2023年6月国际市场准入资讯更新
- Full 6 GHz band is allocated for Wi-Fi operation: 5925-7125GHz with following technical characteristics:
- Acess Points (AP) and Subordnate Devices (SD) can operate with a maximum EIRP of 30 dBm and a maximum EIRP spectral density of 5 dBm/MHz.
- Client Devices (CD)can operate with a maximum EIRP of 24 dBm and a maximum EIRP spectral density of -1 dBm/MHz.
- Out-of-band emissions should not exceed an EIRP of -27 dBm/MHz.
- The operation is restricted to inside buildings (indoor use) only.
- Access points, client devices and slave devices must use a “containment protocol” that allows multiple users to share the same spectrum.
- The operation of these devices is prohibited in vehicles (cars, trains, boats and planes). However, the operation of this equipment will be allowed in aircraft when they fly above 10,000 feet.
- The allocation has become effective since May 24th, 2023.
- ENACOM Homologation (RAMATEL registration) is mandatory for said devices.
- DC ISOLATOR:
- Increased scope from 32A to 50A (with 12 month application) due to size creep in the industry for these devices;
- Added note: An example of Power Conditioning Equipment (PCE) is an inverter
- Power supplies:
- Added note: point (b) above “to provide supply to separate luminaires” is not limited to household types
- Added note: Specific Electronic equipment includes: Information Technology, Audio Visual equipment and USB power supplies
- Type ‘AC’ RCDs limited– this change is in response to and in alignment with a change in the wiring rules to prohibit their installation.
- “Simple Portable luminaire” interpretation corrected to refer to the proper annex title
- Removal of three definitions:
- CRT type Televisions
- Projectors for photographic slide or moving film
- Sewing machine
- Multiple various date amendments, updating standards, removing dates of application already in effect etc.
- 2024年6月30日前，企业可自愿选择按新版标准或旧版标准申请认证。但自2024年7月1日起，企业必须按新版标准申请认证。
- 对于按照旧标准获得现有认证的企业，必须在2025年6月30日之前提交将证书转换为新认证的申请。
- 如果转换未在上述期限内完成，证书将被暂停。截至2025年9月30日，企业未完成转换的，将被撤销认证。
- Enterprises can voluntarily choose to apply for certification according to the new version or the old version of the standard until 30 June 2024. However, from 1 July 2024, enterprises must apply for the certification according to the new version of the standard.
- For enterprises who have obtained the existing certification according to the old standard, they must submit an application to convert the certificate into the new certification and this action must be conducted by 30 June 2025.
- If the conversion is not completed within the above time limit the certificate will be suspended. Certification will be revoked in the event that the enterprise has not completed the conversion by 30 September 2025.
- i) Radio equipment defined in Annex I of the Technical Regulations;
- ii) Radio equipment, which is used only for activities related to public safety, defence, etc
- The product will be operating on single or three phases with current requirement >=32A
OR - The product will be operating on 48VDC with current requirement >=100A
- Information of Voltage, Current, and Power should be mentioned in the BOM.
- The reports should be issued by labs located in non-border sharing nations.
- OEM will have to prepare and submit a self-declaration of conformity to technical parameters as per ER.
- A provisional certificate will be issued by TEC valid for 2 years.
- The certificate should be integrated with security requirements as per the guidelines for the same will be issued by TEC.
- 更新以下4个标准为新版本:
- 删除以下的2个旧的标准:
- Update below 4 standards as the new versions:
- Withdraw below 2 old standards
- New requirements have divided the certification into 2 types. Type 1 : Type approval & Type 2 : SDOC. Details wait for further notification.
- Validity from 1 – 3 years .
- Label, the requirements are labels must be purchase from MTC and affix on the product. But the process and the requirements are not yet concluded.
- NL IEC 62560:2022 Self-ballasted LED-lamps for general lighting services by voltage >50V – Safety specifications
- NL IEC 62612:2022 Self-ballasted LED lamps for general lighting services with supply voltages >50V – Performance requirements
- NL IEC 62776:2022 Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications
- NL IEC 61347-2-13:2022 Lamp control gear-Part 2-13: Particular requirements for DC or AC supplied electronic control gear for LED modules
- NL IEC 62384:2022 DC or AC supplied electronic control gear for LED modules. Performance requirements
- ovens that use energy sources other than electricity or gas,
- ovens which are equipped with microwave heating function,
- small ovens
- portable ovens
- heat storage ovens
- ovens which are heated with stam as a primary heating function;
- ovens designed for use only with propane and butane
- water heaters intended for the use of gaseous or liquid fuel, which are mainly produced from biomass;
- water heaters that use solid fuel;
- combined heaters, as specified;
- water heaters that do not meet the minimum load profile for the smallest specified energy index;
- water heaters intended only for hot drinks and/or to get food.
