2025年3月国际市场准入资讯更新
- 将71-76 GHz频段分配给主要类别的卫星固定业务 (空对地),将81-86 GHz频段分配给主要类别的卫星固定业务 (地对空)。
- 规定在根据第1条分配给固定卫星业务的频段内,业务保护和频率共享将按照国际电信联盟无线电通讯规则和建议书、CITEL建议书和其他适用于此事项的国家和国际规则的规定进行调整。
- To allocate the 71-76 GHz frequency band to the Fixed Satellite Service (space-to-Earth), with primary category and 81-86 GHz to the Fixed Satellite Service (Earth-to-space) with primary category.
- Establish that, in the frequency bands allocated by means of Article 1 to the Fixed Satellite Service, the protection of services and frequency sharing will be adjusted in accordance with the provisions of the Radiocommunication Regulations and Recommendations of the ITU, Recommendations of CITEL and other national and international regulations applicable in this matter.
- 行动无线中继系统
- 行动网络中继器
- 精密时序协议主设备
- VHF/UHF 无线电系统设备
- 无线电广播接收器
- ADSLx
- VDSLx
- 光纤 (单模)
- 光纤 (缆线)
- HF 无线电系统
- GSO VSAT/GSO 用户终端
- NGSO 终端/NGSO 集成网关
- Mobile Radio Trunking System
- Repeater for Cellular Network
- Precision Timing Protocol Grand Master Equipment
- VHF UHF Radio System Equipment
- Radio Broadcast Receiver
- ADSLx
- VDSLx
- Optical Fiber (Single Mode)
- Optical Fiber Cable
- HF Radio System
- GSO VSAT/GSO User Terminal
- NGSO Terminal/NGSO Integrated Gateway
- Walkie-Talkie (Family Radio System)
- Wireless LAN and Bluetooth
- Mobile Wireless Charger
- Remote Control
- Generic low-power transmitters (Non-Specific Short Range Devices)
- Wireless microphones
- Hearing-aid devices
- Wireless alarm systems
- 标签修改:
- 显示SAR值的义务:
- New Label design:
- Obligation to show SAR information:
- 修改原因: 更新安全标准以符合国际电气用品安全管理公约 (WTO/TBT、IECEE)
- 目标电器安全标准 (请见下图)
- 草案搜集截止至2025年4月10日
- Reason for Amendment: Updating safety standards to align with international electrical safety management conventions (WTO/TBT, IECEE).
- Targeted Electrical Safety Standards: (see above image)
- Deadline for Draft Feedback: Until April 10, 2025.
- Mobile phones
- Tablets
- Digital cameras
- Headphones
- Headsets
- Portable gaming consoles
- Portable speakers
- E-readers
- Keyboards
- Mice
- Portable navigation devices
- Earphones
- Laptops (to be implemented in April 2026)
- 获得认证的制造商 (或申请BIS认证的制造商) 可以进口零件用于出口。
- 需要自我声明和承诺,以确保这些组件不会在国内市场上销售。
- 必须保留记录以供审计。
- 制造商每年最多可进口200台研发。
- 这些设备不得进行商业销售,且使用后必须报废。
- 必须保留逐年纪录。
- Certified manufacturers (or those applying for BIS certification) can import components for export purposes.
- A self-declaration and undertaking are required, to ensure these components are not sold in the domestic market.
- Records must be maintained for audits.
- Manufacturers can import up to 200 units annually for R&D.
- These units must not be sold commercially and must be scrapped after use.
- Year-wise records must be maintained.
- New application refers to new regulation (Ministry of Industry regulation No. 7 year 2025)
- On going application
- Surveillance Schedule and Completion Target
- a) The surveillance scheduling will follow provisions in SNI old regulation and/or LSPro scheme, which allows ±3 months from surveillance schedule that stated in the certificate.
- b) Considering the estimated project completion and issuance of Certification Body/LSPro and Lab appointments, we will limit audit and market sampling activities until March 2025. Surveillance schedule that can be conducted until March 2025 (following the provisions in point 3a) will be contacted separately by our team for further arrangement.
- Certificate Validity
- a) Certificates that have completed surveillance in 2025 (and previous years) before the appointment for Certification Body/LSPro and Laboratory are issued, will remain valid until the next surveillance.
- b) Certificates which surveillance scheduled after the appointment for Certification Body/LSPro and Laboratory are issued, cannot conduct surveillance and will be terminated based on the maximum tolerance for surveillance.
- 提高最低能源性能标准
- 改变可注册模型的范围
- 列出了不符合附表 1 中新要求的注册类型清单
- 允许在 2025 年 10 月 4 日之前已进口或在澳洲生产的现有库存在 2030 年 10 月 3 日之前供应给市场

资讯 / 电信 ITE / Telecom
Aegentina阿根廷
国家通信管理局 (ENACOM) 根据第1188/2024号决议分配固定卫星服务的新频段
国家通讯机构 (ENACOM) 于 2024 年 12 月 3 日发布了第 1188/2024 号决议。
National Body of Communications (Ente Nacional de Comunicaciones (ENACOM)) published Resolution 1188/2024 on December 3, 2024.
Brazil巴西
巴西ANATEL发布第772号决议,关于频段分配、目的地和分布的计划
第772号决议是ANATEL于1月22日发布的新标准,废除了旧的第759号决议。它于2025年2月3日生效。
该标准是巴西频段分配、目的地和分布的计划,它定义了巴西每个频段的应用和业务,类似于FCC 2.106。
第772号决议带来了一些频段的分配和使用的实施和变化,只有在第680号决议的技术规格表中定义的具有替代发射限值的受限辐射设备可用的无线电频段中的一些频段的变化。
然而,这些变化只影响部分频段,并且绝大多数是很少使用的频段,而没有改变测试技术要求。因此,WWAN, WLAN,蓝牙,Zigbee, LoRa和许多其他将不会受到影响。
Anatel New Resolution No. 772 is a new standard issued by ANATEL on January 22, revoking the old Resolution 759. It came into force on February 03rd, 2025.
