资讯 / 电信 ITE / Telecom

Australia澳大利亚

澳大利亚发布2024年网络安全法草案

[法规草案] 澳大利亚于2024年10月10日发布网络安全法草案。根据该草案，责任实体将被要求在澳洲制造和/或供应智能型设备，遵守指定设备的相关安全标准，另外责任实体可能还必须提供合规声明。

The proposed Australian Cyber Security Bill establishes the power for the relevant Minister to make mandatory security standards for smart devices, also known as Internet of Things (IoT) devices, under Ministerial rules. To ensure international alignment, Australia will define these  devices as relevant connectable products, consistent with the UK definition per section 5 of the Product Safety and Telecommunications Act 2022.

Under the Cyber Security Bill, responsible entities will be required to manufacture and/or supply smart devices in Australia in compliance with the relevant security standard for the specified device. Responsible entities will be required to provide a statement of compliance if requested by the Secretary of the Department of Home Affairs.

Standards made under Ministerial rules could apply to all devices that meet the definition of relevant connectable product, or be limited to a subset, type, or class of devices, which will be defined in the relevant security standard under rules.  All security standards introduced as rules under the proposed Cyber Security Bill will be subject to a 28 day consultation period prior to being introduced under this Bill.

 

Bangladesh孟加拉

开放WiFi 6E频段

孟加拉国电信监管委员会 (BTRC) 于2024年9月15日发布了一份通知，宣布委员会批准6GHz 频段中的5925-6425 MHz频段在Wi-Fi、物联网和WLAN设备的蜂窝移动网络中共享使用。

The Bangladesh Telecommunication Regulatory Commission (BTRC) published a Circular on September 15, 2024, announcing that the 5925-6425 MHz frequency band of the 6 GHz band was been approved by the Commission for shared use in the cellular mobile network for Wi-Fi, IoT and WLAN devices.

 

Brazil巴西

ANATEL 通知将不再允许更新过期超过 180 天 (6 个月) 的证书

近期，ANATEL向OCD委员会传达了关于证书续订的重要更新，宣布将严格执行2019年第715号决议中关于证书过期超过180天 (即6个月) 后无法续订的规定。

对于过期超过 180 天的证书，现在必须提交新的项目申请，包括新的测试和新的 ANATEL ID 号码。对于 OCD 已经签约的正在进行的续约项目，ANATEL 目前正在评估是否接受其续约。 ANATEL 做出最终决定后，我们将立即通知您最新情况。

ANATEL informed the OCD’s committee that it will no longer allow the renewal of certificates that have been expired for more than 180 days (6 months).

For certificates expired for more than 180 days, it will now be mandatory to submit a new project application, including new testing and a new ANATEL ID number.

For ongoing renewal projects that OCDs have already been contracted for, ANATEL is currently evaluating whether to accept their renewal. We will keep you updated as soon as a final decision is made by ANATEL.

 

Brazil巴西

ANATEL 发布14430 号法案，提议要求新产品不可只仅仅使用 3G 或更低技术运行

2024年10月7日，ANATEL 发布了新的 14430 号法案。该法案是第 36/2024 号公众咨询后的最终标准，该标准提议要求新产品不可只仅仅使用 3G 或更低技术运行，因为巴西将在未来最终关闭 2G 和 3G 技术。

Last week, ANATEL issued the new Act 14430. This Act is the final standard after Public Consultation No 36/2024 that proposes to obligate new products to not operate only with 3G technologies or lower, for an eventual shutdown of 2G and 3G technologies in Brazil in the future.

The new standard will be into force on April 06th 2025, and includes the following requirements:

1. Addition to Act No. 3151:

• 4.4: Certification of modules or final products classified as Personal Mobile Service Access Terminal Stations, which are compatible only with 3G or lower technologies, is not permitted.
• 4.5: Modules or final products classified as Personal Mobile Service Access Terminal Stations capable of making voice calls must support VoLTE (Voice over LTE) technology, including emergency calls, and for exchanging SMS over IMS (IP Multimedia Subsystem).

2. Addition to Act No. 3152:

• 4.5: Certification of mobile phones compatible only with 3G or lower technologies is not permitted.
• 4.6: Mobile phones must support voice calls using VoLTE (Voice over LTE) technology, including emergency calls, and for exchanging SMS over IMS (IP Multimedia Subsystem).

