 通讯和数字部长公布了关于行动通讯设备和平板计算机特定吸收率限制的通讯和数字技术部长令草案。
该通讯和数字部长令草案将取代2024年第177号通讯和信息部长令，该法令同样涉及行动通讯设备和平板计算机的特定吸收率限制。

The Minister of Communication and Digital announced the Draft Decree of the Minister of Communication and Digital Technology concerning Specific Absorption Rate Limits on Mobile Telecommunications Devices and Tablet Computers.
The Draft Decree of the Minister of Communication and Digital concerning Specific Absorption Rate Limits on Mobile Telecommunication Devices and Tablet Computers will replace the Decree of the Minister of Communication and Informatics Number 177 of 2024 concerning Specific Absorption Rate Limits on Mobile Telecommunication Devices and Tablet Computers.

Malaysia 马来西亚

马来西亚MCMC提醒UWB设备禁止使用3300MHz~3400MHz频段

2026年2月11日，马来西亚通信及多媒体委员会 (MCMC) 发布公告：MCMC将取消《2025年第2版通信产品类别分配表》(Class Assignment No.2 of 2025) 中关于UWB设备附表中3300-3400MHz的频谱分配。而该分配表中已规定3400-3700Mz频段分配的有效期至2025年5月31日，因此自2026年4月1日起，UWB设备在马来西亚不可使用3300-3700MHz频段，可使用频段为3700-10600MHz。

On February 11, 2026, the Malaysian Communications and Multimedia Commission (MCMC) announced that MCMC will cancel the spectrum allocation of 3300-3400MHz in the Class Assignment No.2 of 2025 for UWB equipment. The allocation table has stipulated that the allocation of the 3400-3700Mz band will be valid until May 31, 2025, so from April 1, 2026, UWB equipment will not be able to use the 3300-3700MHz frequency band in Malaysia, and the frequency band can be used is 3700-10600MHz.

Nigeria 尼日利亚

尼日利亚发布《2026 年 6 GHz (5925 – 6425) MHz 频段低频段使用框架》和《2026 年 60GHz 频段多千兆无线网络使用指南》 尼日利亚发布《2026 年 6 GHz (5925 – 6425) MHz 频段低频段使用框架》和《2026 年 60GHz 频段多千兆无线网络使用指南》。

Nigeria publishes Framework for the use of the lower part of the 6 GHz (5925 – 6425) MHz band 2026 and Guidelines for the Use of the 60GHz Band for Multi Gigabit Wireless 2026.

Philippines 菲律宾

菲律宾拟发布移动电源和便携式电源组产品认证许可技术规定

[法规草案] 2026年2月27日，菲律宾DTI提交G/TBT/N/PHL/357号通报，计划发布移动电源和便携式电源组强制性产品认证技术规定草案。该草案旨在严格确保在菲律宾进口、制造、分销或销售的移动电源和便携式电源组符合规定的安全要求。
适用范围:
由直流电源供电，或通过直接插接结构由交流市电电源供电的移动电源及便携式电源装置；提供直流输出的移动电源；便携式电源装置，包括但不限于搭电线组件、插座、直流电连接器、车载适配器插座、USB连接器以及感应式电力发射器等
PS认证计划:
法规提到，PS安全认证标志许可计划 (PS Safety Certification Mark Licensing Scheme，简称为PS许可计划) 将面向在菲律宾市场销售或分销移动电源 (充电宝) 及便携式电源装置的本地和国外制造商/组装商开放。对于符合相关要求的公司，将授予PS许可标志。
持有有效PS许可证的本地公司：年度工厂审核+市场随机抽检。
持有有效PS许可证的外国公司：年度工厂审核+每批次货物到货检验。
进口商品清关 (ICC) 认证标志计划:
适用于未获PS认证的移动电源 (充电宝) 及便携式电源装置的进口商，仅对当次报关批次有效，需逐批申请。
注意事项:
每份PS许可证申请均须针对特定工厂、生产设施或场地提出。若申请人为境外制造商/组装商，必须由境外制造商/组装商在菲律宾合法注册的本地分支机构、代表处或代理机构提交申请。凡进口由外国制造商/组装商获得有效PS许可证所涵盖的充电宝和便携式电源设备的企业，均须根据每批货物、每份提单/航空货运单的情况申请确认声明(SOC)，以确保所进口的产品源自持有有效PS许可证的公司。
PS许可证自签发之日起生效，有效期为3年。

