- 13.553 a 13.567 kHz freq. range was added for the use in medical applications, with maximum electric field intensity 20 mV/m at 30 meters.
- Access Points now may operate outdoors in the 5925-7125 MHz frequency band also, if using internal batteries and with a maximum EIRP of 17 dBm.
- the result of the self-ballast lamp test from the Testing Laboratory that has been determined before this Ministerial Regulation came into force, is declared to remain valid for one application of the Energy Saving Certificate;
- Domestic Producers and Importers of self-ballasted lamps who already had the determination of test results before this Ministerial Regulation came into force, must apply for the issuance of Energy Saving Certificates in accordance with the provisions in this Ministerial Regulation within a period of no later than 12 (twelve) months since this Ministerial Regulation came into force.
- TIS 62841 Part 3(13)-2564 on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 3-13: Particular Requirements for Transportable Drills, in accordance with the Industrial Product Standards Act.
- TIS 62841 Part 3(14)-2564 on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 3-14: Particular Requirements for Transportable Drain Cleaners, in accordance with the Industrial Product Standards Act.
- TIS 62885 Part 2-2564 on Dry Vacuum Cleaners for Household or Similar Use – Methods for Measuring the Performance, in accordance with the Industrial Product Standards Act.
- TIS 62885 Part 8-2564 on Surface Cleaning Appliances – Part 8: Dry Vacuum Cleaners for Commercial Use – Methods for Measuring the Performance, in accordance with the Industrial Product Standards Act.
资讯 / 电信 ITE / Telecom
智利SUBTEL 更新 Resolución 1985 Exenta， 这是适用于短距离设备的技术标准。
On July 27, 2021 the authority Subsecretaría de Telecomunicaciones (SUBTEL) in Chile updated the Resolución 1985 Exenta. This is the Technical Standard applicable to Short Range Devices.
Among the few changes, below should be highlighted to our clients:
CITRA 发布了用于型式批准的新规定 (仅限阿拉伯语)。主要变化：
1. 批准有效期从 1 年增加到 3 年
2. 在更新的情况下，批准 ID 保持不变
3. 续展申请只能在到期前 3 个月开始，但不得超过到期后 20 天。 如果在这些限制内没有收到申请，证书将被取消。
CITRA published a new regulation (Arabic only) for type approval. Main changes:
1.Approval validity increased to 3 years from 1 year
2.Approval ID is maintained unchanged in case of renewal
3.Renewal application can only start 3 months before expiry but no more than 20 days after expiry. If no application is received within these limits, the certificate will be cancelled
There is no transition period.
Saudi Arabia 沙特阿拉伯
1. 电气安全标准 EN62368 成为强制性标准。
2. ICT 设备需要在其软件中嵌入 CITC 电子标签作为合规证明；电子标签应贴有型式认可证书编号 (TA xxxx-y)。
There are two updates after the recent changes made by CITC:
1.Electrical safety standard EN62368 becomes mandatory.
2.From now on ICT Equipment is required to have CITC E-Label embedded in their software as a proof of compliance:
The E-label should be affixed with the type approval certificate number (TA xxxx-y).
With ICT Equipment are considered Mobile Phones, Tablets, Mobile Computers, Mobile Routers CPEs, Cellular IoT devices. E-Label also applies to other type of end-products embedding a radio transmitter module.
South Korea 韩国
KC 62368-1 自2021年8月27日发布后，目前韩国发证机构已经接受项目申请，MoU 只接受 IEC 62368-1：2018(第三版) 的CB 转证。
过渡期2022年12月31日前，KC 60065、K 60950-1两个标准仍可接受申请KC转证，
2023年1月1日起， KC 60065、K 60950-1标准失效，只接受KC 62368-1 转证。
2023年1月1日起，需要按照新的KC 62368-1 标准的要求来进行产品变更评估并且更新标准。
旧标准证书升级为KC 62368-1 标准后，是否可以保留原KC证书号，目前发证机构仍在讨论中。
Since the release of KC 62368-1 on August 27, 2021, the Korean certification bodies have accepted project applications, and MoU only accepts CB with third edition (IEC 62368-1:2018).
Before December 31, 2022, it is the transition period. Clients can still use IEC 60065 and IEC 60950-1 to apply for KC 60065 and K 60950-1 certificate. Starting from January 01, 2023, KC 60065 and K 60950-1 standards become invalid; only KC 62368-1 will be accepted. The KC certificate of the old standards will continue to be valid without any changes on the premise of the product.
If there is any change in the product, the product change assessment can be carried out according to the old standards before January 01, 2023, without changing the standard. Starting from January 01, 2023, it is necessary to evaluate product changes and update the standards in accordance with the requirements of the new KC 62368-1 standard.