3. Equipment compatible only with 3G or lower technologies, approved before this Act takes effect, can maintain their certifications without needing to adjust to the new requirements.

For more details, click here to open the official document.

 

India印度

Meity宣布关于监视摄影机安全的基本要求的实施日期将延后至2025年4月9日

印度政府电子和信息技术部 (Meity) 宣布，原定于2024年10月9日生效的「2021年电子和信息技术商品强制注册令」中关于监视摄影机安全的基本要求的实施日期，将延后至2025年4月9日。

The Indian Ministry of Electronics and Information Technology (Meity) has announced a delay in the implementation of the “Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order, 2021” regarding the essential security requirements for CCTV. Originally scheduled to take effect on October 9, 2024, the new implementation date is now April 9, 2025. This extension provides businesses with additional time to comply with the new safety standards for electronic products sold in the Indian market.

 

Japan日本

日本总务省制定相容多张SIM卡的手机的新规定

为了确保紧急呼叫的互操作性，日本总务省(MIC)将针对紧急呼叫未接通时的行为制定有关兼容多张SIM卡的手机的新规定。当一张SIM卡无法拨打紧急电话时，兼容多SIM卡的手机必须具备自动切换SIM卡并尝试再次拨打电话的功能。

此外，总务省也将制定兼容多张SIM卡的手机的测试方法。

In order to ensure the interoperability of emergency calls, new provisions about mobile phones compatible with multiple SIM will be established for behavior in the event that an emergency call is not connected.

When an emergency call cannot be made with a SIM, mobile phones compatible with multiple SIM will be obligated to have the function to switch SIMs automatically and try to make another call again.

In addition, Ministry of Internal Affairs and Communications will establish testing methods for mobile phones compatible with multiple SIMs.

 

Mexico墨西哥

IFT seal将从 2025 年 7 月 1 日起成为强制性要求

新指南将于 2025 年 7 月 1 日生效，制造商和分销商需要了解更新后的要求，以确保获得批准的商品符合要求。这些更新概述了 IFT 标签、其应用和相关的认证编号的新规则。
With new guidelines set to take effect on July 1st, 2025, manufacturers and distributors need to understand the updated requirements to ensure compliance for approved products. These updates outline new rules for the IFT label, its application, and the associated homologation certification number.

Key Changes to the IFT Labeling Requirements:

Starting on July 1st, 2025, all approved products must comply with the updated IFT labeling rules. Specifically, the main changes include:

• Label Formats: The IFT label must be printed, digitized, or reproduced in one of the following color formats:
• 100% positive black
• 100% negative black
• 100% positive grey
• 100% negative grey
• Visibility and Legibility: The IFT label must be legible without magnification and easily visible to the end-user. As a result, this ensures clear communication of product certification.
• Dimensions and Protection Areas: Manufacturers must adhere to the minimum protection areas and dimensions specified in the guidelines. This is critical for ensuring the IFT label’s clarity and effectiveness when printed, scanned, or reproduced.
• Homologation Number: In addition to the IFT label, products must include the prefix “IFT” in capital letters, along with the Homologation Certificate number, as per the Thirty-eighth guideline of the Homologation Guidelines.

Products Exempt from the New Labeling Rules:

While the new guidelines will be mandatory starting from July 1st, 2025, several exceptions apply. The following products will not need to include the new IFT label:

• Approved Products Prior to July 1st, 2025: Products that have already received approval and an IFT Certificate before the enforcement date are exempt from the updated labeling requirements.
• Ongoing Approval Processes: Products currently undergoing homologation will not be required to comply with the new label guidelines if their approval process is not completed by July 1st, 2025.
• Specific Request Exemptions:
• Products that have submitted a Request for Reissue of an IFT Certificate issued before the guidelines take effect.
• Products that have applied for an extension of a Type A IFT Certificate for a family of product models or IoT devices, provided the original certificate was issued before the guidelines take effect.
• Products that have filed a Report on changes in the Product for Type A IFT Approval, as long as they have a valid Approval Certificate issued prior to July 1st, 2025.

To ensure products are fully compliant by July 1st, 2025, manufacturers must:

• Update Product Labels: Ensure all new products include the required IFT Seal, Homologation Certificate number, and prefix “IFT” in capital letters, following the new design guidelines.
• Check Existing Certifications: Verify whether your current products qualify for exemption or if you need to start the homologation process under the new guidelines.
• Review Documentation: Keep all homologation documentation up to date to ensure smooth certification processes moving forward.

