资讯 / 电信 ITE / Telecom

Argentina阿根廷

阿根廷ENACOM发布决议 1132/2023 – 开放 WiFi 6E

阿根廷国家通信机构(ENACOM)于2023年8月18日发布了Resolution 1132/2023，其中包括以下技术标准:《宽带数字调制设备集成系统》和《跳频设备集成系统》。从2023年8月18日开始，设备可以使用这些标准进行测试，新标准将从2023年11月16日开始实施。Wi-Fi 6E设备 (5925-7125MHz) 现在也可以获得批准。

Argentina ENACOM Releases  Resolution 1132/2023 – open WiFi 6E

Ente Nacional de Comunicaciones (ENACOM) in Argentina published Resolution 1132/2023 on August 18, 2023, which includes the following technical standards: ENACOM-Q2-63.02 V23.1 “Equipment integrating systems of Broadband Digital Modulation;” and ENACOM-Q2-63.03 V23.1 “Equipment integrating systems of Frequency Hopping.” Devices may be tested using these standards starting August 18, 2023, and the new standards will be enforced starting November 16, 2023. Wi-Fi 6E devices are now also able to be approved (5925-7125MHz). See below link:

BOLETIN OFICIAL REPUBLICA ARGENTINA – ENTE NACIONAL DE COMUNICACIONES – Resolución 1132/2023

 

Belarus白俄罗斯

2023年8月14日，白俄罗斯部长会议颁布了第532号决议。批准的技术法规规定了使用新技术的电信设施的合格评定：窄带物联网 (NB-IoT)，新无线电：第五代无线接入技术 (NR) 等。新版本更新了需要CoC (合格证明) 和DoC (符合性声明) 的产品列表。

第532号决议将于2024年2月17日生效。

On 14 August 2023, the Belarusian Council of Ministers enacted Resolution No. 532 amending Resolution No. 469 establishing technical regulations on telecommunication equipment.

The approved technical regulation provides for the conformity assessment of telecommunication facilities using new technologies: Narrow Band Internet of Things (NB-IoT), New-Radio: fifth generation radio access technology (NR) and others.  The new edition updates the list of products subject to certification of conformity and declaration of conformity. Resolution No. 532 will enter into force on 17 February 2024. Refer to below link.

Постановление Совета Министров Республики Беларусь от 14.08.2023 г. № 532

 

China中国

2023年8月10日，国家认证认可监督管理委员会发布强制性产品认证证书、标志管理公告。公告对强制性产品认证 (CCC认证) 作出如下变更:

• CCC认证将全面实行电子证书。根据申请人的要求，认证机构可以出具纸质证书。
• 现有的纸质证书仍然有效，并会通过修改、更新等方式自然过渡为电子证书。纸质证书和电子证书具有同等法律效力。
• CCC证书、标志的制作、使用必须符合附件规定的要求。

本公告自2024年1月1日起施行。

On 10 August 2023, the Chinese Certification and Accreditation Administration published an announcement on the management of compulsory product certification certificates and marks.

The announcement implements Announcement No. 3, 2022 on expanding the application of electronic certificates and the views of the national interoperability and mutual recognition.

The announcement prescribes the following changes to the compulsory product certification (CCC certification):

• The CCC certification would be completely implemented in electronic certificates. The certification agencies will issue paper certificates if requested by applicants.
• The existing paper certificates remain valid and will naturally transition to electronic certificates through modifications, renewals and so on. Both paper and electronic certificates hold the same legal validity.
• The production and use of CCC certificates and marks must comply with the requirements specified in the annexes.

The annexes outline the following provisions:

• Annex 1 stipulates the management requirements for CCC certificates. The certificates shall contain the following information:
  • CCC mark;
  • name of the certificate;
  • certificate number;
  • name and address of the certification commissioner;
  • name and address of the manufacturer;
  • commodity name and series;
  • specifications and models of the commodity;
  • compliance with standards and technical requirements;
  • implementation rules of CCC certification;
  • date of issuance and validity period,
  • QR code for query; and
  • information on the certification agency.
• Annex 2 describes the standard requirement is that the CCC mark is moulded or affixed on the packaging or outer surface of the commodity in a conspicuous manner. In addition to the physical label, the CCC marks can be labelled electronically only for commodities with integrated screens and electronic nameplates. The annex also specifies that the standard CCC marks should be applied to the minimum sales packaging of such commodities.

The announcement enters into force on 1 January 2024 and at the same time, it will repeal Announcement No. 10, 2018.