- The label is printed according to Annex 1;
- A printed version of the technical specification is provided;
- Any form of advertisement according to Annexes 4 and 5;
- The promotional materials must be displayed on the Internet and contain the energy efficiency grade in accordance with Annex 4;
- An electronic version of the energy label of each model of the electronic display is available;
- The technical specification in the electronic version is available;
- The label is affixed on the packaging of the product.
- Trade mark;
- Model type, if any;
- Identifier of the outdoor unit and identifier of the indoor unit of the model set by the manufacturer;
- Arranging the device according to its efficiency in energy use for the cooling system;
- Annual electricity consumption for the cooling system in kWh. This consumption is calculated on the basis of the results obtained for a period of 500 operating hours;
- The cooling capacity of the device;
- The level of efficacy in the use of EER;
- Device type according to the operating system (cooling only or cooling and heating);
- QR Code.
- Trade mark (brand);
- Model type, if any;
- Classification of the machine according to its energy efficiency, per the data provided for in Article 4 of the Decision;
- Annual electricity consumption in kWh, according to the measurement methods stipulated in Appendix 1 of this Decision;
- Water consumption according to the measurement methods stipulated in Appendix 2 of this Decision by calculating the liter per year;
- Loading capacity of the washing machine for the standard program “Cotton” at 60° C or at 40° C, in kilograms;
- Classification of the machine according to its efficiency in the era, according to the data specified in Chapter 4 of this Decision;
- Air noise emissions in decibels (Db) and supplemented with the nearest integer, during the washing and spinning stages for the unified program “Cotton” at 60° Celsius with a full load, if the factory conducted testing and met the National Agency for Control In Energy parameters;
- QR Code.
- Trade mark (brand);
- Model type, if any;
- Classification of the machine according to its energy efficiency, in accordance with the provisions of Articles 3 and 4 of the Decision;
- Annual electricity consumption in kWh, according to the measurement methods stipulated in Article 7;
- Sum of the sizes used for all sections “without a star”, which is determined according to the measurement methods provided for in Article 7 and expressed in liters;
- Sum of the sizes used for all frozen foodstuff storage sections arranged at least as a “star”, which is determined according to methods the measure provided for in Article 7 and expressed in liters;
- Number of stars for the frozen food storage section, which is determined according to the measurement methods stipulated in Article 7. If the aforementioned section is “without a star”, this corner is left white;
- QR Code.
- In field 11, information about the last name, first name, patronymic (if any) of the expert who signed it (expert auditor) who signed the TSA act.
- In field 12, information on the distribution of the certificate for mass-produced products manufactured from the date of manufacture of selected samples (samples) of products that have passed examinations (tests) and measurements, indicating information on the date of manufacture of such samples (samples) of products (if any),
- In field 12, information about the contract with the manufacturer (including with a foreign manufacturer), which provides for ensuring compliance of products supplied to the customs territory of the Union with the requirements of the technical regulation (technical regulations) and liability for non-compliance of such products with the specified requirements (for persons authorized by manufacturers).
- Information on the extension of the declaration to mass-produced products manufactured from the date of manufacture of selected samples (samples) of products that have passed examinations (tests) and measurements, indicating information on the date of manufacture of such samples (samples) of products (if any)
- Information about the contract with the manufacturer (including with a foreign manufacturer).
- Low – Voltage switchgear and controlgear: Circuit -Breakers
- Low – Voltage switchgear and controlgear: switches, disconnectors, switch disconnectors and fuse -Combination units
- Low – Voltage switchgear and controlgear: electromechanical contactors and motor -Starters
- Low – Voltage switchgear and controlgear: a.c semiconductor motor controllers and starters
- Low – Voltage switchgear and controlgear: a.c. semiconductor motor controllers and contactors for non – Motor loads
- Low – Voltage switchgear and controlgear: electromechanical control circuit devices
- Low – Voltage switchgear and controlgear proximity switches
- Low – Voltage switchgear and controlgear: electrical emergency stop devices with mechanical latching function.
- 草案预计将洗碗机和移动空调纳入效率管理评级体系目标并扩大烘干衣机的管控范围;
- 草案预计将降低待机功率和高效能认证的计算机、多功能设备(例如:复印机、打印机、扫描机)、LED灯管、水泵转入效率管理评级体系(MEPS)
- 草案预计将空气净化器、电饮水冷/暖器、除湿机、机顶盒等现有效率管理设备的能效标准要求加强。
- The draft adds dishwashers and portable air conditioners to targets for the energy efficiency rating system. The coverage of these product categories is –
- Household dishwashers with a cleaning capacity of 20 people or less;
- Portable air conditioners and portable heat pumps with a rated cooling capacity of less than 23 kW.