This standard is the plan for the assignment, destination and distribution of frequency bands in Brazil, which defines the application and services intended for each frequency band in Brazil, analogous to FCC 2.106.
Resolution 772 brought implementations and changes in the allocation and use of some frequency bands, in addition to some changes in bands in the RADIO FREQUENCY BANDS USABLE FOR RESTRICTED RADIATION EQUIPMENT WITH ALTERNATIVE EMISSION LIMITS, defined in the technical specifications table of Resolution 680.
However, these changes only affect some bands, and the vast majority of which are little-used bands, without changing testing technical requirements. So, WWAN, WLAN, Bluetooth, Zigbee, LoRa, and many others will not be impacted.
Brazil巴西
ANTEL发布新2015法案
近期ANATEL发布了新的2105法案。该法规更新了WWAN设备的技术要求,修订了法案3151 (ETA (WWAN) 设备的技术要求,除了移动电话) 和法案3152 (移动电话的技术要求)。本法将于2025年8月13日生效。
Recently, ANATEL published the new Act 2105. This regulation updates the technical requirements for WWAN devices, amending Acts 3151 (Technical Requirements ETA (WWAN) devices, except Mobiles) and 3152 (Technical Requirements for Mobile Phones). This Act will come into effect on August 13th, 2025.
With this update, new certification requirements have been incorporated for equipment employing emerging technologies aimed at the Internet of Things (IoT). Among the innovations introduced, notable highlights include compliance assessments for devices utilizing technologies such as 5G NB-NTN (Narrow Band Non-Terrestrial Networks), 5G RedCap (Reduced Capability), and 4G LTE Cat 1bis. In addition to incorporating these new technologies, Act No. 2105/2025 has also updated the normative references for the certification of mobile phones and ETAs, ensuring that laboratory testing complies with the latest versions of the standards established by 3GPP.
Egypt埃及
2025 年 1 月 1 日起须透过 NTRA 数字服务平台进行国际行动装置标识符 (IMEI) 注册
埃及国家电信管理局 (NTRA) 要求从2025年1月1日起通过 NTRA 数字服务平台进行国际移动设备识别码 (IMEI) 注册。2025年1月18日,NTRA 向手机制造商和进口商发送了指示,以方便在数字服务平台上进行 IMEI 注册。
The National Telecom Regulatory Authority (NTRA) of Egypt required International Mobile Equipment Identity (IMEI) registration through the NTRA Digital Service Platform starting January 1, 2025. On January 18, 2025, NTRA sent instructions to mobile phone manufacturers and importers to facilitate IMEI registration on the Digital Service Platform.
India印度
印度TEC 宣布部分产品豁免提交测试报告
2025年1月1日,印度通信工程中心 (TEC) 发布通知,宣布以下产品在MTCTE规范下可豁免提交测试报告,豁免期限至2025年6月30日或另行通知为止。
The India Telecommunication Engineering Centre (TEC) published Notification on generic exemption from submission of test reports for several groups of products listed below under MTCTE until 30 June 2025 or further notice:
Indonesia印度尼西亚
印度尼西亚对自2025 年 6 月 2 日起对影音类产品实施强制SNI认证
印度尼西亚工业部颁布了新法规,根据工业部长关于强制实施印度尼西亚音讯视频国家标准的 2024 年第 75 号法规,要求印度尼西亚音视频设备国家标准 – SNI IEC-62368-1:2014 取代之前的法规。
第 75/2024 号条例于 2025 年 6 月 2 日生效。
The Indonesian Ministry of Industry has issued the new regulation which mandates the Indonesian National Standard for audio video device – SNI IEC-62368-1:2014, under the Minister of Industry Regulation No. 75 of 2024 on the Mandatory Implementation of Indonesia National Standard for Audio Video (“Regulation 75/2024”) to replace the previous regulation.
Regulation 75/2024 applies effectively on 2 June 2025.
Indonesia印度尼西亚
SDPPI 已经更名为DJID,将影响证书格式
Kementerian Komunikasi dan Informatika (KOMINFO) 现更名为Kementerian Komunikasi Digital (KOMDIGI); SDPPI更名为DJID (dirktorat Jenderal infrastructure Digital)。新标志将用于所有官方文件和通讯中。从2025年1月20日起,将颁发带有新KOMDIGI标志的证书。新的证书编号格式将与证书上的QR码一起实施,现在将包含新的品牌。
Kementerian Komunikasi dan Informatika (KOMINFO) is now Kementerian Komunikasi dan Digital (KOMDIGI) and SDPPI changing to DJID (Direktorat Jenderal Infrastruktur Digital). The new logo will be used in all the official documents and communications.
Indonesia印度尼西亚
印度尼西亚发布 2025 年第 2 号通讯与数字部长 DJID 条例,许可RLAN/SRD频段
印度尼西亚通信和数字部 (KOMDIGI) 发布了2025年第2号部长法令,根据RLAN(5925-6425MHz)/SRD 设备的类别许可证和技术标准规范无线电频谱。该条例于2025年1月15日正式实施。 此次更新旨在为在印度尼西亚按类别许可证运营的电信和无线电频率设备提供更明确的技术和操作指南。
The Indonesian Ministry of Communication and Digital Affairs (KOMDIGI) has issued Regulation No. 2 of 2025, revising the previous Ministerial Regulation No. 2 of 2023 regarding the use of radio frequency spectrum based on a class license. This update aims to provide clearer technical and operational guidelines for telecommunications and radio frequency devices that operate under class licenses in Indonesia.