After the old standard certificate is upgraded to the KC 62368-1 standard, whether the original KC certificate number can be retained is still under discussion by the certification bodies.
TISI 宣布取消原生效日期为 2021 年 8 月 28 日的 TIS 1195-2561 (音频、视频和类似电子设备 – 安全要求)。TISI 稍后将宣布使用 TIS 62368 Book 1-2563 来规范 20 种音频、视频、信息和通信技术产品，作为 TIS 1195-2536 的替代标准，但是 TIS 62368 Book 1-2563的发布时间目前未知，尚需要等待。
TISI has officially announced following notification.
Ministry Rule: Cancellation of Ministry Rule to regulate Industrial products: Audio, Video, and Similar Electronic Apparatus – Safety Requirements B.E. 2564
Summary of announcement:
TISI had previously announced TIS1195-2561 and cancel TIS1195-2536 on March 2, 2021 with effective date of August 29, 2021. With this new ministry rule, TISI announced to cancel TIS1195-2561 with effective date of August 28, 2021.
2) TISI will announce TIS62368 Book 1-2563 to regulate 20 products of audio, video, information and communication technology products at later stage. While waiting for TIS62368 Book 1-2563, TIS1195-2536 will remains its effectiveness.
ACCC announced a new mandatory standard for button/coin batteries. They will become mandatory on 22 June 2022.
The Australian Government has introduced four mandatory standards to reduce the risk of death and injury associated with the use of button and coin batteries. The standards apply to both button cell and coin cell batteries, and to the products that include them. The new standards were introduced on 21 December 2020. There is an 18-month transition period where you can choose to start using the new standards.
家用电器 House Appliances
[法规草案] 2021 年 9 月 2 日，阿根廷国内贸易秘书处提出了一项关于家用便携式和嵌入式电烤箱的能效和性能标签的决议草案。 该草案规定了家用便携式和嵌入式电烤箱的能效要求，第三方发证要求以及标贴使用要求。如果草案被接受，该决议自公布之日起生效。
On 2 September 2021, the Argentine Secretariat for Internal Trade proposed a Draft Resolution on Energy efficiency and Performance Labeling for Portable, Built-in Electric Ovens for Domestic Use.
The draft establishes energy efficiency requirements under Resolution No. 319/1999 for portable, installed, and built-in electric ovens, for domestic use. The requirements will be considered fulfilled if the requirements set forth in this measure are met as well as those established in the IRAM 62414-1 and 62414-2 standards.
The measure sets out labeling and third-party certification requirements, and prohibits the importation and commercialization of these products if they do not comply with the provisions set forth in this draft resolution.
The documentation required for certification must be submitted through the specified online platform.
This Draft holds an Annex that contains all energy efficiency labelling requirements and mentions that the label must be legible and affixed to the front of the electric oven in such a way that it is not obscured or hidden, enabling clear visibility. The label must remain on the product at least until it is purchased by the end-user.
If accepted, the Resolution shall enter into force from the date of its publication.
能源效率局将属自愿计划中的冷藏库、轻型商用空调 (LCAC) ，和冷却器星级评定表之有效期,，延长至 2022 年 12 月 31 日，并建议从 2023 年 1 月 1 日起强制实施星级标签计划。
BEE Extend the validity of the existing star rating table for Deep Freezers, Light Commercial Air conditioners (LCAC), and Chillers under the Voluntary regime until 12/31/2022 and proposes to make the star labeling program mandatory from 01/01/2023
All manufacturers/permittees of Deep freezer and Light Commercial Air conditioners (LCAC) under the S&L program of BEE are hereby informed that the validity of the existing star rating table for Deep freezer and LCAC under the voluntary regime has been extended till 31st December 2022.
For Chillers under S&L program of BEE voluntary regime, the revised sample label validity period would be from 1st January, 2019 to 31st December, 2022.
Also, kindly note that the Star Labeling program for above 3 products are proposed to be made mandatory from 1 January 2023 and all manufacturers are therefore requested to develop requisite infrastructure and seek NABL/ILAC accreditation for in-house test set up as appropriate.
2021 年 9 月 15 日，联邦公报发布了针对家用和商用热水器的强制性要求， 该产品也是落入标准 NOM-003-SCFI-2021范围。 该标准将在发布后 180 天执行，也就是 2022 年 3 月 15 日开始强制。
On September 15th 2021 was published on the Federal Gazette the mandatory standard NOM-003-SCFI-2021, Thermal efficiency of water heaters for domestic and commercial use. Boundaries, testing and labeling methods. This Official Mexican Standard establishes the minimum levels of thermal efficiency that water heaters for domestic and commercial use must meet, the test methods that must be used to verify such compliance, and the requirements that must be included in the label as well as the conformity assessment procedure. The standard will be enforced on 180 days after its publication, which would be around March 15th 2022.
