德国莱茵TÜV认证 TÜV Rheinland Accreditation

Chile智利

智利SEC认证更多新标准开始强制，TÜV莱茵资质已扩充

智利电力和燃料监管局 (SEC) 近两年陆续发布及更新了许多认证决议，TÜV莱茵智利分公司以及TÜV 莱茵大中华实验室第一时间启动资质扩充申请，目前已就大部分热门电子电器产品取得了SEC授权的发证资质及测试资质，详细信息请参考此连结。

德国莱茵TÜV致力于帮助客户的产品顺利进入全球市场提供一站式的测试认证服务，如果您有任何疑问，请与TÜV莱茵公司全球市场准入服务专家联系，我们的国际认证专家将为您的产品提供最佳解决方案。

Chilean Superintendence of Electricity and Fuels (SEC) has released and updated many resolutions in the past two years.  TÜV Rheinland Chile S.A. and TÜV Rheinland Great China laboratories have obtained the certification & testing qualification from SEC for most of the electrical & electronic equipment. Please refer to this link for more details.

TÜV Rheinland Great China laboratories can provide one-stop service with local testing and certification. Manufacturers are more than welcome to contact TÜV Rheinland experts for further information.

 

Gulf Countries 海湾联盟

GSO IEC 60335-2-24:2024 (家用制冷设备、冰淇淋设备和制冰机) 新版标准执行时间通知

海湾阿拉伯国家合作委员会标准化组织 (GSO) 发布通知，于2024年1月31日正式采用新版标准IEC 60335-2-24:2020 (家用制冷设备、冰淇淋设备和制冰机) 。其对应的GSO标准为GSO IEC 60335-2-24:2024，并将于2026年2月1日强制实施。

基于旧版标准获取的G-Mark证书有2 年过渡期，并须在2026年1月31日之前完成更新。未依规定在时间内完成更新的证书将被暂停直至完成标准更新。

TÜV莱茵是海湾G-mark、巴林能效、阿曼能效和阿曼低电压产品的符合性评定机构 (Notified Body – 0007)。我们可以为出口到中东市场的产品提供全面的市场准入解决方案。如果您对此有任何疑问或需要进一步咨询，请随时联系德国莱茵TÜV。

GSO has announced the adoption of IEC 60335-2-24:2020 (Edition 8) standard.  GSO has officially adopted the standard as GSO IEC 60335-2-24:2024, effective from 31st January 2024.

GSO IEC 60335-2-24:2024 will become mandatory on 1st February 2026 after a 2-year transition period. G-Mark certificates obtained based on the old standard must be updated before January 31, 2026. Certificates that are not updated within the specified time will be suspended until the standard update is completed.

 

India印度

TÜV莱茵印度班加罗尔网络安全实验室现已成为 NCCS MTCTE 计划下的指定实验室

TÜV莱茵印度班加罗尔实验室获批成为印度国家通信安全中心 (NCCS) 授权的电信安全测试实验室，加上之前已经获批的TEC的测试资质，让我们可以帮助您依照 MTCTE 计划满足测试要求。

TÜV Bangalore Cyber Security Lab is now a NCCS Designated lab under MTCTE scheme. TÜV Group is positioned as a one-stop solution provider for all scopes under TEC/NCCS.

  

资讯 / 电信 ITE / Telecom

Brazil巴西

巴西ANATEL法案第2436号，于2024年3月10日生效

CPE类产品的信息安全评估于2024年3月10日开始强制，对于测试报告的强制日期延迟到7月6日。在3月20日，ANATEL发布官方通知，专门用于企业使用的CPE设备豁免该法规。

ANATEL Act nº 2436 with cyber security requirements for assessing the conformity of CPE (Customer Premises Equipment) became in force on March 10th, 2024. This Act establishes a set of mandatory cybersecurity requirements CPE devices used to connect to the Internet service provider’s network, such as:

1. a) Cable modem;
2. b) xDSL modem;
3. c) ONU, ONT;
4. d) Router or modem intended for fixed wireless access (FWA – Fixed Wireless Access);
5. e) Router or modem for fixed broadband access via satellite;
6. f) Wireless router or access point.

There are some main topics  to the Official Letter nº 83 released by ANATEL on March 9th:

• ANATEL will accept to homologate new devices and renew certificates without the Cyber security testing, as long as the applicant approved formally the project to OCD (give the formal acceptance to OCD proposal) until Mar 9th. In these cases, applicant will need to present the cyber security testing report until July 6th, 2024. If applicant fail to present the report until this date, ANATEL will suspend the certificate.
• This exception is an alternative to applicants and if this option is adopted, the applicant will need to sign a declaration letter committing to present the cyber security report until the deadline defined by ANATEL and, in case of failure during the testing, remove all units sold to Brazil market or arrange a recall of those units, according to the conditions described in the Brazilian Consumer Law.
• Reinforce that new approvals or renewals started as for Mar 10th will need to present the cyber security testing report without any exception to obtain the ANATEL approval

On March 20th，ANATEL released the Official Letter nº 100 explaining that the cyber security testing does not apply to devices exclusively for use in corporative environmental.

