2022年7月国际市场准入资讯更新



2022年7月8日 | 市场准入

 

 

资讯 / 电信 ITE / Telecom

澳大利亚

澳大利亚近日发布音频/视频,信息和通信技术设备 安全要求新版标准,AS/NZS 62368.1:2022 (基于IEC 62368-1:2018 版本3.0)。

New version of standard was published recently:

AS/NZS 62368.1:2022 – Audio/video, information and communication technology equipment, Part 1: Safety requirements (IEC 62368-1:2018 (ED. 3.0), MOD)

 

EAEU 欧亚经济联盟

2022 年 6 月 14 日,欧亚经济委员会发布第 90 号决定,关于修订关于低压设备安全 (LVE) 技术法规的第 768 号决定,扩大了技术规则不适用的设备列表。该决定将于 2022 年 12 月 11 日生效。

err_14062022_90_doc.pdf (eaeunion.org)

On 14 June 2022, the Eurasian Economic Commission published a Decision No. 90 on Amendments to Decision No. 768 on Technical Regulations on Safety of Low Voltage Equipment (LVE).

The Decision introduced a new edition of Article 1(2), extending the list of equipment to which the Technical Regulations does not apply, adding:

  • second-hand low-voltage equipment;
  • low-voltage equipment included in the scope and subject to confirmation of compliance with the requirements of the technical regulations of the Customs Union “On the safety of machinery and equipment” (TR CU 010/2011), “Safety of elevators” (TR CU 011/2011) and “On the safety of equipment for operation in explosive environments” (TR TS 012/2011), except for cables, wires, cords;
  • low-voltage equipment manufactured by legal entities and individuals registered as individual entrepreneurs, not intended for circulation in the customs territory of the Union, transfer free of charge, rental, hire or lease;
  • defence products to ensure the interests of defence and security, including those supplied under the state defence order;
  • low-voltage equipment components (assemblies, components and components) supplied by the manufacturer of this low-voltage equipment on a contractual basis, provided that these components cannot be available to the consumer (user) except as built-in low-voltage equipment for which they are intended;
  • components of low-voltage equipment (assemblies, components and components), the safety of which is partially or completely determined by how these components are built into other electrical equipment, and cannot be assessed (tested) otherwise than as part of this equipment (for example, connectors, winding wires, printed circuit boards, microswitches, relays, integrated circuits, discrete semiconductor devices, capacitors, inductors, resistors, filters and other components for mounting on printed circuit boards or otherwise inside housings or protective shells.

The Decision also adds new definitions to Article 2 and establishes marking and operational documentation requirements is also amended in Article 5.

The Decision will enter into force 180 calendar days from the date of official publication, on 11 December 2022.

err_14062022_90_doc.pdf (eaeunion.org)

 

EAEU 欧亚经济联盟

2022 年 6 月 14 日,欧亚经济委员会发布了第 91 号决定,修订了《电磁兼容性技术法规》,包括并不限于以下变化:

  • 增加了本技术法规不适用的技术方式
  • 添加新定义
  • 操作文件中的字母商标、专有名称、其他名称和细节可以用其他语言提供;
  • 计量单位可以使用其国际名称给出;
  • 如果信息量允许,则允许不起草操作文件,但在技术工具本身或其包装上标明信息;
  • 将系统模块和收款机添加到需要以认证形式确认符合性的技术手段清单中;
  • 将复印机(包括多功能设备) 添加到需要以认证形式确认符合性的技术手段清单

该决定将于正式公布后 180 天后,即 2022 年 12 月 11 日生效。

err_14062022_91_doc.pdf (eaeunion.org)

On 14 June 2022, the Eurasian Economic Commission published a Decision No. 91 amending Technical Regulations on Electromagnetic Compatibility.

The Decision introduced the following changes:

  • New edition of Article 2 adding technical means to which this technical regulation does not apply: specially designed to ensure safety in the field of the use of atomic energy; used technical means (exploited); medical devices; defense products which ensure the interests of defense and security, including those supplied under the state defense order;
  • Adding new definitions;
  • Letter trademarks, proper names, names of settlements and other names and details in operational documents may be given in other languages;
  • Units of measurement may be given using their international designation;
  • If the amount of information provided for in paragraph 4 of the Article 5 allows, then it is allowed not to draw up operational documents, but to indicate the information on the technical tool itself or on its packaging;
  • Adding system blocks and cash registers, including those operating in conjunction with a computer to the list of technical means subject to confirmation of conformity in the form of certification (Annex 3, Part 3);
  • Adding copiers (including multifunction devices) to the list of technical means subject to confirmation of conformity in the form of certification (Annex 3, Part 4).