Indonesia 印度尼西亚
印度尼西亚公布最新的认可外国测试实验室清单
印度尼西亚通讯与数字化(KOMDIGI)2025年2月发布了KEPMEN KOMDIGI NO 13 TAHUN 2025,确认了最新的DJID (SDPPI)设备认证的认可外国测试实验室清单。
该清单自2025年1月1日起生效,有效期至2026年12月31日。
Referring to circular letter No.B-618 /DJSDPPI.5/SP.04.06/10/2024 regarding Re-registration of SDPPI Recognized Foreign Testing Labs, DJID would like to inform you that The Decree of the Minister of Communications and Digital Affairs on the Recognition of Foreign Testing Labs No. 13 of 2025(KEPMEN KOMDIGI No. 13 Tahun 2025) was established on January 15, 2025.
The Decree of the Minister of Communications and Digital will be valid from January 1, 2025 until December 31, 2026.
Japan日本
MIC对于修改《终端设施规定》中规定的绝缘电阻规定已于2025年1月1日生效。
总务省 (MIC) 修改《终端设施规定》中规定的绝缘电阻规定,以符合现行国际标准 IEC62368,已于2025年1月1日生效。
此外,针对与电信线路设施 (网络) 互连使用的终端设备,对符合性标志的终端设备的技术标准分类将从A至F六类重新组织为G、H、P和Q四类。
日文版修正案文本可在此处查阅。
Ministry of Internal Affairs and Communications (MIC) amended the insulation resistance provisions specified in the Regulations for Terminal Facilities to comply with the current international standard, IEC62368. The revisions entered in force on 1 January, 2025.
In addition, the classification of conformity-marked terminal equipment to the technical
standards will be reorganized from six categories, A through F, to four categories, G, H, P, and Q, regarding the terminal equipment used by interconnection with telecommunications line facilities (networks).
The texts of the amendments in Japanese are available here.
Malaysia马来西亚
马来西亚 SIRIM 对 IPv6 蜂窝设备的临时批准不会延长
马来西亚标准与工业研究所 (SIRIM) 于2025年2月10日宣布,从2025年7月10日起,支持IPv6和LTE蜂窝设备的产品的新型批准申请和证书更新将强制要求提供IPv6报告。IPv6的本地测试实验室现在是能满足测试的,因此IPv6设备的临时批准将于2025年7月10日结束,不会延期。
Malaysia SIRIM had announced that interim approval for IPv6 cellular equipment without a WiFi interface or IPv6 equipment over other mediums (e.g: fiber optic etc. except Ethernet LAN), currently in place, which ends on 10th July 2025, will not be extended. Full approval shall be granted after 10th July 2025, provided that applicants submit a complete IPv6 test report, including for non-Wi-Fi-enabled products.
Therefore, the renewal of the Certificate of Conformity (CoC) will not be permitted unless an IPv6 test report is submitted for SIRIM’s evaluation. Full approval will only be granted if IPv6 over cellular interfaces or other applicable mediums fully meets IPv6 requirements.
For Wi-Fi-enabled products, testing may be conducted at any IPv6 accredited laboratory.
Meaning that, previously those Cellular only product are accepted interim without IPV6 test report.
Now all those product must have IPV6 test report to apply type approval.
And renewal for previous accepted product will need to have IPV6 test report upon renewal.
Malaysia马来西亚
马来西亚发布2025年最新电信设备公告摘录
马来西亚MCMC于2025年1月20日发布最新电信设备公告摘录CLASS ASSIGNMENT NO. 1 OF 2025。
Malaysian Communications and Multimedia Commission (MCMC) issued CLASS ASSIGNMENT NO. 1 OF 2025.
Class assignment confers rights on any person to use the frequency (ies) for a list of devices. The usage of devices under class assignment is subject to conditions provided in the class assignment issued under section 169 of CMA. No fee shall be payable for class assignment. A class assignment is valid until it is cancelled by MCMC.
Examples of Class Assignment:
No application is required for Class Assignment. The devices must be certified by MCMC or its registered certifying agency.
Mexico墨西哥
墨西哥 IFT 发布针对低功耗装置的 IFT-016-2024条例
墨西哥联邦电信协会 (IFETEL) 于2025年2月7日发布IFT-016-2024条例,概述在30 MHz至3 GHz范围内使用频段的低功率无线电通信设备 (LPD) 的规格、限制和测试方法。
该法规将于2025年11月4日开始强制,届时认证机构 (CBs) 和测试实验室可以进行符合性评估,只要它们具有IFT或具有相应IFT授权的认可机构所需的认可。
The Instituto Federal de Telecomunicaciones (IFETEL) of Mexico published Disposición Técnica IFT-016-2024 on February 7, 2025. Disposición Técnica IFT-016-2024 outlines specifications, limits, and test methods on low-power radiocommunications devices (LPDs) that use frequency bands within the 30 MHz to 3 GHz range.
This regulation applies to various low-power devices, including:
Exceptions include frequency bands identified for emergency, safety, search or rescue communications; protected spectrum in the National Frequency Allocation Table (NFAT); and applications inconsistent with band use according to the NFAT. The scope does not include frequency hopping and digital modulation radio communications devices under IFT-008 (NOM-208) that operate in the 902-928 MHz, 2400-2483.5 MHz and 5725-5850 MHz frequency bands.
The Disposición Técnica will enter into effect 270 days after publication, on November 4, 2025. Certification Bodies (CBs) and Testing Labs may carry out conformity assessment starting November 4, 2025, as long as they have the accreditation needed by IFT or an Accreditation Body with corresponding IFT authorization. They may begin accreditation and authorization procedures starting February 8, 2025.
Certificates of Homologation (CoHs) that have been issued according to the Guidelines for granting Authorization Certificates for secondary use of frequency bands of the radioelectric spectrum will remain valid until they expire and will not be subject to certification monitoring compliance. Devices with a CoH under the new Disposición Técnica must follow the parameters outlined in IFT-016-2024. LPDs operating outside of the 30 MHz-3 GHz and receiving a Type B CoH must observe technical and operating parameters described in IFT-016-2024. Exceptional cases are applied to bands identified as protected spectrum for emergency, safety, search or rescue communications, and whose application is not consistent with use outlined in the NFAT.
