澳大利亚 – 含磁铁玩具强制性安全标准 Australia – Mandatory Safety Standard for Toys Containing Magnets



2020年10月9日 | 产品安全

 

 

2020 年 8 月，澳大利亚竞争和消费者委员会更新了含有磁铁玩具的强制性标准。这些要求旨在降低儿童因吞食小型危险磁铁而遭 受严重伤害或死亡的风险。有关含磁铁儿童玩具的消费品安全标准（消费者保护公告 2010 年第 5 号）会被废止。

新的安全标准在联邦立法公报登记后的第二天生效。过渡期为 12 个月，在此期间，供应商可遵守新的安全标准或已废除的安全标 准。在 12 个月过渡期结束时，供应商只能遵守新的安全标准。

In August 2020, Australian Competition and Consumer Commission updated mandatory standard for toy containing magnets. These requirements are intended to reduce the risk of serious injury or death to children from swallowing small hazardous magnets. The Consumer Product Safety Standard for Children’s Toys Containing Magnets (Consumer Protection Notice No. 5 of 2010) was repealed.

The new safety standard comes into effect on the day after registration on the Federal Register of Legislation. A transitional period of 12 months will apply during which suppliers either may comply with the new safety standard or the repealed safety standard. At the end of the 12 month transitional period suppliers must comply with the new safety standard only.

 

磁性玩具要求 Magnetic toy requirements

 

日期 DATE

要求 REQUIREMENT

截至2021年8月28日
Up to 28 August 2021

磁性玩具应符合下列要求之一：
Magnetic toy shall comply with one of the following requirements:

AS/NZS ISO 8124.1:2019

玩具安全第 1 部分：与机械和物理性能相关的安全方面第 4.1 条（含修 改）和第 4.31 条（含修改）
Safety of toys Part 1: Safety aspects related to mechanical and physical properties Clause 4.1 with modifications and Clause 4.31 with modifications

EN 71-1:2014+A1:2018

玩具安全-第 1 部分：机械和物理性能第 4.23 条
Safety of toys – Part 1: Mechanical and physical properties Clause 4.23

ISO 8124-1:2018

玩具安全-第 1 部分：与机械和物理性能相关的安全方面第 4.1 条（含修 改）和第 4.31 条（含修改）
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties Clause 4.1 with modifications and Clause 4.31 with modifications

ASTM F963 – 17

玩具安全标准消费者安全规范第 4.38 条、第 8.5 条（含修改）和第 8.9 条 （含修改）
Standard Consumer Safety Specification for Toy Safety Clause 4.38, Clause 8.5 with modifications and Clause 8.9 with modifications

Australian/New Zealand Standard
AS/NZS ISO 8124.1:2002

玩具安全第 1 部分-与机械和物理性能相关的安全方面，修正案 2 第 4.28 条和修改后的相关条款
Safety of toys Part 1 – Safety aspects related to mechanical and physical properties and Amendment 2 Clause 4.28 and relevant clauses with modifications

从2021年8月29日起
From 29 August 2021

磁性玩具应符合以下要求之一：
Magnetic toy shall comply with one of the following requirements:

AS/NZS ISO 8124.1:2019

玩具安全第1部分：与机械和物理性能相关的安全方面第4.1条（含修改） 和第4.31条（含修改）
Safety of toys Part 1: Safety aspects related to mechanical and physical properties Clause 4.1 with modifications and Clause 4.31 with modifications

EN 71-1:2014+A1:2018

玩具安全-第1部分：机械和物理性能第4.23条
Safety of toys – Part 1: Mechanical and physical properties Clause 4.23

ISO 8124-1:2018

玩具安全-第1部分：与机械和物理性能相关的安全方面第4.1条（含修 改）和第4.31条（含修改）
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties Clause 4.1 with modifications and Clause 4.31 with modifications

ASTM F963 – 17

玩具安全标准消费者安全规范第4.38条、第8.5条（含修改）和第8.9条 （含修改）
Standard Consumer Safety Specification for Toy Safety Clause 4.38, Clause 8.5 with modifications and Clause 8.9 with modifications

 

查询 Enquiries

 

Hong Kong 香港
Mr. Leo Tong
+852 3192 1278
Leo.Tong@tuv.com

Shenzhen 深圳
Mr. Eason Zhao
+86 755 8268 1545
Eason.Zhao@tuv.com

Shanghai 上海
Mr. Nick Zhu
+86 21 6081 1696
Nick.Zhu@tuv.com

推荐文章

2024年9月国际市场准入资讯更新