2021年8月国际市场准入资讯更新



2021年8月5日 | 市场准入

 

 

资讯 / 电信 ITE / Telecom

Afghanistan 阿富汗

阿富汗 ATRA 发布新的型式认证批准程序。

On May 2021, the Afghanistan Telecom Regulatory Authority (ATRA) published a New Type Approval procedure, which has already entered into force.

This provision includes, but it is not limited to the following equipment:

  • Fixed Radio Transmitters
  • Mobile Terminal Equipment
  • Broadcasting Equipment
  • Satellite Transmitter Equipment
  • Frequency dependent Medical Equipment and Devices
  • Short Range Radio Devices

 

ATRA may require testing, when this is the case one commercial sample shall be included in the application and shall come with where necessary accessories, device drivers and software and RF cables. This sample will be retained and used by ATRA.

Type Approval Certificates will be valid for an unlimited duration.

All approved equipment should follow the below labelling requirement:

 

Indonesia 印度尼西亚

SDPPI将接受国外检测报告的受理时间又延长了6个月,日期至2021年12月31日。

SDPPI had extended the foreign test report acceptance for another 6 months. The date of acceptance is until 31st December 2021. It is not announced officially but the extended date are reflected on the Lab List in the website.

 

Ivory Coast (Cote d ‘Ivoire) 科特迪瓦

在 76-77 GHz 频段运行,用于车辆防撞雷达的设备现已在科特迪瓦获得批准,可申请型式认证。

Equipment operating in the 76-77 GHz frequency band intended for vehicle collision avoidance radars are now approved in Ivory Coast (Cote d’Ivoire). This information follows a letter referenced number: 0021/250 / DGF / DITBS / SATR / DP from AIGF (Ivorian frequency management agency) addressed to ARTCI, the telecommunications regulatory agency of Cote d ‘Ivoire.

 

Malaysia 马来西亚

马来西亚 MCMC 已于 2021 年 6 月发布新的频率分配。

Malaysia MCMC had issued the new Class Assignment in June of 2021.

There are few changes from Class Assignment No.1 2020 to Class Assignment No.1 2021

  • New Frequency Added
  • Removed Usage of the frequency
  • Removed Lease Channel Radio Access devices schedule and change the total schedule to twenty-eighth schedule (CA No.1 2020 is twenty-ninth schedule)

 

Saudi Arabia 沙特阿拉伯

CITC 已更新通信和信息技术设备的技术规范,以适应最新的技术发展。这些规范涵盖了所有制造或供应给沙特阿拉伯的通信和信息技术设备,作为其批准的技术基础,并且对在沙特阿拉伯制造、供应或销售这些设备的所有相关方也具有约束力。

CITC has updated the technical specifications of communications and information technology devices and equipment to accommodate the latest technological developments

These specifications cover all communication and information technology devices and equipment that are manufactured or supplied to the Saudi Arabia as the technical basis for their approval, and are also binding on all parties that manufacture, supply, or sell these devices and equipment in the Saudi Arabia.
As part of CITC’s continuous emphasis on transparency and public participation in the decision-making process, CITC has surveyed the public’s views on the draft technical specifications before issuing the final official versions.

We would like to inform you that CITC has approved and published the updated technical specifications on CITC’s website through the link below

https://www.citc.gov.sa/en/RulesandSystems/RegulatoryDocuments/EquipmentApproval/Pages/Technical_Specification.aspx

 

Saudi Arabia 沙特阿拉伯

SASO 已就SASO IEC 62368-1:2020 标准的实施做出以下决定:

1.SASO IEC 62368-1:2020 的执行日期延后至2023年1月1日 ,即自2023年1月1日起将只接受IEC 62368-1第三版CB证书与测试报告 (IECEE 62368-1: 2018)

2.根据IEC 62368-1:2014第二版的CB证书与测试报告将被接受到 2022年12月30日

SASO has decided the followings regarding the implementation of the standard SASO IEC 62368-1:2020 :

1.The new date to enforce the standard SASO IEC 62368-1:2020 will be January 01, 2023 instead of July 01, 2021.

2.The test report as per SASO IEC 62368-1:2017 AS (IEC 62368-1:2014) will be accepted until the date of December 30, 2022.