Mexico墨西哥
墨西哥 IFT 发布适用于 WLAN 装置的 IFT-017-2023条例
墨西哥联邦电信协会 (IFETEL) 于2025年2月10日发布Disposición IFT-017-2023,该标准规定了在无许可频段5150-5250 MHz、5250-5350 MHz、5470-5600 MHz、5650-5725 MHz、5725-5850 MHz和5925-6425 MHz使用无线局域网和/或使用数字调制技术的无线电通信设备的技术规范。
该条例将在2025年11月7日生效。一旦生效,针对数字调制设备和混合设备的数字调制部件的5725-5850 MHz频段的规范和测试方法将在Disposición IFT-008-2015中废止。在2025年11月7日之前已启动批准程序的在以下任何或所有频段 (5150-5250 MHz, 5250-5350 MHz, 5470-5600 MHz, 5650-5725 MHz和5925-6425 MHz) 运行的设备将根据B类或C类批准程序进行解决。认可机构在收到IFT的授权后,可于2025年2月11日开始授权合格评定机构的程序。
在2025年11月7日之前颁发的在以下任何或所有频段 (5150-5250 MHz, 5250-5350 MHz, 5470-5600 MHz, 5650-5725 MHz, 5725-5850 MHz和5925-6425 MHz) 运行的产品的批准证书将继续有效,直到其到期,并将接受审查和验证程序。在2025年11月7日之前发布的在5725-5850 MHz频段运行的产品的符合性证书 (CoC) 将继续有效,直到其失效日期,并且将受到合规性监控,但5725-5850 MHz频段的数字调制设备和混合设备部分除外。
The Instituto Federal de Telecomunicaciones (IFETEL) of Mexico published Disposición Técnica IFT-017-2023 on February 10, 2025, which establishes technical specifications for devices that use WLAN and/or radiocommunication equipment using digital modulation technique operating in unlicensed frequency bands 5150-5250 MHz, 5250-5350 MHz, 5470-5600 MHz, 5650-5725 MHz, 5725-5850 MHz and 5925-6425 MHz.
Disposición Técnica IFT-017-2023 comes into effect 270 days after publication, on November 7, 2025. Once in effect, specifications and test methods for the 5725-5850 MHz band are repealed for digital modulation equipment and digital modulation parts of hybrid equipment in Disposición Técnica IFT-008-2015.
Equipment operating in any or all of the following frequency bands (5150-5250 MHz, 5250-5350 MHz, 5470-5600 MHz, 5650-5725 MHz, and 5925-6425 MHz) that have had approval procedures initiated prior to November 7, 2025, will be resolved according to Type B or Type C approval procedures.
Accreditation Bodies may begin procedures for their authorization of Conformity Assessment Bodies starting February 11, 2025, upon receiving authorization from IFT.
Prior approval of complementary products needed for EBP tests will be required after 365 days from Disposición Técnica IFT-017-2023’s entry into force.
Approval certificates issued prior to November 7, 2025 for products operating in any or all of the following bands (5150-5250 MHz, 5250-5350 MHz, 5470-5600 MHz, 5650-5725 MHz, 5725-5850 MHz and 5925-6425 MHz) will continue to be valid until their expiration date, and will be subject to review and verification procedures. Certificates of Conformity (CoCs) for products operating in the 5725-5850 MHz band that are issued prior to November 7, 2025, will continue to be valid until their expiration date, and will be subject to compliance monitoring with the exception of digital modulation equipment and hybrid equipment part of the 5725-5850 MHz band.
Morocco摩洛哥
摩洛哥ANRT宣布新决定,包括标签修改以及显示SAR值的义务
摩洛哥ANRT于2025年1月20日公布了一项新的核准决定,主要修改如下:
对于标签大小、字体和文本大小没有具体的说明。标签以清晰、易读、不可磨灭的方式贴在设备上。如果由于设备的尺寸而无法进行此类操作,则可以将其贴在随附的文件上,在其包装上或通过电子标签允许查看。
对于任何批准或授权设备,其发射功率大于20 mW, 且使用时距离用户最多20厘米时, 必须在设备或随附文件 (用户说明、用户手册等) 或其包装或要显示的电子标签内容 (如存在) 上以清晰易读的方式标明比吸收率 (SAR) 的信息,作为主要技术特征。这项义务从2025年5月1日起生效。
Morocco ANRT announced a new decision, including new label design and the obligation to show SAR information.
There are no specific instructions for label size, font and text size. The label is affixed to the device in a clear, legible and indelible manner. If this is not possible due to the size of the device, it may be affixed to the accompanying documentation, on its packaging or through an electronic label allowing viewing.
For any approved or approved equipment, whose transmission power exceeds 20 and which is designed to be used at a distance not exceeding 20 from the user, the information relating to the Specific Absorption Rate (SAR) must be indicated as a main technical characteristic and in a legible and clear manner on the equipment itself or on the accompanying documents (brochure or user manual, etc.) or on the packaging or in the content of the electronic label that enables this information to be displayed (if such a label is present). This obligation also applies to any market offer, advertising or sale via the Internet of this equipment.
This commitment will come into effect as of May 1, 2025.
South Korea韩国
韩国发布《简易无线电台、太空站、地球站、无线电波探测及其他无线电设备用无线电设备技术标准》修正案草案
[法规草案] 本草案规定了在11GHz至14GHz频段内运作在1100公里至1300公里高度之间的低轨道卫星通讯地球站无线电设备的技术要求。它是为了低轨道卫星通讯服务无线电波的安全使用以及保护人类的健康或安全。
South Korea released draft amendment of “Technical standards for radio equipment for simple radio stations, space stations, earth stations, radio wave detection and other radio equipment”.