 

Brazil 巴西

[法规草案] 巴西发布教育用互动屏幕认证要求，第9号公众咨询

2024 年 2 月 26 日，巴西国家电信局 (ANATEL) 发布了关于教育用交互式屏幕认证要求的第 9 号公众咨询，为归类为教育用途交互式屏幕的设备的合格评定制定最低技术要求。

目前该草案正在搜集意见中，至 2024 年 5 月 5 日为止。

On 26 February 2024, the Brazil National Telecommunications Agency (ANATEL) published Public Consultation No. 9 on Requirements for Certification of Interactive Screens for Educational Use.

The Draft Act proposed by the Consultation aims to establish minimum technical requirements for conformity assessment of equipment classified as an interactive screen for educational use, according to the scope defined in item 3.

These requirements apply to products of the interactive screen type for educational use, for installation in classrooms or an environment of equivalent purpose, characterized as equipment with a screen that is sensitive to the touch of the finger, a specific pen or other object; wireless internet connection; with an operating system containing multidisciplinary applications following the pedagogical, technological and accessibility criteria established by the competent authority and which allows the installation of external applications.

Comments should be submitted by 05.05.2024.

 

India印度

TEC将MTCTE下Wi-Fi CPE和IP路由器的强制安全测日期试从2024年4月1日延长至2024年7月1日

TEC发布通知，NCCS COMSEC 计划下的安全测试的生效日期延长 3 个月。 对于所通知的产品类别，WiFi CPE 和 IP 路由器，目前的生效日期为 2024 年 7 月 1 日。

尽管强制日期已延长，但 NCCS 将接受制造商和申请人的自愿安全认证 (VSC) 申请。

TEC extended the mandatory security testing of Wi-Fi CPEs and IP Routers under MTCTE from April 1, 2024 to July 1, 2024

TEC issued an announcement that the effective date for security testing under NCCS’s COMSEC scheme is extended for a period of 3 months. The effective date now stands on 1st July 2024 for the notified product categories, WiFi CPE and IP Routers.

Although the mandatory date has been extended, NCCS would be accepting voluntary applications for Voluntary Security Certification (VSC) from manufacturers and applicants.

 

India印度

电信部MTCTE发布了关于第三阶段和第四阶段产品修订规则的新通知，将10种产品 (ER) 的强制日期从 2024年4月1日延长至 2024年8月1日

电信部MTCTE于2024年4月1日发布了关于第三阶段和第四阶段产品修订规则的新通知，将10种产品 (ER) 的强制日期从 2024年4月1日延长至 2024年8月1日 (再延长 4个月)

Department of Telecommunication, MTCTE (Mandatory Testing and certification of Telecommunication Equipment) has issued a new notification on amended rules for Phase-III & IV products on 01 April 2024. The main highlight is – extension of Mandatory dates for 10 products (ER’s) covered under Phase-III & IV of MTCTE from 01 April 2024 to 01 August 2024 for another 4 months.

 

Iraq伊拉克

伊拉克实施了新的产品标签要求，须单独以阿拉伯语或阿拉伯语与英语一起书写

伊拉克中央标准化和质量控制组织 (COSQC) 对进入伊拉克市场的产品实施了新的标签要求。

• 阿拉伯语标签强制性：自 2024 年 5 月 14 日起，在伊拉克销售的所有商品都必须单独以阿拉伯语或与英语一起书写。
• 适用于所有产品类型：这一要求包括所有寻求进入伊拉克市场的产品，无论其类别如何。
• 分阶段实施：新标签规则适用于2023年5月21日之前发布的国家和工厂标准、实验室规范和技术法规的修订。

The Central Organization for Standardization and Quality Control of Iraq (COSQC) has implemented new labeling requirements for products entering the Iraqi market.

• Arabic labeling mandatory: As of May 14, 2024, all products sold in Iraq must be labeled in Arabic, either solely or alongside English.
• Applies to all product types: This requirement encompasses all products seeking access to the Iraqi market, regardless of category.
• Phased implementation: The new labeling rule applies to amendments of national and factory standards, lab specifications, and technical regulations issued before May 21, 2023.

 

Malaysia马来西亚

马来西亚MCMC发布了新的2024年第1号Class assignment

主要变化为新增卫星广播接收频段和更新49MHz感应设备的功率限值。

Malaysia MCMC had issued the new Class Assignment which is No 1 of 2024.

This Class Assignment replaced the previous Class assignment which is No1 of 2023 that was issued in August of 2023.

The main changes for this 2024 are on nineteenth schedule.

There are also some minor changes on twenty-seventh schedule.