China Taiwan 中国台湾
本次修订将采用的标准修订为 CNS 60335-2-7。 并更新了洗净洗清每公斤衣物所实测耗电量基准值。
Energy Conservation Labelling Program Requirements for Washing Machines – Amendment Order No. 11005006720, 2021
Taiwan’s Bureau of Energy, Ministry of Economic Affairs published an amendment of the Energy Conservation Labelling Program Requirements for Washing Machines, Order No. 11005006720, on 26 August 2021 and it will enter into force on 1 September 2023.
This amendment revised the adopted standard to CNS 60335-2-7. And updated the measured power consumption per kilogram of laundry.
|Type||Washing ratio||Cleansing ration||Dehydration
|The power consumption per kilogram of laundry (kWh/kg)|
|Upright washing machine
(Jet type/Scroll type/Stirring type)
|Drum washing machine||0.6||1.0||45||0.0077|
The energy efficiency labelling of the washing machines must contain the following information:
1. The name and address of the user of the label should be recorded on the product or packaging;
2. For an agent, the manufacturer’s name and address must be recorded on the product or packaging;
3. The energy efficiency value of the product should be indicated on the product catalogue.
The energy efficiency testing of washing machines must comply with the requirements of JIS C9606.
泰国工业部于 2021 年 8 月 31 日发布了家用洗衣机的工业标准 TIS 1462-2562 (2019)。该标准规定了家用洗衣机的能效要求，并将于 2022 年 2 月 27 日起强制执行。
This Ministerial Regulation was published by the Thai Ministry of Industry on 31 August 2021, under the authority of the Industrial Product Standards Act.
The Regulation primarily requires that clothes washing machines for household use must comply with Industrial Standard TIS 1462-2562 (2019) specifying the energy efficiency requirements of said products, and notified by Announcement No. 5990 on 28 October 2020.
The standard will be mandatory with effect from 27 February 2022.
家用冰箱和冰箱冰柜的强制性泰国工业标准 TIS 2186 – 2561 (2018)，已于 2021 年 8 月 29 日起生效。
This Ministerial Regulation was published by the Thai Ministry of Industry on 2 March 2021, under the authority of the Industrial Product Standards Act.
The Regulation requires that certain household refrigerators and refrigerator-freezers, such as refrigerators/freezers using compressed air cooling system and alternating current meet Thai Industrial Standard TIS 2186 – 2561 (2018) specifying the energy efficiency requirements of said products, and are approved in accordance with the Announcement No. 5711 of the Ministry of Industry dated 29 May 2020.
The standard will be of mandatory application with effect from 29 August 2021.
灯具 / LED Luminaiaries/LED
泰国工业部于 2021 年 8 月 31 日发布强制性泰国工业标准 TIS 2779-2562 (2019) 及TIS 2780-2562 (2019)，涉及产品为替代直管形荧光灯的双端LED灯及电压高于 50 V 的一般照明用自镇流 LED 灯，标准将于 2022 年 3 月 29 日生效。
Mandatory Safety Requirements for Double-Capped LED Lamps Designed to Retrofit Linear Fluorescent Lamps and for Self-Ballasted LED-Lamps for General Lighting Services by Voltage Higher than 50 V
The Thai Ministry of Industry published Ministerial Regulation B.E. 2564, 2021 on 31 August 2021, under the authority of the Industrial Product Standards Act.
The Regulation primarily requires that double-capped LED lamps designed to retrofit linear fluorescent lamps meet the Thai Industrial Standard TIS 2779-2562 (2019) specifying the safety requirements of said products, and are approved in accordance with the Announcement No. 5865 of the Ministry of Industry of 10 August 2020.
The Regulation also primarily requires that self-ballasted LED-Lamps for general lighting services by voltage higher than 50 V meet Thai Industrial Standard TIS 2780-2562 (2019) specifying the safety requirements of said products, which are approved in accordance with Announcement No. 5866 of the Ministry of Industry dated 10 August 2020.
Both TIS 2779-2562 (2019) and TIS 2780-2562 (2019) standards will be of mandatory application with effect from 29 March 2022.