 

India印度

印度政府对海关税则码8471 的笔记本电脑、平板电脑、一体式个人电脑以及超小型电脑和服务器实施进口限制。为了给业界充分时间准备，该限制进口将于2023年11月1日生效。

通知发布的主要内容:

• HS编码84713010、84713090、84714110、84714120、84714190、84714900和84715000的产品进口将受到限制。
• 进口上述HS编码下的产品需要获得DGFT的进口许可证。
• 制造商必须先获得WPC 的设备型式批准和进口许可证，然后才能向DGFT 提交进口许可证申请。 不接受通过自我声明 (ETA-SD) 进行的设备类型批准。

但是，如果出现以下情况，进口许可条件将被豁免:

• 仅进口 1 台笔记本电脑、平板电脑、一体机和其他此类物品，但不适用于服务器。
• 如果产品 (每批货物最多 20 件) 进口用于研发、测试、基准检验和评估、维修和退货以及产品开发目的。
• 如果产品在国外维修后重新进口。
• 如果该产品是另一种资本品的重要组成部件。

The Government of India introduced restrictions on the import of Laptops, Tablets, all-in-one Personal Computers, and Ultra-Small form factor Computers and Servers categorized under HSN 8471. In order to give time to the industry to prepare, the restriction  on import will go into force on November 1, 2023.

Major highlights of the notification issued:

• Import of products under HS codes 84713010, 84713090, 84714110, 84714120, 84714190, 84714900, and 84715000 will be restricted.
• An import License from DGFT will be required in order to import products under the aforementioned HS codes.
• Manufacturers will have to procure Equipment Type Approval and an Import License from WPC prior to submitting the application for an Import License from DGFT. Equipment type approval through self-declaration (ETA-SD) will not be accepted.

However, the import licensing conditions will be exempted if:

• Only 1 unit of Laptop, Tablet, All in one PC, and other such items are imported. Though, this is not applicable to Servers.
• If the product (up to 20 items per consignment) is being imported for R&D, Testing, Benchmarking and Evaluation, Repair and Return and Product Development purposes.
• If the product is re-imported after being repaired abroad.
• If the product is an essential part of another capital good.

 

Japan日本

日本经济产业省于2023年8月1日针对电安法相关标准公告变更如下:

【别表第十】

为因应国际性技术趋势，针对LED灯和照明器具的电波噪声相关规定自前年开始有进行修订。
这次也针对多媒体设备和家庭医疗设备相关的国际法规如CISPR32等标准也做了相同的审查及修订。修正的详细内容可参考此链接。

【别表第十二】

下列标准有进行新版的修正：

相关内容可参考此链接。

修正后的标准实施日期：2023年8月1日，旧标准可缓冲使用至2026年7月31日。

更多相关的详细内容可参考此链接。
It was announced by METI that Appendix 10 and Appnedix 12 of “About Interpretation of Ministerial Ordinance for Establishing Technical Requirements for Electrical Appliances and Materials” were revised on August 1, 2023.

Detailes for Appendix 10.

Details for Appendix 12. Below stabdards are revised.

The effective date of this revision is August 1, 2023. However, for three years after the revision, it is possible to follow the previous interpretation. Old standards can be applied until July 31, 2026.

More details can be found in this link.

 

Laos老挝

老挝MTC于7月21日发布了第0416号公告，更新了型式批准和标签要求，执行日期为2023年8月4日。其主要变化如下:

• Type2产品 (SRD) 证书会由3年有效改为1年有效，其他证书仍为3年有效。
• 大部分个人消费类及IOT产品需要购买含QR码的标签或是申请E-label (根据实际进口量购买)。

详情见官网链接。

Laos MTC issued the announcement Notification 0416 on 21^st July, updating the type approval and label requirement. The mandatory date is 4^th of August 2023.

One of the main changes is as below:

For type 1 equipment, TA cert and Acknowledgement letter of DoC have 3 years validity.

For type 2 equipment, TA cert and/or Acknowledgement letter of DoC have 1 year validity.

All type 2 products that are submitted before 4^th of August and obtained certificate should be able to remain still 3 years validity, but all certificates obtained after 4^th August will be only with 1 year validity. All previous certificates will remain until the expiry date.

For more details, please refer to this link.

 

电池 Batteries

China Taiwan 中国台湾

2023年8月14日，台湾经济部根据《电器及电子商品标示基准公告》发布关于一次性钮扣型电池的公告。该公告明确规定一次性钮扣型电池为电器及电子商品标示基准所规范具时效性之零组件及耗材，应标明制造年月或年周，并应包括有效日期或有效期间。

该公告自2025年9月1日起施行。

On 14 August 2023, the Taiwanese Ministry of Economic Affairs published an announcement on disposable button cell batteries.