The Decision will enter into force 180 days after its official publication, on 11 December 2022.

err_14062022_91_doc.pdf (eaeunion.org)

 

China Hong Kong 中国香港

2022 年 4 月,通讯事务管理局 (OFCA) 发布了新的类别牌照、新的技术标准 HKCA1081 并更新了标签指引 HKCA3211。随着新法规的通过,通讯办现在允许 WLAN 设备部分使用 6 GHz 频谱。

In April 2022, the Office of the Communications Authority (OFCA) in Hong Kong published a new Class Licence, new Technical Standard HKCA1081 and update the labeling guideline HKCA3211.

With the adopted new regulations the OFCA allows now WLAN devices to utilize the 6 GHz spectrum partially:

  • “Client devices” are exempted from mandatory type approval processes, while “6 GHz Access Points” are expected to be subject to obligatory conformity assessment and labelling requirements.
  • Allowed Frequency band: 5.925 – 6.425 GHz
  • The maximum output power shall not exceed the limits indicated below:

Location of Use

Output Power (EIRP)

Indoor

24 dBm

Outdoor

14 dBm

  • All radiocommunications apparatus operating in the 6 GHz band shall meet the technical requirements in the ETSI EN 303 687 harmonised standard.
  • However, indoor devices are allowed to diverge from the mentioned EU requirements, namely:
  • Power Output Limit has been increased to 24 dBm EIRP;
  • PSD has been increased from 10 dBm/MHz to 11 dBm/MHz.

 

India 印度

国家通信安全中心机构于 2022 年 6 月 20 日发布关于 MTCTE体系下电信产品的 ITSAR认证(Indian Telecom Security Assurance Requirements) 的新通知。

National Centre for Communication Security body has issued a new notification on ITSAR requirements for telecom products under MTCTE (Mandatory Testing and certification of Telecommunication Equipment) Scheme on 20/06/2022

The highlights are:

  • Start of Voluntary Security Certification of IP Router, Wi-Fi CPE and UICC (SIM) Equipment in Q3/Q4 of Financial Year 2022-23.
  • Mandating the security certification as part of MTCTE from 01-Apr-2023.

List of approved product and draft products are below.

https://nccs.gov.in/nccs/itsar.html

 

India 印度

由于测试基础设施不可用,TEC 已宣布针对无线电广播接收器和 PTP PMP 微波固定无线电系统的部分测试进行通用豁免。

Due to unavailability of the testing infrastructure, generic exemption has been announced by TEC for testing against below set of testing parameters for Radio Broadcast Receivers and PTP PMP Microwave Fixed Radio Systems:

Product category

Exempted test parameters

Validity of exmption

Radio Broadcast Receiver (RBR)

· Frequency of operation for Radio broadcast receivers

· Radio Conformance for RBR

· GPS

· NavIC

up to 1st Dec 2022 or till further orders

PTP and PMP Microwave Fixed Radio Systems

· IT Equipment safety for radio Products parameter as per EN/IEC 60215: 2016

up to 22nd Dec 2022 or till further orders

It should be noted that in order to complete the submission of the application for MTCTE certification for the aforementioned product categories, the appropriate notification must be posted against the appropriate parameters in the MTCTE portal.

The notifications can be accessed at:

RBR: https://www.mtcte.tec.gov.in/filedownload?name=downloadDocument_RBR_parameters_exemptions.pdf

PTP and PMP Microwave Fixed Radio Systems: https://www.mtcte.tec.gov.in/filedownload?name=downloadDocument_Gen_Exemp_PTP_PMP06232022.pdf

 

India 印度

为减轻行业和企业的合规负担,电信设备定期强制性测试和认证 (MTCTE) 证书的有效期已从 5 年延长至 10 年,即日起生效。

The validity of Regular Mandatory Testing and Certification of Telecommunication Equipment (MTCTE) certificate has been enhanced from 5 years to 10 years with immediate effect with a view to reduce the compliance burden on industries and businesses.