 

RoHS / REACH

Saudi Arabia 沙特阿拉伯

2021 年 7 月 9 日,沙特阿拉伯标准、计量和质量组织 (SASO) 发布沙特阿拉伯 RoHS 技术法规。 该法规旨在限制在电气和电子设备中使用某些有害物质,并定义供货商必须遵守的合格评定程序。相关方必须在 2022 年 1 月 5 日 (官方公报上公布后 180 天) 满足本条例的规定。 不符合规定的产品自发布之日起最多可在市场上流通一年。

On 9 July 2021, the Saudi Arabian Standards, Metrology and Quality Organisation (SASO) issued a Technical Regulation for Saudi Arabia RoHS. The Regulation aims to restrict the use of certain hazardous substances in electrical and electronic equipment, and to define conformity assessment procedures to which suppliers must adhere.

Relevant parties are given until 5 January 2022 (180 days after publication in the official gazette) to meet the provisions of this Regulation. Non compliant products can be circulated in the market for a maximum period of one year after publication.

 

家用电器 House Appliances

Brazil 巴西

2021 年 6 月 25 日,巴西国家计量、标准化和工业质量研究所 (INMETRO/CONMETRO) 发布第 267号协议,批准商用电烤箱的质量技术法规和合格评定要求。该协议于 2021 年 7 月 1 日生效。

On 25 June 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No 267 to approve the quality technical regulation and the conformity assessment requirements for commercial electric ovens.

This Portaria approves the consolidated regulation for commercial electric ovens and establishes the technical regulation on quality, conformity assessment and specifications for the conformity identification mark through Annexes I, II, and III.

It applies to combined, forced convection and ballast electric ovens, closed, with nominal power below 20kW, power supply voltage up to 250V for single-phase and 480V for three-phase, with or without forced air convection.

Gas-fired ovens which have electrical parts contributing to their operation shall be subjected to safety tests.

Concerning marking, the product must be supplied with adequate information, legible, and located in an appropriate place, the instruction for use, maintenance, and installation, which is essential for the use of the appliance without any safety risks for the user.

This Portaria enters into force on 1 July 2021.

 

Brazil 巴西

2021 年 6 月 25 日,巴西国家计量、标准化和工业质量研究所 (INMETRO/CONMETRO) 发布第 268 号协议,批准微波炉的质量技术法规和合格评定要求。该协议于 2021 年 7 月 1 日生效。

On 25 June 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 268 to approve the quality technical regulation and the conformity assessment requirements for microwave ovens.

This Portaria approves the consolidated regulation for microwave ovens and establishes the technical regulation on quality, conformity assessment and specifications for the conformity identification mark through Annexes I, II, and III.

It applies to household microwave ovens.

This Portaria enters into force on 1 July 2021.

 

Brazil 巴西

2021 年 6 月 26 日,巴西国家计量、标准化和工业质量研究所 (INMETRO/CONMETRO) 发布第 269 号 协议,批准空调的合格评定要求。该协议于 2021 年 7 月 1 日生效。

On 26 June 2021, Brazil’s National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 269 to approve the conformity assessment requirements for air conditioners.

This Portaria approves the consolidated regulation for air conditioners and establishes the technical regulation on conformity assessment and specifications for the conformity identification mark through Annexes I and II.

It applies to monoblock, single-body window or wall-mounted, and split-system type air conditioner, with a cooling capacity of up to 17.58 kW (60,000 BTU/h).

The following products are excluded from the scope of this Portaria:

portable, duct, and multi-split type air conditioners;

  • air conditioners for land, railway, maritime, and air vehicles;
  • air conditioners with condenser units powered by solar energy.

According to Article 5, when sold in physical or virtual places, products must bear the ENCE in a visible manner and, in the case of virtual commerce, the site administrator must provide the ENCE or the information contained therein in text format on all pages where the product is offered or displayed, in an ostensible, unambiguous manner next to the image or identification of the product model. The same applies to sales catalogues.

Annex I deals with the pre-market and conformity assessment requirements for air conditioners. Air conditioners manufactured, imported, distributed and marketed in the national territory must be subject to conformity assessment through the supplier declaration mechanism. The certification of air conditioners must be conducted by family, which is constituted as the set of models, produced in the same manufacturing unit, intended for the same function and that can be grouped according to their constructive characteristics.