On 27 February 2026, Department of Trade and Industry of Bureau of Philippine Standards, published Draft Technical Regulation for the Mandatory Product Certification of Power Banks and Portable Power Pack.
This DAO aims to strictly ensure that power banks and portable power packs to be imported, manufactured, distributed, or sold in the Philippines meet the specified safety requirements.
This Technical Regulation prescribes the mandatory product certification of power banks and portable power packs whether locally manufactured or imported, as follows:
– Power banks and portable power packs devices with an input voltage supplied by DC power source with rated maximum up to 60 Vdc, or by an AC mains power source through direct plug in construction;
– Power banks that provide DC output(s) with rated maximum up to 60 Vdc;
– Portable power packs with at least one output option such as, but not limited to booster cable assemblies, receptacles, DC connectors, vehicle adapter sockets, USB connectors, and induction power transmitters. Additional outputs are not restricted;
– Power banks and portable power packs with integral photovoltaic cells as a power source; and
– Power banks and portable power packs that are incorporated with and/or forms integral part of another device

Saudi Arabia 沙特阿拉伯

SASO 推迟实施 USB Type-C 测试报告的要求至2026年5月1日 “SASO 已决定推迟实施 USB Type-C 测试报告的要求。
在 2026 年 5 月 1 日之前，仍可接受企业自行声明作为符合 USB Type-C 要求的证明。

SASO has decided to postpone the implementation of the requirement to provide USB Type-C test reports.
Until 1 May 2026, a self-declaration will continue to be accepted as proof of compliance with the USB Type-C requirements.

Saudi Arabia 沙特阿拉伯

沙特阿拉伯发布《网络安全服务、产品和解决方案许可监管框架》

沙特阿拉伯发布了《网络安全服务、产品和解决方案许可监管框架》。
该框架旨在透过明确被授权者的责任和义务，规范沙特阿拉伯境内网络安全服务和产品的供应，从而提升此类服务、产品和解决方案在交付给各类实体时的效率和质量。

Saudi Arabia issued Regulatory Framework for Licensing Cybersecurity Services, Products and Solutions.
This Framework aims to regulate the provision of cybersecurity services and products in the Kingdom through a regulatory framework that defines the responsibilities and obligations of the licensee, contributing to promoting the efficiency and quality of such services, products, and solutions during their delivery to various entities.

Singapore 新加坡

新加坡发布蜂窝行动终端技术规范

2026年3月6日，新加坡资讯通信媒体发展局 (IMDA) 发布了蜂窝移动终端技术规范 (IMDA TS CMT Issue 1 Rev 4)。该技术规范的更新内容包括：
自2026年12月31日起，所有手机必须默认禁用2G网络；
自2026年4月1日起，所有手机必须具备紧急小区广播功能；
在上述日期之前达到产品生命周期结束 (EOL) 的设备不受上述要求的约束。

On March 6, 2026, the Infocomm Media Development Authority (IMDA) of Singapore published the Technical Specification for Cellular Mobile Terminals (IMDA TS CMT Issue 1 Rev 4). Updates to the specification include:
From December 31, 2026, all phones must disable 2G networks by default;
From April 1, 2026, all mobile phones must have emergency community broadcasting functions;
Devices that reach the end of product life (EOL) before the above date are not subject to the above requirements.

Singapore 新加坡

新加坡网络安全局与日本经济产业省相互认可物联网网络安全计划

新加坡网络安全局 (CSA)于2026年3月18日发布新闻稿，宣布CSA与日本经济产业省 (METI) 已签署合作备忘录 (MoC)，相互认可物联网网络安全认证体系CLS和JC-STAR。该合作备忘录将于2026年6月1日起生效。

Singapore CSA and Japan METI Mutually Recognize IoT Cybersecurity Schemes
The Cyber Security Agency (CSA) of Singapore issued a press release on March 18, 2026, announcing that CSA and the Ministry of Economy, Trade, and Industry (METI) in Japan have signed a Memorandum of Cooperation (MoC) to mutually recognize IoT cybersecurity labelling schemes CLS and JC-STAR. This MoC will take effect starting June 1, 2026.

Singapore 新加坡

新加坡网络安全局更新家用路由器强制性要求

新加坡网络安全局 (CSA) 于2026年3月2日发布新闻稿，宣布CSA与资讯通信媒体发展局 (IMDA) 将于2027年底前，将家用路由器的强制性网络安全要求从“网络安全标签计划”一级提升至二级。

Singapore CSA Updates Mandatory Requirements for Residential Routers
The Cyber Security Agency (CSA) of Singapore issued a press release on March 2, 2026 announcing that CSA and Infocomm Media Development Authority (IMDA) will raise mandatory cybersecurity requirements from Cybersecurity Labelling Scheme Level 1 to Level 2 for residential routers by the end of 2027.