 

South Korea 韩国

2022 年 5 月 31 日,韩国无线电研究机构 (RRA) 批准了对《电磁兼容性标准通知》的修订。

该文件在某些​​电磁兼容标准的辐射干扰限值中增加了 3m 容差限值,以便可以选择性地应用 10m 或 3m 限值。本通知自2023年1月1日起实施。

On 31 May 2022, the South Korean Radio Research Agency (RRA) approved an amendment to the Notice on Criteria for Electromagnetic Compatibility.

The amendment aims to align certain national EMC standards with international standards.

The document adds 3m tolerance limits to radiation disturbance limits of certain electromagnetic compatibility standards so that either 10m or 3m limit can be applied selectively. The improved electromagnetic compatibility standards include:

  • EMC standards for household electrical devices and electric devices;
  • EMC standards for lighting equipment;
  • EMC Standards for wireless equipment;
  • EMC standards for multimedia devices, etc.

The document also amends EMC standards for low voltage switchgear and control gear, by expanding frequency range for radiated immunity test for circuit-breakers, relay, contactors and motor-starters, etc.

Lastly, the amendment introduces editorial changes, such as KN test methods referenced in Annexes to KS standards.

This Notice will enter into force on 1 January 2023.

 

China Taiwan 中国台湾

BSMI颁布修正「应施检验无线充电器商品之相关检验规定」,自 2022年8月1日起,表列商品检验方式采型式认可逐批检验或验证登录 (型式试验模式加符合型式声明模式) 双轨并行。

https://www.bsmi.gov.tw/wSite/public/Data/f1653982808016.pdf

 

In response to the concerns raised about high non-compliance rate of wireless chargers, which are allowed to complete the conformity assessment procedure (Registration of Product Certification, RPC) before they are placed on the market, the Bureau of Standards, Metrology and Inspection (BSMI) is revising the time of completing the conformity assessment procedure to before the products are imported or transported out of the production premises. The procedure of Type-Approved Batch Inspection (TABI) will also be provided as an alternative to RPC. Business operators may choose the appropriate procedure depending on their needs. A specific Commodity Classification Code (C.C.C. Code) is assigned to wireless chargers for customs clearance for this purpose.

https://www.bsmi.gov.tw/wSite/public/Data/f1653982808016.pdf

 

China Taiwan 中国台湾

[法规草案] BSMI颁布「应施检验信息商品数字摄影机及数字相机之相关检验规定修正草案」,草案预定将于2025年1月1日生效。表列商品原检验方式采符合性声明者,自2025年1月1日起原符合性声明失其效力。

https://www.bsmi.gov.tw/wSite/public/Data/f1653641687763.pdf​

The Bureau of Standards, Metrology and Inspection of the Ministry of Economic Affairs (BSMI) proposes to change the conformity assessment procedure of digital cameras due to the high rate of noncompliant market surveillance results. The new conformity assessment procedure will be Registration of Products Certification (Modules II+III) or Type-approved Batch Inspection (TABI). The amendments will take effect from 1 January 2025. The import regulation code of the commodity is assigned as C02.

https://www.bsmi.gov.tw/wSite/public/Data/f1653617418659.pdf

 

China Taiwan 中国台湾

德国莱茵TÜV台湾公司已完成BSMI安规与EMC新标准资质认证,可以开始受理CNS 15598-1与CNS 15936当地测试案件,以及CB IEC 62368-1: 2018转CNS 15598-1案件。若要使用IEC 62368-1:2014,则需要另外评估或者补差异,才可接受转CNS 15598-1。

TÜV Rheinland Taiwan has completed to extend scope accreditation of BSMI Safety and EMC.

It is now possible to apply local testing for CNS 15598-1 (or base on standard IEC 62368-1: 2018) and CNS 15936 through TÜV Rheinland Taiwan. However, if the clients use the CB test report with second edition (IEC 62368-1:2014), there is a need to do pre-evaluation or addition difference.

 

Thailand 泰国

​泰国工业标准协会( Thai Industrial Standards Institute, TISI)于2022年6月24日正式宣布20种音视频、信息和通信技术设备应符合最新标准TIS 62368 Part 1-2563。旧标准的证书将于2022年12月21日自动失效。

新标准强制实施日:

(A) 2022年12月21日:以下管制产品 (1) ~ (19)

(B) 2023年10月17日:以下管制产品 (20)

注意: 所有列出旧标准TIS 1195-2536的证书将会在2022年12月21日自动失效。

特别提醒:  TISI新标准的采用扩大了认证产品的类别–新增管制产品第 (20) 项: Electrical power supplies for mobile phones and tablets (手机/平板充电器)。也就是说,手机充电器,平板充电器,自2023年10月17日起将强制TISI认证。

TISI had officially announced following mandatory standard notification.