The announcement is based on the announcement on the labelling criteria for electrical and electronic products.

The announcement specifies that disposable button cell batteries are time-sensitive components and consumables. These batteries should be labelled with the year, month or a week of manufacture and shall include the expiration date or validity period.

The announcement enters into force on 1 September 2025.

 

 

家用电器 House Appliances

Brazil巴西

2023年8月9日，巴西国家计量、标准化和工业质量研究所 (INMETRO/CONMETRO) 发布了Portaria No. 266，修订了冰箱及类似产品的合格评定要求。该法规将附录三图 1的冰箱标签的合规期限由原2023年6月30日更新为2023年12月31日。

该Portaria将于2023年9月1日生效。

On 9 August 2023, the Brazil National Institute of Metrology, Standardisation and Industrial Quality (INMETRO/CONMETRO) published the Portaria No. 266, amending the Conformity Assessment Requirements for Refrigerators and Similar Products, approved by the Portaria No. 332 of August 2, 2021.

This Regulation postpones the compliance deadline for distributors and retailers in the domestic market to sell only refrigerators that are labelled in accordance with the criteria contained in Tables 4 and 7 of the RTQ of Annex I, using the ENCE model available in Figure 1 of Annex III.  The deadline had been 30 June 2023, but this is revised to 31 December 2023.

This Portaria will come into effect on September 1, 2023.

 

Brazil巴西

2023 年 8 月 9 日，巴西国家计量、标准化和工业质量研究所 (INMETRO/CONMETRO) 发布了与 Portaria No. 269, 2021 相关的更正，批准了以下修改:

• 在附录一第 3 项规定的清单中增加两个新章节，现在包括: (a) 技术标准 IEC 60335-1: 2016 (5.2 版)和 (b) 技术标准 IEC 60335-2-40: 2018 (6.0版)，关于空调合格评定要求
• 针对上述指定项目的安全测试制定了新的合规要求，自 2025 年 12 月 31 日起，必须采用这些技术标准进行安全测试和验收标准。在此之前，基于技术标准 IEC 60335-1:2010 发布的报告 (5.0 版) 和IEC 60335-2-40: 2013 (5.0 版) 将被接受。

On 9 August 2023, the Brazil National Institute of Metrology, Standardisation and Industrial Quality (INMETRO/CONMETRO) published a correction relating to the Portaria No. 269, 2021, approving the following modifications:

• Addition of two new sections in the list specified in item 3 of Annex I, to now include: (a) Technical standard IEC 60335-1: 2016 (5.2 edition) and (b) Technical standard IEC 60335-2-40: 2018 (6.0 edition), regarding the Conformity Assessment Requirements for Air Conditioners;
• Establishment of new compliance requirements regarding the safety tests for the items specified above, imposing that these technical standards must be adopted for the tests of security and acceptance criteria as of 31 December 2025. Until this date, reports issued based on technical standards IEC 60335-1: 2010 (5.0 edition) and IEC 60335-2-40:2013 (5.0 edition) will be accepted.

 

 

灯具 / LED Luminaiaries/LED

Costa Rica 哥斯达黎加

[法规草案] 2023 年 8 月 18 日，世贸组织发布了G/TBT/N/CRI/200号通知，涉及 RTCR 510:2023 系列灯饰、圣诞装饰品和家用装饰人物、规格和标签草案。

该法令草案的目的是对在哥斯达黎加国内市场上使用或销售的额定电压不超过120V标称值的灯串、圣诞装饰品和家用装饰人物的技术要求制定技术法规，无论是国产的还是进口的。 季节性使用被认为是安装和使用时间不超过90天。

受本技术法规约束的产品的生产商、销售商、进口商必须出示符合性声明。

目前该草案正在搜集意见中。

On 18 August 2023, the WTO published Notification G/TBT/N/CRI/200 relating to draft RTCR 510:2023  Series of lights, Christmas decorations and decorative figures for domestic use, Specifications and Labelling.

The objective of this Draft Decree is to adopt technical regulation on the technical requirements for the strings of lights, Christmas decorations and decorative figures for domestic use whose assigned voltage is not greater than 120 V nominal and that are used or marketed on the national market, whether they are domestically produced or imported. Seasonal use is considered to be a period of installation and use of no more than 90 days.