- The amendments transfer computers, multifunction devices, tube-type LED lamps, and pumps that are/were subject to standby power reduction and high-efficiency certification to the energy efficiency rating system as follows:
- Products to be transferred from the standby power reduction program to the energy efficiency rating system are –
- Computers including desktop computers, monitor-integrated all-in-one desktop computers, laptops;
- Multifunction devices including multifunctional image output devices with other functions, such as copiers, printers, and scanners;
- Products to be transferred from the high-efficiency certification system to the energy efficiency rating system are –
- Convertor external tube type LED lamps with lamp power of 22 W or less and using G13 caps and D12 caps;
- Pumps for water supply (WA), ground motor detachable type (G2), double suction type centrifugal pump(C5) etc.
- Energy efficiency standards for air purifiers, electric drinking water coolers/heaters, dehumidifiers, and set-top boxes, which are existing efficiency management equipment, would be strengthened as follows:
- Air purifiers –
- Changing MEPS maximum power consumption requirement from 2.50 W/m2 to 2.38 W/m2;
- Expanding product coverage to those with DC power or network functions;
- Electric water coolers/heaters –
- Changing “instantaneous coolers/heaters” from the efficiency rating labelling targets to MEPS compliance targets;
- Changing MEPS maximum power consumption requirement from 2.50 kWh to 2.38 kWh for storage-type products and 0.77 kWh for instantaneous-type products;
- Dehumidifiers –
- Changing MEPS requirement from 1.00 to 1.40;
- Changing labelling item “measured dehumidification capacity” to “dehumidification amount per day”;
- Set-top boxes: Strengthening MEPS for additional devices, etc.
 |
 |
资讯 / 电信 ITE / Telecom
Argentina阿根廷
2023 年 5 月 24 日，阿根廷ENACOM 发布了第 756/2023 号决议，正式分配 6GHz (5925-7125 GHz) 频段并定义 Wi-Fi 无线接入系统使用的技术规范。ENACOM 认证 (RAMATEL 注册) 是强制性的，该分配自2023年5月24日起生效。
Wi-Fi 6GHz (5925-7125 GHz) band is allocated for use in Argentina
On May 24th, 2023 ENACOM has published Resolution 756/2023 to formally allocate the 6GHz (5925-7125 GHz) band and to define the technical specifications for the use of Wi-Fi wireless access systems.
The keypoints for this resolution are as follows:
Please find the official spanish version of this announcement.
澳大利亚 Australia
新南威尔士州公平贸易署NSW于2023年4月28日发布新的公告，对管控范围内的电子电器产品相关定义，标准版本及其应用日期等进行多项更新和修正。
Updated declared article list in the NSW Gazette – Order under section 12: 28 April 2023
NSW declared article list published today 28 April 2023.
Summary of changes to the current Declared Electrical Article order (previous Dated : 23/09/2021)
China 中国
GB 17625.1-2022标准已于2022年12月29日发布，将于2024年7月1日起实施并替代GB 17625.1-2012。各认证机构已相继发布了关于按照GB 17625.1-2022实施电子电气设备及类似设备认证工作的通知。 以下实施要求适用于修订后的标准：
GB 17625.1-2022 has been published on Dec 29, 2022. It will replace GB 17625.1-2012 and will come to force on July 1, 2024. Certification bodies have published notifications regarding the implementation of certification of electronic and electrical equipment and similar equipment in accordance with GB 17625.1-2022.
The following implementation requirements apply regarding the revised standard:
The Annex specifies the technical resolution on the implementation of the GB 17625.1-2022 and provides the list of amendments to testing requirements.
Georgia 格鲁吉亚
2023 年 4 月 25 日，格鲁吉亚政府发布了一项决议，批准无线电设备技术法规。制造商有义务在无线电设备投放市场之前在无线电设备上贴上产品类型、批号或序列号或其他识别标记。该决议于 2024 年 12 月 1 日生效，但第 3、6 和 7 条于 2023 年 4 月 25 日生效。
On 25 April 2023, the Government of Georgia published a Resolution to approve the Technical Regulation on Radio Equipment.
The requirements of this technical regulation do not apply to the following radio devices:
Radio equipment must be designed:
1) In such a way as to protect the life and health of people and domestic animals, as well as to protect property, including safety requirements stipulated by the technical regulations for electrical equipment operating within certain voltage limits;
2) To provide an appropriate level of electromagnetic compatibility;
3) As to effectively use and facilitate the use of the radio frequency spectrum, in order to avoid harmful effects;
The manufacturer is obliged to put the product type, batch or serial numbers or other identification marks on the radio equipment before placing it on the market. If this is not possible due to the size of the radio equipment or the type of product, the necessary information should be included on its packaging or in the accompanying documentation.
The manufacturer is obliged to indicate his name, registered trade name or registered trademark and address on the radio device, and if this is not possible, on its packaging or in the accompanying documentation, indicating a specific place where it is possible to contact the manufacturer. Contact data must be in Georgian.
The manufacturer is obliged to attach instructions and safety information to the radio equipment. Safety instructions and information related to the safe use of the product must be attached in Georgian.