 

South Korea韩国

韩国环境部宣布修订《电气电子设备和车辆资源循环法实施细则》

此次修订的产品组调整方式与《电气电子设备及车辆资源流通法施行令》附录5产品组调整相同，扩大了电子产品收集、转移、处置的强制对象。

征求意见的最终日期：2024 年 11 月 4 日。

South Korea released Notice of Legislation on Partial Amendment to the Enforcement Decree of the Act on Resource Recycling of Electrical and Electronic Products and Automobiles

Ministry of Environment announces amendment of Enforcement regulation of the Act on Resource Circulation of Electrical and Electronic equipment and Vehicles.

The product group was adjusted in the same way as the product group adjustment in Appendix 5 of the Enforcement Decree of the Act on Resource Circulation of Electrical and Electronic equipment and Vehicles, and the expansion of the mandatory target of electronic product collection, transfer, and recycling and the realization of recycling methods and standards according to the development of recycling technology.

Final date for comments: November 04, 2024.

 

Chinese Taiwan 中国台湾

BSMI 预计于2026年7月1日起新增7项 充电式商品

经济部标准检验局于2024年9月24日召开「增修订充电式电捕昆虫器等7项商品纳入应施检验范围」说明会，预计于2026年7月1日起新增7项 充电式商品。

BSMI held a briefing on “Added and revised 7 products such as rechargeable electric insect traps to be included in the scope of inspection” on September 24, 2026. It is expected that 7 new rechargeable products will be added into mandatory product scope from July 1, 2026.

 

 

RoHS

South Korea韩国

韩国环境部宣布修订《电气电子设备和车辆资源循环法实施令》。

此次修订扩大了有害物质限制使用的项目范围，对目前49种产品以外的所有电气电子产品强制限制有害物质的使用 (不包括工业设备和运输等例外)。

征求意见的最终日期：2024 年 11 月 4 日。

South Korea released Notice of Legislation on Partial Amendment to the Enforcement Decree of the Act on Resource Recycling of Electrical and Electronic Products and Automobiles.

Ministry of Environment announces amendment of Enforcement decree of the Act on Resource Circulation of Electrical and Electronic equipment and Vehicles.

This amendment expands the scope of items subject to restrictions on the use of hazardous substances, thereby considering the impact on the human body and the environment by limiting the content of hazardous substances in electrical and electronic products, facilitating recycling, and actively responding to international standards in domestic laws by reflecting the recent revisions to the EU RoHS II Directive.

Regulatory content: Expansion of all products subject to restrictions on the use of hazardous substances

– Imposing mandatory restrictions on the use of hazardous substances on all electrical and electronic products other than the current 49 products (excluding exceptions such as industrial equipment and transportation)

Final date for comments: November 04, 2024.

 

 

家用电器 House Appliances

Bahrain巴林

巴林提出电动洗衣机能效要求的公众咨询

[法规草案] 2024年10月24日，巴林王国BSMD向WTO提交了“电动洗衣机 – 能源性能、测试和标签要求”的公众咨询，管控洗衣能力不超过25kg的洗衣机，及洗烘一体机洗衣部分。

公众咨询截止通知后的60天,，建议2024年底通过，强制时间待定。

Bahrain BSMD submitted a draft regulation to WTO for consultation. This regulation specifies the Minimum Energy Performance Standard (MEPS) and testing requirements of electric clothes washing machines with capacity up to 25 kg, that operate in AC single-phase of 230V with a frequency of 50 Hz according to GSO 1899. Washing machines with additional function (dryer) are included in this regulation (this regulation covers washing function only).

Note: This regulation does not specify safety requirements, which are covered by GSO IEC 60335-2-11 or GSO IEC 60335-2-43

Proposed date of adoption: End of 2024

Proposed date of entry into force: To be determined

Final date for comments: 60 days from notification

 

Chile智利

智利发布第35号豁免决议，关于家用制冷器具能效标签的最终技术规范并建立相应的能效标签

2024年9月13号，智利能源部发布了第35号豁免决议，批准家用制冷器具能效标签的最终技术规范并建立相应的能效标签。该决议适用于家用冰箱、冷柜和冷藏冷冻箱等品类，不包括使用非压缩机制冷技术的设备、商业展示柜酒柜等特定产品。

On September 13, 2024, the Chilean Ministry of Energy issued Exemption Resolution No. 35, approving the final technical specifications for energy efficiency labels for household refrigeration appliances and establishing corresponding energy efficiency labels. The resolution applies to appliances such as household refrigerators, freezers and refrigerator-freezer combinations, and excludes specific products such as equipment using non-compressor refrigeration technology, commercial display cabinets and wine cabinets.