Nineteenth Schedule changes (Satellite Broadcasting Receiver Device )

Newly added receiver frequency   12.443 GHz to 12.497 GHz and this is for Berjaya Construction Berhad. Previously it is for Smart Digital International Sdn. Bhd.  Under 12.568 GHz to 12.622 GHz.

Due to this the Space station (network Service provider) also change.

Twenty-Seventh Schedule changes (Inductive Applications Device)

Item no 16)   49 MHz the maximum power change from   -2.8 dBuA/m at 10 m to 18.02 dBμA/m at 10m.

In Summary, the changes won’t affect most of the type approval product for consumer and industrial use. The new assignment is mandated since March 2024.

 

Saudi Arabia沙特阿拉伯

SASO已在官方公报上公布了电磁兼容性技术法规，实施日期为2024年5月17日

SASO已在官方公报上公布了电磁兼容性技术法规。该技术法规将涵盖以下产品以外的所有电气产品的 EMC 要求。

不在范围内的产品：

– 无线电设备和电信终端设备

– 航空导航设备及其备件

– 业余爱好者使用的电信设备

– 由专家使用于研发目的的电子板

– 医用器材

– 辐射电磁场太低而不会与其他电磁场产生干扰的设备

制造商可根据法规中提到的标准出具 DoC来验证法规的符合性。

该法规的实施日期为2024年5月17日。

SASO has published the technical regulation of electromagnetic compatibility in official gazette. This TR will cover EMC requirements of all electrical products except below products.

Products out of scope :

-Radio Equipment and Telecommunication Terminal Equipment

-Aerial navigation devices & their spare parts

-Telecommunication devices used by amateurs

-Electronic boards used by experts for research & development purposes

-Medical equipment

-Equipment that their radiated electromagnetic field are too low to cause interference with other EM fields

Conformity of the regulation can be verified by manufacturer DoC as per mentioned standards in the regulation. Once issued, it will be an additional requirement to be considered during approval, similar to Rohs.

Implementation date will be May 17th 2024 .

 

Saudi Arabia沙特阿拉伯

SASO发布了电气和电子设备待机、关机功耗技术法规，并于2024年4月1日起执行。

SASO发布了电气和电子设备待机、关机功耗技术法规，并于2024年4月1日起执行。

产品范围:

• 适用产品: 电子显示类产品 (含电视和显示器)
• 豁免产品: 可视区域面积小于100cm2 的显示类产品，投影仪， 会议展示系统/会议屏，医疗显示器，VR产品，控制用显示屏

法规要求:

沙特电子电器类产品能效参考引用了 欧盟 Lot 6 + Lot 26待关机指令 以及  (EU) 2019/2021 针对电子显示类产品的指令内容。针对电子显示类产品，Technical 内容可分为: 一般要求 (Lot 6 + Lot 26) + 针对此产品类别的特殊要求 (EU) 2019/2021，如有矛盾点，以特殊要求为准。

更多TÜV莱茵专家的最新技术解读请参考此连结。

SASO has issued the technical regulation of standby, off-mode Electric power Consumption of Electrical and Electronic Equipment. The enforcement date is April 1^st, 2024.

Product Scope:

• Applicable products: electronic display products (including TVs and monitors)
• Exempted products: display products with a viewing area less than 100cm2, projectors, conference display systems/conference screens, medical monitors, VR products, control displays

Regulatory requirements:

The energy efficiency reference for Saudi electronic and electrical products refers to the EU directive  Lot 6 + Lot 26 Standby and odd-mode and the (EU) 2019/2021 directive for electronic display products.

For electronic display products, technical content can be divided into sections: General requirements (Lot 6 + Lot 26) + Special requirements for this product category (EU) 2019/2021. If there is any conflict, the special requirements shall prevail.

For more technical interpretations by TÜV Rheinland experts, please refer to this link.

 

Thailand 泰国

[法规草案] 泰国5.925 – 6.425 GHz频段使用的电信设备技术标准草案 (NBTC MT 1039-256X)

2024 年 2 月 29 日，泰国国家广播和电信委员会 (NBTC) 办公室提议发布关于 5.925 – 6.425 GHz 频段使用的电信设备的强制性技术要求的公告。技术标准NBTC MT 1039-256X草案建议就同一事项修订技术标准NBTC TU 1039-2566。

该标准草案适用于两种类型的电信设备：基本单元/接入点和移动/便携式单元。

标准草案拟修订以下规定，但不限于：

• 使用宽带无线接入技术以无线电局域网 (RLAN) 的形式添加新的电信频段：

o 输出功率必须具有等效各向同性辐射功率 (E.I.R.P.)，在建筑物内外以及频频宽度小于 20 MHz 的输出功率不得超过 25 mW。

• 同一部分还插入了12.5 mW/MHz的新最大功率谱密度值;和
• 在无线电频谱接入协调标准上添加对 6 GHz WAS/RLAN 标准 ETSI EN 303 687 V1.1.1 的引用。

目前该草案正在搜集意见中，截止日期为 2024 年 5 月 1 日。如果获得批准，该标准草案将在正式发布之日生效，届时技术标准NBTC TU 1039-2566将被废除。

On 29 February 2024, the Thai Office of the National Broadcasting and Telecommunications Commission (NBTC) proposed an announcement on the mandatory technical requirements for telecommunications equipment used in the frequency bands 5.925 – 6.425 GHz. The draft technical standard NBTC MT 1039-256X proposes to revise the technical standard NBTC TU 1039-2566 on the same matter.