This draft specifies technical requirements for radio equipment of earth stations communicating with low-orbit satellites operating at altitudes between 1,100 km and 1,300 km in the 11 GHz to 14 GHz frequency bands. It is for safe use of radio waves for low-orbit satellite communication services and for protection of human health or safety.
South Korea韩国
关于修订7项电器安全标准的行政通知(草案)
[法规草案] 韩国技术和标准局 (KATS) 于2025年2月10日发布草案,以修订电气用品安全标准,并就修订目的及主要内容,事先听取业界及公众意见。
The Korean Agency for Technology and Standards (KATS) published a draft on February 10, 2025, to amend electrical safety standards in accordance with Article 5, Paragraph 3; Article 15, Paragraph 4; and Article 23, Paragraph 4 of the Electrical Appliances Safety Control Act. This revision aims to gather opinions from industry stakeholders and the public regarding the purpose and key contents of the amendments. In compliance with Article 46 of the Administrative Procedures Act, the notice is issued as follows:
South Korea韩国
韩国延后实施行动和智能型装置的充电和数据传输方法的USB Type-C技术法规
2024年11月8日韩国科学与信息通讯技术部 (MSIT) 公布关于广播和通讯设备 (包括行动和智能型装置) 充电和数据传输方法的USB Type-C技术法规,共有13项装置在连接充电或同时充电和数据传输时必须配备 USB Type-C并符合RRA SDoC认可。原定前12项产品预计2025年2月14日起实施,第13项笔电预计2026年4月起实施,但该规定将延期执行,待韩国无线电研究所RRA进一步通知。
On November 8, 2024, the Ministry of Science and ICT (MSIT) of South Korea announced USB Type-C technical regulations for charging and data transmission methods applicable to broadcasting and communication equipment, including mobile and smart devices.
The regulations require the above 13 types of devices to be equipped with USB Type-C ports and comply with the RRA SDoC approval when connecting for charging or simultaneous charging and data transmission. Initially, the first 12 product categories were scheduled for implementation starting February 14, 2025, while the 13th category—laptops—was set to be enforced from April 2026. However, the implementation has been postponed, pending further notice from the National Radio Research Agency (RRA) of South Korea.
Vietnam越南
越南发布有关 ICT 产品认证和声明的新法规草案。
[法规草案] 新法规一旦获得批准并实施,它将取代现行的 30/2011/TT-BTTTT 号通函。
该通告草案将于 2025 年 2 月 25 日前接受公众意见征询。
Vietnam publishes new draft Regulation on certification and declaration for ICT products. Once it’s approved and implemented, it will replace current Circular No. 30/2011/TT-BTTTT
The draft circular recieves public comments till Feb-25 of 2025.
India印度
TEC正式公布电信设备的强制性检测和认证(MTCTE)第VI期的生效日期及其涵盖的产品清单
2025年3月4日,印度电信工程中心 (TEC) 正式公布电信设备的强制性检测和认证(MTCTE)第VI期的生效日期及其涵盖的产品清单。这一新阶段将从2025年8月24日起强制实施。在此日期之后,未经MTCTE批准,OEM制造商将不允许进口,销售或分销这类电信设备。
The Telecom Engineering Centre (TEC) has officially announced the effective date and list of products covered under MTCTE Phase VI.
This new phase will become mandatory from August 24, 2025. After this date, OEMs will not be allowed to import, sell, or distribute telecom equipment without MTCTE approval.
第6阶段强制产品列表
Products Covered Under MTCTE Phase VI
S.No. | Telecom Equipment
产品名称 |
Essential Requirements (ER) No & Name
标准要求(ER)号码及英文名称 |
1 | Cellular Customer Premises Equipment
蜂窝网络用户驻地设备 |
TEC40012408 (Cellular Customer Premises Equipment) |
2 | Fixed Wireless Phone with VOICE and DATA Facility
固定无线电话 (语音+数据双模) |
TEC10012409 (Fixed Wireless Phones) |
3 | Fixed Wireless Phone with Voice Facility only
固定无线电话 (纯语音版) |
TEC10012409 (Fixed Wireless Phones) |
4 | Storage Area Network (SAN) Switch
存储区域网络交换机 |
TEC37942410 (LAN Switch) |
5 | Fabric Interconnect Switch
矩阵互联交换机 |
TEC37942410 (LAN Switch) |
6 | Network Security Management Equipment
网络安全管理设备 |
TEC34732410 (IP Security Equipment) |
7 | Network Security Analytics Equipment – Managed
网络安全分析设备 (托管式) |
TEC34732410 (IP Security Equipment) |
8 | Network Security Analytics Equipment – Unmanaged
网络安全分析设备 (非托管式) |
TEC34732410 (IP Security Equipment) |
9 | Content Security Equipment
内容安全设备 |
TEC34732410 (IP Security Equipment) |
10 | DDoS Protection Equipment
DDoS防护设备 |
TEC34732410 (IP Security Equipment) |
11 | Malware Analysis Equipment
恶意软件分析设备 |
TEC34732410 (IP Security Equipment) |
12 | Web Application Firewall
网页应用防火墙 (WAF) |
TEC34732410 (IP Security Equipment) |
13 | NGSO User Terminals
非静止轨道用户终端 |
TEC57282501 (Satellite Communication Equipment) |
14 | NGSO Integrated Gateway
非静止轨道综合网关 |
TEC57282501 (Satellite Communication Equipment) |
电池 Batteries
China Taiwan 中国台湾
2026年7月1日起实施「应施检验放置型锂储能装置商品之相关检验规定」
鉴于储能系统中使用的锂离子电池存在热失控风险,BSMI 已将固定式锂电池储能设备纳入强制性检验范围,以保障使用者安全。表列商品检验方式采型式认可逐批检验或验证登录双轨并行,详情请参考此链接。
To achieve net-zero carbon emissions by 2050, it is expected that renewable energy power generation equipment and energy storage systems will gradually enter households. Due to the risks associated with thermal runaway in lithium-ion batteries used in energy storage systems, the BSMI add stationary lithium battery storage appliances into the mandatory inspection scope. Two alternative conformity assessment procedures are made available for the choice of applicants, i.e. Registration of Product Certification (RPC) or Type-Approved Batch Inspection (TABI).