– TIS 62368 Part 1-2563 Audio/video, information and communication technology equipment – part 1: safety requirements

Please find related regulation as follows;

1) Ministerial regulation TIS62368_1_2563: this is announcement of TIS 62368 Part 1-2563 standard as mandatory standard.

Announcement: date 24 June 2022.

Effective date: (21 December 2022) 180 days from announcement date for product item (1) to (19).

Effective date: (17 October 2023) 480 days from announcement date for product item (20).

2) TIS62368_1_2563 Standard: This is industrial product standard TIS 62368 Part 1 – 2563.

Applicable product summary: TIS 62368 Part 1-2563 industrial product standards audio, Video, Information and Communication Technology Equipment, Volume 1, safety requirements.

(1) radio receiver industry products

(2) television receiver industry products

(3) signal amplifier industry products

(4) disc player industrial products

(5) industrial products of video game consoles

(6) industrial products of wireless microphone receivers

(7) radio receiver industry products

(8) television receiver industry products

(9) satellite receiver industry products

(10) loudspeaker industry products with signal amplification

(11) signal converter industry products

(12) signal modifier industry products

(13) audio mixer industry products

(14) electronic musical instrument industry products

(15) industrial products of audio and video players

(16) industrial products, audio and video receivers via the Internet

(17) cable television receiver industry products

(18) industrial products audio and video converter

(19) industrial products, electrical power supplies for electronic appliances used with Industrial products Article 2 (1) – (18)

(20) industrial products, electrical power supplies for mobile phones and tablets

Note: The scope of this mandatory standard do not cover industrial products under Clause 2 (1) to (18) used in public and professional use or which is an electronic appliance that uses a voltage less than 50 V a.c. or 75 V d.c.

As a result of this new standard implementation, all certificates under current standard TIS 1195-2536 will be automatically withdrawn on 21 December 2022.

 

 

电池 Batteries

Australia 澳大利亚

钮扣电池和含钮扣电池产品的相关强制性标准已于 2022 年 6 月 22 日生效。

The four mandatory standards for button batteries and products containing button batteries are due to come into effect on 22 June 2022 at retail level.

Under the mandatory safety and information standards, products must have secure battery compartments to prevent children from gaining access to the batteries. Manufacturers must undertake compliance testing, supply batteries in child-resistant packaging, and place additional warnings and emergency advice on packaging and instructions.

The National Retail Association urges businesses who supply button batteries, or products that are powered by them, to review their product lines and ensure compliance with the standards ahead of the 22 June deadline.

 

 

家用电器 House Appliances

Panama 巴拿马

2022 年 5 月 18 日,巴拿马贸易和工业部发布第 49 号决议,废除了 DGNTI COPANIT 104-2017 技术法规和 DGNTI COPANIT 509-2017 技术标准,并承认经巴拿马 2022 年第 23 号决议批准的中美洲技术法规 RTCA 23.01.78.20 (关于具有可变制冷剂流量的无管分体式空调),该新技术法规将于 2022 年 12 月 17 日生效。

该决议确认巴拿马标准和工业技术总指导 (DGNTI) 在 2022 年 3 月 1 日之前根据技术法规 DGNTI COPANIT 104:2017 颁发的证书将在其到期日之前有效。

该决议规定,2022 年 3 月 1 日之后颁发的证书自颁发之日起有效期为 1 年。有效期为 2022 年 12 月 17 日的证书将自签发之日起延期 1 年。

该决议确认在 2024 年 12 月 31 日之前,根据技术法规 DGNTI COPANIT 104:2017 对国内市场现有库存的标签将被接受。

该决议于 2022 年 5 月 18 日生效。

On 18 May 2022, the Panamanian Ministry of Trade and Industry published Resolution No. 49 setting out the transitional periods that will apply as Panama transitions from Technical Regulation DGNTI COPANIT 104-2017 and Technical Standard DGNTI COPANIT 509-2017 to the application of Central American Technical Regulation RTCA 23.01.78.20 on Ductless Split Type Air Conditioners with Variable Refrigerant Flow.