The draft standard applies to telecommunications equipment of both types: base unit/access point and mobile/portable unit.

The draft standard proposes to revise the following provisions but is not limited to:

• Add a new frequency band of telecommunications using Broadband Wireless Access technology in the form of Radio Local Area Network (RLAN):
  • output power must have an Equivalent Isotropically Radiated Power (e.i.r.p.) with not more than 25 mW inside the building and outside of the building and for those with frequency bands width less than 20 MHz.
• A new maximum power spectral density value of 12.5 mW/MHz has also been inserted in the same section; and
• Add the reference to the standard ETSI EN 303 687 V1.1.1 of 6 GHz WAS/RLAN on Harmonised Standard for Access to Radio Spectrum.

The deadline for comments is 1 May 2024. If approved, the draft standard will enter into force on the day of its official publication, whereupon technical standard NBTC TU 1039-2566 will be repealed.

 

UAE 阿联酋

阿联酋电信和数字政府监管局 (TDRA) 于 2024 年 2 月 2 日发布了高级移动定位技术规范 (TS FS 004,1.0 版)

本技术规范适用于用于公共移动无线电通信系统的行动终端以及蜂巢网络中的服务。高级移动定位 (AML) 用于协助紧急呼叫，所有移动电话都必须支持 AML 功能。

自 2024 年 3 月起，所有进入阿联酋的手机都必须符合这些技术规范。

The Telecommunications and Digital Government Regulatory Authority (TDRA) in UAE published the Technical Specification on Advanced Mobile Location (TS FS 004, Version 1.0) on February 2, 2024. The Technical Specification applies to Mobile Terminals for use in the Public Mobile Radio Communication System as well as services in Cellular Networks. Advanced Mobile Location (AML) is used to assist with emergency calls, and all mobile handsets must support AML features.

Effective March 2024, all mobile handsets entering the UAE must be compliant with these Technical Specifications.

 

家用电器 House Appliances

South Korea韩国

[法规草案] 韩国2024年第2024-167号通知草案：能效标签和标准法规拟议修正案 – 关于扩大符合能效标准的产品，包括电动衣柜、电饭锅、电暖器、坐浴盆和电炉

2024年2月23日，韩国贸易、工业和能源部 (MOTIE)  提议对《效率管理机械、设备或材料条例》进行修订。该修正案扩大了能源效率管理系统的目标，并加强了某些产品类别的能源效率标准。具体变更如下：

1. 将电动衣柜(一种可干燥, 除臭, 除皱的衣物管理设备)新增到能效评级系统(MEPS)目标产品，预计2025年7月1日实施。
2. 现有能效评级系统(MEPS)中的电饭锅和电暖器加强能源效率标准要求，预计2025年1月1日实施。
3. 将待机功耗降低方案(E-Standby)中的电动坐浴盆转移到能效评级系统(MEPS)体系，预计2025年7月1日实施。
4. 能效评级系统(MEPS)中的电炉新增消费效率等级应用，预计2025年1月1日实施。

目前该草案正在搜集意见中，截止日期为 2024 年 3 月 31 日。

On 23 February 2024, the South Korean Ministry of Trade, Industry and Energy (MOTIE) proposed an amendment to the Regulations on Efficiency Management Machinery, Equipment, or Materials.

The amendment expands the targets under the energy efficiency management system and strengthens energy efficiency standards for certain product categories. The specific changes are as follows:

1. The amendment adds clothes management machinesto the targets for the energy efficiency rating system. The covered product categories include:

• Clothes management machines capable of drying textile products, removing wrinkles, and deodorizing them.
• These products shall display information such as one-time power consumption and annual energy cost on the front of the product.

The effective date of the revisions for the products above is 1 July 2025.

2. Energy efficiency standards for electric rice cookersand electric heaters, which are existing efficiency management equipment, would be strengthened as follows:

• Electric rice cookers:
  • Upward revision of minimum consumption efficiency standards and efficiency grade standards.
  • Improvement of efficiency measurement standards reflecting actual user environments.
• Electric heaters:
  • Changing the minimum consumption efficiency standard from 0.8 to 0.84.
  • Changing the label display item from power consumption to heating efficiency to facilitate easier comparison of efficiency between products.

The effective date of the revisions for the products above is 1 January 2025.