 

Egypt埃及

埃及发布通知附录，关于遵守管道式空调和多分体系统空调标准的过渡期

本附录涉及第 445 /2024 号部长法令的通知，该法令给予生产商和进口商六个月的过渡期，以遵守埃及标准 ES 5072「管道式空调和空气对空气热泵 — 测试和绩效评级」，以及遵守埃及标准 ES 8898「多分体系统空调和空气对空气热泵 —性能测试和评级」。

通过日期：2024 年 9 月 7 日

生效日期：2024 年 10 月 3 日

On 08 October 2024, Egypt released addendums concerning the notifications of the Ministerial Decree No.445 /2024 that gives the producers and importers a six-month transitional period to abide  by the Egyptian Standard ES 5072 for “ducted air-conditioners and air-to-airheat pumps —Testing and rating for performance” and to abide  by  the  Egyptian Standard ES 8898 for “Multiple split-system air conditionersand air-to-air heat pumps —Testing and rating for performance “.

Date of adoption: 7 September 2024

Date of entry into force: 3 October 2024​

 

India印度

BEE发布《2024年能源效率局 (冰箱标签显示详情及方式) (修订) 条例》草案

2024年9月20日，BEE发布《2024年能源效率局 (冰箱标签显示详情及方式) (修订) 条例》草案。该修正案草案在 2024 年 10 月 20 日之前接受公众意见。

On September 20, BEE released the DRAFT of《 Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Refrigerators), (Amendment) Regulations, 2024》

The draft amendments receive public comments till October 20, 2024.

标签样本 (Sample label):

 

Kuwait科威特

科威特PAI 已上线全新能效注册平台

科威特公共工业管理局 (PAI) 已采用以下 4 项新技术法规:

• KWS 1897:2023 旋转电机
• KWS 1898:2023 电动干衣机
• KWS 1899:2023 电动洗衣机
• KWS 1900:2023 冰箱、冰箱冰柜和冰柜

这些新技术法规原定于 2024 年 10 月 8 日生效, 官方将于近期发布过渡期政策。

TUV莱茵已经可以提供上述产品EER注册服务。

Public Authority for Industry (PAI) has adopted 4 new technical regulations as below:

KWS 1897:2023	Rotating electrical machines – Efficiency classes of AC operated motors.
KWS 1898:2023	Electric Clothes Driers – Energy performance requirements and labeling
KWS 1899:2023	Electric Clothes Washing Machines – Energy and water performance requirements and labeling
KWS 1900:2023	Refrigerators, refrigerators-freezers and freezers – energy performance, testing and labeling requirements

These new technical regulations were originally scheduled to take effect on 8^th of October 2024, and the official transition policy will be released in the near future.

TUV Rheinland already offers EER registration for the above products.

 

Thailand泰国

TISI发布家用洗衣机安全标准更新草案

[法规草案] 泰国TISI于10月4号发布家用洗衣机安全标准更新草案，计划引用至最新的IEC 60335-2-7:2024版本。同时厘清了ISO 10472-2工业用洗衣机及IEC 60335-2-122纯商用定义洗衣机不在该标准管控范围。该法规草案将在政府公报公布之日起180天后生效。

The Thai Industrial Standards Institute (TISI) has proposed to withdraw TIS 1463– 2556 (2013) Clothes Washing Machines for Household Use: Safety Requirements and replace it with TIS 60335 Part 2(7)–25XX(20XX). This addendum is to inform that this draft Ministerial Regulation mandates electric washing machines for household and similar use to conform to the Thai Industrial Standard TIS 60335 Part 2(7)–25XX(20XX) Household and Similar Electrical Appliances – Safety – Part 2-7: Particular Requirements for Washing Machines.

This revised standard applies to electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other three-phase appliances.

This draft Ministerial Regulation will come into force after 180 days following the date of its publication in the Government Gazette.