This Resolution repeals Technical Regulation DGNTI COPANIT 104-2017 and Technical Standard DGNTI COPANIT 509-2017 and recognises the ratification of Central American Technical Regulation RTCA 23.01.78.20 as approved by Panama Resolution No. 23, 2022 (published in the Official Gazette 29473 dated 9 February 2022) which will come into force on 17 December 2022.

It confirms that certificates issued by the Panama General Direction of Standards and Industrial Technology (DGNTI) prior to 1 March 2022 in accordance with Technical Regulation DGNTI COPANIT 104:2017 will be valid until their expiry date.

It provides that certificates issued after 1 March 2022 will be valid for 1 year from their date of issue.

Certificates issued with an expiry date of 17 December 2022 will be extended for a period of 1 year from their date of issue.

Finally, it confirms that the labelling of existing stock in the national market in accordance the Technical Regulation DGNTI COPANIT 104:2017 will be accepted until 31 December 2024.

This Resolution entered into force on 18 May 2022.

 

Phillippines 菲律宾

6月1号,菲律宾DTI发布了补充指引DAO 22-01。

以冰箱为例 (产品安全更新了范围,能效/性能更新与PELP计划一致),容积超过567L (到600L) 冰箱应该在2023年9月5号前申请强制性安全认证;当地库存能效产品应在2023年9月5号到2024年3月5号之间向BPS申请认证。

2024年3月5号开始进行市场监督,只有带有PS标识、IC贴纸及BPS认证标识的能效产品才能在市场上进行流通/销售。

On June 1, the DTI of the Philippines issued supplementary guidance DAO 22-01.

Take refrigerators as an example (the scope of product safety has been updated, and the energy efficiency/performance updates are consistent with the PELP plan), refrigerators with a volume exceeding 567L (to 600L) should apply for mandatory safety certification before September 5, 2023; locally stocked energy efficiency products should apply to BPS for certification between September 5, 2023 and March 5, 2024.

Market supervision will begin on March 5, 2024. Only energy-efficient products with PS logo, IC sticker and BPS certification logo can be circulated/sold in the market.

 

South Korea 韩国

2022 年 6 月 10 日,韩国技术与标准局 (KATS) 宣布修订 3 KC 电器安全标准:

  • KC 60335-1 家用和类似用途电器-安全第1部分:一般要求;
  • KC 60335-2-40 家用和类似用途电器-安全第2-40部分:电动热泵、空调和除湿机的特殊要求;
  • KC 60335-2-65 家用和类似用途电器- 安全第 2-65 部分:空气净化器具的特殊要求。

这些标准主要将针对UV-C辐射的非金属材料和内部布线的耐候性测试项目从强制性规定改为参考。 该通知自2022年6月10日起生效。

On 10 June 2022, the South Korean Agency for Technology and Standards (KATS) announced the revision of 3 KC safety standards for electrical appliances in order to mitigate the burden on electronic manufacturers.

The revised safety standards are as follows:

KC 60335-1 Household and similar electrical appliances – Safety Part 1: General requirements;

KC 60335-2-40 Household and similar electrical appliances – Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers;

KC 60335-2-65 Household and similar electrical appliances – Safety Part 2-65: Particular requirements for air-cleaning appliances.

These standards primarily change the weather resistance test items for non-metallic materials and internal wiring against UV-C radiation, from mandatory regulations to references.

The Notice enters into force on 10 June 2022.

 

 

能源效率要求 Energy Efficiency Requirements

Brazil 巴西

2022 年 6 月 3 日,巴西国家计量、标准化和工业质量研究所 (INMETRO/CONMETRO) 发布第 230号协议,以修订2021第 269号协议,关于空调合格评定和能源标签的技术要求。

第 230号协议部分空调期限推迟了12个月,该协议已于 2022 年 7 月 1 日生效。

On 03 June 2022, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 230 to amend Portaria No. 269, 2021 on Technical Requirements for Conformity Assessment and Energy Labelling of Air Conditioners.

This Portaria adds Article 13-A to Portaria No. 269/2021 in order to determine that for cassette-type conditioners of any cooling capacity and other devices with a capacity equal to or greater than 36 thousand Btu/h, the deadlines mentioned in Article 12 and its sole paragraph, as well as in Article 13, are postponed by 12 months, as follows:

Article 12: extension of compliance deadline to 31 December 2023;

Article 12 single paragraph: extension of compliance deadline to 30 June 2024;

Article 13: extension of compliance deadline to 30 June 2025.