3. The amendments transfer electric bidetsand electric ranges, which were subject to standby power reduction and minimum consumption efficiency, to the energy efficiency rating system as follows:

• Electric bidets:
  • These products shall be transferred from the subject of the standby power reduction system to the consumption efficiency grading system.
  • Establishing standards for measuring power consumption in operating modes such as washing water discharge and electric heating standby mode.
• Electric ranges:
  • These products shall be transferred from the subject of the minimum consumption efficiency system to the consumption efficiency grading system.
  • Improvement of efficiency measurement standards reflecting actual user environments.

The effective date of the revisions for electric bidets shall be 1 July 2025, while the revisions for electric ranges shall take effect on 1 January 2025.

Opinions on this draft amendment may be submitted until March 31, 2024.

 

Saudi Arabia沙特阿拉伯

沙特SASO发布大容量空调能效标准更新草案

沙特SASO于2024年3月4日向WTO提交了大容量空调标准SASO 2874的修订草案的公众咨询, 并计划在正式版发布18个月后生效.

SASO submitted DRAFT OF UPDATING OF SASO 2874/0000-LARGE CAPACITY AIR CONDITIONERS – PERFORMANCE REQUIREMENTS AND METHODS OF TESTING to the WTO for public consultation on March 4, 2024, and will take effect 18 months after the release of the official version.

 

Serbia塞尔维亚

塞尔维亚494/2024号法案：家用烤箱、炉灶和抽油烟机的生态设计要求

2024 年 2 月 14 日，塞尔维亚能源和矿业部长通过了一项法案，规定了家用烤箱、炉灶和抽油烟机的生态设计要求。

该法案自 2024 年 2 月 22 日起生效，过渡期持续到 2024 年 9 月 1 日，之后应被视为必须遵守该法案。

On 14 February 2024 Serbia’s Minister of Energy and Mining adopted a Pravilnik prescribing ecodesign requirements for domestic ovens, hobs and cooker hoods.

This Pravilnik determines ecodesign requirements for the placing on the market or the putting into service of domestic ovens (including when incorporated in cookers), domestic hobs and domestic electric range hoods, including when sold for non-domestic purposes.

The provisions of this Pravilnik are modelled on Regulation (EU) No 66/2014. Specific ecodesign requirements are listed in Annex 1. Annex 2 determines methods for measurements and calculations of relevant parameters. For the purposes of conformity assessment and the procedure for verifying compliance with the requirements of this Pravilnik, measurements and calculations are carried out on the basis of Serbian standards, or on the basis of other reliable, accurate and repeatable methods.

Conformity assessment must be carried out by way of the procedure of internal design control or the management system procedure.

Effective since 22 February 2024, a transitional period runs until 1 September 2024, after which compliance with this Pravilnik should be regarded as mandatory.

 

Serbia塞尔维亚

塞尔维亚495/2024号法案：空调和舒适风扇的生态设计要求

2024 年 2 月 5 日，塞尔维亚能源和矿业部长通过了一项法案，规定额定容量为 ≤12 kW 的市电供电空调以及带有电风扇功率输入≤125W 的舒适风扇的生态设计要求。

该法案自 2024 年 2 月 22 日起生效，过渡期持续到 2024 年 9 月 1 日，之后应被视为必须遵守本规定。

On 5 February 2024 Serbia’s Minister of Energy and Mining adopted a Pravilnik prescribing ecodesign requirements for electric mains-operated air conditioners with a rated capacity of ≤ 12 kW for cooling, or heating if the product has no cooling function, and comfort fans with an electric fan power input ≤ 125W.

The provisions of this Pravilnik are modelled fully on Regulation (EU) No 206/2012. The ecodesign requirements for air conditioners and comfort fans are set out in Annex I, compliance with which should be measured and calculated in accordance with requirements set out in Annex II.

Conformity assessment must be carried out by way of the procedure of internal design control or the management system procedure.

Effective since 22 February 2024, a transitional period runs until 1 September 2024, after which compliance with this Pravilnik should be regarded as mandatory.

 

Singapore新加坡

新加坡CPSO澄清可折叠电动洗衣机和可折叠电水壶均属可折叠产品，属于CPSR 的管控范围

新加坡CPSO 于2024年2月15日发布通知，澄清可折叠电动洗衣机和可折叠电水壶均属可折叠产品，这些可折叠产品与传统的不可折叠产品具有相同功能，落入CPSR 的管控范围。

自2025年2月17日起，可折叠电动洗衣机和可折叠电水壶需要在CPSR下注册并贴上安全标志才能在新加坡供应。这些产品必须符合与传统的不可折叠产品相同的注册安全标准。

Singapore CPSO announced clarification regarding the testing, certification and registration requirements for collapsible electric washing machines and collapsible electric kettles under the Consumer Protection (Safety Requirements) Regulations (CPSR).