South Korea 韩国

韩国MSIT发布2026-9号公告提高6GHz Wi-Fi功率限值

2026年2月10日，韩国科学技术信息通信部 (MSIT) 发布了2026-9号公告，修订了免许可无线电设备的技术标准，以支持工业基础设施建设并提升用户便利性。其中主要修订如下：
Wi-Fi 7 (6GHz 频段): 提高室内和地铁环境6GHz频段功率限制，以增强高速连接，其中在5925-6425MHz频段，室内和地铁车厢内允许1W EIRP，此前该频段仅允许0.5W EIRP；在6425-7125MHz频段室内环境仍然允许0.5W EIRP；
高级蓝牙：更新技术标准，纳入最新蓝牙技术使用的新型无线电传输格式；
超宽带 (UWB) 与定位：完善超宽带 (UWB) 和定位技术的要求，以确保数据传输的准确性和节能性。

On February 10, 2026, South Korea’s Ministry of Science and ICT (MSIT) issued Announcement No. 2026-9, revising the technical standards for license-exempt radio equipment to support industrial infrastructure construction and improve user convenience. The main revisions are as follows:

Wi-Fi 7 (6GHz band): Increased power limits for indoor and metro environments to enhance high-speed connectivity, with 1W EIRP allowed indoors and in subway cars in the 5925-6425MHz band, compared to the previous 0.5W EIRP in this band; 0.5W EIRP remains unchanged in the 6425-7125MHz band indoor environment;
Advanced Bluetooth: Updated technical standards to include new radio transmission formats used by the latest Bluetooth technology;
Ultra-wideband (UWB) and positioning: Improve the requirements of ultra-wideband (UWB) and positioning technology to ensure the accuracy and energy efficiency of data transmission.

Vietnam 越南

越南提出货物和产品可追溯性规定的通知草案

[法规草案] 越南提出工贸部管辖范围内货物和产品可追溯性规定的通知草案。
该草案要求贸易商/进口商注册高风险产品并产生二维码以确保可追溯性。
该草案征求意见截止日期为2026年4月20日。

Vietnam proposes Draft Circular stipulating regulations on traceability of goods and products under the management of Ministry of Industry and Trade.
It requires the trader/importer to register the high risk products and generate QR code to ensure traceability.
The draft receives comments till Apr-20 fo 2026.

Ukraine 乌克兰

乌克兰批准服务器和数据储存产品生态设计要求的技术法规

乌克兰发布第160/2026号法令，批准服务器和数据储存产品生态设计要求的技术法规。该法规依据欧盟第2019/424号条例制定。

Ukraine publishes Decree No. 160/2026 to approve Technical Regulation on Ecodesign Requirements for Servers and Data Storage Products. It is developed based on Regulation (EU) 2019/424.

India 印度

印度 BIS 发布 IS/IEC 62368-1:2023 换版执行指南草案

[法规草案] 2026年3月9日，印度标准局 (BIS)，根据印度电子和信息技术部（MeitY）2025年10月29日的公告，发布IS/IEC 62368-1:2023（音视频、信息及通讯科技设备安全要求）新标准的实施指南草案，该标准将取代旧有的 IS 13252 (Part 1):2010 及 IS 616:2017 。
关键时间表：并行期与截止日
BIS 针对不同产品类别设定了两类不同的过渡期限：
1. 扩增实境/虚拟现实 (Extended Reality) 产品
适用对象： AR/VR/MR 设备 。
并行期截止日： 2026年5月1日 。
2. 其他 38 类电子信息产品
适用对象： 笔记本电脑、手机、电视、电源适配器、打印机、服务器、智能手表、蓝牙喇叭等 。
并行期截止日： 2028年11月1日 。
执行指南核心要点
•A. 现有执照持有人 (Existing Licensees)
1.测试要求： 必须针对执照范围内的所有主检型号 (Lead Models)，提交由 BIS 认可实验室出具的 IS/IEC 62368-1:2023 完整测试报告 。
2.系列型号声明： 需提供承诺书，确认系列中的其他型号也符合新标准要求 。
3.关联标准：
o电视机： 若更换标准影响到 IS 18112:2025 的合规性，需一并提交相关报告 。
o手机： 若影响到 IS 16333 (Part 3):2022（印度语言支持），需提交相关报告 。
oCCTV： 若影响到 IP 摄像机安全要求，需提交相关报告 。
o注：若无影响，则提交不相关声明即可 。
•B. 新申请人 (New Applicants)
1.受理规范： 目前仍可选择按旧标准或新标准申请 。
2.转换承诺： 若选择按旧标准申请，必须提交声明，保证在并行期截止日前完成新标准转换 。
3.硬性截止： 超过各类别规定的截止日后，BIS 将不再核发旧标准执照 。
•C. 扩展执照范围 (Change in Scope)
1.增加型号的申请必须在转换完成前或并行期截止日前 (以较早者为准) 按旧标准办理，否则必须直接符合新标准