This Resolution enters into force on 1 December 2024, however, articles 3, 6 and 7 entered into force on 25 April 2023.
India印度
考虑到高电流产品测试要求的局限性，TEC 已宣布接受 ILAC 认可实验室针对路由器、LAN 交换机和 DWDM 产品的安全和 EMI/EMC 参数出具的测试报告。具体参考英文内容。
Considering the limitations w.r.t high current product’s testing requirements, TEC has announced the acceptance of test reports issued by ILAC accredited labs for Safety and EMI/EMC parameters for Routers, LAN Switches, and DWDM products if:
It should be noted that:
India印度
2023/04/26 Meity 公告将Television sets with IS 18122:2022 纳入第64项产品目录的CRS scheme。
该产品自公报发布日起两年后 (即2025/4/26) 须符合以下相应印度标准:
| S. No | Goods or Articles | Indian Standard | Title of Indian Standard |
| 64 | Television Sets | IS 18112:2022 | Digital Television Receiver for Satellite
Broadcast Transmission —Specification |
The Indian Ministry of Electronics and Information Technology published an amendments to the “Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021” on April 26, 2023.
| S. No | Goods or Articles | Indian Standard | Title of Indian Standard |
| 64 | Television Sets | IS 18112:2022 | Digital Television Receiver for Satellite
Broadcast Transmission —Specification |
From 26 April 2025, television sets must comply with Indian Standard IS 18112:2022.
Indonesia印度尼西亚
2023年4月，印度尼西亚通信和信息技术部发布了一项新的法规 (NOMOR 2 TAHUN 2023)，该法规涉及到在类别权限下的无线电频谱的使用，目的是优化无线电频谱的利用，并允许根据类别权限进行额外分配。
The Direktorat Jenderal Sumber Daya dan Perangkat Pos dan Informatika (SDPPI) of Indonesia has published PERMEN KOMINFO Nomor 2 Tahun 2023 “On Use of Radio Frequency Spectrum Based on Class Permission” on April 12, 2023. This regulation outlines radio frequency spectrum use for class permits and includes updated frequency bands for devices such as Private Mobile Radios (PMR), SRDs, RLAN devices, and LPWAN devices.
Iraq伊拉克
伊拉克通信和媒体委员会 (CMC) 发布了伊拉克电信行业监管最新法规。主要变化如系列型号等内容参考英文内容。
Iraq Communications and Media Commission (CMC) issued a recent development in the regulatory landscape of Iraq’s telecommunications industry.
Below are the main changes included in this regulation:
– A new type of type approval certificate is issued called a “family certificate“. This certificate is designed to cover several models of equipment that have the same technical specifications but differ in their model names.
– The type approval certificate is granted to any telecommunications equipment (wireless devices and wired devices) according to the type of device shown and conditions stipulated in this regulation.
This means that manufacturers and importers of telecommunications equipment must comply with the requirements set out in the regulation in order to obtain the necessary type approval certificate.
日本 Japan
电安法最新修正案
2023年5月1日，经济产业省公布了对《关于确定电气用品技术标准的部令的解释》的部分修订内容。
本次修订对附表12作出如下改变：
J60974-5(2023）
J61084-1(2023)
J61084-2-1(2023)
J62368-1(2023)
旧版本有效期：至2026年4月30日
J60335-2-29(H27)
J60335-2-96(H28)
Japan – DENAN (PSE mark) – Latest revision
It was announced by METI that parts of “About Interpretation of Ministerial Ordinance for Establishing Technical Requirements for Electrical Appliances and Materials” were revised on May 1, 2023.
In this revision, Appendix 12 was revised as below:
J60974-5(2023）
J61084-1(2023)
J61084-2-1(2023)
J62368-1(2023)
Transition Period for old standards: until April 30, 2026
J60335-2-29(H27)
J60335-2-96(H28)
Laos 老挝
2022年底，老挝技术和通信部(MTC)发布了第3583号关于电信和信息通信技术设备管理的通知，以取代第2118/PTS号MPT要求通知以及SRD的2117/MPT等相关规定，目前宣布从2023年5月开始执行，包括如认证类型分为2种，证书有效期，购买铭牌等, 具体细节待更新。
On 13th Dec 2022 , Laos’ Ministry of Technology and Communications ( MTC ) issued Circular No 3583 on Management of Telecommunications and ICT Equipment’s This is to replace the previous MPT requirements Notice No. 2118/PTS, dated August 8, 2018, and related regulations like .2117/MPT for SRD .
Singapore 新加坡
新加坡IMDA在5月12日宣布，将5925-6425MHz分配给WiFi 6E，并在第三季度开始商用。
The Infocomm Media Development Authority (IMDA) in Singapore announced on May 12, 2023, that 500 MHz of radio frequency spectrum in the 6 GHz frequency band (5925-6425 MHz) will be allocated to facilitate advanced Wi-Fi connectivity in Singapore. This additional spectrum will allow for greater digital innovation and the deployment of Wi-Fi 6E technology. IMDA anticipates that Wi-Fi 6E devices will be available commercially in Singapore by Q3 2023.