With effect from 17th Feb 2025, collapsible electric washing machines and collapsible electric kettles will need to be registered under the CPSR and affixed with the Safety Mark before they can be supplied in Singapore. These products shall comply with the same safety standards required for registration of their conventional, non-collapsible counterparts:

• Collapsible washing machines will need to comply with IEC 60335-2-7, which is the applicable IEC standard for registration of electric washing machines.
• Collapsible liquid heating appliances will need to comply with IEC 60335-2-15, which is the applicable IEC standard for registration of electric kettles.

 

UAE阿联酋

阿联酋发布UAE.S 5010-3:2024家用制冷器具新能效标准，计划于2025年2月1日起强制

阿联酋MoIAT于2024年1月26日发布1号法令，计划在标准正式发布 (2024年1月31日) 1年后强制使用新的家用制冷器具的能效标准UAE.S 5010-3:2024。

MoIAT through the technical program of committee has prepared the UAE Standard No. UAE.S 5010-3:2024: “Labeling – Energy Efficiency Label for Electrical Appliances – Part 3: Part 3: Household Refrigerating Appliances”.

This standard has been approved as Emirates Technical Regulation by Decree of UAE Cabinet No. 1/2024, issued on 26 January 2024.

Decree of UAE Cabinet No. 1/2024 related to adoption of the latest EER Standard for Household Refrigerating Appliances gives 365 days to update and comply with the latest UAE.S 5010-3:2024 standard.

 

灯具 / LED Luminaiaries/LED

Bahrain巴林

巴林发布照明产品能效技术法规

巴林王国在 2024 年 3 月 14 日第 3735 期官方公报第25号决议中发布了以下法规：

国家照明产品能效技术法规- 照明产品的能源效率、功能和要求第 1 部分和第 2 部分

执行日期定为自官方公报发布之日起 12 个月内。

原2015年第（3）号决议关于批准非定向家用照明灯具法规的规定同时废止。

目前过渡安排和具体实施措施尚未公布。

The Kingdom of Bahrain has published in its Official Gazette Issue No. 3735 of Mar. 14, 2024 the following regulation:

Resolution No. (25) of 2024

Issuing the National Technical Regulations for Energy Efficiency of Lighting Products

– ENERGY EFFICIENCY, FUNCTIONALITY AND REQUIREMENTS FOR LIGHTING PRODUCTS Part 1 and Part 2

The enforcement dates have been set as 12 months starting from the publication in the Official Gazette.

The previous Resolution No. (3) of 2015 approving the regulation of non-directed home lighting lamps will be cancelled.

Transitional arrangements and detail implementation measures have not been announced at this time.

 

Vietnam越南

越南科学技术部颁布了第 367/QD-BKHCN 号决定，修订和补充采用 LED 技术的照明产品组

2024 年 3 月 12 日，越南科学技术部颁布了第 367/QD-BKHCN 号决定，以修订和补充附件中包含的采用 LED 技术的照明产品组。

《决定》对附件进行了修改，将科技部管理的多项采用LED技术的照明产品纳入其中，纳入了HS编码、国家相关技术法规（QCVN）和进口货物管理办法。

产品包括：

• 在大于50V的电压下工作，用于一般照明的内置镇流器的LED灯泡;
• 设计用于取代直管荧光灯泡的双头LED灯泡;
• 便携式LED电灯;和
• 固定普通LED电灯。

本决定于2024年3月12日生效。

On 12 March 2024, the Vietnamese Ministry of Science and Technology enacted Decision No. 367/QD-BKHCN to amend and supplement the group of lighting products with LED technology contained in the Annex.

The Decision amends the Annex to include a number of lighting products with LED technology under the management of the Ministry of Science and Technology, HS codes, relevant national technical regulations (QCVN) and management measures for imported goods.

The products include:

• LED bulbs with built-in ballasts for general lighting work at voltages greater than 50V;
• double-ended LED bulbs that are designed to replace straight tube fluorescent bulbs;
• portable LED electric lights; and
• fixed common LED electric lamps.

This Decision entered into force on 12 March 2024.

 

 

能源效率要求 Energy Efficiency Requirements

Chinese Hong Kong中国香港

香港机电工程署发布了新版<产品能源标签实务守则 2024>，将于2024年6月30日生效

香港机电工程署于2024年3月8日发布了新版<产品能源标签实务守则 2024>，新版本守则旨在提高冷冻器具、洗衣机和储水式电热水器的能源效益标准，将在2024年6月30日生效。

Hong Kong has issued Circular No. 1/2024 – Mandatory Energy Efficiency Labelling Scheme Specified Person to Update Efficiency Labelling Grading.

This Circular supplement the gazette notice published on 8 March 2024 (G.N. 1313) regarding the issue of approved Code of Practice on Efficiency Labelling of Products (CoP) 2024 and the updating notice to specified persons of refrigerating appliances, washing machines and storage type electric type water heaters on 8 March 2024.

The effective date will be 30 June 2024.