On March 9, 2026, the Bureau of Indian Standards (BIS), based on a notice issued by the Indian Ministry of Electronics and Information Technology (MeitY) on October 29, 2025, released a draft implementation guide for the new standard IS/IEC 62368-1:2023 (Safety Requirements for Audio-Visual, Information and Communication Technology Equipment). This standard will replace the older IS 13252 (Part 1):2010 and IS 616:2017.
Key Timeline: Parallel Period and Deadline
BIS has set two different transition periods for different product categories:
1. Augmented Reality/Virtual Reality (AR/VR/MR) Products
Applicable to: AR/VR/MR devices.
Parallel Period Deadline: May 1, 2026.
2. Other 38 Categories of Electronic Information Products
Applicable to: Laptops, mobile phones, televisions, power adapters, printers, servers, smartwatches, Bluetooth speakers, etc.
Parallel Period Deadline: November 1, 2028.
Key Points of the Implementation Guidelines
• A. Existing Licensees
1. Testing Requirements: A complete test report for IS/IEC 62368-1:2023, issued by a BIS-accredited laboratory, must be submitted for all lead models within the scope of the license.
2. Series Model Declaration: A commitment letter confirming that other models in the series also comply with the new standard requirements is required.
3. Relevant Standards:
o Televisions: If the standard change affects compliance with IS 18112:2025, a relevant report must be submitted.
o Mobile Phones: If it affects IS 16333 (Part 3):2022 (Indian language support), a relevant report must be submitted.
o CCTV: If it affects IP camera security requirements, a relevant report must be submitted.
Note: If there is no impact, submit an irrelevant declaration.
• B. New Applicants
1. Processing Guidelines: Applications can still be submitted under either the old or new standard.
2. Conversion Commitment: If applying under the old standard, a declaration must be submitted guaranteeing completion of the conversion to the new standard before the parallel period deadline.
3. Hard Deadline: After the deadline specified for each category, BIS will no longer issue licenses under the old standard.
• C. Change in Scope
1. Applications adding models must be processed under the old standard before the conversion is completed or before the parallel period deadline (whichever is earlier); otherwise, they must directly comply with the new standard.

India 印度

关于公共采购 (优先采购印度制造产品) 令 (PPP-MII) 中闭路电视摄影机测试要求的澄清

2026年2月4日，印度电子信息技术部 (MeitY) 发布通告，透过整合「印度制造优先令」(PPP-MII) 和「强制注册令」(CRO) 这两个独立的监管框架，简化了闭路电视摄影机的安全合规流程。
• 核心监管更新：统一测试标准：由于CRO和PPP-MII下的安全基本要求 (ER) 相同，因此，为CRO注册签发的STQC测试报告现已正式适用于PPP-MII合规。
• 授权机构：所有安全测试必须由STQC局或MeitY指定的机构进行。
• 有效期限：STQC签发的安全测试报告自签发之日起有效期限为三年。
• 范围限制：STQC签发的安全认证仅限于技术合规性，与PPP-MII要求的本地增值计算无关。

On February 4, 2026, MeitY circular streamlines the security compliance process for CCTV cameras by aligning two separate regulatory frameworks: the PPP-MII Order (Preference to Make in India) and the CRO (Compulsory Registration Order).
•Core Regulatory Updates: Unified Testing Standard: Since the Essential Requirements (ERs) for security are identical under both CRO and PPP-MII, STQC test reports issued for CRO registration are now officially applicable for PPP-MII compliance.
•Authorized Agency: All security testing must be conducted by the STQC Directorate or a MeitY-notified agency.
•Validity Period: Security test reports issued by the STQC remain valid for three years from the date of issuance.
•Scope Limitation: Security certifications issued by STQC are strictly for technical compliance and have no linkage to the calculation of local value addition required under PPP-MII.

 

Israel 以色列

以色列关于单相16A及以下插头和插座的强制性标准SI 32第1.1部分第三次修订将在2026年8月8日生效

关于单相16A及以下插头和插座的强制性标准SI 32第1.1部分第三次修订已在以色列官方公报政府公告栏第12252号发布，并将于2026年8月8日生效。 The third amendment to the Mandatory Standard SI 32 part 1.1, dealing with plugs and socket-outlets for single-phase up to 16A, was published in the Israel Official Gazette, Section of Government Notices, no. 12252, and will enter into force on 8 August 2026.
South Korea 韩国 电气用品及生活用品安全管理运作要领修订公告_Safety部分对象分类调整 “韩国KATS发布编号2026-56国家技术标准公告，2026年4月1日开始KC安规以下几个产品产品分类出现变更：
吸尘器大类 (吸尘器、蒸汽清洗机、高压清洗机等)，洗衣机和脱水机大类 (洗衣机、脱水机、洗烘一体机)，电磁炉，烘干机大类 (烘干机、烘手机、衣物管理机等)，卫生间用电器大类 (智能马桶、智能坐便等) 从安全认证对象改成安全确认对象。
改为安全确认之后，这些产品在申请KC safety认证时不需要厂检。