This technical regulation applies to:

• the strings of lights with inset lamp holders, threaded-base midget lamp holders and miniature threaded-base lamp holders that are connected in series through the use of a line or with candelabra or intermediate threaded-base lamp holders that they are connected in parallel for direct connection use,
• seasonal decorative light units of various shapes, such as crowns, stars, canes, candles or groups of candles without shade, products in the shape or appearance of a Christmas tree that appear to have branches and leaves no greater than 762 mm in height; inflatable figures or air-moulded objects, animated figures, tree tops, controllers, tree stands and decorative motorised indicators,
• Ornamental articles supplied with a connection to a snap-on lamp holder and intended to replace a snap-on lamp in a series-connected decorative-type light string or decorative unit.

This technical regulation does not apply to:

• series that use lamp holders with a size larger than those of the intermediate threaded type for common lighting, products for common use, products that are permanently connected to the power supply, figures without decorative purposes intended for temporary use lighting, extensions, or shunts only,
• products known as nightlights, or flexible lighting items that are not part of a decoration,
• portable electric lamps intended for general lighting in seasonal decoration, no common lampshades with openings at the top and bottom,
• strings of lights, Christmas decorations and decorative figures for domestic use powered by batteries.

Furthermore, producers, sellers, importers of the products subject to this technical regulation, must present the declaration of conformity established in subsection 5.1 of Section 5 on Procedure for the Demonstration of Conformity, approved by Executive Decree No. 37662-MEIC-H -MICIT of 12 December 2012.

The WTO Notification deadline is 17 October 2023, 60 days from notification.

 

 

能源效率要求 Energy Efficiency Requirements

South Korea韩国

[法规草案] 韩国贸易工业和能源部 (MOTIE) 于2023年8月21日发布No. 2023-170效率管理设备操作规程，针对荧光灯的最低能效管理要求分为3组，并拟定了中长期 (2023, 2024, 2025及2027年) 的最低能耗效率标准 (单位: lm/W)。

On 21 August 2023, the Ministry of Trade, Industry and Energy (MOTIE) issued an Efficiency Management Equipment Operation Regulations draft revision of the minimum energy efficiency management requirements for fluorescent lamps are divided into 3 groups, and drawn up the medium and long-term (2023, 2024, 2025 and 2027 year) Minimum Energy Efficiency Standard (unit: lm/W) requirement.

 

China Taiwan 中国台湾

[法规草案] 2023年7月27日，台湾经济部能源局发布公告草案，拟修订《除湿机容许耗用能源基准与能源效率分级标示事项、方法及检查方式》。

本公告所涵盖的除湿机，是指符合CNS 12492中除湿机定义，并经经济部标准检验局认定为上市前须检验的产品。

如获得批准，该公告将于2026年1月1日起施行。

On 27 July 2023, Taiwan Bureau of Energy issued a Draft Announcement regarding the proposed amendments to “Requirements on Minimum Energy Performance Standard and Energy Efficiency Rating Labelling and Inspection for Dehumidifiers”.

The dehumidifiers covered by this Announcement are those that meet the definition of dehumidifiers defined in CNS 12492, and identified by the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) as products requiring inspection before marketing.

The testing and calculation of the energy factor for dehumidifiers must meet the following requirements:

• The tested value of the energy factor (EF) must be tested in accordance with CNS 12492.
• The measured value of EF should be rounded off to the second decimal place and must not be lower than the Minimum Energy Performance Standard (MEPS) of Dehumidifiers (Table 1), and must be greater than 95% of the labeled value of the products.

Before manufacturing or importing dehumidifiers, manufacturers shall submit documents outlined in Section 3 to the central competent authority to register for the account on the Energy Efficiency Rating and Labelling Management System.

When manufacturing or importing dehumidifiers, the manufacturer shall display or place the energy efficiency rating label to the instruction manual, on the product’s smallest sales package of the product, or place it in a prominent area on the front of the product. The label shall be displayed in colour.

If approved, the Announcement will enter into force on 1 January 2026.

 

China Taiwan 中国台湾

2023年7月21日，台湾经济部能源局发布关于通风机容许耗用能源基准、标示事项及检查方式的公告。 本公告适用于额定功率0.75kW (1HP) 至200kW (270HP)、叶轮直径125mm至2000mm、静压147Pa至9807Pa、风量10立方公尺/分钟至3000立方公尺/分钟的三相交流电机驱动通风机。

通风机应根据 CNS 7778 或 ISO 5801 或 AMCA 210 进行测试，以测量能效值。

该公告自2024年7月1日起施行。

On 21 July 2023, the Taiwanese Ministry of Economic Affairs published an announcement on the minimum energy performance, energy efficiency rating labelling and inspection of fans.