灯具 / LED Luminaiaries/LED
Lebanon黎巴嫩
黎巴嫩工业部发布LED灯具的强制性标准。 在当地市场上出售的所有 LED 灯都必须符合黎巴嫩标准中规定的要求。
本决定自 2023 年 2 月 16 日发布之日起生效。
This Decision issued by the Lebanese Ministry of Industry lists the mandatory standards for LED lamps. All LED lamps offered for sale in the local market must comply with the requirements specified in the Lebanese Standards listed below:
This Decision entered into force upon publication on 16 February 2023.
能源效率要求 Energy Efficiency Requirements
Georgia格鲁吉亚
2023 年 4 月 26 日，格鲁吉亚政府通过了第 162 号决议，批准了《家用厨房烤箱和抽油烟机能源标签规则技术法规》。 技术法规 (“TR”) 主要以委员会授权法规 (EU) No 65/2014 为蓝本。 TR 规定了标签要求，并提供标准和附加产品信息。 适用于家用燃气或电动厨房烤箱 (包括与厨房炉灶结合的厨房烤箱) 和家用电动抽油烟机 (抽油烟机)。
根据决议第 2 条，技术法规的遵守也可以通过遵守第 50/2013 号决议附件中所列国家的合规要求来证明。 其中包括欧盟成员国、英国、美国、澳大利亚和新西兰。
该决议将于 2025 年 1 月 1 日生效。
On 26 April 2023, the Government of Georgia adopted Resolution No. 162, approving the Technical Regulations on Energy Labelling Rules of Household Kitchen Ovens and Hoods.
The Technical Regulation (the “TR”) is largely modelled on Commission Delegated Regulation (EU) No 65/2014.
The TR sets out requirements for labelling, as well as providing standard and additional product information. It applies to household gas or electric kitchen ovens (including kitchen ovens incorporated in kitchen stoves) and household electric range hoods (extractors).
The TR does not apply to:
As per Article 2 of the Resolution, the compliance with the Technical Regulation can also be demonstrated by complying with requirements for compliance in those countries which are listed in the Annex of Resolution No. 50/2013. This includes, among others, EU Member States, UK, USA, Australia and New Zealand.
This Resolution will enter into force on 1 January 2025.
Georgia格鲁吉亚
2023 年 4 月 28 日，格鲁吉亚政府发布了一项关于批准热水器、热水储罐和热水器，以及太阳能电池板套件能源标签程序的决议。这些要求适用于标称热容量等于 70 kW 的热水器、存储容量≤ 500 升的热水储罐以及标称热容量≤ 70 kW 的热水器和太阳能电池板组。
该决议将于 2025 年 1 月 1 日生效。
On 28 April 2023, the Government of Georgia published a Resolution on the Approval of the Procedure for Energy Labeling of Water Heaters, Hot Water Storage Tanks and Water Heaters and Solar Panel Kits.
On the basis of Article 56, Part 1 and Article 58, Part 2 of the Product Safety and Free Circulation Code and the Law of Georgia “On Energy Labeling”, the procedure for energy labeling of water heaters, hot water storage tanks and water heaters and solar panel kits has been approved. The Technical Regulations sets out requirements for labelling, as well as providing standard and additional product information.
These requirements apply to water heaters with a nominal heat capacity equal to 70 kW, hot water storage tanks with a storage capacity ≤ 500 liters and water heaters and sets of solar panels with a nominal heat capacity ≤ 70 kW.
The Technical Regulation does not apply to:
This Resolution will enter into force on 1 January 2025.
India印度
印度能源局已将洗衣机的星级标签表有效期延长六个月, 即至 2023 年 12 月 31 日。所有希望根据当前评级标签继续在其产品上使用星级标签的制造商可在2023年6 月 30 日之前提交型号延续申请, 逾期不再受理机型延续申请。 更新后的星级评分表有效期为2019年3月8日至2023年12月31日。
BEE has extended the star labeling table validity for Washing Machine by six months i.e. up to December 31, 2023. All manufacturers who wish to continue star labeling on their product as per the current rating label may submit an application for model continuation before June 30, 2023. No application for model continuation is accepted after the specified date. The updated star rating table validity is from March 8, 2019, to December 31, 2023.
Montenegro黑山共和国
2023 年 4 月 11 日，黑山经济部发布了关于建立电子显示器能效标签要求的条例。 该法规适用于电子显示器，包括电视、显示器和电子签名显示器。 该法规于 2023 年 4 月 19 日生效，并废除了现有的关于电视机能效标签的法规，供货商或经销商必须在 2024 年 7 月 1 日之前根据本条例的规定对电子显示器进行标记。
On 11 April 2023, the Montenegrin Ministry of Economy published a regulation on the establishment of energy efficiency labelling requirements for electronic displays.