 

 

灯具 / LED Luminaiaries/LED

China中国

中国提出关于道路及隧道照明用LED灯具的能效等级、能效限定值及检测方法的标准草案

[法规草案] 中国向WTO提出标准草案，关于道路及隧道照明用LED灯具的能效等级、能效限定值及检测方法。该标准适用于额定电压不超过1000V的道路及隧道照明用LED灯具 (包括LED光源及其控制装置，不包括独立安装的相互连接的控制部件或其他与照明无关的功能附件)。

This document specifies the energy efficiency grades, energy efficiency limits, and testing methods for LED luminaires for road and tunnel lighting.

This document applies to LED luminaires for road and tunnel lighting with rated voltage not exceeding 1000V (including LED light source and its control device, excluding independently installed interconnected control components or other functional accessories that are not related to lighting).

 

India印度

BEE通知自2025年1月1日起，LED灯将强制实施二维码

印度 BEE 将能源标准和标签计划下的 LED 灯二维码强制实施日期确定为 2025 年 1 月 1 日。

India BEE established the implementation date as Jan-1 of 2025 for QR code implementation for LED lamp under energy standards and labelling program.

 

 

能源效率要求 Energy Efficiency Requirements

Australia澳大利亚

澳大利亚GEMS能效产品，家电灯具及周边产品法规标准更新

澳大利亚能源和气候变化部最近扩大和删除了一些产品类别，并更新了现行的产品法规 (标准)。

• 草案规划中: 同意提高适用于电视和电脑显示器的最低能源性能标准 (MEPS)，并引入数字电子广告牌显示器的能源效率要求
• 以下4类产品新2024法规已经发布:

o 市电卤素灯 – 将有效淘汰这种照明技术 (提高灯泡的能源效率并逐步淘汰白炽灯)

o 洗碗机

o 洗衣机

o 滚筒式干衣机

• 已经引用新2024法规: 商用制冷器具
• 扩充GEMS品类 (草案): 引入商用制冰机的最低能效标准
• 不再需要注册: 以下产品将不再受《2012 年温室气体和能源最低标准法》的监管:

o 机顶盒

o 荧光灯镇流器

o 超低压 (ELV) 灯的变压器和电子降压转换器

Australia Energy and Climate Change Ministers recently expanded and remove some product categories, and also updated current product regulations (standards).

• Ministers agreed to increase the Minimum Energy Performance Standards (MEPS) that apply to televisions and computer monitors and to introduce energy efficiency requirements for digital signage displays.
• Updated MEPS for the following products were published:
• mains voltage halogen lamps – which will effectively phase out this lighting technology (Improving the energy efficiency of light bulbs and phasing out incandescent lamps
• dishwashers
• washing machines
• rotary clothes dryers.
• Streamlining regulation for refrigerated cabinets
• Consultation open: introducing minimum energy performance standards for commercial ice-makers
• Three GEMS appliances no longer require registration: In a decision reached by Energy and Climate Change Ministers on Friday 19 July 2024, the following products will no longer be regulated under the Greenhouse and Energy Minimum Standards Act 2012:
• set top boxes
• ballasts for fluorescent lamps
• and transformers and electronic step-down converters for extra low voltage (ELV) lamps.

 

 

其他 / 多主题产品 Others / Products with Multiple Subjects

India印度

BEE通知并网太阳能逆变器制造商可根据自愿制度启动并网太阳能逆变器的星级标签计划

能源效率局 (BEE) 已于 2024 年 3 月 15 日根据附表 38 的自愿制度启动并网太阳能逆变器的星级标签计划。 MEPS 表的认可评级适用于 2024 年 3 月 15 日至 2025 年 12 月 31 日。

在线门户将于 2024 年 4 月 9 日开始运作。

BEE 于9月20日通知所有并网太阳能逆变器制造商都可以根据NISE的测试报告，根据附表38中提到的模型注册过程标准，在星计划中注册。

Bureau of Energy Efficiency (BEE) has launched the Star Labelling Program for Grid Connected Solar Inverter under the voluntary regime of schedule 38 on March 15 2024.  The endorsement rating for MEPS table is applicable from 15 March 2024 to 31 December 2025.

The online portal will be active w.e.f  April 9 ,2024.

On September 20, BEE inform that all manufacturers of Grid Connected Solar Inverter can register in the star program based on the test report from NISE per standard mentioned in schedule 38 for the model registration process.