The dates are adjusted owing to the impossibility of determining the energy consumption and the Seasonal Performance Index (IDRS) of cassette devices and split-types above 36 thousand Btu/h per ISO 16358-1:2013 due to the absence of a third-party accredited laboratory.

This Portaria will come into force on 1 July 2022.

 

Central America 中美洲

中美洲技术法规 RTCA 23.01.80:21 规定了某些无管分体式空调设备的能效要求,范围包括压缩机系统配备空气冷凝机且制冷量不超过 19050 Wt (65 000 BTU)的空调。

该决议将于 2022 年 8 月 17 日对萨尔瓦多、洪都拉斯和尼加拉瓜生效,于 2022 年 12 月 17 日对巴拿马、哥斯达黎加和危地马拉生效。

This Central American Technical Regulation RTCA 23.01.80: 21 establishes energy efficiency requirements for certain ductless split-type air conditioning equipment.

This Regulation establishes the minimum energy efficiency ratio (SEER) level, test method, conformity assessment procedure and labelling requirements for ductless split type air conditioners with variable refrigerant flow which are imported or marketed in Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica and Panama. The type of air conditioners in scope are those using electrical air-cooled condensers with a nominal cooling capacity of up to 19050 Wt (65 000 BTU) and operating by mechanical compression.

The Technical Regulation recognizes the validity of the following test methods for determining the performance of air conditioners:

  • ANSI/ASHARE 37-2009 Methods of testing for rating Unitary air conditioning and heat pump equipment. The American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. 2.
  • ARI 210/240- (2017) Performance Rating of Unitary Air-conditioning & Air-source Heat Pump Equipment;
  • NOM-026-ENER-2015 Energy efficiency in split type air conditioners (Inverter) with variable refrigerant flow, free discharge and ductless air conditioners (Mexican Standard).

In relation to labelling, all equipment shall bear the energy efficiency label set out in Annex B. The energy label shall:

  • be attached to the device or affixed by means of a sticker;
  • be affixed in a visible manner on the surface of the product;
  • contain, in legible and indelible form, in “Arial” font, the minimum information listed in section 11.3 of this Regulation;
  • comply with the dimension requirements as specified under section 11.4.

This Resolution will enter into force on 17 August 2022 for El Salvador, Honduras e Nicaragua and on 17 December 2022 for Panama, Costa Rica and Guatemala.

 

Chile 智利

2021 年 5 月 28 日,智利电力和燃料监管局 (SEC) 发布了第 34635 号决议,批准适用于微波炉的能源效率测试协议 PE No. 1/18/2:2021。 本议定书规定了家用微波炉能效认证的测试程序,包括带有电子控制式和机械控制式的微波炉。家用微波炉的制造商、进口商和贸易商必须根据该协议对其产品进行认证,并确保从 2022 年 1 月 31 日起,持有由认证机构颁发的能效批准证书及产品贴上能效标签才能进入市场销售。

On 28 May 2021, the Chilean Superintendence of Electricity and Fuels (SEC) published Resolution No. 34635 to approve Energy Efficiency Testing Protocol PE No. 1/18/2:2021 for microwave ovens.

This Protocol establishes the procedure for the performance of tests for the certification of energy efficiency of microwave cooking ovens for domestic use. This includes ovens with digital control and mechanical control. Microwave ovens which cannot accept loads with diameters ≥ 200 mm or with a height ≥ 120 mm. a height ≥ 120 mm are excluded from the scope of this Protocol.

Microwave ovens must be certified in accordance with this protocol to be placed on the market and have an Energy Efficiency Approval Certificate issued by a certification body and an energy efficiency label placed on the product.

This testing protocol is based on:

  1. Standards IEC 60705:2014 Microwave ovens for domestic use – Methods for performance measurement
  2. IEC 62301:2011 Electrical appliances for domestic use – Standby power measurement, and
  3. Resolution No. 20, 2021 on technical specifications for the design of the energy efficiency label.

This Resolution determines the date of application for this Protocol PE No. 1/18/2:21 is 31 January 2022.

Manufacturers, importers and traders of household microwave ovens must have their products certified in accordance with this protocol and ensure that they all carry the energy efficiency label from 31 January 2022.