For details, please see this link.
家用电器 House Appliances
Australia澳大利亚
澳大利亚和新西兰标准局发布AS/NZS 2040.1:2021 电动洗衣机性能标准的修正案
[法规草案] 2024 年 12 月 20 日,澳大利亚和新西兰标准局编制了标准 AS/NZS 2040.1:2021 的修正案 – DR AS/NZS 2040.1:2021 Amd 1:2024
本标准规定了用于确定立法范围内的家用和类似用途的电动洗衣机性能特征的测试程序和最低性能标准。意见征询截止日期为 2025 年 2 月 21 日。
On December 20, 2024, the Standards Australia & New Zealand prepared draft amendment 1 to Standard AS/NZS 2040.1:2021. — DR AS/NZS 2040.1:2021 Amd 1:2024
This Standard specifies test procedures and minimum performance criteria for determining the performance characteristics of electric clothes washing machines intended for household and similar use that are within the scope of the relevant legislation.
Closing date for comments is on February 21, 2025.
Brazil巴西
INMETRO对冰箱和类似器具的综合法规进行修订
2024 年 12 月 11 日,国家计量、质量和技术局 (INMETRO) 发布了 2024 年 12 月 10 日 Portaria 736 号法规,对 2021 年 8 月 2 日 Portaria 332 号法规 (冰箱和类似器具的综合法规) 进行了修订,对 Portaria 332/2021 号法规的修改于同日生效。
该法令修订了冰箱及类似设备的符合性评估要求,主要涉及能效标签、技术规范和测试要求等方面的更新。
On December 11, 2024, the National Institute of Metrology, Quality and Technology (INMETRO) issued Portaria 736 of December 10, 2024, amending Portaria 332 of August 2, 2021, the consolidated regulation for refrigerators and similar appliances. The changes to Portaria 332/2021 enter into force on the same day.
The amendment revises the conformity assessment requirements for refrigerators and similar equipment, mainly involving updates to energy efficiency labels, technical specifications and testing requirements.
India印度
印度发布《冷冻设备 (质量控制) 修正案,2025年》
2025年1月16日 DPIIT公布《Refrigerating Appliances (Quality Control) Amendment Order, 2025》,修订内容如下:
经认证ISI mark的制造商进口零件豁免:
用于研究与开发 (R&D) 目的的豁免:
The Ministry of Commerce and Industry has introduced the 《Refrigerating Appliances (Quality Control) Amendment Order, 2025》, which came into effect on January 16, 2025, upon its publication in the Official Gazette
Key Requirement:
All refrigerating appliances must comply with their respective Indian Standards and bear the Standard Mark (BIS Certification) under Scheme-I of Schedule II of the BIS (Conformity Assessment) Regulations, 2018.
Key Amendments in the Order:
Exemption for Imported Components by Certified Manufacturers:
Exemption for Research & Development (R&D) Purposes:
These changes aim to support exports and innovation while ensuring compliance.
Indonesia印度尼西亚
印度尼西亚发布2025年第7号工业部长法令,家用电器产品SNI认证迎来新规则
工业部发布了关于强制实施家用电子产品印度尼西亚国家标准 (SNI) 认证的新法规 (工业部法规2025年第7号)。该法规取代了空调、洗衣机、冰箱、水泵、电熨斗、厨房机械和加热液体的 SNI 法规。
新法规将于2025年7月24日生效,并于2026年7月24日实施。
Ministry of Industry has issued new regulation (Ministry of Industry regulation No. 7 year 2025) concerning the Mandatory Implementation of the Indonesian National Standard (SNI) Certification for Household Electronics. This regulation is replacement of the SNI Regulation of Air Conditioning, Washing Machine, Refrigerator, Water Pump, Electric Iron, Kitchen Machine, and Heating Liquid.
The new regulation will come into force on July 24th 2025 and will be implemented on July 24th 2026.
Highlights:
The new application following this new regulation can be started on July 24th 2025 and/or after we received appointment from the Ministry. Currently, the Ministry has not announced the estimation of the appointment release date.
All projects that currently still on-going (new certification, additional family, additional model, and surveillance) which refer to the old regulation, must be completed before the new appointment released. If it is not completed, the certification process needs to be restarted by referring to the new regulation.
Saudi Arabia沙特
SASO发布家用冰箱和洗衣机的能效、测试及标签要求的2025版标准草案
[法规草案] 沙特标准与质量组织 (SASO) 发布了针对家用冰箱和洗衣机的能源性能、测试及标签要求的新版草案标准Draft SASO 2892:2025和Draft SASO 2885:2025。
公众咨询期为发布后60天。建议的通过和生效日期是在官方宪报公布之日起2年后。
The Saudi Standards and Quality Organization (SASO) has published new draft standards for energy performance, testing and labeling requirements for household refrigerators and washing machines, Draft SASO 2892:2025 and Draft SASO 2885:2025.
The final date for comments is 60 days from the date of notification. The proposed adoption and entry into force date is 2 years after the date of publication in the official gazette.