能源效率要求 Energy Efficiency Requirements
[法规草案] 智利能源部于2021 年 9 月 8 日向世界贸易组织 (WTO) 通报了一份家用灯能效标签设计更新的文件草案。 向WTO提出意见的截止日期为 2021 年 11 月 7 日。
On 8 September 2021 the Ministry for Energy notified the World Trade Organisation (WTO) of a draft document updating the design of the energy efficiency label of household lamps in order to make it more useful to consumers. The new label aims to better inform consumers about the energy efficiency level of lamps of different technologies. It also specifies the criteria for reporting equivalences with incandescent lamp technology.
Deadline for comments to the WTO is set for November 7, 2021.
The new EE Label applicable for CFL lamps, LED lamps, Fluorescent lamps (single and double cap), halogen tungsten lamp, halogen tungsten lamp with dichroic reflector, and other where the SEC protocols requires the use of this EE Label.
印度尼西亚能源和矿产资源部于2021 年 6 月发布了关于能源消耗设备最低能源性能标准应用的第 14 号条例。该法规要求生产商和进口商替能源回收设备申请 SKEM 标志，以表明该设备符合最低能效限制和标准。能源回收设备上也必须贴有节能标志标签。
第 14 号条例于 2021 年 6 月 22 日生效。
In June 2021, the Indonesian Ministry of Energy and Mineral Resources issued Regulation No. 14 concerning the Application of Minimum Energy Performance Standard for Energy Consuming Equipment.
This Regulation obliges producers and importers to apply the SKEM mark (the next Minimum Energy Performance Standard) to energy recovery equipment to show that the equipment meets the minimum energy efficiency limits and criteria. An Energy Saving Sign Label must also be displayed on energy recovery equipment.
In addition, the Regulation repealed Regulation No. 57/2017 on Minimum Energy Performance Standards and Inclusion of Energy Efficient Labels for Air Conditioning Devices and Regulation No. 18/2014 on the Energy Efficiency Labelling of Self-Ballasted Lamps.
The Certificate of Energy Saving for Air Conditioning Appliances, issued prior to the entry into force of this Ministerial Regulation, is declared to remain valid until the term of the Energy Saving Certificate expires.
At the time this Ministerial Regulation comes into force:
Regulation No. 14 entered into force on 22 June 2021.
[法规草案] 乌克兰能源部于2021 年 9 月 3 日提出修订草案，批准《耗能设备能源标签技术法规》。目前正在收集意见中， 一旦获得批准，该命令将于 2023 年 8 月 1 日生效。
On 3 September 2021, the Ukrainian Ministry of Energy proposed a revised draft Order approving Technical Regulation on Energy Labelling of Energy-consuming Devices. This Technical Regulation is modelled on Regulation (EC) No 2017/1369 of the European Parliament and of the Council of 4 July 2017 setting a framework for energy labelling.
It provides for the labelling of those products and the provision of standard product information regarding energy efficiency, the consumption of energy and of other resources by products during use and supplementary information concerning products, thereby enabling customers to choose more efficient products in order to reduce their energy consumption.
Once approved, the Order will enter into force on 1 August 2023.
Comments and suggestions from individuals and legal entities are accepted until 3 October 2021 in electronic form to the e-mail address email@example.com or firstname.lastname@example.org.
其他 / 多主题产品 Others / Products with Multiple Subjects
泰国工业部于 2021 年 9 月 8 日发布并即日实施一系列新的工业标准:
TIS 62841 Part 3(13)-2564: 关于电动手持工具、移动工具和草坪园艺机械，对可移动钻头的特殊要求。
TIS 62841 Part 3(14)-2564: 关于电动手持工具、移动工具和草坪园艺机械，对可移动排水沟清洁器的特殊要求。
TIS 62885 Part 2-2564: 关于家用或类似用途干式真空吸尘器的性能测量方法。
TIS 62885 Part 8-2564: 关于表面清洁设备 – 商业用干式真空吸尘器的性能测量方法。
The Thai Ministry of Industry issued with immediate effect on 8 September 2021 several Industrial Standards:
阿联酋标准化与计量局Emirates Authority For Standardization & Metrology (ESMA)更名为工业与先进技术部Ministry of Industry and Advanced Technology (MoIAT)。
MoIAT Conformity and Standards eServices Theme Enhancement and Unification
Emirates Authority for Standardization and Metrology (ESMA) has been renamed to Ministry of Industry and Advanced Technology (MoIAT), it has been published Unified theme on Conformity and Standards eServices.
No final certificates will be issued under ESMA anymore. Also, there is no changes in the workflows or processes of issuance.
MoIAT issuance service will be continue as usual, and all issued certificates from now on will follow the new MoIAT format.
The Customs in UAE is already aware of the government rebrand process, there are no issues with valid certificates.
4008831300 / 8009993668