 

Japan 日本

2022 年 5 月 31 日,日本经济产业省 (METI) 发布了对《空调能耗性能评估标准通知》(1999 年第 190 号)的修订。自2027年4月1日起适用于制冷量为4.0kW及以下的直吹式壁挂式家用空调。 自 2029 年 4 月 1 日起,其他家用空调以及将两台或多台室内机连接到一台室外机并单独控制室内机运行的所有多联机家用空调也适用。

On 31 May 2022, the Japanese Ministry of Economy, Trade and Industry (METI) issued an amendment to Notice of Evaluation Criteria for Energy Consumption Performance of Air Conditioners (No.190, 1999). The amendment aims to add new numerical standards for household air conditioners.

The amendment deletes Table 1 and makes changes to the numerical order of the tables. It further adds Table 4 which provides the required energy performance for household air conditioners.

This standard shall apply from 1 April 2027 to household air conditioners that are direct-blown and wall-mounted and have a cooling capacity of 4.0 kW or less.

It also shall apply from 1 April 2029 to the other household air conditioners, and all multi-type household air conditioners that connects two or more indoor units to one outdoor unit and controls the operation of the indoor units individually.

Section 1-2 provides the exceptions to the criteria, that even if the standard energy consumption efficiency of air conditioner has not been achieved, it is considered to have been achieved if certain standards are met.

 

India 印度

​BEE公布现行自愿制度下的吊扇能耗标准有效期至2022年6月30日。 在强制性制度下,标签有效期为2022年7月1日至2024年12月31日。

BEE decided the existing energy consumption standards of Ceiling Fan under voluntary regime is valid till 30 June,2022.  Under the mandatory regime,the label validity period will be from 1 July,2022 to 31 December,2024.

It covers every electric ceiling type fan operated by induction motors and Brushless Electric Motors of all the standard sweep sizes that work on single phase alternating current supply up to and including 250V, 50Hz.  For the purpose of determining the star level, the ceiling-type fans shall be tested as per the standards IS 374:2019 with all amendments.

 

India 印度

BEE 将推新logo纳入标准和标签 (S&L) 计划。BEE 自愿标签计划下的器具/设备样本标签中的 BEE 新标识已被纳入; 但强制性器具中的标识将分别在修订通知发布时纳入。

BEE is in process of incorporating its new logo in the sample label of all the appliances covered under Standards & labelling (S&L) program. The new logo of BEE in the sample label of appliances/equipment under BEE’s Voluntary labelling program have been incorporated. However, the logo in mandatory appliances will be incorporated as and when the amendment notification is published respectively.

For enabling the same, the editable files of revised sample labels for respective appliances are available on BEE star label portal for reference:

https://beestarlabel.com/Home/EquipmentSchemes?type=V

 

 

其他 / 多主题产品 Others / Products with Multiple Subjects

Singapore 新加坡

新加坡 CPSO (消费品安全办公室) 将更新中度风险受控商品所需的安全标准。

新要求的生效日期如下:

  • 从2024 年 6 月 1 日起 – 用于受控商品的新注册
  • 从2025 年 6 月 1 日起 – 续展注册

值得注意的是,从2024.6.1起,不再接受安全标准IEC62368-1:2014,而只接受IEC60950-1:2005+A1+A2 /IEC60065:2014和IEC62368-1:2018。

Singapore CPSO (Consumer Product Safety Office) wishes to state that, for the purpose of testing and certification for registration under the Consumer Protection (Safety Requirements) Regulations (CPSR), the required safety standards for medium risk Controlled Goods will be updated.

The new requirements will have the following effective dates:

  • From 1st June 2024 – for new registrations of Controlled Goods
  • From 1st June 2025 – for renewal of registration

It is worthwhile to pay attention that from 2024.6.1, safety standard IEC62368-1:2014 will no longer be accepted, while only IEC60950-1:2005+A1+A2 /IEC60065:2014 and IEC62368-1:2018 are accepted.

 

South Korea 韩国

2022 年 5 月 31 日,韩国技术与标准局 (KATS) 批准《关于需要安全确认的家居用品安全标准的通知》的修正案。 此次修订主要改变对电动自行车的安全要求。根据文件,电动自行车所需电机额定输出功率由“350W以下”改为“500W以下”。 本通知自2022年12月1日起施行。

On 31 May 2022, the South Korean Agency for Technology and Standards (KATS) approved an amendment to the Notice on Safety Standards for Household Items Subject to Safety Confirmation. The amendment primarily changes safety requirements for e-bikes. According to the document, the required motor rated output of electric bicycles has been changed from “350W or less” to “500W or less”.