The Air conditioners must be subjected to all the safety tests laid down in IEC 60335-1 and IEC 60335-2-40.

Finally, Annex II demonstrates the Conformity Identification Mark and the National Energy Conservation Label – ENCE.

This Portaria entered into force on 1 July 2021.

 

Chile 智利

[法规草案] SEC计划更新家用加热器的安全测试和认证协议PE Nº1/19。该协议草案正在征集意见,主要变化包含:

1. 更新标准

2. 更新强制产品范围

3. 更新认证单元划分原则

4. 其他要求等

SEC is analyzing the update of SEC Protocol PE N°1/19. The SEC protocol is under public consultation. The main changs proposed are:

1. update of standard

2. clarification of scope

3. clarification for the way to conform a faimily.

4. other requirements.

 

China Taiwan 中国台湾

2021 年 6 月 24 日,台湾标准检验局公告修正「应施检验电风扇等七项商品之相关检验规定」,并即日起立即生效,自 2023年1月1日起强制实施。

针对二次锂系电池的安全问题,标检局扩大列检包含电风扇、真空吸尘器及吸水清洁机、电动食品碾磨机、电动食品混和器、电动榨汁机、烫(整)机和电动按摩器具等7种电器。这些产品使用的二次锂系电池/电池组应符合CNS 15364:2013和CNS 62133-2:2018第7.3.8.1节「振动」和7.3.8.2节「机械冲击」。

Amendments to the Legal Requirements for Fans and 6 Other Electrical Appliances

On June 24, 2021, the Taiwan Bureau of Standards, Metrology and Inspection (BSMI) approved the Amendments to the Legal Requirements for Electrical Appliances (fans, vacuum cleaners & water-suction cleaners, electric food grinders, electric food mixers, electric juice extractors/ fruit squeezers, electric hair setting curlers, electric massage appliances)

In response to the safety concerns of secondary batteries which resulted in increasing incidents of explosion, the Bureau of Standards, Metrology and Inspection (BSMI) include products with secondary cells/batteries in the inspection scope based on a staged approach. This proposal covers fans and 6 other electrical appliances and the secondary cells/batteries used by these products shall comply with CNS 15364: 2013 and Sections 7.3.8.1 “vibration” and 7.3.8.2 “mechanical shock” of CNS 62133-2: 2018. Relevant administrative arrangements for products already certified are provided. The regulation is with immediate effective and the date of implementation is 1 January 2023.

 

Thailand 泰国

2021 年 6 月 16 日,泰国工业部宣布一项关于空调强制性安全要求的部级法规。 该法规主要要求空调必须符合工业标准 TIS 1529-2561。 该标准将于 2022 年 6 月 15 日起强制实施。

On 16 June 2021, the Thai Ministry of Industry announced a ministerial regulation on Mandatory Safety Requirements for Air Conditioners.

The Regulation primarily requires that air conditioners must comply with Industrial Standard TIS 1529-2561 issued in accordance with the Industrial Product Standards Act.

The Standard will be of mandatory application with effect from 15 June 2022.

 

能源效率要求 Energy Efficiency Requirements

India 印度

因疫情影响, BEE已向电力部提出延长储能式电热水器原2021/06/30到期之标准效期。

在延长期限前已获批准的星级标签的型号,于此状态中依旧有效。续批准无需支付续期费用。需确认延长期间将继续使用的模型数量。

BEE proposes to extend the validity of existing energy performance standard of Electric Water Heaters.

The existing energy consumption standards for Storage Type Electric Water Heater are valid till 30th June 2021 and the revised energy consumption standards are to be made effective from 1st July 2021.

In view of the adverse impact of the COVID -19 pandemic on the business of Indian Storage type Electric Water Heater, BEE has sent the proposal to Ministry of Power to extend the existing energy performance standard of Electric Water Heater.

Accordingly, the portal to seek continuation approval for already approved star labelled models till the extended period is being made live. No renewal fee to be paid for seeking the continuation approval. Kindly confirm the number of models to be continued during the extended period.

 

India 印度

[法规草案] 印度公布 <<能源局电吊式风扇标签的详细信息和显示方式, 2021令>> 的草稿规范,目前意见征集中,正式公告后六个月纳入强制。

DRAFT “Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Electric Ceiling Type Fans) Regulations, 2021”

The regulation may be called “the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Electric Ceiling Type Fans) Regulations, 2021”.