The regulation applies to electronic displays including televisions, monitors and digital sign displays. Article 3 provides the exempted products in this regulation.
Article 9 requires that the supplier who places the electronic display on the market must ensure the following:
In accordance with Article 15, suppliers or distributors are required to mark the electronic displays according to the provisions of this regulation by 1 July 2024.
The regulation entered into force on 19 April 2023 and repeals the existing regulation on energy efficiency labelling of televisions.
Tunisia突尼斯
2023 年 4 月 7 日，突尼斯工业部和贸易部发布了一项部长决定，为电烤箱制造商和进口商制定规则和要求。 电烤箱在突尼斯上市之前，必须按照规定进行能效测试。
家用电烤箱只有在提供根据突尼斯标准NT 81.239-1 (相当于国际标准IEC 60350-1或欧洲标准EN 60350-1) 设定的测量方法建立的标签的情况下，才能在市场上出售或出租。
该决定将于2023年7月7日生效。
On 07 April 2023, the Tunisian Ministry of Industry and the Ministry of Trade published a Ministerial Decision to establish the rules and requirements for manufacturers and importers of electric ovens.
Before electric ovens can be marketed in Tunisia, they must undergo energy efficiency tests, in accordance with the regulations.
Energy efficiency classes of domestic cooking appliances according to the energy efficiency indicators are specified in Table “A” of this Decision.
In addition, if information on acoustic emissions (noise level in DB) is displayed, the ovens must also be subjected to an acoustic emission test by a laboratory authorized for this purpose.
The manufacturer or importer must also redo the tests if changes are made to the model of the appliance that could affect its energy efficiency or its acoustic emissions. These tests must be carried out in accordance with the same procedures, and the manufacturer must revise its classification according to the indices established by the Decision. This data must be updated at least once every two years or whenever changes are made to the model of the device.
Electric ovens for domestic use may only be sold or rented on the market if they are provided with a label established in accordance with the measurement methods set by the Tunisian standard NT 81.239-1 equivalent to the international standard IEC 60350-1 or European standard EN 60350-1. Electric ovens must also be furnished with the specified technical documentation.
This Decision will enter into force on 07 July 2023, which is three months from its publication in the Official Gazette of the Republic of Tunisia.
Tunisia突尼斯
2023 年 4 月 7 日，突尼斯工业部和贸易部发布了一项部长决定，为额定制冷量不超过 12 kW 的空调制造商和进口商制定规则和要求。 新增的第7条规定，在将有关设备的型号投放市场之前，制造商或进口商必须向ANME (国家能源管理机构) 发送实验室进行的测试报告的副本， 标签和信息表的副本。 数据必须记录在该机构设置的电子平台中，并且至少每两年或在设备型号发生变化时更新。 当此信息与测试报告中记录的结果一致时，该机构将批准将设备型号投放市场。 该决定于 2023 年 4 月 7 日生效。
On 07 April 2023, the Tunisian Ministry of Industry and the Ministry of Trade published a Ministerial Decision to establish the rules and requirements for manufacturers and importers of air conditioners with a rated cooling capacity up to 12 kW.
The newly added article 7 stipulates that before placing the model of the device concerned on the market, the manufacturer or importer is required to send the ANME (National Agency for Energy Management) a copy of the reports of the tests carried out by the laboratory, a copy of the label and the information sheet.
Information shown on the label shall include:
The data must be recorded in the electronic platform set up by the agency and updated at least once every two years or each time changes are made to the device model.
The Agency will grant approvals for placing the device model on the market when this information is consistent with the results recorded in the test reports.
Ministerial Decision entered into force on 7 April 2023.
Tunisia突尼斯
2023 年 4 月 28 日，突尼斯能源部、工业和贸易部发布了一项部长决定，其中规定，每个自动洗衣机制造商或供货商都必须向 ANME (国家能源管理局) 发送实验室进行的测试报告副本、标签副本和信息表，然后再将相关设备的型号投放市场。
数据必须记录在机构设立的电子平台中，并至少每两年更新一次，或在设备型号发生变化时更新。
该部长级决定于2023年4月28日生效。
On 28 April 2023, the Tunisian Ministries of Energy, and Industry and Trade, published a Ministerial Decision which stipulates that every manufacturer or supplier of automatic washing machines is required to send the ANME (National Agency for Energy Management) a copy of the reports of the tests carried out by the laboratory, a copy of the label and the information sheet before placing the model of the device concerned on the market.
This joint Decision, amends the Decision of the Minister of Industry, Small and Medium Enterprises and the Minister of Trade dated 24 July 2019, related to the energy indication of automatic washing machines.
Information shown on the label shall include:
The data must be recorded in the electronic platform set up by the agency and updated at least once every two years or each time changes are made to the device model.
This Ministerial Decision entered into force on 28 April 2023.