 

Israel以色列

[法规草案] 以色列能源法 拟议修正案 – 关于进口电气产品，即使没有符合欧洲进口要求的声明

作为 2021 年 11 月 18 日生效的第 5749-1989 号能源法第 3 号修正案的一部分，寻求进口和销售该法第三修正案中列出的电气设备的进口商或制造商必须遵守欧洲关于能源效率和待机模式下的供应要求。该修正案简化了进口商和制造商的流程，即使没有符合欧洲合法进口要求的声明，也允许进口电气产品，前提是提供证明产品在欧洲合法销售的文件。

The purpose of amending the law is to reduce the cost of living by reducing the regulation that applies to the import of electrical products. As part of the Energy Sources Law (Amendment No. 3), 2021 of November 18, 2021, which amended the Energy Sources Law, 1989, the possibility of importing electrical products through the “European route” was established. This route makes it possible to import products that meet the European import legal requirements regarding energy efficiency, by attaching the manufacturer’s statement.

The proposed amendment of the law seeks to create additional reliefs, by way of parallel routes, which will allow the import of electrical products, even in the absence of a declaration of compliance with the legal European import requirements, provided that documents are provided that testify to the legal marketing of the product in Europe.

Interested parties could provide their comments before 21 March 2024.

 

Chinese Taiwan 中国台湾

2024年第11304000870号令: 轴流式风机节能标章能源效率基准与标示方法

2024年2月23日，台湾经济部能源局发布了《轴流式风机节能标章能源效率基准与标示方法令》。该命令适用于遵守有关最低能效、能效等级标签和风机检查公告的轴流式风机。该命令规定，范围内的产品应符合CNS 7778或ISO 5801或AMCA 210的要求。风扇效率等级应根据 ISO 12557 计算。

该命令于 2024 年 7 月 1 日生效，同时将废除 2013 年第 10205010211 号命令。

On 23 February 2024, the Taiwanese Bureau of Energy, Ministry of Economic Affairs published an Order on the energy efficiency criteria and labelling method for energy label qualified for axial fans.

The Order applies to axial flow fans which adhere to the announcement on the minimum energy performance, energy efficiency rating labelling and inspection of fans. The Order applies to axial fans with impeller diameters of 125mm to 2000mm, rated power ranging from 0.75 kW to 200 kW, static pressure of 147 Pa to 9807 Pa and airflow of 10 m3 per minute or 3000 m3 per minute, and those approved by the ministry.

The Order specifies that products in scope should comply with the requirements under CNS 7778 or ISO 5801 or AMCA 210. Fan efficiency grades shall be calculated in accordance with ISO 12557.

Additionally, the Order outlines the following provisions for axial fans:

Conditions and test methods for determining the energy efficiency;

The implementation date of energy efficiency labelling; and

Requirements for safety standards.

Furthermore, the Order stipulates that the axial fans should conform to the labelling requirements:

The name and address of the label user should be declared on the product or its packaging;

If the label user is a distributor, then the name and address of the manufacturer of the product shall be displayed on the product or its packaging;

Information on the rated power consumption (kW), power factor, impeller diameter and nominal airflow shall be marked on the product catalogue; and

The measurement of the impeller diameter is rounded off to the nearest 10 digits and other measurements for the specifications for the axial fans are rounded off to the first decimal point.

The Order enters into force on 1 July 2024 and at the same time will abolish Order No. 10205010211, 2013.

 

 

电池 Batteries

China中国

[法规草案] 中国提出电动自平衡车和电动自平衡车和踏板车中使用的锂离子电池和电池的安全技术规范标准草案。

2024年3月12日，中国国家标准化监督管理总局 (SAC) 和中国国家市场监督管理总局 (SAMR) 通过中国工业和信息化部 (MIIT) 的公告，提出了电动自平衡车和电动自平衡车和踏板车中使用的锂离子电池和电池的安全技术规范标准草案。

如果获得批准，标准草案应在正式发布后12个月生效。原有标准GB/T 34668-2023和GB/T 40559-2021自实施日起废止。

目前该草案正在搜集意见中，至 2024 年 5月 10日为止。

On 12 March 2024, the China Standardisation Administration (SAC) and the Chinese State Administration for Market Regulation (SAMR), through an announcement from the Chinese Ministry of Industry and Information Technology (MIIT), proposed a draft standard for the safety technical specification for electric self-balancing vehicles and for lithium ion cells and batteries used in electrical self-balancing vehicles and scooters.

If approved, the draft standard shall enter into force 12 months after its official publication. Upon commencement, the previous standards GB/T 34668-2023 and GB/T 40559-2021will be abolished.

The deadline for comments is 10 May 2024.

 

 

其他 / 多主题产品 Others / Products with Multiple Subjects

India印度

能源局自2024 年 3 月 1 日起将整装锅炉纳入自愿性计划 36，以及将商用饮料柜纳入自愿性计划 37

能源局自2024 年 3 月 1 日起，将整装锅炉纳入自愿性计划 36，以及将商用饮料柜纳入自愿性计划 37。

BEE incorporated Packaged Boiler under Voluntary  scheme schedule 36 and Commercial Beverage Coolers under Voluntary  scheme schedule 37 since 01 March 2024.