Particulars to be displayed on label.- (1) On every Electric Ceiling Type Fan, the following particulars shall be displayed on its label, namely:-

(a) the logo of the Bureau of Energy Efficiency;

(b) name of manufacturer or importer and brand;

(c) trade name and number;

(d) model and year of manufacturing or import;

(e) unique series code;

(f) power input in watts;

(g) air delivery in cu m/min;

(h) service value in cu m/min/Watts;

(i) star level of Electric Ceiling Type Fan ; and

(j) label period

 

Mexico 墨西哥

2021年6月12日,NOM-015-ENER-2018的最终过渡阶段已结束,这意味着墨西哥的家电冰箱和冰柜的销售必须符合最大能耗限制和标签要求。

Mexico’s National Commission for the Efficient Use of Energy CONUEE is reminding interested parties that with the entry into force of the third and last stage of NOM-015-ENER-2018 refrigerators and freezers purchased by Mexican consumers must have the same energy efficiency levels as those sold in the United States and Canada.

On 12 June 2021 the final transitional phase under NOM-015-ENER-2018 ended, meaning that household appliance refrigerators and freezers marketed in Mexico must comply with the maximum energy consumption limits and labelling requirements.

The energy consumption specifications and the test methods for refrigerators and freezers are now fully aligned with current regulations in the United States and Canada.

 

Singapore 新加坡

2021 年 3 月 26 日,新加坡国家环境局 (NEA) 批准修订《节能 (管制商品和注册供货商) 条例》。 该修正案规定了三相 VRF 空调的最低能效标准 (MEPS) 和强制性能源标签计划 (MELS)。 该修正案于 2021 年 4 月 1 日生效。

On 26 March 2021, the Singapore National Environment Agency (NEA) approved an amendment of the Energy Conservation (Regulated Goods and Registered Suppliers) Regulations.

This amendment sets out the Minimum Energy Performance Standards (MEPS) and the Mandatory Energy Labeling Scheme (MELS) for three-phase VRF air conditioners.

This amendment entered into force on 1 April 2021.

 

China Taiwan 中国台湾

2021 年 6 月 11 日,台湾经济部批准了关于空气净化器最低能效标准测试和能效等级标识和检验的通知。 本通知适用于符合CNS 16098并列入经济部标准检验局检验目录的空气净化器。本通知自 2023 年 1 月 1 日起生效。

Minimum Energy Performance Standards Testing and Efficiency Rating Labelling and Inspection for Air Cleaners

On 11 June 2021, the Taiwan Ministry of Economic Affairs approved a notice on Minimum Energy Performance Standards Testing and Efficiency Rating Labelling and Inspection for Air Cleaners.

This Notice applies to the air purifiers that comply with the CNS 16098 and are included in the catalog to be inspected by the Bureau of Standards, Metrology, and Inspections of the Ministry of Economic Affairs. This Notice does not apply to the following products:

(1) the air purifiers with CASR that’s lower than 0.26 or higher than 12.80.

(2) the air purifiers that work with only pure ozone, ultraviolet light, or photocatalyst.

(3) the air purifiers with an input voltage of the USB port body is DC 5V and the power adapter is not provided, solely with car cigarette lighter power supply, or only uses three-phase voltage or pure dry battery as the power supply.

This Notice enters into force on 1 January 2023.

 

其他 / 多主题产品 Others / Products with Multiple Subjects

Egypt 埃及

埃及贸易和工业部颁布了第 221 号决定,为生产商和进口商提供六个月的过渡期,以遵守一些新制定的埃及标准。该决定于 2021 年 6 月 14 日生效。

The Egyptian Ministry for Trade and Industry enacted Decision No. 221 providing producers and importers with a six-month transitional period to comply with the following Egyptian standards:

  • ES 8434 Method of measuring the energy consumption of gas-burning ovens
  • ES 8441 Eco-Friendly standards for energy efficiency of water pumps
  • ES 8459 Flexographic inks
  • ES 8284-2 Outdoor furniture – seating and tables for camping, domestic and contract use part 2 – mechanical safety and testing requirements
  • ES 8462 Furniture – sofa bed mechanisms – testing methods
  • ES 5969-2 Water meters for cold potable water and hot water – Part 2 – testing methods

 

The following two standards are no longer mandatory:

  • ES 372-2 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners Part 2 : classification of water heaters and gases
  • ES 372-3 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners Part 3 – operational requirements
    The Decision entered into force on 14 June 2021.