The Korean Agency for Technology and Standards (KATS) has issued National Technical Standards Notice No. 2026-56. Starting from 1 April 2026, the KC safety regulatory classification for the following product categories has been revised:
•Vacuum cleaner category (including vacuum cleaners, steam cleaners, high-pressure cleaners, etc.)
•Washing machine and spin dryer category (including washing machines, spin dryers, washer-dryer combo units)
•Induction cooktops
•Dryer category (including dryers, hand dryers, garment care appliances, etc.)
•Bathroom electrical appliances (including smart toilets, electronic bidet seats, etc.)
These products have been reclassified from Safety Certification to Safety Confirmation.
After being reclassified under Safety Confirmation, these products will no longer require factory inspection when applying for KC safety certification.

Oman 阿曼

阿曼个人电动代步工具 (电动滑板车) 技术法规

阿曼标准化与计量总局 (DGSM) 已于 2025 年 10 月 30 日 通过了个人电动代步工具的技术要求，适用于以下产品类别：
1.无座椅电动滑板车 (包括具可拆卸座椅的滑板车)
2.有或无座椅的自平衡交通工具 (如平衡车)
3.有或无座椅的电动独轮车
4.配件与组件 (如电池、充电器／转接器)
进口商必须为每批货物出具 符合性声明 (Declaration of Conformity)。
产品在投放市场前，必须依照法规要求标示 海湾合格评定标志 (GCTS)。
•生效日期：2026 年 1 月 1 日
•强制实施日期：2026 年 4 月 30 日
•已经在市场上产品过渡期结束：2027 年 4 月 30 日

The Oman Directorate General of Standardization and Metrology (DGSM) adopted on 30 October 2025 the technical requirements applicable to specific categories of personal electric mobility devices. The regulation covers the following products:
1.Electric scooters without a seat, including scooters with detachable seats
2.Self-balancing transport devices with or without a seat (e.g., hoverboards)
3.Electric mono-wheels with or without a seat
4.Electric skateboards
5.Accessories and components (such as batteries and chargers/adapters)
Importers are required to issue a Declaration of Conformity for each shipment.
Products must bear the Gulf Conformity Tracking Mark (GCTS) in accordance with the regulation before being placed on the market.
•Effective date: 1 January 2026
•Mandatory application: 30 April 2026
•Transitional period for products already in the market ends: 30 April 2027

 

家用电器 House Appliances

Australia 澳洲

2026年3月3日起在澳洲销售商用制冰机，需标识能效注册

商用制冰机的供货商、制造商和零售商必须为其受管控之产品类别符合《温室气体和能源最低标准（GEMS）商用制冰机决定 2025》及注册。
自 2026 年 3 月 3 日起，受该决定管控的产品类别，必须在销售前完成GEMS监管机构注册。

Suppliers, manufacturers and retailers of commercial ice-makers must register models covered by the Greenhouse and Energy Minimum Standards (GEMS) Commercial Ice-makers Determination 2025. Entities cannot sell models covered by the Determination from 3 March 2026, unless the models are registered with the GEMS Regulator.

 

Kuwait 科威特

科威特立法禁止进口和生产使用R22制冷剂的空调机组

科威特工商部2026年第19号法令已于2026年2月22日正式生效，并在科威特官方公报上公布。
该法令禁止进口和生产使用R22制冷剂的空调机组。
法令内容如下：
• 立即禁止进口使用R22制冷剂的空调机组。
• 现有R22机组相关零部件的进口享有10年过渡期。
• 本地制造商有3年时间更新和过渡其生产线，以使用替代制冷剂。
根据该法令，所有目前有效的R22空调机组能效等级 (EER) 注册证书将被暂停使用。

Kuwait MOCI Decree No. 19 of 2026 has officially entered into force on the 22nd of Feb. 2026 and published in the Kuwaiti Official Gazette.
The decree introduces the ban on the import and manufacturing of air conditioning units that operate using R22 refrigerant.
The decree states the following:
• Immediate prohibition on the import of air conditioning units operating with R22 refrigerant.
• A transition period of 10 years has been granted for the import of spare parts related to existing R22 units.
• Local manufacturers have been provided a 3-year timeline to update and transition their production lines to operate with alternative refrigerants.
Based on this decree all current valid EER registration certificates for R22-operated air conditioners will be suspended.