 

India印度

印度工业和国内贸易促进部发布多项质量控制令，将于2024年9月5日纳入ISI 标志强制施行

印度工业和国内贸易促进部发布多项质量控制令，将于2024年9月5日纳入ISI 标志强制施行

• 《冷风扇和空气过滤器 (质量控制) 令, 2023年》6个月后纳入ISI 标志强制施行 ( = 2024年9月5日)
• 《电器 – 风扇 (质量控制) 令, 2023年》，将于6个月后纳入ISI 标志强制施行 ( = 2024年9月5日)
• 《商用贩卖器 (质量控制) 令,2023年》，将于6个月后纳入ISI 标志强制施行 ( = 2024年9月5日)
• 《家用衣物洗涤电器 (质量控制) 令, 2023年》6个月后纳入ISI 标志强制施行 ( = 2024年9月5日)

On 05 March 2024 DPIIT has released some orders, which will come into force under ISI mark after 6 months ( = 05 September 2024).

• 《Air Cooler and Air Filters (Quality Control) order, 2023》
• 《Electrical Appliances – Fans (Quality Control) Order, 2023》
• 《Electrical Appliances for Commercial Dispensing and Vending (Quality Control) Order, 2023》
• 《Electrical Appliances for Domestic Clothes Washing (Quality Control) Order, 2023》

 

Ukraine乌克兰

[法规草案] 欧盟与乌克兰计划缔结工业产品符合性、评估和验收协议，优先领域为: 低压设备、电磁兼容性和机械设备

根据欧盟-乌克兰协会协议，将缔结工业产品符合性、评估和验收协议 (ACAA)。根据该协议，欧盟和乌克兰将允许在ACAA附件中列出的符合性要求的工业产品在未经进一步测试或符合性程序的情况下投放市场。

目前，工业生产的三个优先领域为: 低压设备、电磁兼容性和机械设备，签署ACAA的准备工作正在进行中。

乌克兰与欧盟关于工业品合格评定和可接受性的协议 (即ACAA) 所涵盖的领域的符合性标志将是CE标志，并附有欧盟委员会分配的合格评定机构的识别号。

Under the EU-Ukraine Association Agreement, an Agreement on Conformity and Assessment and Acceptance of Industrial Products (ACAA) will be concluded. Under this agreement, the EU and Ukraine will allow industrial products listed in the annexes of the ACAA and that fulfil the requirements of conformity to be placed on either market without further testing or conformity procedures.

Currently, work is underway on preparations for signing the ACAA in three priority sectors of industrial production – low-voltage equipment, electromagnetic compatibility and machinery.

The EU has carried out an inspection of the approximation of Ukrainian legislation in the field of technical regulation to the relevant acts of EU legislation. As a result, on 15 March 2024 Ukraine’s Ministry of Economy issued a draft Resolution to bring the provisions of the following Technical Regulations into accordance with the legislation of the EU in support of the conclusion of the ACAA in the identified priority sectors:

Approving Technical Regulation of Low Voltage Electrical Equipment, Resolution No. 1067, 2015

Approving Technical Regulations on Electromagnetic Compatibility, Resolution No. 1077, 2015

Approving Description and Application Rules of National Mark of Conformity, Resolution No. 1184, 2015.

The main change to be expected to the national measure of low voltage equipment is the requirement for manufacturers and importers to provide the market surveillance body, upon request, with information and documentation (in paper or electronic form) necessary to demonstrate the compliance of electrical equipment with the applicable requirements in a language that is comprehensible to officials exercising surveillance powers.

Resolution No. 1077, 2015 would be amended to clarify that product instructions and information, as well as any labelling, must be clear, understandable and legible. Again, such information and documentation would need to be provided in a language that is comprehensible to officials exercising state market surveillance.

As regards Resolution No. 1184, 2015, reference would be made to two marks of compliance, depending upon whether or not the ACAA has been extended to the industrial sector:

1. For sectors not covered by the agreement between Ukraine and the European Union on conformity assessment and acceptability of industrial goods;
2. For the sectors covered by the agreement between Ukraine and the European Union on conformity assessment and acceptability of industrial goods.

The mark of conformity for the sectors covered by the agreement between Ukraine and the European Union on conformity assessment and acceptability of industrial goods (i.e. the ACAA) would be the CE mark.

The image of the conformity mark can be flat or embossed. For sectors not covered by the agreement between Ukraine and the European Union on conformity assessment and acceptability of industrial goods, the image of the flat mark of conformity is made in two contrasting colours.

In the sectors covered by the ACAA, the conformity mark must be accompanied by the identification number of the conformity assessment body assigned to it by the European Commission.