 

Saudi Arabia 沙特阿拉伯

SASO 已宣布将原本预计在2021年7月1日实施的SASO IECEE 认可证书 (简称SIRC证书) 第一阶段新增产品推迟至 2021 年 9 月 1 日。从 2021 年 9 月 1 日起,第一阶段新增产品和第二阶段新增产品都将需要 SASO IECEE 认可证书。

SASO has announced the postponement of IECEE implementation Stage 1 till September 01, 2021.

Both Stage 1 and Stage 2 products will require SASO IECEE Recognition certificate from September 01, 2021.

 

Stage 1 products:

 

Product

Testing standard

Kettles

IEC 60335-2-15

Coffee makers

IEC 60335-2-15

Electrical Oil fryers

IEC 60335-2-13

Electric pumps

IEC 60335-2-41

IEC 60335-2-51

Video Games & accessories

IEC 62368-1 : 2018

Cables

IEC 60227 & parts

IEC 60245 & parts

IEC 60502 & parts

IEC 60702-1

IEC 60800

IEC 62821 Parts

IEC 62930

 

Stage 2 products:

 

Product

Testing standard

Shavers

IEC-60335-2-8

Desktop computers

IEC 62368-1

Circuit breakers

AC Circuit breakers :

IEC60898-1

AC/DC Circuit breakers :

IEC 60898-2

DC circuit Breakers :

IEC 60898-3

Main Current circuit breaker

IEC 60947-2

Mobile charging cables

IEC 62368-1

 

Uzbekistan 乌兹別克斯坦

2021 年 6 月 2 日,乌兹别克斯坦共和国总统批准了一项法令。该法令规定,自 2021 年 9 月 1 日起,某些低风险产品的合格评定应通过合格声明进行,无需颁发合格证书。

该法令还规定,自 2021 年 11 月 1 日起:

(a) 对某些高风险产品的进口实行国家注册程序,确认进口产品符合技术法规的文件应在产品抵达乌兹别克斯坦前至少 15 天在海关电子程序中注册。

(b) 具有单一符合性证书的低风险产品的进口将被授权 24 个月,合格证书应由在乌兹别克斯坦设立的经认可的合格评定机构颁发。

(c) 进口产品的符合性控制应由技术监管机构或作为其结构一部分的授权组织进行。

(d) 不合格产品列表应由技术监管机构或授权组织保存。

法令中没有规定低风险或高风险的产品类型,这些问题将由投资和对外贸易部稍后确定。

该法令于 2021 年 6 月 3 日生效。

On 2 June 2021, the President of the Republic of Uzbekistan approved a decree. This Decree establishes that from September 1, 2021, conformity assessment of certain low-risk products shall be carried out by declaration of conformity without the issuance of a certificate of conformity. The declaration of conformity shall be drawn up on the basis of test reports after carrying out comprehensive product tests in accordance with technical regulations. Manufacturers, suppliers, and traders remain responsible for ensuring compliance with the mandatory requirements established by technical regulations and standards.

The Decree also establishes that as of November 1, 2021 :

(a) A state registration procedure for the import of certain high-risk products shall be introduced. Documents confirming the conformity of imported products to technical regulations shall be registered with the customs electronic program at least 15 days before the arrival of the products in Uzbekistan.

(b) The import of low-risk products with a single certificate of conformity will be authorized for a period of 24 months. The certificate of conformity shall be issued by an accredited conformity assessment body established in Uzbekistan.

(c) Controls of conformity of imported products shall be carried out by the Technical Regulation Agency or an authorized organization that is part of its structure.

(d) A list of non-compliant products shall be maintained by the Technical Regulation Agency or an authorized organization.

The types of products to be considered with low-risk or high-risk profiles are not specified in the Decree. These issues will be determined at a later date by the Ministry of Investment and Foreign Trade.

This Decree came into force on 3 June 2021.