Malaysia 马来西亚

马来西亚新的空调星级评分系统于2026年1月1日生效

2025年12月30日，能源委员会 (Suruhanjaya Tenaga，ST) 宣布实施新的空调星级评分表。公告概述了制造商和进口商必须遵守的更新节能标签规则和认证要求。新的星级评分系统于2026年1月1日生效。

On December 30, 2025, the Energy Commission (Suruhanjaya Tenaga, ST) announced the implementation of a new star rating system for air conditioners. The announcement outlines the updated energy efficiency labeling rules and certification requirements that manufacturers and importers must comply with. The new star rating system will take effect on January 1, 2026.

Saudi Arabia 沙特阿拉伯

沙特发布SASO 2885:2025 (电动洗衣机能效和水效) 的新草稿版本

[法规草案] 沙特标准组织 (SASO) 就 SASO 2885:2025“电动洗衣机-能效和用水性能要求及标签””向世界贸易组织 (WTO) 发布了通知。
本通知涉及沙特标准 SASO 2885 的新修订草案，标题为“电动洗衣机——能效和用水性能要求及标签”。该草案纳入了根据此前已通知的 Rv1 版本标准收到的意见而作出的修订。该标准规定了容量不超过 25 公斤的市电供电式洗衣机和洗烘一体机的最低能效要求 (MEPS)，以及测试、计算和标签程序，包括嵌入式洗衣机、多桶洗衣机和洗烘一体机。该标准还涵盖市电供电但也可由电池供电的电器。
最终意见征集截止日期为 2026 年 5 月 12 日。

SASO issued WTO notification regarding SASO 2885:2025 – “”Electrical Clothes Washing Machines – Energy and Water Performance Requirements and Labelling
This notification concerns new draft revision of Saudi Standard SASO 2885, titled: “”Electrical Clothes Washing Machines – Energy and Water Performance Requirements and Labelling.””This draft incorporates revisions made in response to comments received on the previously notified Rv1. version of the standard.The standard specifies the Minimum Energy Performance Requirements (MEPS) as well as the testing, calculation, and labelling procedures for electric mains-operated washing machines and washer-dryers with capacities up to 25 kg, including built-in units, multi-drum washing machines, and washer-dryers. The scope also includes appliances that are mains-operated but can additionally be powered by batteries.
The final comment date is 12 May 2026.

 

能源效率要求 Energy Efficiency Requirements

EAEU 欧亚经济联盟

EAEU发布能效法规TR EAEU 048/2019的更新草案公众咨询

[法规草案] 2026年3月5号，EAEU发布了能效法规TR EAEU 048/2019的更新草案公众咨询：Draft Amendments No. 1 to the Technical regulation of the Eurasian Economic Commission «On Requirements to Energy Efficiency of Energy Consuming Devices»。评论日期截止2026年5月8号，批准及生效日期待定。

EAEU published draft amendments No. 1 to the Technical regulation of the Eurasian Economic Commission «On Requirements to Energy Efficiency of Energy Consuming Devices» (TR EAEU 048/2019.The final date for comments is 8 May 2026. Proposed date of adoption and proposed date of entry into force is to be determined at a later time.

 

China Taiwan 中国台湾

台湾发布《空气压缩机最低能效标准及能效等级标签和检验要求》修订草案

[法规草案] 经济部标准检验局 (BSMI)预告修正「空气压缩机容许耗用能源基准与能源效率分级标示」相关规定。
-扩大管制范围：出口压力管制范围调整
-基准调整：提高可变转速回转式空压机能效基准，并新增液冷式产品的计算公式 。
-行政优化：删除光盘检送方式，推行电子化申请，并加强主管机关抽样检测与见证测试的权限 。
-文字修正：明确规范对象为供国内用户，并将「公司」修正为「厂商」以符合法规体例 。
根据公告内容，目前处于草案预告阶段。对公告内容有意见者，请于公告刊登隔日起 60 日内 (即 2026 年 5 月中旬前) 陈述意见。

The Ministry of Economic Affairs announced draft amendments to energy efficiency standards for air compressors on March 11, 2026. Key updates include:
-Expanded Scope: Adjusting the discharge pressure range
-Enhanced Standards: Raising the Minimum Energy Performance Standards (MEPS) for variable-speed rotary compressors and introducing calculation formulas for liquid-cooled models.
-Administrative Changes: Discontinuing the use of CD-ROMs for report submissions in favor of digital processes, and granting authorities the power to perform sampling and witnessed testing before registration.
-Clarifications: Adding “”for domestic use”” to specify the regulated products and standardizing legal terminology (e.g., changing “”company”” to “”manufacturer””).