Tunisia突尼斯
2023年4月28日，突尼斯工业部和贸易部联合发布了一项部长决定，修订关于家用电器能源标签要求的规定，以便为冰箱、冰柜和组合冰箱/冰柜的制造商和进口商制定报告规则和标签要求。
在将有关设备的型号投放市场之前，制造商或进口商必须向国家能源管理局发送实验室进行的测试报告的副本，以及标签和信息表的副本。数据必须记录在机构设立的电子平台中，并至少每两年更新一次，或在设备型号发生变化时更新。
该部长级决定于2023年4月28日生效。
On 28 April 2023, the Tunisian Ministry of Industry and the Ministry of Trade jointly published a Ministerial Decision which amends the Decision of 10 September 2004 on energy labelling requirements for household electrical appliances in order to establish reporting rules and labelling requirements for manufacturers and importers of refrigerators, freezers and combined refrigerators/freezers.
The provisions of Article 6 are replaced by the following: before placing the model of the device concerned on the market, the manufacturer or importer is required to send to the National Agency for Energy Management a copy of the reports of the tests carried out by the laboratory, along with a copy of the label and the information sheet as per Articles 8 and 9 of the 2004 Decision. They are also required to register the data in the electronic platform created by the Agency and update it at least every two years or whenever changes to the model are made.
The Annex is also amended with a new energy efficiency label. Information shown on the label shall include:
This Ministerial Decision entered into force on 28 April 2023.
Bahrian巴林
世贸组织通报了最新的巴林小型空调能效法规，该法规将在批准和公布后取代现行法规。
正式实施日期尚未公布。 更多细节将在稍后发布。
WTO notified the latest Bahrain energy efficiency regulation for small Air Condiitioner, which will replace the current one after approval and publication.
Official implement date is not announced yet. More details will be released at a later time.
其他 / 多主题产品 Others / Products with Multiple Subjects
EAEU 欧亚经济联盟
2023 年 4 月 6 日，欧亚经济委员会发布第 46 号决定，自2023年5月6日起，符合性证书与符合性声明必须列上专家审核员、样品生产日期、与制造商的合同、 产品的储存与使用寿命 (保质期) 等相关讯息，具体要求可参考英文内容。
On 6 April 2023 Eurasian Economic Commission published Decision No. 46 amending the ECC’s Decision No. 127, 2017 establishing the procedure for the formation and maintenance of a single register of certificates of conformity and registered declarations of compliance.
Thus, from 05/06/2023, the changes made to the decision of the EEC Board dated 12/25/2012 No. 293 “On uniform forms of a certificate of conformity and a declaration of compliance with the requirements of the technical regulations of the Eurasian Economic Union and the rules for their execution” took effect.
From 05/06/2023, the certification body will have to enter the following information into the certificates of conformity (serial):
From 05/06/2023, , the certification body will have to enter in the declaration of conformity (serial) the following information:
In addition, from the date of entry into force of Decision No. 46 of April 4, 2023 (from May 6, 2023), certain provisions of the Decision of the Board of the Eurasian Economic Commission of December 20, 2022 N 199 “On Amendments to the Decision of the Customs Union Commission of June 18, 2010” come into force No. 319″.
Position 12 in the new version of the certificate of conformity: “Conditions and terms of storage of products, service life (shelf life) and (or) resource of products (in cases established by regulatory legal acts, for compliance with the requirements of which certification was carried out, provided for by the Unified List), other information about products , providing its identification (if any).
Previously, there was the wording “if necessary”.
Position 6 in the Declaration of Conformity in the new edition “Conditions and terms of storage, service life (shelf life) and (or) resource of products (in cases established by regulatory legal acts, compliance with the requirements of which is confirmed by a declaration of conformity provided for by the Unified List), other information about products , providing its identification (if any)”
From the date of entry into force of Decision No. 46 of 04/04/2023 (from 05/06/2023), certain provisions of the decision of the EEC Board of 20.12 come into force. 2022 No. 200 “On Amendments to the Procedure for Registration, Suspension, Renewal and Termination of Declarations of Conformity of Products with the Requirements of the Technical Regulations of the Eurasian Economic Union”
An application for registration of a DoC must contain the following information:
“conditions and shelf life of products (in cases provided for by technical regulations, regulatory documents, standardization documents and technical documentation of the manufacturer);
service life (shelf life) or resource of products (in cases provided for by technical regulations, regulatory documents, standardization documents and technical documentation of the manufacturer).
EAEU 欧亚经济联盟
2023 年 4 月 6 日，欧亚经济委员会发布第 46 号决定，修订 ECC 2017 年第 127 号决定，确定建立和维护单一合格证书和已注册合规声明登记册的程序。该决定通过消除提供纸质文件副本的需要来简化维护合格证书和已注册合规声明单一登记的程序。 因此，该决定承认电子文件具有相同的法律效力，并提供了以电子方式颁发合格评定证书的可能性。
On 6 April 2023 Eurasian Economic Commission published Decision No. 46 amending the ECC’s Decision No. 127, 2017 establishing the procedure for the formation and maintenance of a single register of certificates of conformity and registered declarations of compliance.