South Korea 韩国
韩国能源厅发布 [能源效率等级制度] 各能效管理设备适用标准生效日期信息
2025年1月2日,韩国能源厅发布了一份关于能源效率法规管控范围内的各类产品的能效标准实施日期的通知。制造商在创建能效标签时必须参考这份通知中对应的产品标准实施日期。
以电冰箱为例:能效标签上的0000.00.00需要更改为2021.10.01
On 02 January 2025, Korea Energy Agency published Efficiency Rating System Information on the effective date of application standards for each item of efficiency management equipment. Manufacturers must refer to the implementation date of the product standards in this notice when creating energy efficiency labels.
Taking refrigerators as an example, 0000.00.00 must be changed to 2021.10.01 on the energy efficiency labels.
China Taiwan 中国台湾
「电冰箱容许耗用能源基准与能源效率分级标示事项、方法及检查方式」 修正草案
[法规草案] 2025年2月10日,台湾BSMI向WTO提交了「电冰箱容许耗用能源基准与能源效率分级标示事项、方法及检查方式」 修正草案。
公众咨询期截至2025年4月11日,拟议生效日期: 2027年1月1日。
Taiwan released draft announcement for amendment to Requirements on Minimum Energy Performance Standard and Energy Efficiency Rating Labelling and Inspection for Refrigerators
Proposed date of adoption: To be determined
Proposed date of entry into force: 1 January 2027
UAE 阿联酋
阿联酋发布电热水器能源效率标签标准UAE.S 5010-4草案
[法规草案] 该草案标准规定了储水式电热水器和即热式电热水器的能源效率标准和测试要求。
该标准适用于功率小于或等于70千瓦的热水器,以及容量不超过2000公升的各类热水器产品。
UAE released draft standard – Labeling – Energy Efficiency Label for Electrical Appliances UAE.S 5010-4 Part 4 – Electrical water heater.
This Standard specifies the Energy Performance Standard and testing requirements of electric storage water heaters and Instantaneous electric water heaters.
It shall apply to water heaters with power under or equal to 70 kW and to products with a capacity up to 2,000 liters for all types of water heaters.
India印度
印度发布《空调及其相关零件、全封闭压缩机和温度感测控制器 (质量控制) 修正令,2025 年》
2025年2月11日,DPIIT 更新2019年版QCO 至《the Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2025》。
针对空调和冷冻设备制造商,自2025年版修正案生效日一年之内,容量超过7000瓦 (2吨) 的密闭式压缩机延长一年豁免直至2026年2月11日后再纳入。
On 11 February 2025, DPIIT updated the 2019 version QCO to 《the Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2025》. It shall be noted that nothing in this order shall apply to Hermetic Compressors of more than 7000 W (2TR) capacity for one year from the date of commencement of the Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Amendment Order, 2025 to the manufacturers of Air conditioning and Refrigeration equipment and related parts.
灯具 / LED Luminaiaries/LED
Australia澳大利亚
GEMS《温室效应及能源最低标准 (一般照明用白炽灯) 决议2024》
GEMS于2024年12月23日发布《温室效应及能源最低标准 (一般照明用白炽灯) 决议2024》。
除了 2024 年决议附表 1 所列的型号,供货商无需立即采取行动,可继续销售根据 2016 年决议注册的现有白炽灯型号。新的要求仅在新的白炽灯型号需要注册,或现有白炽灯型号注册到期且需要注册才能销售时才会生效。
GEMS released the 《Greenhouse and Energy Minimum Standards (Incandescent Lamps for General Lighting Services) Determination 2024 》on December 23, 2024. From October 4, 2025, tungsten filament, carbon filament, and halogen incandescent bulbs that are in the scope of the regulations must meet and register under this new determination.
This 2024 determination:
Increases Minimum Energy Performance Standards.
Changes the scope of models that can be registered.
Includes a list of registered models that will not meet the new requirements under Schedule 1. These model registrations will expire on October 3, 2025, and they will no longer be approved for registration in Australia.
Sets out grandfathering arrangements, allowing existing stock already imported or manufactured in Australia prior to October 4, 2025, to be supplied to the market until 3 October 2030, provided they meet the grandfathering provisions.
No immediate action is required by suppliers to continue selling existing incandescent models registered against the 2016 determination – except for those listed in Schedule 1 of the 2024 determination. The new requirements only take effect when a new incandescent model needs to be registered, or when an existing incandescent model’s registration expires and it needs to be registered for sale.
Suppliers with a registration that is about to expire or are considering registering new models between October 4, 2024, and October 3, 2025, need to consider:
Whether they register the models under the 2024 or 2016 determination (subject to eligibility), or
when to discontinue models, if the model cannot be supplied after October 3, 2025.
Egypt埃及
埃及发布标准 ES: 7825「灯具 – 一般要求和测试」草案
[法规草案] 埃及标准 ES 7825 的草案规定了灯具的一般要求,包括电源电压高达 1000V 的电光源。
这些声明可能要求,对于此类商品,先前的标准可以继续适用于生产,直到规定的日期之后,新标准应适用。
另外值得一提的是,该标准草案在技术上与 IEC 60598-1/2020 相同。
This draft of Egyptian standard ES 7825 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1000 V. The requirements and related tests of this document cover classification, marking, mechanical,construction, electrical construction and photobiological safety.
The statements may require that for such products, the previous standard may continue to apply to production until a defined date after which the new standard shall apply.
Worth mentioning is that this draft standard is technically identical with IEC 60598-1/2020
能源效率要求 Energy Efficiency Requirements
Malaysia马来西亚
马来西亚颁布EECA节能新规,并于2025年1月1日实施
2024 年能源效率与保护法案 (EECA) 颁布,旨在规范马来西亚的能源高效消耗和保护。
该新法案规定,用能产品的制造商和进口商必须向能源委员会注册。涉及的产品必须满足基本能源性能要求,加贴能源效率等级卷签,并支持在市场上使用节能产品。
The Energy Efficiency and Conservation Act (EECA) 2024 was enacted to regulate the efficient consumption and conservation of energy in Malaysia.