The announcement applies to three-phase AC motor-driven fans with rated power 0.75kW (1HP) to 200kW (270HP), impeller diameter of 125mm to 2000mm, static pressure of 147 Pa to 9807 Pa and a capacity of 10 cubic metres per minute (m3/min) to 3000 m3/min as shown in Annex 1 of Part I, which includes:

• Axial flow fans;
• Forward tilt centrifugal fans;
• Radial centrifugal fans;
• Backward tilt centrifugal fans (with housing);
• Backward tilt centrifugal fans (without casing); and
• Mixed-flow fans.

The fans should be tested in accordance with CNS 7778 or ISO 5801 or AMCA 210 for the measure of the energy efficiency values.

The announcement enters into force on 1 July 2024.

 

 

其他 / 多主题产品 Others / Products with Multiple Subjects

India印度

BIS 发布了有关 IS 1293 标准的通知，该标准为“额定电压不超过 250 伏、额定电流不超过 16A 的家用和类似用途插头和插座”。 IS 1293 的2005年和2019年版本并行有效至2023年10月23日。至2023年10月23日后，2005年版本将撤销，2019年版本持续有效，而2015年版不得再进一步延期。

于IS 1293:2005 范围内，但未涵盖在 IS 1293:2019 范围内的产品，只能在 2023 年 10 月 23 日之前生产。

该质量控制令 (QCO) 属于 BIS 认证的方案 I (ISI mark)。
BIS has released a notification regarding the standard IS 1293 for “Plugs and Socket-Outlets for Household and Similar Purposes of Rated Voltage up to and Including 250 Volt and Rated Current up to and Including 16A”.  Both 2005 and 2019 versions of IS 1293 are valid till 23rd October 2023.  After 23rd October 2023, 2005 version will be withdraw and 2019 shall remain in force.  No further extension shall be given in the date of concurrent running of IS 1293.

Varieties which are covered under the scope of IS 1293: 2005 but not covered under the scope of IS 1293: 2019 can only be manufactured up-to 23rd October 2023.

Thus Quality Control Order (QCO) is under scheme-I (ISI mark) of BIS Certification.

Key highlights are as below:

India印度

[法规草案] 印度工业和内部贸易促进部 (DPIIT) 向 WTO 提交《电气配件 (质量控制) 令, 2023》。

电气配件是用于家庭和工业电气布线的物品，例如盒子和外壳、电缆线槽和管道系统、开关、支架、插座、插头、天花板接线盒、保险丝断路器等。

拟议通过日期：电子公报通知日期

建议生效日期：自电子公报通知之日起六个月

India Department for Promotion of Industry and Internal Trade (DPIIT) announces “ Electrical Accessories (Quality Control) Order, 2023” to WTO.
Electrical accessories are the items used in domestic and industrial electrical wiring e.g., boxes & enclosures, cable trunking and ducting system, switch, holder, socket, plug-top, ceiling rose, fuse cut-out etc.

Proposed date of adoption: The date of notification in E-Gazette
Proposed date of entry into force: Six months from the date of notification in E-Gazette

 

South Korea韩国

​韩国国家无线电研究机构 (RRA) 于2023年6月30日发布No.2023-13公告，新增以下两项电动车的无线充电设备纳入KC EMC管控范围:

– 电动汽车无线电力传输设备

– 电动自行车及交通用电设备之无线电力传输设备

以上自公告日起即刻生效，详情可参考此连结。

On 30 June 2023, the National Radio Research Agency (RRA) issued a notice no. 2023-13​, adding two kinds of wireless charging devices into KC EMC mandatory list:

– Electric vehicle wireless power transmission device

– Wireless power transmission devices for electric bicycles and electric equipment for transportation.

This regulation entered into force on 30 June 2023. For details please refer to this link.

 

UAE 阿联酋

阿拉伯联合酋长国工业和先进技术部 (MoIAT) 7月中旬于官网公告，7月15日起需使用UAE PASS登入MoIAT发证网站，原有的登入方式使用账号密码将逐步淘汰。

MoIAT网站账户持有者须先注册 UAE PASS，并与原有MoIAT网站账户绑定后即可透过UAE PASS登入使用。

UAE公民与居民使用的手机APP，可用于国家行政上各项服务。详情可见: https://selfcare.uaepass.ae/

The Ministry of Industry and Advanced Technology of the United Arab Emirates (MoIAT) announced on its official website in mid-July that from July 15, UAE PASS will be required to log in to the MoIAT certifiication website, and the original login method of using account and password will be gradually eliminated.

MoIAT website account holders must first register for UAE PASS, and after binding with the original MoIAT website account, they can log in and use it through UAE PASS.

The mobile app used by UAE citizens and residents can be used for various services in national administration. Details can be found at: https://selfcare.uaepass.ae/