The Decision establishes rules for the transition to electronic conformity assessment documents in the single register with the objective of preventing the falsification of documents and reducing the red tape associated with the production of paper-based certificates or registered declarations of conformity.
The Decision simplifies the procedure for maintaining the single register of certificates of conformity and registered declarations of compliance by eliminating the need to provide paper-based duplicates of documents. As such, the Decision recognizes the same legal effect to electronic documents and provides for the possibility to issue conformity assessment certificates electronically.
The Decision comes into force on 6 May 2023 with the exception of paragraphs 20 and 21 subparagraph “a” of paragraph 3 of the amendments (annex to this Decision), which comes into force from the date of entry into force of the new version of the general process “Formation and maintaining unified registers of issued or accepted documents on conformity assessment with the requirements of the technical regulations of the Eurasian Economic Union (technical regulations of the Customs Union)” in the part related to the unified register of issued certificates of conformity and registered declarations of conformity.
India印度
印度标准局下的重工业部原本将“低压开关装置和控制装置”纳入Scheme-II强制注册，但由于各种困难导致时间表不断延期后，在多方考虑和磋商后，公告《电气设备 (质量控制) 修正案, 2023》将纳入 BIS 的方案Scheme-X
1.低压开关设备和控制设备：断路器
2.低压开关设备和控制设备：开关、隔离开关、隔离开关和熔断器-组合装置
3.低压开关设备和控制设备：机电接触器和电动机-起动器
4.低压开关设备和控制设备：交流半导体电机控制器和启动器
5.低压开关设备和控制设备：交流非电机负载的半导体电机控制器和接触器
6.低压开关设备和控制设备：机电控制电路装置
7.低压开关设备和控制设备接近开关
8.低压开关设备和控制设备：具有机械闭锁功能的电气紧急停止装置
断路器认证 (序列号 1) 将根据类别和电气额定值分阶段发布，对于其余产品，认证将在通知发布一年后生效 (即 2024 年 5 月 10 日) 。
Ministry of Heavy Industries under Bureau of Indian standards made “Low Voltage Switch gears and Control gears” mandatory and the timeline for certification was keep extending due to the concerns raised by the manufacturers and the stake holders. After prolonged consultation with stakeholders on the various bottlenecks raised by manufacturers, it was emerged out that the timely implementation of the EEQCO is not feasible under Scheme-II and hence the certification of these below listed products will be implemented under Scheme X of BIS.
Circuit breakers certification (serial No.1) will be released in a Phase wise manner depending upon the category and the electrical ratings and for the rest of the products the certification will come into effect after one year of the notification published. (i.e. May 10, 2024)
South Korea韩国
[法规草案] 2023 年 5 月 11 日，韩国贸易、工业和能源部 (MOTIE) 发布了《效率管理设备操作规范》的修订草案。 该草案扩大了效率管理评级体系(MEPS)下的目标，并加强了某些产品类别的能效标准。 具体变化如下：
这些产品的拟议修订生效日期分别为 2024 年 1 月 1 日与2024 年 7 月 1 日，在 2023 年 7 月 10 日之前，可以通过电子邮件提交有关该修正案草案的意见。
On 11 May 2023, the South Korean Ministry of Trade, Industry and Energy (MOTIE) issued a draft amendment to the Regulations on Efficiency management equipment operation regulations.
The draft expands targets under the energy efficiency management system and strengthens energy efficiency standards for certain product categories. The specific changes are as follows:
Also, the proposal expands the scope of application of clothes dryers, which are currently subject to efficiency rating labelling, from “standard drying capacity of 20kg or less” to “household rotary clothes dryers with a standard drying capacity of 25kg or less”.
The proposed effective date of revisions for the Household dishwashers, Portable air conditioners and portable heat pumps are 1 July 2024, clothes dryers is 1 January 2024.
Revisions to these products are scheduled to take effect on 1 July 2024.
The proposed effective date of revisions to these products is 1 January 2024.
Opinions on this draft amendment may be submitted via email to 40yypark@korea.kr until 10 July 2023.
推荐文章
关注我们
4001183833 / 8009993668
Service-gc@tuv.com
www.tuv.com
德国莱茵TÜV是一家国际领先的技术服务供应商。在全球近60个国家和地区设有500多个分支机构，拥有超过20,000名员工，服务涵盖工业服务与信息安全，交通服务，产品服务，管理体系服务和莱茵学院与生命关怀。自1872年成立以来，我们一直为解决人类、环境和科技互动过程中出现的挑战，提供安全的、可持续的解决方案。作为一个独立、公正和专业的机构，我们长期致力于营造一个同时符合人类和环境需要的美好未来。
热门分享