 

灯具 / LED Luminaiaries/LED

India 印度

印度发布《IS 16102 (Part 1):2026通用照明用自镇流LED灯具》实施指南

印度发布了《IS 16102 (Part 1):2026通用照明用自镇流LED灯具 – 第1部分安全要求》实施指南。自2026年8月3日起，新版标准IS 16102 (Part 1):2026将取代旧版标准IS 16102 (Part 1):2012。
在2026年8月2日的过渡期内，现有许可证/证书持有人和新的许可证/证书申请人应遵循该指南中的说明。

India publishes Guidelines for implementation of IS 16102 (Part 1):2026 Self-Ballasted LED Lamps for General Lighting Services – Part 1 Safety Requirements. Starting from Aug-3 of 2026, new version standard IS 16102 (Part 1):2026 will replace old version standard IS 16102 (Part 1):2012.
During transition period by Aug-2 of 2026, the existing licensees/certfication holders and new applicants for licence/certificate shall follow instructions in the guidelines.

 

其他 / 多主题产品 Others / Products with Multiple Subjects

EAEU 欧亚经济联盟

欧亚经济联盟公布须遵守可追溯性机制的商品清单

欧亚经济联盟公布了进口到欧亚经济联盟关卡的商品清单，这些商品须遵守可追溯性机制。欧亚经济联盟内部的可追溯性机制将于2026年9月1日全面生效。
新增的受监管商品清单包括:
-家用冰箱和冰柜
-洗衣机
-显示器、投影机和电视设备
-婴儿推车和汽车安全座椅
-专用设备 (推土机、挖土机、装载机)
其他强制性商品清单可在欧亚经济联盟海关总署 (Chestny ZNAK) 官方网站查询。列入强制清单的商品必须符合可追溯性要求。

EAEU published list of goods imported into the customs territory of the Eurasian Economic Union subjects to traceability mechanism. The traceability mechanism within the EAEU will come into full operation on September 1, 2026.
The newly-added regulated list of products includes:
Household refrigerators and freezers.
Washing machines.
Monitors, projectors and TV equipment.
Baby strollers and car seats.
Special equipment (bulldozers, excavators, loaders)
Other products can be found in the Chestny ZNAK official website. Products fall into the mandatory list need to comply with the traceability requirement.

 

Ukraine 乌克兰

乌克兰发布命令以修订机械技术法规标准清单

乌克兰发布第2687/2026号命令，修订机械技术法规标准清单。该令与欧盟委员会第2026/80号实施决定一致。

Ukraine publishes Order No.2687/2026 to amend standard list of Technical Regulation on Machinery. The Order is aligned with Commission Implementing Decision (EU) 2026/80

UK 英国

英国预计继续对机械设备认可包括CE标志在内的某些欧盟要求

自2021年1月1日起，英国继续认可带有CE标志的机械设备以及带有UKCA (英国合格评定) 标志的机械设备，适用于投放英国市场的相关产品。这种做法使得企业在向英国市场投放产品时可以选择使用其中一种产品标志。英国政府正在引入《2026年机械供应 (安全) (修订和过渡条款) 条例》(简称 “2026年英国条例”)，以继续认可包括CE标志在内的某些欧盟要求，从而使符合这些要求的机械设备能够在满足特定条件的情况下投放英国市场。这将反映欧盟机械指令的变更。透过该立法扩大CE认可范围将适用于英国 (英格兰、苏格兰和韦尔斯)。

Since 1 January 2021, the UK has continued to recognise CE marked machinery equipment alongside the UKCA (UK Conformity Assessed) marked machinery, for relevant products placed on the GB market. This approach has enabled businesses to use either product marking when placing goods on the GB market. The UK Government (UKG) is introducing the Supply of Machinery (Safety) (Amendment and Transitional Provisions) Regulations 2026 (‘the GB Regulations 2026)’ to continue recognition of certain EU requirements including the CE marking so that machinery meeting these requirements can be placed on the Great Britain (GB) market, subject to certain conditions. This will reflect the changes to the EU machinery directive.The extension of CE recognition through this legislation will apply to Great Britain (England, Scotland, and Wales).