This Notice will enter into force on 1 December 2022.

 

Thailand 泰国

2022 年 5 月 23 日,泰国标签委员会为了保护消费者,让其获得有关产品的准确和完整的信息,根据《标签管制商品标签特性通知》 (B.E. 2541, 1998) 发布了关于标签管制产品类别的公告.  类别包含以下产品:

  • 家庭用品
  • 个人产品
  • 纸制品和文具
  • 电器及部件(电热水壶、咖啡机、搅拌机、食品搅拌机、图像屏幕、计算机设备、收音机、音响设备、麦克风、扬声器、灯具(不包括医用灯)、冰柜 (不包括医用冰柜)、电炉、微波炉、电熨斗、LED灯)
  • 车辆和设备
  • 农业设备
  • 建筑材料
  • 其他(例如缝纫机、手机、手表、手表电池、计算器或相机)。

本公告自发布之日起90天,即2022年8月21日起实施。

On 23 May 2022, the Thai Chairman of the Board on Labelling issued an Announcement on Category of Labelling Controlled Products, in accordance with the Notice on Characteristics of the Label on Label-Controlled Goods (B.E. 2541, 1998).

In order to protect consumers by allowing them to obtain accurate and complete information about the product, some goods are assigned as label-controlled goods in Thailand.

This Announcement include following categories:

  • Household products
  • Personal products
  • Paper products and stationary
  • Electrical appliances and components (electric kettle, coffee machine, blender, food mixer, image screen, computer equipment, radio receivers, audio equipment, microphones, speakers, lamps (not including medical lamps), freezers (excluding medical freezers), electric stove, microwave ovens, electric iron, LED lamps)
  • Vehicles and equipment
  • Agricultural equipment
  • Construction materials
  • Other (e.g. sewing machines, mobile phones, watches, batteries used for watches, calculators or cameras).

This Announcement will come into force on 21 August 2022, 90 days after its publication.

 

Uzbekistan 乌兹别克斯坦

乌兹别克斯坦发布《家用电器强制性数字标识制度介绍》

2022年4 月2日,乌兹别克斯坦共和国内阁公布了关于引入家用电器强制性数字标记系统以防止家用电器非法进口、生产和销告的第 148 号决议以确保家用电器的合法流通。识别条形码需要放罝在产品上,并将用于跟踪目的。

家用电器和电子产品的标签分阶段进行:

a) 第一组: 吸尘器,洗衣机,冰箱和冰柜,电视和显示器- 从2022年4月15日开始强制标记;

b) 第二组: 家用燃气灶,抽油烟机,烤箱和炉灶,微波炉,熨斗,热水器- 从2022年8月1日开始强制标签;

c) 第三组: 热水器,空调,内置电动机的电器(榨汁机,搅拌机,咖啡研磨机,绞肉机),所有类型的灯具- 从2022年11月1日开始强制贴标。

制造商和进口商有权向运营商订购标记代码,并使用数字识别工具生产这些产品用于其包装。

In order to radically improve the mechanisms of accounting for the production, import and turnover of home appliances, to prevent illegal import, production and sale of home appliances, as well as to ensure the legal circulation of home appliances, the Cabinet of Ministers of Uzbekistan published Resolution of the Cabinet of Ministers “On the introduction of a system of mandatory digital marking of certain types of products” dated November 20, 2020 No 737 National information system for marking and tracking of products “Original mark” ”MAT) and designation of“ CRPT TURON ”LLC as the operator of this system.

Development of mechanisms for digital marking of household appliances in accordance with the Resolution of the Cabinet of Ministers No. 322 of May 20, 2021 “On measures to implement pilot projects to expand the list of products subject to mandatory digital marking” for information on the implementation of the pilot project.

To approve the proposal of the State Tax Committee and the Ministry of Finance of the Republic of Uzbekistan on the gradual introduction of a system of mandatory digital marking by means of identification, taking into account the division of household appliances into groups.

a) the first group – vacuum cleaner, washing machine, refrigerator and freezer, TV and monitor – from April 15, 2022;

b) the second group – household gas stove, kitchen hood, oven and stove, microwave, iron, water heater – from August 1, 2022;

c) the third group – water heaters, air conditioners, built-in electric home appliances (juicer, blender, mixer, coffee grinder, meat grinder), all types of lamps – from November 1, 2022.