 

 

Kuwait科威特

PAI通过科威特合格评定计划 (KUCAS) 实施 GCC 节水产品技术法规

公共工业管理局 (PAI) 已授权通过科威特合格评定计划 (KUCAS) 实施 GCC 节水产品技术法规。

2025 年 3 月 29 日当天或之后抵达科威特港口和边境的 GCC 节水技术法规涵盖范围内的商品货件应附有技术检验报告 (TIR)，以避免产品在抵达时需另外进行当地合规流程。

符合 G-Mark技术法规将成为 GCC 节水产品技术法规范围内所有产品申请 TIR 的基本要求。

Public Authority for Industry (PAI) has mandated the implementation of GCC Technical Regulation for Water-consumption Conservation Products through the Kuwait Conformity Assessment Scheme (KUCAS).

Shipments of products covered under the scope of GCC Technical Regulation for Water-consumption Conservation Products arriving at Kuwait ports and borders on or after March 29th 2025 should be accompanied by Technical Inspection Reports (TIR) to avoid local compliance process on arrival.

Conformity to G-Mark technical regulation is going to be an essential requirement for issuance of TIR for shipments of all products within the scope of GCC Technical Regulation for Water-consumption Conservation Products.

 

Chinese Taiwan 中国台湾

BSMI修正「应施检验电动机商品之相关检验规定」

经济部标准检验局修正「应施检验电动机商品之相关检验规定」, 修正应施检验低压三相感应电动机商品规定。

详情请参考此连结。

BSMI proposes to adopt the updated version of CNS 14400 “Low-voltage three-phase squirrel-cage high-efficiency induction motors (for general purpose)” as the new inspection standard. The conformity assessment procedures remain unchanged.

For more details, please refer to this link.

 

Chinese Taiwan 中国台湾

BSMI公告「电力转换系统实施自愿性产品验证相关规定」并自 2024年9月26日起生效

经济部标准检验局公告「电力转换系统实施自愿性产品验证相关规定」, 自 2024年9月26日起生效。

详情请参考此连结。

BSMI has published the stipulation of “Requirements of Implementing Voluntary Product Certification for Power Conversion System”. Stipulation has become effective since 26th, September 2024.

For more details, please refer to this link.

UAE 阿联酋

ECAS标志即将改版

UAE阿联酋于2024年9月16日发布第137号决议，将采用更新版的国家合格标志和能效环境标签。

自发布日起，将予以制造商和供货商下述过渡期以变更标签样式:

实施日期	过渡期	采取措施	备注说明
2025年3月15日	自发布日起6个月	通关进入阿联酋的产品必须采用新的标签设计。	制造商可以生产和供应带有旧标签的产品，前提是这些产品在 2025 年 3 月 15 日之前到达并进入阿联酋。但是制造商需要确保在 2025 年 9 月 15 日或之前这些单位已售罄或标签已更换为新设计。
2025年9月15日	自发布日起1年	通关进入阿联酋的产品且当地市场现有的产品必须采用新的标签设计。

改版标志众多，部份标志如下所示:

特别注意:

• 新的ECAS Compliant Mark不包含发证机构代码。
• 为避免各种不同产品所适用的最小尺寸要求的问题，尺寸没有特别限制。
• 基本要求清晰可见可辨识，必须维持官方公告的Compliant Mark颜色配置及符合相应比例。
• 其他更多使用规范仍需待官方公布，若有消息会尽快更新。

MoIAT announced Ministerial Resolution No. 137 of 2024 adopting the updated national conformity marks and performance labels on 16 September 2024.

Manufacturers and Suppliers are given a transition period to comply with the changes in accordance with the timetable mentioned below beginning from the date of the resolution’s publication:

Date	Duration	Action that will be taken or requirement in UAE	Remarks
15-March-2025	6 Months from the date of publication	Products trying to cross the border into the UAE must have the new label designs.	Manufacturers can still produce and supply products with the old labels provided that they reach and enter the UAE before 15-March-2025. However, manufacturers will need to make sure that those units are either sold out or the labels are replaced with the new design on or before 15-September-2025.
15-September-2025	1 Year from the date of publication	Products trying to cross the border into the UAE and products existing in the local market must have the new label designs.

There are many types of conformity marks after the update, some are shown as below:

Remarks:

• Notified Body’s Number is not including in a new ECAS Compliant Mark.
• The dimensions of the artworks will no longer be published or needed to avoid additional issues with regards to the minimum size applicable in varying products.
• Color configurations must be maintained, and proportions of the artwork must be followed accordingly.
• Further usage policy of Compliant Mark will be released by MoIAT soon. Update information will be provided accordingly.