India 印度

印度公布8项质量控制令的修订

印度公布了对8项质量控制令的修订，其中规定，凡在「Udyam门户网站」注册的微型、小型和中型企业部可免于认证的条件。
– 火焰打火机 (品管) 令，2023年
– 饮用水瓶 (质量管理) 令，2024年
– 焊条和焊条 (质量控制) 令，2023年
– 家用保温瓶、保温壶和保温容器 (质量控制) 令，2024年
– 电吊扇 (品管) 令，2023年
– 实验室玻璃器皿 (质量管理) 令，2023年
– 空气冷却器和空气过滤器 (质量控制) 令，2025年
– 家具 (质量控制) 令，2025年

India publishes amendments to 8 Quality Control Orders, it exempts certification for an enterprise, registered under Udyam Portal of the Ministry of Micro, Small and Medium Enterprises, wherein the investment in plant and machinery or equipment at original cost does not exceed rupees one crore and the turnover do not exceed rupees five crore for the previous financial year as certified by a Chartered Accountan.
– Flame-Producing Lighters (Quality Control) Order, 2023
– Potable Water Bottles (Quality Control) Order, 2024
– Welding Rods and Electrodes (Quality Control) Order, 2023
– Insulated Flask, Bottles and Containers for Domestic Use (Quality Control) Order, 2024
– Electric Ceiling Type Fans (Quality Control) Order, 2023
– Laboratory Glassware (Quality Control) Order, 2023
– Air Cooler and Air Filters (Quality Control) Order, 2025
– Furniture (Quality Control) Order, 2025

India 印度

印度 Meity 对高度专业化设备 (HSE) 定义且进口/制造量极低的产品发布指令

Meity于2026年3月12日 公告 ⟪Procedure for issuance of exemption for Highly Specialized Equipment (HSE) under the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021.⟫ ，适用于符合 高度专业化设备 (HSE) 定义且进口/制造量极低的产品 。
生效日期: 2026年6月15日 起正式实施 。
HSE 判定标准: 设备必须同时满足「数量限制」与「技术指标」任一项:

申请要点:

提醒: 透过 ICEGATE 门户网站使申请流程更加精简，但也强化了品牌方在授权证明、文件齐备性及数量追踪方面的严格责任 。
•总量管制: 100 台的限额是计算该型号在全球所有产地进入印度的总和 。
•转制要求: 一旦该年度进口量达到 100 台，Meity 将停止核发豁免，后续必须取得正式的 BIS 注册 。
•清关连动: 豁免信将直接透过 ICEGATE 系统传输，海关将以此为凭放行 。
MeitY Circular dated 12.03.2026:

Procedure for issuance of exemption for Highly Specialized Equipment (HSE) under the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021.

This applies to products that meet the definition of Highly Specialized Equipment (HSE) and are imported or manufactured in very low volumes.
Effective Date: Effective from 15th June, 2026.
HSE Qualification Criteria: Equipment must satisfy both the “”Quantity Limit”” and any one of the “”Technical Requirements””:

Application Key Points:

Reminder: While the process is more streamlined through the ICEGATE portal, it also introduces stricter accountability for brands regarding authorization, documentation, and quantity tracking.
•Total Quantity Control: The quantity limit of 100 units is counted across the regulatory model number from all locations.
•Registration Requirement: Once the exemption quantity reaches 100, MeitY will cease issuing exemptions, and the manufacturer must obtain BIS Registration.
•Customs Integration: Exemption letters are issued through the ICEGATE portal, and Customs shall allow imports based on these letters.

Israel 以色列

以色列经济部澄清雷射笔的合规需求

以色列经济部进口管理局澄清，尽管雷射笔进口程序中对专业用途的1-2类雷射笔有所规定，但实际上并不需要工业标准协会 (SI) 对产品风险等级的认证，只需提供卷标和标记测试合格证书即可。

The Import Administration at the Ministry of Economy clarifies that despite what is stated in the Laser Pointer Import Procedure, regarding laser pointers in categories 1-2 for professional use, the Standards Institution of Industry’s approval for the risk level of the product is not required, but only a certificate of compliance with the labeling and marking tests.

China Taiwan 中国台湾

台湾发布修订“强制检验项目参考商品分类代码 (数据传输设备和玩具)

经济部标准检验局 (BSMI) 公告修正应施检验商品之参考货品分类号列，涉及「数据传输设备」(如路由器、交换器等，排除医疗器材及电信终端设备) 及「玩具」两类产品。此次修正系配合经济部国际贸易署调整进出口货品号列，新增及删除部分分类号列，并同步更新相关检验适用范围。此变更属于分类号列调整，并未改变原有检验义务，但将影响报验及通关作业。

The Bureau of Standards, Metrology and Inspection (BSMI), under the Ministry of Economic Affairs (MOEA), has revised the reference commodity classification codes for mandatory inspection items, covering “data transmission equipment” (e.g., routers, switches, excluding medical devices and telecom terminal equipment) and “toys.” The revision aligns with updates made by the International Trade Administration, including the addition and removal of specific HS codes and corresponding import regulations. While the inspection scope remains unchanged, the update affects customs declaration and clearance procedures.