This new act has specified that manufacturers and importers of energy-using products must register with the Energy Commission. The products involved must meet basic requirements for energy performance, place an energy efficiency rating label, and support the use of energy-saving products in the market.
其他 / 多主题产品 Others / Products with Multiple Subjects
澳大利亚 Australia
澳大利亚/新西兰官方常委会 (SCO) 发布了一份关于含有插脚的插拔电源、电池充电器和类似设备的信息公告
该公告目的是防止对部分设备外壳配备美式或日式以及欧式插头插脚的设备进行认证。
SCO指出,相关的国家标准 AS/NZS 3112 “其批准和测试规范–插头和插座–插座 “将进行修订,以明确有关设备中使用的可拆卸插头部分的要求。
所有相关产品设备的制造商和供应商都应关注该公告以及澳大利亚和新西兰即将更新的要求。
The Standing Committee of Officials (SCO) issued an information bulletin regarding plug-pack type power supplies, battery chargers, and similar equipment with integral pins in Australia/New Zealand.
The aim of the bulletin is to prevent certification of devices equipped with integral plug pins of US or Japanese type, as well as European type plug pins that are form part of the device cover.
The SCO notes that the national standard AS/NZS 3112 “Approval and Test Specification – Plugs and Socket-Outlets” is going to be amended to clarify the requirement regarding detachable plug portions used in equipment.
All manufacturers and suppliers of power supplies, battery chargers, and similar equipment with integral pins should pay attention to the bulletin and the upcoming changes in Australia and New Zealand.
India印度
印度发布《手电筒 (质量控制) 命令,2025年》
2025年1月21日,DPIIT发布了正式的《手电筒 (质量控制) 命令,2025年》,计划于2025年7月21日起实施。该产品属于 ISI 标志认证范围。
On January 21, 2025, DPIIT released the official 《Flashlight (Quality Control) Order, 2025》, which will be in force after 6 months from the date of publication of QCO (= 2025/07/21). It’s under ISI mark approval.
Mexico墨西哥
墨西哥发布交流感应电动机标准草案
[法规草案] 墨西哥发布PROY-NOM-016-ENER-2024 标准草案, 适用于三相鼠笼异步交流感应电动机,连续工作,使用空气冷却,可以水平或垂直安装,具有单一转速频率,开环或闭环控制系统,功率范围从0.746千瓦到373千瓦,可配置2、4、6或8极,至少标明的额定电压高达 600V, 且在墨西哥境内进口、制造或销售。
Mexico published draft Mexican Official Standard PROY-NOM-016-ENER-2024. This draft Mexican Official Standard establishes the minimum energy efficiency values, test method, marking requirements and conformity assessment procedure.
It applies to electric continuous duty, air-cooled, horizontally or vertically mounted, single rotational frequency (rotational speed of the motor shaft or axis), open- or closed-loop, three-phase squirrel-cage asynchronous AC induction motors with a rated output of 0.746 kW to 373 kW, 2, 4, 6 or 8 poles and at least a marked rated voltage of up to 600 V, which are imported, manufactured or marketed within the United Mexican States.
The following are excluded from the scope of this draft Mexican Official Standard: Electric motors that require auxiliary or additional cooling equipment.
China Taiwan 中国台湾
2026年7月1日起实施「应施检验电动车充电设备商品之相关检验规定」
为了确保电动车充电设备的安全并保障消费者权益,BSMI 将目前属于自愿性产品认证 (VPC) 范畴的电动车充电设备 (功率 ≤ 30kW) 纳入强制性检验的范围内。BSMI 提供两种合格评定程序,供申请人选择: 产品认证注册 (RPC) 或 型式认可批次检验 (TABI)。
详情请参考此链接。
Electric Vehicle Charging Equipment is becoming popular in household and indoor parking environments.
To ensure the safety of Electric Vehicle Charging Equipment and protect consumer rights, the BSMI includes Electric Vehicle Charging Equipment (less than or equal to 30 kW), which is currently subject to Voluntary Product Certification (VPC) into the scope of mandatory inspection of the BSMI. Two alternative conformity assessment procedures are made available for the choice of applicants, i.e. Registration of Product Certification (RPC) or Type-Approved Batch Inspection (TABI).
For details, please refer to this link.
China Taiwan 中国台湾
2026年7月1日起实施「应施检验电力转换系统商品之相关检验规定」
为了实现 2050 年净零碳排放的目标,预期再生能源发电设备和储能系统将逐步安装于室外场域,也将延伸至室内家庭与工厂环境。考虑到电力转换系统 (PCS) 是储能系统的关键组件,为了确保消费者安全,BSMI 已将 PCS 纳入强制性检验范围。
表列商品检验方式采型式认可逐批检验或验证登录双轨并行. 详情请参考此链接 。
To achieve net-zero carbon emissions by 2050, it is expected that renewable energy power generation equipment and energy storage systems will gradually be installed not only at outdoor sites but also in indoor households and factories. Considering that the Power Conversion System (PCS) is a critical component of energy storage systems, the BSMI includes PCS in the mandatory inspection scope to ensure consumer safety. Two
alternative conformity assessment procedures are made available for the choice of applicants, i.e. Registration of Product Certification (RPC) or Type-Approved Batch Inspection (TABI).
For details, please see the link.
推荐文章
关注我们
4001183833 / 8009993668
Service-gc@tuv.com
www.tuv.com
德国莱茵TÜV是一家国际领先的技术服务供应商。在全球近60个国家和地区设有500多个分支机构,拥有超过20,000名员工,服务涵盖工业服务与信息安全,交通服务,产品服务,管理体系服务和莱茵学院与生命关怀。自1872年成立以来,我们一直为解决人类、环境和科技互动过程中出现的挑战,提供安全的、可持续的解决方案。作为一个独立、公正和专业的机构,我们长期致力于营造一个同时符合人类和环境需要的美好未来。
热门分享